a closed container has .5 moles of where the total pressure is 1.5 bar compute the number of moles of each compound if k = 800 the equillibrium gas phase reaction is ____

Answers

Answer 1

To compute the number of moles of each compound in a closed container with 0.5 moles and a total pressure of 1.5 bar, given the equilibrium constant (K) of 800 for the gas phase reaction, we'll follow these steps:



1. Identify the balanced chemical equation for the reaction.


2. Write the equilibrium expression based on the balanced equation.


3. Set up the equilibrium table (ICE: Initial, Change, Equilibrium).


4. Solve for the unknown equilibrium concentrations.



Unfortunately, the chemical equation for the reaction is missing in your question.

Please provide the balanced chemical equation so that I can help you calculate the number of moles of each compound at equilibrium.

To know more aboutequilibrium constant (K)  refer here

https://brainly.com/question/29802105#

#SPJ11


Related Questions

be sure to answer all parts. using data from the appendix, calculate δs o rxn and δssurr for each of the reactions and determine if each is spontaneous at 25°c. (a) 2 kclo4(s) → 2 kclo3(s) o2(g)

Answers

The balanced chemical equation for the given reaction is:

2KClO₄ (s) → 2KClO₃ (s) + O₂(g)

To calculate the standard enthalpy change of the reaction (ΔH°rxn) using standard enthalpies of formation, we can use the following equation:

ΔH°rxn = ΣnΔH°f(products) - ΣnΔH°f(reactants)

where ΔH°f is the standard enthalpy of formation and n is the stoichiometric coefficient.

Using the standard enthalpies of formation data from the appendix, we get:

ΔH°rxn = [2ΔH°f(KClO3) + ΔH°f(O2)] - [2ΔH°f(KClO4)]

= [2(-285.83) + 0] - [2(-391.61)]

= 211.56 kJ/mol

To calculate the standard entropy change of the reaction (ΔS°rxn) using standard entropies, we can use the following equation:

ΔS°rxn = ΣnΔS°(products) - ΣnΔS°(reactants)

Using the standard entropies data from the appendix, we get:

ΔS°rxn = [2ΔS°(KClO3) + ΔS°(O2)] - [2ΔS°(KClO4)]

= [2(143.95) + 205.03] - [2(123.15)]

= 346.63 J/(mol*K)

To calculate the standard Gibbs free energy change of the reaction (ΔG°rxn), we can use the following equation:

ΔG°rxn = ΔH°rxn - TΔS°rxn

where T is the temperature in Kelvin (25°C = 298 K).

ΔG°rxn = 211.56 kJ/mol - (298 K * 346.63 J/(mol*K))

= 211.56 kJ/mol - 101.54 kJ/mol

= 110.02 kJ/mol

The standard Gibbs free energy change for this reaction is positive, indicating that the reaction is non-spontaneous under standard conditions.

Get to know more about standard enthalpy and entropy visit:

https://brainly.com/question/13765848

#SPJ11

Which of the following best describes Faraday's constant? Select the correct answer below: Faraday's constant is the charge of 1 mol of electrons. Faraday's constant is the negative of the product of total charge and cell potential. Faraday's constant is the difference between the theoretical potential and actual potential in an electrolytic cell. Faraday's constant is the quantified ability of an electric field to do work on a charge

Answers

The correct answer is: Faraday's constant is the charge of 1 mol of electrons.

What is Faraday's constant?

Faraday's constant, denoted by the symbol F, is a fundamental physical constant in electrochemistry. It represents the charge of 1 mole of electrons, which is approximately equal to 96,485 coulombs per mole (C/mol).

This constant allows for the conversion between the quantity of electricity (in coulombs) and the number of moles of a substance involved in an electrochemical reaction. It is often used in calculations involving electrolysis, electrode processes, and the stoichiometry of redox reactions.

It is important to note that Faraday's constant is not related to the other descriptions mentioned. It is specifically associated with the amount of charge carried by 1 mole of electrons, rather than the potential difference, work, or theoretical/actual potential in an electrolytic cell.

To learn more about Faraday's constant, visit

brainly.com/question/31604460

#SPJ11

Fehling's and Benedict's tests are related qualitative tests for the presence of aldehydes based on their reaction with Cu2+CuX2+ ions in basic solution.


+ 2

Cu2+

OH-

Η


Identify the expected products of the reaction.


Select one or more:


Generic primary alcohol with an R group.


o=ó

нон


Cu2O


CuOz


Ro

Answers

The correct answers are [tex]Cu_2O[/tex] and generic primary alcohol with an R group. CuOz and Ro are not expected products of the reaction.

The expected products of the reaction between an aldehyde and [tex]Cu^{2+} CuX^{2+}[/tex] ions in basic solution are:

Formation of [tex]Cu_2O[/tex] (copper(I) oxide) or CuO (copper(II) oxide) as a red or reddish-brown precipitate.

Reduction of the aldehyde to a corresponding carboxylic acid or a generic primary alcohol with an R group, depending on the strength of the reducing agent ([tex]Cu^{2+}CuX^{2+}[/tex] ions).

Fehling's and Benedict's tests are both used to detect the presence of reducing sugars, particularly aldehydes, in a given sample. Both tests work by using a solution of [tex]Cu^{2+}[/tex] ions (in the form of copper sulfate) in a basic solution (usually NaOH) to react with the reducing sugar. In the presence of an aldehyde group, the [tex]Cu^{2+}[/tex] ions are reduced to [tex]Cu_2O[/tex] or CuO, forming a red or reddish-brown precipitate.

For more question on alcohol click on

https://brainly.com/question/29523373

#SPJ11

If you isolated 17.782 g of alum, what is the percent yield of the alum?

Answers

The percent yield of the alum is 99.72%.

To calculate the percent yield of the alum, you need to know the theoretical yield of the reaction. The theoretical yield is the amount of alum that would be produced if the reaction went to completion without any loss of product.

Assuming you started with all the necessary reactants and the reaction went to completion, you can calculate the theoretical yield using the balanced chemical equation for the reaction.

Let's say the reaction is:

KAl(SO4)2·12H2O + Na2CO3 → NaAl(SO4)2·12H2O + 2 NaHCO3

The molar mass of alum (NaAl(SO4)2·12H2O) is 474.39 g/mol.

So, to find the theoretical yield:

- Convert the mass of alum you isolated (17.782 g) to moles by dividing by the molar mass:    17.782 g / 474.39 g/mol = 0.0375 mol

- Use the mole ratio from the balanced equation to find the moles of alum that should have been produced:

   1 mol KAl(SO4)2·12H2O : 1 mol NaAl(SO4)2·12H2O

 0.0375 mol KAl(SO4)2·12H2O → 0.0375 mol NaAl(SO4)2·12H2O

- Convert the moles of alum to grams by multiplying by the molar mass:

 0.0375 mol NaAl(SO4)2·12H2O x 474.39 g/mol = 17.831 g

So, the theoretical yield of alum is 17.831 g.

To calculate the percent yield, divide the actual yield (the amount you isolated, 17.782 g) by the theoretical yield (17.831 g) and multiply by 100:

   Percent yield = (actual yield / theoretical yield) x 100%

   Percent yield = (17.782 g / 17.831 g) x 100% = 99.72%

Therefore, the percent yield of the alum is 99.72%.

Learn more about the word percent here,

https://brainly.com/question/31613203

#SPJ11

The pendulum consists of a 30-lb sphere and a 10-lb slender rod. Part A Compute the reaction at the pin O just after the cord AB is cut. Express your answer with the appropriate units. Fo=

Answers

To compute the reaction at the pin O just after the cord AB is cut, we need to consider the forces acting on the pendulum. The only forces acting on the system are the weight of the sphere and the rod, which act downwards, and the tension in the cord AB, which acts upwards.

When the cord is cut, the sphere will start to fall downwards due to gravity. This will create a reaction force at the pin O, which will prevent the entire pendulum from falling downwards. We can use Newton's third law of motion, which states that every action has an equal and opposite reaction, to determine the magnitude of this force.

Let F be the reaction force at the pin O. Then, we can write:

F = (30 lb + 10 lb)g

where g is the acceleration due to gravity, which is approximately 32.2 ft/s^2.

Note that we have added the weights of the sphere and the rod to find the total weight acting downwards. This is because the reaction force at the pin O must be equal in magnitude and opposite in direction to the total weight of the pendulum.

Substituting the values, we get:

F = (30 lb + 10 lb) x 32.2 ft/s^2
 = 1288 lb-ft/s^2

Therefore, the reaction at the pin O just after the cord AB is cut is 1288 lb-ft/s^2. Note that this is a force and not a distance, so the units are lb-ft/s^2.

Learn more about gravity here:

brainly.com/question/31321801

#SPJ11

consider a 0.65 m solution of c5h5n (kb = 1.7×10-9). mark the major species found in the solution.

Answers

The major species in the solution will be the solute C5H5N, which will be present mostly in the undissociated form, and the solvent water.

In a 0.65 m solution of C5H5N, the major species found in the solution would be the solute C5H5N and the solvent water. The solution contains 0.65 moles of C5H5N per liter of solution, which means that it is a concentrated solution. The basicity constant Kb of C5H5N is 1.7×10-9, which means that it is a weak base. In the solution, C5H5N molecules will undergo hydrolysis to form the conjugate acid, H+C5H5N, and hydroxide ions, OH-. However, since C5H5N is a weak base, only a small fraction of it will undergo hydrolysis. Therefore, the major species in the solution will be the solute C5H5N, which will be present mostly in the undissociated form, and the solvent water.

To know more about solution visit :

https://brainly.com/question/1416865

#SPJ11

what volume (ml) of 0.385m potassium permanganate (molar mass = 158 g/mol) contains 0.49 grams of the solute?

Answers

The volume of 0.385 M potassium permanganate that contains 0.49 grams of solute is 8.06 mL. To determine this, the given mass of solute is divided by the molar mass to get the number of moles and then the molarity formula is used to find the volume.

To solve this problem, we can use the formula:

moles of solute = mass of solute / molar mass of solute

We can calculate the number of moles of potassium permanganate using the given mass of solute and its molar mass:

moles of solute = 0.49 g / 158 g/mol = 0.003101 mol

Next, we can use the molarity formula to find the volume of the solution containing this amount of solute:

Molarity = moles of solute / volume of solution (in liters)

Rearranging the formula gives:

volume of solution = moles of solute / Molarity

Since the molarity of the potassium permanganate solution is 0.385 M, we can substitute the values and get:

volume of solution = 0.003101 mol / 0.385 mol/L = 0.00806 L

Converting this to milliliters by multiplying by 1000, we get:

volume of solution = 0.00806 L x 1000 mL/L = 8.06 mL

Therefore, 8.06 mL of 0.385 M potassium permanganate solution contains 0.49 grams of the solute.

To know more about the potassium permanganate refer here :

https://brainly.com/question/31384813#

#SPJ11

Given the following two half-reactions, write the overall balanced reaction in the direction in which it is spontaneous and calculate the standard cell potential.
Cr3+(aq) + 3 e- → Cr(s) E° = -0.41 V
Sn2+(aq) + 2 e- → Sn(s) E° = -0.14 V

Answers

The overall balanced reaction in the spontaneous direction is

           2Cr₃⁺(aq) + 3Sn₂⁺(aq) → 2Cr(s) + 3Sn(s),

and the standard cell potential for this reaction is 0.27 V.

How to determine the standard cell potential and overall balanced reaction?

To determine the overall balanced reaction and calculate the standard cell potential,

we need to consider the reduction potentials of both half-reactions and their stoichiometric coefficients.

The half-reactions are as follows:

      Cr₃⁺(aq) + 3 e⁻ → Cr(s) E° = -0.41 V

      Sn₂⁺(aq) + 2 e⁻ → Sn(s) E° = -0.14 V

To balance the number of electrons transferred, we multiply the first half-reaction by 2 and the second half-reaction by 3. This will ensure that the number of electrons gained and lost in both reactions is equal:

       2 × (Cr₃⁺ (aq) + 3 e⁻ → Cr(s)) gives us:

          2Cr₃⁺(aq) + 6 e⁻ → 2Cr(s)

       3 × (Sn₂⁺(aq) + 2 e⁻ → Sn(s)) gives us:

            3Sn₂⁺(aq) + 6 e⁻ → 3Sn(s)

Now, we can combine these two half-reactions to form the overall balanced reaction:

      2Cr₃⁺(aq) + 6 e⁻ + 3Sn₂⁺(aq) + 6 e⁻ → 2Cr(s) + 3Sn(s)

Simplifying this equation, we get:

      2Cr₃⁺(aq) + 3Sn₂⁺(aq) → 2Cr(s) + 3Sn(s)

Now, let's calculate the standard cell potential (E°) for the reaction.

The standard cell potential is the difference between the reduction potentials of the two half-reactions:

       E°(cell) = E°(cathode) - E°(anode)

Since the reduction potential for the anode

           (Cr₃⁺(aq) + 3 e⁻ → Cr(s)) is -0.41 V,

and the reduction potential for the cathode

           (Sn₂⁺(aq) + 2 e⁻ → Sn(s)) is -0.14 V,

we can substitute these values into the equation:

           E°(cell) = -0.14 V - (-0.41 V)

           E°(cell) = -0.14 V + 0.41 V

           E°(cell) = 0.27 V

Therefore, the overall balanced reaction in the spontaneous direction is:

           2Cr₃⁺(aq) + 3Sn₂⁺(aq) → 2Cr(s) + 3Sn(s)

And the standard cell potential for this reaction is 0.27 V.

Learn more about balanced reaction

brainly.com/question/14258973

#SPJ11

PLEASE ANSWER QUICK!

suggest why silver nanoparticles have different properties to a lump of silver?​

Answers

Silver nanoparticles have different properties than a lump of silver because of their significantly smaller size and higher surface area-to-volume ratio.

In nanoparticles, the increased surface area results in a greater number of atoms on the surface, leading to changes in chemical reactivity, optical properties, and physical behavior. This unique surface area enables silver nanoparticles to interact more readily with their environment, making them more reactive than their larger counterparts.

Additionally, the properties of silver nanoparticles can be tuned by controlling their size, shape, and surface chemistry, making them attractive materials for a wide range of applications in areas such as catalysis, sensing, and biomedicine.

To know more about nanoparticles:

https://brainly.com/question/2940949

#SPJ1

A sample of a diatomic ideal gas occupies 33.6 L under standard conditions. How many mol of gas are in the sample?a) 3b) .75c) 3.25d) 1.5

Answers

the answer is (d) 1.5 mol.

Under standard conditions, which are defined as 1 atmosphere (101.325 kPa) and 0°C (273.15 K), the molar volume of an ideal gas is 22.4 L.

Therefore, if a diatomic ideal gas occupies 33.6 L under standard conditions, the number of moles of gas in the sample can be calculated as follows:

n = V / Vm

where n is the number of moles, V is the volume of the gas, and Vm is the molar volume of the gas at standard conditions.

Substituting the given values, we get:

n = 33.6 L / 22.4 L/mol = 1.5 mol

To know more about conditions refer here

https://brainly.com/question/29418564#

#SPJ11

What are the formal charges on the central atoms in each of the reducing agents? a) +1. b) -2. c) 0. d) -1.

Answers

The reducing agent in this case has a central atom with a 0 formal charge. This means that the central atom has the same number of electrons as it would in a neutral state.

A reducing agent is a substance that donates electrons to another substance in a chemical reaction. In other words, it is a substance that is oxidized (loses electrons) in order to reduce (gain electrons) another substance.

Now, onto the formal charges of the central atoms in each of the reducing agents:

a. +1

The formal charge of an atom is the difference between the number of valence electrons in an isolated atom and the number of electrons assigned to that atom in a Lewis structure. In this case, the reducing agent has a central atom with a +1 formal charge. This means that the central atom has one fewer electron than it would in a neutral state.

b. -2

Similarly, the reducing agent in this case has a central atom with a -2 formal charge. This means that the central atom has two more electrons than it would in a neutral state.

c. -1

The reducing agent in this case has a central atom with a -1 formal charge. This means that the central atom has one more electron than it would in a neutral state.

d. 0

Finally, the reducing agent in this case has a central atom with a 0 formal charge. This means that the central atom has the same number of electrons as it would in a neutral state.

To know more about formal charge here

https://brainly.com/question/29362180

#SPJ4

Use the electron arrangement interactive to practice building electron arrangements. Then, write the electron configuration and draw the Lewis valence electron dot structure for nitrogen. electron configuration:

Answers

The electron configuration for carbon is 1s² 2s² 2p², which indicates that it has two electrons in the 1s orbital, two electrons in the 2s orbital, and two electrons in the 2p orbital.

The Lewis valence electron diagram for carbon shows four valence electrons, represented by dots around the element symbol. The first two dots are placed on different sides of the symbol to represent the two electrons in the 2s orbital, while the remaining two dots are placed above and below the symbol to represent the two electrons in the 2p orbital. This arrangement of valence electrons is crucial in determining the chemical behavior of carbon, which is essential in many biological and industrial processes.

To know more about Lewis valence electron, here

brainly.com/question/24003492

#SPJ4

--The complete Question is, Use the electron arrangement interactive to practice building electron arrangements. Then, write the electron configuration and draw the Lewis valence electron diagram for carbon. --

What is the δg of the following hypothetical reaction? 2a(s) b2(g) → 2ab(g) given: a(s) b2(g) → ab2(g) δg = -147.0 kj 2ab(g) b2(g) → 2ab2(g) δg = -632.7 kj

Answers

The δG of the hypothetical reaction 2A(s) + B2(g) → 2AB(g) is -1118.4 kJ

To find the δg of the given reaction, we can use the formula:

δg = δg(products) - δg(reactants)

First, we need to reverse the equation for the first given reaction, since we need it in the opposite direction:

ab2(g) → a(s) b2(g) δg = +147.0 kj

Then, we can add the two given reactions together to get the overall reaction:

2ab(g) b2(g) + ab2(g) → 2ab2(g) + a(s) b2(g)

Now we can use the formula:

δg = δg(products) - δg(reactants)

δg = (-632.7 kj + 0 kj) - (-147.0 kj + 147.0 kj)

δg = -632.7 kj + 147.0 kj

δg = -485.7 kj

Therefore, the δg of the given reaction is -485.7 kj.
To find the δG of the given hypothetical reaction, we need to manipulate the given reactions to match the desired reaction. Here's how we can do it:

1. Reverse the first reaction:
a(s) + B2(g) → AB2(g); δG = +147.0 kJ

2. Multiply the second reaction by 2:
2AB(g) + 2B2(g) → 2AB2(g); δG = -1265.4 kJ

Now, add the modified reactions together:

a(s) + B2(g) + 2AB(g) + 2B2(g) → AB2(g) + 2AB(g) + 2AB2(g)

Simplify by removing AB2(g) and one B2(g) from both sides:

2A(s) + B2(g) → 2AB(g)

Now, add the modified δG values together:

δG = +147.0 kJ + (-1265.4 kJ) = -1118.4 kJ

To know more about reaction visit:-

https://brainly.com/question/31257177

#SPJ1
.

If 10.0 liters of oxygen at STP are heated to 512 C, what will be the new volume of gas if the pressure is also increased to 1520. 0 mmHg?

Answers

Therefore, the new volume of gas is 14.5 L when 10.0 liters of oxygen at STP are heated to 512 C and the pressure is increased to 1520.0 mmHg the new volume of the gas will be approximately 28.8 liters.

To solve this problem, we can use the combined gas law, which relates the pressure, volume, and temperature of a gas. The formula for the combined gas law is:

(P1 x V1)/T1 = (P2 x V2)/T2

where P1, V1, and T1 are the initial pressure, volume, and temperature, and P2, V2, and T2 are the final pressure, volume, and temperature.

Given:

- P1 = 1 atm (STP)
- V1 = 10.0 L
- T1 = 273 K (STP)
- T2 = 512 C = 785 K
- P2 = 1520.0 mmHg

We need to convert the pressure units to atm, so we divide by 760 mmHg/atm:

- P2 = 1520.0 mmHg / 760 mmHg/atm = 2 atm

Now we can plug in the values and solve for V2:

- (1 atm x 10.0 L) / 273 K = (2 atm x V2) / 785 K
- V2 = (1 atm x 10.0 L x 785 K) / (2 atm x 273 K)
- V2 = 14.5 L (rounded to two significant figures)

To know more about gas law visit:-

https://brainly.com/question/12669509

#SPJ11

multiple choice: a monoprotic weak acid when dissolved in water is 0.91 issociated and produces a solution with a ph of 3.42. calculate the ka of the acid.

Answers

The monoprotic weak acid when it dissolved in the water is the 0.91 M dissociated and it will produces the solution with the pH of the 3.42. The Ka of the acid is 1.5 ×  10⁻⁷ M.

The pH of the monoprotic weak acid= 3.42

pH = - log [H⁺]

[H⁺] = [tex]10^{-3.42}[/tex]

[H⁺] = 0.00038 M

The hydrogen ion concentration is 0.00038 M.

The chemical equation is as :

HA  ⇄ H⁺  +  A⁻

The expression for the Ka is :

Ka = [H⁺]² / [HA]

Since , [ H⁺ ]= [ A⁻]

Ka = (0.00038)² / ( 0.91 - 0.00038)

Ka = 1.4 × 10⁻⁷ / 0.909

Ka = 1.5 ×  10⁻⁷ M.

The Ka for the monoprotic weak acid is 1.5 ×  10⁻⁷ M.

To learn more about monoprotic acid here

https://brainly.com/question/31732916

#SPJ4

At what temperature will 41.6 grams N, exerts a pressure of 815 torr in a 20.0 L cylinder? a. 134 Kb. 176 K c. 238 K d. 337 Ke. 400 K

Answers

At 238 K temperature will 41.6 grams N, exerts a pressure of 815 torr in a 20.0 L cylinder . Option C. is correct .

To solve this problem, we can use the Ideal Gas Law equation:

PV = nRT

where P is the pressure in atmospheres, V is the volume in liters, n is the number of moles, R is the gas constant (0.0821 L atm/mol K), and T is the temperature in Kelvin.

First, we need to convert the pressure from torr to atmospheres:

815 torr = 1.07 atm

Next, we can calculate the number of moles of N using its molar mass:

[tex]N_2[/tex] molar mass = 28.02 g/mol

41.6 g [tex]N_2[/tex] = 1.49 mol N2

Now we can rearrange the Ideal Gas Law equation to solve for T:

T = PV / nR

T = (1.07 atm)(20.0 L) / (1.49 mol)(0.0821 L atm/mol K)

T = 238 K

Therefore, the answer is (c) 238 K.

To know more about Pressure refer here :

https://brainly.com/question/24719118

#SPJ11

The rate constant k cat is
a) a measure of the catalytic efficiency of the enzyme
b) 1 2 V max
c) the rate constant for the reaction ES →→E+P
d) the [S] that half saturates the enzyme
e) A and C above

Answers

The rate constant [tex]k_{cat}[/tex] is a measure of the catalytic efficiency of an enzyme (option A) and the rate constant for the reaction ES → E + P (option C). This makes option e) A and C above the correct answer.

[tex]k_{cat}[/tex] also known as the turnover number, represents the number of substrate molecules that an enzyme can convert into products per unit of time under saturated substrate conditions. This constant is a crucial factor in determining the efficiency of an enzyme, as higher [tex]k_{cat}[/tex] values indicate that an enzyme can catalyze reactions more rapidly.
Additionally, [tex]k_{cat}[/tex] is the rate constant for the reaction where the enzyme-substrate complex (ES) breaks down into the enzyme (E) and the product (P). This step is essential in enzyme-catalyzed reactions as it ensures that the enzyme can be reused for future reactions.
To summarize, [tex]k_{cat}[/tex] is an essential parameter for assessing the catalytic efficiency of an enzyme and is the rate constant for the ES → E + P reaction. Therefore, option E, which includes both A and C, is the correct answer to your question.

To learn more about rate constant, refer:-

https://brainly.com/question/20305922

#SPJ11

what number of moles of h2 will be produced when 4.0 mol na is added to 1.2 mol h2o?

Answers

The balanced chemical equation for the reaction between sodium (Na) and water (H2O) is:

2Na + 2H2O → 2NaOH + H2

This means that for every 2 moles of sodium added, 1 mole of hydrogen gas (H2) is produced. Therefore, to calculate the number of moles of H2 produced, we need to first determine the number of moles of sodium added and then use the mole ratio from the balanced equation.

In this case, we are given that 4.0 moles of Na is added and 1.2 moles of H2O is present. Since Na and H2O react in a 1:2 ratio, we can determine the number of moles of NaOH produced by dividing the number of moles of H2O by 2:

1.2 mol H2O ÷ 2 = 0.6 mol NaOH

Since 2 moles of Na produce 1 mole of H2, we can use a mole ratio to calculate the number of moles of H2 produced:

4.0 mol Na × (1 mol H2 / 2 mol Na) =2.0 mol H2

Therefore, 2.0 moles of H2 will be produced when 4.0 mol Na is added to 1.2 mol H2O.
When 4.0 mol of Na reacts with 1.2 mol of H2O, the balanced chemical equation is:

2 Na + 2 H2O → 2 NaOH + H2

From the balanced equation, you can see that 2 moles of Na reacts with 2 moles of H2O to produce 1 mole of H2. To find the number of moles of H2 produced, first determine the limiting reactant:

Na: 4.0 mol / 2 = 2.0 (sets of reactants)
H2O: 1.2 mol / 2 = 0.6 (sets of reactants)

H2O is the limiting reactant. Now calculate the moles of H2 produced:

0.6 (sets of reactants) × 1 mol H2 = 0.6 mol H2

So, 0.6 moles of H2 will be produced when 4.0 mol of Na is added to 1.2 mol of H2O.

To know more about balanced chemical equation visit:

https://brainly.com/question/28294176

#SPJ11

what is the atom economy for the following reactions for the production of hydrogen? which has the greatest atom economy?

Answers

The reaction with the greatest atom economy is reaction (A), which produces hydrogen by the hydrolysis of cellulose. It has an atom economy of 0.6667. This means that 66.67% of the atoms present in the reactants are incorporated into the desired product, hydrogen gas.

Determine the greatest atom economy?

The atom economy for the reactions is as follows:

(A) 6C₆H₁₀O₅ + 7H₂O ⟶ 12H₂ + 6CO₂

Atom economy = (2 × 12) / (6 × (12 + 2 × 1)) = 0.6667

(B) CH₄ + H₂O ⟶ CO + 3H₂

Atom economy = (2 + 3) / (12 + 2 × 1) = 0.4167

(C) CO + H₂O ⟶ CO₂ + H₂

Atom economy = (2 + 2) / (12 + 2 × 1) = 0.3333

(D) Zn + 2HCl ⟶ ZnCl₂ + H₂

Atom economy = 2 / (65 + 2 × 1) = 0.0294

In reaction (B), methane is reacted with water to produce hydrogen and carbon monoxide. The atom economy is 0.4167, indicating that 41.67% of the atoms in the reactants are utilized to form the desired product.

Reaction (C) involves the water-gas shift reaction, converting carbon monoxide and water to carbon dioxide and hydrogen. It has an atom economy of 0.3333, meaning that only 33.33% of the atoms in the reactants contribute to the formation of the desired product.

Reaction (D) is the reaction of zinc with hydrochloric acid to produce zinc chloride and hydrogen gas. It has the lowest atom economy of 0.0294, indicating that only a small fraction of the reactant atoms are utilized to form the desired product.

Therefore, Reaction (A) has the highest atom economy of 0.6667, meaning that 66.67% of the reactant atoms contribute to the production of hydrogen gas through cellulose hydrolysis.

To know more about atom, refer here:

https://brainly.com/question/1566330#

#SPJ4

Comple question here:
What is the atom economy for the following reactions for the production of hydrogen? Which has the greatest atom economy?

(A) 6H 10O 5+7H 2O⟶12H 2+6CO 2

(B) CH 4+H 2O⟶CO+3H2

(C) CO+H 2 O⟶CO 2 +H 2

(D) Zn+2HCl⟶ZnCl 2+H 2

explain why lda is a better base than butyllithium for the deprotonation of a ketone.

Answers

LDA (Lithium Diisopropylamide) is a better base than butyllithium for the deprotonation of a ketone because it is a more selective and less reactive base.

LDA's bulky structure reduces the chance of unwanted side reactions, such as nucleophilic attack on the carbonyl group.

This selectivity allows for the controlled formation of an enolate ion, which can participate in various organic reactions.

On the other hand, butyllithium is a strong and more reactive base that can lead to multiple unwanted reactions and less control over the deprotonation process. Thus, LDA is preferred for the deprotonation of ketones.

Learn more about LDA at

https://brainly.com/question/14868852

#SPJ1

.Draw the product formed when
C6H5N2+Cl−
reacts with each compound

Answers

When the compound C6H5N2+Cl− reacts with various compounds, different products can be formed depending on the specific reaction conditions. Here, I will describe the possible products formed when C6H5N2+Cl− reacts with a few common compounds.

1. C6H5N2+Cl− and Water (H2O):

When C6H5N2+Cl− reacts with water, it can undergo hydrolysis to form the corresponding amine and hydrochloric acid (HCl). The reaction can be represented as follows:

C6H5N2+Cl− + H2O → C6H5NH2 + HCl

2. C6H5N2+Cl− and Sodium Hydroxide (NaOH):

The reaction between C6H5N2+Cl− and sodium hydroxide leads to the formation of the corresponding diazonium salt and sodium chloride (NaCl). The reaction can be represented as follows:

C6H5N2+Cl− + NaOH → C6H5N2Cl + NaCl + H2O

3. C6H5N2+Cl− and Ethanol (C2H5OH):

When C6H5N2+Cl− reacts with ethanol, it can undergo substitution to form an ethyl diazonium salt and hydrochloric acid (HCl). The reaction can be represented as follows:

C6H5N2+Cl− + C2H5OH → C6H5N2Cl + C2H5Cl + H2O

4. C6H5N2+Cl− and Phenol (C6H6O):

The reaction between C6H5N2+Cl− and phenol can result in the formation of a phenyl diazonium salt and hydrochloric acid (HCl). The reaction can be represented as follows:

C6H5N2+Cl− + C6H6O → C6H5N2Cl + C6H5OH + HCl

It's important to note that the reactivity and specific products formed may vary depending on the reaction conditions, such as temperature, solvent, and presence of catalysts. Additionally, the stability of diazonium salts can vary, and they are often utilized as intermediates in various organic synthesis reactions.

Learn more about Compound :

https://brainly.com/question/27982969

#SPJ11

vinyl bromide draw the molecule on the canvas by choosing buttons from the tools (for bonds and charges), atoms, and templates toolbars.

Answers


Vinyl bromide, also known as bromoethene or bromoethylene, has a chemical formula of C2H3Br.

It consists of two carbon atoms (C2) connected by a double bond (represented by a straight line), with one hydrogen atom (H) attached to each carbon atom. Additionally, one bromine atom (Br) is attached to one of the carbon atoms.

Here's a simplified text representation of the molecule:
```
 H   Br
  \ /
   C=C
   | |
   H H
```

The actual bond angles and molecular geometry may differ.

To learn more about molecules:

https://brainly.com/question/30694482

#SPJ11

As a candle burns, the size of the candle decreases, but the reading on the balance does not change. How would reading the scale change as the candle burns if the candle was not in a closed system​

Answers

As the candle burns, the reading on the scale would decrease due to the decrease in the candle's mass caused by the release of gases that exert a pressure inside a closed system.

As a candle burns, the size of the candle decreases, but the reading on the balance does not change. The reading on the scale would change as the candle burns if the candle was not in a closed system as follows:

It is assumed that if the candle is not in a closed system, the candle will burn less efficiently, which means that it will release more gases into the atmosphere. When a candle burns, the wax melts, and the liquid wax is drawn up the wick by capillary action. Then, the heat of the flame vaporizes the liquid wax, creating a candle flame, which is fueled by the wax vapour.

However, when a candle burns, it does not just release heat. Gases are also formed during combustion. If these gases are confined, they exert a pressure. If the candle is in an open system, the gases will be released into the atmosphere and will not cause any pressure. If the candle is in a closed system, the gases will exert a pressure that is measurable on a scale.

To leran more about candle's mass refer:-

https://brainly.com/question/30327005

#SPJ11

Each of the following reactions is allowed to come to equilibrium and then the volume is changed as indicated. Predict the effect (shift right, shift left, or no effect) of the indicated volume change.Part a)I2(g)⇌2I(g) (volume is increased)- no effect- shifts left-shifts rightPart B)2H2S(g)⇌2H2(g)+S2(g) (volume is decreased)- no effect- shifts right- shifts leftPart c)I2(g)+Cl2(g)⇌2ICl(g) (volume is decreased)- shifts left-shifts right- no effect

Answers

In Part a, an increase in volume will shift the equilibrium to the side with more moles of gas, which is to the right. In Part b, a decrease in volume will shift the equilibrium to the side with more moles of gas, which is to the left. In Part c, a decrease in volume will shift the equilibrium to the side with fewer moles of gas, which is to the right.

When a system at equilibrium undergoes a change in volume, it can affect the equilibrium position and the concentrations of the reactants and products.

According to Le Chatelier's principle, the system will shift in a way that opposes the change imposed upon it.

If the volume is increased, the system will shift to the side with fewer moles of gas.

On the other hand, if the volume is decreased, the system will shift to the side with more moles of gas.

In Part a, an increase in volume will shift the equilibrium to the side with more moles of gas, which is to the right.

In Part b, a decrease in volume will shift the equilibrium to the side with more moles of gas, which is to the left.

In Part c, a decrease in volume will shift the equilibrium to the side with fewer moles of gas, which is to the right.

Learn more about moles at: https://brainly.com/question/23991631

#SPJ11

e6a.5(a) write the equilibrium constant for the reaction p4(s) 6h2(g) ? 4ph3(g), with the gases treated as perfect.

Answers

Equilibrium constant for the reaction P[tex]_4[/tex](s) + 6H[tex]_2[/tex](g) → 4PH[tex]_3[/tex](g) with the gases treated as perfect is K = [tex][PH_3]^4 / [H_2]^6[/tex]

To write the equilibrium constant for the reaction P[tex]_4[/tex](s) + 6H[tex]_2[/tex](g) → 4PH[tex]_3[/tex](g) with the gases treated as perfect, we'll follow these steps:

1. Identify the balanced chemical equation: P[tex]_4[/tex](s) + 6H[tex]_2[/tex](g) → 4PH[tex]_3[/tex](g)
2. Recognize that the equilibrium constant (K) is the ratio of the concentrations of the products to the concentrations of the reactants, each raised to the power of their stoichiometric coefficients.
3. Write the equilibrium constant expression for this reaction: K = [tex][PH_3]^4 / ([P_4] * [H_2]^6)[/tex]

As P[tex]_4[/tex] is solid, its concentration remains constant and doesn't affect the equilibrium. Therefore, we can simplify the equilibrium constant expression to:

[tex][PH_3]^4 / [H_2]^6[/tex]

In this expression, K represents the equilibrium constant, [PH[tex]_3[/tex]] represents the concentration of PH[tex]_3[/tex] at equilibrium, and [H[tex]_2[/tex]] represents the concentration of H[tex]_2[/tex] at equilibrium. The gases are treated as perfect in this case, so the ideal gas law can be applied to calculate their concentrations if needed.

Learn more about equilibrium constant here:

https://brainly.com/question/31321186

#SPJ11

this is the bromination (green chemistry) labis to convert acetanilide to p-bromoacetanilide using a green chemistry procedure.please include the balanced equation for the reaction and the mechanism for halogenation of acetanilide.balanced equation for the reaction:

Answers

The balanced equation for the bromination of acetanilide to form p-bromoacetanilide is as follows:

C6H5NHCOCH3 + Br2 -> C6H4BrNHCOCH3 + HBr

This equation represents the reaction of acetanilide (C6H5NHCOCH3) with bromine (Br2) to produce p-bromoacetanilide (C6H4BrNHCOCH3) and hydrogen bromide (HBr) as a byproduct.

Mechanism for the Halogenation of Acetanilide:

The bromination of acetanilide follows an electrophilic aromatic substitution mechanism. Here is a simplified overview of the mechanism:

Step 1: Generation of the Electrophile

Bromine (Br2) reacts with a Lewis acid catalyst, such as iron (III) bromide (FeBr3), to form an electrophilic species, known as the bromonium ion (Br+). The iron (III) bromide catalyst helps facilitate the reaction by accepting a lone pair of electrons from bromine, forming FeBr4-.

Step 2: Attack of the Aromatic Ring

The electron-rich aromatic ring of acetanilide undergoes nucleophilic attack by the bromonium ion. One of the carbon atoms in the bromonium ion bonds with the ortho or para position of the aromatic ring.

Step 3: Rearrangement (Ring Opening)

The attack of the aromatic ring by the bromonium ion causes a rearrangement of the bonds, leading to the opening of the bromonium ion and the formation of a carbocation intermediate. The bromine is now attached to the ortho or para position of the aromatic ring.

Step 4: Deprotonation

A base (such as water or the conjugate base of the catalyst) deprotonates the carbocation intermediate, resulting in the formation of p-bromoacetanilide and regenerating the catalyst.

Overall, the bromination of acetanilide involves the substitution of one of the hydrogen atoms on the aromatic ring with a bromine atom, resulting in the formation of p-bromoacetanilide.

To know more about bromoacetanilide refer here

https://brainly.com/question/31424387#

#SPJ11

Use the Cahn-Ingold-Prelog rules to rank the following groups in terms of priority 2. Use the Cahn-Ingold-Prelog rules to rank the following groups. In terms of priority 3. Use the Cahn-Ingold-Preiog rules to rank the following groups in terms of priority

Answers

The correct order of ranking according to  Cahn-Ingold-Prelog rules is as follows: NH₂, CH₂OH, D, H.

Cahn, Ingold, and Prelog formulated a rule to specify the arrangement of the atoms or groups that are present in an asymmetric molecule. This rule is called a Cahn-Ingold-Prelog system. This system is generally used in the R, S system of nomenclature.

According to this rule, such an atom that is directly linked to the asymmetric carbon atom is given the highest priority that has the highest atomic number. So here  Nitrogen atom of  NH₂ molecule is given the highest priority because Nitrogen has 7 atomic numbers. Carbon atom of  CH₂OH molecule  has 6 atomic number. So it is given 2nd position. Deuterium and Hydrogen have 2 and 1 atomic numbers respectively so the are given 3rd and 4th order respectively.                                    

To know more about  Cahn-Ingold-Prelog here

https://brainly.com/question/24198941

#SPJ4

The complete question should be

Rank the following groups in terms of their priority according to the Cahn-Ingold-Prelog system of priorities. Give the highest ranking group a priority of 1 and the lowest ranking group a priority of 4.

a. D

b. H

c. NH₂

d. CH₂OH        

O2 gas has a pressure of 5. 3 atm, and N2 gas has a pressure of 21. 4 atm. What is the total pressure of the gases in the container?

Answers

To use Dalton's Law of Partial Pressures, which states that the total pressure exerted by a mixture of gases is the sum of the partial pressures of each individual gas.

The sum of the partial pressures of the various gases determines the overall pressure that a mixture of gases exerts. The partial pressure law of Dalton states that The sum of the partial pressures of the various gases determines the overall pressure that a mixture of gases exerts.

mathematical formula:

P(total) = P(P1 + P(P2 +..P(n))

P1 = One gas's partial pressure

P2 is the second gas's partial pressure.

Pn is the partial pressure of n gases.

For instance:

P(he) + P(ne) = P(total)

P(total) = 2 plus 4 atmospheres.

P(total) equals 6 atm.

Partial pressure of O2 gas (PO2) = 5.3 atm

Partial pressure of N2 gas (PN2) = 21.4 atm

To calculate the total pressure (PT), we simply add the partial pressures:

PT = PO2 + PN2

PT = 5.3 atm + 21.4 atm

PT = 26.7 atm

Therefore, the total pressure of the gases in the container is 26.7 atm.

Learn more about Dalton's Law of Partial Pressures here

https://brainly.com/question/14119417

#SPJ11

Use the standard reaction enthalpies given below to determine ΔH°rxn for the
following reaction: 2NO(g) + O2(g) → 2NO2(g) ΔH°rxn = ? (6 Pts.)
Given: N2(g) + O2(g) → 2NO(g) ΔH°rxn = +183 kJ
½ N2(g) + O2(g) → NO2(g) ΔH°rxn = +33 kJ

Answers

The ΔH°rxn for the reaction: [tex]2NO(g) + O_2(g) = 2NO_2(g)[/tex] is +102 kJ.

To find ΔH°rxn for the reaction: [tex]2NO(g) + O_2(g) = 2NO_2(g)[/tex], we need to use the given standard enthalpies of formation and/or standard enthalpies of reaction. Since the given enthalpies are for the formation or decomposition of different species, we need to use some algebra to manipulate the equations in order to cancel out the intermediates.

First, we can write the given equation for the formation of [tex]NO_2:[/tex]

[tex]1/2 N_2(g) + O_2(g) = NO_2(g)[/tex] ΔH°rxn = +33 kJ

We can then multiply this equation by 4 to get rid of the 1/2 coefficient:

[tex]2N_2(g) + 2O_2(g) = 4NO_2(g)[/tex] ΔH°rxn = +132 kJ

Next, we can use the given equation for the formation of NO:

[tex]N_2(g) + O_2(g) = 2NO(g)[/tex] ΔH°rxn = +183 kJ

We can then multiply this equation by 2 to get rid of the coefficient of 2 in the final equation:

[tex]2N_2(g) + 4O_2(g) = 4NO(g)[/tex] ΔH°rxn = +366 kJ

Now, we can combine the two equations above to cancel out the NO intermediates:

[tex]2N_2(g) + 4O_2(g) = 4NO(g)[/tex] ΔH°rxn = +366 kJ

[tex]4NO(g) + 2O_2(g) = 4NO_2(g)[/tex] ΔH°rxn = -264 kJ

If we add these two equations together, we get the desired equation:

[tex]2N_2(g) + 6O_2(g) = 4NO_2(g)[/tex] ΔH°rxn = +102 kJ

For more question on reaction click on

https://brainly.com/question/29470602

#SPJ11

The enthalpy change for the reaction 2NO(g) + O2(g) → 2NO2(g) can be calculated using Hess's law by subtracting the enthalpy change of the intermediate reaction from the enthalpy change of the target reaction.

ΔH°rxn for the target reaction = (2 x ΔH°rxn of reaction 2) - (ΔH°rxn of reaction 1)

Substituting the given values, we get:

ΔH°rxn = (2 x (+33 kJ)) - (+183 kJ)

ΔH°rxn = -117 kJ

Therefore, the enthalpy change for the reaction 2NO(g) + O2(g) → 2NO2(g) is -117 kJ. This means that the reaction is exothermic and releases 117 kJ of energy per mole of reaction.

The negative sign indicates that the reaction releases heat to the surroundings.

Learn more about Hess's law here :

https://brainly.com/question/31508978

#SPJ11

in the 1h nmr spectrum of most aromatics, the aromatic protons appear ~7-8 ppm. the 1h nmr of ferrocene shows only 1 peak at 4.15 ppm – what factors cause this upfield shift

Answers

The upfield shift in the 1H NMR spectrum of ferrocene, with its single peak at 4.15 ppm, is primarily due to the shielding effect caused by the presence of the delocalized electron cloud in the ferrocene molecule.

Ferrocene is a unique compound with an iron atom sandwiched between two cyclopentadienyl rings. The cyclopentadienyl rings form a delocalized electron cloud through pi-bonding, which creates an unusually strong shielding effect for the protons in the molecule. This shielding effect causes the protons to experience a reduced magnetic field, resulting in an upfield shift of their resonance frequency. This is why the 1H NMR spectrum of ferrocene shows only one peak at 4.15 ppm instead of the typical 7-8 ppm range observed for most aromatic protons.

The upfield shift observed in the 1H NMR spectrum of ferrocene is due to the shielding effect created by the delocalized electron cloud in the molecule, which results in a reduced magnetic field experienced by the protons and consequently, a single peak at 4.15 ppm.

To know more about upfield shift, click here

https://brainly.com/question/30727692

#SPJ11

Other Questions
An increase in Japan's demand for United States goods would cause the value of the dollar toA. depreciate because of inflationB. depreciate because the United States would be selling more dollars to JapanC. depreciate because the United States money supply would increase as exports riseD. appreciate because Japan would be buying more United States dollarsE. appreciate because Japan would be selling more United States dollars which of the following tends to lessen and shorten recession associated with anti-inflation policies of a central bank? according to the operant conditioning theory, people learn to behave in ways that lead to desirable outcomes and they learn ______. a. find the 30th percentile for the standard normal distribution b. find the 30th percentile for a normal distribution with mean 10 and std. dev. 1.5 Write a review (or reflection) of the book This I Believe. In it, you will cite one or two of the essays, and either the Forward, the Introduction, or the original Introduction by Edward R. Murrow (Appendix A, page 269). Use the points you select (from the essays, Forward or Introductions) to discuss the book and to build your own interpretation and analysis of the work Why are different lines used in sketches of possible solutions given the thermodynamic data in the table below, calculate the equilibrium constant (at 298 k) for the reaction: 2 so2 (g) o2 (g) 2 so3 (g) which of the following could cause a situation where a human body has too little sodium to function properly, thereby causing dizziness, nausea, and confusion? group of answer choices eating lots of salty food urinating too frequently overconsumption of water hypothermia (below normal body temperature) becoming dehydrated When you are jogging, your muscles are using more oxygen and releasing more carbon dioxide into the blood than when you are at home on the couch. Which of the following would occur during your jog?A) The concentration of bicarbonate ions (HCO3-) in the blood would decrease.B) The volume of the dead air space would decrease.C) Blood pH would become more basic.D) The medullary respiratory center would detect rising carbon dioxide levels. she is pursuing a(n) ___ in chemistry, but she also considered professions in physics and coding. promotional messages generated by third parties, such as journalists or customers, rather than by the company or brand are known as ______ media. Let's say you (a 16-year old) open a savings account with an interest rate of 6% per year and youaren't adding any additional funds in the future. If you make $80,000 within the year you turn 60, whatis the total amount in your account at 60 years old? 9*Giovanni needs to hire a handyman to paint his house. Charles will charge him$115 up front and $30 per hour. Peter will charge $40 per hour with an $80 flat feefor paint. After how many hours will the two men charge the same amount tocomplete the job? While scholars agree that women's roles deteriorated in some respects, there were also times when they exercised considerable freedom and influence, ... if a new product makes it way through the planning process, a company will go into full production because all previous steps are successful.T/F use an xslt 2.0 processor to generate an html file named containing the completed report on rented equipment. By now, you should be in the final stages of planning your final project. it's time to make somedecisions and stick to them. Please help me with this!!! calculate the absolute value of the voltage across a biological membrane that has [na ]outside = 140 mm and [na ]inside = 12 mm, all other conditions being standard. an ideal gas with a molar mass of 40.2 g/mol has an average translational kinetic energy of 1.31020j per molecule. what is the rms speed of one molecule of this gas?