a gas has a pressure of 1.26 atm and accupies a volume of 7.40 l. if the gas is compressed to a volume of 2.93 l, what will its pressure be, asumming constant temprature?

Monosaccharides are the monomers or subunits called that makes up a carbohydrate.

The subunits that make up carbohydrates are known as monosaccharides, also known as simple sugars. Glucose is the most common example of a monosaccharide because glucose molecules can be linked together to form starch, a polysaccharide (or complex carbohydrate).

Basically monosaccharides are a type of monomer or molecular building blocks. However, 'monomer' is also used to refer a wide range of different building block molecules, while 'monosaccharide' only refers to the simple sugars which build complex carbohydrates.

Hence, monosaccharides are the monomers or subunits called that makes up a carbohydrate.

Learn more about monomers from the link given below.

https://brainly.com/question/4856958

#SPJ4

The correct net ionic equation for the reaction between Pb(NO3)2(aq) and NaI(aq) is:

Pb₂+(aq) + 2I-(aq) → PbI₂(s)

In this reaction, Pb₂+ and I- ions combine to form the solid compound PbI₂, while the Na+ and NO3- ions remain in solution as NaNO₃. These spectator ions do not participate in the chemical reaction and can be omitted from the net ionic equation to show only the ionic species that are involved in the reaction.

Therefore, the correct net ionic equation for the reaction between Pb(NO3)2(aq) and NaI(aq) is:

Pb₂+(aq) + 2I-(aq) → PbI₂(s)

learn more about net ionic reaction: https://brainly.com/question/13879496

#SPJ1

The conversion factor to convert any distance of meters into inch is by multiplying the distance in meters by 39.37.

One meter is near about equal to 39.3700787402 inches. Inches and meters both are units to measure the distance. Let's break it down. We know there are 12 inches in a foot and there are about 3.281 feet in a meter and there is 39.37 inches in a meter.

Now, let's see how many feet are in 4 meter. To do that we are going to multiply the number of feet in one meter times four. So, 4 × 3.281, that equals 13.124.

Learn more about distance:

brainly.com/question/26711747

#SPJ4

The specific heat capacity of the unknown metal is 344 J/kg⁰C. And the type of metal that is the unknown sample is silver.

To answer this question, use the following formula:

                myCy ΔT= mₓ. Cₓ.ΔT

Information:

mₓ = Unknown mass of metal

ΔTₓ = temperature of unknown metal

my = Mass of water

Cy = Density of water

ΔTy = temperature of water

Given the values ​​for this question.

mₓ = 0.75 kg

ΔTₓ = (89.4⁰C – 0⁰C) = 89.4⁰C

Tₓ = 89.4⁰C

me = 1.25 kg

Cy = 4200J/kg⁰C

ΔTy = (24.4°C - 20.0°C) = 4.4°C

Then the specific heat capacity of the unknown metal is:

Cy ΔTy = Mₓ. Cₓ.ΔTx

Cₓ = Cy ΔTy/ Mₓ.ΔTx

Cₓ =1.25 x 4200 x 4.4/0.75 x 89.4

Cₓ = 23100/67.05

Cₓ = 344 J/kg⁰C

The specific heat of an unknown metal is silver.

Learn more about the specific heat capacity at https://brainly.com/question/28825214.

#SPJ1

When the salt is dissolved in water, the melting point of ice is lowered by the presence of salt in the water and encourages it to melt.  it separates into Na+ and Cl- ions.

These ions disintegrate the hydrogen bonds holding together the water molecules that give ice its solid structure. The ice melts and transforms into liquid water when the ions break the hydrogen bonds, which lowers the energy of the water molecules. The ice will melt at a lower temperature than it would without the salt because the freezing point of water is lower when ions are present. The salt also causes the ice's surface tension to break down and lowers the energy required for the molecules to move, both of which promote melting. Consequently, the melting point of ice is lowered by the presence of salt in the water and encourages it to melt.

To learn more about melting point

brainly.com/question/29578567

#SPJ4

When magnesium loses electrons to become an ion, it forms a cation. Option B is correct.

Magnesium is a chemical element having symbol Mg and its atomic number will be 12. It is a shiny gray metal having a low density, low melting point as well as high chemical reactivity

Magnesium loses electrons to become an ion, it forms a cation which is a positively charged ion. The formation of a cation occurs when an atom loses one or more electrons, resulting in an overall positive charge.

In the case of magnesium, it would lose two electrons to become a positively charged magnesium ion, written as Mg²⁺. This process occurs because the electron configuration of the magnesium atom becomes unstable when it loses electrons, resulting in an ion with a positive charge.

To know more about cation here

https://brainly.com/question/28710898

#SPJ4

diphosphorus pentoxide results if 3.25 moles of phosphorus are combined with sufficient oxygen is 13 moles of P4O10.

The reaction of phosphorus with oxygen to form diphosphorus pentoxide (P4O10) can be represented by the following equation:

P4 + 10 O2 -> 4 P4O10

From the equation, it is clear that for every mole of phosphorus, 10 moles of oxygen are needed to form diphosphorus pentoxide. Hence, if 3.25 moles of phosphorus are combined with sufficient oxygen to complete the reaction, a total of 32.5 moles of oxygen will be required:

3.25 moles of P4 * 10 moles of O2/1 mole of P4 = 32.5 moles of O2

Since the reaction produces 4 moles of diphosphorus pentoxide for every mole of phosphorus, the amount of diphosphorus pentoxide that will result from the reaction of 3.25 moles of phosphorus is:

3.25 moles of P4 * 4 moles of P4O10/1 mole of P4 = 13 moles of P4O10.

Learn more about pentoxide here:

https://brainly.com/question/14534375

#SPJ4

The molecular formula of the compound is C₄H₈.

Let in  compound number of moles of C and H be x and y respectively.

Number of moles of CO₂ = mass of CO₂ / molar mass CO₂

= 3.14/44

= 0.0714

Number of moles of H₂O = mass of H₂O / molar mass H₂O

= 1.28/18

= 0.0711

Since 1 mol of CO₂ has 1 mol of C.

Number of moles of C in CO₂ = 0.0714

so, x = 0.0714

Since 1 mol of H₂O has 2 mol of H

Number of moles of H = 2 × 0.0711 = 0.1422

Dividing by smallest number to get simplest whole number ratio:

For, C: 0.0714/0.0714 = 1

For, H: 0.1422/0.0714 = 2

So empirical formula is: CH₂

Option 1 and option 4 has empirical formula of CH₂

molar mass of C₃H₆ = 3 × 12 + 1 × 6 = 42 g/mol

molar mass of C₄H₈ = 4 × 12 + 1 × 8 = 56 g/mol

So, the molecular formula is C₄H₈.

Hence, option 4 is correct.

Learn more about molecular formula from the link given below.

https://brainly.com/question/28647690

#SPJ4

From 6.55 moles of Na₂SO₄ there is a mass of NaOH is 524 grams.

The balanced equation is.

CaSO₄ + 2NaOH --> Na₂SO₄ + Ca(OH)₂

From the balanced equation above,

1 mole of Na₂SO₄ will give 2 moles of NaOH.

because of that,

6.55 mol Na₂SO₄ will result from = 6.55 × 2 = 13.1 mol NaOH.

Then the mass of NaOH is:

Moles of NaOH = 5 moles

Molar mass of NaOH = 40 g/mol

So:

Moles = mass/molar mass

Mass of NaOH = 13.1 × molar mass

Mass of NaOH = 13.1 × 40

The mass of NaOH = 524 grams

So, the mass of NaOH is 524 grams.

Learn more about converting moles to mass at https://brainly.com/question/30458481.

#SPJ1

There are two types of ionization energy bands that can be seen when removing one electron from potassium.

These are adiabatic ionization energy (AIE) and vertical ionization energy (VIE). The AIE is the energy required to remove an electron from the highest occupied molecular orbital (HOMO) and the VIE is the energy required to remove an electron from the lowest unoccupied molecular orbital (LUMO).

In general, the AIE is greater than the VIE, but both energies can vary depending on the environment of the atom.

Adiabatic ionization energy (AIE) is the minimum energy required to remove an electron from an atom or molecule in its ground state. In other words, it is the energy required to completely ionize an atom or molecule.

AIE is typically measured in electron volts (eV). AIE is an important concept in theoretical chemistry, as it can be used to calculate the energy of molecules or atoms in their ground state. In addition, AIE can be used to compare the energy of different molecules and atoms, which can lead to an understanding of their relative stabilities and reactivities.

Learn more about ionization energy :

https://brainly.com/question/20658080

#SPJ4

Answer:

i think so

Explanation:

yes

A chemical catalyst increases the rate of a reaction by decreasing the energy of activation.

In a chemical reaction, the presence of a catalyst increases the reaction rate in both forward and backward  reactions by providing an alternative pathway by lowering the activation energy.

Catalysts increase the rate of a reaction without being used up. With the presence of a catalyst in a certain reaction, more number of collisions take place,  so the rate of reaction increases.

When the activation energy is lowered, more reactants can cross the reaction barrier easily and so, the rate of reaction increases.

Therefore, we can say that the role of a catalyst is to lower the activation energy in order to increase the reaction rate.

To know more about catalyst here

https://brainly.com/question/20166168

#SPJ4

We can determine element whether they can exist alone or not by knowing the number of atom it contains.

Definition of Monatomic Gases -

Monatomic is a compound word made up of the letters "mono" and "atomic," which stand for a single atom. This phrase refers to the gases as monatomic gases and is used in both physics and chemistry.

Examples of Monatomic Gases -

Helium

Radon

Neon

Xenon

Definition of diatomic element-

Only two atoms make up diatomic molecules, which are those molecules. A diatomic molecule is referred to as homonuclear if it is made of only one element, and as heteronuclear if it is made of two separate elements.

Examples of diatomic molecules are -

Hydrogen H2

Nitrogen N2

Fluorine F2

Oxygen O2

Definition of Triatomic molecules -

These gases are composed of triatomic molecules, or molecules with a three-atom atomicity.

Examples of triatomic molecules -

Ozone(O3)

Water(H2O)

To know more about elements -

https://brainly.com/question/27968226?referrer=searchResults

Answer:

In order to effectively combat hunger and save the environment, it is essential to develop a comprehensive plan that promotes sustainable agricultural practices and the efficient use of resources. This plan should include initiatives such as increasing access to education and technology, promoting sustainable farming, and incentivizing the use of renewable energy sources.

First and foremost, it is essential to ensure that all people have access to the resources and knowledge necessary to properly grow and consume food. Access to education and technology can help farmers better understand the needs of their soil and climate, allowing them to maximize their yield and quality of produce. Additionally, access to information about agricultural techniques can help farmers become more self-sufficient and reduce their reliance on chemical fertilizers and pesticides.

Second, we must promote sustainable farming practices. This includes reducing the use of chemical fertilizers, pesticides, and herbicides, as well as encouraging the use of organic farming techniques such as crop rotation and intercropping. Sustainable farming practices can help to preserve soil quality and reduce water contamination. Furthermore, these practices can help to promote biodiversity, which is essential for a healthy environment.

Finally, it is essential to incentivize the use of renewable energy sources. By transitioning away from fossil fuels, we can reduce the amount of greenhouse gas emissions released into the atmosphere. Additionally, using renewable energy sources such as solar and wind power can help to reduce energy costs, making food more affordable for those living in poverty.

The pH of the buffer after 0.10 mol of HCl is added is 4.76, and the pH of the buffer after 0.120 mol of NaOH is added is 11.24.

A buffer solution is a mixture of

That helps maintain a relatively constant pH upon the addition of small amounts of an acid or a base. The pH of a buffer solution can be calculated using the Henderson-Hasselbalch equation:

pH = pKa + log([A-]/[HA]) where,

In this case, the buffer solution is composed of acetic acid (CH3COOH) and sodium acetate (CH3COONa). The initial pH of the buffer can be calculated as follows:

pH = pKa + log([Na+]/[CH3COOH])

= 4.75

After 0.10 mol of HCl is added, the concentration of H+ ions increases, causing the pH to decrease. The new concentration of H+ ions can be calculated using the equation:

[H+] = [H+]_initial + (Kw/[A-]) x 0.10 where,

After 0.120 mol of NaOH is added, the concentration of OH- ions increases, causing the pH to increase. The new concentration of OH- ions can be calculated using the equation:

[OH-] = [OH-]_initial + 0.120/volume

Substituting the values in the equation for the pH of a strong base (pH = -log[OH-]) gives a pH of 11.24.

Learn more about the Henderson-Hasselbalch equation here:

https://brainly.com/question/13423434

#SPJ4

The total pressure of the wet gas mixture is [tex]78.5 kPa.[/tex]

Water vapour is another component of the wet gas mixture, but it is not taken into account in the formula above because it has no impact on the overall pressure. When liquid water is heated to the point of evaporation, it turns into the gas known as water vapour. Its partial pressure is influenced by the temperature and relative humidity of the atmosphere and is mostly made up of hydrogen and oxygen. Because of this, the total pressure of the wet gas combination is calculated without taking into account water vapour.This is calculated by adding the partial pressures of nitrogen (53.0 kPa) and helium (25.5 kPa). Mathematically, this is represented as

[tex]Ptotal = Pnitrogen + Phelium \\\\ = 53.0 + 25.5\\\\ = 78.5 kPa.[/tex]

Therefore,The total pressure of the wet gas mixture is [tex]78.5 kPa.[/tex]

learn more anout wet gas Refer:brainly.com/question/14356335

#SPJ4

The heat energy needed to change the temperature of 0.93 kg  of the sample from a temperature of -1.1  to 12.2 °C is 30 KJ. Then the specific heat capacity of the sample is 2.4 KJ/ °C kg

Calorimetry is an analytical  technique used to determine the heat energy absorbed or released by  a system. The calorimetric equation relating the heat energy q with the mass of the substance m, specific heat c and temperature difference ΔT is given as:

q = m c ΔT.

Given that the mass of the sample = 0.93 kg

temperature difference   ΔT = 12.2 - (-1.1 °C ) = 13.3  °C

The heat energy absorbed by the sample is calculated as follows:

30 kJ = 0.93 kg  × c × 13.3°C

Then c = 30 kJ/ (13.3°C × 0.93 kg) = 2.4 kJ/°C kg

Therefore, specific heat of the sample is 2.4 kJ/°C kg.

Find more on calorimetry :

brainly.com/question/11477213

#SPJ1

Explanation:

respecting the law of conservation of energy

also energy loss is equal to energy gain

so applying this to thermal energy the environment losses heat while the bottles get hot

The number of moles present in 643 g of beryllium oxide is 25.71 mol.

Generally, mole is defined as the amount of a substance that contains the same number of elementary particles ( which includes ions, molecules, or atoms) as the number of atoms present in carbon is called the mole.

Mathematically,

Number of moles = Given mass / Molar mass

Here,

Given mass of BeO = 643 g

Molar mass of BeO = 25.01158 g/mol

Number of moles = 643 / 25.01158 = 25.71 mol

Hence, the number of moles present in 643 g of beryllium oxide is 25.71 mol.

Learn more about moles from the link given below.

https://brainly.com/question/29353591

#SPJ4

The molality of a solution is defined as the moles of the solute (in this case Ba(OH)2) per 1000g of the solvent (in this case water).

Solute is a substance that is dissolved in a solvent, such as a liquid. When a solute is added to a solvent, the solute molecules disperse and move freely among the molecules of the solvent. This creates a homogeneous mixture in which the solute is evenly distributed throughout the solvent. Solutes are usually found in solutions, which are composed of a solvent and one or more solutes. Common examples of solutes include salt, sugar, and other minerals.

We can calculate the moles of Ba(OH)2 in the solution using the molar mass of Ba(OH)2 (171 g/mole)

Moles Ba(OH)2 = (Density)(Volume)(Molar Mass)

             = (1.26 g/ml)(5.50m)(171 g/mole)

             = 1090.2 g

Now we can calculate the molality of the solution:

Molality = (Moles Ba(OH)2)/(1000g water)

        = (1090.2 g)/(1000g)

        = 1.0902 m

To learn more about solute
https://brainly.com/question/23946616
#SPJ4

Although the cell wall of plants prevents the entire cell from shrinking, the 10% NaCl solution causes the cell membrane to contract.

Cells can burst or undergo lysis when placed in a solution that has a higher or lower solute concentration than the cell's cytoplasm. This occurs due to a process called osmosis, which is the movement of water molecules across a selectively permeable membrane from an area of high water concentration to an area of lower water concentration.

If a cell is placed in a hypotonic solution, which has a lower solute concentration than the cytoplasm of the cell, water molecules move from the solution into the cell. This causes the cell to swell and can result in the cell bursting or undergoing lysis.

Learn more about hypotonic solution:https://brainly.com/question/29309024

#SPJ1

Formic acid has a pka of 3.75; acetic acid has a pka of 4.76 (a) Formic acid is the stronger acid.(b)  the formic acid have a greater tendency to lose its proton than acetic acid; it wants to give away its protons  

Formic acid (also known as methanoic acid) is a colorless, pungent liquid with the chemical formula HCOOH. It is the simplest carboxylic acid, consisting of a carboxyl group (-COOH) and a hydrogen atom attached to a carbon atom. Formic acid is found naturally in some insects and plants, and is also produced synthetically for various industrial applications.

Formic acid is a strong acid and is used in a variety of industries.

Learn more about formic acid here:

https://brainly.com/question/13016575

#SPJ4

The same gas is present in two identical bottles when both are heated to the same temperature.  pressure if bottle b has twice the volume and contains half as many moles of gas. A perfect gas gets hotter.

When a substance is in the gaseous, or vaporous, state of matter, it is said to be a gas. When referring to something that possesses a gaseous substance's characteristics, the word "gas" can also refer to the condition itself. Along with liquid, solid, and plasma, there are four different natural states of matter.

Gas doesn't have a set volume or shape. The gas fills the space where it is contained with the atoms or molecules that make it up. Even in the presence of gravity, the gas expands until it is evenly dispersed across the container. A gas disperses into space if it is not contained by a container.

The matter's atoms or molecules are constantly in motion when it is in the gaseous form.

Learn more about gas here:

https://brainly.com/question/3637358

#SPJ4

A compound, is a substance composed of identical molecules composed of atoms of two or more chemical elements. Therefore, a combination of chemical substances is called a compound.

In chemistry, a compound is a substance in which two or more different chemical elements are combined in fixed proportions. When elements combine, they react with each other to form chemical bonds that are difficult to break. These bonds are formed by electron sharing or exchange between atoms. Compounds are sometimes confused with mixtures, but they are quite different. Therefore, a combination of chemicals is called a compound. Water, a compound of hydrogen and oxygen in the ratio of two hydrogen atoms to each oxygen atom, contains H2O molecules. Sodium chloride is a compound formed by combining sodium (Na) and chlorine (Cl) in a 1:1 ratio. Although the formula for sodium chloride is NaCl, the compound does not contain actual NaCl molecules.

For more information about compound, visit :

https://brainly.com/question/26487468

#SPJ4

There is a 34.0% LiCl solution and it is present in 250.0 g of solution, then the mass of water is 165.0 g.

A solvent is a substance that dissolves other substances. The solute is the substance that is dissolved in the solvent. Generally, the amount of solvent will be more than the solute

34.0% (m/m) of LiCl

This means that 34.0 g of LiCl is present in 100.0 g of solution.

Mass of water in solution = 100.0 g – 34.0 g = 66.0 g

We need to find the mass of water present in 250.0 g of solution.

So, in 100 g of solution, the mass of water present is 66 g. Then 250 g of solution, the mass of water is:

Massa of water = 66/100 x 250

Massa of water = 165.0 g

Then, the mass of water present in 250 g of the solution is 165.0 g.

Learn more about the mass of solute at https://brainly.com/question/28395798.

#SPJ4

At various temperatures, catalase functions in different ways. The catalase enzyme becomes more active as the temperature rises from 0°C to about 30°C. Up to 100°C, catalase activity declines as the temperature rises.

How much cold can cells endure?

Cells can be stored for centuries at temperatures as low as -196 degrees C. The difficult part is figuring out how they can endure being cooled to such degrees and then being brought back to their normal physiological state. Whether they freeze intracellularly is a key consideration.

In general, a reaction is sped up by increasing temperature and slowed down by decreasing temperature. But extremely high temperatures can denature an enzyme, causing it to lose its form and cease functioning. Every enzyme has a preferred pH range. Temperatures near body temperature (37.5°C) are ideal for catalase enzyme activity and it performs poorly at temperatures of 30°C or lower or 45°C or higher.

To learn more about enzymes use link below:

https://brainly.com/question/14577353

#SPJ1

The volume of the hydrogen gas will increase as the temperature decreases to 200 K, so the answer is likely to be greater than 3.0 L.

The volume of the hydrogen gas in the container can be found using the Ideal Gas Law, PV = nRT.

At 300 K, the pressure (P) and number of moles of gas (n) are constant, so the volume (V) and temperature (T) are related by the equation:

V1/T1 = V2/T2

Where V1 is the original volume, T1 is the original temperature, V2 is the new volume, and T2 is the new temperature.

Solving for V2, we get:

V2 = V1 * T2/T1 = 3.0 L * 200 K / 300 K = 2.0 L.

So the volume of the hydrogen gas at 200 K will be 2.0 L.

A 3.0 L container holds a sample of hydrogen gas at 300 K.

The temperature decreases to 200 K and the pressure remains constant.

Learn more about hydrogen here:

https://brainly.com/question/28937951

#SPJ4

The amount of heat needed to completely vaporize a 1.5 mol sample of liquid chloroform at 60°C ,A total heat of 714.7 kJ needed to vaporize the sample of chloroform.

it can be calculated using the equation Q = m × ΔHvap. In this equation, m is the mass of the sample, and the specific enthalpy of vaporization (ΔHvap) is the amount of energy needed to vaporize 1 mole of the substance. For liquid chloroform, the molar mass is 119.38 g/mol and the enthalpy of vaporization is 37.6 kJ/mol. Plugging these values into the equation gives us a total heat of 714.7 kJ needed to vaporize the sample of chloroform. This means that 714.7 kJ of heat energy must be supplied to the sample in order to completely vaporize the liquid chloroform.

To learn more about chloroform

brainly.com/question/13334667

#SPJ4

The new volume of air is 0.25 L.

Temperature is the degree of hotness or coldness of an object.

The relationship between pressure, volume, and temperature of an ideal gas can be described by the Ideal Gas Law:

PV = nRT

where

Since the temperature does not change, we can assume that T is constant, so the relationship between P and V can be described by:

P1V1 = P2V2

where P1 and V1 are the initial pressure and volume, and P2 and V2 are the final pressure and volume.

So, we can substitute the given values and solve for the new volume:

100 kPa * 0.75 L = 300 kPa * V2

V2 = 0.75 L * (100 kPa / 300 kPa) = 0.25 L

Therefore, The new volume of air is 0.25 L.

Learn more about temperature here: brainly.com/question/24746268

#SPJ1

Answer:

The ionic character of a compound can be used to determine the bond polarity, and the gas phase dipole moment can be used to calculate the bond length. The equation for the bond length (r) in terms of the bond polarity (p) and the bond dipole moment (μ) is given by:

r = (μ) / (4πpε_0p)

Where ε_0 is the vacuum permittivity and p is the bond polarity.

For AgCl, the bond polarity can be calculated from the ionic character:

p = 78.1%

So, substituting the values into the equation, we get:

r = (11.5 D) / (4π * 0.781 * 8.854 x 10^-12 C^2/Nm^2) = 2.8 x 10^-10 m

So the distance between the Ag and Cl atoms in gaseous AgCl is approximately 2.8 x 10^-10 meters.

Explanation: