A man pushes a lawn mower on a level lawn with a force of 211 N. If 50% of this force is directed forward, how much work is done by the man in pushing the mower 5.7 m?

The gap the boat travels earlier than slowing down is 2.303m/[tex]αe^2[/tex] v0 ln(10)

The equation of movement for the boat is given through:

m dv/dt = -[tex]αe^2v[/tex]

in which m is the mass of the boat, v is the rate of the boat, and α is a steady that relies upon at the residences of the water.

To resolve for the rate of the boat as a feature of time, we are able to separate the variables and combine each facets of the equation:

[tex]m \int\limits v0^v dv / (v*√(1/v)) = -αe^2 ∫ zero^t dt[/tex]

Simplifying the left-hand aspect the usage of the substitution u = 1/v and [tex]du = -dv/v^2[/tex], we get:

[tex]-m ∫ 1/v0^1/v du = -αe^2 t\\-m ln(v/v0) = -αe^2 t\\ln(v/v0) = αe^2 t / m\\v(t) = v0 * e^(-αe^2 t / m)[/tex]

To discover the time at which the boat stops, we are able to set v(t) identical to 0 and resolve for t:

[tex]v(t) = v0 * e^(-αe^2 t / m) = zero\\e^(-αe^2 t / m) = zero\\-αe^2 t / m = -∞\\t = ∞[/tex]

v = zero.1v0 We can resolve for t in this example through putting v(t) = zero.1v0:

[tex]v(t) = v0 * e^(-αe^2 t / m) = zero.1v0\\e^(-αe^2 t / m) = zero.1\\-αe^2 t / m = ln(zero.1)\\t = -m/αe^2 ln(zero.1)[/tex]

Finally, to discover the gap the boat travels earlier than it slows down, we are able to combine the rate equation from v0 to zero.1v0:

∫ [tex]x0^x dt = ∫ zero^t v(t) dt[/tex]

in which x0 is the preliminary function of the boat. Substituting for v(t), we get: ∫[tex]x0^x dx / v(x) = -m/αe^2 ln(zero.1)[/tex]

Using the substitution u = v/v0, we get: ∫ [tex]1^zero.1 du / u = -m/αe^2[/tex]ln(zero.1)

[tex]ln(10) = -m/αe^2 ln(zero.1)\\x - x0 = -m/αe^2 ln(zero.1) * ln(10) / v0\\x - x0 = 2.303m/αe^2 v0 ln(10)[/tex]

Therefore, the gap the boat travels earlier than slowing down is 2.303m/[tex]αe^2[/tex] v0 ln(10). 

To know more about speed visit:

https://brainly.com/question/13162890

#SPJ4

The statement "the moisture content of the air in different locations of the country must be taken into account when selecting air conditioning equipment" is true because moisture affects the performance.

The selection of the conditioning equipment must take into account the differences in humidity between the two locations (different sections of the country). The conventional copper tube-aluminum fin coil transfers heat more slowly than the all-aluminum coil.

The general rule of thumb is that for every 20°F increase in temperature, saturated air's ability to store twice as much moisture increases. The moisture retention capacity of air at 50°F is 0.0077 lb H2O/lb dry air, which is a little over twice as much as that of air at 30°F, which is 0.0035 lb H2O/lb dry air.

You can also learn about humidity from the following question:

https://brainly.com/question/22069910

#SPJ4

Air is used to pressurize water in a tank, and the pressure is then measured. by a multifluid manometer so Consequently, the air pressure in the tank is 129.45KPa.

In the physical sciences, pressure is defined as either the stress at a place within a confined fluid or the perpendicular force per unit area. The weight of the atm is atmospheric pressure, which is approximately 15 pounds per square inch at sea level. Each square meter of the Earth's surface is under pressure from the atmosphere.

atmospheric pressure ([tex]P_{atm[/tex])=85.6kPa

 [tex]P_{atm[/tex]=85600Pa

density of water=[tex]\rho =[/tex]1000 kg/[tex]m^3[/tex]

density of oil([tex]\rho_0[/tex])=850kg/[tex]m^3[/tex]

density of mercury([tex]\rho_{m[/tex])=13600 kg/[tex]m^3[/tex]

height of water column([tex]h_1[/tex])= 0.1m

height of oil column from water level([tex]h_2[/tex])=0.2m

height of mercury column ([tex]h_3[/tex])=0.35m

pressure at point B

[tex]P_B=P_{air} +\:\rho_0gh_1\: +\rho_wgh_2 \: \rightarrow(1)[/tex]

[tex]P_B=P_{atm} +\:\rho_mgh_3\: \rightarrow(2)[/tex]

[tex]P_{air} +\:\rho_0gh_1\: +\rho_wgh_2 \:=P_{atm} +\:\rho_mgh_3\:[/tex]

[tex]P_{air} =\:-\rho_0gh_1\: -\rho_wgh_2 \:+P_{atm} +\:\rho_mgh_3\:\rightarrow(3)[/tex]

[tex]\rho _mgh_3[/tex]=13600x9.8x0.35=46648 Pa

[tex]\rho _0gh_1[/tex] =850x9.8x0.1=833 Pa

[tex]\rho _wgh_2[/tex] =1000x9.8x0.2=1960 Pa

By putting the value in eq.3

[tex]P_{air[/tex]=85600+46648−833−1960 = 129455Pa

therefore pressure of air in the tank is 129.45KPa

Learn more about pressure

brainly.com/question/12497098

#SPJ4

The time taken before S-wave arrives is 3.33 seconds.

The time taken before S wave arrives is calculated by applying the following equation.

Let the time taken for P-wave = t₁

Let the time taken for S-wave = t₂

The time taken for P-wave, t₁ = ( 25,000 m ) / ( 5000 m/s )

t₁ = 5 s

The time taken for S-wave, t₂ = ( 25,000 m ) / ( 3,000 m/s )

t₂ = 8.33 s

The time taken before S-wave arrives = 8.33 s - 5 s = 3.33 s

Learn more about P-wave and S-wave here: https://brainly.com/question/19236280

#SPJ1

The complete question is below:

An earthquake 25 km from a city produces P and

S waves that travel outwards at 5000 and

3000 m/s, respectively. how much time do they have before the S wave arrives?

Answer:

The distance traveled by train in 12 seconds is 66.72 meters.

Explanation:

The acceleration rate given is in meters per second squared, so we need to convert the velocity of the train to meters per second.

20 km/hr = (20 x 1000)/(60 x 60) = 5.56 m/s

Now we can use the formula for displacement with constant acceleration:

d = v₀t + 0.5at²

where

v₀ = initial velocity = 5.56 m/s

t = time = 12 s

a = acceleration = 0.5 m/s²

Substituting the values, we get:

d = 5.56 x 12 + 0.5 x 0.5 x 12²

d = 66.72 m

The charge Q is inside the box for a cubic box of side a, oriented as shown, and contains an unknown charge is [tex]Q = \frac{4Ea^2}{k}[/tex].

To calculate the charge inside the cubic box, we may apply the electric field equation in terms of charge and distance:

[tex]E = \frac{kQ}{r^2}[/tex]

where r is the distance from the place of interest to the charge and k is Coulomb's constant.

The equation may be stated as follows since the electric field at the top surface is E:

[tex]E = \frac{kQ}{a^2}[/tex]

Because the electric field at the bottom surface is 4 E, the equation may be written as:

[tex]4E = \frac{kQ}{(a/2)^2}[/tex]

When we divide the second equation by the first, we get:

[tex]\frac{4E}{E} = \frac{\frac{kQ}{(a/2)^2}}{\frac{kQ}{a^2}}[/tex]

[tex]4 = \frac{(a/2)^2}{a^2}[/tex]

Solving for Q, we have:

[tex]Q = \frac{4Ea^2}{k}[/tex]

The uniform electric field at the top surface may thus be multiplied by the area of one box face, divided by Coulomb's constant, to get the amount of charge within the cubic box.

To learn more about the charge at

https://brainly.com/question/3412043

#SPJ4

The question is -

A cubic box of side a, oriented as shown, contains an unknown charge. The vertically directed electric field has a uniform magnitude of E at the top surface and 2E at the bottom surface. How much charge Q is inside the box?

Answer:

Below

Explanation:

The components form a RIGHT triangle with legs = Horizontal comp and Vertical comp   and hypotenuse =  the force...

    SO you can use the Pythagorean theorem

        Hypotenuse ^2 = leg1^2 + leg2^2

                  140^2         = 75^2 + Horizontal^2

                    Horizontal^2 = 140^2 = 75^2 = 13975

                     Horizontal = 118.2 N

Current is the rate at which charge passes a certain place in the wire.

Thus option D is correct.

What does the term "electric current" mean?

The rate of electron passage in a conductor is known as electric current. The ampere is the electric current's SI unit. Electrons are little particles that are part of a substance's molecular structure. These electrons can be held loosely or securely depending on the situation.

Electric current in a wire, where electrons serve as the charge carriers, is a measurement of the amount of charge that moves through any point of the wire in a given amount of time. Electric charge motion is occasionally reversed in alternating current but not in direct current.

To learn more about Electric current use link below:

https://brainly.com/question/1100341

#SPJ4

Complete question:

Current is defined (mathematically) by the equation I is equal to start fraction delta Q over delta t end fraction (for average current) or I is equal to start fraction dQ over dt end fraction (for instantaneous current, using calculus). Using whichever definition you are comfortable with, when considering current in a wire, this can be stated (conceptually) as which of the following?

A. Current is distance times charge (d times Q) divided by distance times time (d times t).

B. Current is the amount of charge in a wire, divided by the time it takes to fill the wire with charge.

C. Current is the rate at which the total charge within the wire is changing.

D. Current is the rate at which charge passes a certain place in the wire.

Answer:(a) For the first time step, using Δt = 0.1s:

pf = m * vavg

vavg = pf/m

vavg = (<−0.02, −0.01, −0.02> kg · m/s) / 0.011 kg

To find the position at t = 0.1 s, we need to find the average velocity over the time interval, and multiply it by the time interval:

position = initial position + vavg * Δt

position = <−0.2, −0.61, 0> m + vavg * 0.1 s

(b) To find the position at t = 0.05s, repeat the same steps as in (a) but with Δt = 0.05s.

(c) To find the position at t = 0.1s, starting from the position and momentum at t=0.05s, repeat the same steps as in (a) and (b) with the new initial position and momentum value

Explanation:

The kinetic energy is increased by the number of flights of steps that the rider will climb. The correct option is D.

The energy an object has as a result of motion is known as kinetic energy in physics. It is described as the effort required to move a mass-determined body from rest to the stated velocity. The body holds onto the kinetic energy it acquired during its acceleration until its speed changes.

Given that the engineers are testing the waterslide for the theme park.

As we can know that kinetic and potential energy are two energies which are converted from one to another. The potential energy is increased by increasing the height of the slide from the ground level.

If the potential energy is higher than the kinetic energy of the slider will also increase during the downward journey.

So by increasing the number of flights of steps that the rider will climb there will be more kinetic energy in the slide. The correct option is D.

To know more about Kinetic energy follow

https://brainly.com/question/13808546

#SPJ1

If Y is grounded while the balloon is still close to X, which of the following will be true, Protons will flow from the ground to the sphere.so, option (d) is correct.

What is proton ?

In the nucleus of every atom, there is a proton, a subatomic particle. Though going in the opposite direction from the electron, the particle has a positive electrical charge. The mass of an isolated proton, which is almost equal to that of a neutron, is just 1.673 x 1027 kg.

What is electron ?

It is possible for an atom to have an attached or detached electron, a negatively charged subatomic particle (not bound). The electron, along with protons and neutrons, is one of the three main particle types found inside an atom. Atomic nuclei are composed of protons, neutrons, and electrons.

Therefore, If Y is grounded while the balloon is still close to X, which of the following will be true, Protons will flow from the ground to the sphere.so, option (d) is correct.

Learn more about proton from the given link.

https://brainly.com/question/1481324

#SPJ4

Based on the given figure, for a radiating source at rest, the way waves detected by Observer A compared to those detected by Observer B is that Observer A detects the same wavelength and the same frequency.

The Doppler effect, also called Doppler shift refers to an apparent change in frequency of a wave in relation to an observer. The principle is named after the Austrian physicist Christian Doppler, who described the phenomenon in 1842.

In the given case, a radiating source at rest with respect to an observer produces a series of wave crests that propagate outward. The waves spread out evenly in all directions as shown in the figure. The crests are separated by a distance, λ, where λ is the wavelength.

The observer located in the at point A will see the waves coming evenly, one wavelength apart. The observers located anywhere else would see the same thing. Hence, Observer A will detect the same wavelength and frequency as Observer B.

Learn more about Doppler effect:

https://brainly.com/question/13047678

#SPJ4

The volume of an item may be determined simply yet accurately by measuring the displacement of water.

It works by putting the object in a water-filled container and then calculating how much water the object has moved out of the container. The volume of the item may be calculated using the difference in water level before and after it is submerged.

Unfortunately, this approach does not work with floating objects. This is due to the fact that the item does not move the same volume of water as it does while immersed.

Water will be moved by the item, although considerably less water will be moved than by the submerged object.

Learn more about water displacement:

https://brainly.com/question/11663954

#SPJ4

Since the total energy of the body is constant, we can write Epot + Ekin is 725 J

We can express the potential energy of the body as a function of its height, h, relative to some reference point:

Epot = m * g * h

where m is the mass of the body, g is the acceleration due to gravity, and h is the height of the body.

We can express the kinetic energy of the body as a function of its velocity, v:

Ekin = 0.5 * m * v^2

Since the total energy is constant, we can substitute Epot + Ekin = 725 J into the expressions for Epot and Ekin:

m * g * h + 0.5 * m * v^2 = 725 J

For a moment during the falling, both the potential energy and the kinetic energy can have any non-negative value, as long as their sum is equal to 725 J. So, there are infinitely many possible values for the potential energy and the kinetic energy during the falling. For example, one possible set of values could be:

Epot = 500 J

Ekin = 225 J

Another possible set of values could be:

Epot = 700 J

Ekin = 25 J

And so on.

Read more about Energy:

https://brainly.com/question/15826495

#SPJ4

Throwing a baseball while floating alone in space is an astronaut. The astronaut will move in the opposite direction at a slower speed if the ball is moving away at 20 m/s (option B)

Since there is no gravity in space, the ball is not subject to the effects of gravity. When a ball is hurled upward into space, it rises steadily until it collides with an obstruction in its path.

A thrown ball will travel in a straight line and the person tossing the ball will also travel in a straight line in the opposite direction in deep space, which is far enough away from massive objects like stars and planets that gravity may be disregarded.

There is no longer any force exerted on the thing after it is out of your hand (at least in a vacuum). As a result, the object won't accelerate and will continue moving at the same speed as when it first left your hand.

Learn more about gravity in space here: https://brainly.com/question/30260109

#SPJ4

According to the statement, the mass of the ice block is38.1 kg.

The mass of the block of ice can be calculated using the equation F=ma, where F is the applied force, m is the mass of the block, and a is the acceleration.

Assuming the force is constant, the acceleration can be calculated by dividing the distance moved (11.0 m) by the time taken (5.30 s) to get an acceleration of 2.08 m/s². Then the mass of the block can be calculated by dividing the force by the acceleration, giving a mass of 38.1 kg.

A constant horizontal force is a force that is applied in a straight line parallel to the ground and does not change in magnitude or direction. This type of force is typically applied to an object that is already in motion, such as a rolling ball or a sliding box, and keeps it moving in a straight line.

Complete questions:

A dockworker applies a constant horizontal force of 79.0 n to a block of ice on a smooth horizontal floor. the frictional force is negligible. the block starts from rest and moves a distance 11.0 m in a time of 5.30 s. What is the mass of the block of ice?

Learn more about constant horizontal force:

https://brainly.com/question/29462876

#SPJ4

The  following correctly orders the different categories of electromagnetic radiation; Radio, infrared, visible light, ultraviolet, X rays, gamma rays.

Ultraviolet (UV) radiation is a type of electromagnetic radiation emitted from the sun. It is a form of energy that is invisible to the human eye, but it can cause damage to living organisms. UV radiation is divided into three categories: UVA, UVB, and UVC. UVA radiation has the longest wavelength and is the least hazardous form of UV radiation. UVB radiation has a shorter wavelength and is more dangerous. UVC radiation has the shortest wavelength and is the most dangerous form of UV radiation. Exposure to UV radiation can cause sunburns, premature skin aging, and an increased risk of skin cancer.

To learn more about ultraviolet

https://brainly.com/question/1377878

#SPJ4

The temperature change at the two conditions will be at the leading edge will be 20°C and at the end of the board will be 45.64°C.

The movement of heat across the border of the system due to a difference in the temperature between the system and the surroundings.

Board size = 15 cm × 15cm,

Power = 15W,

Temperature of cooled Air: 20°C, and velocity is 5 m/sec.

Firstly, take some value from Standard Air table, at pressure. Suppose That The film Temperature of the is 35°, at this temperature. and pressure.

K = 0.0265 w/m²c (Thermal conductivity)

V = 1.655 × 10⁻⁵ m²/sec (kinematic viscosity)

and Pr = 0.7668 ( pr and t' Number)

According To The Nusselt. Number Equation,

NVx = hxX / k

Here, x = heat transfer from the edge distance which is 0, 30

hx = ∞

So, express the Surface Temperature at the end board by using the equation

Q = hx. Ax (Ts, T∞)

Q/ hx. As = (Ts-T∞)

Ts = Q/hx. As + T∞

Put all the values in this equation, like, P = 15W, T= 20°C, hx = ∞

So,

Ts = 15/∞As + 20

Ts = 20°C

The Temperature of surface at the leading edge = 20°C

At the end of the board. Assume The flow to be turbulent since the electronic components. turbulators.

So,  firstly determine The Reynolds Number equation, and

Rex = Vx/ u

Re = 5 × 0.15/ 1.655 × 10⁻⁵

Re = 45317.22

which is less than 3x 10⁵, so The flow is laminar flow at the surface.

again from The Relation of pr and t' Number, Reynolds. Nusselt number.

NVx = [tex]0.030s (Re)^(0.8)[/tex] [tex](pr)^(1/3)[/tex]

Put all the values in this equation

NVx = 0.0308 × 5308.97 × 0.90005

NVx = 147.1728

So, determine equation the heat transfer coefficient by using Relation.

here, x = 0.15m, consider.

hx = NVxK/ x

hx = 147.1728 × 0.0265/ 0.15

hx = 26.00

Area = 0.0225 m²

Q = hx. As (Ts - T∞)

Put all the values in equation,

Ts - 20 = 25.64

Ts = 45.64°C

Learn more about Heat transfer here:

https://brainly.com/question/13433948

#SPJ9

The work done by gravity will be 0 since the gravitational force is perpendicular to the distance travelled by the body.

What is gravitational force?

Any two bodies will be attracted to one another by the force of gravity. There is an attraction between every thing in the cosmos, but most of the time it is too faint to be noticed due to the extreme distance between the objects. Furthermore, although the influence of gravity is weaker as objects are moved away, its range is infinite.

The gravitational force is a central force that always acts along the line connecting the centers of the two masses and only depends on the distance between the test mass and the source mass.

Only when displacement is in the direction of the force is work accomplished.

When a force is perpendicular to a displacement, no work is done.

To learn more about gravitational force, here

https://brainly.com/question/24783651

#SPJ4

The statement "The definition of boundary layer refers to the region of flow in which both the temperature gradients are significant and frictional effects are important" is true because when a fluid is in direct contact with a solid surface and its temperatures are different, a thermal boundary layer forms.

As long as the temperatures of the solid surface and the fluid are different, a thermal boundary layer forms when a fluid is in direct contact with the solid surface, according to the classical theory of heat transfer. In fluid mechanics, a boundary layer is a thin layer of a moving gas or liquid in contact with a surface, like the inside of a pipe or the wing of an airplane. Shear forces act on the fluid in the boundary layer.

You can also learn about temperatures from the following question:

https://brainly.com/question/11464844

#SPJ4

E=1/2 mv^2

E=1/2 22x(8,2)^2

E=739,64

The frequency of a signal traveling through a window with a thickness of 3 mm is 12270 MHz and the wavelength is 24.33 cm.

The distance between two successive peaks or troughs of a wave is referred to as its wavelength.

The formula f = c /λ, where f is the frequency, c is the speed of light, and λ is the wavelength, relates a wave's frequency to both its wavelength and speed.

When a signal enters glass, its speed slows and its wavelength lengthens because glass has a slower rate of light propagation than air. We require knowledge about the glass's refractive index in order to compute the new wavelength and frequency. The new speed of light in the glass would be c/1.5 assuming that the refractive index of the glass is 1.5.

The new wavelength in the glass is given by= λ' = λ * (c / c') = λ * (c / (c / 1.5)) = λ / 1.5

The formula for the new frequency in the glass is: f' = c / λ' = c / (λ / 1.5) = 1.5 * f

As a result, the frequency of a signal traveling through a window with a thickness of 3 mm would be 1.5 * (8.18 x 109 Hz) = 12.27 x 109 Hz = 12.27 GHz *1000 = 12270 MHz.

The wavelength of the signal would be (λ/1.5) = (36.5 cm) / 1.5 = 24.33 cm as it passes through the 3 mm thick window glass into your room.

To know more about wavelength, visit:

https://brainly.com/question/12924624

#SPJ4

Answer:

So the answer is C: 2 Ω.

Explanation:

The equivalent resistance of a parallel circuit is given by the formula:

1/R_equiv = 1/R1 + 1/R2 + ... + 1/Rn

In this case, there are 5 resistors each with a resistance of 10 ohms, so:

1/R_equiv = 1/10 + 1/10 + 1/10 + 1/10 + 1/10 = 5/10 = 0.5

And the equivalent resistance is:

R_equiv = 1 / 0.5 = 2 ohms

So the answer is C: 2 Ω.

The potential at P is now if twice as much of this charge is uniformly distributed on the surface of a hollow sphere with a radius of 4r and a centre at point A.

Sphere, The collection of points in three dimensions that are all the same distance from the centre (the radius) or the outcome of rotating a circle around one of its diameters.

Because there is no field inside the shell, the potential there is always the same as the potential outside the shell.

They are round, just like the Earth, which is why they are called spheres. The four spheres are the atmosphere, which contains all the gases that surround Earth, the hydrosphere, Which contains all the water on Earth.

Therefore, A sphere's parts and characteristics are comparable to those of a circle.

Learn more about electric potential here:

https://brainly.com/question/12645463

#SPJ4

We choose the point midway between the two plates as the reference point for the electric potential energy to quantify energy stored.

The electric potential energy (PE) is a measure of the energy stored in an electric field. It is defined as the work done by an external agent to move a charged particle from one point in the electric field to another.

In the case of an electron at rest at a point midway between two plates, we can choose this location as the reference point for the electric potential energy. This means that the electric potential energy at this point is zero, and all other points in the electric field can be defined relative to this reference point.

The i and f subscripts indicate quantities evaluated in the initial and final states, respectively. So, (PE)_i indicates the electric potential energy of the electron in the initial state, when it is at rest at the reference point, and (PE)_f indicates the electric potential energy of the electron in the final state, after it has been moved by an external agent.

The electric potential energy can be calculated using the formula PE = qV, where q is the charge of the electron and V is the electric potential difference between the initial and final states. In this case, the electric potential difference between the two plates can be calculated using the equation V = Ed, where E is the electric field strength and d is the distance between the plates.

Learn more about electric potential energy here:

https://brainly.com/question/12645463

#SPJ4

An amusement park ride consists of a large vertical wheel of radius R and a horizontal axis through its center that revolves counterclockwise.

Amusement rides, often known as carnival rides, are machines or installations that move people for entertainment and fun.

Many people mistakenly believe that rides are scarier or more dangerous than they actually are. This can be the result of the design, acrophobia, or knowledge of accidents involving similar rides. Some people enjoy the adrenaline rush that comes with riding amusement attractions since it adds to the experience.

amusement rides such as ferris wheels, Enterprise, and Skydiver are examples of vertical rides that typically move their guests in a vertical plane and around a fixed point.

Learn about amusement park https://brainly.com/question/24089532

#SPJ1

Considering the motion of the two balls:

The projectile's displacement horizontally as a result of velocity is shown by the horizontal velocity component (vx).

The projectile's displacement vertically as a result of velocity is shown by the vertical velocity component (vy).

Learn more about horizontal and vertical velocities at: https://brainly.com/question/20349275

#SPJ1

5. The density here will be 60/150 = 0.4 g/cm³

The force of gravity, often known as gravitation, affects every material thing in the universe. The gravity force tends to draw any two items or particles with nonzero mass toward one another. From subatomic to galaxy clusters, gravity affects things of all sizes.

Gravitation seems to be the force in physics that draws two masses together. Unbelievably, every subatomic particle of matter with in cosmos attracts every other particle through gravity. The phrases attraction and gravity are sometimes used synonymously to refer to the attraction that exists between anything with mass or energy.

6) a. The weight of water causes this pressure .

b. As the weight of water increases the pressure increases too.

7) a. pascal (represented as Pa) can be used to measure pressure.

b. The number of particles increases.

c. The pressure will compress

8) The affect of drag on an object causes friction

To know more about gravitation visit:

brainly.com/question/3009841

#SPJ1

It is better to land with the knees bent while leaping from a substantial height since it prolongs the time it takes to halt, lessens the impact, and causes less pain.

The equation for impulse-momentum:

Δp = F Δt

Where,

Δp = momentum

F = force

t = time

The equation is referred to as the impulse-momentum theorem. The impulse is defined as the average net external force multiplied by the time it takes for that force to act. It is comparable to the shift in momentum. The strength, duration, and length of action of a force all have an impact on how it affects an object. The idea of impulse is useful since it measures the effect of a force. A strong force operating quickly, as the force of a tennis racket striking the ball, can have a considerable impact on an object's momentum.

Learn more about momentum here: https://brainly.com/question/30397428

#SPJ4

To compute [tex]2^3[/tex], the function first calls itself with [tex]n=2,[/tex] which computes[tex]2^2 = 4[/tex]. Then, the function doubles this result to get [tex]2^3 = 8.[/tex]

Here is the pseudo-code for the pow2 function:

function pow2(n):

   if n < 0:

       return -1

   if n == 0:

       return 1

   else:

       prev_power = pow2(n-1)  # Compute 2^(n-1) recursively

       return prev_power * 2   # Double the result to get [tex]2^n[/tex]

The base case for the recursion is when n is 0, in which case the function returns 1 since [tex]2^0 = 1.[/tex]

The function recursively calls itself with smaller values of n until it reaches the base case. The recursive calls build up the power of 2 by doubling the previous power.

To know more about Recursive Function, here

https://brainly.com/question/30027987

#SPJ4