a current of 0.300 a through your chest can send your hear into fibrillation, ruining the normal rhythm of heart beat and disrupting the flow of blood (and thus oxygen) to your brain. if that current persists for 3.37 min, how many conduction electrons pass through your heart?

The new resistance of the copper after doubling the length and reducing the radius will be 8 times of the original resistance.

Resistance can be defined as the property of the conductor which opposes the flow of electric current. Resistance is also defined as the ratio of the voltage applied to the electric current flowing through the circuit.

R = ρl/ A

where, R is the electric circuit,

ρ is the resistivity or specific resistance,

l is the length of the wire,

A is the cross-sectional area of the wire.

If we double the length of copper wire and reduce the radius to half. Then, the new resistance will be:

R = ρl/ A

l' = 2l

r' = r/2

A = πr²

A' = π(r/2)²

A' = πr²/4

R' = new resistance,

R' = ρ ×2l/ πr²/4

R' = 4 × ρ ×2l/ πr²

R' = 8ρl/ A

Therefore, the new resistance will be 8 times of the original resistance.

Learn more about Resistance here:

https://brainly.com/question/29427458

#SPJ1

F=-mg sin is the net force operating on a basic pendulum bob of mass m. It is a force that restores.

A simple pendulum's restoring force is directed towards the mean position when it moves in a simple harmonic motion (lowest point). Here, the force of gravity acts as the restoring force at the centre of mass of the bob.

Pendulums are employed to control clock movement because the period—the amount of time between each full oscillation—is constant. The formula for a pendulum's period T is T = 2L/g squared.

To know more about mass visit:-

https://brainly.com/question/30337818

#SPJ4

Clap-echo technique With this technique, you time how long it takes you to hear an echo after a loud clap. You clap loudly when far away from a wall, then wait for the echo.

speed equals distance/time. A sound wave will cover a greater distance in the same amount of time as it moves quicker. The speed of a sound wave would be 350 m/s if it were noticed to cover 700 meters in 2 seconds.

The distance traveled is twice as far as the gap between you and the wall (because the sound has to travel to the wall and back).

To learn more about distance here:

https://brainly.com/question/11567236

#SPJ1

By comparing the acceleration due to gravity on each planet, the highest speed would be on earth.

The acceleration due to gravity is the acceleration experienced by an object as it falls freely under the influence of Earth's gravity. The acceleration due to gravity is commonly denoted by the symbol "g" and has a value of approximately 9.8 meters per second squared (m/s^2) near the surface of the Earth.

This value can vary slightly depending on factors such as altitude, latitude, and the local geological structure.

Learn more about acceleration due to gravity:https://brainly.com/question/13860566

#SPJ1

According to the given equation(s) correctly states the principle of conservation of momentum.

A. P Ai + P Bi = P A f + P Bf

D. ΔPA + ΔPB=0

The total momentum of two or more entities working on each other in an isolated system must remain constant until an external force is applied, according to the law of conservation of momentum. Because of this, momentum cannot be created or destroyed.

The conservation of momentum, or total momentum of a system, is a general statement of physics that states that the quantity known as momentum, which characterizes motion, never changes inside an isolated collection of particles.

Visit the following to learn more about momentum conservation:

https://brainly.com/question/3920210

#SPJ4

Bumper cars A and B undergo a collision during which the momentum of the combined system is conserved. Which equation(s) correctly states the principle of conservation of momentum? Check all that apply.

A. P Ai + P Bi = P A f + P Bf

B. P Ai + P A f = P Bi + P Bf

C. ΔPA = ΔPB

D. ΔPA + ΔPB=0

The aforementioned accelerator pedal, clutch pedal, and other primary controls are all included in a car.

In conclusion, accelerators play a significant part in fostering innovation through a plan designed to guide a cohort few participants with their concepts through an intense program to develop, produce, and commercialize an alternative investment product that can grow and function in the real world.

A SHOC's innovative energy drink ACCELERATOR was created to fulfill the needs of your modern, energetic, and healthy lifestyle.

To know more about accelerator visit:

https://brainly.com/question/18084516

#SPJ4

The car travels 90m before it comes to rest.

Distance is the total movement of an object without any regard to direction. We can define distance as how much ground an object has covered despite its starting or ending point.

Velocity (v) is a vector quantity that measures displacement (or change in position, over the change in time.

Acceleration is defined as the rate of change of velocity with respect to time.

The initial velocity is 30.0 m/s.

The acceleration is [tex]-5.0\ m/s^2[/tex].

The car comes to a stop. Hence the final velocity is 0 m/s.

Using the third equation of motion,

[tex]v^2 - u^2=2as[/tex]

Substituting the values,

[tex]0^2 - 30^2=2(-5)s[/tex]

The value of s is 90m.

To know more about the acceleration, here

brainly.com/question/13860566

#SPJ4

The momentum of object 2 after the collision is 2 kg × m/s.

Momentum = mass × velocity

Before the collision, object 1 has a momentum of 5 kg * m/s, and object 2 has a momentum of -3 kg * m/s. The total momentum of the two objects before the collision can be calculated as the sum of the individual momenta:

Total momentum before collision = 5 kg × m/s + (-3 kg × m/s) = 2 kg × m/s

According to the law of conservation of momentum, the total momentum of a system remains constant unless acted upon by an external force. In this case, the two objects are colliding with each other and no external forces are present, so the total momentum of the system must remain constant.

After the collision, object 1 stops, so its velocity becomes 0, and its momentum becomes 0 kg × m/s.

Momentum of object 2 after collision = Total momentum of the system - Momentum of object 1

= 2 kg × m/s - 0 kg × m/s = 2 kg × m/s

So, the momentum of object 2 after the collision is 2 kg × m/s.

To know more about momentum here

https://brainly.com/question/30487676

#SPJ4

The electric potential at the midpoint of the rectangle is 3440 V relative to infinity.

How close to infinity is electric potential?

Whenever a charge Q is infinitely far away from another charge, the electric potential is deemed to be 0.  The resultant electric field is zero at P, the halfway between two identical charges.

To find the electric potential at the midpoint of the rectangle, we need to calculate the electric potential due to each of the four point charges, and then add them up. The electric potential at a point is given by the equation:

[tex]\mathrm{V = k \times q / r}[/tex]

where V is the electric potential, k is Coulomb's constant (1/4πε0), q is the charge, and r is the distance from the point charge to the point where we want to calculate the potential.

Let's assume that the rectangle lies in the x-y plane, with one corner at the origin. We can label the other corners as A, B, and C, where AB is parallel to the x-axis and BC is parallel to the y-axis.

The distance from the midpoint of AB to each of the four point charges is given by:

[tex]\mathrm{r_1 = r_3 = \sqrt{(1.5 cm)^2 + (2 cm)^2}= 2.5 cm}[/tex]

[tex]\mathrm{r_2 = r_4 = \sqrt{(1.5 cm)^2 + (1 cm)^2}= 1.8 cm}[/tex]

The electric potential due to each of the point charges at the midpoint of AB is given by:

[tex]\mathrm{V_1 = k \times q / r_1 = (9.0 \times 10^9 N \cdot m^2/C^2) \times (2.0 \times 10^{-6} C) / (2.5 \times 10^{-2} m) = 720 V}[/tex]

[tex]\mathrm{V_2 = k \times q / r_1 = (9.0 \times 10^9 N \cdot m^2/C^2) \times (2.0 \times 10^{-6} C) / (1.8 \times 10^{-2} m) = 100V}[/tex] = 1000 V

[tex]\mathrm{ V_3 =k \times q / r_3 = 720 V}[/tex]

[tex]\mathrm{ V_4 =k \times q / r_4 = 1000V}[/tex]

The total electric potential at the midpoint of AB is the sum of these four potentials:

[tex]\mathbf{V_{total} }[/tex] = V1 + V2 + V3 + V4

= 720 V + 1000 V + 720 V + 1000 V

= 3440 V

Therefore, the electric potential at the midpoint of the rectangle is 3440 V relative to infinity.

To know more about electric potential visit:-

brainly.com/question/30405819

#SPJ4

All of the above given statements are true.

A membrane controls the flow of chemicals between two environments as a selectively permeable barrier. The cell membrane is the most well-known biological membrane.

a. The amount of membrane fluidity varies based on the membrane's make-up. This is because the fluidity of the membrane can be impacted by the lipid composition, particularly the length of fatty acid chains and degree of unsaturation of phospholipids.

b. Phospholipids can travel around the membrane's lateral space quite freely. This is so that individual phospholipids can migrate laterally inside the membrane's lipid bilayer structure.

c. Unanchored proteins can essentially travel wherever they choose in the membrane's lateral space. This is due to the ability of proteins to diffuse laterally within the lipid bilayer, independent of the cytoskeleton or other proteins in the membrane.

These conclusions accurately characterize the degree of fluidity within the membrane and how the ratio of lipids to proteins affects it.

To know more about cell membrane, visit:

https://brainly.com/question/16589545

#SPJ4

Answer:

Look below

Explanation:

The possible genotypes of the offspring are: TT, Tt, and tt.

The possible phenotypes of the offspring are: tall and short.

The percentage chance of being homozygous can be calculated using a Punnett square. When the heterozygous parents are crossed, the possible genotypes of the offspring are:

| T | t

--|---|---

T | TT| Tt

t | Tt| tt

From the Punnett square, we can see that there is a 25% chance of the offspring being homozygous (TT or tt). This is because there are four possible outcomes and two of them result in a homozygous genotype (TT and tt).

The required type of motion can Margaret predicts this coin will have is a circling motion. Option B is correct.

motion is defined as an object's change of position over time is called motion.

Here,

As Margaret drops a coin down a funnel-shaped object. The coin rolls around the outer edge in a circular motion. As it moves closer to the bottom, it completely rolls around the edge.

Margaret can predict that the second coin will have a circling motion as it moves down the funnel-shaped object. The shape of the funnel will cause the coin to roll around the edge in a circular motion.

Thus, the required type of motion can Margaret predicts this coin will have is a circling motion. Option B is correct.

Learn more about motion here:

https://brainly.com/question/3421105
#SPJ1

The angle of refraction of the ray within the prism​  is 1.3

The angle of refraction is described as the angle between a refracted ray and the normal drawn at the point of incidence to the interface at which refraction occurs.

Given, μ=refractive index of liquid.

The angle of incidence, i = 60 °

internal reflection , angle of refraction r = 90 °

Now,  

sinr/ sini = μ / μ1

sin60° =  μ/ 1.5

μ= √3 / 2 x 1.5

μ=1.3​

in conclusion, the angle of refraction is the measurable quantity that indicates the amount of refraction taking place at any boundary.

​Learn more about  angle of refraction  at: https://brainly.com/question/14760207

#SPJ1

​

Complete question:

ACB is a right-angled glass prism with refractive index 1.5. Angle A, B, C are 60

∘

,30  

∘

and 90

∘

 respectively. A thin layer of liquid is on the AB. For a ray of light which is incident normally on AC to ;be totally reflected at AB, the refractive index of the liquid on AB should be

​

​

Kinetic energy of any object is always positive. This should be  hypothesis for any experiment.

A hypothesis is a theory put up to explain a phenomenon. A hypothesis must be testable according to the scientific method for it to be considered a scientific hypothesis.

Scientific hypotheses are typically based on prior observations that cannot be adequately explained by the current body of knowledge. Despite the frequent confusion between the terms "hypothesis" and "theory," a scientific hypothesis differs from a scientific theory.

Learn more about hypothesis here:

https://brainly.com/question/13025783

#SPJ1

Explanation:

P=energy used/time taken

200=40000/t

200t=40000

divide both sides by 200

t=200s

[tex] power = \frac{workdone}{time \: taken} [/tex]

[tex] p = \frac{w}{t} [/tex]

200 = 40,000 / t

200t = 40,000

200t / 200 = 40,000 / 200

t = 200s

However, in general, the law of conservation of momentum states that the total momentum of an isolated system remains constant if there are no external forces acting on the system. This means that the sum of the momenta before an event is equal to the sum of the momenta after the event.

What is the momentum ?

Momentum is the quantity of motion of a moving body, also known as its mass multiplied by its velocity. Momentum is a vector quantity, which means it has both a direction and a magnitude. Momentum is conserved in an isolated system. This means that the total momentum of a system remains constant as long as no external forces act on it. Momentum is an important concept in classical mechanics, as well as in modern physics. In everyday life, momentum can be seen in sports, such as a baseball thrown with a certain speed, or a car moving with a certain speed.

If the red and blue carts are part of an isolated system, their total momentum before the event would be equal to their total momentum after the event. Therefore, any change in the momentum of one cart must be compensated for by an equal and opposite change in the momentum of the other cart.

So, if one cart experiences an increase in momentum after the event, the other cart must experience a decrease in momentum of the same magnitude. Conversely, if one cart experiences a decrease in momentum, the other cart must experience an increase in momentum of the same magnitude.

To learn more about momentum

brainly.com/question/402617

#SPJ4

Because a curved tube is not an homogeneous medium, we cannot perceive a light source through it. Hence the tube should have a straight, homogeneous medium so that the source of the light can be seen.

Light has always represented righteousness, kindness, wisdom, understanding, grace, hope, and the revelation of God in the Bible. On the other side, darkness has been associated with sin, evil, and hopelessness.

Aspects of the divine presence that are felt as light in theophany or visions, or that are depicted as such in allegorical or metaphor, are referred to as divine light in theology.

To know more about light visit:

https://brainly.com/question/15200315

#SPJ1

The new charge on the second capacitor when two capacitors are connected in parallel is calculated to be 611× 10⁻¹⁴ C.

The formula Q = C V = C E d describes the charge held in a capacitor.

where,

C is capacitance

V is the potential across the capacitor

E is the uniform electric field

d is the distance between the plates

The energy stored in a capacitor is given by,

U = 1/2 C V² = 1/2 Q²/C = 1/2 A ε₀ E² d

where,

C is the capacitance

V is the voltage

Q is the charge stored

A is the area of the plates

ε₀ is 8.85 × 10⁻¹² F/m is the permittivity free space

E is the electric field

d is the distance

C₁ is given as 15 × 10⁻¹² F

C₂ is given as 65 × 10⁻¹² F

V₁ is given as 5 × 10³ V

Initial charge on the first capacitor is,

Q' = C₁ V₁ = 15 × 10⁻¹² × 5 × 10³ = 75× 10⁻⁹ C

When two capacitors are connected together, the equivalent capacitance of the new system is,

C = C₁ + C₂ = 15 × 10⁻¹² + 65 × 10⁻¹² = 80 × 10⁻¹² F

Voltage for the new system is, V = Q'/C = (75× 10⁻⁹)/(80 × 10⁻¹²) = 9.4× 10⁻² V

Charge on the second capacitor is,

Q₂ = C₂ V = 65 × 10⁻¹² × 9.4× 10⁻² = 611× 10⁻¹⁴ C

To know more about charge:

https://brainly.com/question/27883618

#SPJ4

The voltage across the resistor and capacitor will be the same. This is because the voltage source is supplying the same voltage to both components, and since the same amount of current is passing .

Voltage is a measure of electrical potential energy per unit charge. It is measured in volts (V). Voltage is an important factor in the functioning of electric circuits. It determines the amount of current that will flow in a circuit. A higher voltage will cause more current to flow through the circuit, while a lower voltage will cause less current to flow. Voltage is also related to power, as the electrical power is equal to the product of the voltage and current. the same amount of current is passing through both components, the voltage drop across each component must be equal.

To learn more about voltage

https://brainly.com/question/1176850

#SPJ4

It takes approximately 0.111 seconds for an object to fall .

Solving for how long does it take for an object to hit the ground:

The time it takes for an object to fall 1.2 meters at a velocity of 5.3 m/s can be calculated using the equation:

t = [tex]\sqrt{\frac{2 * d}{g} }[/tex]

where,

d = the distance fallen

g = the acceleration due to gravity

t = the time taken to fall that distance.

d = 1.2 meters

g = 9.8 m/s²

t= ?

Substituting in the numbers, we get:

t =[tex]\sqrt{\frac{ 2 * 1.2}{9.8\\ } }[/tex]

t  = 0.111 seconds

Hence, it takes approximately 0.111 seconds for an object to fall 1.2 meters at 5.3 m/s.

Learn more about time Calculations on

https://brainly.com/question/13489791

#SPJ1

The gravitational force between two spheres with twice the radius would be 4 times stronger.

The strength of the gravitational force between two masses is proportional to the product of their masses and inversely proportional to the square of the distance between them.

In this scenario, the mass of the spheres increases with the cube of their radius, while the distance between their centers decreases with the increase in radius.

Hence, when the radius of the spheres is doubled, the mass of each sphere increases by a factor of 8 and the distance between their centers decreases by a factor of 2, resulting in a net increase in gravitational force by a factor of 4.

The formula for the gravitational force between two point masses is given by:

F = G × (m1 × m2) / r²

Where F is the gravitational force, G is the gravitational constant, m1 and m2 are the masses of the two spheres, and r is the distance between their centers.

If we have two spheres with radius r, their masses are given by:

m1 = m2 = (4/3) × π × r³ × ρ

Where ρ is the density of the metal. When the radius of the spheres is doubled, their masses become:

m1' = m2' = (4/3) × π × (2r)³ × ρ = 8 × (4/3) × π × r³ × ρ

And the distance between their centers is halved:

r' = r/2

Substituting these values into the equation for gravitational force, we get:

F' = G × (m1' × m2') / r'²

F' = G × (8 × (4/3) × π × r³ × ρ)² / (r/2)²

F' = 4 × G × (4/3) × π × r³ × ρ × (4/3) × π × r³ × ρ / r²

F' = 4 × F

So the gravitational force between the spheres with twice the radius is 4 times stronger than the force between the spheres with the original radius.

To learn more about gravitational force visit: https://brainly.com/question/24783651

#SPJ4

At the start of her fall, the skydiver experiences an acceleration of 9.80 m/s2 in a downward direction. The correct response is option (C), which states that she is accelerating downward.

At the beginning of her fall, the skydiver has an acceleration, and her acceleration is directed downward.

The acceleration is caused by the force of gravity, which is proportional to the mass of the skydiver, and since the skydiver has a mass of 80.0 kg, the force of gravity on her is,

F_gravity = m * g

= (80.0 kg) * (9.80 m/s^2)

= 784 N

According to Newton's second law of motion, the acceleration of an object is proportional to the net force acting on it, and inversely proportional to its mass,

a = F_net / m

The net force,

F_net = F_gravity = (80.0 kg) * (9.80 m/s^2) = 784 N

a = F_net / m = 784 N / 80.0 kg = 9.80 m/s^2

Therefore, the skydiver has an acceleration of 9.80 m/s^2 directed downward at the beginning of her fall. Answer: (C) Yes and her acceleration is directed downward.

To know more about the acceleration, here

brainly.com/question/30753337

#SPJ4

When making a lane change in front of a car, the car should be toward the middle of your rearview mirror. Correct option is D.

Place the seat and steering wheel so that you can access the gear shifter, brake pedal, and accelerator while still feeling comfortable. Move the rearview mirror gently so that you can look straight out of the back windshield's centre without turning your head.

A straight, even reflection of the back window should be visible in the rearview mirror. Every 5 to 8 seconds, check your rearview mirror. You can keep track of who is approaching you, who has already past you, and who is acting erratically or dangerously close behind you by often checking your rearview mirror.

An adjustable reflecting device called a rearview mirror allows drivers to see the road, other cars, and things behind their vehicle.

To know more about mirrors:

https://brainly.com/question/13120439

#SPJ4

The required hydrostatic force on the dam when width and the radius of the dam are given is calculated to be 31284956.29 N.

It is given that width of the dam is 70 m.

Radius of the circle is 7 m.

The height of the dam will be equal to the half of its radius.

h = r/2 = 7/2 = 3.5 m

Area is given by the formula, A = r ω

where,

ω is width

r is radius

Volume is given as, V = ω πr²/4

Horizontal force is given by, Fx = ρ g h A = 1000× 9.8× 7/2× 7× 70 = 16807000 N

Vertical force Fy =  ρ g V = 1000 × 9.8 × 70 × π 7²/4 = 98× 7000× 49π /4 = 26386990 N

The resultant of vertical and horizontal force is nothing but the hydrostatic force.

F = √(Fx² + Fy²) = √(16807000² + 26386990²) = √(282475249000000+696273241260100) = 31284956.29 N

Thus, the hydrostatic force on the dam in N is calculated to be 31284956.29 N.

To know more about hydrostatic force:

https://brainly.com/question/21800451

#SPJ4

After hitting, the two putty blobs that were locked together moved at a speed of 1.5 metres per second.

Both before and after the contact, the momentum is preserved. In other words, the starting and end momentum values are equal.

Initial momentum is 6 kg/s (kg/s = 2 * 3 + 2 * 0).

Thus, the ultimate momentum is 6 kg/m/s.

Final body weight is 2 plus 2 kg.

Final body speed is calculated as final speed/final mass, which is 6/4 = 1.5 m/s.

Thus, 1.5 m/s was the speed of the two putty blobs that had just collided and were stuck together.

Speed is defined as the ratio of distance to the amount of time it took to cover that distance. Due to its lack of magnitude and merely having a direction, speed is a scalar number.

When an item travels an identical distance in a same amount of time, this is referred to as having uniform speed.

Learn more about Speed here:

https://brainly.com/question/11231352

#SPJ4

Tension that a cable withstand if it is used to accelerate a 1300- kg car vertically upward is 13780 N.

Tension is a force along the length of a medium, especially a force carried by a flexible medium, such as a rope or cable. Tension can be defined as an action-reaction pair of forces acting at each end of the said elements.

Given that,

Mass of the car, m = 1300 kg

Acceleration of the car vertically upwards,

As the car is moving vertically upwards. So,

T - mg = ma

T = m(a+g)

[tex]T = 1300 \times (0.8+9.8)[/tex]

T = 13780 N

So, the tension in the cable is 13780 N. Hence, this is the required solution.

To know more about the Tension, here

brainly.com/question/11348644

#SPJ4

Answer:

just build it lol

Explanation:

The birdhouse is made from seven pieces of wood cut from a single 1- x 12-inch pine board, 6-feet long. Measure, mark and cut a 5- x 7-inch piece of board for the bottom of the birdhouse. Measure, mark and cut two 5- x 5

and go from there

The upper plate must move with a force of 143 N in order to move at a speed of 1 m/s. The two fluids' contact has a fluid velocity of 0.714 m/s.

Pipe velocity is an area averaged attribute that is unaffected by the cross-sectional flow pattern or laminarity of the flow in the pipe. For instance, fluid may be moving twice as fast down the center axis as predicted by the pipe velocity.

Fluid Velocity

We are given fluid viscosities as;

₁ = 0.1 N.s/m²

₂ = 0.15 N.s/m²

Thicknesses of plates are;

h₁ = 0.5 mm and h₂ = 0.3 mm

Since the shear stress is constant throughout,

τ = ₁(du₁/dy₁) = ₂(du₂/dy₂)

⇒ ₁(Ui/h₁) = ₂(U - Ui)/h₂

where Ui is the interface speed and U is the upper body's movement speed, we have;

Ui = U/(1 + (₁/₂)*(h₂/h₁))

⇒ Ui = 1/(1 + (0.1/0.15)*(0.3/0.5))

⇒ Ui = 0.714 m/s

Force required is;

F = ₁ * (Ui/h₁) * (A)

We are given A = 1 m²

Thus;

F = 0.1 * (0.714/0.0005) * 1

F ≈ 143 N

To know more about Fluid Velocity visit:-

https://brainly.com/question/28965743

#SPJ4

Question:

Luids of viscosities 1  =0.1 N.s/ms and 2  =0.15 N.s/m2 are contained between two plates (each plate 1

m2 area). The thicknesses are h1=.5 mm and h2=0.3 mm, respectively. Find the force F to make the upper

plate move at a speed of 1 m/s. What is the fluid velocity at the interface between the two fluids?

The velocity and position of a box being pushed across the floor by a constant force with a coefficient of kinetic friction are determined by Newton's second law of motion, which states that the force acting on an object is equal to its mass times its acceleration.

In this scenario, the applied force, friction force, and mass of the box all play a role in determining its velocity and position.

As the box is pushed, it will eventually reach a velocity at which the frictional force is equal in magnitude to the applied force, and the net force on the box will be zero. At this point, the box will move at a constant velocity, as it is no longer accelerating. The position of the box will be dependent on the initial velocity, the applied force, and the time elapsed.

Overall, the velocity and position of a box being pushed across the floor by a constant force with a coefficient of kinetic friction are interrelated and determined by the balance of forces acting on the object.

Learn more about Newton's Laws of motion here:

https://brainly.com/question/14222453

The complete question is:

What is the relationship between the velocity and position of a box being pushed across the floor by a constant force with a coefficient of kinetic friction?

#SPJ4