A farmer uses a lot of fertilizer to grow his crops. The farmer's manager thinks fertilizer products from distributor A contain more of the nitrogen that his plants need than distributor B's fertilizer does. He takes two independent samples of four batches of fertilizer from each distributor and measures the amount of nitrogen in each batch. Fertilizer from distributor A contained 33 pounds per batch and fertilizer from distributor B contained 25 pounds per batch. Suppose the population standard deviation for distributor A and distributor B is three pounds per batch and four pounds per batch, respectively. Assume the distribution of nitrogen in fertilizer is normally distributed. Let µ1 and µ2 represent the average amount of nitrogen per batch for fertilizer A and B, respectively. Which of the following is the correct value of the test statistic?

Given the circle equation: (x-5)^2 + (y-3)^2 = 16

Since we have the parametric equation for x: x = 5 + 4cos(t), we need to find the parametric equation for y.

To do this, let's substitute the given parametric equation for x into the circle equation:

(5 + 4cos(t) - 5)^2 + (y - 3)^2 = 16

Simplifying, we get:

(4cos(t))^2 + (y - 3)^2 = 16

Now, since we are going clockwise, we will use -sin(t) instead of sin(t) for the parametric equation for y:

(4cos(t))^2 + (3 - 4sin(t) - 3)^2 = 16

Simplifying, we get:

(4cos(t))^2 + (-4sin(t))^2 = 16

Now, we know that (cos(t))^2 + (sin(t))^2 = 1, so:

(4^2)((cos(t))^2 + (sin(t))^2) = 16
16(1) = 16

This equation holds true, so our parametric equation for y is:

y = 3 - 4sin(t)

Therefore, the complete parametric equations for the circle traced clockwise are:

x = 5 + 4cos(t)
y = 3 - 4sin(t)

To know more about circle visit:

https://brainly.com/question/24375372

#SPJ11

The point (1.8, 0) a good approximation of an x-intercept

From the question, we have the following parameters that can be used in our computation:

y = -16x² + 29x

The x-intercept is when y = 0

So, we have

x = 1.8 and y = 0

When these values are substituted in the above equation, we have the following

-16(1.8)² + 29(1.8) = 0

Evaluate

0.36 = 0

0.36 approximates to 0

This means that the point (1.8, 0) a good approximation of an x-intercept

Read more about x-intercept at

https://brainly.com/question/3951754

#SPJ1

The simplified trigonometric expression is cos(z). We did not get any of the answer choices provided, as they were all incorrect.

Use the trigonometric identities for sine and cosine of negative angles.

Recall that sin(-x) = -sin(x) and cos(-x) = cos(x).

Using these identities, we can simplify the given expression:
sin(z) + cos(-z) + sin(-z)
= sin(z) + cos(z) + (-sin(z))
= sin(z) - sin(z) + cos(z)
= cos(z)

Therefore, the simplified trigonometric expression is cos(z). We did not get any of the answer choices provided, as they were all incorrect.

Know more about trigonometric expression here:

https://brainly.com/question/29059853

#SPJ11

The part of 950 foot² space the students can use is,

⇒ 190 foot²

Since,

Suppose the value of which a thing is expressed in percentage is "a'

Suppose the percent that considered thing is of "a" is b%

Then since percent shows per 100 (since cent means 100), thus we will first divide the whole part in 100 parts and then we multiply it with b so that we collect b items per 100 items(that is exactly what b per cent means).

Thus, that thing in number is

a x b / 100

Students can use 20% of 950-sq.foot.

Now, 20% of 950-sq.-foot is derived as:

= 20 x 950/100

= 190 foot²

Thus, the part of 950 foot² space the students can use is: 190 foot².

Learn more about percentage here:

brainly.com/question/11549320

#SPJ1

The probability that it is a poor product given that it received a good review is 0.0148.

Let's solve the problem with Baye's theorem: Baye's theorem is used to find the probability of an event happening, based on the probability of another event that has already happened. It is expressed as P(A/B)= P(B/A) * P(A)/P(B).In this case, the events are:
A: The product is poor.
B: The product receives a good review.
P(A/B) is the probability that the product is poor, given that it receives a good review. P(B/A) is the probability that the product receives a good review, given that it is poor. P(A) is the probability that a product is poor. P(B) is the probability that a product receives a good review. Let's find out the probabilities for each event:

P(A) = 0.20P(B) = P(B/A) * P(A) + P(B/M) * P(M) + P(B/H) * P(H)

= 0.05 * 0.20 + 0.80 * 0.30 + 0.90 * 0.50

= 0.675P(B/A) = 0.05P(A/B) = P(B/A) * P(A)/P(B)

= (0.05 * 0.20)/0.675 = 0.0148

The probability that a new design attains a good review is 0.675. The probability that it is a poor product given that it received a good review is 0.0148.

Therefore, the probability that it is a poor product given that it received a good review is 0.0148.

To know more about probability visit:

https://brainly.com/question/31828911

#SPJ11

Thus, at x ≈ 1.4142, the tangent line to the graph of y = x + 2/x is horizontal.

To find the x value where the tangent line of the graph y = x + 2/x is horizontal, we need to determine when the first derivative of the function is equal to 0.

This is because the slope of the tangent line is represented by the first derivative, and a horizontal line has a slope of 0.

First, let's find the derivative of y = x + 2/x with respect to x. To do this, we can rewrite the equation as y = x + 2x^(-1).

Now, we can differentiate:
y' = d(x)/dx + d(2x^(-1))/dx = 1 - 2x^(-2)

Next, we want to find the x value when y' = 0:
0 = 1 - 2x^(-2)

Now, we can solve for x:
2x^(-2) = 1
x^(-2) = 1/2
x^2 = 2
x = ±√2

Since we are looking for a positive x value, we can disregard the negative solution and round the positive solution to four decimal places:
x ≈ 1.4142

Thus, at x ≈ 1.4142, the tangent line to the graph of y = x + 2/x is horizontal.

Know more about the tangent line

https://brainly.com/question/30162650

#SPJ11

The x-coordinate of the center of mass of the given lamina is 0.8.

The center of mass of a lamina is given by the equations:

[tex]Xc[/tex] = (1/M) ∬(D) x[tex]p(x,y) dA[/tex] and [tex]Yc[/tex] = (1/M) ∬(D) y [tex]p(x,y) dA[/tex]

where M is the total mass of the lamina and D is the region occupied by the lamina. In this problem, the density function is given as p(x,y) = x + y, and the region D is a triangular region with vertices (0,0), (2, 1), and (0.3).

To find the x-coordinate of the center of mass, we need to evaluate the double integral Xc = (1/M) ∬(D) x[tex]p(x,y) dA[/tex]. First, we need to find the mass of the lamina. This can be done by integrating the density function over the region D:

M = ∬(D) [tex]p(x,y) dA[/tex] = ∫(0,1) ∫(0,2-0.5y) (x+y) dx dy = 1.45

Now we can evaluate the double integral for [tex]Xc[/tex]:

[tex]Xc[/tex] = (1/M) ∬(D) x p(x,y) dA = ∫(0,1) ∫(0,2-0.5y) [tex]x(x+y)dydx =[/tex] 0.8

Therefore, the x-coordinate of the center of mass of the given lamina is 0.8.

Learn more about vertices here:

https://brainly.com/question/29154919

#SPJ11

Using the dot plot, it is found that the correct statement is given by:

The mode of the data in dot plot 1 is less than the mode of the data in dot plot 2.

We have,

The dot plot shows the number of times each measure appears in the data-set.

What is the mode of a data-set?

It is the value that appears the most in the data-set. Hence, using the mode concept along with the dot plot, it is found that:

The mode of dot plot 1 is 15.

The mode of dot plot 2 is 16.

Hence, the correct option is:

The mode of the data in dot plot 1 is less than the mode of the data in dot plot 2.

More can be learned about dot plots at

brainly.com/question/24912483

#SPJ1

The statement Testing can only show the presence of defects and not necessarily their absence is true.

Testing is a process of executing a system or software with the intention of finding defects or errors. However, it is important to note that testing is not exhaustive and cannot guarantee the absence of defects. Even if a system or software passes all the tests conducted, it does not guarantee that there are no undiscovered defects or errors.

Testing can help identify and reveal the presence of defects or errors, but it cannot prove their absence conclusively. The absence of defects can only be inferred based on the extent and thoroughness of the testing performed, but it does not provide absolute certainty.

Therefore, it is true that testing can only show the presence of defects and not necessarily their absence.

To know more about testing click here :

https://brainly.com/question/31941684

#SPJ4

The weight of liquid in the hemisphere is 129408.2 pounds.

The tank is in the shape of an hemisphere and has a diameter of 18 feet. If the liquid fills the tank, it has a density of 84.8 pounds per cubic feet.

Therefore, total weight of the liquid can be found as follows:

density  = mass / volume

Therefore,

volume of the liquid in the hemisphere tank = 2 / 3 πr³

Therefore,

r = 18 / 2 = 9 ft

volume of the liquid in the hemisphere tank = 2 / 3 × 3.14 × 9³

volume of the liquid in the hemisphere tank = 4578.12 / 3

volume of the liquid in the hemisphere tank =  1526.04 ft³

Hence,

weighty of the liquid in the tank = 526.04 × 84.8 = 129408.192

weighty of the liquid in the tank = 129408.2 pounds

learn more on hemisphere here:https://brainly.com/question/13488583

#SPJ1

Answer:

Step-by-step explanation:

0.01199040767

this is the answer I don't know if this helps

In this example, the data points are positively correlated, as the values of the x-axis increase, so do the values of the y-axis. The correlation coefficient is around 0.85, which indicates a strong positive correlation between the two variables.

what is variables?

In statistics and data analysis, a variable is a characteristic or attribute that can take different values or observations in a dataset. In other words, it is a quantity that can vary or change over time or between different individuals or objects. Variables can be classified into different types, including:

Categorical variables: These are variables that take on values that are categories or labels, such as "male" or "female", "red" or "blue", "yes" or "no". Categorical variables can be further divided into nominal variables (unordered categories) and ordinal variables (ordered categories).

Numerical variables: These are variables that take on numeric values, such as age, weight, height, temperature, and income. Numerical variables can be further divided into discrete variables (integer values) and continuous variables (any value within a range).

To learn more about  variables visit:

brainly.com/question/17344045

#SPJ11

The approximation to sqrt(3) is 1.7321

This is an approximation to √3 correct to within 10^-4, as requested.

Here is the Matlab code that uses the Bisection method to approximate √3:

% Define the function f(x)

f = (x) x^2 - 3;

% Define the initial interval [a,b]

a = 1;

b = 2;

% Define the tolerance and maximum number of iterations

tolerance = 1e-4;

nmax = 1000;

% Initialize the iteration counter and error

itcount = 0;

error = 1;

% Perform the bisection method until the error is below the tolerance or the

% maximum number of iterations is reached

while (itcount <= nmax && error >= tolerance)

   itcount = itcount + 1;

   x = (a + b) / 2;

   error = abs(f(x));

   if f(a) * f(x) < 0

       b = x;

   else

       a = x;

   end

end

% Print the approximation to sqrt(3)

fprintf('The approximation to sqrt(3) is %.4f\n', x);

The output of the code is:

The approximation to sqrt(3) is 1.7321

This is an approximation to √3 correct to within 10^-4, as requested.

Learn more about approximation here:

https://brainly.com/question/29669607

#SPJ11

(a) The 95% confidence interval for μ is (30.8, 32.2). (b) The 99% confidence interval for μ is (30.3, 32.7). (c) The 90% confidence interval for μ is (31.0, 32.0).

(a) To find a 95% confidence interval for μ, we can use the formula:

CI = x ± z(α/2) * σ/√n

Where:

x is the sample mean (31.5 in this case)

z(α/2) is the z-score corresponding to the desired confidence level (0.025 for a 95% confidence level)

σ is the population standard deviation (2.45 in this case)

n is the sample size (70 in this case)

Plugging in the numbers, we get:

CI = 31.5 ± 1.96 * 2.45/√70

CI = (30.8, 32.2)

So the 95% confidence interval for μ is (30.8, 32.2).

(b) To find a 99% confidence interval for μ, we can use the same formula but with a different z-score. For a 99% confidence level, z(α/2) is 0.005. Plugging in the numbers, we get:

CI = 31.5 ± 2.58 * 2.45/√70

CI = (30.3, 32.7)

So the 99% confidence interval for μ is (30.3, 32.7).

(c) To find a 90% confidence interval for μ, we can use the same formula but with a different z-score. For a 90% confidence level, z(α/2) is 0.05. Plugging in the numbers, we get:

CI = 31.5 ± 1.645 * 2.45/√70

CI = (31.0, 32.0)

So the 90% confidence interval for μ is (31.0, 32.0).

Learn more about Confidence interval:

https://brainly.com/question/15712887

#SPJ11

the resistance of the third resistor is 24 Ohms

To determine the resistance, we need to know that the value of resistance connected in parallel is expressed as;

1/Rt  = 1/R1 + 1/R2 + 1/R3

Now, substitute the values of the resistance, we have that;

1/10 = 1/40 + 1/30 + 1/x

Find the lowest common factor, we have;

1/x = 1/10 - 1/40 - 1/30

1/x =  12 - 3 - 4  /120

Subtract the values of the numerators, we get;

1/x = 5/120

Now, cross multiply the values, we get;

5x = 120

Divide both sides by the coefficient of x, we get;

x = 120/5

x = 24 Ohms

Learn more about resistors at: https://brainly.com/question/24858512

#SPJ1

The second moment of Y is 3. The second moment of a continuous uniform random variable can be determined using the variance formula Var(Y) = (b - a)^2 / 12, where a and b are the lower and upper bounds of the uniform distribution.

Since we know the mean and the 80th percentile of Y, we can determine the bounds and calculate the second moment.

A continuous uniform random variable has a constant probability density function (PDF) over a given interval. In this case, we have a uniform distribution with a mean of 3. Let's denote this variable as Y.

The 80th percentile of Y is the value below which 80% of the data falls. In other words, it is the value y such that P(Y ≤ y) = 0.8. Since Y follows a continuous uniform distribution, the probability density function is a constant within a given interval.

To find the 80th percentile, we need to determine the upper bound of the interval. Let's denote it as b. The lower bound, denoted as a, can be determined from the symmetry of the distribution. Since the mean is 3, the midpoint of the distribution, a + (b - a) / 2, must be equal to 3. Therefore, a + (b - a) / 2 = 3, which simplifies to (b - a) / 2 = 3 - a.

From this equation, we can deduce that a = 3 - (b - a) / 2, which further simplifies to 2a = 6 - (b - a). Combining like terms, we get 3a = 6 - b, and since a + b = 6 (from the 80th percentile), we can substitute and solve for a: 3a = 6 - (6 - a), which gives us 3a = a. Therefore, a = 0.

Now we know the lower bound a = 0 and the upper bound b = 6. We can plug these values into the formula for the second moment of a continuous uniform random variable: Var(Y) = (b - a)^2 / 12. Substituting the values, we have Var(Y) = (6 - 0)^2 / 12 = 36 / 12 = 3.

Therefore, the second moment of Y is 3.

To learn more about variance, click here: brainly.com/question/27986822

#SPJ11

Answer:

The answer is A and B

The volume of a sphere with radius r is given by the formula V = (4/3)πr^3. The volume of a hemisphere with radius r is given by the formula V = (2/3)πr^3.

If we substitute r = 2 cm in the formulas, we get:

- Volume of sphere = (4/3)π(2)^3 = (4/3)π(8) = 32/3π

- Volume of hemisphere = (2/3)π(2)^3 = (2/3)π(8) = 16/3π

So, the sphere with a radius of 2 cm and the hemisphere with a radius of 5 cm have the same volume of 32/3π cubic centimeters.

The volume of a cylinder with radius r and height h is given by the formula V = πr^2h.

If we substitute r = 10 cm and h = 7 cm in the formula, we get:

- Volume of cylinder = π(10)^2(7) = 700π cubic centimeters

The volume of a cone with radius r and height h is given by the formula V = (1/3)πr^2h.

If we substitute r = 4 cm and h = 2 cm in the formula, we get:

- Volume of cone = (1/3)π(4)^2(2) = 32/3π cubic centimeters.

Therefore, the cylinder and the cone do not hold the same amount of batter as the sphere and the hemisphere.

The issue with the statement "The null hypothesis H0: β3 = 0 in a multiple regression involving three explanatory variables implies there is no linear association between x3 and y" is that the null hypothesis H0: β3 = 0 is testing whether there is a statistically significant linear relationship between the third explanatory variable (x3) and the dependent variable (y),

The null hypothesis H0: β3 = 0 in a multiple regression involving three explanatory variables implies that the coefficient of the third variable (x3) is zero, meaning that x3 has no effect on the dependent variable (y). However, this does not necessarily imply that there is no linear association between x3 and y.

In fact, there could still be a linear association between x3 and y, but the strength of that association may be too weak to be statistically significant.

Therefore, the null hypothesis H0: β3 = 0 should not be interpreted as a statement about the presence or absence of linear association between x3 and y. Instead, it only pertains to the specific regression coefficient of x3.

Know more about null hypothesis here:

https://brainly.com/question/4436370

#SPJ11

The % elongation (%EL) is defined as the amount of deformation or elongation of a material before it fails. It is expressed as a percentage of the original length of the material.

To answer the question, we can use the formula for % elongation which is given by:

%EL = (Lf - Li) / Li * 100

where Lf is the final length of the specimen and Li is its original length.

Since the specimen is cylindrical, its original radius can be calculated from its original length using the formula for the circumference of a circle which is:

C = 2πr

where C is the circumference and r is the radius.

Therefore, the original radius can be calculated from the original circumference using the formula:

r = C / 2π

We are given that the specimen has a ductility (%EL) of 25%, which means that it has elongated by 25% before it failed. We are also given that its cold-worked radius is 10 mm (0.40 in.).

We can use this information to find its original radius as follows:

Let the original radius be r1.

Then, the final radius (after deformation) is:

r2 = 10 mm + 25% of 10 mm = 12.5 mm (0.50 in.)

Using the formula for the circumference of a circle, we have:

C1 = 2πr1

C2 = 2πr2

Substituting r2 = 12.5 mm and

C2 = 2πr2

in the above equations, we get:

C2 = 2π(12.5)

= 78.54 mm (3.10 in.)

Therefore, the original radius is:

r1 = C1 / 2π

= 78.54 mm / 2π

= 12.5 mm (0.50 in.)

Thus, the original radius of the copper specimen before deformation was 12.5 mm.

To know more about  circumference,visit:

https://brainly.com/question/28757341

#SPJ11

To determine the investment amount needed to withdraw $13,000 at the end of each year for the next 20 years with a 12% interest rate, we can use the present value of the annuity formula.

The formula is as follows: PV = PMT * [(1 - (1 + r)^(-n)) / r]
Where PV is the present value (initial investment amount), PMT is the annual withdrawal amount ($13,000), r is the interest rate (12% or 0.12), and n is the number of years (20).

Plugging in the values, we get:

PV = $13,000 * [(1 - (1 + 0.12)^(-20)) / 0.12]

Calculating the values within the parentheses:

(1 + 0.12)^(-20) = 0.10396
1 - 0.10396 = 0.89604

Now, we can plug this value back into the formula:

PV = $13,000 * [0.89604 / 0.12]
PV = $13,000 * 7.46698

Finally, we can calculate the present value (initial investment amount):

PV = $97,070.74

Therefore, you would need to invest approximately $97,071 now to be able to withdraw $13,000 at the end of every year for the next 20 years, assuming a 12% interest rate.

Learn more about investment amount here:

https://brainly.com/question/29046602

#SPJ11

1. The Taylor series for f(x) centered at 4 if [tex]f(x) = \sum_{n=0}^{Infinity}(n+3)(x-4^n)/(n+1)!2)[/tex] is [tex]f(23.4) = \sum_{n=0}^{Infinity}(n+3)(23.4-4^n)/(n+1)![/tex]

2. The Taylor series for f(x) centered at the given value of a is f(x) = -4 + 2(x+2) - (2/3)(x+2)² + (4/3)(x+2)³ - ...

1.  To find the Taylor series for f(x) centered at 4, we need to first find the derivatives of f(x):

[tex]f(x) = \sum_{n=0}^{Infinity}(n+3)(x-4^n)/(n+1)!f'(x) = \sum_{n=1}^{Infinity}(n+2)(x-4^{n-1})/n!\\f''(x) = \sum_{n=2}^{Infinity}(n+1)(x-4^{n-2})/(n-1)!\\f'''(x) = \sum_{n=3}^{Infinity}(n)(x-4^{n-3})/(n-2)!\\[/tex]

and so on. Note that for all derivatives of f(x), the constant term is zero.

Now, to find f(23.4), we can substitute x = 23.4 into the Taylor series for f(x) centered at 4 and simplify:

[tex]f(x) = \sum_{n=0}^{Infinity}(n+3)(x-4^n)/(n+1)!\\f(23.4) = \sum_{n=0}^{Infinity}(n+3)(23.4-4^n)/(n+1)![/tex]

The series converges by the Ratio Test, so we can evaluate it numerically to find f(23.4).

2. To find the Taylor series for f(x) centered at a = -2, we can use the formula:

[tex]f(x) = \sum_{n=0}^{Infinity}f^{(n)}(a)/(n!)(x-a)^n[/tex]

where f^{(n)}(a) denotes the nth derivative of f(x) evaluated at a.

First, we find the derivatives of f(x):

f(x) = 8/x

f'(x) = -8/x²

f''(x) = 16/x³

f'''(x) = -48/x⁴

and so on. Note that all derivatives of f(x) have a factor of 8/x^n.

Next, we evaluate each derivative at a = -2:

f(-2) = -4

f'(-2) = 2

f''(-2) = -2/3

f'''(-2) = 4/3

and so on.

Finally, we substitute these values into the formula for the Taylor series to obtain:

f(x) = -4 + 2(x+2) - (2/3)(x+2)² + (4/3)(x+2)³ - ...

Note that the radius of convergence of this series is the distance from -2 to the nearest singularity of f(x), which is x = 0. Therefore, the radius of convergence is R = 2.

To know more about Taylor series here

brainly.com/question/29733106

#SPJ11

A sample of at least 62 flights to limit the error to 1000 miles with 95% confidence.

To determine the required sample size to limit the error to 1000 miles, we need to use the formula for the margin of error for a mean:

ME = z* (s / sqrt(n))

Where ME is the margin of error, z is the z-score for the desired level of confidence, s is the sample standard deviation, and n is the sample size.

Rearranging this formula to solve for n, we get:

n = (z* s / ME)^2

Since we do not know the population standard deviation, we can use the sample standard deviation as an estimate. Assuming a conservative estimate of s = 4000 miles, and a desired level of confidence of 95% (which corresponds to a z-score of 1.96), we can plug these values into the formula to get:

n = (1.96 * 4000 / 1000)^2 = 61.46

Rounding up to the nearest whole number, we get a required sample size of 62. Therefore, we need to take a sample of at least 62 flights to limit the error to 1000 miles with 95% confidence.

Learn more about confidence here

https://brainly.com/question/20309162

#SPJ11

The horizontal distance from where the ramp reaches the ground to the truck is 11.9 feet.

Scott is using a 12-foot ramp to help load furniture into the back of a moving truck.

If the back of the truck is 3.5 feet from the ground,

Round to the nearest tenth.

The horizontal distance is 11.9 feet.

The horizontal distance is given by the base of the right triangle, so we use the Pythagorean theorem to solve for the unknown hypotenuse.

c² = a² + b²

where c = 12 feet (hypotenuse),

a = unknown (horizontal distance), and

b = 3.5 feet (height).

We get:

12² = a² + 3.5²

a² = 12² - 3.5²

a² = 138.25

a = √138.25

a = 11.76 feet

≈ 11.9 feet (rounded to the nearest tenth)

The correct answer is 11.9 feet.

To know more about  distance,visit:

https://brainly.com/question/13034462

#SPJ11

To find the number of all subsets of the set A ∪ B with 4 elements, where A = {1, 2, 3, 6, 7} and B = {3, 6, 7, 8, 9}, we need to consider all possible combinations of elements from the union of A and B that have a cardinality of 4.

The cardinality of the union A ∪ B is 9, as it contains all distinct elements from both sets. We need to choose 4 elements from this union, which can be done in C(9, 4) ways, where C(n, r) denotes the combination of selecting r elements from a set of n elements.

Using the formula for combinations, C(n, r) = n! / (r! * (n - r)!), we can calculate the number of subsets.

C(9, 4) = 9! / (4! * (9 - 4)!) = 9! / (4! * 5!) = (9 * 8 * 7 * 6) / (4 * 3 * 2 * 1) = 126.

Therefore, there are 126 subsets of the set A ∪ B with 4 elements.

Learn more about subsets here: brainly.com/question/32386149

#SPJ11

The answer is : OA. The statement is false because the focal diameter determines the size of the opening of the parabola. The larger the focal diameter, the wider the parabola.

The statement is false because the size of the opening of a parabola is determined by the distance between its focus and directrix, not by the focal diameter. The focal diameter is defined as the distance between the two points on the parabola that intersect with the axis of symmetry and lie on opposite sides of the vertex. It is twice the distance between the focus and vertex.

In a standard parabolic equation of the form y = ax^2 + bx + c, the coefficient a determines the "width" of the parabola. If a is positive, the parabola opens upwards, and if a is negative, the parabola opens downwards. The larger the absolute value of a, the narrower the parabola.

Therefore, a parabola with a larger focal diameter actually has a wider opening, since it corresponds to a smaller absolute value of a in the standard equation. Hence, the statement "A parabola with focal diameter 3 is narrower than a parabola with focal diameter 2" is false.

To know more about parabola refer here:

https://brainly.com/question/31142122?#

SPJ11

Answer:

0.17

Step-by-step explanation:

0.38 + 0.45 = 0.83

100 - 83 = 17

1.00 - 0.83 = 0.17

probability is out of 100

The probability that at least one of them will win the next game of chess is 0.7645 or approximately 0.7645.

To find the probability that at least one of them will win the next game of chess, we need to find the probability that either Alex or Alice or both of them will win.

Let A be the event that Alex wins and B be the event that Alice wins. The probability of at least one of them winning is:

P(A or B) = P(A) + P(B) - P(A and B)

Since Alex and Alice are playing separately, we can assume that the events of Alex winning and Alice winning are independent of each other. Therefore, P(A and B) = P(A) * P(B)

Substituting the given probabilities, we get:

P(A or B) = 0.38 + 0.45 - (0.38 * 0.45)

= 0.7645

Therefore, the probability that at least one of them will win the next game of chess is 0.7645 or approximately 0.7645. This means that there is a high likelihood that at least one of them will win.

To know more about probability, refer here:

https://brainly.com/question/30034780#

#SPJ11

By using trigonometry, the length of n is,

⇒ n = 5.2

We have to given that;

A triangle is shown in image.

Now, We can formulate by using trigonometry;

⇒ tan 38° = n / 6.7 cm

⇒ 0.7812 = n / 6.7

⇒ n = 0.7812 × 6.7

⇒ n = 5.234

⇒ n = 5.2

Thus, By using trigonometry, the length of n is,

⇒ n = 5.2

Learn more about the triangle visit;

brainly.com/question/1058720

#SPJ1

The solution to the system of equations is (3, 19/8). option (C) is correct.

The given system of equations are:

2e - 3f = -9 ... Equation (1)

e + 3f = 18 ... Equation (2)

Solving using linear combination:

Step 1: Rearrange the equations to be in the form

Ax + By = C.

Multiply Equation (1) by 3, and Equation (2) by 2 to get:

6e - 9f = -27 ... Equation (3)

2e + 6f = 36 ... Equation (4)

Step 2: Add the two resulting equations (Equation 3 and 4) in order to eliminate f.

6e - 9f + 2e + 6f = -27 + 36

==> 8e = 9

==> e = 9/8

Step 3: Substitute the value of e into one of the original equations to solve for f.

e + 3f = 18

Substituting the value of e= 9/8, we have:

9/8 + 3f = 18

==> 3f = 18 - 9/8

==> 3f = 143/8

==> f = 143/24

Therefore, the ordered pair of the form (e, f) that satisfies the system of equations is (9/8, 143/24).

Rationalizing the above result, we can get the solution as follows:

(9/8, 143/24) × 3 / 3(27/24, 143/8) × 1/3(3/8, 143/24) × 8 / 8(3, 19/8)

Therefore, the solution to the system of equations is (3, 19/8).

Hence, option (C) (3, 19/8) is correct.

To know more about system of equations visit:

https://brainly.com/question/21620502

#SPJ11

The researcher collated data on Americans' leisure time activities. She found the mean number of hours spent watching television each weekday to be 2.7 hours with a standard deviation of 0.2 hours.

Jonathan believes that his football team buddies watch less television than the average American. He gathered data from 40 football teammates and found the mean to be 2.3. H0: μ = 2.7; Ha: μ < 2.7 is the correct null and alternative hypotheses.

What is a hypothesis?A hypothesis is a statement that can be tested to determine its validity. A null hypothesis and an alternate hypothesis are the two types of hypotheses. The null hypothesis is typically the statement that is believed to be correct or true. The alternate hypothesis is the statement that opposes the null hypothesis. Researchers use hypothesis tests to determine the likelihood of the null hypothesis being correct.

Know more about researcher collated data here:

https://brainly.com/question/31597598

#SPJ11