Which scientist did people think was insane so they dismissed his ideas for almost 2000 years?
Driving automobiles and burning coal for electricity are examples of two human activities that negatively impact _______.
Answer:
I think its pollution?
Homer notices that his shower is covered in a strange green slime. His friend Barney tells him that coconut juice will get rid of the green slime. Homer decides to check this out by spraying half of the shower with coconut juice. He sprays the other half of the shower with water. After 3 days of "treatment" there is no change in the appearance of the green
Answer:
This strange green slime is a colonization of fungi caused by the humidity of the bathrooms, which to be eradicated requires a non-specific antimicrobial such as sodium hypochlorite that generates an osmotic imbalance producing a fungicidal effect.
Explanation:
The fungi that appear in the form of slime at the microscopic level have many forms of colonization, by adding coconut milk it was assumed that this would generate an environment not suitable for their metabolism and reproduction but this did not happen, therefore they continued their reproduction.
Answer:
Explain?
Explanation:
6. A sheet of metal is 2 cm wide, 10 cm tall, and 15 cm long. It was 4 grams. What is the
density?
Answer:
0.013g/cm^3
Explanation:
density= mass÷volume
Answer:
0.01(3) g/cm3 (cm3 means centimeter cubed, (3) means the 3 goes on forever)
Explanation:
The volume of the sheet is 300 cm3, and dividing 4 grams by 300 cm3 gets you 0.01(3) g/cm3. Hope it helps!
in atmosphere water is solute give reason
Answer:
water vapour is there
Explanation:
thats all i know
during a labaratory experiment a sample of aluminum is found to have a mass of 12.50 grams and a volume of 4.6 millititers what is the density of this samplw expressed to thw correct number of significant figures
Answer: download socratic for those type of answer it will give you GREAT ANSWERS !!
Explanation:
With an average acceleration of 0.50 m/s?, how long will it take a cyclist starting from
rest to reach 13.5 m/s?
Answer:
t = 27 s
Explanation:
Given data:
Average acceleration = -0.50 m/s²
Time taken to reach to the 13.5 m/s = ?
Solution:
Formula:
Vf = V₀ + at
Vf = 0
V₀ = 13.5 m/s
a = -0.50 m/s²
Now we will put the values in formula.
0 = 13.5 m/s - 0.50 m/s²t
0.50 m/s²t = 13.5 m/s
t = 13.5 m/s / 0.50 m/s²
t = 27 s
explain the effect of temperature, pressure, volume and concentration reaction rate
When you increase the pressure, the molecules have less space in which they can move. That greater density of molecules increases the number of collisions. When you decrease the pressure, molecules don't hit each other as often and the rate of reaction decreases. Pressure is also related to concentration and volume.
PLEASE MARK ME AS BRAINLIEST
How many moles are in a sample of 2.39 x 10^23 atoms of sodium (Na)
Answer:
The answer is 0.4 molesExplanation:
To find the number of moles in a substance given it's number of entities we use the formula
[tex]n = \frac{N}{L} \\ [/tex]
where n is the number of moles
N is the number of entities
L is the Avogadro's constant which is
6.02 × 10²³ entities
From the question we have
[tex]n = \frac{2.39 \times {10}^{23} }{6.02 \times {10}^{23} } \\ = 0.39700996...[/tex]
We have the final answer as
0.4 molesHope this helps you
If 23,000 joules of energy are used to heat mercury by 4.00 °C, what is the mass of the mercury?
Joy mixed baking soda and vinegar for her volcano model. She saw lots of bubbling and fizzing. What can she infer happened
A chemical change
A change in state liquid to solid
Matter was created
A physical change
Answer:
a chemical change
Explanation:
bubbles formed
Answer:
Explanation:
✔︎A chemical change
✖︎wich is D
would be ur answer
Explanation:
❐A chemical change happens when one chemical substance is transformed into one or more different substances, such as when iron becomes rust. Chemical changes occur through the process of chemical reactions, and the resulting substances have different properties because their atoms and molecules are arranged differently.
CAN I PLZ GET MARK AS THE BRAINLIEST? ")
Write the chemical formula for each binary ionic compound
Number 8 please
A
B
C
D
E
F
Answer:
A. K2S
B. Li2Se
C. ZnO
D. RbBr
E. Cs2S
F. Sr3N2
Explanation:
what chemical is C2H4O2
Answer:
C2H4O2 is Acetic acid.
Explanation:
Acetic acid is a colourless liquid organic compound with the chemical formula CH3COOH (also written as CH3CO2H or C2H4O2). It is in the department of a chemical compound known as Glycolaldehyde. It is the smallest possible molecule that contains both an aldehyde group and a hydroxyl group.
give IUPAC name
CH
|
CH
|
CH3 - CH2 - C = CH-CH2 - CH3
Answer:
The IUPAC name of the given compound is Pent-1-ene.
Explanation:
Longest chain has 5 carbons and the double bond is at C-1 carbon
is CO2 a compound, molecule, or atoms/elements?
Answer:
CO2 is a compound cause there is more then one
Given: (52.6 cm)(1.214 cm)
What is the product expressed to the correct number of significant figures?
1.
64 cm2
2.
63.9 cm2
3.
63.86 cm2
4.
63.8564 cm2
Answer:
2.
63.9 cm2
Explanation:
All non-zero digits are consider significant figures like 1, 2, 3, 4, 5, 6, 7, 8, 9.
Leading zeros are not consider as a significant figures. e.g. 0.06 in this number only one significant figure present which is 6.
Zero between the non zero digits are consider significant like 108 consist of three significant figures.
The zeros at the right side e.g 240000 are also significant. There are six significant figures are present.
When we add or subtract the values the number of significant figures after decimal in result must be equal to the given measurement having less number of decimal places. For example,
The difference between 7.69 and 4.0.
7.69 - 4.0 = 3.7
When we multiply or divide the values the number of significant figures must be equal to the less number of significant figures in given value.
For example in given q:
52.6 cm × 1.214 cm = 63.9 cm²
The number of grams of the solution if you were given 25.00 mL of the ethanol with a
density of 0.79 g/mL
Answer:
The answer is 19.75 gExplanation:
The mass of a substance when given the density and volume can be found by using the formula
mass = Density × volumeFrom the question we have
mass = 25 × 0.79
We have the final answer as
19.75 gHope this helps you
3. Which of the following is used to calculate the average atomic mass of an element?
Se ha añadido un evaporador para una alimentación de 11500 kg/dia de zumo de pomelo de forma que evapore 3000 kg/dia de agua por un lado y se obtenga una disolución concentrado de 50% por el otro ¿ con qué concentración porcentual inicial se deberá alimentar el zumo? (m1 = m2 + m3) (%m1 = %m2 + %m3)
Answer:
37 %.
Explanation:
¡Hola!
En este caso, para el problema descrito, conocemos la corriente de entrada y la de salida del agua, por lo que podemos obtener el flujo de la corriente que contiene el zumo a la salida una vez el agua fue evaporada:
[tex]F_{sol}=11500kg/dia-3000kg/dia=8500 kg/dia[/tex]
Luego, por medio de un balance de zumo de limón en el evaporador en el cual la cantidad que entra es igual a la que sale con sus respectivas concentraciones:
[tex]x_z^{entra}*11500kg/dia=x_z^{sale}*8500kg/dia[/tex]
Como la concentración del zumo a la salida es del 50 % (0.50), la de entrada es:
[tex]x_z^{entra}=\frac{x_z^{sale}*8500kg/dia}{11500kg/dia} =\frac{0.50*8500kg/dia}{11500 kg/dia}\\ \\x_z^{entra}=0.37[/tex]
Que es igual al 37%.
¡Saludos!
How do we balance Zn + HNO3 Zn(NO3)2 + NO + H20
3Zn + 8HNO₃⇒ 3Zn(NO₃)₂ + 2NO + 4H₂O
Further explanationEqualization of chemical reaction equations can be done using variables. Steps in equalizing the reaction equation:
1. gives a coefficient on substances involved in the equation of reaction such as a, b, or c etc. 2. make an equation based on the similarity of the number of atoms where the number of atoms = coefficient × index between reactant and product 3. Select the coefficient of the substance with the most complex chemical formula equal to 1For gas combustion reaction which is a reaction of hydrocarbons with oxygen produces CO₂ and H₂O (water vapor). can use steps:
Balancing C atoms, H and the last O atoms
Reaction
Zn + HNO₃⇒ Zn(NO₃)₂ + NO + H₂O
1. gives a coefficientaZn + bHNO₃⇒ Zn(NO₃)₂ + cNO + dH₂O
2. make an equationZn : left = a, right =1 ⇒a=1
H : left = b, right = 2d⇒ b=2d (eq 1)
N : left = b, right = 2+c⇒b=2+c (eq 2)
O : left = 3b, right = 6+c+d ⇒3b=6+c+d(eq 3)
From eq 1 and eq 33(2d)=6+c+d
6d=6+c+d
5d=6+c (eq 4)
From eq 2 and eq 33(2+c)=6+c+d
6+3c=6+c+d
2c=d (eq 5)
From eq 4 and eq 55(2c)=6+c
10c=6+c
9c=6
c = 2/3
input eq 5
d = 2 x 2/3
d = 4/3
input eq 1
b = 2 x 4/3
b = 8/3
The equation
aZn + bHNO₃⇒ Zn(NO₃)₂ + cNO + dH₂O to
Zn + 8/3HNO₃⇒ Zn(NO₃)₂ + 2/3NO + 4/3H₂O x 3
3Zn + 8HNO₃⇒ 3Zn(NO₃)₂ + 2NO + 4H₂O
can u see water vapour by a microscope?
Answer:
It can be formed either through a process of evaporation or sublimation. Unlike clouds, fog, or mist which are simply suspended particles of liquid water in the air, water vapour itself cannot be seen because it is in gaseous form
Explanation:
hope it help
Answer:
No. Unlike clouds, fog, or mist which are simply suspended particles of liquid water in the air, water vapour itself cannot be seen because it is in gaseous form
Why MgO will form after Mg reacting with CuO? (mcq)
Mg forms positive ions and O forms negative ions
Mg is more reactive than Cu
CuO have loose bonding
Answer:
Mg is more reactive than Cu
Explanation:
In the reaction between Mg and CuO to form MgO, MgO will form because Mg is more reactive than Cu.
This kind of reaction is called a single replacement or single displacement reaction.
The replacement of a metallic ion in solution by a metal atom higher in the activity series than the metal in solution falls into this category of reactions. The element Mg is higher than Cu in the activity series. The higher an element is in the activity series, the more reactive they are. Since Mg is more reactive, it will displace the Cu from CuO.How much energy is required to melt a 500. gram block of iron? The heat of vaporization is 6090 J/g and the heat of fusion is 247 J/g.
3.05x10 6 J
2.47x10 2 J
1.23x10 5 J
6.09x10 3 J
Answer:
Heat required = 1.23×10⁵J
Explanation:
Given:
Mass (m) = 500 gram
Specific heat = 6,090 J/g
heat of fusion = 247 J/g.
Find:
Heat required
Computation:
Heat required = 247 J/g× 500 g
Heat required = 1.23×10⁵J
a boy walking in the street potential or kenetic energy?
Answer:
[tex]\boxed {\tt Kinetic \ energy}[/tex]
Explanation:
First, let's define kinetic energy and potential energy.
Kinetic
energy an object has due to motionPotential
energy an object has stored due to its position, charge, arrangement or other factorsSince the boy is walking down the street, the boy is in motion. Therefore, the energy must be kinetic energy.
what type of energy is a orange being crushed
Answer:
Orange juice
Explanation:
what is a covalent bond? Apex
Answer:
Here is the meaning of covalent bond: covalent bond: a chemical bond in which two atoms share some of their valence electrons which creates a force that holds the atoms together
Hope this helps
Sky
A chemical bond in which two atoms share some of their valence electrons creates a force that holds the atoms together.
What is a covalent bond?A covalent bond consists of the mutual sharing of one or more pairs of electrons between two atoms.
Covalent bonds have high bond dissociation energy as compared to the ionic bond. The overlapping of molecular orbital is bigger in the case of the covalent bonds as compared with ionic bonds.
Hence, covalent bonds are difficult to break and stronger than ionic bonds.
Learn more about covalent bond here:
https://brainly.com/question/12663276
#SPJ2
What does analyzing data involve?
A. Comparing trends or patterns that prove the hypothesis
B. Observing an experiment to collect data
C. Creating a hypothesis to answer a question
D. Forming a hypothesis to develop an experiment
Answer:
A. Comparing trends or patterns that prove the hypothesis
Explanation:
Analyzing data involves comparing trends or patterns that prove the hypothesis. Sometimes, the trend might invalidate the hypothesis.
Data analysis is a very important process in course of experimentation. It brings out the meaning of data and makes data useful. Analysis involves establishing patterns from a given set of data. The main aim of data analysis is to identify useful information. It usually entails cleansing and transforming data into a set that can be useful.
The density of an object is 7.3 g/mL and the volume is 0.94
mL. What is the mass of the object?
Answer:
The answer is 6.86 gExplanation:
The mass of a substance when given the density and volume can be found by using the formula
mass = Density × volumeFrom the question
volume = 0.94 mL
density = 7.3 g/mL
We have
mass = 7.3 × 0.94 = 6.862
We have the final answer as
6.86 gHope this helps you
an atomic mass unit is defined exactly as
Answer:Atomic mass is the mass of an atom in atomic mass units (amu)
Atomic mass
• atomic mass (sometimes called atomic weight) is the mass of the atom in atomic mass units (amu). (from periodic table)
o One atomic mass unit is defined as a mass exactly equal to one-twelfth the mass of one carbon-12 atom. Carbon-12 is the carbon isotope that has six protons and six neutrons. Setting the atomic mass of carbon-12 at 12 amu provides the standard for measuring the atomic mass of the other elements.
o For example, experiments have shown that, on average, a hydrogen atom
3.58 x 1023 molecules of propane C8H8 would occupy how much space at STP
Answer: At STP, a mole of gas takes up 22.4 Liters. The 22.4 Liters/mole quantity can be derived from the Ideal Gas Law, PV = nRT, plugging in STP conditions for P and T, and solving for V/n, which gets 22.4 Liters/mole.
Explanation: