A imple pendulum ha a period of 3 econd. If the value of ‘g’ i taken a 9. 98 m-2 calculate the length of the pendulum

(A)  in mechanical equilibrium is correct option, as there is no net force acting on it. A non-rotating object that has no acceleration can be said to be in mechanical equilibrium.

Mechanical Balance When all forces acting on an object of interest are equal to zero, mechanical equilibrium has occurred. The balance of all the forces must exist for this to occur.

A reversible reaction is in a stable state called dynamic equilibrium when the rate of the forward reaction equals the rate of the backward reaction. The reaction has come to an end when there is static equilibrium, sometimes referred to as mechanical equilibrium. Or to put it another way, the system is idle.

When an object's acceleration is equal to zero, it is said to be in mechanical equilibrium. The object is either at rest with no change in position over time or it is traveling at a constant pace in this state. The net force acting on the object is equal to zero since the acceleration is zero.

To know more about acceleration visit:

https://brainly.com/question/460763

#SPJ4

In the above situation the net torque on wire 2 due to wire 1 is Zero.

Fleming's left-hand rule identifies the force's direction on a current-carrying wire when it is placed in a magnetic field. It always runs counter to how the magnetic field and electric current are moving.

Torque is a vector quantity by definition. The direction is determined as part of the torque computation. The direction is parallel to both the force and the radius from the axis. It is customary to choose it along the rotational axis in the right-hand rule direction.

a force that is applied that results in a positive counterclockwise torque A negative torque rotates an object in a clockwise direction.

To know more about torque visit:

https://brainly.com/question/20691242

#SPJ4

At the peak  it has the same potential and kinetic energy.

Kinetic energy (K.E.) is inversely proportional to the square of an object's velocity and its mass: K.E. = 1/2 m v2. When a mass is measured in kilograms and a speed is measured in meters per second, the kinetic energy is measured in kilogram-meters squared per second squared.

The velocity will be zero and the ball's displacement will be at its maximum at the highest point of the trajectory. We might state that the energy present is equivalent to the sum of the potential energy.

To know more about kinetic energy visit:-

https://brainly.com/question/15764612

#SPJ4

This problem contains several examples of this.Consider an object sliding on a ramp as depicted here.Downward to the right.

What is the sliding ?

Sliding is a type of motion that involves the movement of an object relative to a surface while keeping contact with it. This type of motion is often used in everyday activities such as walking, running, and skiing. Sliding can also refer to the movement of two or more objects in contact with each other, such as a car door sliding open or a sheet of paper sliding across a table. In physics, sliding is considered to be a type of frictional motion, in which the frictional force between the object and the surface it is sliding on causes the object to move.

To learn more about sliding

https://brainly.com/question/17140804

#SPJ4

Answer:

2.58 m/s

Explanation:

To determine the theoretical speed at which the golf ball must have left the floor, you can use the principle of conservation of energy, which states that the total energy in a closed system remains constant. In this case, we can use the fact that the ball's potential energy changes as it rises and falls.

First, we know that the efficiency of the ball is 61.0%, so we can assume that 39% of the energy is lost as heat, sound, etc. We can calculate the initial kinetic energy (Ei) of the ball as:

Ei = Efficiency * (Initial Potential energy - Final Potential energy)

Ei = 0.61 * (0.444 - 0.271) = 0.119J

Now, we can use this value to calculate the velocity (Vi) of the ball as it left the floor, by using the equation of kinetic energy:

Ei = 0.5 * m * Vi^2

Where:

m = mass of the ball = 0.0453 kg

Vi = velocity of the ball when it left the floor

By substituting the values in the equation we get:

0.119 = 0.5 * 0.0453 * Vi^2

Solving for Vi:

Vi = sqrt(0.119 / (0.5 * 0.0453))

Vi ≈ 2.58 m/s

So, the theoretical speed with which the ball must have left the floor is approximately 2.58 m/s

Keep in mind that this is a theoretical speed and there may be a variance with real-world observations.

Under certain circumstances, the grounded (neutral) conductors of a residential service are permitted to be sized smaller than the phase conductors.

What is conductors?

A material that easily permits the flow of electricity is referred to as an electrical conductor. Conductivity is the quality of conductors that enables them to conduct electricity.

Electric current is the name given to the movement of electrons through a conductor. Voltage is the amount of power necessary to cause that current to flow through the conductor.

What is phase ?

Phases are parts of a system that are mechanically separable from other parts of the system and are physically distinct from other parts of the system. types of substance. Solid, liquid, or gaseous phases can exist in a system. Strong atomic bonding and high viscosity, which produce a hard form in solids, are their distinguishing characteristics.

Therefore, Under certain circumstances, the grounded (neutral) conductors of a residential service are permitted to be sized smaller than the phase conductors.

Learn more about conductors from the given link.

https://brainly.com/question/492289

#SPJ4

A calorimeter is a device which is used to measure and define the internal energy of a system.

A calorimeter is a device used to measure the heat of chemical processes or physical changes, as well as heat capacity. Among the most frequent varieties are differential scanning calorimeters, isothermal micro calorimeters, titration calorimeters, and accelerated rate calorimeters.

A basic calorimeter is just a thermometer attached to a metal container filled with water that is suspended above a combustion chamber. It is a type of measuring instrument used in the study of thermodynamics, chemistry, and biochemistry.

To calculate the enthalpy change per mole of substance A in a reaction involving two compounds A and B, the substances are individually introduced to a calorimeter and the beginning and final temperatures (before and after the reaction) are recorded.

learn more about calorimeter  to visit this link

https://brainly.com/question/4802333

#SPJ4

When two unequal masses are dropped simultaneously from the same height, then both masses will experience the same change in D: velocity.

Velocity is the prime indicator of the position and the rapidity of the object. It can be described as the distance covered by an object in a unit of time. It means that velocity is the displacement of the object in unit time. When in the case where two objects with unequal masses are dropped simultaneously from the same height, both masses will attain the same change in velocity.

You can learn more about Velocity at

https://brainly.com/question/25749514

#SPJ4

Answer:

Static electricity, specifically electrostatic attraction has occurred.

Explanation:

This phenomenon is known as static electricity, which involves the buildup of electric charges on the surface of a material. It can occur when two materials come into contact and then separate, transferring electrons from one material to the other. When you rub the comb against the rabbit fur, you transfer some of the electrons from the fur to the comb, leaving the fur with a positive charge and the comb with a negative charge. This charge separation creates an electric field around the comb and the fur. When you bring the comb and fur near the paper confetti, the negatively charged electrons in the confetti are attracted to the positive charge on the fur and the confetti sticks to the fur. This process is known as electrostatic attraction.

Answer:

To determine the amount of energy released when 110 g of steam condenses, we can use the latent heat of vaporization formula, which states that the energy released is equal to the mass of the steam multiplied by the latent heat of vaporization. The latent heat of vaporization of water is 2256.7 J/g, so the energy released would be equal to 110 g x 2256.7 J/g = 248230 J. This value can be converted to kilojoules by dividing it by 1000, resulting in approximately 248.2 kJ.

It is important to note that the specific heat capacity and the change in temperature are not required to calculate the energy released during the condensation of steam. Instead, we only need the mass of the steam and the latent heat of vaporization. The latent heat of vaporization is a measure of the amount of energy required to change the state of a substance from a vapor to a liquid at a constant temperature, and it is specific to each substance.

Explanation:

A = (v-u)/t, where an is acceleration, v is final speed, u is initial speed, and t is time, is the equation for acceleration. When the values are filled in, we obtain a = (60-20)/5 or an is 8 m/s2.

The equation a = v/t denotes acceleration (a), which is the change in velocity (v) over the change in time (t). This enables you to calculate the change in velocity in meters per second squared (m/s2).

+2 m/s2

If there is no change in velocity between 2 and 3 seconds, the acceleration is 0 m/s2. The acceleration is +2 m/s2 over the first 0 to the second interval. The acceleration is zero between seconds two and three. The acceleration is -3 m/s2 throughout the three to six-second period.

to know more about accelerates here:

brainly.com/question/12550364

#SPJ4

The graph that best illustrates how the intensity of sound varies as a detector is moved further and further from a stationary source projecting sound in all directions would be an inverse square law graph. This graph would show that the intensity of sound decreases as the distance from the source increases. The intensity of sound is inversely proportional to the square of the distance from the source.

This means that if the distance from the source is doubled, the intensity of sound is decreased by a factor of four. This relationship is commonly observed in physics and engineering and is known as the inverse square law of sound propagation. This law states that the intensity of sound decreases as the distance from the source increases in a manner that is inversely proportional to the square of the distance.

Read more about wave propagation:

https://brainly.com/question/9349349

#SPJ4

The velocity of the bike is 2.57 m/s. Then the kinetic energy of the 44 kg mass is 145.3 J.

Kinetic energy of an object is generated by virtue of its motion. Kinetic energy is related to the mass and velocity of the object by the expression written below:

Ke = 1/2 m v²

Given the distance travelled = 1.70 km = 1700 m

time taken = 11 min = 660 s

then velocity = distance/ time = 1700 /660 = 2.57 m/s

Total mass = 44 kg

Ke = 1/2 44 Kg × (2.57)² = 145.3 J

Therefore, the kinetic energy of Shawn and his bike is 145.3 J

Find more on kinetic energy:

https://brainly.com/question/26472013

#SPJ1

The four factors that makeup latency are processing delay caused by processor speed, node queueing delays caused by node load, and transmission delay caused by the bit rate of transmission.

The term "latency" refers to the amount of time that passes between the sender and the recipient of data, or between a particular user action and the resulting answer. A user's internet experience will be significantly impacted by network latency, a serious problem with internet access that can be brought on by a number of factors.

Depending on the application case, there are two forms of latency: one-way transmission and round trip. The transmission of data packets from a source to a destination is referred to as one-way latency.

To know more about latency visit:-

brainly.com/question/29497697

#SPJ4

Caffeine dosage and time to finish a maze are independent variables, meaning that a change in one does not cause a change in the other. It is possible that caffeine dosage may have an effect on the time it takes to finish a maze, but the time it takes to finish a maze would not cause a change in caffeine dosage.

Caffeine is a stimulant that can affect the central nervous system and can have a range of effects on the body, including increased alertness, focus, and energy. When it comes to completing a maze, the time it takes to finish it could be affected by the person's level of alertness, focus, and energy. Therefore, if a person ingests a certain dosage of caffeine, it could affect the time it takes for them to finish the maze because of the effect caffeine has on the body.

On the other hand, the time it takes to finish a maze does not affect the caffeine dosage, in other words, caffeine dosage is an independent variable, it does not depend on other variables, and does not change based on the time it takes to complete a maze. It is determined by the amount of caffeine consumed.

So, in short, caffeine dosage can have an effect on the time it takes to finish a maze, but the time it takes to finish a maze does not have an effect on caffeine dosage.

Learn more about Caffeine Dosage here:

https://brainly.com/question/8554538

#SPJ4

Speed is a scalar quantity that is independent of direction. It is equal to the total distance traveled divided by the total time spent. This means that a plane can normally travel 3952 kilometers in three hours.

Step 1: Make a note of each time the direction changes. Step 2: Determine the distance traveled between each change in direction. Step 3: The total distance traveled is the sum of all the distances from step 2.

As a result, its typical speed is Speed = total distance / total time Speed = 3952 / 3 Speed = 1317.33 km/h.

However, under cloudy conditions, it will travel 184 km less in the same amount of time.

Then, we want to determine the speed under cloudy conditions. Since speed is equal to the total distance divided by the total amount of time, we need to know the total distance under cloudy conditions.

Total distance is equal to the normal distance traveled minus the delay caused by cloudy conditions Total distance. = 3952 - 184 Total distance = 3768 km Total time = 3 hours Speed = 3768 / 3 Speed = 1256 km/hr The plane is traveling at a speed of 1256 km/hr in cloudy conditions. Because it covered less ground in the same amount of time, its speed decreases.

To learn more about total distance here:

https://brainly.com/question/6516113

#SPJ1

The height formed by this 25-foot ladder that leans against a wall is 24 feet.

To find out how far up a wall a ladder will reach, you can use the Pythagorean theorem. The Pythagorean theorem states that in a right triangle, the square of the length of the hypotenuse (the side opposite the right angle) is equal to the sum of the squares of the other two sides. In this case, the ladder forms one side of the triangle, the wall forms another side, and the distance between the base of the ladder and the wall forms the hypotenuse.

Let's call the height of the wall h. Using the Pythagorean theorem, we can set up the following equation:

(25 ft)^2 = h^2 + (7 ft)^2

625 = h^2 + 49

576 = h^2

h = sqrt(576) = 24 ft

Therefore, a 25 ft ladder that is 7 feet from the wall will reach 24 feet up the wall.

Learn more about determining the height of a ladder based on its length and the distance of its base from a wall here: https://brainly.com/question/13734303

#SPJ4

The temperature difference of  1 K on the Kelvin scale is equivalent to the temperature difference of (5/9)°F on the Fahrenheit scale.  Triple-point temperature of water is approximately 491 degrees Rankine.

The unit of scales on the Rankine scale is the same as those on the Fahrenheit scale. Hence, from the freezing point of water (0⁰C) to the boiling point of water(100⁰C) , Rankine scale is divided into 180 scales.

The absolute zero is zero degrees Rankine.  In Celsius scale, absolute zero is −273 °C.

A). A unit scale on the Kelvin scale is the same size as a unit scale in the Celsius scale. Hence,

ΔT 1 K = ΔT 1°C

The ratio of Celsius and Fahrenheit scale is 5/9, therefore:

K/F = C/F = 5/9

Hence,

ΔT 1 K = ΔT (5/9)°F

B) Triple-point temperature of water is approximately 0 °C. Since zero degrees Rankine is equivalent to  −273 °C, hence:

0 °C = 0 - (9/5)(-273) = 491 degrees Rankine.

Learn more about Rankine scale here:

https://brainly.com/question/13294139

#SPJ4

The impulse applied to the soccer ball by the soccer player is the combined force and time of the kick applied to the ball.

What do you mean by Impulse?

Impulse is an instantaneous force applied to an object, resulting in a change in the object's momentum. It is a vector quantity, which means that it has both magnitude and direction. Impulse is the product of a force applied to an object for a certain period of time. It is calculated as the product of the average force applied multiplied by the time period over which the force is applied. For example, when a ball is hit with a bat, the force of the bat is applied to the ball for a certain amount of time, resulting in an impulse which causes the ball to move.

1. Calculate the change in momentum of the soccer ball:

Change in momentum = Final Momentum - Initial Momentum

                                      = 7 kg m/s - 5 kg m/s

                                      = 2 kg m/s

2. Calculate the impulse:

Impulse = Change in Momentum

             = 2 kg m/s

Therefore, the impulse applied by the soccer player to the soccer ball is 2 kg m/s.

To know more about impulse,

https://brainly.com/question/29787329

#SPJ4

Wave amplitude at a specific distance is charged (r). It can be expressed as energy; however Coulomb's law says that it is frequently described as a force.

Charge, also known as electric charge, electrical charge, or electrostatic charge and denoted by the symbol q, is a property of a unit of matter that indicates how many more or fewer electrons than protons it contains.

Protons and electrons are the most prevalent charge carriers for the positive and negative forms of electric charges, respectively. Subatomic particles or matter particles are examples of the different forms of charges: Positive charge characterizes protons. Negative charge characterizes electrons.

Tcosθ=mg \sTsinθ=Fe\stanθ=

mg \sFe

​∵ Fe= \sr \s2

Kq \s2

Fe= \s(2d) \s2

Kq \s2

Fe=4.l2 sin2 Kq2

"tan" equals "4l 2 sin 2 mg Kq 2"

equals (4l 2 sin 2 mg)4 0

​q \s2​

Q 2 equals (4mgl 2 sin 2 tan).

4πϵ \s0

Learn more about charge here-

https://brainly.com/question/30163160

#SPJ4

​

​

You are standing on a moving bus, facing forward. You suddenly fall backward. You can imply from this that the bus's acceleration or speed has increased suddenly.

When the bus accelerates or speeds up suddenly, the inertia of your body causes you to fall backward. Inertia is the tendency of a body to resist changes in its state of motion. It is a basic principle of physics that states that an object in motion will remain in motion with the same speed and the same direction unless acted upon by an outside force. When the bus accelerates suddenly, the inertia of your body causes you to remain in the same position, while the bus moves forward. This results in you falling backward.

To know  more about acceleration  refer to the  link brainly.com/question/2303856

#SPJ4

The angular velocity of a point on the surface of the earth is [tex]7.3 * 10^{-5} rad/s[/tex]

What is angular velocity?

Angular velocity is a vector quantity and is described as the rate of change of angular displacement which specifies the angular speed or rotational speed of an object and the axis about which the object is rotating.

What is angular velocity and write its formula?

Angular velocity is the rate of change of the position angle of an object with respect to time, so w = theta / t, where w = angular velocity, theta = position angle, and t = time.

Every point on the earth's surface completes one circular orbit (centered at a point on the axis) in 1 day

1 day = 24x60x60

1 day=86400s

Angular velocity is given by :

[tex]w =2\pi /86400\\ w =7.3*10^{-5} rad/s[/tex]

Thus, [tex]7.3 * 10^{-5} rad/s[/tex] is the correct answer.

To know more about angular velocity :

https://brainly.com/question/20432894

#SPJ4

Interstitial lung disease is low lung compliance as a result, last of electrical lung tissue destruction.

Interstitial lung disorders brought on by breathing in particles like silicon and asbestos (asbestosis) can cause low lung compliance (silicosis).

Lungs and the pleural cavity have the capacity to expand and contract in response to variations in pressure. Lung compliance, which is a key determinant of lung health and function, is defined as the volume change per unit of pressure change across the lung. Lung compliance varies between inhalation and expiration because measurements of lung volumes vary between the two at the same pressure. Depending on whether only volume and pressure are measured (static) or whether their variations over time are also recorded, lung compliance can be classified as either static or dynamic.

know more about lungs here

https://brainly.com/question/13210870#

#SPJ4

Long ramp would be the net static friction acting on her if the ramp has a total weight of 40 kg is  F = 6.77 N.

The effects (the sum) of any and all pulling and pushing forces that are actually acting on an object is known as the net force. An item will speed up in the net force if the pushing and pulling forces acting on it are not equal (a net force acts).

E(f) - E(i) = -F(k)d

E(f) = mgy(f) = 1/2×mv²(f)

E(i) = mgy(i) + 1/2×mv²(i)

F(k) = [E(f)- E(i)]/-d

= {mgy(s) + 1/2mv²(f) - (mgy(i) + 1/2mv²(i))}/-d

F(k) = {(40)(9.8)(14.2)(sin[tex]20^{o}[/tex]) +0-(0+1/2(40)([tex]10^{2}[/tex])}/-14.2

F(k) = 6.77 N

To know more about static friction visit :

brainly.com/question/13000653

#SPJ4

The numerical value of the vertical velocity of the car at time t=0 is 4.91 meters per second.

Given,

t = 0.25 s

y = 0.75 m

α = 0.95 rad/s²

ω = 6.3 rad/s

Wf=6.54 rad/sec

V=wr

6.54*0.75

V=4.91 m/s

The classic example of independent motions along different axes is projectile motion. Projectile motion is the combination of two separate linear motions. The horizontal motion doesn’t affect the vertical motion, and vice versa. Since there is no acceleration in the horizontal direction (ignoring air resistance), the projectile moves with constant velocity in the x direction.

If an object slides down a friction less plane inclined at angle θ, the acceleration down the plane is g sin θ, because the component of g (the downward acceleration due to gravity) that points along the plane is g sin θ. (There is no acceleration perpendicular to the plane because the normal force from the plane cancels the component of the gravitational force perpendicular to the plane.

Another type of 2-D motion is circular motion. If an object is moving in a circle of radius r with speed v at a given instant, then the (inward) radial component of the acceleration vector a equals. This radially inward acceleration is called the centripetal acceleration. If additionally the object is speeding up or slowing down as it moves around the circle.

To know more about vertical velocity here

https://brainly.com/question/27917951

#SPJ4

The length of the diagonal member is 20 ft, and if its modulus of elasticity is 30,000,000 psi. If the strain in the diagonal member is measured as 0. 001200 in, the elongation of the member is 29 inches.

A truss is constructed of a number of components, such as beams, connected at nodes to create a rigid framework. According to engineering definition, a truss is a structure that "consists of merely two-force members, where the members are placed so that the assembly as a whole behaves as a single entity."

A truss is a piece of furniture comprised of components arranged into linked triangles that function as a single unit. Trusses are most typically used in towers, roofs, and bridges. If a truss' members essentially lie on a single plane, it is referred to as a plane truss.

To learn more about truss visit:

brainly.com/question/16757156

#SPJ4

3 real life examples of people displaying data are, analyzing train schedule, tracking, favorite player stats, analyzing data of workout machines.  

Analyzing different types of data is included in our daily life routine. We can understand it by the following examples:

First is analyzing the train schedule to find out which train is going to our destination, and how much time it will take to reach there, etc. Second one is analyzing the player stats to look how amazing the records have been of your favorite player in last 5 years, against a particular team, etc. Third one is analyzing the data of workout machines, like, how much weight you gained/loose, how much weight you are lifting in the gym, etc.

To know more about schedule, here

https://brainly.com/question/9917659

#SPJ4

The mass of the electrons associated with the neutral atoms must also be taken into account.

Part A

21284Po → 20880Pb + 4He

Part B

E = 13.9 MeV

Part C

23994Pu → 23592U + 4He

Part D

E = 16.2 MeV

For Part A and C, the nuclear equations of the decay process are determined by subtracting the mass number of the products from the mass number of the reactants. The mass number of the reactants is the sum of the mass number of the parent nucleus and 4 for the alpha particle.

For Part B and D, the energy released in the reaction is determined by subtracting the mass of the products from the mass of the reactants and converting to energy using the equation E = mc2. The masses of the reactants and products are found using the atomic masses listed in the periodic table. The mass of the electrons associated with the neutral atoms must also be taken into account.

learn more about electron here

https://brainly.com/question/12535409

#SPJ4

The object accelerates at a constant rate as it moves down the slope because of the constant gravitational force acting on it in a major portion and the rolling tangential force on the object is acting in the smaller form.

Rolling motion of any object occurs when the object starts sliding in a different methods from the other objects such as when the objects starts to roll from the ramp or any other sloppy surface and it rolls down due to the gravitational force and with many other forces such as the rolling tangential force. many forces are acting on the object at the same moment and we are just seeing the gravitational force which is playing a major portion. Hence by this information we can consider that the ball accelerates at a constant rate as it moves down the slope because of the constant gravitational force acting on it in a major portion and the rolling tangential force on the object is acting in the smaller form.

Learn more about Rolling motion:

brainly.com/question/29568301

#SPJ4

Measuring 27ml of liquid using graduated cylinder, it is used to measures the volumes of liquids.

Long, thin vessels called graduated cylinders are used to measure liquid volume. They are not meant to be heated, stirred, or weighed. Graduated cylinders typically come in sizes between 5 and 500 ml. Some of them can even hold volumes greater than one liter.

With your eyes directly level with the liquid, place the graduated cylinder on a flat surface and measure the height of the liquid inside. The liquid will usually slant downward. The term "meniscus" refers to this curve. Read the measurement at the meniscus's bottom at all times.

To know more about graduated cylinder visit:

https://brainly.com/question/13116652

#SPJ1