A light bounces off the surface of a metal cup and shines in Harold’s eyes. Which best describes what is happening to the light waves in this scenario?

absorption
interference
refraction
reflection

Answer:

I'm thinking Newton's first law of motion.

Explanation:

"An object at rest remains at rest, or if in motion, remains in motion at a constant velocity unless acted on by a net external force."

Answer:

PART A

In a solid

The attractive forces keep the particles together tightly enough so that the particles do not move past each other. ... In the solid the particles vibrate in place. Liquid – In a liquid, particles will flow or glide over one another, but stay toward the bottom of the container.

In a liquid

Particles are quite close together and move with random motion throughout the container. Particles move rapidly in all directions but collide with each other more frequently than in gases due to shorter distances between particles.

A gas

The particles move rapidly in all directions, frequently colliding with each other and the side of the container. With an increase in temperature, the particles gain kinetic energy and move faster.

PART B

The molecules are continually colliding with each other and with the walls of the container. When a molecule collides with the wall, they exert small force on the wall The pressure exerted by the gas is due to the sum of all these collision forces. The more particles that hit the walls, the higher the pressure.

Explanation:

GOOD LUCK!!! :)

Answer:

is the formula is F=MA so

F=100kg×4m/s=400n

so the answer is 400n

Weight = mass × acceleration due to gravity, so

52 N = m (9.8 m/s²)

m = (52 N) / (9.8 m/s²) ≈ 5.3 kg

Answer:

The mass of the object is 40 Kg

Explanation:

Net Force

According to the second Newton's law, the net force exerted by an external agent on an object is:

F = m.a

Where:

a = acceleration of the object.

m = mass of the object.

The mass can be calculated by solving for m:

[tex]\displaystyle m=\frac{F}{a}[/tex]

The object has a net force of F=600 N acting on it and travels at [tex]a=15\ m/s^2[/tex], thus the mas is:

[tex]\displaystyle m=\frac{600}{15}[/tex]

m = 40 Kg

The mass of the object is 40 Kg

Explanation:

[tex]advantage[/tex]

It is Sensitivity to surface defects. ...

[tex]disadvantage[/tex]

There is a major heat loss during cycling eddy currents due to friction in the magnetic circuit, especially where the core is saturated

Please mark as brainliest answer

Answer:

f

Explanation:

The correct options that describe the physical properties of matter are "A substance's resistance to flow," and "A substance's ability to conduct electricity." The correct options are B and C.

Physical properties of matter are characteristics that can be observed or measured without changing the substance's identity. These properties can help us identify and classify different substances.

Here in the Question,

Let's consider each option one by one:

A. A substance's pH is a chemical property of matter, which indicates whether a substance is acidic, neutral, or basic. It depends on the substance's chemical composition and the concentration of hydrogen ions in it. Therefore, this option is not a physical property.

B. A substance's resistance to flow is a physical property, also known as viscosity. It refers to how easily a substance can flow or be poured. For example, honey has a high viscosity, while water has a low viscosity. This property depends on the intermolecular forces between the molecules of the substance, which affect how closely they pack together. Therefore, this option is a physical property.

C. A substance's ability to conduct electricity is a physical property that depends on its structure and the presence of charged particles, such as ions or electrons. Substances that can conduct electricity are called conductors, while those that cannot are called insulators. Metals are good conductors of electricity, while plastics are good insulators. Therefore, this option is also a physical property.

D. Whether a substance rusts is a chemical property that indicates how a substance reacts with other substances, specifically with oxygen. Rusting occurs when iron or steel reacts with oxygen in the presence of water, forming a reddish-brown compound called iron oxide. Therefore, this option is not a physical property.

E. A substance's inability to combine with other substances is also a chemical property that depends on the substance's reactivity. Inability to combine with other substances may be due to a substance's stable electronic configuration, such as noble gases. Therefore, this option is also not a physical property.

Therefore, options B and C are true.

To learn about Redox reaction  click:

brainly.com/question/13293425

#SPJ5

Answer:

The pressure is  [tex]P = 1.31*10^{5} \ Pa[/tex]

Explanation:

From the question we are told that

    The depth of the swimming pool is  [tex]d = 3.00 \ m[/tex]

     The density of water is  [tex]\rho = 1.00*10^{3} \ kg /m^3[/tex]

Generally the  total pressure exerted on the bottom of the swimming pool is mathematically represented as

          [tex]P = P_o + \rho * g * h[/tex]

Here [tex]P_o[/tex] is the atmospheric pressure with value

        [tex]P_o = 101325 \ Pa[/tex]

So

        [tex]P = 101325 + [1000 * 9.8 * 3][/tex]

=>     [tex]P = 130725 \ Pa[/tex]

=>    [tex]P = 1.31*10^{5} \ Pa[/tex]

Answer:

kinetic and potential energy). The opposite is true when you remove thermal energy: Particles move slower (less kinetic energy). Particles get closer together (less potential energy)

Answer:

Explanation:

kinetic and potential energy). The opposite is true when you remove thermal energy: Particles move slower (less kinetic energy). Particles get closer together (less potential energy).

Does this make sense??-

Answer: The plasma membrane is called a selectively permeable membrane as it permits the movement of only certain molecules in and out of the cells. Not all molecules are free to diffuse. If plasma membrane ruptures or breaks down then molecules of some substances will freely move in and out of the cells. Semipermeable membrane describes a membrane that allows some particles to pass through (by size), whereas the selectively permeable membrane "chooses" what passes through (size is not a factor). Selective permeability is a property of cellular membranes that only allows certain molecules to enter or exit the cell. This is important for the cell to maintain its internal order irrespective of the changes to the environment. For example, water, ions, glucose and carbon dioxide may need to be imported or exported from the cell depending on its metabolic activity. Similarly, signaling molecules may need to enter the cell and proteins may need to be released into the extracellular matrix. The presence of a selectively permeable membrane allows the cell to exercise control over the quantum, timing and rate of movement of these molecules.

Explanation: hope this helps you with your work/assingment! Have a wonderful day/night!

Answer:

thermal energy

Explanation:

Answer:

What is quantum physics? Put simply, it's the physics that explains how everything works: the best description we have of the nature of the particles that make up matter and the forces with which they interact. Quantum physics underlies how atoms work, and so why chemistry and biology work as they do.

Answer:

0.373 seconds. First, calculate the initial vertical velocity of the shell. 800sin(30) = 800*0.5 = 400 m/s Now the formula for the distance traveled is d = 400 m/s * T + 0.5A T^2 Substituting known values gives.

Explanation:

Answer:

5000 m³

Explanation:

density = mass / volume

mass = density × volume

mass = 1000 × 5

mass = 5000 ( kg )

Answer:

ineria

Explanation:

It is due to her inertia of motion that kept her moving forward.

We have Nina who is riding skateboard.

We have to determine why Nina fell off the skateboard on rough pavement.

A property of matter by which it continues in its existing state of rest or uniform motion in a straight line, unless that state is changed by an external force.

According to the question -

Before the rough patch, Nina was riding smoothly. However as soon as she enters the rough patch, the rough patch acts as an obstruction to the forward movement of skateboard. The skateboard and Nina are both moving with same velocity. The skateboard is in contact with the rough patch and as soon as the skateboard's motion is obstructed, the skateboard comes to rest but due to the inertia of motion, Nina continues to move with the same forward velocity. In this way, Nina falls ahead of skateboard.

Hence, it is due to her inertia of motion that kept her moving forward.

To solve more questions on Inertia, visit the link below-

https://brainly.com/question/3268780

#SPJ2

Answer:

The kinetic coefficient of friction between box and floor is 0.443.

Explanation:

Let suppose that the box is accelerated uniformly, the acceleration ([tex]a[/tex]), measured in meters per square second, is determined by the following kinematic formula:

[tex]a = \frac{v_{f}-v_{o}}{t}[/tex] (1)

Where:

[tex]v_{o}[/tex], [tex]v_{f}[/tex] - Initial and final speeds of the box, measured in meters per second.

[tex]t[/tex] - Time, measured in seconds.

If we know that [tex]v_{o} = 0\,\frac{m}{s}[/tex], [tex]v_{f} = 2\,\frac{m}{s}[/tex] and [tex]t = 4\,s[/tex], then the acceleration experimented by the box is:

[tex]a = \frac{2\,\frac{m}{s}-0\,\frac{m}{s} }{4\,s}[/tex]

[tex]a = 0.5\,\frac{m}{s^{2}}[/tex]

Based on the body diagram, we proceed to form the equations of equilibrium:

[tex]\Sigma F_{x} = P\cdot \cos \theta -\mu_{k}\cdot N = m\cdot a[/tex] (1)

[tex]\Sigma F_{y} = N - m\cdot g - P\cdot \sin \theta = 0[/tex] (2)

Where:

[tex]P[/tex] - Magnitude of the force exerted on the box, measured in newtons.

[tex]\theta[/tex] - Direction of the force exerted on the box, measured in sexagesimal degrees.

[tex]\mu_{k}[/tex] - Kinetic coefficient of friction between box and floor, dimensionless.

[tex]N[/tex] - Normal force from the floor to the box, measured in newtons.

[tex]m[/tex] - Mass of the block, measured in kilograms.

[tex]g[/tex] - Gravitational acceleration, measured in meters per square second.

Now we proceed to solve the system of equation for the kinetic coefficient of friction between box and floor:

By (1)

[tex]\mu_{k}\cdot N = P\cdot \cos \theta -m\cdot a[/tex]

[tex]\mu_{k} = \frac{P\cdot \cos \theta - m\cdot a}{N}[/tex]

By (2)

[tex]N = m\cdot g +P\cdot \sin \theta[/tex]

And then, we get the resulting expression:

[tex]\mu_{k} = \frac{P\cdot \cos \theta - m\cdot a}{m\cdot g + P\cdot \sin \theta}[/tex] (3)

If we know that [tex]P = 400\,N[/tex], [tex]\theta = 50^{\circ}[/tex], [tex]m = 25\,kg[/tex], [tex]g = 9.807\,\frac{m}{s^{2}}[/tex] and [tex]a = 0.5\,\frac{m}{s^{2}}[/tex], then the kinetic coefficient of friction between box and floor is:

[tex]\mu_{k} = \frac{(400\,N)\cdot \cos 50^{\circ}-(25\,kg)\cdot \left(0.5\,\frac{m}{s^{2}} \right)}{(25\,kg)\cdot \left(9.807\,\frac{m}{s^{2}} \right)+(400\,N)\cdot \sin 50^{\circ}}[/tex]

[tex]\mu_{k} = 0.443[/tex]

The kinetic coefficient of friction between box and floor is 0.443.

The kinetic coefficient of friction between box and floor is 0.443.It is the ratio of friction force and the normal recation force.

It is a type of opposition force acting on the surface of the body that tries to oppose the motion of the body. its unit is Newton (N).

Mathematically it is defined as the product of the coefficient of friction and normal reaction.

The given data in the problem is;

F is the force =400 N

m is the mass of box= 25-kg

u is the velocity starting from rest=0

v is the velocity achieved = 2.0 m/s

t is the time = 4.0 s.

[tex]\rm \mu[/tex] is  the coefficient of kinetic friction between box and floor.

The aceleration is found as;

[tex]\rm a= \frac{v_f-v_u}{t} \\\\ \rm a= \frac{2-0}{4} \\\\ \rm a= 0.5 m/sec^2[/tex]

The normal reaction force is find as;

[tex]N= mg +P sin \theta[/tex]

The cofficient of the kinetic coefficient of friction between box and floor;

[tex]\rm \mu_k = \frac{Pcos \theta - ma }{N } \\\\ \rm \mu_k = \frac{Pcos \theta - ma }{ mg +P sin \theta } \\\\ \rm \mu_k = \frac{400 cos 50^0 - 25 \times 0.5 }{ 25 \times 9.81 +400 \times sin 50^0 } \\\\ \rm \mu_k =0.443[/tex]

Hence he kinetic coefficient of friction between box and floor is 0.443.

To learn more about the friction force refer to the link;

https://brainly.com/question/1714663

Explanation:

The beat is a word used for sound waves. The beat frequency is the difference in frequency of two waves. ... In sound, we hear said beat frequency as the rate at which the loudness of the sound varies whereas we hear the ordinary frequency of the waves as the pitch of the sound.

Explanation:

Beats :--

A wave not only travels in space but it also propagates through time, so if the two waves can produce interference by overlapping in space they should also produce an interference pattern when they overlap in time, this phenomenon is called beats.

Beat Frequency :--

The beat frequency is when two sound waves with different frequencies come across each other, then their amplitude gets added and subtracted alternatively for a given time period. This leads to the growth of the sound to louder and softer.

Answer:

500ms times 2 would be when the ball reaches the max horizontal distance.

Then to find the angle, use the formula of time to reach max height t = u sin theta / g . With t being the max height time 500ms, u being 10m/s

For initial vertical velocity just use u sin theta.

The max horizontal height is "10 meters" and the initial vertical velocity is "4.9 m/s".

Given:

Horizontal velocity,

Time,

At max height,

(a)

→ Time to flight (T) will be:

= [tex]2t[/tex]

= [tex]2\times 0.5[/tex]

= [tex]1 \ second[/tex]

→ Horizontal distance will be:

= [tex]V_x\times T[/tex]

= [tex]10\times 1[/tex]

= [tex]10 \ meters[/tex]

(b)

→ The initial vertical velocity will be:

[tex]V_{yf} = V_y +gt[/tex]

   [tex]0 = V_y - 9.8\times 0.5[/tex]

  [tex]V_y = 4.9 \ m/s[/tex]

Thus the above answers are correct.

Learn more:

https://brainly.com/question/3698280

Answer:

The magnitude will be "353.5 N". A further solution is given below.

Explanation:

The given values is:

F = 500 N

According to the question,

In ΔABC,

⇒ [tex]\angle BCA = (90-30)[/tex]

⇒             [tex]=60^{\circ}[/tex]

then,

⇒ [tex]\angle BAC=(180-45-60)[/tex]

⇒             [tex]=75^{\circ}[/tex]

Now,

The corresponding angle will be:

⇒ [tex]\angle FAC=60^{\circ}[/tex]

⇒ [tex]\angle FAB=70+60[/tex]

⇒             [tex]=135^{\circ}[/tex]

Aspect of F across the AC arm will be:

= [tex]F\times cos(60)[/tex]

On putting the values of F, we get

= [tex]500\times (.5)[/tex]

= [tex]200 \ Newton[/tex]

Component F along the AC (in magnitude) will be:

= [tex]F\times cos(135)[/tex]

= [tex]500\times (-.707)[/tex]

= [tex]-353.5 \ N \[/tex]

Answer:

I think carbon dioxide is a mixuture and Methane is a compound

Explanation:

Answer:

15 cm

Explanation:

Dari pertanyaan yang diberikan di atas, diperoleh data sebagai berikut:

Gaya 1 (F₁) = 225 N

Jarak terpisah 1 (d) = 5 cm

Gaya 2 (F₂) = 25 N

Jarak terpisah 2 (d₂) =?

Kita dapat memperoleh persamaan yang berkaitan dengan gaya dan jarak muatan dua titik dengan menggunakan rumus berikut:

F = Kq₁q₂ / d²

Perbanyak silang

Fd² = Kq₁q₂

Menjaga Kq₁q₂ konstan, kita memiliki:

F₁d₁² = F₂d₂²

Dengan rumus di atas maka diperoleh jarak sebagai berikut:

Gaya 1 (F₁) = 225 N

Jarak terpisah 1 (d) = 5 cm

Gaya 2 (F₂) = 25 N

Jarak terpisah 2 (d₂) =?

F₁d₁² = F₂d₂²

225 × 5² = 25 × d₂²

225 × 25 = 25 × d₂²

5625 = 25 × d₂²

Bagilah kedua sisinya dengan 25

d₂² = 5625/25

d₂² = 225

Hitung akar kuadrat dari kedua sisi

d₂ = √225

d₂ = 15 cm

Oleh karena itu, muatan dua titik harus berjarak 15 cm untuk memiliki gaya tarik 25 N

Answer:

[tex]\theta=\tan^{-1}\dfrac{a}{g}[/tex]

Explanation:

Here we are assuming that the car is moving in a straight line and is traveling on a smooth surface. When the car is moving with acceleration [tex]a[/tex] the bob moves in the opposite direction with the same acceleration. Gravity is acting on the bob so it is experiencing an acceleration of [tex]g[/tex] downwards.

The angle between the acceleration [tex]a[/tex] and the acceleration due to gravity [tex]g[/tex] is

[tex]\theta=\tan^{-1}\dfrac{a}{g}[/tex].

Answer:

B.

Explanation:

Intrusive and extrusive rocks are igneous rocks and marble is metamorphic, by the process of elimination, B would be the correct answer.

Answer:

answer is B

Explanation:

Answer:

constant velocity means that both the speed and direction do not change . An object moving in a circular path with constant speed does not have a constant velocity because the direction of the velocity is constantly changing. This implies that an object moving at a constant speed in a circular path is accelerating

Answer  he would go to court veto bill

Explanation

that how it works