A force of 180 N to the right and a force of 180 N to the left.

The protein concentration is higher than that of interstitial fluid. The intracellular fluid (ICF) is the fluid inside cells, and is composed of water, electrolytes, and organic molecules.

The intracellular fluid (ICF) is the fluid inside cells, and is composed of water, electrolytes, and organic molecules. Common properties of ICF include high concentrations of potassium ions and low concentrations of chloride ions compared to interstitial fluid. The protein concentration of ICF is lower than that of interstitial fluid.

The protein concentration is higher than that of interstitial fluid.

learn more about fluid here

https://brainly.com/question/28445909

#SPJ4

The transition causing the absorption line at the longest wavelength is the transition from -2 to +2.

Ground State: -2

Number of Excited States: 4

Number of Lines in the Absorption Line Spectrum: 8

Transition Causing Absorption Line at Shortest Wavelength: -3 to -2

Transition Causing Absorption Line at Longest Wavelength: -2 to +2

The ground state is the state at the bottom of the diagram, which is -2.

There are 4 excited states, which are -3, -2, +1, and +2.

There are 8 lines in the absorption line spectrum, which are the 4 transitions from the ground state to the excited states, and the 4 transitions from the excited states back to the ground state.

The transition causing the absorption line at the shortest wavelength is the transition from -3 to -2.

The transition causing the absorption line at the longest wavelength is the transition from -2 to +2.

learn more about absorption here

https://brainly.com/question/24228588

#SPJ4

When mixing and storing materials, volumetric flasks are utilized to determine volumes.

A volumetric flask is a piece of plastic or glass lab equipment used to make solutions. It is applied to prepare a solution with a specific volume. Compared to beakers or Erlenmeyer flasks, volumetric flasks can be used to measure volumes significantly more precisely.

When it's important to know the volume of the mixture being made exactly and properly, a volumetric flask is utilized. Similar to volumetric pipets, the size of a volumetric flask varies according to the solution volume that is being made.

To know more about volumetric flask visit :

https://brainly.com/question/15494897

#SPJ1

Answer:

152.12

Explanation:

hope it helps

Kong Mali po sorry

4 liters of 30% acid must be added to 2 liters of 15% acid to result in a mixture that is 25% acid.

To find the amount of 30% acid that must be added to 2 liters of 15% acid to result in a mixture that is 25% acid, we can use the concept of percentage concentration. The percentage concentration is defined as the ratio of the number of moles of solute (in this case acid) to the total number of moles of the solution.

Let's call x the number of liters of 30% acid to be added. Then the final volume of the solution is (2+x) liters.We know that the final concentration of the solution is 25%, so we can write the following equation:

(moles of acid in 2 liters of 15%) + (moles of acid in x liters of 30%) / (2+x) = 0.25

We can now use the percentage concentration to find the number of moles of acid in each volume of acid:

moles of acid in 2 liters of 15% = (2L * 0.15) = 0.3 moles

moles of acid in x liters of 30% = (xL * 0.30) = 0.30x molesWe can now substitute these values in the equation above:

(0.3) + (0.30x) / (2+x) = 0.25

Solving for x we can find the volume of 30% acid that needs to be added to the 2 liters of 15% acid:

0.3 + 0.30x = 0.25(2+x)

0.3 + 0.30x = 0.5 + 0.25x

0.05x = 0.2

x = 4 L. Therefore, 4 liters of 30% acid must be added to 2 liters of 15% acid to result in a mixture that is 25% acid.

learn more about acid here:

https://brainly.com/question/29796621

#SPJ4

The density of chlorine will be  3.163 g/L.

The mass of a substance per unit of volume is its density. According to Graham's law, a gas's rate of effusion is inversely proportional to its square root density. When a material's particles are concentrated in a low area, they tend to travel to the place where the concentration is highest. When we use perfume or a scented spray in one area of the room and subsequently can smell it throughout the entire space, that is a simple illustration of this process.

rate1 = H2 = 5.93

rate2 = Cl2 = 1

The molecular weight of H2 = 2.016

The molecular weight of Cl2 = x.

By Graham's Law:

5.93 / 1 = x / 2.016

35.1649 = x / 2.016

x = 70.89 g/mol

Determine gas density by volume

70.89 g / 22.414 L = 3.163 g/L

Learn more about Density

brainly.com/question/28929608

#SPJ4

[Ar]4s23d6 the electron configuration of the metal ion in Fe(NO3)3.

The noble gas krypton, which is isoelectronic with As arsenic 3 ion (As3), is isoelectronic with [Ar]3d104s2sp6 because it has gained three electrons.

Transition-metal ions are frequently referred to as having dn configurations because their valence electrons are mostly found in d orbitals. For instance, it is claimed that the Co3+ and Fe2+ ions have a d6 configuration.

The number of protons in the atomic nuclei of arsenic, abbreviated As, is 33. 33 electrons would likewise be present in a neutral As atom.

learn more about electron configuration

https://brainly.com/question/26084288

#SPJ4

Fe which is Iron is the element that distinguishes between fission and fusion processes in terms of binding energy per nucleon.

Since the negatively charged electrons are held in place by the electrostatic pull of the positively charged nucleus, the electron binding energy is the lowest energy needed to remove an electron from an atom. Fe element distinguishes between fission and fusion processes in terms of binding energy per nucleon. In particle physics, the term "binding energy" describes the energy an atom receives from electromagnetic interaction as well as the quantity of energy needed to break an atom down into free nucleons.

Learn more about Binding Energy

brainly.com/question/15718710

#SPJ4

Answer:

correct answer is 0.165 moles by calculation

The theoretical yield of water in this reaction is 1 mole (18.015 grams) of water.

Theoretical yield is the amount of a product one would expect to yield from a reaction if it proceeds to completion, according to a balanced chemical equation. It is calculated by multiplying the limiting reactant by the molar ratio between the reactants and the products. The actual yield of a reaction is usually lower than the theoretical yield, due to a number of factors such as incomplete conversion of reactants to products, product losses, and impurities in the reactants. Theoretical yield is used to calculate the percentage yield of a reaction, which is the ratio of the actual yield to the theoretical yield multiplied by 100.

To learn more about theoretical yield
https://brainly.com/question/30068550
#SPJ4

Answer:

360.g water

Explanation:

Answer:

it is option no B using mole concept

Answer:

The correct answer is 77.0 g.

Answer:

Explanation:

A proton has a relative mass of 1. A neutron has a relative mass of 1. An electron has a relative mass of 1/1840. (accept 0)

An atom of phosphorus, which has a proton mass number of 31 has 15 protons, 15 electrons, and 16 neutrons.

Atom- The fundamental units of matter are atoms. They have a single nucleus, which is surrounded by a small number of protons and electrons.

Element- A species of atom known as an element is one that cannot decompose further. They only contain one kind of atom with the same quantity of protons.

Role of Neutron-

Neutron's charge is neutral. The element's mass is made up of protons and neutrons.

The neutrons' main function in an atom's nucleus is to contribute to the nuclear glue or binding energy that binds the nucleus itself together. Remember that protons and neutrons make up an atomic nucleus.

Positively charged protons don't get along with one another.

Neutrons are added to the structure to make up for the so-called mass deficit in order to counteract the protons' attractive forces.

In order to keep the nucleus together, the nucleons—the protons and neutrons in a nucleus—lose a little bit of mass that is transformed into binding energy.

Proton has  relative mass of 1 while   neutron has  relative mass of 1. While that of an electron has  relative mass of 1/1840.In phosphorous there are 15 electrons , protons and 16 neutrons.Atoms of same type combine to form element.Neutrons contribute to mass of atom hence change in number will make atom unstable.

An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.

The protons are positively charged and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged and hence the atom as a whole is neutral and stable due to presence of oppositely charged particles.

Learn more about atom,here:

https://brainly.com/question/13654549

#SPJ1

Answer is option C) Have low melting points.

Explanation:

As is common knowledge, small molecules make up molecular compounds, and these small molecules are held together by an intermolecular force. The intermolecular tensions in this situation are incredibly weak and simple to overcome when breaking it. Therefore, molecular compounds have low melting and boiling points because of weak intermolecular interactions.

Chemical substances known as molecular compounds assume the shape of distinct molecules. Examples include common substances like carbon dioxide and water. These substances differ significantly from ionic substances like sodium chloride. When metal atoms give up one or more of their electrons to nonmetal atoms, ionic compounds are created. The resultant cations and anions are drawn to one another electrostatically.

To learn more about molecular compounds visit;

https://brainly.com/question/23088724

#SPJ4

Answer:

2H2 +O2 - 2H20

4g of H react to give 36g of H20

20g of H gives Xg of H20

cross multiply

4x= 36*20

4x= 720

Xg = 720/4

Xg= 180g approximately

That is A which is 179

By treating 54.0 grams of aluminum with a solution of zinc chloride, ZnCl, 328.6g/mol of zinc metal will be created.

The molar mass of a substance is its mass expressed in grams per mole. As shown in this video, the molar mass of a substance can be calculated by adding the molar masses of the substance's component atoms. The number of moles in the substance can then be calculated from its molar mass and converted to mass.

Balance chemical reaction,

2Al + 3ZnCl₂ → 2AlCl₃ +3Zn

Molar mass of aluminum is 27.99g/mol

Molar mass of zinc chloride is 136.29g/mol

The mole ratio of ZnCl₂ to Al is 3:2

Grams →  moles  → moles → grams

45Al × 1mol Al/27.99g Al × 3 mol ZnCl₂/2 mol Al × 136.29 g ZnCl₂/1 mol ZnCl₂

on simplification,

45×3×136.29/27.99×2 = 328.6g/mol.

To know more about molar mass visit:

https://brainly.com/question/12127540

#SPJ4

In the chemical equation,Cl₂ (g) + K+ Br− → K+ Cl− + Br₂ (g) bromine looses an electron in the reaction.

Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.

The first chemical equation was put forth by Jean Beguin in 1615.By making use of chemical equations the direction of reaction ,state of reactants and products can be stated. In the chemical equations even the temperature to be maintained and catalyst can be mentioned.

Learn more about chemical equation,here:

https://brainly.com/question/28294176

#SPJ1

Give a succinct description of how the various alkene reactants were combined to create the same result. The most stable intermediate carbocation will arise as a result of an electrophilic proton addition in the reaction between HCl and both alkenes.

The observed product is produced in both cases by adding Cl- to the tertiary carbocation that is produced. By figuring out the physical properties of the reactants and products, negative entropy in chemical processes may also be calculated. Gas molecules are widely spaced apart and move randomly in all directions, which results in high entropy in gases. Being a liquid converting into a solid, water freezing into ice is an entropy-reducing process. Due to the molecules' reduced freedom of movement, a solid has less chaos. A negative entropy reaction occurs when hydrogen and oxygen combine to generate water.

To learn more about carbocation please click on below link

https://brainly.com/question/13164680

#SPJ4

The nuclear product of radioactive decay is called the daughter nuclide.

True

Radioactivity is a phenomenon in which particles such as alpha, beta and gamma rays are emitted from unstable atomic nuclei. This is due to the fact that the nucleus is unstable and requires a rearrangement of its protons and neutrons. Radioactive isotopes can be found in nature, or they can be artificially created. Radioactivity has many useful applications, such as medical imaging, cancer treatments, smoke detectors, and nuclear energy. It also has some potential dangers, such as radiation exposure and the risk of nuclear disasters.

To learn more about radioactive
https://brainly.com/question/25750315
#SPJ4

At 298 K and 1 atm, bromine is a liquid with high vapor pressure, while chlorine is a gas. This proves that the intermolecular forces of bromine are greater than those of chlorine under these conditions.

At a temperature of 298 K and a pressure of 1 atm, bromine is in a liquid state due to the strong attraction between Br-Br molecules.

At the same temperature and pressure, chlorine exists in the gaseous state due to covalent bonds, while bromine has non-polar covalent bonds.

Learn more about covalent bond visit:

brainly.com/question/12661797

#SPJ4

The goal of the light reaction is to make NADH an high energy electron transporter and ATP an energy storing molecule.

The energy storage molecule ATP and the reduced electron carrier NADPH are produced by the light-dependent processes using light energy, which is required for the subsequent stage of photosynthesis. Light reactions in plants occur in the thylakoid membranes of organelles referred to as chloroplasts.

The light reactions are largely controlled by photosystems, sizable complexes of proteins and pigments (light-absorbing molecules) that are designed to capture light. Photosystem I (PSI) and Photosystem II are the two different types of photosystems (PSII).

Both photosystems have a variety of pigments that aid in the absorption of light energy as well as a unique pair of chlorophyll molecules at the reaction center. P700 denotes the special pair of photosystem I, while P600 denotes the unique pair of photosystem II.

Learn more about light reaction

brainly.com/question/13349357

#SPJ4

There is 2.43 mg of ascorbic acid in the 5.00-mL sample, or 48.6 mg/100 mL of orange juice.

Explanation:

For i2+na2s2o3 titration,

I2 + 2 S2O3^-2 <--> 2 I^-1 + S4O6^-2

13.82 mL of 0.07203 M Na2S2O3 was needed to reach the starch indicator end point.

Number of moles of Na2S2O3 = 13.82*0.07203= 0.9954546 millimoles.

So, number of moles of excess I2 = 0.9954546/2 = 0.4977273 millimoles.

For oxidizing the ascorbic acid to dehydroascorbic acid

C6H8O6 + I2 --> C6H6O6 + 2 H+ + 2 I-

SO 1mole of I2 read for 1 mole of C6H8O6.

Initial I2 used = 50*0.01023 = 0.5115 millimoles.

Number of moles of I2 used = 0.5115 - 0.4977273 = 0.0137727 millimoles.

Number of moles of C6H8O6 in5 ml of orange juice = 0.0137727 millimoles.

Weight of C6H8O6 in5 ml of orange juice = number of moles * molecular weight = 0.0137727 * 176 = 2.4239952 mg

In 100 ml of orange juice = 2.4239952/5) *100 = 48.479904 milligrams per 100 mL. is the answer.

To learn more about ascorbic acid visit;

https://brainly.com/question/14793819

#SPJ4

The final concentration of the mixture depends on the value of x.

Value is the worth of something. It can refer to the monetary worth of an item or service, the usefulness of something, or the importance of an idea, belief, or experience. Value is a subjective concept and can vary from person to person. Generally, it is the positive attributes that an individual or group associates with something that determines its value. The economic concept of value is based on the idea that the value of a good or service is determined by its cost, supply, and demand.

The final concentration of the mixture is equal to:
(200 mL x 10%) + (x mL x 40%) / (200 mL + x mL)

To learn more about Value
https://brainly.com/question/25134328
#SPJ4

H2(g) + Cl2(g) = 2 HCl (g) AH-184.6 kJ where the mathematical notation for "is equivalent to" is. However, we also have a quantity called energy change in our thermochemical equation

Thermochemical equations are symmetric chemical equations that take into account both the energy change and the physiological state of all products and reactants. When energy is a reactant, a reaction is endothermic; whereas, when energy is a product, a reaction is exothermic.

A balance empirical formula with its heat per reaction is known as a thermochemical equation. They appear to be equal to A+B+C+H=Xjoules. You are already proficient at creating and balancing chemical equations. Therefore, all we must do is add either H or U values.

To know more about Thermochemical equation visit:

brainly.com/question/2874342

#SPJ1

Only the molecules of NO, SO2 are polar. These chemicals are referred to as polar solvents since they have both positive as well as ends.

a structure where the density of electrons is unevenly distributed. Nonpolar refers to a structure where the density of electrons is more or more uniformly distributed. Numerous physical, molecular, and ecological properties of molecules are influenced by polarity, which can take many different forms.

A polar molecule bond is one in which there is an electrostatic potential difference in between atoms of between 0.5 and 2.0. A polar covalent link is a type of covalent bond with which the atoms are attracted to electrons in uneven amounts, resulting in looked.

To know more about polar visit:

https://brainly.com/question/11405437

#SPJ1

Capillary action involves the hydrogen bonding in water.

We have to note that when we are talking about capillary action, what we mean is the movement of water up the paper. We know that this movement of water would have a lot to do with the kind of intermolecular interaction that is going on.

Note that the water is composed of polar O-H bonds that can be able to interact with the -OH bonds that can be seen in the cellulose that is water and this accounts for the capillary action in water.

Learn more about capillary action:https://brainly.com/question/13228277

#SPJ1

The basketball velocity is 40 m/s.

A vector quantity with both size and direction is velocity. In respect to time, it is the rate with which a displacement changes. Using the formula velocity = displacement/time, velocity may be computed. It is a way to gauge how quickly something is moving in a certain direction. Acceleration, or the rate at which an object's velocity changes, is closely related with velocity. Being a vector quantity, velocity has both a direction and a magnitude. An object must move at the a constant speed and in the same direction in order to maintain a constant velocity.

To learn more about velocity
https://brainly.com/question/29215982
#SPJ4

The surface temperature of a block of solid carbon dioxide (dry ice) is -78.5 degrees Celsius (-109.8 degrees F). Once it reaches this temperature, carbon dioxide completely bypasses the liquid state and transforms into a gas. One pound of dry ice produces 250 liters of carbon dioxide gas!

Carbon dioxide in the form of dry ice is employed. Sublimation is the process by which CO2 transforms from a solid to a gas without first undergoing a liquid phase, and it takes place at pressures lower than 5.13 atm and temperatures higher than 56.4 °C (216.8 K; 69.5 °F) (the triple point).

When a substance changes immediately from a solid to a gas without melting beforehand. The carbon dioxide is still present; it simply passes.

Learn more about dry ice

brainly.com/question/13972158

#SPJ4

Answer:

Sublimation

Explanation:

C

The remaining mass of hydrogen that is present in the reaction is 0.20 grams.

The balanced chemical reaction can be depicted as follows:

2H2+O2---->2H2O

1 mole of Oxygen reacts with 2 moles of Hydrogen in order to produce two moles of water i.e., H2O.

0.15 moles of O2  reacts with 2 * 0.15 = 0.30 moles of H2

The moles of H2 are given i.e., 0.40 moles.

So remaining = 0.40 moles - 0.30 moles = 0.10 moles

Thus, the mass of H2 can be calculated by multiplying the number of moles with the molar mass that is expressed as follows:

Mass = moles * molar mass

Molar mass of H2= 2 g/mol

Mass of H2 remained in the reaction = 0.10 moles * 2 g/mole = 0.20 grams.

To learn more about number of moles check the link below:

https://brainly.com/question/28037816

#SPJ4

Answer:

It can be done by crystallization, filtration, and sublimation. The easiest method among the three is separation by sublimation. Ammonium chloride sublimes upon heating. Actually, the sublimation is a decomposition of ammonium chloride forming ammonia and hydrogen chloride

Explanation: