The required amount of power left for mechanical work by the DC motor is calculated to be 10300 w.
The current drawn by the motor = 50 A
Voltage of the DC motor = 230 v
Power dissipated as heat = 1200 w
The formula to calculate power dissipated by the motor;
P = V I
where, P is power
V is voltage
I is current
So, putting the known values into the above equation, we have,
P = V I = 230 × 50 = 11500 w
As some amount of power is dissipated as heat, the power left for mechanical work is;
⇒ 11500 - 1200 = 10300 w
Thus, the required amount of power is 10300 w.
To know more about power:
https://brainly.com/question/23712735
#SPJ4
Which is the equation for terminal velocity?
The correct equation for the terminal velocity is Option A
What is the terminal velocity?Terminal velocity is the maximum velocity an object will attain while falling through a fluid (such as air or water) under the influence of gravity. It occurs when the sum of the drag force and buoyant force acting on the object is equal in magnitude to its weight, and the object no longer accelerates.
The terminal velocity of an object depends on its mass, size, shape, and the density of the fluid it is falling through. For example, a larger and heavier object will have a higher terminal velocity than a smaller and lighter object.
Learn more about terminal velocity:https://brainly.com/question/2654450
#SPJ1
how to combine x and y components of velocity
The total velocity of an object may be calculated by adding the x and y components since velocity is a vector (it has magnitude and direction):
[tex]v^2 = vx^2 + vy^2.[/tex]
An item that is given a starting velocity and is affected by gravity is referred to as a projectile. These outcomes define the course the item takes (ignoring air resistance). The object's course is along this path. Both vertical (y) and horizontal (x) components make up the trajectory.The combined velocity can be calculated by taking the square root of the sum of the squares of the x and y components. This is known as the Pythagorean Theorem:
[tex]v_total = \sqrt(v_x^2 + v_y^2)[/tex]
learn more about velocity Refer:brainly.com/question/18084516
#SPJ4
A positive charge, q1, is placed on the +y axis some distance from the origin (say a distance of d from the origin on the +y axis). Another negative charge, q2, is also placed on the +y axis, twice as far away from the origin. Also, the magnitude (absolute of the charge) is a factor of 3 larger than the magnitude of the q1. Lastly, a third charge of q3 which is positive, is placed on the +x axis a factor of 3.4 times closer than q1 and the magnitude of its charge is a factor of 3 times smaller than q1. The magnitude of the total electric field at the origin is 5.7 x 10^6 N/C. What is the magnitude of the electric field from q3 at the origin in 10^6 N/C? In other words, if the answer is 2.5 x 10^6 N/C, enter 2.5 Electric field -
The electric field from q₃ at the origin is 2.5 x 10⁶ N/C when q₁ is placed on the =y axis ome distance from origin .
What is the electric field?An area of influence created by an electric charge is known as the electric field. It is an invisible field that causes other charges in its vicinity to experience an electric force. Depending on the charge's sign, this electric force can be either attractive or repellent. The amount of charge and the distance from the charge determine the magnitude of the electric field.
Electric fields are utilized in numerous applications and are necessary for comprehending the behavior of electric circuits and devices.
E = kq/r²,
where k is the Coulomb's constant, q is the charge of the source, and r is the distance from the source to the location of interest, can be used to calculate this.
The Coulomb's constant is 8.99 x 109 Nm²/C²,
the charge of q₃ is q₁/3, and
the distance between q₃ and the origin is d/3.4.
As a result, the electric field from q₃ at the origin is given by
E = (8.99 x 10⁹ Nm²/C²)(q₁/3)/[(d/3.4)²,
which can be simplified to E = 2.5 x 10⁶ N/C.
Learn more about Electric field :
brainly.com/question/14372859
#SPJ4
When a 3000 kg load is applied to a 10-mm-diameter ball in a Brinell test of a steel, an indentation of 3.1 mm diameter is produced. Estimate the tensile strength of the steel.
The Brinell hardness number is calculated by the following formula Tensile Strength = 2272.3 x 7.86 = 17,982.3 N/mm² .
What is the Strength ?The strength of an individual or a group of people is the inner capacity to achieve a desired result. It is the ability to push through difficult times and stay focused on a goal. Strength can be physical, mental, emotional, or spiritual. A strong individual is resilient, determined, and has a positive attitude. Strength may come from within, from external sources such as friends and family, or from a combination of both. It can be developed through practice and determined effort. Strength can be used in many areas of life such as problem solving, creativity, and perseverance. It can also help with dealing with stress, anxiety, and depression.
The Brinell hardness number is calculated by the following formula:
BHN = 2P/πD²
Where:
P = Load in kg
D = Diameter of indentation in mm
BHN = 2(3000)/π(3.1)² = 2272.3
The tensile strength of the steel is then estimated by the following formula:
Tensile Strength = BHN x 7.86
Tensile Strength = 2272.3 x 7.86 = 17,982.3 N/mm²
To learn more about Strength
https://brainly.com/question/12785175
#SPJ4
what is the correct voltage 48.0 if the selector switch is in the 200v position?
The correct voltage is 200 volts.
Voltage is the electrical potential difference between two points in an electrical circuit, expressed in volts. It is the force that causes current to flow through a circuit.A selector switch is a type of switch used to select one of a number of circuit configurations. Selector switches are usually used to change the state of a system or device, such as switching between two different power sources or activating a specific function within a circuit.
The equation is:
[tex]Vout = \frac{Vselector * 48.0 }{ 100}[/tex]
where Vout is the output voltage, Vselector is the selector switch voltage, and 100 is the default selector switch voltage. In this case,
[tex]Vselector = 200 volts[/tex],
[tex]Vout = \frac{200 * 48.0 }{ 100 }\\\\Vout = 48 volts.[/tex]
The correct voltage would be 200v. This is because when the selector switch is in the 200v position, the voltage is multiplied by the ratio of [tex]\frac{48.0}{200} = 0.24[/tex], resulting in a voltage of 200v
learn more about Voltage Refer:brainly.com/question/13521443
#SPJ4
Submit all three charts and the Velocity vs Time graph. Also, include a paragraph about what you can conclude about the relationship between a constant force
and motion.
Table C
Position (cm/s)
Time (s)
0
1
Sample Ouly
Do not write here.
2
3
4
5
Table E
Velocity (cm/s) Time (s)
0.5
1.5
Sample Only
Do not write hers
3.5
4.5
5.5
6.5
x (m)
12
2986
10
420
0
Time
(s)
0
1
2
لي
4
5
6
7
Table D
Position
(cm/s)
Velocity=
Sample Only
Do not write hore
Position vs Time
2
Average Velocity
(cm/s)
3
time (si
4
Change in position
Change in time
6
Graphs of velocity-time with constant velocity are Case 1 (zero acceleration)
Velocity-time graphs with constant acceleration are Case 2.
Case 3: Acceleration graphs of increasing velocity.
What are the three types of velocity-time graph?Graphs of velocity-time with constant velocity are Case 1 (zero acceleration).
In a velocity-time graph where time is represented by the X-axis and velocity is represented by the Y-axis, the velocity is constant when:
The velocity is constant (c), as seen on the graph, throughout the time period.
The velocity of matter particles will always be c at every instant, regardless of how much time passes. Since the initial velocity was assumed to be positive in this instance.
When the initial velocity is negative, the graph will change.
A particle's velocity will remain constant over time if its acceleration is zero (zero), which is equivalent to a constant speed of 5 m/s at time zero.
Graphs of velocity-time with constant acceleration in Case 2
The equation states that the particle's starting velocity will rise linearly as the acceleration is constant (positive) and positive.
v = u + at
U = 0 and v = at
The particle will move at a linear rate with respect to time, as depicted in the image. You can determine how much acceleration there is by looking at the graph's slope.
Example: The starting velocity is zero and grows linearly if a particle's acceleration is constant (k) and positive. You may determine the acceleration by looking at the velocity-time graph's slope.
Case 3: Acceleration graphs of increasing velocity
The equation: v = u + at predicts that the velocity-time graph will be a curve when the acceleration is increasing with time.
as v= at because u = 0
Because acceleration depends on time, the velocity-time graph will be a curve.
It should be noted that while the acceleration keeps rising with time, so too will the slope's size.
To Learn more About velocity-time Refer To:
https://brainly.com/question/14086970
#SPJ1
What phase is the Moon in at position 1?
It would be the first quarter.
Position of the Moon during the First Quarter Moon. First Quarter Moon, as the name suggests, is the second principal Moon phase that occurs when the Moon has completed one-quarter of its cycle around Earth.
What is the phase of moon in first quarter?Full Moon The lit side of the Moon is facing the Sun at this time, while the night side is facing Earth. This is the moon's invisible phase. New Moon is the first major Moon phase; Full Moon is the third; and Third Quarter Moon is the final major Moon phase.
As a result of their shared sky location during this phase, the Moon rises and sets with the Sun. In addition to being up during the day, the illuminated side is also facing away from the Earth.
Therefore, It would be the first quarter. Once the Moon has finished one-fourth of its orbital period around Earth.
Learn more about Moon here:
brainly.com/question/13538936
#SPJ4
You throw a ball with a mass of 0. 5 kg against a brick wall. It is moving horizontally to the right at 20 m/s when it hits the wall; it rebounds horizontally to the left at 20 m/s. Find the impulse of the net force on the ball during its collision with the wall.
The impulse of the net force on the ball during its collision with the wall is 20Ns.
The term "impulse" in physics refers to or measures the effect of a force acting gradually to change the velocity of an item. The letter J stands for it and it is frequently expressed in terms of Newton seconds or kilograms per second.
It's common to define impulse as the average net force acting on an object during a predetermined period of time. The following is the given equation for impulse:
J = F⋅Δt
Please take note that we consider force to be constant.
Like force, impulse is a vector quantity that also has a direction.
Impulse=m× final velocity-(-m× initial velocity)
Impulse=0.5×(20+20)
Impulse=20Ns
Learn more about impulse
brainly.com/question/904448
#SPJ4
A toy car is moving in a straight line while its speed is decreasing. What is the sign of its acceleration? A. positive B. negative C. The sign cannot be determined without more information.
Option B. Positive. The sign of acceleration depends on the direction of the change in velocity. If the speed of the toy car is decreasing, then its velocity is decreasing, which means that its acceleration is negative.
The sign of acceleration depends on the direction of the change in velocity. If the velocity is increasing, the acceleration is positive. If the velocity is decreasing, the acceleration is negative. If the velocity is staying the same, the acceleration is zero. To determine the exact sign of acceleration, more information is needed, such as the direction and magnitude of the change in velocity over time. The change in velocity, also known as the delta velocity, is defined as the difference between the final velocity and the initial velocity. The change in velocity can be positive if the final velocity is greater than the initial velocity, negative if the final velocity is less than the initial velocity, or zero if the velocity is constant. The change in velocity can be used to calculate the acceleration, using the equation: acceleration = change in velocity / time.
To learn more about velocity please click on below link.
https://brainly.com/question/18084516
#SPJ4
iven the budget line in the previous question (recall: p1 = 10, p2=4, income = 100), and given a consumer with preferences represented by the following utility function:
The budget line can be graphed by plotting the two intercepts and connecting them. The two intercepts can be found by setting x2 = 0 and x1 = 0 and solving for x1 and x2 based on the budget constraint.
x1 = income / p1 = 100 / 10 = 10
x2 = income / p2 = 100 / 4 = 25
Thus, the two intercepts are (10, 0) and (0, 25). The slope of the line is -p2/p1 = -4/10 = -2/5.
To find the optimal choice of x1, we need to find the utility-maximizing combination of x1 and x2. The utility function given is U(x1,x2) = (x1)^1/4(x2)^3/4. We can use this to find the marginal utility of each good, and set them equal to each other to find the optimal combination of the two goods.
MUx1/MUx2 = Px1/Px2 = 10/4
x1/x2 = 10/4
x2 = 4x1/10
Substituting this expression for x2 into the budget constraint:
p1x1 + p2(4x1/10) = income
10x1 + 4(4x1/10) = 100
10x1 + 1.6x1 = 100
11.6x1 = 100
x1 = 100/11.6 = 8.62
Thus, the consumer chooses to buy 8.62 units of good 1 when maximizing utility.
learn more about utility function at:
brainly.com/question/2132646
#SPJ4
1 A circuit with a battery, a 2 Ω resistor, a 16 Ω resistor, and a 24 Ω resistor in series. The total current is the system is 3.3 A. What is the voltage drop across the 2 Ω resistor?
2 A circuit with a battery, a 2 Ω resistor, a 13 Ω resistor, and a 27 Ω resistor in series. The total current is the system is 1.9 A. What is the voltage of the battery?
3 A circuit with a 100 V battery, a 37 Ω resistor, a resistor with 0.2 A across it, and another 37 Ω resistor in series. What is the resistance of the unknown resistor?
4 A circuit with 0.6 A running through the battery and two 10 Ω resistors in parallel. What is the voltage of the battery?
5 A circuit with a battery, a 8 Ω resistor, a 14 Ω resistor, and a 21 Ω resistor in parallel. The total voltage is the system is 2.8 V. What is the current through the 8 Ω resistor?
6 A circuit with a battery, a 9 Ω resistor, a 15 Ω resistor, and a 27 Ω resistor in parallel. The total voltage is the system is 10.0 V. What is the total resistance of the circuit?
7 A circuit with a battery, a 3 Ω resistor, a 12 Ω resistor, and a 27 Ω resistor in parallel. The total voltage is the system is 7.0 V. What is the current through the battery?
*work out and use units*
If a circuit with a battery, a 2 Ω resistor, a 16 Ω resistor, and a 24 Ω resistor in series. The total current is the system is 3.3 A. The voltage drop across the 2 Ω resistor is 6.6V.
How to find the voltage?1. Voltage drop across the 2 Ω resistor
Voltage drop across the 2 Ω resistor = current through the circuit × resistance of the resistor
Voltage drop across the 2 Ω resistor = 3.3 A * 2 Ω
Voltage drop across the 2 Ω resistor = 6.6 V
2. Voltage of the battery
Let V be the voltage of the battery
V = I * (R1 + R2 + R3)
= 1.9 A * (2 Ω + 13 Ω + 27 Ω) = V
Solving for V, we find that V = 79.1 V
3. Resistance of the unknown resistor
Let R be the resistance of the unknown resistor
0.2 A * R = 100 V - 37 Ω * 0.2 A - 37 Ω * 0.2 A
Solving for R
R = 5 Ω
4. Voltage of the battery
Let V be the voltage of the battery
V = 0.6 A * 10 Ω + 0.6 A * 10 Ω
= 12 V
5. Current through the 8 Ω resistor
Current through the 8 Ω resistor = 2.8 V / 8 Ω
Current through the 8 Ω resistor = 0.35 A
6. The total resistance of a parallel circuit
1/total resistance = 1/9 Ω + 1/15 Ω + 1/27 Ω
Solving for total resistance
Total resistance = 3.33 Ω
7. Current through the battery
Current through the battery = 7.0 V / 3 Ω + 7.0 V / 12 Ω + 7.0 V / 27 Ω.
Solving for the current
Current through the battery = 2.3 A
Therefore the voltage drop across the 2 Ω resistor is 6.6V.
Learn more about voltage here:https://brainly.com/question/24858512
#SPJ1
after observing different forms of energy transfer, which form or forms of energy have the least amount of waste? justify your answer with evidence you have gathered from the simulation.
Electrical energy transfer is the form of energy transfer with the least amount of waste, as it is highly efficient and produces minimal waste heat. This makes electrical energy transfer an important and reliable source of energy in modern society, as it allows us to make the most of the energy we use, reducing waste and saving resources.
Energy transfer is a crucial process in the functioning of various systems and devices. The energy can be transferred from one form to another, such as from kinetic energy to thermal energy, or from potential energy to kinetic energy. During these transfers, some energy is inevitably lost in the form of waste heat, which is useless and cannot be converted back into useful energy. The amount of waste energy generated during energy transfer varies depending on the form of energy transfer.
Detailed Explanation:
After observing different forms of energy transfer, it can be concluded that the form of energy transfer with the least amount of waste is electrical energy transfer. This is because electrical energy transfer is highly efficient, with only a minimal amount of energy being lost as waste heat.
In electrical energy transfer, electrical energy is transformed into another form of energy, such as light or heat, through the use of electrical circuits and devices. The electrical energy is conducted through wires, which are highly conductive, minimizing energy losses as waste heat. Additionally, modern electrical devices are designed to be highly efficient, converting most of the electrical energy they receive into the desired form of energy, and producing minimal waste heat.
On the other hand, in the transfer of energy from one body to another through conduction, some energy is lost as waste heat due to friction between the two bodies. Similarly, in energy transfer through convection, energy is lost as waste heat due to the mixing of warm and cool fluids. In energy transfer through radiation, some energy is lost as waste heat due to absorption and reflection by the surrounding materials.
Here you can learn more about energy transfer
https://brainly.com/question/19516242#
#SPJ11
The light turns green, the driver steps on the
gas, and the car accelerates from rest.
This situation can best be described as a transformation of
Kinetic energy into Chemical energy
Chemical energy into Dissipated energy (eg. , heat)
Chemical energy into Kinetic energy
Dissipated energy (eg. Heat) into Kinetic energy
Potential energy into Kinetic energy
The light turns green, the driver steps on the gas, and the car accelerates from rest. This situation can best be described as a transformation of e) Potential energy into Kinetic energy.
Definition of Potential EnergyPotential energy material is included in the discussion of the chapter on mechanical energy. Not only potential energy, this chapter also explains about kinetic energy.
Mechanical energy itself has a definition as energy based on the nature of its motion.
the meaning of potential energy is the energy possessed by an object because of its position relative to a reference. For example, we can see an example of it on a rock that is on the side of the road. The stone has potential energy. When given a force, the stone will fall. Stones on the side of the road with stones placed on the floor of course have different potential energy.
When compared between potential energy and kinetic energy, it is clear that the two have fundamental differences. Kinetic energy is defined as the energy an object has because of its motion.
Learn more about potential energy at https://brainly.com/question/11543083
#SPJ4
You observe a ball that moves (33.6 ‡ 0.2) cm in (11.49 ‡ 0.02) s. What is the observed speed of the ball (best estimate and most probable uncertainty)? (speed =distance / time)• (2.92 + 0.01) cm/s• (1.62 ÷ 0.01) cm/s• (2.92 ‡ 0.02) cm/s• (1.619 ÷ 0.008) cm/s(1.739 + 0.005) cm/s
The formula for speed is speed = distance/time. Using the given values, we can calculate the observed speed of the ball as follows:
distance = 33.6 ‡ 0.2 cm
time = 11.49 ‡ 0.02 s
speed = distance / time = (33.6 ‡ 0.2) cm / (11.49 ‡ 0.02) s
Using the most probable uncertainty (±0.5 times the smallest uncertainty), we can estimate the uncertainty in the speed calculation as follows:
uncertainty in distance = 0.2 cm
uncertainty in time = 0.02 s
uncertainty in speed = (uncertainty in distance) / (time) ± 0.5 * (smallest uncertainty)
= (0.2) / (11.49) ± 0.5 * (0.02)
= 0.01744 ± 0.01 cm/s
Therefore, the observed speed of the ball is (2.92 ± 0.02) cm/s.
To Learn More About speed click
https://brainly.com/question/28224010
#SPJ4
When there's a wind blowing does a round trip by plane take more time less time or the same time?
Headwinds during takeoff help to boost lift, requiring a record low speed as well as a shorter airfield distance for the aircraft to take flight. Similar benefits can be found when landing towards the wind, including a smaller landing area and slower ground speed.
Explain the effects of Wind on Aircraft?It should come as no surprise that the wind is one of the main factors influencing an aircraft's movements while in flight.
Given that an aircraft rarely flies in the exact same directions as the wind, it is required for an aircraft to continuously correct for both wind patterns as well as wind speed in order to keep its desired course while in flight.Even though an airplane has its own method of propulsion, the wind's strength and direction can considerably affect how far an aircraft travels while in flight; this is known as the "wind effect." Therefore, its forward motion or force of the airplane through into the air and indeed the natural flow of that air decide whether or not the aircraft stays on to its intended flight route (wind).Thus, a round-trip flight takes longer and takes less time when the wind is blowing.
To know more about the effects of Wind on Aircraft, here
https://brainly.com/question/17695341
#SPJ4
are the two cars traveling in the same direction when they pass each other?
No, the two cars are not traveling in the same direction when they pass each other as one is moving upwards while the other is moving downwards.
When two cars pass each other, they are traveling in opposite directions. Because the cars are moving at various speeds, they will cover varying distances. Despite travelling at the same pace and in the opposite directions, the two cars have different velocity. The difference between the individual speeds of two moving objects determines their relative speed. The total of the individual speeds of two objects moving in opposition determines their relative speed. However, stopping distances vary based on the weather and your speed of travel. The stopping distance will grow as you drive faster and the road becomes more slick.
To learn more about velocity click here https://brainly.com/question/18084516
#SPJ4
complete question: The cars travel on the parallel lanes of two-lane road. The cars position is represented by the position versus time graph shown in the figure.
Are the two cars traveling in the same direction when they pass each other?
Let mp be the mass of a proton, mn the mass of a neutron, M1 is the mass of a 2010Ne nucleus & M2 is the mass of a 4020Ca nucleus. Then
Once you have the masses of both nuclei, you can compare them or perform any other operations you need to with their masses.
relation between the atomic mass and nucleus ?
The atomic mass of a nucleus is equal to the sum of the masses of its protons and neutrons. To calculate the mass of a nucleus, you can use the following formula:
mass of nucleus = number of protons * mass of proton + number of neutrons * mass of neutron
For the 2010Ne nucleus, you would need to find the number of protons and neutrons in a 2010Ne atom, then use the above formula to find its mass.
Similarly, for the 4020Ca nucleus, you would need to find the number of protons and neutrons in a 4020Ca atom, then use the above formula to find its mass.
Once you have the masses of both nuclei, you can compare them or perform any other operations you need to with their masses.
To learn more about nuclei follow the given link: https://brainly.com/question/28238338
#SPJ4
After the block is released from x = A, it will O remain at rest. O move to the left until it reaches equilibrium and stop there. O move to the left until it reaches x = -A and stop there. O move to the left until it reaches x = -A and then begin to move to the right.
After the block is released from x = A, it will move to the left until it reaches x = -A and then begin to move to the right. This motion will continue back and forth until the block comes to rest due to frictional forces or other damping mechanisms.
This refers to a block that is initially released from a position x = A and is subject to a restoring force. The restoring force is proportional to the displacement from the equilibrium position and acts in the opposite direction. When the block is released from x = A, it will experience a net force towards the left and will start moving to the left until it reaches the equilibrium position x = -A. At this point, the net force acting on the block will be zero and it will come to rest. But as the block is displaced slightly to the left or right of the equilibrium position, it will experience a net force in the opposite direction and start moving back towards x = -A. This motion will continue back and forth until the block comes to rest due to frictional forces or other damping mechanisms.
Learn more about restoring force here:
https://brainly.com/question/12454027
#SPJ4
one of the strings on a musical instrument is 0.500 m in length and has linear mass density 1.17×10−3kg/m . the second harmonic on this string has frequency 512 hz . what is the tension in the string?
The strings on a musical instrument are 0.500 m in length and have a linear mass density of 1.17×10−3kg/m. the second harmonic on this string has a frequency 512 Hz, thus the tension in the string is T = 76.7 N
The wavelength of the sound wave that the string produces in the air is λ = 1.344 m
[tex]\(d = 1.17 \times 10^{-3} \, \text{kg/m}\)[/tex]
f₂ = 512Hz
l = 0.500m
λ = l 0.500m
so,
[tex]\(v = \sqrt{\frac{T}{d}}\)[/tex]
[tex]\[T = \left(\frac{512 \times 0.5 \, \text{m}}{2}\right)^2 \times (1.17 \times 10^{-3} \, \text{kg/m})\][/tex]
Therefore, the tension in the string is T = 76.7 N
2. f₁ = 256 Hz (fundamental frequency)
v = 344 m/s
Thus,
[tex]\[λ_1 = \frac{v}{f_1}[/tex]
=[tex]\frac{344 \, \text{m/s}}{256 \, \text{Hz}}[/tex]
Therefore, the wavelength of the sound wave that the string produces in the air is = 1.344 m.
Know more about wavelength:
https://brainly.com/question/7143261
#SPJ12
What is 13.5 C in inches?
Since 1 inch is equivalent to 2.54 centimetres, 13.5 centimetres is equal to 5.315 inches.
What is Centimeter?
The international standard unit of length is the metre, and a centimetre (cm) is a decimal fraction of the metre that is roughly comparable to 39.37 inches.
What is inch?
An inch is a unit of length or distance in numerous measurement systems, including the US Customary Units and British Imperial Units. Since one inch is equal to 112 of a foot, it is also equal to 136 of a yard. The contemporary definition states that 25.4 mm exactly equals one inch.
What is the conversion factor and formula for centimetres to inches?
Simply multiply the centimetre number by 0.39370078740157 to convert it to an equivalent amount in inches (the conversion factor).
To learn more about international standard unit, visit: https://brainly.com/question/14288881
#SPJ4
will i run down my car battery if i'm cranking the engine with the windshield wipers running unchecked?
Using windshield wipers running unchecked will drain battery.
The most common reason a car battery is draining is parasitic drain caused by a faulty electric consumer like a bad door lock switch or a trunk lock switch. It can also be caused by a broken alternator or human errors, like forgetting electric consumers on.A parasitic drain occurs when something in the vehicle continues to run even though you have turned the car off. There are some components that are always using battery power, such as the memory for the clock or radio presets.However, when an electrical problem occurs, the parasitic drain might exceed what is normal. These drains occur due to defective fuses or faulty wiring.To know more about electricity visit:
https://brainly.com/question/30079537
#SPJ4
The car was initially traveling at 15 m/s. The car slows with a negative acceleration of 4.5 m/s2. How long does it take the car to slow to a final velocity of 4.0 m/s?
A. 0.89 s
B. 2.4 s
C. 11 s
D. 60 s
Option A.To calculate the time it takes for a car with initial velocity 15 m/s to slow down to a final velocity of 4 m/s, we can use the following formula:
Δt = (vf - vi) / a
Where:
Δt is the change in time
vf is the final velocity
vi is the initial velocity
a is the acceleration (negative in this case, since the car is slowing down)
Δt = (4 - 15) / -4.5
Δt = 11 / -4.5
Δt = -2.44
Since time can't be negative, we have to take the absolute value of Δt:
Δt = |-2.44| = 2.44 s
Rounding up to the nearest hundredth, we get:
Δt = 2.44 s ≈ 2.44 s = 0.89 s
To learn more about velocity please click on below link
https://brainly.com/question/18084516
#SPJ4
Speed describes how fast an object moves. Speed is described by and time. Velocity is speed with. Velocity is described by and time.
Speed describes how fast an object moves. Speed is described by and time. Velocity is speed .Velocity is described by and time.
What is the current in the circuit?
Current is the rate at which electrons move through a specific area of an electrical circuit. Simplest definition of current is flow. An ampere, which is pronounced "amp," is the standard measurement unit for current (AM-pir).
Describe a fundamental electrical circuit.A power source, electric conductors and wires, a switch, and electrical load components like a lightbulb make up a basic electric circuit. There are two main categories of electrical circuits: parallel and series circuits. Electrical components are connected as a chain in series circuits.
What different types of circuitry are there?Close Circuit, Wide Circuit, Long Circuit, Important Structural, and Parallel Circuit are the five main types of circuits. A conductive conduit of electricity or electricity has been created for each group.
To know more about electrical circuit visit:
https://brainly.com/question/29032441
#SPJ4
Does the hotter block have more energy inside? Look closely! Yes/No
Yes. Thermal energy is a type of energy that is directly related to the temperature of an object. When an object is heated, its atoms and molecules begin to move faster, which increases its temperature and its thermal energy.
Conversely, when an object is cooled, its atoms and molecules slow down, reducing its temperature and its thermal energy.
The total energy contained within an object is the sum of its internal energy, which includes thermal energy, and any other forms of energy it may contain, such as kinetic energy or potential energy. When two objects are at different temperatures, the one with the higher temperature will have more thermal energy and therefore more total energy than the one with the lower temperature.
It's important to note that thermal energy is a relative quantity. The amount of thermal energy contained in an object depends on the temperature difference between that object and some reference temperature, typically a temperature of absolute zero, which is the theoretical temperature at which all matter would have no thermal energy.
To learn more about Thermal energy please click on below link.
https://brainly.com/question/3022807
#SPJ4
a hotel elevator ascends 160 m with a maximum speed of 5.87 m/s. its acceleration and deceleration both have a magnitude of 0.84 m/s2. how far does the elevator move while accelerating to full speed from the rest?
By using the equation of motion, the distance of elevator move while accelerating with full speed would be 20.51 m
The third equation of motion is written as follows: v2 - u2 = 2as. In physics, an equation of motion is defined as a mathematical expression that describes the behavior of a physical system in terms of how it changes over the course of time. Utilizing any one of the three equations of motion, it is feasible to compute values for variables such as velocity (both starting and end), displacement(s), time(t), and acceleration (a).
During the phase of acceleration, the elevator will travel a distance that may be calculated as follows:
v² – u² = 2as
Where:
v = the final speed
u = initial speed
a = acceleration
s = displacement
In this case, we are given that:
The elevator’s maximum speed (v) = 5.87 m/s
Initial speed, u = 0
The magnitude of acceleration (a) = 0.84 m/s²
Thus, the elevator moves at a maximum distance of:
s = (v²-u²)/2a
s = ((5.87m/s)² – (0)²) / (2 x 0.84 m/s²)
s = 20.51 m
To learn more about equation of motion, click here:
https://brainly.com/question/30459518
#SPJ4
suppose you could take out all the electrons and hold them in one hand, while in the other hand you hold what is left of the original sphere. if you hold your hands 1.70 m apart at arm's length, what force will each of them feel?
Each of the hands will feel a force of about 7.175 × 10¹⁸ N
The formula to calculate total force experienced by the nucleus ?
The force felt by the electrons and the nucleus would be due to the electromagnetic force between the charged particles. The force experienced by each of them can be calculated using Coulomb's law, which states that the force between two charged particles is proportional to the product of their charges and inversely proportional to the square of the distance between them.
To begin with, what remains on the other hand are protons and neutrons; only protons are charged and have the same charge as electrons but with a positive value, so we can easily deduce that the total charge of what remains of the sphere is =
+4.8 x 10⁴ coulombs.
So let's pose ce to be the total charge of the electrons & cp the total charge of the protons, d the distance the separates them. And F the force between them.
ce = -4.8 x 10⁴ coulombs
cp = +4.8 x 10⁴ coulombs
d = 1.70m
So let's apply the formula:
F = k x I ce x cp I /d² K = 9 x 10⁹
F = 9 x 10⁹ x I -4.8 x 10⁴ x +4.8 x 10⁴ I / 1.70²
= [tex]$\frac{9\cdot 10^9\cdot 4.8^2\cdot 10^8}{1.70^2}[/tex]
= 7.175087× 10¹⁸ N
Each of them will feel a force of about 7.175 × 10¹⁸ N
To learn more about force follow the given link:
https://brainly.com/question/27872232
#SPJ4
According to coulomb's law, doubling the distance between two charges will change the force by a factor of:.
According to coulomb's law, doubling the distance between two charges will change the force by a factor of 1/4.
Definition of Coulomb's LawCoulomb's law is a law that governs the interaction between electric charges, both like and different types of charges. As you know that there are positive and negative electric charges.
Who Discovered Coulomb's LawCoulomb's law was discovered by a scientist from France, namely Charles-Augustin de Coulomb in 1785. Before discovering the law of the interaction between electric charges, Coulomb had done a lot of research, starting from making compasses, making torsion scales, making works on electricity and magnetism, and much more. other.
Several of Coulomb's works on electricity and magnetism were used as the basis for research and discoveries by later scientists, such as Hans Christian Oersted, Marie Ampere, to Henry Cavendish.
Learn more about Coulomb law at https://brainly.com/question/30465385.
#SPJ4
What does the presence of a polar covalent bond show about the electronegativities of its two atoms?
The presence of a polar covalent bond show that the electronegativities of the two atoms are not equal.
What does polar covalent bond means?
A polar covalent bond is a type of chemical bond between two atoms in which the electrons are unequally shared between the two atoms, resulting in a molecule with an electric dipole moment. The atoms in a polar covalent bond have different electronegativities and the electron cloud is distorted, creating a partial positive charge on one atom and a partial negative charge on the other.
The presence of a polar covalent bond indicates that the two atoms have different electronegativities. One atom will have a higher electronegativity than the other, meaning that the electron pair is pulled more towards it and forms a slightly negative charge. The other atom will have a lower electronegativity, resulting in a slightly positive charge.
Therefore, it show that the electronegativities of the two atoms are not equal.
To learn more about polar covalent bond from the link
https://brainly.com/question/10777799
#SPJ4
if a satellite is orbiting earth at constant speed, select one: a. its orbit is unbound. b. its orbit is an elongated ellipse. c. its orbit is circular. d. it is just under its escape velocity.
Answer:
The ball was thrown from a height that can be calculated using the kinematic equation:
h = vi * t + 0.5 * a * t^2
Where:
h = height from which the ball was thrown
vi = initial vertical velocity = 0 m/s (thrown horizontally)
a = acceleration due to gravity = -9.8 m/s^2
t = time taken to hit the ground
We can use the horizontal distance traveled, d = 36.31 m, to calculate the time:
d = vi * t
t = d / vi
t = 36.31 / 29.59
Now we can use t to find h:
h = vi * t + 0.5 * a * t^2
h = 0 * t + 0.5 * (-9.8) * t^2
h = 4.8 * t^2
h = 4.8 * (36.31 / 29.59)^2
h = 10.76 m
So, the ball was thrown from a height of 10.76 m.
Explanation: