A Man-in-the-Middle attack. A man-in-the-middle (MITM) attack occurs when a perpetrator inserts himself into a dialogue between a user and an application, either to listen in on the conversation or to pose as one of the parties, giving the impression that regular information flow is taking place.
A Man-in-the-Middle , broadly speaking, is comparable to a mailman examining your bank statement, noting your account information, then resealing the envelope and bringing it to your door.
Interception and decryption are the two independent stages of a successful Man-in-the-Middle operation. Interception-Before it reaches its destination, the initial stage involves intercepting user traffic that is traveling across the attacker's network. in Man-in-the-Middle attack.
By distributing free, malicious WiFi hotspots to the general population, an attacker can carry out a passive attack, which is the most typical (and straightforward) method of achieving this. They usually don't have password protection, and their names usually match where they are. When a victim connects to one of these hotspots, the attacker has complete access to any online data transfer.
To know more about Man-in-the-Middle:
brainly.com/question/13014110
#SPJ4
assuming zero transmission time for the html object, how much time elapses from when the client clicks on the link until the client receives the object?
Assuming there is no transmission delay for the HTML object, the following variables will affect how quickly the client receives the object after clicking the link: Processing time for clients, Timing of server processing, Latency in a network Network capacity.
The length of time it takes for a piece of data to go from one location to another through a network is referred to as transmission time. The distance between the two places, the calibre of the network connection, the bandwidth of the connection, and the amount of data being communicated are some of the variables that affect transmission time. Due to the time it takes for the data to traverse the physical network, transmission time grows as the distance between the sites widens. Additionally, the transmission time will increase with the magnitude of the data being communicated. In general, transmission times will be shortened by a quick, dependable network with lots of bandwidth.
Learn more about transmission here:
https://brainly.com/question/10604099
#SPJ4
one type of storage device that is sometimes used with computers for backup purposes and that uses sequential access is a . a. magnetic tape drive b. compact card c. hard drive d. flash drive
A magnetic tape drive is a type of storage device used for backing up data on computers. It uses sequential access and stores data in a continuous strip of magnetic tape.
Option A. Magnetic Tape DriveA magnetic tape drive is a type of storage device used for backing up data on computers. It uses sequential access and stores data by recording the data onto a continuous strip of magnetic tape. This process is slow, but it is also reliable and cost-effective. The tape is divided into sections, and each section can store up to one gigabyte of data. Magnetic tape drives are usually used for long-term storage and archiving of large amounts of data, and they are often used in conjunction with other storage devices such as hard drives.
Learn more about Magnetic Tape Drive: https://brainly.com/question/13014385
#SPJ4
what is the decimal form of the following binary ip address? 11001101.00111001.10101001.01000010
The decimal of the IP address is 205.57.169.66
A device on the internet or a local network can be recognized by its IP address, which is a special address. The rules that determine the format of data sent over the internet or a local network are known as "Internet Protocol," or IP.
IP addresses, which contain location data and make devices reachable for communication, are essentially the identifier that permits information to be sent between devices on a network. The internet needs a way to distinguish between various computers, routers, and websites
To know more about IP address here
https://brainly.com/question/14219853
#SPJ4
what value should be adjusted in a block`s properties to prevent it from appearing in the drawing at a different size?
To prevent a block from appearing at a different size, you need to adjust its "Scale" value in the block's properties to 1 in the block definition, which determines the size at which the block is inserted into the drawing.
To prevent a block from appearing at a different size in a drawing, you need to adjust its "Scale" value in the block's properties. The scale value determines the size at which the block is inserted into the drawing. If the scale value is set to 1, the block will be inserted at its original size. If it is set to a value less than 1, the block will be inserted at a smaller size, and if it is set to a value greater than 1, the block will be inserted at a larger size. To ensure that the block is always inserted at its original size, you should set the scale value to 1.
Additionally, it's important to note that the scale value can also be set for individual insertions of the block, allowing you to insert the same block at different sizes in different locations within the drawing. However, this value can also be overridden in the block definition itself, so if you want to ensure that the block always appears at a consistent size, it is best to adjust the scale value in the block definition and not in the individual insertions.
Learn more about consistent size here:
https://brainly.com/question/29695827
#SPJ4
which aws cloud architecture design principle supports the distribution of workloads across multiple availability zones?
The dominant architecture used to secure network access today large organizations is the screened subnet.
What is network?A network consists of two or more computers that are linked in order to share resources (such as printers and CDs), exchange files, or allow electronic communications. The speed computers on a network of the may be linked through the cables, telephone lines, radio waves, satellites, or to the infrared light beams.
TCP/IP is the dominant networking technology today. It is a five-layer architecture. These layers are, from top to bottom, the application layer, the transport layer (TCP), the network layer (IP), the data-link layer, and the physical layer.
To know more about network click-
https://brainly.com/question/28041042
#SPJ4
hashes of two sets of data should match if and only if the corresponding data also matches. true or false?
True: The hash is used to represent a vast quantity of data as a unique fixed-size value. Hashes of two pieces of data should match if and only if the related data matches as well. Small changes to the data cause significant, unpredictably changing changes in the hash. The SHA384 algorithm has a hash size of 384 bits.
What exactly is hashing?Hashing is the process of converting one value into another based on a specified key or string of characters. This is frequently represented by a shorter, fixed-length value or key that reflects the original string and makes it simpler to discover or use it.
The most common use for hashing is the creation of hash tables. A hash table holds key-value pairs in a list that can be accessed by its index. Because the number of key-value pairs is infinite, the hash function will map the keys to the table size. A hash value is then used to index a specific element.
A hash function creates new values based on a mathematical hashing technique, which is referred to as a hash value or simply a hash. To avoid the conversion of A good hash always employs a one-way hashing method to hash back into the original key.
Data indexing and retrieval, digital signatures, cybersecurity, and cryptography are all applications of hashing.
Learn more about digital signatures from here;
https://brainly.com/question/20463764
#SPJ4
1. Re-read the various examples of computer crimes at the beginning of this chapter. Categorize each as either a crime where the computer was the target of the criminal activity or a crime in which the computer was a tool in accomplishing the criminal activity.
2. A friend of yours has just been hired by an organization as its computer security officer. Your friend is a bit nervous about this new job and has come to you, knowing that you are taking a computer security class, to ask your advice on measures that can be taken that might help prevent an intrusion. What three things can you suggest that are simple but can tremendously help limit the possibility of an attack?
The computer crimes categorized as criminal activity tool or target in accomplishing are The Morris Worm (November 1988) - target
Solar Sunrise (February 1998) - targetThe Melissa Virus (March 1999) - tool The Love Letter Virus (May 2000) - toolThe Code Red Worm (2001) - toolThe Slammer Worm (2003) - target Conficker (2008) - targetIf I had to offer my friend any advice, I would advise him to take the following precautions to prevent intrusion:
To identify a system threat or monitor malicious software, activate an effective anti-malware program.You can be sure that a lot of this program's resources have been changed to keep your system stable.An attack will be stopped by using a web application firewall as the first line of defense.This helps find connections to the device that shouldn't be there.Three things I can recommend my companion that will assist with restricting the chance of an assault:1. Another arrangement is to guarantee sure both the program and working framework refreshes are cutting-edge. It might make spillage or damage the gadget documents by vindictive projects, infections, and worms distinguished as weaknesses.
2. The subsequent methodology is to restrict the frameworks working on the organization and boycott any excess projects that are not in activity.
3. The third methodology is to coordinate and incorporate the least insights about the security dangers to the laborers of the association. Try not to find the subtleties simple to get to in light of the fact that the gatecrasher is after the subtleties.
Learn more about Computer crimes :
brainly.com/question/13109173
#SPJ4
when activities formerly done by people following procedures are moved to computers that perform the work by following instructions in software, the activities are said to be
When activities formerly done by people following procedures are moved to computers that perform the work by following instructions in software, the activities are said to be automated.
What is Automation?
Automation is the use of technology, specifically computers and software, to perform tasks that were previously performed by humans. It involves the creation of systems and processes that can operate independently and without direct human intervention. The main goal of automation is to increase efficiency, reduce errors, and save time. Automation can be applied to a wide range of industries, including manufacturing, finance, healthcare, and many others.
When activities formerly done by people following procedures are moved to computers that perform the work by following instructions in software, the activities are said to be automated.
Automation refers to the process of using technology to perform tasks and operations that were previously done manually by people. This involves the use of software programs and algorithms that follow a set of instructions to perform specific functions. Automation aims to improve efficiency, accuracy, and speed of work processes, and can be applied in various industries such as manufacturing, finance, and healthcare.
Learn more about Automation click here:
https://brainly.com/question/346238
#SPJ4
a malicious user deploys a rogue wireless access point that users unknowingly connect to. user traffic is captured, modified, and sent back out on the network in an attempt to send fraudulent user session data. which type of attack it this?
Replay attacks entail the attacker capturing important packets, maybe altering them, and then transmitting them again over the network.
What kind of attack entails the attacker adding a client-side script to the website?Malicious scripts are injected into websites that are normally safe and reputable in Cross-Site Scripting (XSS) attacks. XSS attacks take place when an online application is used by an attacker to deliver malicious code, typically in the form of a browser side script, to a separate end user.
What three categories of cyberattacks exist?The following are examples of cyberthreats your organization should be aware of: malware. Ransomware. DDoS (distributed denial of service) assaults.
To know more about network visit :-
https://brainly.com/question/1167985
#SPJ4
question 5 a data analyst is sorting data in a spreadsheet. they select a specific collection of cells in order to limit the sorting to just specified cells. which spreadsheet tool are they using? 1 point
Short range is the name of the spreadsheet programme that scientists use to sort their data. After sorting the data in a worksheet, you can reorganize it to quickly find values.
A group of tools and procedures that allow a computer programme to capture, display, and work with data that is organized in rows and columns might be referred to as a spreadsheet tool. A data analyst can choose a specific group of cells to limit the sorting to that range by using the short-range to make sure they can. This spreadsheet application aids data analysts in condensing data in accordance with their needs and work functions. Short range is the name of the spreadsheet programme that scientists use to sort their data. You may, for instance, order the personnel by the department before the last name. Sorting is a technique used to attempt to put data into a meaningful order so that it may be more thoroughly analyses.
Learn more about A spreadsheet tool here:
https://brainly.com/question/29355592
#SPJ4
1.suppose you have a memory system using fixed-size partitions with all partitions the same size, 2^16 bytes and a total main memory size of 2 ^24 bytes. in the process table there is a pointer to a partition for each resident process. how many bits are needed for this pointer?
8 bits are needed for partition pointer in fixed-size partition memory system with [tex]2^{16}[/tex] byte partitions and [tex]2^{24}[/tex] bytes of main memory, as each process in the process table has a pointer to one of [tex]2^{8}[/tex] partitions.
To determine the number of bits needed for the partition pointer, you need to find out how many partitions there are in the main memory. If the main memory size is [tex]2^{24}[/tex] bytes and each partition size is [tex]2^{16}[/tex] bytes, then the number of partitions can be calculated as follows:
[tex]2^{24}[/tex] bytes / [tex]2^{16}[/tex] bytes per partition = [tex]2^{8}[/tex] partitions
Therefore, there are [tex]2^{8}[/tex] partitions in the main memory. To represent a pointer to a partition, we need log2([tex]2^{8}[/tex]) = 8 bits. So, 8 bits are needed for the partition pointer.
This means that each process in the process table has a pointer to one of the 256 partitions in the main memory. The pointer is stored as an 8-bit binary number, which can take on any value from 0 to 255, representing the partition number. When a process is swapped into main memory, its pointer is set to the partition number it is assigned to. When the process is swapped out, its partition is freed and can be reused by another process.
In this memory system, the use of fixed-size partitions with equal sizes and a pointer to a partition in the process table makes it easier to manage the allocation and deallocation of main memory. This method is called the Fixed Partition Memory Allocation technique.
Learn more about Memory Allocation here:
https://brainly.com/question/14365233
#SPJ4
what’s risky about “risky sharing”?
C. your private messages, photos, and videos may be shared.
whose touch is this? understanding the agency trade-off between user-driven touch vs. computer-driven touch
The "touch" referred to in the question is likely the interaction between a user and a device or computer application. The "agency trade-off" refers to the balance between the control and decision-making power of the user versus that of the computer.
What is computer-driven touch?
Computer-driven touch refers to a type of interaction between a user and a computer or device in which the computer takes the lead role in determining the outcome of the interaction. In computer-driven touch, the computer uses pre-programmed rules and algorithms to respond to user inputs and make decisions about how to interact with the user.
The "touch" referred to in the question is likely the interaction between a user and a device or computer application. The "agency trade-off" refers to the balance between the control and decision-making power of the user versus that of the computer.In user-driven touch, the user has more agency or control over the interaction, meaning they make the decisions about what actions to take and how to navigate the interface. User-driven touch is commonly found in traditional touch devices like smartphones and tablets, where the user directly interacts with the screen to control the device.On the other hand, in computer-driven touch, the computer has more agency and control over the interaction. This is often seen in more advanced applications like virtual assistants and smart home systems, where the computer makes decisions about how to respond to user inputs based on pre-programmed rules and algorithms. In these cases, the user may have less control over the interaction, but they also benefit from a more streamlined and efficient experience.The agency trade-off between user-driven touch and computer-driven touch ultimately depends on the specific context and use case. The choice between the two will depend on factors such as the goals of the interaction, the level of user expertise, and the desired level of user control.Learn more about user-driven touchclick here:
https://brainly.com/question/17516705
#SPJ4
What can a programmer expect when writing a modular program for a game, compared to a non-modular one?
A. A more player-friendly game
B. A more organized program
C. A faster-running program
D. A more engaging game
When designing a modular program for a game, a programmer should expect a more player-friendly game than when writing a non-modular one.
What characteristics distinguish modular programming?Multiple programmers can work on the same application together thanks to modular programming. There are various files where the code is kept. The code is brief, clear, and straightforward to comprehend. Due to their localization to a certain subroutine or function, errors are simple to identify.
What does programming modularity mean?A software design technique called modular programming places an emphasis on breaking down a program's functionality into separate, interchangeable modules, each of which has everything needed to carry out only one particular component of the required capability.
To know more about programmer visit:-
https://brainly.com/question/2750731
#SPJ1
Answer: b
Explanation: just took quiz
Why shouldn't an abstract method be declared final?1. There's nothing wrong with doing so2. final abstract methods cannot be overridden and they must be overridden if a concrete class ever is to be instantiated3. So long as the abstract method never actually is used in by any other method, there's no problem with doing this4. So long as the abstract method is declared in a Class (not an Interface), there's nothing wrong with doing this5. None of the above
They can contain a mixture of methods stated with or without an implementation, and you cannot instantiate them. However, you can declare fields abstract that is not static and final as well as construct public, protected, and private concrete methods while using abstract classes.
All fields that you declare or define (as default methods) in an interface are immediately public, static, and final. In addition, you can implement any number of interfaces but you can only extend one class, whether or not it is abstract.
If any of the following apply to your circumstance, think about utilizing abstract classes: You want multiple closely related classes to exchange code. You anticipate that classes that extend your abstract class will have a lot of shared fields or methods, or that they'll need access modifiers other than public (such as protected and private).
You wish to declare fields that aren't final or static. This gives you the ability to specify methods that have access to and control over an object's state.
To know more about classes:
brainly.com/question/28900908
#SPJ4
which area of iaaa tracks the amount of information a user accesses on a network? (5 points) accounting authentication authorization identification
Information accounting is the process of tracking and recording the amount of information accessed on a network for monitoring, billing, and planning purposes.
Information accounting refers to the process of tracking and recording the amount of information that a user accesses on a network. This information may include data about the type of information accessed, the frequency of access, and the volume of data transferred. The main purpose of information accounting is to monitor network usage and ensure that the network resources are being used efficiently and effectively. It can also help administrators to detect unauthorized access, identify potential security risks, and enforce network usage policies. Information accounting can be performed in real-time or periodically, depending on the needs of the network and the organization.
In addition to tracking network usage, information accounting can also be used for billing purposes. For example, in a commercial setting, an organization may charge its customers for the amount of data they use or for access to certain resources. This information can also be used for planning and budgeting, as it provides valuable insights into the utilization of network resources and helps organizations to optimize their network infrastructure.
Learn more about network here:
https://brainly.com/question/28334529
#SPJ4
Graded Assignment
Brochure for a Cause
Total Score: 100 points
Instructions
1. Create a marketing brochure to according to the design specifications outlined by the Golden Paws Animal
Shelter. Consult the Brochure for a Cause Design Checklist for more details about these requirements.
2. Add the citations for the sources you used to complete this project to this document. Only include sources that
are credible and relevant to your submission.
3. Attach any associated project files to turn in along with this document.
4. To submit an online document or product, copy and paste the link in this document.
5. Submit this document with your citations and your project for grading.
Answer.
Insert your citations and/or link here.
As a first step in this scenario, perform scope verification against the baseline. The document will include the bibliography.
In order to acquire official acceptance of the deliverables, verifying scope necessitates evaluating the deliverables with the client to make sure they are completed satisfactorily. Verify scope is similar to a usability or quality control test. Authorized deliverables are the main results of the verify scope phase. The main goal of the Verify Scope method is to confirm that the final deliverables are satisfactory and meet the expectations of stakeholders. The project scope is formally accepted during the Verify Scope phase, which is mostly focused on the results of the work. You can generate an automatic bibliography by selecting the location where you wish to insert a bibliography after you have created all of the sources and added citations to your document (usually at the end of the document).
Learn more about Verify scope here:
https://brainly.com/question/30049936
#SPJ4
alba wants to use a watermark image as the background of her worksheet. she goes to the page setup group on the page layout tab. what option should sh
Alba should choose the "Watermark" option under "Page Background" in the Page Setup group of the Page Layout tab of Microsoft Excel. She can then select to input a photo as a watermark and set it as the worksheet's background image.
A transparent image or pattern known as a watermark is placed over a document or image to prevent illegal use of it. It acts as a visible sign of the legitimacy and ownership of a specific piece of work. The original purpose of a watermark was to identify the paper's manufacturer or to denote the paper's grade. To prevent copyright infringement and to prove who created or owned a piece of digital media, such as photographs, videos, and documents, watermarks are frequently employed nowadays. A document or image can have a watermark added to it using specialised software or online resources. In order to preserve the original content's aesthetic attractiveness, they are typically applied subtly.
Learn more about "Watermark" here:
https://brainly.com/question/26321908
#SPJ4
Analisa pings Kwan in Teams. She requests an example of a financial report that Kwan shares with their client, ClientCo, in their monthly status call. Analisa plans to share a similar report with another client and would prefer a good starting point rather than starting from scratch. Once Kwan confirms sharing is permissible, how should he scrub the report before sending to Analisa
Before giving Analisa the financial report, Kwan should take precautions to safeguard any private or sensitive information that might be present. Scrubbing the report is the term used to describe this practice.
What is financial report?Financial statements are documents that describe a company's operations and financial performance.
Kwan should take security measures to protect any potentially private or sensitive information before giving the financial report to Analisa. This procedure is referred to as "scrubbing the report."
Kwan could take the following actions to clean up the report:
Remove any personally identifying data (PII) about ClientCo's partners, clients, or employees.Remove any financial data that is private to ClientCo or is not pertinent to Analisa's needs.Look over the report for any details that may endanger ClientCo if they were made public.Save the scrubbed report in a safe place and only distribute it to people who have been given permission to see it.Thus, this can be done in the given scenario.
For more details regarding reports, visit:
https://brainly.com/question/14969693
#SPJ1
the active cell in a spreadsheet is the cell into which the user can input data. in most spreadsheet programs the active cell can be identified by which three items?
An electronic document that allows users to alter and do calculations using data that is organized in a grid's rows and columns.
What is an active cell in spreadsheet?
The selected cell in a spreadsheet is referred to as the active cell. It is distinguishable by a large, usually blue, outline that surrounds the cell. A column/row combination is the typical approach to specify where an active cell is located.
The active cell in a spreadsheet is the one that is selected whenever you click on it. You can enter values or a function into a cell once it has been selected. The value of the active cell is often displayed in both the cell itself and a lengthy text field in the spreadsheet toolbar in the majority of spreadsheet systems. The text field is useful for editing lengthy text strings that don't fit in the active cell as well as for examining or changing functions.
To know more about spreadsheet, check the link below:
https://brainly.com/question/26919847
#SPJ4
which term describes the security analysis that attempts to break into systems to test the strength of the system?
The security analysis that tries to break into systems to see how strong they are is known as a penetration test.
What exactly is Linux's running process?The ps command is needed. It offers details about the processes that are currently running, including their process identification numbers (PIDs). The ps command can be used to display information about all currently running processes on both Linux and UNIX. The ps command provides a snapshot of the processes currently running.
What gives it its name, kernel?According to my understanding of the etymology, the word "kernel" is a modernization of the Old English word "cyrnel," which means "seed; If you'll pardon the pun, it also refers to the word from which corn "stems." In that sense, a kernel is something from which the other things grow.
To know more about security analysis visit :-
https://brainly.com/question/4954883
#SPJ4
1. you have 10 different user ids and passwords for different accounts and have a hard time remembering them all. the best thing to do is:
The best thing to do if you have multiple user IDs and passwords for different accounts is to create a unique and strong password for each account.
Use a combination of upper and lower-case letters, numbers, and symbols in order to make it difficult for someone to guess your password. You can also use a password manager like LastPass or Password to help you remember all of your passwords, as these services will securely store all of your passwords in one place. Additionally, consider setting up two-factor authentication for each account to add an extra layer of protection.
Learn more about passwords :
https://brainly.com/question/29836274
#SPJ4
The refine area in the search tab of the ribbon provides quick options for the refining your search including?
The refine area in the search tab of the ribbon provides quick options for refining your search including Advanced Search, filter option, Outlook ribbon, etc.
What is the process of refining your search results?The process of refining your search results describes the methodology through which you can also select a category within the Refine group to further filter your search results:
From, only shows results from a specific person. The subject only shows results based on the subject. Has Attachment – only shows emails that have attachments.
Based on your preference, you can use Advanced Search by clicking the filter button on the right side of the search box. Alternatively, the Outlook ribbon will change to show the Search tab and you use any of the options in the Refine group to refine your search results.
Therefore, the refine area in the search tab of the ribbon provides quick options for refining your search including Advanced Search, filter option, Outlook ribbon, etc.
To learn more about Outlook search, refer to the link:
https://brainly.com/question/24165533
#SPJ1
which design solution states a design must start from the application layer and finish at the physical layer?
In accordance with the top-down design methodology, a design must begin at the application layer and end at the physical layer.
Describe borderless architecture.With the help of the next-generation Borderless Network architecture, users can securely and reliably link anyone, anywhere, with any device, to any resource. For businesses that employ a mobile workforce across the globe, the Cisco Borderless Network Architecture is ideal.
How does a borderless network work?Using cutting-edge virtual private network (VPN) technologies, the Cisco Borderless Networks design authenticates users and devices using the identity-enabled network approach and permits the government workforce to connect securely from any location.
To know more about application layer visit :-
https://brainly.com/question/22883762
#SPJ4
in the conversation program, which input value was converted to another type after being entered by the user?
Age input value was converted to another type after being entered by the user.
An early time-sharing system provided by IBM, the Conversational Programming System (CPS), ran on System/360 mainframes from 1967 to 1972 in a partition of OS/360 Release 17 MFT II or MVT or higher.[2] Users had the option of choosing between a fairly complete version of PL/I or a basic version of BASIC when using the CPS interpreter.
The remote job entry (RJE) features of a third option let users submit JCL job streams for batch processing. Control mode was a fourth choice. Control mode would typically only be accessible to the system operator. The features accessible in control mode included:
Send a message to a specific user or to everyone.
Clobber (what we would now refer to as "re-boot") a particular user's virtual CPS
To know more about conversation program, here
https://brainly.com/question/18691764
#SPJ4
when you connect to the unix server and run a unix command such as ls, where does the code for the ls command run, on your pc, or on the unix server? a. unix server b. pc
The code for a unix command like ls runs on the unix server when you connect to it and issue the command.
How do I use the Unix ls command?The ls command lists all the files' names in a certain Unix directory. The files listed in your current working directory are displayed when you enter the ls command without any parameters or qualifiers. You can use one or more modifiers when issuing the ls command to obtain more details.
Just how do I launch a Unix server?Run the start-ds command to launch the server on UNIX or Linux computers, or start-ds.bat for Windows systems. The server is initially launched as a background process via the start-ds command.
To know more about unix visit :-
https://brainly.com/question/29798419
#SPJ4
use the help button at the bottom of your screen to find the idla technical support phone number. the phone number is:
The phone number to connect technical support is: 1-800-927-8158.
Workers in technical support assist in managing, maintaining, and fixing IT systems. The job also include identifying hardware or software errors and resolving problems over the phone or in person. handling client technical assistance requests sent by phone and email. adding technical advice and brief publications to the firm website.
Professionals in technical support assist in managing, maintaining, and fixing IT systems. The job also include identifying software and hardware issues and finding solutions over the phone or face-to-face.
Learn more about technical support : https://brainly.com/question/27366294
#SPJ4
What is a seach engine
Answer:
A search engine is a software that helps the user find answers to queries on the internet. They display results based on the user's question. Some examples of search engines would be G oogle, Bing, and Yahoo.
pseudocode is so named because it resembles the actual code of computer languages such as c and java. group of answer choices true false
It is True that pseudocode is so named because it resembles the actual code of computer languages such as c and java
Pseudocode is a textual representation of an algorithm or program used to describe a computer program's steps and logic, without actually writing code in a specific programming language. The term "pseudo" means "fake" or "imitation," and the term "code" refers to the programming instructions that a computer can understand and execute.
The idea behind pseudocode is to provide a high-level description of the logic of the program using natural language, mathematical notation, and programming concepts. The purpose of using pseudocode is to help the programmer understand the logic of the program and to serve as a starting point for writing actual code in a programming language.
Pseudocode is designed to look like real code, with a similar structure, syntax, and conventions. This makes it easier for programmers to read and understand and also provides a way to communicate with others about the program.
In conclusion, pseudocode is named so because it resembles the actual code of computer languages, but it is not actual code that a computer can execute.
Learn more about pseudocode here:https://brainly.com/question/24953880
#SPJ4
how to determine whether the greedy algorithm works with a coinage system for the change making problem
The greedy algorithm for the change making problem works if the coinage system satisfies the "greedy choice property."
What is greedy choice property?
The greedy choice property states that the solution to a problem can be obtained by making a locally optimal choice (the greedy choice) at each stage with the hope of finding a global optimum.
To determine if the greedy algorithm will work for a specific coinage system, you need to check if the following conditions hold:
The coin values are sorted in decreasing order.For any two coin values, the larger coin value must not be a multiple of the smaller coin value.If the coinage system satisfies these two conditions, the greedy algorithm will produce an optimal solution for the change making problem.
If either of these conditions is not satisfied, the greedy algorithm may produce a suboptimal solution, and a different algorithm may be needed to solve the problem.
Example:
Consider the coinage system [25, 10, 5, 1]. This system satisfies both conditions, so the greedy algorithm will produce an optimal solution.
To know more about greedy algorithm, visit: https://brainly.com/question/29243391
#SPJ4