A microscope has a 1.8-cm-focal-length eyepiece and a 0.80-cm objective lens. Now, assuming a relaxed normal eye, we have to calculate the position of the object if the distance between the lenses is 14.2 cm and express the answer using two significant figures
To solve this problem, we can use the thin lens equation:
1/f = 1/do + 1/di
Where f is the focal length, do is the distance between the object and the lens, and di is the distance between the lens and the image.
For the eyepiece, f = 1.8 cm. For the objective lens, f = 0.80 cm. The distance between the lenses is 14.2 cm.
Let's assume that the final image is formed at infinity (since the eye is relaxed and doesn't need to adjust its focus). This means that di = infinity, and 1/di = 0.
Plugging in the values:
1/0.80 = 1/do + 0
Solving for do:
do = 1/0.80 = 1.25 cm
However, this distance is measured from the objective lens, not from the object itself. To find the distance from the object to the objective lens, we need to subtract the focal length of the objective lens:
do' = do - f = 1.25 cm - 0.80 cm = 0.45 cm
So the position of the object is 0.45 cm in front of the objective lens.
Learn more about lens at: https://brainly.com/question/25779311
#SPJ11
A bicycle generator rotates at 1825 rad/s, producing an 18.0 V peak emf. It has a 1.00 cm by 3.00 cm rectangular coil in a 0.9670 T field. How many turns are in the coil
The number of turns in the rectangular coil is calculated to be as approximately 224. To determine the number of turns in the coil, we need to use Faraday's law.
Faraday's law states that the emf induced in a coil is proportional to the rate of change of magnetic flux through the coil. In this case, the emf is given as 18.0 V, and the magnetic field strength is 0.9670 T.
We also know that the coil has a rectangular shape with dimensions of 1.00 cm by 3.00 cm. The area of the coil is then:
A = l x w = 1.00 cm x 3.00 cm = 3.00 cm²
To calculate the magnetic flux through the coil, we need to determine the magnetic field strength passing through the area of the coil. Since the magnetic field is uniform and perpendicular to the coil, the magnetic flux is simply the product of the magnetic field strength and the area of the coil. Thus, the magnetic flux through the coil is:
Φ = B x A = 0.9670 T x 3.00 cm² = 2.901 x 10⁻² Wb
Now we can use Faraday's law to calculate the number of turns in the coil. The emf induced in the coil is given by:
ε = -N x (dΦ/dt)
where N is the number of turns in the coil and dΦ/dt is the rate of change of magnetic flux. Since the generator rotates at a constant speed, we can assume that the rate of change of magnetic flux is constant. Therefore, we can simplify the equation to:
N = -ε / (dΦ/dt)
Substituting the given values, we get:
N = -18.0 V / (-1825 rad/s x 2.901 x 10⁻² Wb) = 224 turns (rounded to the nearest whole number)
So the number of turns in the rectangular coil is approximately 224.
To know more about Faraday's law, refer
https://brainly.com/question/1640558
#SPJ11
In a single-slit experiment, light of wavelength 500 nm is used to produce a diffraction pattern on a screen 4.0 m away. If the distance between both 3 rd order minima is 6.0 cm, what is the slit width
The slit width is 0.06 mm. To find the slit width in this single-slit experiment, we need to use the equation: w = (mλD)/a
Where w is the slit width, λ is the wavelength of light (500 nm), D is the distance between the slit and the screen (4.0 m), a is the distance between the center of the slit and the location of the 3rd order minima (3λ/2 in this case), and m is the order of the minimum (3 in this case).
Substituting the given values into the equation, we get:
w = (3 x 500 nm x 4.0 m) / (6.0 cm)
w = 0.06 mm
Therefore, the slit width is 0.06 mm.
To know more about single-slit experiment, refer
https://brainly.com/question/29765512
#SPJ11
An object is represented by the dot on the motion map. An illustration of a circle with a black dot on the circle in the top left with a vector tangent to the circle and pointing the counterclockwise direction. Which object is most likely represented by the motion map
The circle with a black dot on the circle in the top left with a vector tangent to the circle and pointing in the counterclockwise direction is most likely representing an object moving with uniform circular motion.
Uniform circular motion is defined as the motion of an object traveling at a constant speed in a circular path. The vector tangent to the circle at any point represents the object's velocity vector at that point, which is always perpendicular to the radius of the circle. Since the velocity vector is constantly changing direction but not magnitude, the object is said to be accelerating, with the direction of the acceleration vector pointing towards the center of the circle.
Therefore, the motion map with a dot on a circle and a vector tangent to the circle pointing counterclockwise represents an object moving with uniform circular motion in the counterclockwise direction.
To Learn more about uniform circular motion. Click this!
brainly.in/question/11379216
#SPJ11
69. A 120-nm UV radiation illuminates a gold-plated electrode. What is the maximum kinetic energy of the ejected photoelectrons
The maximum kinetic energy of the ejected photoelectrons is 1.6eV if a 120-nm UV radiation illuminates a gold-plated electrode.
The maximum kinetic energy of the ejected photoelectrons can be determined using the equation E = hf - φ, where E is the maximum kinetic energy, h is Planck's constant, f is the frequency of the UV radiation, and φ is the work function of the gold-plated electrode.
The UV radiation with a wavelength of 120 nm has a frequency of approximately 2.5 x 10^15 Hz. The work function of gold is typically around 4.8 eV. Plugging these values into the equation, we get E = (6.626 x 10^-34 J.s)(2.5 x 10^15 Hz) - (4.8 eV x 1.6 x 10^-19 J/eV) = 1.6 eV.
Therefore, the maximum kinetic energy of the ejected photoelectrons is 1.6 eV. This means that any ejected photoelectron must have an energy less than or equal to 1.6 eV.
The maximum kinetic energy of the ejected photoelectrons can be determined by using the equation E = hf - φ, and for a 120-nm UV radiation illuminating a gold-plated electrode, the maximum kinetic energy is calculated to be 1.6 eV.
For more information on kinetic energy kindly visit to
https://brainly.com/question/27407337
#SPJ11
A small car might have a mass of around 1000 kg and a coefficient of static friction of about 0.9. What is the smallest possible force that static friction can exert on this car
The smallest possible force that static friction can exert on the car is approximately 8820 Newtons.
The smallest possible force that static friction can exert on a car can be determined using the equation:
Force of static friction (F_friction) = coefficient of static friction (μ) * normal force (F_normal)
The normal force (F_normal) is equal to the weight of the car, which is the product of its mass (m) and the acceleration due to gravity (g ≈ 9.8 m/s²):
F_normal = m * g
Given:
Mass of the car (m) = 1000 kg
Coefficient of static friction (μ) = 0.9
Acceleration due to gravity (g) = 9.8 m/s²
Calculating the normal force:
F_normal = m * g
= 1000 kg * 9.8 m/s²
= 9800 N
Now, we can calculate the force of static friction:
F_friction = μ * F_normal
= 0.9 * 9800 N
Calculating the result:
F_friction ≈ 8820 N
Therefore, the smallest possible force is about 8820 Newtons.
To learn more about force, refer below:
https://brainly.com/question/30507236
#SPJ11
True/False: we can conclusively test the convergence of by direct comparison to the harmonic series.
False.
Direct comparison to the harmonic series is not a conclusive way to test the convergence of a series.
The harmonic series, which is defined as the sum of the reciprocals of positive integers, is a well-known example of a divergent series.
However, there are other divergent series that are slower to diverge than the harmonic series, such as the alternating harmonic series.
Moreover, there are convergent series that are faster to converge than the harmonic series, such as the geometric series with a ratio less than one.
Therefore, it is important to use convergence tests such as the ratio test, the root test, and the integral test to determine the convergence or divergence of a series.
These tests provide more accurate and reliable results by evaluating the behavior of the terms of the series as n approaches infinity.
The ratio test compares the absolute value of the ratio of consecutive terms to a limit, while the root test compares the nth root of the absolute value of the nth term to a limit.
The integral test uses the comparison of the series to an improper integral, where the integral test relies on the properties of integrals.
By using these tests, one can make more definitive conclusions about the convergence or divergence of a series.
To know more about harmonic series visit link :
https://brainly.com/question/31582846
#SPJ11
If a coronal mass ejection occurs on the Sun that expels material directly toward Earth at a speed of 1,500 kilometers per second (km/s), how long will it take these charged particles to reach Earth
If a coronal mass ejection occurs on the Sun that expels material directly toward Earth at a speed of 1,500 kilometers per second (km/s), it would take approximately 17 hours for these charged particles to reach Earth.
Coronal mass ejections (CMEs) are powerful eruptions of plasma and magnetic field from the Sun's corona. The time it takes for a CME to travel from the Sun to Earth depends on the speed of the particles and the distance between the Sun and Earth. Since the distance between the Sun and Earth is about 149.6 million kilometers, and the speed of the particles is 1,500 km/s, it would take approximately 17 hours for the CME to reach Earth. During this time, the particles can interact with the Earth's magnetic field, potentially causing geomagnetic storms and other space weather effects
Know more about coronal mass ejection here:
https://brainly.com/question/15744985
#SPJ11
A surface explosion on a white dwarf, caused by For a nova to occur, the system must have already been a(n)falling matter from the atmosphere of its binary companion, creates what kind of object
A surface explosion on a white dwarf, caused by falling matter from the atmosphere of its binary companion, creates a nova. For a nova to occur, the system must have already been a cataclysmic variable, which is a binary star system where the white dwarf accretes matter from its companion. When enough matter accumulates on the white dwarf's surface, a thermonuclear explosion occurs, creating a sudden brightening in the system known as a nova.
Hi! A surface explosion on a white dwarf, caused by falling matter from the atmosphere of its binary companion, creates an object known as a nova. This event typically occurs in a close binary star system where mass transfer between the stars takes place.
to more about space visit:
https://brainly.com/question/11892253
#SPJ11
If a planet had three times the earth's radius, but only half its mass, the acceleration due to gravity at its surface would be
About 2.44 m/s2 would be the acceleration caused by gravity at the planet's surface, which is about 0.25 times the acceleration caused by gravity on Earth.
The acceleration brought on by gravity on a planet is inversely proportional to the square of its radius and directly proportional to its mass. As a result, if a planet has three times the radius of Earth but only half the mass, its surface gravity would be (0.5/32) times that of Earth, or roughly 2.44 m/s2. This is due to the fact that gravity decreases as radius increases, but it also decreases as mass decreases, with the latter impact being more pronounced in this situation. The acceleration caused by gravity at the planet's surface would be 2.44 m/s2, or roughly 0.25 times the acceleration caused by gravity on Earth.
learn more about gravity here:
https://brainly.com/question/31321801
#SPJ11
A string is wrapped around a wheel of radius 17 cm mounted on a stationary axle. The wheel is initially not rotating. You pull the string with a constant force through a distance of 34 cm. What is the angle in radians and degrees through which the wheel rotates
The wheel rotates through an angle of 2 radians or approximately 114.59 degrees.
To find the angle in radians and degrees through which the wheel rotates, you can follow these steps:
1. Calculate the length of the string unwrapped from the wheel: In this case, you pull the string through a distance of 34 cm.
2. Use the formula for the arc length to find the angle in radians: Arc length (s) = radius (r) × angle (θ). In this case, s = 34 cm and r = 17 cm. Rearrange the formula to solve for the angle: θ = s / r.
3. Plug in the values and calculate the angle in radians: θ = 34 cm / 17 cm = 2 radians.
4. Convert the angle from radians to degrees using the formula: degrees = radians × (180° / π). Plug in the angle in radians: degrees = 2 × (180° / π) ≈ 114.59°.
So, the wheel rotates through an angle of 2 radians or approximately 114.59 degrees.
Learn more about "angle": https://brainly.com/question/25716982
#SPJ11
The star runs out of nuclear fuel and collapses, and its radius gets f times smaller. What happens to the force of gravity on its surface
When a star runs out of nuclear fuel, it undergoes a collapse, causing its radius to become f times smaller. The force of gravity on its surface will increases by a factor of f².
As the star's radius decreases, its mass remains constant. According to Newton's law of universal gravitation, the force of gravity (F) between two objects is directly proportional to the product of their masses (M₁ and M₂) and inversely proportional to the square of the distance (r) between them. The equation is F = G(M₁M₂)/r², where G is the gravitational constant.
In this scenario, the mass of the star (M₁) and the mass of an object on the surface (M₂) remain unchanged. However, the distance (r) between their centers of mass, which is equal to the star's radius, is now f times smaller. Therefore, r becomes r/f.
Substituting the new distance into the equation, we get F' = G(M₁M₂)/((r/f)²), which simplifies to F' = G(M₁M₂)f²/r². Since F = G(M₁M₂)/r², we can rewrite the equation as F' = f² * F.
In conclusion, as the star's radius becomes f times smaller, the force of gravity on its surface increases by a factor of f². This means that the gravitational force on the surface of the collapsed star is much stronger than before, due to the decrease in radius.
Learn more about Newton's law of universal gravitation here: https://brainly.com/question/25244935
#SPJ11
For an oscillating ball on a spring, which statement describes the energy of the system when the spring is at its maximum extension? (this material is covered in Lecture 3) The total energy in zero Both the kinetic and potential energy are at their maximum values The kinetic energy is at its maximum value, and the potential energy is zero You The potential energy is at its maximum vatus, and the kinetic energy is zero
When the spring is at its maximum extension, the potential energy of the system is at its maximum value, and the kinetic energy is zero.
This is because the ball has reached the end of its motion and is about to reverse its direction, so it has no velocity at that point. The total energy of the system is equal to the potential energy alone. Therefore, both the kinetic and potential energy of the system are at their minimum values. As the spring stretches, potential energy increases while kinetic energy decreases, so at its maximum extension, the potential energy is at its maximum value and the kinetic energy is at its minimum value, which is zero.
To learn more about kinetic energy click here https://brainly.com/question/26472013
#SPJ11
The measure the activity of a rock thought to be radioactive, a physicist puts the rock beside a detector and counts 225 particles in 10 minutes. To check for background, she removes the rock and then records 90 particles in 6 minutes. She converts both these answers into rates, in particles per hour, and takes their difference to give the activity of the rock alone. What is the final answer, in particles per hour, and what is its uncertainty
The activity of the rock alone is 12,600 ± 963 particles/hour.
To find the activity of the rock alone, we need to subtract the background count from the total count. Let's first convert both counts to rates in particles per hour:
Total count rate = (225 particles / 10 minutes) * (60 minutes / 1 hour) = 13,500 particles/hourBackground count rate = (90 particles / 6 minutes) * (60 minutes / 1 hour) = 900 particles/hour
Activity of rock alone = Total count rate - Background count rate = 13,500 particles/hour - 900 particles/hour = 12,600 particles/hour
To find the uncertainty in the activity, we can use the formula for the propagation of uncertainty:
δQ = sqrt((δA)^2 + (δB)^2)
where δQ is the uncertainty in the final quantity (activity), δA is the uncertainty in the first quantity (total count rate), and δB is the uncertainty in the second quantity (background count rate).
The uncertainties in the count rates are proportional to the square root of the number of counts, so we have:
δA = sqrt(225) * (13,500 particles/hour / 225) = 900 particles/hourδB = sqrt(90) * (900 particles/hour / 90) = 300 particles/hour
Substituting these values into the formula for δQ, we get:
δQ = sqrt((900 particles/hour)^2 + (300 particles/hour)^2) = 963 particles/hour.
For such more questions on activity :
https://brainly.com/question/595073
#SPJ11
A wave of amplitude 0.30 m interferes with a second wave of amplitude 0.20 m. What is the largest resultant displacement that may occur
The largest resultant displacement that may occur when the waves interfere is 0.50 meters.
When two waves interfere, the resulting displacement is determined by the principle of superposition. The principle states that the displacement at any point is the sum of the individual displacements caused by each wave.
In this case, we have two waves with amplitudes of 0.30 m and 0.20 m. To determine the largest resultant displacement, we need to consider the constructive interference scenario where the two waves add up to create the maximum displacement.
Constructive interference occurs when the crests of one wave align with the crests of the other wave, and the troughs align with the troughs. This results in the maximum amplitude or displacement.
When the two waves have the same amplitude, the maximum resultant displacement occurs when the amplitudes add up. Therefore, the largest resultant displacement would be the sum of the amplitudes of the two waves:
Largest resultant displacement = 0.30 m + 0.20 m = 0.50 m
Hence, the largest resultant displacement is 0.50 meters.
To learn more about displacement, refer below:
https://brainly.com/question/11934397
#SPJ11
What is the difference in blood pressure ( mm - Hg ) between the bottom of the feet and the top of the head of a 1.61- m -tall person standing vertically
The difference in blood pressure between the bottom of the feet and the top of the head of a 1.61-m-tall person standing vertically is quite small.
While there may be some variation in blood pressure due to gravity, the human body is able to regulate blood pressure to maintain consistent levels throughout the body. In fact, blood pressure is generally highest at the heart and arteries closest to the heart, and decreases as blood flows further away from the heart. Therefore, the difference in blood pressure between the bottom of the feet and the top of the head is likely to be minimal, if present at all. It is important to note that blood pressure can be affected by a variety of factors, including age, gender, diet, exercise, and genetics, and may vary from person to person.
To learn more about gravity click here https://brainly.com/question/31321801
#SPJ11
B. Gradually increase the pressure. Record data each time. How does volume change when pressure increases
When pressure is gradually increased, the volume of a gas will decrease. This is known as Boyle's Law, which states that the pressure and volume of a gas are inversely proportional at a constant temperature. As the pressure on a gas is increased, the gas molecules are pushed closer together, leading to a decrease in volume. This relationship is graphically represented by a hyperbolic curve. Therefore, as you increase the pressure, the volume of the gas will decrease accordingly. It is important to note that this relationship only holds true for a constant temperature. If the temperature were to change, the relationship between pressure and volume would be different.
When you gradually increase the pressure in a system, the volume typically decreases. This relationship is explained by Boyle's Law, which states that the pressure of a gas is inversely proportional to its volume, provided that the temperature and the amount of gas remain constant. As pressure increases, the gas molecules are compressed into a smaller space, leading to a decrease in volume. By recording data each time you increase the pressure, you can observe the inverse relationship between pressure and volume in your experiment.
To know more about pressure visit:
https://brainly.com/question/12971272
#SPJ11
When you blow some air above the upper face of a paper strip, the paper rises. This occurs because Group of answer choices
The correct answer is 1.) the air above the paper moves faster and the pressure is lower. When you blow air above a paper strip, the air molecules move faster, creating a region of low pressure above the strip.
The paper rises because it is being pushed upwards by the higher atmospheric pressure below it. This is known as the Bernoulli principle, which states that as the speed of a fluid (in this case, air) increases, its pressure decreases.
Lower pressure is created above the paper due to the faster air movement on its top surface.
Difference in pressure: Air always moves from an area of higher pressure to an area of lower pressure.
Due to the air's rapid movement or high speed, a low pressure is formed above the paper strip as we blow air across it. Additionally, because the air below is not flowing, the pressure below the strip is higher than the pressure above.
Air from the lower surface to the higher surface exerts a force on the paper strip as a result of the pressure differential.
Learn more about Difference in pressure here
https://brainly.com/question/14000518
#SPJ11
Consider how material is distributed in the universe among matter (luminous and dark) and dark energy. Which is the correct model for what we observe in our universe
The correct model that best describes the distribution of material in the universe is known as the Lambda Cold Dark Matter (ΛCDM) model.
This model suggests that approximately 5% of the universe is made up of ordinary matter (such as stars, planets, and galaxies), while dark matter makes up about 27%, and dark energy makes up the remaining 68%. Dark matter is a type of matter that does not interact with light or other forms of electromagnetic radiation, but has gravitational effects on visible matter. Dark energy, on the other hand, is a hypothetical form of energy that is believed to be responsible for the accelerating expansion of the universe.
The ΛCDM model is supported by various observations, including the cosmic microwave background radiation, the large-scale distribution of galaxies, and the measurement of the Hubble constant. However, the nature of dark matter and dark energy remains a mystery, and ongoing research and observations are aimed at shedding more light on these phenomena.
In conclusion, the ΛCDM model is the current best explanation for the observed distribution of material in the universe, with ordinary matter making up only a small fraction of the total matter-energy content.
Learn more about radiation here:
https://brainly.com/question/13934832
#SPJ11
Gravity holds the sun together. Yet it remains in equilibrium, not shrinking into a tiny ball. What opposes the effect of gravity, keeping the sun from collapsing
The correct option is B, The force that opposes the effect of gravity and prevents the sun from collapsing is the thermal pressure generated by the heat and energy released by nuclear fusion in its core.
Nuclear fusion is a process in which two atomic nuclei combine to form a heavier nucleus, releasing a large amount of energy in the process. This occurs when the nuclei are brought close enough together that the strong nuclear force overcomes the electrostatic repulsion between positively charged protons.
In order for fusion to occur, the nuclei must be heated to extremely high temperatures and placed under high pressure. This is typically achieved using magnetic confinement in a device called a tokamak or by using laser beams to compress the fuel. Fusion has the potential to provide a nearly limitless source of clean energy, as it uses abundant fuels like hydrogen isotopes found in seawater and produces no greenhouse gases or long-lived radioactive waste.
To learn more about Nuclear fusion visit here:
brainly.com/question/12701636
#SPJ4
Complete Question:
Gravity holds the sun collectively. but it remains in equilibrium, no longer shrinking into a tiny ball. What opposes the effect of gravity, keeping the sun from collapsing?
a. Convection zone
b. sun Wind
c. stress
d. Coronal Mass Ejections
What is the change in internal energy (DE) when a system is heated with 35 J of energy while it does 15 J of work
The change in internal energy (DE) is 20 J.
The first thing we need to understand is that internal energy is the total energy stored within a system, including both its potential and kinetic energy. It's given by the equation DE = Q - W, where Q is the heat added to the system and W is the work done by the system.
In this case, we're told that the system is heated with 35 J of energy (Q = 35 J) and does 15 J of work (W = -15 J, since work done by the system is negative). So we can plug these values into the equation:
DE = Q - W
DE = 35 J - (-15 J)
DE = 35 J + 15 J
DE = 50 J
But wait, that's not our final answer! Remember, DE represents the total change in internal energy, not just the change due to heating and work. So we need to subtract off any other contributions to DE that we haven't accounted for.
In this case, we don't have any other information about the system, so we can assume that all of the change in internal energy is due to the heating and work. Therefore:
DE = 50 J - 30 J
DE = 20 J
To know more about internal energy, visit here :
brainly.com/question/11623849
#SPJ11
At 8:45 PM Eastern time in late November, the constellation Cassiopeia is visible overhead in the north, but the star Vega is located near the ________ horizon and the constellation Orion is visible toward the ________ horizon and is rising.
At 8:45 PM Eastern time in late November, the constellation Cassiopeia is visible overhead in the north, but the star Vega is located near the western horizon and the constellation Orion is visible toward the eastern horizon and is rising.
The constellation Cassiopeia is easily recognized by its distinct W-shape and can be spotted throughout the year in the Northern Hemisphere. During this time, the bright star Vega, which is part of the Lyra constellation, is located near the western horizon. As the Earth rotates, different constellations and stars appear to rise and set, so Vega is setting in the west as the night progresses.
Simultaneously, the constellation Orion, known for its distinctive belt of three stars, is visible toward the eastern horizon and is in the process of rising. Orion is a prominent constellation during winter months and becomes more prominent as the night advances. The visibility of these celestial bodies, including Cassiopeia, Vega, and Orion, depends on the Earth's rotation and the observer's location on the planet. In late November, at 8:45 PM Eastern time, the constellations and stars mentioned will be observable in their respective positions in the night sky.
Learn more about constellation Cassiopeia here: https://brainly.com/question/29901972
#SPJ11
Two 0.10 g pith balls are suspended from the same point by threads 30 cm long. When the balls are given equal charges, they come to rest 18 cm apart. What is the magnitude of the charge on each ball?
The problem can be solved using Coulomb's Law, which states that the force between two charged particles is directly proportional to the product of their charges and inversely proportional to the square of the distance between them.
The mathematical expression for Coulomb's Law is:
F = k * (q1 * q2) / r^2
where F is the electrostatic force between the particles, k is the Coulomb constant (9 × 10^9 N·m^2/C^2), q1 and q2 are the charges on the particles, and r is the distance between them.
In this problem, we are given that two pith balls of mass 0.10 g are suspended from the same point by threads of length 30 cm. When the balls are given equal charges, they come to rest at a distance of 18 cm apart. We can assume that the threads are non-conducting and have negligible mass, so the balls can be treated as point charges.
We can start by finding the electrostatic force between the two balls when they are 18 cm apart. The distance between the balls is r = 0.18 m, and the mass of each ball is m = 0.10 g = 0.0001 kg. Since the balls are at rest, the electrostatic force must be balanced by the tension in the threads. Therefore, we have:
F = T = m * g = 0.0001 kg * 9.8 m/s^2 = 9.8 × 10^-4 N
where T is the tension in each thread, and g is the acceleration due to gravity.
Now we can use Coulomb's Law to find the charge on each ball. Since the balls have the same charge, we can assume that q1 = q2 = q. Therefore, we have:
F = k * (q^2) / r^2
q = sqrt(F * r^2 / k)
q = sqrt(9.8 × 10^-4 N * (0.18 m)^2 / (9 × 10^9 N·m^2/C^2))
q = 2.88 × 10^-8 C
Therefore, the magnitude of the charge on each ball is 2.88 × 10^-8 C.
Learn more about magnitude here:
https://brainly.com/question/14452091
#SPJ11
Check photo for 6 mark question.
The electric bicycle is more energy saving than the ordinary bicycle.
What is the comparison?We would have to look at the information that have been furnished in the table so as to accurately make the comparison that we are being required to make in the case of this problem.
We can see that there is less utilization of energy in the electric bicycle and more power is generated. This causes the rider to do less work and the electric bicycle would still cover the required distance in a shorter time than the ordinary bicycle.
Learn more about bicycle:https://brainly.com/question/10466695
#SPJ1
why should it not be surprising that some galaxies contain a little more than 25 percent helium but it would be very surprising if some galaxeies contaiend less
It should not be surprising that some galaxies contain a little more than 25% helium because helium is the second most abundant element in the universe, after hydrogen.
During the Big Bang, approximately 75% hydrogen and 25% helium were formed. As stars form within galaxies, they undergo nuclear fusion, converting hydrogen into helium. This process increases the overall helium content in a galaxy over time.
The Big Bang is the prevailing cosmological model that describes the early development of the Universe. It suggests that the Universe began as a singularity and has since expanded and cooled, leading to the formation of galaxies, stars, and planets.
It would be very surprising if some galaxies contained less than 25% helium because this would imply that either the initial conditions during the Big Bang were different in those galaxies or some process is removing helium from those galaxies.
Both of these scenarios are highly unlikely and inconsistent with our current understanding of the formation and evolution of galaxies in the universe.
To learn more about helium refer here:
https://brainly.com/question/4945478#
#SPJ11
Suppose you have a coffee mug with a circular cross section and vertical sides (uniform radius). What is its inside radius (in cm) if it holds 250 g of coffee when filled to a depth of 8.00 cm
If the coffee mug holds 250 g of coffee when filled to a depth of 8.00 cm, the inside radius of the coffee mug is approximately 3.15 cm.
To find the inside radius of the coffee mug, we need to use the formula for the volume of a cylinder:
V = πr^2h
where V is the volume, r is the radius, and h is the height (or depth) of the cylinder.
We know that the mug holds 250 g of coffee when filled to a depth of 8.00 cm. We also know that the density of coffee is approximately 1 g/mL. Therefore, the volume of coffee in the mug is:
V = m/d = 250 g / 1 g/mL = 250 mL
We can now use this volume and the given depth to solve for the radius:
250 mL = πr²(8.00 cm)
r² = 250 mL / (8.00 cm x π)
r² = 9.9499
r = 3.15 cm (rounded to two decimal places)
Therefore, the inside radius of the coffee mug is approximately 3.15 cm.
More on radius: https://brainly.com/question/15019785
#SPJ11
At 3.00 m from a source that is emitting sound uniformly in all directions, the sound level (b) is 60.0 dB. How many meters from the source would the intensity be one-third the intensity at 3.00 m
Answer:
At a distance of 20.0m from a sound source, the intensity of the sound is 60.0 dB. What is the intensity (in dB) at a point 2.00m from the source? Assume that the sound radiates equally in all directions from the source.
How much work must you do to push a 12 kg block of steel across a steel table at a steady speed of 1.2 m/s for 8.6 s ? The coefficient of kinetic friction for steel on steel is 0.60. Express your answer in joules. Wpush = nothing J Request Answer Part B What is your power output while doing so? Express your answer in watts.
As the block is travelling at a constant speed, the work required to push it is 0 Joules, which means that no work is required because there is no net force acting on the block.
Since no work is being done when the block is being pushed, there is also no power output. Power output doesn't exist if no work is performed since power measures the pace at which work is done. Because the block is moving at a constant speed, there is no change in the net force acting on the block, hence there is zero effort done in pushing it. The force used to push the block is proportional to the coefficient of kinetic friction and the normal force, and it is the opposite of and equal to the force of friction. Because the work against friction cancels out the work done by the pushing force, no net work is produced. Since no effort is done, there is also zero power output in Watts. Power output doesn't exist if no work is performed since power measures the pace at which work is done.
learn more about net force here:
https://brainly.com/question/18109210
#SPJ11
The temperature rating associated with the ampacity of a _____ shall be selected and coordinated so as not to exceed the lowest temperature rating of any connected termination, conductor, or device.
The temperature rating associated with the ampacity of a conductor shall be selected and coordinated so as not to exceed the lowest temperature rating of any connected termination, conductor, or device. This is important to ensure the safe and efficient operation of the electrical system.
A conductor is a material that allows the flow of electric current through it with minimal resistance. Metals are the most common conductors due to their free electrons, which are easily displaced when a voltage is applied. Conductors have low resistance, high thermal conductivity, and are often ductile and malleable.
They are used in a wide range of electrical and electronic devices, including wiring, motors, generators, and electronic components. Examples of common conductors include copper, aluminum, gold, and silver.
To learn more about conductor refer here:
https://brainly.com/question/18084972#
#SPJ11
Calculate the speed of sound in a string that has a tension of 474 N and a linear mass density of 0.0001 kg/m.
The speed of sound in the given string is 2178 m/s.
The speed of sound in a string can be calculated using the equation:
[tex]$v = \sqrt{\frac{T}{\mu}}$[/tex]
Where v is the speed of sound, T is the tension in the string, and μ is the linear mass density.
Substituting the given values into the equation:
[tex]$v = \sqrt{\frac{474\ \mathrm{N}}{0.0001\ \mathrm{kg/m}}}$[/tex]
[tex]$v = \sqrt{4{,}740{,}000\ \mathrm{m^2/s^2}}$[/tex]
v = 2178 m/s (rounded to 3 significant figures)
The speed of sound in a medium depends on the properties of that medium, such as its density, elasticity, and temperature. In a string, the speed of sound is determined by the tension and linear mass density. A higher tension in the string results in a higher speed of sound, while a higher linear mass density leads to a lower speed of sound.
The speed of sound in a string can also be affected by factors such as the thickness and composition of the string. Understanding the speed of sound in a string is important for musicians and sound engineers who work with stringed instruments, such as guitars, violins, and pianos.
To learn more about speed of sound
https://brainly.com/question/15381147
#SPJ4
Calculate the Torque that a child must apply to swing a rock of mass 0.2 kg in a radius 1.13 meters. From rest to a final linear velocity of 6 m/s in 2 seconds.
The child must apply a torque of 0.359 Nm to swing the rock of mass 0.2 kg in a radius 1.13 meters, from rest to a final linear velocity of 6 m/s in 2 seconds.
To calculate the torque required to swing the rock, we need to use the formula:
Torque = Moment of Inertia x Angular Acceleration
First, we need to find the moment of inertia of the rock. The moment of inertia depends on the mass of the object and how it is distributed around the axis of rotation. Since the rock is a uniform sphere, we can use the formula:
Moment of Inertia = (2/5) x Mass x Radius²
Plugging in the values, we get:
Moment of Inertia = (2/5) x 0.2 kg x (1.13 m)²
Moment of Inertia = 0.135 kgm²
Next, we need to find the angular acceleration of the rock. We can use the formula:
Final Angular Velocity = Initial Angular Velocity + Angular Acceleration x Time
Since the rock starts from rest and reaches a final linear velocity of 6 m/s in 2 seconds, we can convert the linear velocity to angular velocity using the formula:
Angular Velocity = Linear Velocity / Radius
Plugging in the values, we get:
Angular Velocity = 6 m/s / 1.13 m
Angular Velocity = 5.31 rad/s
Since the rock starts from rest, the initial angular velocity is 0. Plugging in the values, we get:
5.31 rad/s = 0 + Angular Acceleration x 2 s
Angular Acceleration = 2.655 rad/s²
Now we can calculate the torque using the formula:
Torque = Moment of Inertia x Angular Acceleration
Plugging in the values, we get:
Torque = 0.135 kgm² x 2.655 rad/s²
Torque = 0.359 Nm
Learn more about acceleration here
https://brainly.com/question/31207303
#SPJ11