A current of 4.03 A is passed through a Cu(NO3)2 solution. How long, in hours, would this current have to be applied to plate out 8.10 g of copper

To determine the empirical formula of the unknown compound, we need to calculate the number of moles of carbon, hydrogen, and oxygen present in the sample.

First, let's calculate the number of moles of CO2 produced:

n(CO2) = mass/molar mass = 6.247 g / 44.01 g/mol = 0.1419 mol CO2

Next, let's calculate the number of moles of H2O produced:

n(H2O) = mass/molar mass = 1.769 g / 18.02 g/mol = 0.0982 mol H2O

The number of moles of carbon in the sample is equal to the number of moles of CO2 produced, since each molecule of CO2 contains one atom of carbon:

n(C) = n(CO2) = 0.1419 mol.

To know more about molecule visit :

https://brainly.com/question/19922822

#SPJ11

A typical molecule has energy spacings between allowed levels that increase as follows: rotational < vibrational < electronic.

Rotational energy levels arise from the molecule's ability to rotate around its center of mass, and they are closely spaced. Vibrational energy levels arise from the molecule's ability to vibrate, and they are more widely spaced than rotational levels.

Electronic energy levels arise from changes in the electronic configuration of the molecule, and they are widely spaced compared to rotational and vibrational levels.

To know more about energy levels of molecules, click here:-

https://brainly.com/question/15059755

#SPJ11

The tanks must be kept at a pressure of greater than 5.1 atm and temperature greater than -56.7°C, because liquid carbon dioxide cannot exist below that pressure and temperature.

Gaseous carbon dioxide can liquefy when under pressure as long as its temperature is below the critical point, which is 31 °C (87,8 °F). A colorless fluid with a density close to that of water is created when the material is squeezed and cooled below the critical point.

Dry ice, which is solid carbon dioxide, sublimes at one bar, or roughly one atmosphere, changing from solid to gas instantly. If you want liquid carbon dioxide, you need a pair of temperatures and pressures, such as 40.0 °C and 20 bar.

Only under extremely high pressures and temperatures, such as those present in the centers of stars and planets, does carbon exist in its liquid form. As a result, producing liquid samples in a lab setting under equilibrium circumstances is quite challenging.

Learn more about carbon dioxide and liquification:

https://brainly.com/question/30581860

#SPJ4

The oxidation number of arsenic (As) in the compound H3AsO3 is +3. This is because the oxidation number of hydrogen (H) is always +1, and the oxidation number of oxygen (O) is always -2. Therefore, we can calculate the oxidation number of arsenic (As) by adding up the oxidation numbers of all the atoms in the compound and setting it equal to zero (since the compound is neutral). In general, some guidelines to determine oxidation numbers are:

The oxidation number of an element in its elemental form is 0.

The oxidation number of a monatomic ion is equal to its charge.

In a compound, the sum of the oxidation numbers of all atoms is equal to the charge of the compound.

Fluorine always has an oxidation number of -1 in compounds.

Oxygen usually has an oxidation number of -2 in compounds, except in peroxides (such as H2O2) where its oxidation number is -1.

Hydrogen usually has an oxidation number of +1 in compounds, except in metal hydrides (such as NaH) where its oxidation number is -1.

In this case, we have:
(+1 x 3) + (x) + (-2 x 3) = 0
Solving for x, we get:
x = +3
So the oxidation number of arsenic (As) in H3AsO3 is +3.
In the compound H3AsO3, the oxidation number of arsenic (As) is +3. Here's the breakdown: hydrogen (H) has an oxidation number of +1, and oxygen (O) has an oxidation number of -2. Using the formula H3AsO3, we can calculate the oxidation number of As as follows:
3(+1) + As + 3(-2) = 0
3 - 6 + As = 0
As = +3

So, the oxidation number of arsenic in H3AsO3 is +3.

To know more about oxidation number visit:

https://brainly.com/question/29257381

#SPJ11

glass molucules are randomly arranged so either B or D

To answer this question, we need to use the Henderson-Hasselbalch equation: pH = pKa + log([A-]/[HA])

where pH is the desired pH (4.94), pKa is the dissociation constant of acetic acid (4.76), [A-] is the concentration of acetate ions (which we want to calculate), and [HA] is the concentration of acetic acid (0.250 M).

First, we need to calculate the ratio [A-]/[HA] that corresponds to a pH of 4.94:

4.94 = 4.76 + log([A-]/[0.250])
0.18 = log([A-]/[0.250])
10^0.18 = [A-]/[0.250]
1.55 = [A-]/[0.250]

This means that we need to add enough sodium acetate to bring the concentration of acetate ions to 1.55 times the concentration of acetic acid in the solution. Since sodium acetate completely dissociates in water to produce acetate ions, we can use the following equation to calculate the amount of sodium acetate we need to add:

moles of sodium acetate = (1.55 x 0.250 M x 0.500 L) / 1

where 1 is the number of acetate ions produced per mole of sodium acetate. Solving for moles of sodium acetate gives:

moles of sodium acetate = 0.0975 moles

Therefore, we need to add 0.0975 moles of sodium acetate to 500.0 mL of 0.250 M acetic acid solution to produce a solution with a pH of 4.94.


Thus, you need to add approximately 0.198 moles of sodium acetate to the 500.0 mL of 0.250 M acetic acid solution to produce a solution with a pH of 4.94.

Learn more about acetic acid here : brainly.com/question/15202177

#SPJ11

The balanced chemical equation for the reaction between NaOH and HCl is:

NaOH(aq) + HCl(aq) → NaCl(aq) + H2O(l)

Since NaOH is a strong base and HCl is a strong acid, the reaction goes to completion and all the NaOH will react with the HCl. The pH of the solution will depend on the amount of excess HCl present in the solution after the reaction is complete.

To find the volume of HCl needed to reach a pH of 11.50, we can use the following steps:

Write the equation for the reaction between HCl and water:

HCl + H2O ⇌ H3O+ + Cl-

Calculate the concentration of H3O+ ions needed to reach a pH of 11.50:

pH = -log[H3O+]

11.50 = -log[H3O+]

[H3O+] = 3.16 × 10^-12 M

Calculate the amount of HCl needed to produce this concentration of H3O+ ions:

[HCl] = [H3O+]

[HCl] = 3.16 × 10^-12 M

Calculate the moles of HCl needed to react with the NaOH:

moles of NaOH = concentration of NaOH × volume of NaOH used

moles of NaOH = 0.324 M × 0.02500 L = 0.00810 moles

moles of HCl needed = moles of NaOH

moles of HCl needed = 0.00810 moles

Calculate the volume of 0.250 M HCl needed to provide the moles of HCl calculated in step 4:

volume of HCl = moles of HCl / concentration of HCl

volume of HCl = 0.00810 moles / 0.250 M = 0.0324 L = 32.4 mL

Therefore, the volume of HCl needed to reach a pH of 11.50 is 32.4 mL. However, this calculation assumes that all of the HCl will react with the NaOH and that the pH measurement is accurate. In practice, it may be necessary to add slightly more HCl to ensure that the pH reaches the desired value.

To know more about moles please visit:

https://brainly.com/question/31597231

#SPJ11

The period 3 element described by the given successive ionization energies is Mg (Magnesium). The correct option to this question is B.

The key to determining the correct element is to look for a significant increase in ionization energy, which typically occurs after the removal of a core electron.

In this case, the notable jump in ionization energy occurs between IE5 (6270 kJ/mol) and IE6 (22,200 kJ/mol). This indicates that the element has 5 valence electrons in its outermost shell.

Since Magnesium (Mg) is in group 2, it has 2 valence electrons. When considering the period 3 elements, Magnesium is the 5th element from the left. Therefore, after losing its 2 valence electrons, Magnesium will lose 3 core electrons to reach a total of 5 lost electrons, which corresponds to the significant increase in ionization energy.

Based on the analysis of the given ionization energies and the jump in values, the correct answer is B. Mg (Magnesium) as it is the period 3 element that aligns with the provided information.

For more information on ionization energy kindly visit to

https://brainly.com/question/28385102

#SPJ11

Buffering capacity is a measure of the ability of a solution to resist changes in pH upon addition of an acid or a base. It is a crucial parameter in many chemical and biological systems, including biological fluids and chemical reactions.

In discussions questions 9 and 12, two buffering capacities were obtained for different solutions, which theoretically should be identical. The reason for this is because the buffering capacity of a solution is determined by the concentration of the buffering agent, which is the substance responsible for maintaining the pH of the solution.

In both discussions questions 9 and 12, the buffering agent used was the same, and the concentration of the buffering agent was also the same. Thus, theoretically, the buffering capacities obtained from these two discussions should be identical. This is because the concentration of the buffering agent is the only factor that affects the buffering capacity of a solution. Therefore, if the concentration is kept constant, the buffering capacity should also be constant.

However, in practice, there may be slight variations in the buffering capacities obtained from different experiments due to experimental errors or variations in the conditions of the experiment. These variations may result in slight differences in the buffering capacities obtained from discussions questions 9 and 12. Nevertheless, the theoretical prediction of identical buffering capacities is valid and should hold true in most cases, assuming that all other factors are held constant.

To know more about Buffering capacity visit:

https://brainly.com/question/24188850

#SPJ11

The Lewis structure of SiH4 is a silicon atom in the center with four single bonds to four surrounding hydrogen atoms. No lone pairs of electrons are present on any of the atoms.

To draw the Lewis structure for SiH4, follow these steps:
1. Start with the silicon atom in the center and draw four single bonds to the hydrogen atoms. Each hydrogen atom should have two electrons around it, one from the bond and one as a lone pair.
Si:
   H    H
   |    |
   H — Si — H
   |    |
   H    H
2. Count the number of electrons around each atom. Silicon has eight valence electrons (group 4A) and each hydrogen has one valence electron. This gives a total of eight + (4 x 1) = 12 electrons.
3. Subtract the electrons used in the bonds from the total to get the number of lone pairs. In this case, all the electrons are used in the bonds, so there are no lone pairs.
4. Check that each atom has a full valence shell. Each hydrogen has two electrons (a full shell) and silicon has eight (also a full shell).
Therefore, the Lewis structure for SiH4 is:
   H    H
   |    |
   H — Si — H
   |    |
   H    H
with all hydrogen atoms included.

5. Each hydrogen atom has one valence electron, and as they are sharing one electron with the silicon atom through the single bond, there will be no lone pairs of electrons on the hydrogen atoms.

Learn more about Lewis structure here

https://brainly.com/question/30227557

#SPJ11

Answer:

6.7 to 7 let's just say neutral

Explanation:

considering the amount of water added to the acid..

it's very diluted

The pH of the solution if 5 ml of 6M HCL is added to 95 ml of pure water is 0.52.

To find the pH of the solution, we need to use the formula: pH = -log[H+].

First, we need to calculate the concentration of H+ ions in the solution.

We know that 5 ml of 6M HCL is added to 95 ml of pure water, so we can calculate the moles of HCl added:

5 ml x 6 mol/L = 30 mmol HCl

Since we added 30 mmol HCl to a total volume of 100 mL, the concentration of H+ ions in the solution is:

[H+] = 30 mmol / 100 mL = 0.3 mol/L

Now, we can plug this concentration into the pH formula:

pH = -log(0.3) = 0.52

Therefore, the pH of the solution is 0.52.

To know more about pH  click on below link :

https://brainly.com/question/23110826#

#SPJ11

In the case of KCl and CaO, CaO has a stronger ionic bond due to the greater electronegativity difference, resulting in a higher melting point.

Both KCl and CaO have ionic bonds, which occur when a metal donates electrons to a nonmetal to form a stable compound. The strength of the bond is determined by the difference in electronegativity between the two elements. The greater the difference, the stronger the bond, and the higher the melting point.

In the case of KCl, potassium (K) has a lower electronegativity than chlorine (Cl), which means it donates its valence electron to chlorine, forming a positive K+ ion and a negative Cl- ion. This creates a strong ionic bond between the two ions. However, CaO has a greater electronegativity difference between calcium (Ca) and oxygen (O), resulting in an even stronger ionic bond between the two ions.

Therefore, CaO has a higher melting point than KCl due to the stronger ionic bond between its ions. This means that more energy is required to break the bonds holding the ions together, causing CaO to have a higher melting point.

In conclusion, the melting point of ionic compounds is determined by the strength of their bonds, which is based on the electronegativity difference between the two elements forming the compound.

To know more about ionic bond, refer to the link below:

https://brainly.com/question/7966949#

#SPJ11

The dipole moment of a molecule is determined by the distribution of its electrons and the geometry of its bonds.

In the case of SO2, the molecule has a bent shape with two polar bonds, which results in a dipole moment of 1.63 D. On the other hand, CO2 is linear and has two polar bonds that are equal and in opposite directions, which cancels out their dipole moments, resulting in a net dipole moment of 0 D.

It is important to note that the dipole moment of a molecule can be induced by dissolving it in a polar solvent, which alters the electron distribution and results in a dipole moment. In the case of SO2, it must be dissolved in a polar solvent to induce a dipole moment. However, CO2 must be dissolved in a nonpolar solvent to induce a dipole moment of 0 D.

In summary, the dipole moment of SO2 is 1.63 D due to its bent shape and polar bonds, while CO2 has a dipole moment of 0 D due to its linear shape and equal and opposite polar bonds. Additionally, the dipole moment of SO2 can be induced by dissolving it in a polar solvent, whereas CO2 must be dissolved in a nonpolar solvent to induce a dipole moment of 0 D.

Learn more about dipole moment here:

https://brainly.com/question/14140953

#SPJ11

In particle accelerators, elements are synthesized by bombarding relatively heavy atoms with high-energy particles. This process is known as nuclear reaction or nuclear transmutation. The reaction given in the question is an example of nuclear transmutation. The reaction involves the collision of a 40-18Argon atom with a high-energy particle to produce a new element, 43-19Potassium and a neutron. The neutron is represented by 1-0n.

During the process of nuclear transmutation, the atomic nucleus of one element is converted into another by the addition or removal of protons and neutrons. In the given reaction, the atomic number of Argon is 18, and the atomic number of Potassium is 19. Therefore, the proton number of the product atom is one more than the reactant atom.

The energy required for nuclear transmutation is very high, and the process requires particle accelerators. The particle accelerator accelerates the particle to high velocities, and when it collides with the target nucleus, the energy is transferred, and the nuclear reaction occurs. Nuclear transmutation is an essential process used in the production of radioactive isotopes used in medical applications, scientific research, and industrial applications.

To know more about nuclear reaction  click this link-

brainly.com/question/1652666

#SPJ11

The atomic mass of the element M in the ionic compound MFx is approximately 174.808 g/mol.

To determine the atomic mass of the element M in the ionic compound MFx, we can use the information about the formula mass and the mass percent of fluorine.

First, we can calculate the mass of fluorine in one mole of MFx:

mass of fluorine = formula mass of MFx × mass percent of fluorine

mass of fluorine = 232 g/mol × 24.6% = 57.192 g/mol

Next, we can use the periodic table to find the atomic mass of fluorine, which is 18.998 g/mol.

Now we can set up an equation to relate the mass of fluorine to the mass of M:

mass of M = formula mass of MFx - mass of fluorine

mass of M = 232 g/mol - 57.192 g/mol

mass of M = 174.808 g/mol

For more question on atomic mass click on

https://brainly.com/question/30390726

#SPJ11

The pH of the buffer is 9.25, and after adding 6.21 g of HCl, the pH will decrease to 9.09.

To calculate the pH of the buffer, we need to use the Henderson-Hasselbalch equation: pH = pKa + log([base]/[acid]), where pKa is the dissociation constant of the weak acid/base pair, [base] is the concentration of the weak base (NH3), and [acid] is the concentration of the weak acid (NH4Cl).

The pKa of the NH3/NH4+ pair is 9.25, which we can use as the pH of the buffer since the concentrations are equal. Thus, we have:

pH = 9.25 + log([NH3]/[NH4+])

pH = 9.25 + log(40.0 g NH3 / 17.03 g NH4+)

pH = 9.25 + log(2.35)

pH = 9.25 + 0.37

pH = 9.62

After adding 6.21 g of HCl, we need to recalculate the concentrations of NH3 and NH4+. Assuming the volume of the buffer remains constant, we can use the mass balance equation:

mass NH3 + mass NH4+ + mass HCl = total mass

40.0 g + 40.0 g + 6.21 g = 86.21 g

From this, we can calculate the new concentrations of NH3 and NH4+:

mol NH3 = 40.0 g / 17.03 g/mol = 2.35 mol

mol NH4+ = 40.0 g / 53.49 g/mol = 0.75 mol

mol HCl = 6.21 g / 36.46 g/mol = 0.17 mol

mol NH3 = 2.35 - 0.17 = 2.18 mol

mol NH4+ = 0.75 + 0.17 = 0.92 mol

Now, we can use the Henderson-Hasselbalch equation again to calculate the new pH:

pH = 9.25 + log(2.18/0.92)

pH = 9.09

To know more about pH of the buffer, refer here:

https://brainly.com/question/30295322#

#SPJ11

The reaction rate will increase by a factor of 4 when the concentrations of reactants [M] and [N] are each doubled from 1 x 10^-3 M to 2 x 10^-3 M.

The rate of a chemical reaction is often dependent on the concentrations of the reactants. The relationship between the rate of a reaction and the concentrations of the reactants can be described by the rate law, which is determined experimentally.

If the reaction rate follows the following rate law:

rate = k[M]^a[N]^b

where k is the rate constant, [M] and [N] are the concentrations of reactants M and N, respectively, and a and b are the reaction orders with respect to M and N, respectively.

Assuming the reaction orders are both 1, the rate law becomes:

rate = k[M][N]

When [M] and [N] are both 1 x 10^-3 M, the rate of the reaction is:

rate1 = k(1 x 10^-3 M)(1 x 10^-3 M) = k(1 x 10^-6 M^2/s)

When [M] and [N] are both 2 x 10^-3 M, the rate of the reaction is:

rate2 = k(2 x 10^-3 M)(2 x 10^-3 M) = k(4 x 10^-6 M^2/s)

The ratio of the two rates is:

rate2/rate1 = (k(4 x 10^-6 M^2/s))/(k(1 x 10^-6 M^2/s)) = 4

to know more about reaction rate refer here:

https://brainly.com/question/30546888#

#SPJ11

The first step in this problem is to write the chemical equation for the dissociation of HN3 in water:

HN3 + H2O ⇌ H3O+ + N3-

The equilibrium constant expression for this reaction is:

Ka = [H3O+][N3-] / [HN3]

Since the solution is 0.25 M in HN3, the initial concentration of HN3 is also 0.25 M. At equilibrium, some of the HN3 will have dissociated into H3O+ and N3- ions, but we don't know how much. Let's assume that x moles of HN3 have dissociated, so the equilibrium concentrations of the species are:

[HN3] = 0.25 M - x

[H3O+] = x

[N3-] = x

Substituting these values into the equilibrium constant expression and using the value of Ka for HN3 at 25°C, which is 1.0 × 10^-5, we get:

1.0 × 10^-5 = (x)(x) / (0.25 - x)

Solving for x gives:

x = 5.0 × 10^-4 M

This is the concentration of H3O+ ions in the solution at equilibrium, which is also the pH of the solution. To calculate the pH, we use the relation:

pH = -log[H3O+]

Substituting the value of [H3O+] gives:

pH = -log(5.0 × 10^-4) = 3.30

Therefore, the pH of the 0.25 M aqueous solution of HN3 is 3.30 at 25°C.

To know more about aqueous please visit:

https://brainly.com/question/13608038

#SPJ11

To obtain a mixture of 210 liters containing 30% acid, the chemist needs to use 42 liters of the 20% acid solution, 84 liters of the 40% acid solution, and 84 liters of the 60% acid solution.

To solve this problem, we can use the following system of equations:

x + y + z = 210 (1) (total volume of mixture)

0.2x + 0.4y + 0.6z = 0.3(210) (2) (total amount of acid in the mixture)

z = 3y (3) (given that 3 times as much of the 60% solution is used as the 40% solution)

We can solve this system of equations using substitution or elimination. Using substitution, we can solve for z in equation (3), and substitute into equation (1) to solve for y, and then substitute both values into equation (2) to solve for x.

Substituting z = 3y from equation (3) into equation (1), we get:

x + y + 3y = 210

x + 4y = 210

Substituting z = 3y from equation (3) into equation (2), we get:

0.2x + 0.4y + 0.6(3y) = 0.3(210)

0.2x + 0.4y + 1.8y = 63

0.2x + 2.2y = 63

Solving for x in terms of y from the first equation, we get:

x = 210 - 4y

Substituting into the second equation, we get:

0.2(210 - 4y) + 2.2y = 63

42 - 0.8y + 2.2y = 63

1.4y = 21

y = 15

Substituting y = 15 into the first equation, we get:

x + 4(15) = 210

x = 150

Substituting y = 15 and z = 3y = 45 into the original system of equations, we can check that all three equations are satisfied.

Hence, The chemist needs to prepare 210 liters of a mixture that contains 30% acid. To make this mixture, the chemist will need to use 42 liters of a solution that has 20% acid, 84 liters of a solution that has 40% acid, and 84 liters of a solution that has 60% acid.

To know more about mixture, refer here:

https://brainly.com/question/25252629#

#SPJ11

The chemical formula of the compound is RuCO₃.

To determine the chemical formula of the compound, we need to find the number of atoms of each element in the compound. We are given the mass of carbon and oxygen in the compound, so we can calculate the mass of ruthenium:

mass of ruthenium = total mass - mass of carbon - mass of oxygen

mass of ruthenium = 6.000 g - 1.352 g - 1.796 g

mass of ruthenium = 2.852 g

Next, we can calculate the moles of each element in the compound:

moles of carbon = 1.352 g / 12.01 g/mol = 0.1126 mol

moles of oxygen = 1.796 g / 16.00 g/mol = 0.1123 mol

moles of ruthenium = 2.852 g / 101.07 g/mol = 0.0282 mol

The ratios of these moles can give us the empirical formula of the compound. Dividing each mole by the smallest value, which is 0.0282 mol, we get:

carbon: 0.1126 / 0.0282 ≈ 4

oxygen: 0.1123 / 0.0282 ≈ 4

ruthenium: 0.0282 / 0.0282 = 1

Therefore, the empirical formula of the compound is RuCO₄. However, the given formula mass (molar mass) of the compound is approximately 639 g/mol.

The formula mass of the empirical formula (RuCO₄) is 164 g/mol. To obtain a formula mass of approximately 639 g/mol, we need to multiply the empirical formula by 4:

(RuCO₄)₄ = Ru₄C₄O₁₆ = RuCO₃

To know more about chemical formula, refer here:

https://brainly.com/question/29031056#

#SPJ11

The concentration of the new dilution is 52.08 PFU/mL.

To calculate the concentration of the new dilution, use the formula:
Concentration = (PFU/mL) x (Volume of original solution / Total volume)

Calculating the total volume of the new dilution:
Total volume = Volume of original solution + Volume of diluent
Total volume = 5 mL + 19.0 mL
Total volume = 24.0 mL

Substituting the values:
Concentration = (250 PFU/mL) x (5 mL / 24.0 mL)
Concentration = (250 PFU/mL) x (0.2083)
Concentration = 52.08 PFU/mL

As a result, the new dilution had a concentration of 52.08 PFU/mL.

To learn more about concentration visit:

https://brainly.com/question/17206790

#SPJ11

111.40 g of KCl[tex]O_3[/tex] would be required to produce 49.52 liters of oxygen gas measured at 127 degrees Celsius and 860 torr.

What is Weight?

Weight is the measure of the gravitational force acting on an object. It is a vector quantity, which means it has both magnitude and direction. The weight of an object can be calculated by multiplying its mass by the acceleration due to gravity (g).

Using the ideal gas law, the number of moles of oxygen gas produced is:

n = PV/RT = (1.13 atm) x (49.52 L) / [(0.08206 L.atm/mol.K) x (400.15 K)] = 1.37 mol

From the balanced chemical equation for the decomposition of potassium chlorate (2KCl[tex]O_3[/tex] → 2KCl + 3[tex]O_2[/tex]), we know that 2 moles of KCl[tex]O_3[/tex] produce 3 moles of [tex]O_2[/tex]. Therefore, the number of moles of KCl[tex]O_3[/tex]required to produce 1.37 moles of O2 is:

n(KCl[tex]O_3[/tex]) = (2/3) x n([tex]O_2[/tex]) = (2/3) x 1.37 mol = 0.91 mol

The molar mass of KCl[tex]O_3[/tex] is:

M(KClO3) = 39.10 g/mol + 35.45 g/mol + 3(16.00 g/mol) = 122.55 g/mol

So the weight of KCl[tex]O_3[/tex] required to produce 49.52 liters of oxygen gas at 127 degrees Celsius and 860 torr is:

mass = n x M = 0.91 mol x 122.55 g/mol = 111.40 g of KCl[tex]O_3[/tex]

To know more about Weight, visit;

https://brainly.com/question/86444

#SPJ4

The molarity of a NaCl solution containing 0.460 moles of NaCl dissolved in 347 milliliters of solution is 0.677 mol/L.

Moles of NaCl = 0.460 mol

Volume of solution = 347 mL = 347/1000 L = 0.347 L (converting mL to L)

Molar mass of NaCl = 58.44 g/mol

Molarity (M) is defined as the number of moles of solute per liter of solution. We can calculate it using the formula:

Molarity (M) = Moles of solute / Volume of solution (in L)

Plugging in the given values:

Molarity (M) = 0.460 mol / 0.347 L = 0.677 mol/L

So, the molarity of the NaCl solution is 0.677 mol/L.

To know more about Molar mass refer here:

https://brainly.com/question/22997914#

#SPJ11

6.02 grams of tin(II) fluoride contain 1.46 g of F.

To find out how many grams of tin(II) fluoride contain 1.46 g of F, we need to use the molar mass and stoichiometry of the compound.

First, let's calculate the molar mass of SnF2:
Molar mass of Sn = 118.71 g/mol
Molar mass of F = 18.998 g/mol
2 x molar mass of F = 37.996 g/mol

Molar mass of SnF2 = 118.71 g/mol + 37.996 g/mol = 156.706 g/mol

Next, we need to find the number of moles of F in 1.46 g of F:
n = m/M = 1.46 g / 18.998 g/mol = 0.07684 mol

From the chemical formula of SnF2, we know that there are 2 moles of F for every mole of SnF2. Therefore, the number of moles of SnF2 needed to contain 0.07684 mol of F is:
n = 0.07684 mol / 2 = 0.03842 mol

Finally, we can calculate the mass of SnF2 containing 0.03842 mol:
m = n x M = 0.03842 mol x 156.706 g/mol = 6.02 g

Therefore, 6.02 grams of tin(II) fluoride contain 1.46 g of F.

To know more about Tin(II) click on below link:

https://brainly.com/question/20326521#

#SPJ11

Answer:

4.58 grams of SnF2 contain 1.46 grams of F.

Explanation:

To determine the number of grams of SnF2 that contain 1.46 g of F, we first need to calculate the molar mass of SnF2.

The molar mass of SnF2 can be calculated by adding the atomic masses of tin and two fluorine atoms:

SnF2 molar mass = atomic mass of Sn + (2 x atomic mass of F)

                = 118.71 g/mol

This means that one mole of SnF2 weighs 118.71 g.

Next, we need to determine the number of moles of F in 1.46 g of F. To do this, we divide the mass of F by its molar mass:

Number of moles of F = mass of F ÷ molar mass of F

                    = 1.46 g ÷ 18.998 g/mol

                    = 0.077 mol

Finally, we can use the mole ratio between F and SnF2 to determine the number of moles of SnF2 that contain 0.077 mol of F. The ratio is 2 moles of F to 1 mole of SnF2:

Number of moles of SnF2 = 0.077 mol ÷ 2

                       = 0.0385 mol

Finally, we can calculate the mass of SnF2 containing 0.0385 mol:

Mass of SnF2 = number of moles of SnF2 x molar mass of SnF2

            = 0.0385 mol x 118.71 g/mol

            = 4.58 g

Therefore, 4.58 grams of SnF2 contain 1.46 grams of F.

To know more on molar mass refer,

https://brainly.com/question/22997914#

#spj11

84.8 mL of 0.390 M Ca(OH)2 is needed to completely neutralize 236 mL of 0.280 M HI solution.

To solve this problem, we can use the balanced chemical equation for the neutralization reaction between calcium hydroxide (Ca(OH)2) and hydroiodic acid (HI):

Ca(OH)2 + 2HI -> CaI2 + 2H2O

From this equation, we can see that each mole of Ca(OH)2 reacts with 2 moles of HI.

First, we need to calculate the number of moles of HI present in the solution:

0.280 M HI = 0.280 moles HI per liter of solution

236 mL of solution is equivalent to 0.236 L of solution

0.280 moles/L x 0.236 L = 0.06608 moles HI

Since 2 moles of HI react with 1 mole of Ca(OH)2, we need half as many moles of Ca(OH)2 to completely neutralize the HI:

0.06608 moles HI x 1/2 = 0.03304 moles Ca(OH)2

Finally, we can use the concentration of the Ca(OH)2 solution to calculate the volume needed to supply this many moles:

0.390 M Ca(OH)2 = 0.390 moles Ca(OH)2 per liter of solution

Volume of Ca(OH)2 solution needed = 0.03304 moles / 0.390 moles/L = 0.0848 L

Since the question asks for the volume in milliliters, we can convert:

0.0848 L x 1000 mL/L = 84.8 mL

To know more about neutralization reaction, please click on:

https://brainly.com/question/28970253

#SPJ11

The specific heat capacity of the metal weighing 47.3 grams is 0.52J/g°C.

The specific heat capacity i.e. the amount of thermal energy required to raise the temperature of a system by one temperature unit, of a metal can be calculated using the following expression;

Q = mc∆T

Where;

According to this question, the addition of 485J of energy increases the temperature of a 47.3 g sample of a metal from 25.6°C to 45.3°C.

485 = 47.3 × c × {45.3 - 25.6}

485 = 47.3 × c × 19.7

485 = 931.81c

c = 0.52J/g°C

Learn more about specific heat capacity at: https://brainly.com/question/29766819

#SPJ1

The food in a refrigerator is cooled by the condensation of the refrigerating fluid. This refrigerating fluid, commonly known as a refrigerant, is a compound that undergoes a cycle of evaporation and condensation to transfer heat from the inside of the refrigerator to the outside environment.

The refrigerant enters the refrigerator's evaporator coil as a low-pressure gas and evaporates as it absorbs heat from the surrounding air and the food items inside the refrigerator. The refrigerant then travels to the compressor where it is compressed to a high-pressure gas and forced through the condenser coil, which is located on the outside of the refrigerator. As the refrigerant flows through the condenser coil, it condenses back into a liquid state, releasing the heat it had absorbed during the evaporation process. This heat is then dissipated into the surrounding environment, allowing the refrigerant to start the cycle again.

The vaporization of the refrigerating fluid is also important in this process, as it absorbs heat from the food and the surrounding air in the refrigerator to cool them down. However, the ice in your nearby freezer is not directly responsible for cooling the food in your refrigerator. Rather, the freezer's purpose is to create a colder environment than the refrigerator, which helps to keep the food items in the refrigerator colder for longer periods of time.

For more such questions on evaporation

https://brainly.com/question/30657787

#SPJ11

A 19-carbon fatty acid undergoes continuous beta oxidation up till propionyl-CoA is produced. A 3-carbon structure describes the chemical known as propionyl CoA.

Beta-oxidation is a metabolic process that occurs in the mitochondria of cells and is responsible for breaking down fatty acids into acetyl-CoA molecules, which can then be used by the cell for energy production. In the case of a 19-carbon fatty acid, beta-oxidation would occur until propionyl-CoA is formed.

Propionyl-CoA is a molecule with a 3-carbon structure, and it is produced when the beta-oxidation process reaches the point where three carbons remain on the fatty acid chain. Propionyl-CoA can then be converted into succinyl-CoA through a series of enzymatic reactions in the mitochondria, which can enter the citric acid cycle and ultimately produce ATP for the cell.

However, unlike acetyl-CoA, which can enter the citric acid cycle directly, propionyl-CoA requires additional steps to be converted into succinyl-CoA. This is because the three-carbon structure of propionyl-CoA is not compatible with the enzymatic reactions of the citric acid cycle.

To learn more about beta oxidation

https://brainly.com/question/29458295

#SPJ4

The only transition metal that fits this description is nickel (Ni), which has 10 electrons in its d subshell and commonly forms a 2+ cation.

Based on the information given, the transition metal with a 2+ cation and eight electrons in its outermost d subshell is the element Iron (Fe).

Step-by-step explanation:

1. A 2+ cation means that the element has lost two electrons.
2. Since it's a transition metal, it loses electrons from the outermost s subshell first before losing any from the d subshell.
3. Iron (Fe) has an atomic number of 26, with an electron configuration of [Ar] 3d^6 4s^2.
4. When it forms a 2+ cation (Fe^2+), it loses two electrons from the 4s subshell: [Ar] 3d^6.
5. The question states that there are eight electrons in the d subshell for the 2+ cation, so we need to add two more electrons to the 3d subshell: [Ar] 3d^8.
6. This electron configuration corresponds to Iron (Fe) with two additional electrons, which indicates that the transition metal in question is Iron (Fe).

to learn more about nickel click here:

brainly.com/question/31620001

#SPJ11