a couple decides to have children until a daughter is born. assume the probability of a daughter is 0.5. what is the expected number of children of this couple?

A baker purchased 14 lb of wheat flour and 11 lb of rye flour for a total cost of 13.75 dollars. A second purchase, at the same prices, included 12 lb of wheat flour and 13 lb of rye flour.

The cost of the second purchase was 13.75 dollars. We need to find the cost per pound of wheat flour and of the rye flour. Let x and y be the cost per pound of wheat flour and rye flour, respectively. According to the given conditions, we have the following system of equations:14x + 11y = 13.75 (1)12x + 13y = 13.75 (2)Using elimination method, we can find the value of x and y as follows:

Multiplying equation (1) by 13 and equation (2) by 11, we get:182x + 143y = 178.75 (3)132x + 143y = 151.25 (4)Subtracting equation (4) from equation (3), we get:50x = - 27.5=> x = - 27.5/50= - 0.55 centsTherefore, the cost per pound of wheat flour is 55 cents.

To know more about cost visit:

https://brainly.com/question/14566816

#SPJ11

Answer:

1ft - 0.33333 yard

The x-coordinate of the local minimum of g(x) is x = 32/35.

To find the local minima of g(x), we need to find the critical points where the derivative of g(x) is zero or undefined.

g(x) = 7x^5 - 8x^4 + 2

g'(x) = 35x^4 - 32x^3

Setting g'(x) = 0, we get:

35x^4 - 32x^3 = 0

x^3(35x - 32) = 0

This gives us two critical points: x = 0 and x = 32/35.

To determine which of these critical points correspond to a local minimum, we need to examine the second derivative of g(x).

g''(x) = 140x^3 - 96x^2

Substituting x = 0 into g''(x), we get:

g''(0) = 0 - 0 = 0

This tells us that x = 0 is a point of inflection, not a local minimum.

Substituting x = 32/35 into g''(x), we get:

g''(32/35) = 140(32/35)^3 - 96(32/35)^2

g''(32/35) ≈ 60.369

Since the second derivative is positive at x = 32/35, this tells us that x = 32/35 is a local minimum of g(x).

Therefore, the x-coordinate of the local minimum of g(x) is x = 32/35.

To know more about local minimum refer here:

https://brainly.com/question/10878127

#SPJ11

Answer:

72

Step-by-step explanation:

(2^3)=8

(3^2)=9

8*9=72

The expected value of the game is then: E(X) = $10(0.4018) + (-$1)(0.5982) = -$0.1816

Let X be the random variable representing the winnings in the game. Then X can take on two possible values: $10 or $-1. Let p be the probability of winning $10, and q be the probability of losing $1.

To find p, we need to calculate the probability of getting at least one five in a 5-card hand. The probability of not getting a five on a single draw is 47/52, so the probability of not getting a five in the 5-card hand is [tex](47/52)^5[/tex]. Therefore, the probability of getting at least one five is 1 - [tex](47/52)^5[/tex] ≈ 0.4018. So, p = 0.4018 and q = 1 - 0.4018 = 0.5982.

The expected value of the game is then:

E(X) = $10(0.4018) + (-$1)(0.5982) = -$0.1816

This means that, on average, you can expect to lose about 18 cents per game if you play many times.

To know more about probability refer to-

https://brainly.com/question/30034780

#SPJ11

(a) The matrix-vector multiplication Ax can be written as:
Ax = [1 2; 3 4; 1 1] * [x1; x2]

Simplifying this expression, we get:
Ax = [1*x1 + 2*x2; 3*x1 + 4*x2; 1*x1 + 1*x2]

(b) Rewriting the above expression in terms of column vectors, we get:
Ax = x1 * [1; 3; 1] + x2 * [2; 4; 1]

So, we can say that vi = [1; 3; 1] and v2 = [2; 4; 1]

(c) We notice that the vectors vi and v2 are the columns of the matrix A. In other words, we can write A = [vi, v2]. So, when we do matrix-vector multiplication Ax, we are essentially taking a linear combination of the columns of A.

To Know more about linear combination refer here

brainly.com/question/31977121#

#SPJ11

The probability that a randomly chosen student more than 6 grams can be found by dividing the number of students who estimated the mass to be more than 6 grams by the total number of students.

In order to determine the probability, we need to know the number of students who estimated the mass to be more than 6 grams as well as the total number of students. Without this information, it is not possible to provide an exact numerical value for the probability.

However, we can explain the process to calculate the probability. Let's assume there are 100 students in total. If we know that 20 students estimated the mass to be more than 6 grams, then the probability would be 20/100, which simplifies to 0.2 or 20%. This means that there is a 20% chance that a randomly chosen student estimated the mass to be more than 6 grams.

In summary, the probability that a randomly chosen student estimated the mass to be more than 6 grams depends on the number of students who made such an estimation and the total number of students. Without this specific information, we cannot provide an exact probability value.

Learn more about probability here:
https://brainly.com/question/32117953

#SPJ11

a) Alternatives:

1. Build a distribution center near Fresno

2. Build a distribution center near Henderson

States of nature:

1. Earthquake occurs near Fresno in the next 3 years

2. Earthquake does not occur near Fresno in the next 3 years

Payoff table:

                                     |Earthquake occurs | Earthquake does not occur |

Build near Fresno        | -$20 million            | $0 million                              |

Build near Henderson | -$40 million            | -$20 million                           |

b) Expected value calculation without hiring the geologist:

Probability of earthquake occurring near Fresno = 0.20

Expected value of building near Fresno = (0.20) x (-$20 million) + (0.80) x ($0 million) = -$4 million

Expected value of building near Henderson = (0.20) x (-$40 million) + (0.80) x (-$20 million) = -$28 million

Since the expected value of building near Fresno is higher, the optimal alternative is to build near Fresno.

c) Expected value of perfect information (EVPI):

The EVPI is the difference between the expected value with perfect information and the expected value without perfect information.

Without perfect information, the expected value of building near Fresno is -$4 million. With perfect information, Amazon would know whether an earthquake will occur or not and make the decision accordingly.

If an earthquake is predicted, Amazon will choose to build near Henderson and the expected value will be -$20 million.

If an earthquake is not predicted, Amazon will choose to build near Fresno and the expected value will be $0 million.

The probabilities of these two outcomes depend on the accuracy of the geologist's prediction.

If the geologist predicts an earthquake, the probability of an earthquake occurring is 0.90, and the probability of an earthquake not occurring is 0.10.

If the geologist predicts no earthquake, the probability of an earthquake occurring is 0.10, and the probability of an earthquake not occurring is 0.90.

Therefore, the EVPI can be calculated as follows:

EVPI = (0.10 x (-$20 million)) + (0.90 x $0 million) = -$2 million

This means that the maximum Amazon should pay for the geologist's prediction is $2 million.

d) Posterior probabilities:

If the geologist predicts an earthquake:

Probability of an earthquake occurring = 0.90 x 0.20 = 0.18

Probability of no earthquake occurring = 0.10 x 0.80 = 0.08

Normalization factor = 0.18 + 0.08 = 0.26

Posterior probability of an earthquake occurring = 0.18 / 0.26 = 0.6923

Posterior probability of no earthquake occurring = 0.08 / 0.26 = 0.3077

If the geologist predicts no earthquake:

Probability of an earthquake occurring = 0.10 x 0.20 = 0.02

Probability of no earthquake occurring = 0.90 x 0.80 = 0.72

Normalization factor = 0.02 + 0.72 = 0.74

Posterior probability of an earthquake occurring = 0.02 / 0.74 = 0.027

Posterior probability of no earthquake occurring = 0.72 / 0.74 = 0.973

e) Using the calculations from above, the expected value of sample information (EVSI) can be calculated as follows:

EVSI = E(EVSI | E)P(E) + E(EVSI | ¬E)P(¬E)

where E represents the event that an earthquake will occur and ¬E represents the event that an earthquake will not occur.

From the calculations in part (d), the posterior probabilities are P(E) = 0.144 and P(¬E) = 0.856.

If the geologist predicts an earthquake, then the expected value of perfect information (EVPI) is $8 million (calculated in part c).

If the geologist predicts no earthquake, then Amazon will build the distribution center near Fresno without hiring the geologist, so the expected value of sample information is simply the expected value without the geologist, which is $56 million.

Therefore, the EVSI can be calculated as follows:

EVSI = E(EVSI | E)P(E) + E(EVSI | ¬E)P(¬E)

    = ($8 million - $5.5 million) x 0.144 + ($56 million - $5.5 million) x 0.856

    = $44.896 million

Since the EVSI is positive and substantial, Amazon should hire the geologist to reduce uncertainty and improve the decision-making process.

To know more about decision analysis refer here:

https://brainly.com/question/31826371?#

#SPJ11

The statement that is correct is: ΔXYZ ~ΔWVZ by AA similarity.

Two or more triangles are said to be similar if on comparing their corresponding properties, there exists some common relations. Thus showing that the triangles are similar, but not congruent.

The similarity relations can then be expressed with respect to the sides, or/ and angles. Examples: Side-Angle-Side (SAS), Angle-Angle-Side (AAS), etc.

With the information deduced from the given question, the statement that will be correct considering the properties of the triangles is: ΔXYZ ~ΔWVZ by AA similarity.

Learn more about similar triangles at https://brainly.com/question/16553249#SPJ1

The number of child tickets sold is 56, and the number of adult tickets sold is 24.

Let's assume the number of child tickets sold is represented by 'x', and the number of adult tickets sold is represented by 'y'.

According to the given information, the total number of tickets sold is 80. Therefore, we have the equation:

x + y = 80 ---(1)

The total revenue generated from ticket sales is $734.00. Since each child ticket costs $5.50 and each adult ticket costs $11.50, we can express the total revenue as:

5.50x + 11.50y = 734.00 ---(2)

To solve this system of equations, we can use the substitution method or the elimination method. Let's use the elimination method:

Multiply equation (1) by 5.50 to eliminate 'x':

5.50(x + y) = 5.50(80)

5.50x + 5.50y = 440 ---(3)

Subtract equation (3) from equation (2) to eliminate 'x':

(5.50x + 11.50y) - (5.50x + 5.50y) = 734.00 - 440

6.00y = 294

y = 49

Substitute the value of y back into equation (1) to find x:

x + 49 = 80

x = 80 - 49

x = 31

Therefore, the number of child tickets sold is 31, and the number of adult tickets sold is 49, which adds up to a total of 80 tickets, as stated in the problem.

Visit here to learn more about revenue:

brainly.com/question/28558536

#SPJ11

The surface area of the cylindrical vase is approximately: 178.2 square inches.

To find the surface area of the cylindrical vase, we need to calculate the area of the curved surface (lateral area) and the area of the two bases.

Given:

Diameter = 4.3 inches

Radius = Diameter / 2 = 4.3 inches / 2 = 2.15 inches

Height = 11 inches

The lateral area of a cylinder is given by the formula: Lateral Area = 2πrh, where r is the radius and h is the height.

Lateral Area = 2 * 3.14159 * 2.15 inches * 11 inches = 149.17934 square inches

The area of a circle (base) is given by the formula: Base Area = πr^2.

Base Area = 3.14159 * (2.15 inches)^2 = 14.52222 square inches

The total surface area is the sum of the lateral area and the two base areas.

Surface Area = Lateral Area + 2 * Base Area

= 149.17934 square inches + 2 * 14.52222 square inches

≈ 178.2 square inches

Learn more about Surface Area of cylindrical vase on:

https://brainly.com/question/3225258

#SPJ1

Answer:

n = 322

Step-by-step explanation:

n/7 + 12 = 58

Subtract 12 from each side

n/7 = 58-12

n/7 = 46

Multiply each side by 7

n= 46*7

n = 322

To calculate the monthly payment for a mortgage loan, we can use the formula for the fixed monthly payment on a fixed-rate mortgage. The formula is:

M = P * (r * (1 + r)^n) / ((1 + r)^n - 1)

Where:

M = Monthly payment

P = Loan amount

r = Monthly interest rate (annual interest rate divided by 12 and expressed as a decimal)

n = Number of monthly payments (number of years multiplied by 12)

Let's calculate the monthly payment for Lee Hays' mortgage loan:

Loan amount (P) = $240,000

Annual interest rate = 5.50%

Monthly interest rate (r) = 5.50% / 12 = 0.055 / 12 = 0.00458

Number of monthly payments (n) = 25 years * 12 = 300

Plugging the values into the formula:

M = 240,000 * (0.00458 * (1 + 0.00458)^300) / ((1 + 0.00458)^300 - 1)

Using a calculator, the monthly payment (M) is approximately $1,442.05.

Therefore, the monthly payment for Lee Hays' $240,000 mortgage loan at 5.50% interest for 25 years is approximately $1,442.05.

Learn more about approximately here:

https://brainly.com/question/31695967

#SPJ11

In November, the average temperature at the North Pole is -8.3°F. In December, the average temperature is 7.7°F colder than November's average temperature. In January, the average temperature is 1 1/4 times colder than December's average temperature.What is the average temperature at the North Pole in December?Let's determine the average temperature in December by subtracting 7.7°F from November's average temperature:

November's average temperature = -8.3°F December's average temperature = November's average temperature - 7.7°F December's average temperature = -8.3°F - 7.7°F December's average temperature = -16°F Therefore, the average temperature at the North Pole in December is -16°F.What is the average temperature at the North Pole in January?Let's find out the average temperature in January by multiplying the average temperature in December by 1 1/4: December's average temperature = -16°F January's average temperature = December's average temperature x 1 1/4 January's average temperature = -16°F x 1 1/4 January's average temperature = -20°F Therefore, the average temperature at the North Pole in January is -20°F.

To know more about North Pole,visit:

https://brainly.com/question/536099

#SPJ11

by mathematical induction, we have proved that n^2 + 9n + 27 is odd for all natural numbers n.

We can prove this by mathematical induction.

Base case: When n = 1, n^2 + 9n + 27 = 1^2 + 9(1) + 27 = 37, which is an odd number.

Induction hypothesis: Assume that n^2 + 9n + 27 is odd for some natural number k.

Inductive step: We want to prove that (k+1)^2 + 9(k+1) + 27 is odd.

Expanding the expression, we get:

(k+1)^2 + 9(k+1) + 27 = k^2 + 11k + 37

Since we assumed that n^2 + 9n + 27 is odd for some natural number k, we can express it as 2m+1, where m is a non-negative integer.

Substituting this in the above expression, we get:

k^2 + 11k + 37 = (2m+1)^2 + 11(2m+1) + 37

= 4m^2 + 4m + 1 + 22m + 11 + 37

= 4m^2 + 26m + 49

= 2(2m^2 + 13m + 24) + 1

Since 2m^2 + 13m + 24 is an integer, we can see that k^2 + 11k + 37 is odd.

To learn more about  non-negative integer visit:

brainly.com/question/16155009

#SPJ11

a) To find t0.005 when v = 6, we need to look up the value in a t-distribution table with a two-tailed area of 0.005 and 6 degrees of freedom. From the table, we find that t0.005 = -3.707.

b) To find t0.025 when v = 11, we need to look up the value in a t-distribution table with a two-tailed area of 0.025 and 11 degrees of freedom. From the table, we find that t0.025 = -2.201.

c) To find t0.99 when v = 18, we need to look up the value with a one-tailed area of 0.99 and 18 degrees of freedom. From the table, we find that t0.99 = 2.878. Note that we only look up one-tailed area since we are interested in the value in the upper tail of the distribution.

To know more about t-distribution table refer here:

https://brainly.com/question/31129582?#

#SPJ11

(a) Yes, T is a linear transformation.

(b) No, T is not a linear transformation.

(c) Yes, T is a linear transformation.

(a) To determine whether T is a linear transformation, we need to check two conditions: additivity and homogeneity. In this case, T(x, y, z) = (x + 1, y + 1, z + 1) satisfies both conditions.

It preserves addition since T(x₁ + x₂, y₁ + y₂, z₁ + z₂) = (x₁ + x₂ + 1, y₁ + y₂ + 1, z₁ + z₂ + 1) = (x₁ + 1, y₁ + 1, z₁ + 1) + (x₂ + 1, y₂ + 1, z₂ + 1) = T(x₁, y₁, z₁) + T(x₂, y₂, z₂). It also preserves scalar multiplication since T(c⋅x, c⋅y, c⋅z) = (c⋅x + 1, c⋅y + 1, c⋅z + 1) = c⋅(x + 1, y + 1, z + 1) = c⋅T(x, y, z). Therefore, T is a linear transformation.

(b) For T to be a linear transformation, it should preserve both addition and scalar multiplication. However, in this case, T(A) = trace(A) = a11 + a22 + · · · + ann only satisfies the condition of preserving addition. It fails to preserve scalar multiplication because T(c⋅A) = c⋅(a11 + a22 + · · · + ann) ≠ c⋅T(A). Hence, T is not a linear transformation.

(c) Similar to part (a), we need to verify additivity and homogeneity for T to be a linear transformation.

T(x, y) = (1 + x, y) satisfies both conditions. It preserves addition since T(x₁ + x₂, y₁ + y₂) = (1 + (x₁ + x₂), y₁ + y₂) = (1 + x₁, y₁) + (1 + x₂, y₂) = T(x₁, y₁) + T(x₂, y₂). It also preserves scalar multiplication since T(c⋅x, c⋅y) = (1 + c⋅x, c⋅y) = c⋅(1 + x, y) = c⋅T(x, y). Therefore, T is a linear transformation.

For more questions like Linear transformation click the link below:

https://brainly.com/question/13595405

#SPJ11

The frequency for the data values from 8 - 10 is 3. Option D

The frequency (f) of a particular value is the number of times the value occurs in the data.

The distribution of a variable is the pattern of frequencies simply refers to set of all values and the frequencies related to these values.

Frequency distribution gives the information of the number of occurrences of the different values that are distributed within a given time interval.

From the information given, we have that;

5, 3, 8, 4, 2, 5, 6, 2, 7, 4, 9, 10, 3

The frequency for the data values from 8 - 10

8, 9, 10 is 3

Learn more about frequency at: https://brainly.com/question/254161

#SPJ1

An example of a linear transformation applicable to my field of study (artificial intelligence) is the transformation of input data in a neural network. In this context, the input data is transformed using a linear function, often followed by an activation function, to create new representations of the data at each layer of the network.

The kernel of a linear transformation refers to the set of all input vectors that are mapped to the zero vector. In the context of a neural network, the kernel represents the redundancy or null space in the input data. Understanding the kernel helps in reducing overfitting by eliminating unnecessary features or dimensions from the input data.

The range of a linear transformation is the set of all possible output vectors obtained by applying the transformation to the input vectors. In a neural network, the range corresponds to the space of possible outputs that can be generated by the network. Analyzing the range can help in understanding the network's capabilities and limitations, and potentially lead to improvements in the network architecture or training process.

In summary, a linear transformation appears in the context of a neural network in artificial intelligence. The significance of the kernel and range of such a transformation is to understand the redundancy in input data and the capabilities of the network, respectively, which can help improve the performance of the neural network.

Learn more about linear transformation:

https://brainly.com/question/29642164

#SPJ11

The area of the field is 376.99 square feet.

To find the area of the field that receives water from the irrigation sprinkler.

We can use the formula A = (1/2) * [tex]r^2[/tex] * θ, where r is the distance covered by the sprinkler spray and θ is the angle it rotates through.

Given that the distance covered by the sprinkler spray is 40 feet (10) and it rotates through an angle of 135°, we can substitute these values into the formula to calculate the area:

r = 40 feet

θ = 135°

A = (1/2) * [tex](40)^2[/tex] * 135°

Calculating this expression:

A = (1/2) * 1600 * 135°

A = (1/2) * 1600 * (135 * π/180)  [Converting degrees to radians using the conversion factor π/180]

A ≈ (1/2) * 1600 * (135 * 3.14159/180)  [Using an approximation of π as 3.14159]

A ≈ (1/2) * 1600 * (2.35619)

A ≈ 376.9911184 square feet

Therefore, the area of the field that receives water from the irrigation sprinkler is approximately 376.99 square feet when rounded to two decimal places.

Learn more about area of sectors and circular regions

brainly.com/question/31592015

#SPJ11

To determine the cost of laying the slabs around a footpath, we need to know the dimensions of the footpath.

If the footpath is a square with sides measuring 's' meters, the perimeter of the footpath would be 4s.

Since each paving slab measures 2m x 2m, we can fit 2 slabs along each side of the footpath.

Therefore, the number of slabs needed would be (4s / 2) = 2s.

Given that each slab costs £4.50, the total cost of laying the slabs around the footpath would be:

Total Cost = Cost per slab x Number of slabs

Total Cost = £4.50 x 2s

Total Cost = £9s

So, to determine the exact cost, we would need to know the value of 's', the dimensions of the footpath.

Learn more about perimeter here:

https://brainly.com/question/7486523

#SPJ11

a. The circumference of the jar is 56.57 cm

b. The radius is 9cm

The curved surface area of a cylinder is calculated using the formula, curved surface area of cylinder = 2πrh, where 'r' is the radius and 'h' is the height of the cylinder.

C.S.A = 2πrh

C = 2πr

therefore ;

C.S.A = C × h. where c is the circumference

1584 = c × 28

c = 1584/28

c = 56.57 cm

therefore the circumference is 56.57

b) C = 2πr

r = 56.57/6.28

r = 9cm

therefore the radius is 9 cm

learn more about curved surface area of cylinder from

https://brainly.com/question/23426060

#SPJ1

This problem involves a binomial distribution, where the probability of success (an accident involving a single vehicle) is p = 0.7, and the number of trials (accidents) is n = 15. We can use Appendix Table A.1 to look up the probabilities we need.

a. To find the probability that at most 4 accidents involve a single vehicle, we need to calculate the cumulative probability of 0, 1, 2, 3, or 4 successes:

P(X ≤ 4) = P(X = 0) + P(X = 1) + P(X = 2) + P(X = 3) + P(X = 4)

Using the binomial probability formula, we get:

P(X ≤ 4) = C(15, 0) * (0.7)^0 * (1 - 0.7)^(15-0) + C(15, 1) * (0.7)^1 * (1 - 0.7)^(15-1) + C(15, 2) * (0.7)^2 * (1 - 0.7)^(15-2) + C(15, 3) * (0.7)^3 * (1 - 0.7)^(15-3) + C(15, 4) * (0.7)^4 * (1 - 0.7)^(15-4)

Using Table A.1, we can look up each term:

P(X ≤ 4) = 0.000 + 0.001 + 0.014 + 0.079 + 0.234

P(X ≤ 4) = 0.328

Therefore, the probability that at most 4 accidents involve a single vehicle is 0.328.

b. To find the probability that exactly 4 accidents involve a single vehicle, we simply plug in X = 4 into the binomial probability formula:

P(X = 4) = C(15, 4) * (0.7)^4 * (1 - 0.7)^(15-4)

Using Table A.1, we can look up this value:

P(X = 4) = 0.234

Therefore, the probability that exactly 4 accidents involve a single vehicle is 0.234.

c. To find the probability that exactly 6 accidents involve multiple vehicles, we need to calculate the probability of 6 successes and 9 failures:

P(X = 6) = C(15, 6) * (0.3)^6 * (1 - 0.3)^(15-6)

Using Table A.1, we can look up this value:

P(X = 6) = 0.171

Therefore, the probability that exactly 6 accidents involve multiple vehicles is 0.171.

d. To find the probability that between 2 and 4, inclusive, involve a single vehicle, we need to calculate the cumulative probability of 2, 3, and 4 successes:

P(2 ≤ X ≤ 4) = P(X = 2) + P(X = 3) + P(X = 4)

Using the binomial probability formula, we get:

P(2 ≤ X ≤ 4) = C(15, 2) * (0.7)^2 * (1 - 0.7)^(15-2) + C(15, 3) * (0.7)^3 * (1 - 0.7)^(15-3) + C(15, 4) * (0.7)^4 * (1 - 0.7)

To learn more about probability visit:

brainly.com/question/30034780

#SPJ11

The numbers from the given options that rounds to the nearest tenth would be 5.04. That is options D

When a number is given to be rounded up to the nearest tenth some rules needs to be obeyed.

That is;

The number that is in the hundredth place when more than five or equal to five should be added as one to the number in the tenth position.

Therefore,

For 4.95 = 5.0

4.87 = 4.90

4.93 = 4.93

5.04 = 5.04

4.97 = 5.00

Therefore, the number that rounds up to the nearest tenth would be = 5.04.

Learn more about nearest tenth numbers here:

https://brainly.com/question/31637622

#SPJ1

The measure of arc ED from the given circle is 73.5°.

From the given circle, measure of arc ED=(9x-3)°, measure of arc BF=(15x-39)° and ∠BCF=(11x-9)°.

The central angle of an arc is the central angle subtended by the arc. The measure of an arc is the measure of its central angle.

Here, measure of arc BF=∠BCF

(15x-39)°=(11x-9)°

15x-11x=-9+39

4x=30

x=30/4

x=7.5°

∠BCF=(11x-9)°=73.5°

∠BCF=∠ECD=73.5°

So, measure of arc ED=∠ECD=73.5°

Therefore, the measure of arc ED from the given circle is 73.5°.

To learn more about the circle theorems visit:

https://brainly.com/question/19906313.

#SPJ1

In a case whereby PQ←→ is constructed by making arcs centered at A and B without changing the compass width the equation that is not necessarily true is PQ = AB

PQ can be seen as the Perpendicular Bisector of Line Segment AB. However the Perpendicular Bisector of any line segment  is possible through the use of by  compass and expand it more than half,  then place the nib of compass  and mark arc on both side of line segment from both the ends of Segment.

However the PQ=AB, the length of two segments may be equal, is false Statement about the perpendicular bisector PQ.

Learn more about arcs at:

https://brainly.com/question/2490121

#SPJ1

complete question;

PQ←→ is constructed by making arcs centered at A and B without changing the compass width. Which equation is not necessarily true?

PQ = AB

AP = PB

AQ = BQ

AR = RB

The critical angle for light traveling from plastic to air is approximately 42.16 degrees.

The critical angle is the angle of incidence at which the refracted angle of light is 90 degrees, i.e., the angle of refraction is 90 degrees, and the refracted ray travels parallel to the interface between two media.

The critical angle can be calculated using Snell's Law, which relates the angles of incidence and refraction to the indices of refraction of the two media:

n1 * sin(theta1) = n2 * sin(theta2)

where n1 and n2 are the indices of refraction of the first and second media, respectively, and theta1 and theta2 are the angles of incidence and refraction, respectively.

When the angle of incidence is equal to or greater than the critical angle, there is no refracted ray, and all of the light is reflected internally.

To find the critical angle in this case, we can set the angle of refraction to 90 degrees:

n1 * sin(theta1) = n2 * sin(90)

n1 * sin(theta1) = n2

Substituting the values given:

1.50 * sin(theta1) = 1.00

sin(theta1) = 1.00 / 1.50

sin(theta1) = 0.6667

We can use the inverse sine function[tex](sin^-1)[/tex]to find the angle:

[tex]theta1 = sin^-1(0.6667)[/tex]

theta1 = 42.16 degrees

Therefore, the critical angle for light traveling from plastic to air is approximately 42.16 degrees.

For such more questions on critical angle

https://brainly.com/question/15009181

#SPJ11

The critical angle is the angle of incidence at which the refracted angle of light is 90 degrees, causing the light to reflect back into the medium it originated from.

To calculate the critical angle, we use Snell's law, which states that the ratio of the sine of the angle of incidence to the sine of the angle of refraction is equal to the ratio of the refractive indices of the two media.
In this case, the refractive index of plastic is 1.50, and the refractive index of air is 1.00. We want to find the critical angle when light travels from plastic to air. We can set the angle of refraction to 90 degrees, and solve for the angle of incidence.

Snell's Law states that n1 * sin(theta1) = n2 * sin(theta2), where theta1 is the angle of incidence and theta2 is the angle of refraction. At the critical angle, the refracted light will travel parallel to the boundary, meaning that theta2 = 90 degrees.

So, we can modify Snell's Law for this specific case: n1 * sin(theta1) = n2 * sin(90). Since sin(90) = 1, the equation becomes n1 * sin(theta1) = n2.

Now we can solve for theta1:

sin(theta1) = n2 / n1
sin(theta1) = 1.00 / 1.50
sin(theta1) = 0.6667

Now, to find the critical angle, theta1, take the inverse sine (arcsin) of 0.6667:

theta1 = arcsin(0.6667)
theta1 ≈ 41.8 degrees
Therefore, the critical angle for light traveling from plastic to air is 41.8 degrees. If the angle of incidence is greater than 41.8 degrees, the light will be reflected back into the plastic. If the angle of incidence is less than 41.8 degrees, the light will be refracted out of the plastic and into the air.
So, the critical angle, theta1, for light traveling from plastic to air is approximately 41.8 degrees.

Learn more about Snell's Law here: brainly.com/question/2273464

#SPJ11

The x-values π/2, π, 3π/2, and 2π on the x-axis.

We have the function,

y = -6 sin (6/5)x + 6

The period of the sine function is 2π. This means one complete cycle occurs from 0 to 2π.

The amplitude of the function is 6, which represents the distance from the centerline (y = 6) to the maximum and minimum points.

Maximum value: y = 6 + 6 = 12

Minimum value: y = 6 - 6 = 0

The x-intercepts occur when y = 0.

Solve the equation -6sin(x) + 6 = 0 for x.

-6sin(x) = -6

sin(x) = 1

So, The x-values for which sin(x) = 1 are π/2 and 3π/2.

Then, an appropriate scale for the x-axis, such as intervals of π/2 or π/4.

Mark the x-values π/2, π, 3π/2, and 2π on the x-axis.

Learn more about wave equation here:

https://brainly.com/question/4692600

#SPJ1

About $684.08 billion will be spent on restaurants in 2016 if the trend continues.

The amount of money spent at restaurants in a certain country since 2004 has increased at a rate of 8% per annum. In 2004, about $280 billion was spent at restaurants.

To solve this problem, use the formula below to calculate the amount of money spent on restaurants in 2016:P = P₀ (1 + r)ⁿ

Where P is the amount spent on restaurants in 2016, P₀ is the initial amount spent in 2004, r is the rate of increase, and n is the number of years from 2004 to 2016.

We know that P₀ = $280 billion, r = 8% = 0.08, and n = 2016 - 2004 = 12.

Substituting these values into the formula:P = $280 billion (1 + 0.08)¹²P = $280 billion (1.08)¹²P = $280 billion (2.441)P ≈ $684.08 billion

Therefore, about $684.08 billion will be spent on restaurants in 2016 if the trend continues.

Know more about initial amount here,

https://brainly.com/question/32209767

#SPJ11

It takes approximately 13.86 years for a deposit of $1200 to double at 5% compounded continuously.

The formula for continuous compounding is given by:

A = Pe^(rt)

In this case, we want to find the time it takes for a deposit of $1200 to double. That means we want to find the value of t when A = 2P = $2400.

So we can write:

2400 = 1200e^(0.05t)

Dividing both sides by 1200:

2 = e^(0.05t)

Taking the natural logarithm of both sides:

ln(2) = 0.05t

Solving for t:

t = ln(2) / 0.05

Using a calculator, we get:

t ≈ 13.86 years

Therefore, it takes approximately 13.86 years for a deposit of $1200 to double at 5% compounded continuously.

To know more about compound interest refer here:

https://brainly.com/question/14295570

#SPJ11