Answer:
c
Multiply 3,000 by 3.8 and divide the result obtained by 12
What does the slang term "the Boards" refer to?
Answer:
It can mean "boardwalk" or a "board of a school."
~Mia Sedillo~
Which of the following regulates food labels? HACCP FSIS FDA EPA
Answer:
FDA
Explanation:
Answer:
FDA
Explanation: it right ;)
A student mixed a small amount of iron filings and sulphur powder in a dish. He could not
affect the separation by simple hand-picking. Which liquid will you suggest to affect the
separation?
(a) Carbon di sulphide
(b) Cold water
(c) Boiling water
(d) Kerosene
Answer:
[tex]\huge \boxed{\mathrm{Carbon \ disulphide}}[/tex]
Explanation:
Carbon disulphide is the liquid that can be used to separate iron fillings and sulphur powder.
When carbon disulphide is poured into the dish, the sulphur powder gets easily dissolved in the carbon disulfide. The iron fillings are left to settle on the bottom of the dish.
The iron fillings can get seperated through filtration. When the mixture of sulphur powder and carbon disulphide gets completely evaporated, the sulphur powder is left over.
Carbon disulfide is a liquid that can be used for the separation of iron fillings and sulfur powder. So the correct option is A.
What are separation techniques?
The substances seen around us most of the time are usually not in their pure form. Basically, they are a mixture of two or more substances.
Mixtures are also found and formed in a lot of different forms. Hence, several types of separation techniques are there that can be used for the separation of the mixture of substances. Separation is needed for the removal of all the unwanted materials and also for obtaining useful components from the mixture.
Following are some common methods that are used for the separation of substances or mixtures. These are Handpicking, winnowing, threshing, sieving, distillation, filtration or sedimentation, magnetic separation, separating funnel, etc.
Therefore, carbon disulfide is used and the correct option is A.
Read more about separation techniques, here
https://brainly.com/question/16824193
#SPJ6
Ceramics resist moisture, do not conduct electricity, and can withstand temperatures higher than molten metals. Propose some uses of ceramics.
Answer:
Ceramics can be used in items where insulation is required or is preferred for the usage of the item. Examples would be bowls, plates, mugs, vases, pots, and other various items.
Explanation:
The reason why ceramics are often used in these items is due to the various properties that ceramics possess. As stated in the question, they are resistant to moisture, don't conduct electricity, and can withstand high temperatures.
Answer:can be used in a place where electric conductivity is not needed and in a place where moisture is not needed.
Explanation:we use ceramics for our bath room mostly because moisture is not needed there
If you walk 6336 feet, how many miles will you have walked?
Answer:
1.2 miles
Explanation:
The statement "If a plant receives
fertilizer, then it will grow to be
bigger than a plant that does not
receive fertilizer" is an example of
A. an observation.
B. a hypothesis.
C. a theory.
Answer:
A hypothesis
Explanation:
A hypothesis is an intelligent guess that is put forward in order to explain an observation. If it is observed that there is a difference in the rate of growth of plants that receives fertilizer and those that do not receive fertilizer, then we can hypothesize that;"If a plant receives fertilizer, then it will grow to be bigger than a plant that does not receive fertilizer". This is must now be subjected to a series of experiments in order to ascertain its validity.
This is the scientific method.
15g is equivalent to how many mg
Answer:
15,000 mg
Explanation:
1 gram=1000 mg
15 gm=15,000 mg
The pressure of 10.0 L of gas increases from 1.50 atm to 1240 mmHg. What is the final volume of the gas, assuming constant temperature?
Answer:
The final volume of gas is 9.19 L.
Explanation:
Given that,
Volume = 10.0 L
Initial pressure = 1.50 atm
Final pressure = 1240 mmHg
We need to calculate the final volume of gas
Using formula of ideal gas
[tex]P_{1}V_{1}=P_{2}V_{2}[/tex]
[tex]V_{2}=\dfrac{P_{1}V_{1}}{P_{2}}[/tex]
Where, P₁ = initial pressure
P₂ = final pressure
V₁ = initial volume
Put the value into the formula
[tex]V_{2}=\dfrac{1.50\times10\times760}{1240}[/tex]
[tex]V_{2}=9.19\ L[/tex]
Hence, The final volume of gas is 9.19 L.
Suppose three different compounds composed of only nitrogen and oxygen were analyzed and the following data were obtained:
Mass of: Samples N O
Compound-A 1.500 g 0.955 g 0.545 g
Compound-B 2.000 g 0.933 g 1.067 g
Compound-C 3.000 g 0.913 g 2.087 g ———————————————————————————
a) Show that this data is consistent with the law of multiple proportions.
(b) If compound-B has the formula NO, what are the formulas of compounds A and C?
Answer:
I think it is b
Explanation:
but I'm not for sure that the answer is right
convert eachh into scientific notation
4.060 x 10^5 →
7 x 10^3 →
5.0 x 10^-4 →
8 x 10^-2 →
Answer:
0.00580 →
3000 →
0.000908 →
200. →
Explanation:
yay
Answer:
[tex]\large \boxed{\mathrm{view \ explanation}}[/tex]
Explanation:
4.060 × 10⁵ (scientific notation)
The decimal point moves 5 places to the right.
⇒ 406000 (standard form)
7 × 10³ (scientific notation)
The decimal point moves 3 units to the right.
⇒ 700 (standard form)
5.0 × 10⁻⁴ (scientific notation)
The decimal point moves 4 units to the left.
⇒ 0.0005 (standard form)
8 × 10⁻² (scientific notation)
The decimal point moves 2 units to the left.
0.08 (standard form)
What is the electron change needed to obtain an gallium octet?
Answer:
According to the octet rule, each atom required to complete eight electrons in the outermost shell of p orbital and s- and p- orbitals in an atom's outermost energy level are filled except some atoms. Gallium is one of the exception that does not follow octet rule.
Gallium is a chemical element having atomic number 31 and the electronic configuration of Gallium is 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p.
The electron change needed to obtain an gallium octet by removing the 4p electron and form Ga+.
who was the 33rd president of the United States?
Answer:
Harry S. Truman
Explanation:
Because he was the 33rd president
Dominick and eva are using the same type of stopwatches to measure the time it takes for a chemical reaction to occur. They can use the same stopwatch to measure the time.
Answer:
They did not repeat their tests multiple times.
Explanation:
It may seem that the question is incomplete. The complete question is as below: Dominic and Eva are using the same type of stopwatches to measure the time it takes for a chemical reaction to occur. They each use the same stopwatch to measure the time. These are their results:
Dominic: 78 seconds
Eva: 81 seconds
Why are their results unreliable and can lead to a pseudoscientific claim?
They did not repeat their tests multiple times.
They used the same type of stopwatch.
They did not change the reactants in their chemical reactions.
Only one person should have collected the data.
Dominic and Eva's results are unreliable and can lead to a pseudoscientific claim because they did not repeat their tests multiple times.
Repeating the test multiple times and finding the average of the measurement will minimize the chance of having error in the measurement and improve the accuracy of the outcome.
Thus, without repeated measurement, the reliability and the validity of the measurement would be in doubt.
please am confused and need help
Answer:
1. C
2. C
3. A
4. C
5. True
6. C
Explanation:
1. C The answer is conduction because the heat was transferred through direct contact.
2. C The answer convection because the heat was transferred through a medium (liquid/gas).
3. A The answer is conduction because the heat was transferred through direct contact.
4. C The answer is radiation because the heat was transferred through thermal emission.
5. True. This is because the air that is warmed rises, causing the cool air to replace it. You can picture it like the scenario in question 2.
6. C
Describing Matter Matter is anything that has______ and takes up space (_________). The _______________ of an object measures the amount of matter or substance the object contains. Volume is the measure of _________________ by the object.
Answer:
Mass; mass; amount of space taken up.
Explanation:
Matter is anything that has mass and takes up space. The mass of an object measures the amount of matter or substance the object contains.
Volume is the measure of the amount of space taken up by the object.
The SI units for mass and volume are kilogram (kg) and cubic meter (m³) respectively.
Generally, matter exists in three (3) distinct phases and these are;
1. Solid: it is the state of matter in which the physical substance has a definite shape and fixed volume but not compressible. Examples of solids are pen, screwdriver, television, car etc.
2. Liquid: it is the state of matter in which the physical substance can be poured and takes the shape of its container. Also, liquids generally have a definite volume. Examples of liquids are urine, water, milk, blood etc.
3. Gas: it is the state of matter in which the physical substance has no definite shape or volume and as a result fills all available space. Also, gases are easily compressible and can flow. Examples of gases are hydrogen, oxygen, argon, nitrogen etc.
Burets are often used to carefully measure the amount of liquid added to a reaction. The long thin buret tube is marked every milliliter and every tenth of a milliliter. Which of the following measurements is correct for a volume of liquid in a buret?
a. 30 ml
b. 32 mL
c. 32.0 mL
d. 32.01 mL
Answer:
c. 32.0 mL
Explanation:
Buret can measure upto one tenth of a mL . That means it can measure upto one decimal point of a mL . Out of given measurement 32.0 mL reads upto one decimal point of mL so this reading seems to be the reading taken of a liquid in a buret.
Which of the following is the best metaphor for an atom? A. A jigsaw puzzle piece B. A lego block C. A box
Answer:
A box
Explanation:
In quantum mechanics, the atom is metaphorically described as a box. In fact, the Schrödinger wave equation is based on the three dimensional box metaphor of the atom.
Thus, a box provides a convenient treatment of the atom as it represents the fundamental components of the problem of atomic structure, hence the answer.
C. A box
According to Erwin Schrödinger:He proposed the quantum mechanical model of the atom, which treats electrons as matter waves.Atoms are extremely small, typically around 100 picometers across. They are so small that accurately predicting their behavior using classical physics—as if they were tennis balls.For example—is not possible due to quantum effects. Every atom is composed of a nucleus and one or more electrons bound to the nucleus.Thus, the correct option is C.
Learn more:
brainly.com/question/6258301
Name the sub atomic particles present inside the nucleus of an atom
Answer:
protons, neutrons and electrons are the sub atomic particles
If the yellow car travels from -70 m to 20 m in 5 seconds, what is its velocity?
Answer:
18 m/s
Explanation:
v = d/t = 90/5=18
Steel is an example of a pure substance because it is made up of two different metals melted together. True False
Answer:
FALSEExplanation:
A pure substance is a element in it's original state. Two metals mixed together are not pure, if they were separated they would be pure. A rock is not pure since it is a mixture of a lot of materials, that formed that rock. Does this help?
Answer:
False
Explanation:
Pure substance has no mixtures
Use the periodic table to determine whether the compound is a molecule or a formula unit
What is the formula unit we are looking at?
This answer is incomplete plz edit it.
THX
If you wanted to heat a liquid that would splatter when it is heated, you would heat it in a
Answer:
This question lacks options but it will be answered based on the fact that laboratory processes including heating are done using glasswares. The answer is:
Conical or Erlenmeyer/Boiling flask
Explanation:
Glasswares are simply laboratory equipments made of glass. They are used in performing the various laboratory processes like mixing, storing chemicals, heating and cooling etc. Glasswares includes flasks e.g volumetric flask, Erlenmeyer flask etc, beaker, test tube, graduated cylinder etc.
Heating a liquid that would splatter or splash in a laboratory requires using a glassware that can prevent spilling of the liquid outside it. A FLASK such as Erlenmeyer or boiling flask is best suited for this purpose because they generally have a conical shaped body with a narrow neck that prevents liquid chemicals from spilling when heated or shaken. Flasks can also be corked with a lid to prevent the liquid from coming out.
What is the role of critical thinking in scientific process
Answer:
Critical thinking initiates the act of hypothesis.
Critital thinking initiates the hypothesis. By thinking you will come across a question you want to answer. In the conculsion crititcal thinking is used again to validate the hypothesis.
What is the atomic number of an atom with 20 protons 18 electrons and 22 neutrons
Answer:
20
Explanation:
The atomic number is just the number of protons in an atom. So if the atom has 20 protons, the atomic number is also 20.
When the vapor pressure is less than the atmospheric pressure, what will occur? A. The liquid will not boil. B. the liquid will freeze. C. The liquid will boil. D. The freezing point will be lowered.
Answer:
A. the liquid will not boil
this question is for science. which options describes the particles of water as liquid water actively boils to become steam?
a. the particles will gain a large amount of kinetic energy.
b. The particles will increase in temperature as they gain thermal energy.
c. the particles will convert kinetic energy into thermal energy.
d. the particles will have the same average kinetic energy
Answer:
The correct option is;
a. The particles will gain a large amount of kinetic energy
Explanation:
As the water temperature reaches 100°C, which is the boiling point for water at atmospheric pressure, the continued heating is then used to break up the strong inter molecular forces between molecules of the water such that the individual molecules are free to move about and due to the high temperature, have gained considerable amount of kinetic energy for the to rise to appreciable height and to also spread.
The heat which converts water into steam is called latent heat as during the boiling phase, the temperature of the water remains constant.
d the particles will have the same average kinetic energy.
Tick the statement which is not correct ( a) When a beam of light is passed through a colloidal solution, the path of light gets illuminated ( b ) when an electric current is passed through a colloidal solution , colloidal particles move towards the oppositely charged electrodes. ( c ) when an electric current is passed through a suspension , particles move towards the oppositely charged electrodes. ( d ) when an electric current is passed through an electrolyte solution , particles move towards the oppositely charged electrodes.
Answer:
option a is not correct
Gerry is looking at salt under a powerful microscope and notices a crystalline structure. What can be known about the salt sample Gerry is looking at?
A. The atoms have spread out from each other.
B. The atoms are sliding past each other.
C. The atoms have no particular pattern.
D. The atoms are vibrating in place.
Answer:
D,the atom are vibrating in place
A small group of a repeating pattern of the atomic structure is defined as the unit cell. It is the building block of the crystal structure. A crystal structure have atoms are vibrating in place. The correct option is D.
What is a crystal structure?The crystal structure is obtained by attaching atoms, groups of atoms or molecules. This structure is formed from the intrinsic nature of the constituent particles to produce symmetric patterns. The ordered arrangement of atoms, ions, molecules form crystal structure.
The oscillation of atoms in a solid about the equilibrium position is defined as the Lattice vibration. It is the equilibrium positions which form a regular lattice because the atoms are bound to neighboring atoms.
Salt is comprised of tiny cubes that are bound together through ionic bonding of sodium and chloride ions.
Thus the correct option is D.
To know more about crystalline structure, visit;
https://brainly.com/question/16592473
#SPJ7
Why is it necessary to research your experiment before starting it?
Answer: by researching the experiment, it helps you make sure you get everything right. If you didn't research it, there's a possibility you can get the experiment wrong.
FeS+O2=Fe2O3+SO2????
FeS+O2=Fe2O3+SO2
Iron (II) sulfide + Oxygen gas
----------------------------------------------------------------------------------------------------------