The mass, in grams, of the sample of methanol is 64 grams.
What is relation between mass and moles?Mass of any substance will be calculated by using their moles as:
n = W/M, where
W = required mass
M = molar mass = 32.0 g/mol
n = moles = 2 moles
Now we put all these value on the above equation to calculate the mass of methanol as:
W = (2mol)(32g/mol)
W = 64g
Hence, correct option is (4) i.e. 64 grams.
To know more about moles, visit the below link:
https://brainly.com/question/15374113
The answer to this question is option D: 64 grams
Explanation: Got 90% on the quiz on edge and got this answer right
A 1 kg object accelerates at a rate of 5 m/s2.
Answer:
5 N.
Explanation:
We can calculate the net force on the object by using Newton's second law of motion:
F is the net force on an object
m is the mass of the object
a is its acceleration
For the object in this problem, we have
m = 1 kg is its mass
is its acceleration
Substituting into the equation, we find the net force:
4) What type of reaction is the following?
exothermic
endothermic
not enough information given
Answer:
Endothermic
Explanation:
Notice that heat is written as part of the reactants. Therefore, heat is necessary for the reaction to proceed.
In other words, the reaction is endothermic.
Conversely, if the heat is written as part of the products, heat is released as the reaction proceeds and hence the reaction is exothermic.
What is carbon sink and how it effects our environment?
Answer:
Explanation:
Carbon sink is basically anything that absorbs carbon from the atmosphere. Particularly, the soil, trees, plants and the ocean absorb the most carbon, which helps with greenhouse emission.
1
This question is about the Earth and its atmosphere.
Figure 1 shows the Earth and its atmosphere billions of years ago.
The boiling point of water is 100°C.
Suggest one reason why there was no liquid water on the Earth's surface billions of
years ago.
Earth's early
atmosphere of:
• carbon dioxide
• water vapour
• methane
• ammonia
Answer:
water vapour
Explanation:
allow the Earth’s surface
temperature was too/very hot
or water evaporated/ boiled
or turned to steam/gas
allow because of heat from
volcanoes
ignore the Earth’s surface
was covered by volcanoes
ignore water turned to water
vapour
hello people ~
Which of the following groups contain only synthetic fibres?
A. Nylon, Terylene, Wool
B. Cotton, Polycot, Rayon
C. PVC, Polythene, Bakelite
D. Acrylic, Silk, Wool
Answer:
PVC,polythene,Bakelite
Explanation:
PVC stands for polyvinyl chloride used in pipes Polythene used as bags.Bakelite used in switches
Write 483,928 in each form.
Word:
Expanded:
6. 0.465 mole sample of gas exerts 4.43 atm of pressure in a 2.25 L container. What is the temperature of the gas in the container?
Answer:
T = 262KExplanation:
n = 0.465
P = 4.43 atm
V = 2.25 L
T = ?
Follow this equation below
PV = nRT4.43 x 2.25 = 0.465 x 0.08206 x T
9.97 = 0.038 x T
(Dividing both sides by 0.038 to get rid of it)
T = 262K or you could say 262.4K
Hope this helps!!
Electromagnetic radiation emitted from a hot object reaches it's peak at a wavelength of 8.5 x 10-7 m. What is the frequency of this radiation
Answer:
the frequency is 18
Explanation:
please mark me as the branlest hope it helps please
Which of the following properties of pure solvents increase when a solute is added?
a. Freezing point
b. Vapor pressure
c. Boiling point
d. Cohesion
reaction of ethene with H2
Answer:
The hydrogenation of ethene
Ethene reacts with hydrogen in the presence of a finely divided nickel catalyst at a temperature of about 150°C. Ethane is produced. This is a fairly pointless reaction because ethene is a far more useful compound than ethane!
Explanation:
whats the biggest thing in the whole universe
Answer:
The biggest thing in the universe is a supercluster known in the universe is the Hercules-Corona Borealis Great Wall.
Explanation:
Which of these statements accurately describes polymers?
Polymers are macromolecules.
Polymers are simple molecules.
Polymers are made of metal atoms.
Polymers contain double bonds.
Answer:
Its A.) Polymers are macromolecules
Explanation:
Answer:
The correct answer that you are looking for is A.) Polymers are macromolecules.
Pearls are made of calcium carbonate and can be broken down ( or dissolved ) by Hcl according to the following balanced equation :
CaCo3 + 2 HCl -> CaCl2 + H2O + CO2
What volume of 0.400 M HCl would be needed to dissolve a CaCO3 pearl which weighs 0.400 grams?
[tex]\boxed{\sf Molarity=\dfrac{Moles}{Vol\:in\:L}}[/tex]
Moles of CaCO_3:-
0.4/100=0.004mol1 mol Calcium carbonate need 2 mol HCl0.004 mol will need 0.004(2)=0.008mol HClCome to formula stated first
[tex]\\ \tt\Rrightarrow Volume=\dfrac{Moles}{Molarity}[/tex]
[tex]\\ \tt\Rrightarrow volume=\dfrac{0.008}{0.4}[/tex]
[tex]\\ \tt\Rrightarrow volume=0.02\ell=20m\ell[/tex]
Arrange the missing steps in the correct order.
Answer:
There's nothing to arrange l
Which statement best describes one rule for determining the relative age of a rock layers
What is the specific heat of titanium if the temperature of a 36.7 g sample of titanium is increases by
4.8 °C when 91.6 J of heat is added?
Answer:
what is the initial temperature? i can answer once I know. if it doesnt say, then I dont know and I'll delete this
Imagine a campfire on a cold day. At first, the temperature of each log is as cold as the air around it. A few hours after the fire has burned out, the temperature of the ashes will also be cold. But in between, when the fire is burning, the temperature of the logs and surrounding air is very hot. What is the source of this thermal energy? For the answer, begin by identifying the reactants and products for the overall chemical reaction of burning wood. Wood is mostly carbohydrates, the bulk of which is cellulose. Cellulose is made up of hundreds to thousands of glucose groups connectected by oxygen molecules. The chemical formula for cellulose is (C6H12O6)n, where n is the number of glucose groups. For more manageable models, carbohydrates will be modelled as glucose with a chemical formula of C6H12O6.
Answer:
See explanation
Explanation:
According to the first law of thermodynamics, energy can neither be created nor destroyed, but can be transformed from one form to another.
The thermal energy observed in the hot air while the fire rages is obtained from the chemical energy stored in carbohydrates(cellulose) that compose the wood material. As the wood is burnt, this chemical energy stored in chemical bonds of the wood material is converted to heat. The chemical reaction in the combustion of wood can be simply modeled as the combustion of n moles of glucose.
nC6H12O6(s) + 6nO2(g) ===> 6nCO2(g) + 6nH2O(g)
Note that n may even be thousands of glucose molecules that combine to form cellulose present in wood.
80+80
help
pelase
80+2-0
Answer:
the first one would be 160 and the second 82 :)
Explanation:
Answer:
160 and 82?
Explanation:
80 plus itself is 160 and 80 plus 2 is 82 minus 0 is 82.
Describe the changes in membrane permeability that occur at the point of stimulation on the axon.
Answer:
The permeability of a membrane is affected by temperature, the types of solutes present and the level of cell hydration. Increasing temperature makes the membrane more unstable and very fluid.
Explanation:
Can someone please help me? :(
Answer:
B and D
Explanation:
They collect equal amounts.of solar energy
Answer:
The answer is
C. B and D
Explanation:
The equator is where there is the most solar energy
B and D are symmetrical over the equator.
How does stoichiometry support the law of conservation of mass?
A It compares the mass of the reactants to the number of moles of reactants.
B It compares the mass of each reactant to the mass of each product.
C It compares the mass of the products to the number of atoms in the products.
D It compares the mass of the products to the mass of the reactants. ***
The stoichiometry supports the law of conservation of mass by comparing the mass of the products to the mass of the reactants.
What is stoichiometry?Stoichiometry is the measurement of the reactant and product of a reaction.
It is found in the law of conservation of mass, which says that the mass of the reactant is equal to the mass of the product.
Due to stoichiometry, if the mass of the product is known then, the mass of the reactant can be known.
Thus, the correct option is D.
Learn more about stoichiometry
https://brainly.com/question/9743981
Which term is defined as the sum of protons and neutrons in an atom.
Answer:
Mass number
Explanation:
how many grams of baf2 are in 3.7 moles of baf2
To convert moles to gram multiply 3.7 moles of BaF2 to the molar mass of BaF2
BaF2 molar mass = 175.326
3.7 moles x 175.326g = 648.70g BaF2
1. Why is sodium kept immersed in keroscne oil?
Explanation:
Sodium and Potassium are highly reactive metals and react vigorously with the oxygen, carbon dioxide and moisture present in the air such that it may even cause a fire. To prevent this explosive reaction, Sodium iskept immersed in kerosene becauseSodium doesn't react with kerosene
A chemist wants to extract copper metal from copper chloride solution. The chemist places 1.50 grams of aluminum foil in a solution of 14 grams of copper (II) chloride. A single replacement reaction takes place. What best explains the state of the reaction mixture after the reaction?
Unbalanced equation: CuCl2 + Al → AlCl3 + Cu (4 points)
Group of answer choices
Less than 6.0 grams of copper is formed, and some aluminum is left in the reaction mixture.
More than 6.5 grams of copper is formed, and some aluminum is left in the reaction mixture.
Less than 6.0 grams of copper is formed, and some copper chloride is left in the reaction mixture.
More than 6.5 grams of copper is formed, and some copper chloride is left in the reaction mixture.
Less than 6.0 grams of copper is formed, and some aluminum is left in the reaction mixture
Stoichiometric calculationsFrom the equation of the reaction:
3CuCl2 + 2Al → 2AlCl3 + 3Cu
Mole ratio of CuCl2 and Al = 3:2
Mole of 1.5 g aluminum foil = 1.5/26.98
= 0.06 moles
Mole of 14 g CuCl2 = 14/134.45
= 0.10 moles
For every 3 moles of CuCl2, 2 mole of Al is needed.
Thus, for 0.10 moles of CuCl2, the mole of Al needed would be:
0.10 x 2/3 = 0.07 moles
CuCl2 is, thus, slightly in excess while Al is the limiting reagent.
Mole ratio of Al and Cu = 2:3
For 0.06 mole Al, the mole of Cu will be: 0.06x3/2 = 0.09 moles
Mass of 0.09 moles Cu = 0.09 x 63.55
= 5.71 g
Thus, less than 6.0 grams Cu is formed while a little CuCl2 would be left in the reaction mixture.
More on stoichiometric calculations can be found here: https://brainly.com/question/8062886
How many copper atoms are in a pure copper statue with a mass of 198 kg?
Answer:
No.of copper atoms= no.of moles x No x atomicity
(No - avagardro's number )
= wt / atomic mass x No x 1
= 198 x 10 ^3 g / 63.5 x No
= 3.118 x 10^3 x 6.02 x 10^23
= 18.77 x 10^26 atoms.
Read this excerpt from the play An Adventure for Detective Dennis:
Stars twinkle in the windows of the library.
What element of a play is shown in this text?
Cast of characters
Dialogue
Scene
Setting description
Answer:
the answer is Scene
Explanation:
because it is describing the atmosphere of where the book/play is taking place
Answer:
the answer is Scene
Explanation:
which of the following provides the best analogy for an electron in an atomic orbital
Answer:
a
Explanation:
the answer is a i'm pretty sure it might be wrong tho i'm sorry
A student dissolves 73 g of sodium nitrate, NaNO3, in 100 mL of water and observes a clear, colorless
solution. The student begins to add more sodium nitrate to the solution and it instantly becomes a cloudy,
heterogeneous mixture. The original solution the student prepared is best described as
unsaturated
saturated
immiscible.
supersaturated
How many moles of molecular oxygen will be needed for
the complete combustion of 100.0 g of sulfur dioxide? The product of this reaction
is sulfur trioxide.
A. 0.7804 moles
B. 1.561 moles
C. 0.641 moles
D. 1.281 moles
Answer:
The answer is A. 0.7804 moles