A chemical supply company sells sulfuric acid (H2SO4) in a concentration of 4.00 M. What volume of this solution would you need to make 12.0 mL of a 0.50 M H2SO4 solution

Answers

Answer 1

you need 3.00 mL of the 4.00 M sulfuric acid solution to make 12.0 mL of a 0.50 M solution.

What is Solution?

Solution is a way to solve a problem or address an issue. It can involve finding an answer or coming up with a strategy to tackle a difficult situation. Solutions can be found through research, brainstorming, trial and error, or by using existing resources.

To solve this problem, we must use the equation:
V1C1 = V2C2
Where V1 is the volume of the concentrated solution, C1 is the concentration of the concentrated solution, V2 is the volume of the dilute solution, and C2 is the concentration of the dilute solution.
In this case, V1 is the volume of the 4.00 M solution that we need, C1 is 4.00 M, V2 is 12.0 mL, and C2 is 0.50 M.
Plugging these values into the equation, we can solve for V1:
V1 = (V2C2) / C1
V1 = (12.0 mL)(0.50 M) / (4.00 M)
V1 = 3.00 mL

To learn more about Solution
https://brainly.com/question/25326161
#SPJ4


Related Questions

Why do the electrons stay in between the nuclei of the two hydrogen atoms chemthink

Answers

Electrons stay in between the nuclei of the two hydrogen atoms because they are attracted to the positive charge of the nuclei.

Electrons are negatively charged species, so they are attracted towards the positive charge of a nucleus.

In hydrogen atom, when both the two hydrogen atoms get close to each other then the electrons of each atom will get attracted to both the nuclei. And if both the hydrogen atoms come close to each other they will repel each other.

The energy of the two hydrogen atoms becomes less when  they are together than when they are far apart.

Thus, the electrons tend to stay in between the nuclei of the two hydrogen atoms.

To know more about nuclei of two hydrogen atoms here

https://brainly.com/question/13570570

#SPJ4

Why are the elements in Groups 1 and 17 so reactive?

Answers

Fluorine as well as chlorine are among the substances in group 17. Alkali metals as well as hydrogen are both part of group 1 on the periodic table.

Group 1 elements were extremely reactive due to the fact that they only contain one valence electron. As just a result, atoms were only ever combined with some other elements present in nature.

Due to their size as well as low ionisation enthalpy, alkali metals were extremely reactive metals. Moving lower in the group causes them to become more reactive. Reactivity to air: These metals discolor when exposed to dry air because oxides create, which then react with moisture to generate hydroxides.

To know more about Reactivity

https://brainly.com/question/1598581

#SPJ4

Solid silicon and solid magnesium chloride form when silicon tetrachloride gas reacts with magnesium metal. Write a word equation and an unbalanced formula equation including physical states.

Answers

Solid silicon and solid magnesium chloride form when silicon tetrachloride gas reacts with magnesium metal. the equation is :

SiCl₄(g)  +  Mg(s)   --->  Si(s)  +  MgCl₂(s)

When the solid silicon react with the solid magnesium chloride , the word equation is :SiCl₄(g)  +  Mg(s)  

the product formed is the silicon tetrachloride gas. the word equation is :

Si(s)  +  MgCl₂(s)

The unbalanced equation is :

SiCl₄(g)  +  Mg(s)   --->  Si(s)  +  MgCl₂(s)

The balanced equation for the reaction of the silicon tetra chloride react with the magnesium   and form the silicon  and the solid magnesium chloride.  and t is given :

SiCl₄(g)  +  Mg(s)   --->  Si(s)  +  MgCl₂(s)

To learn more about silicon here

https://brainly.com/question/2571347

#SPJ4

Which of the following are commonly used oxidizing agents? Select all that apply. O Hydrochloric add O Sodium dichromate O Chromic acid O Sodium borohydride

Answers

Sodium dichromate and chromic acid are commonly used as oxidizing agents.

Oxidizing agents are the compounds that can either accept hydrogen or electrons from the other molecules. It is a element or compound which participates in a oxidation-reduction reaction and accept electrons from the different species.  By the acceptance of electrons from other substances, oxidizing agents cause their oxidation states to become more positive. Oxidizing agents are reduced as well. They can also transfer oxygen atoms to the molecules in some of the cases. Sodium dichromate and chromic acid are used to oxidize the other inorganic salts as well as alcohols.

Hydrochloric acid is a strong acid as well as sodium borohydride is a strong reducing agent.

To know more about oxidizing agents here

https://brainly.com/question/10547418

#SPJ4

How many moles are in 4.0 x 10^24 atoms of silicon?

Answers

Atoms of silicon have 0.15 moles.

[tex]4.0 × 10^2^4[/tex] atoms of silicon.

We have to find the number of moles.

Silicon has the atomic number 14.

One mole of silicon contains [tex]6.023× 10^2^3[/tex] atoms.

[tex]6.023× 10^2^3[/tex]number of atoms are present in one mole of silicon.

[tex]4.0*10^24[/tex]number of atoms will have-

[tex]6.023*10^2^3/4.0*10^2^4=0.15[/tex] moles.

         

Thus atoms of silicon have 0.15 moles.

Learn more about how to find atoms of silicon here:brainly.com/question/29769911

One mole of methane (CH4) and one mole of oxygen (O 2) would have the same number of atoms. Question 9 options: True False

Answers

This statement is false.

One mole of methane (CH4) contains one atom of carbon and four atoms of hydrogen, for a total of five atoms. On the other hand, one mole of oxygen (O2) contains two atoms of oxygen, for a total of two atoms. Therefore, one mole of methane and one mole of oxygen do not have the same number of atoms.

It's important to note that a mole is a unit of measurement that corresponds to the Avogadro's number of atoms, ions or molecules of a substance, which is 6.022 x 10^23 atoms, ions or molecules. That means that one mole of a substance has the same number of atoms, ions or molecules but not always the same number of elements.

Learn more about Avogadro's number here: https://brainly.com/question/11907018

#SPJ4

Your lab group accidentally leaves a beaker of 1.00 \space M1.00 M \ce{NaOH}NaOH solution out on the lab table overnight and its volume is decreased to one third the original from evaporation, what is the new molarity

Answers

One of the lab groups unintentionally left a beaker with 1.00 M1.00 M of NaOH solution out on the lab table over night. The molarity of the solution is 3.00 M after evaporation.

The total moles of solute contained in a given volume of solution is referred to as a solution's molarity. In this case, "M" stands for molarity, "n" is the number of moles of solute present in the solution, and "V" is the volume of solution present in a container. A unique kind of homogenous mixture made up of two or more components is known as a solution in chemistry. A solute, or substance that is dissolved in a solvent, is one of the components of such a mixture.

Moles = 1.00/1/3 Moles = 3.00 M

Learn more about molarity here

https://brainly.com/question/8732513

#SPJ4

How many ATP are directly generated in the Krebs cycle when 2 molecules of glucose are oxidized?

Answers

4 ATP molecules are directly generated in the Krebs cycle when 2 molecules of glucose are oxidized

How Krebs cycle move to produce glucose molecule?

The Krebs cycle,  TCA cycle or the citric acid cycle, is a series of enzyme-catalyzed reactions occurring  in the mitochondrial matrix and involves the oxidation of acetyl-CoA.

The acetyl group of acetyl-CoA is oxidized to make two molecules of CO2 in a succession of eight steps, while also producing one ATP. Additionally, reduced high-energy molecules like NADH and FADH2 are created.

Each glucose molecule produces two acetyl-CoA molecules, the Krebs cycle must  move twice for one glucose molecule to produce the four CO2, six NADH, two FADH2, and two ATPs.

For more information on ATP visit: https://brainly.com/question/14637256

#SPJ4

How many ATP does ATP produce?

Answers

The bulk of ATP production occurs during cellular respiration within the mitochondrial matrix, producing around thirty-two ATP molecules for every molecule of oxidized glucose.

What is ATP?

The energy currency of the cell is ATP (adenosine triphosphate). It is a natural chemical molecule made up of phosphate groups, adenine, and the sugar ribose. These molecules supply energy to the body's many metabolic operations. Therefore, it is dubbed "Energy Currency of the Cell". ATP can be utilized to store energy for future reactions or it can be used to pay for reactions when the cell need energy. Animals use ATP to store the energy received from food breakdown. Similarly, plants use ATP molecules to collect and store the energy they receive from light during photosynthesis.

Here,

The majority of ATP is produced during cellular respiration within the mitochondrial matrix, which produces around thirty-two ATP molecules for every molecule of oxidized glucose.

To know more about ATP,

https://brainly.com/question/14637256

#SPJ4

A mixture contains only NaCl and Al2(SO4)3. A 1.68-g sample of the mixture is dissolved in water and an excess of NaOH is added, producing a precipitate of Al(OH)3. The precipitate is filtered, dried, and weighed. The mass of the precipitate is 0.116 g. What is the mass percent of Al2(SO4)3 in the sample

Answers

The precipitate is collected, filtered, dried, and weighed.. The mass of the precipitate is 0.116 g.

What is dissolved?

Dissolved refers to a solute that is completely dissolved in a solvent, resulting in a homogeneous mixture. When a solute, such as a salt, is dissolved in a solvent, such as water, the molecules of each component are dispersed evenly throughout the mixture. This process can be reversed by evaporating the solvent, leaving the solute behind. The amount of solute that can be dissolved in a particular solvent is known as its solubility.

Mass of Al2(SO4)3= Mass of sample- Mass of precipitate
Mass of Al2(SO4)3= 1.68-0.116=1.564 g
Percent of Al2(SO4)3= (1.564/1.68)*100= 93.45 %

To learn more about Dissolved
https://brainly.com/question/2078413
#SPJ4

When your hand blocks your view of the lamp, where does the shadow of your hand fall?


Please help this is due today and I really need help

Answers

Answer:

on your face

Explanation:

because when the light is falling on your hand (which already blocked your view of the lamp) then the shadow will fall on your face

A polymer has a relative molecular mass of 112000.Calculatethe number of monomers{C=12, H=1}​

Answers

The number of monomers in a polymer with a relative molecular mass of 112000 is calculated as

112000/ (12 x C + 1 x H) = 9333.3

Therefore, the number of monomers in the polymer is 9333.3.

:)

What physical property is characteristic of all of the elements in the group 18 of the periodic table?

Answers

The quantity of electrons inside the valence (outermost) shells as well as the electron configurations among elements belonging to the identical group are identical. They display comparable chemical characteristics.

Noble gases were low chemically reactive, odourless, colourless, nonflammable, as well as monotonic gases. Noble gases are exceedingly stable as well as uncommon to form chemical connections since they have minimal inclination to receive or lose electrons, thanks to the complete valence electron shells of such atoms.

These gases don't receive, lose, or share electrons, making them inert as well as unreactive. They are often referred to as noble gases due to their rarity inside the atmosphere of the earth.

To know more about Noble gases

https://brainly.com/question/11764545

#SPJ4

How can you deduce if a compound is optically active or not ?​

Answers

Answer:

look for evidence that the molecules are chiral.

Explanation:

The instrument with which optically active compounds are studied is a polarimeter, shown in the figure below. Imagine a horizontal line that passes through the zero of a coordinate system.

calculate the solubility of AgCN in a solution containing 1.0M H Ksp of AgCN is 2.2e-12 Ka of HCN is 6.2e-10

Answers

The solubility of AgCN in a solution containing 1.0M H Ksp of AgCN is 2.2e-12 Ka of HCN is 6.2e-10 is 5.9 x 10^-2M.

Given concentration of H+ (M) = 1.0M

Ksp of AgCN = 2.2e-12

Ka  of HCN = 6.2e-10

AgCN ⇋ Ag+ +CN− ................Ksp

CN − + H+ ⇋ HCN................... 1/Ka​

AgCN + H+ ⇋ HCN + Ag+ ...................Ksp/Ka = K0

K0 = 2.2e-12/6.2e-10 = 0.0035 = 35 x 10-4

At Equilibrium:   AgCN + H+ ⇋ HCN + Ag+

Let the moles of [Ag+] = x

So the number of moles of [HCN] = x

K0 = [Ag+] [HCN] / [H+]

35 x 10-4 = x^2/1

x = 5.9 x 10^-2M

Hence the molar solubility of AgCN in buffer solution is 5.9 x 10^-2M.

To learn more about solubility click here https://brainly.com/question/28170449

#SPJ4

Has 13 protons and 14 neutrons what is its mass number?

Answers

An atom that has 13 protons and 14 neutrons will have mass number 27.

Rutherford demonstrated that an atom's nucleus, which is made up of protons and neutrons, contains the vast bulk of the atom's mass. The total number of protons and neutrons in an atom is referred to as the mass number. The number of protons(atomic number) and neutrons and their sum can be used to compute it.

We know that,

Mass number = Number of protons + Number of neutrons

= 13 + 14 = 27.

The mass number  is 27.

Therefore  an atom that have 13 protons and 14 neutrons will have mass number 27.

Learn more about mass number at https://brainly.com/question/14089559

#SPJ4

a reaction such as A+B -> products that exhibits second-order kinetics can be studied using a large excess of one reactant. Under these conditions, the concentration of the reactant in excess will not change much during the reaction, which will exhibit _________-first-order kinetics.

Answers

a reaction such as A+B -> products that exhibits second-order kinetics can be studied using a large excess of one reactant. Under these conditions, the concentration of the reactant in excess will not change much during the reaction, which will exhibit pseudo-first-order kinetics.

A fraud or imposter is defined as something or someone that is false but attempts to pass for the real deal. Although it's typically a prefix, pseudo can refer to a faker. A pseudo-intellectual, for instance, will attempt to persuade you that he has a brilliant mind despite the fact that he does not. The fame of a pseudo-celebrity is minimal. A combining form with the meaning "false," "pretended," or "unreal," used in the creation of compound words (pseudo classic; pseudointellectual); in science, designating a close or deceptive resemblance to the following element (pseudobulb; pseudocarp); and occasionally used in the chemical names of isomers (pseudoephedrine). a person who professes to be skilled in academic or creative endeavours but lacks in-depth comprehension or critical thinking. a person who exaggerates their intelligence and engages in intelligence fraud.

Learn more about pseudo here

https://brainly.com/question/26905120

#SPJ4

Convert the following numbers into the standard form of scientific notation 0. 010x 10e5

Answers

The standard form of scientific notation for 0. 010x 10e5 is 1.0 × 10^3.

Scientific notation is a form of presenting large numbers or very small numbers in a simpler form.

There are some rules to write scientific notation:

The base should be always 10. The exponent must be a non-zero integer.

Absolute value of the coefficient should be greater than or equal to 1 but it should be less than 10.The mantissa carries the rest of the significant digits of the number.

The power of 10 will be positive, if the given number is multiples of 10 then the decimal point has to move to the left. The power of 10 will be negative If the given number is smaller than 1 and then the decimal point has to move to the right.

If you need to learn more about scientific notation, click here

https://brainly.com/question/18073768?referrer=searchResults

#SPJ4

Suppose that 20 mL of 2.50 x 10^-2 M aqueous H 2 SO 4 is required to neutralize 10.0 mL of an aqueous solution of KOH. What is the molarity of the KOH solution

Answers

The molarity of KOH solution  will be 0.75 M.

The amount of moles of solute per liter of solution is known as molarity (M). Molarity is defined as moles of solute per liter of solution. To ascertain the concentration of an identified analyte, titration is a typical laboratory technique for quantitative chemical analysis. A standard solution with a known concentration and volume is prepared as the reagent, also known as the titrant or titrator.

The balanced equation is

[tex]H_{2} SO_{4}[/tex]+ 2KOH = [tex]2H_{2} O[/tex]+  [tex]K_{2} SO_{4}[/tex]

2.50 x [tex]10^{-2}[/tex] M= [tex]\frac{x}{0.2 L}[/tex]

So, 0.75 M KOH.

So, The molarity of KOH solution  will be 0.75 M.

Learn more about Molarity

brainly.com/question/13601876

#SPJ4

What happens when ocean water that is more dense (colder or saltier) is mixed with water that is less dense (warmer or less salty)?

please make it sound like i wrote it :(

Answers

When ocean water that is more dense (colder or saltier) is mixed with water that is less dense (warmer or less salty), the denser water will sink to the bottom and the less dense water will rise to the top. This is known as stratification, and it helps to create distinct layers in the ocean.

This stratification can create an environment that is more conducive to life, as it allows different types of organisms to inhabit different layers of the ocean.

The different layers of the ocean created by stratification play a significant role in the global climate system. Colder, denser waters are usually found at the bottom of the ocean, while warmer, less dense waters are found near the surface.

This temperature difference creates a natural convection system that drives currents throughout the ocean, which helps to regulate temperatures on a global scale. Additionally, stratification can also affect the amount of oxygen in the ocean.

Learn more about density of the ocean:

https://brainly.com/question/28819040

#SPJ4

what happens to the speed of a sound wave from an underwater animal as the sound passes into the air above?

A. It stays the same
B. It falls to zero
C. It decreases
D. It increases

Answers

c. it decreases .
i believe so.

Oil of vitriol is a substance that humankind has known of for thousands of years! Today the substance is known by it's scientific name sulfuric acid and has the molecular formula H2SO4. What is the molar mass of H2SO4

Answers

The molar mass of H2SO4 is 98.08 g/mol. It is a combination of hydrogen with molecular weight of 1g, sulfur with 32g and oxygen with 16g and the total combination is 2x1+1x32+4x16 = 98g.

Humanity has been aware of oil of vitriol for thousands of years. The chemical name for this material is sulfuric acid, and its molecular formula is H2SO4. It is made up of sulfur, oxygen, and hydrogen molecules. Strong and hygroscopic sulfuric acid (H2SO4) has oxidizing and hygroscopic characteristics. Because it was made by roasting "green vitriol" (iron(II) sulfate) in an iron retort, sulfuric acid was known as "oil of vitriol" by medieval European alchemists. Due to its oily appearance and occurrence in vitreous or glassy substances like ferrous sulphate and alum, it is also known as the "oil of vitriol."

To learn more about sulfuric acid click here https://brainly.com/question/29303579

#SPJ4

What is the relative rate of diffusion of CH4 and NO2?

Answers

The ratio of effusion rates of Sulphur dioxide and methane is 0.5

To calculate the rate of diffusion of gas, we use Graham's Law.

This law states that the rate of effusion or diffusion of gas is inversely proportional to the square root of the molar mass of the gas. The equation given by this law follows the equation:

Rate of Diffusion ∝ 1 ÷ √molar mass of the gas

We are given:

Molar mass of Sulphur dioxide = 64.066 g/mol

Molar mass of methane = 16.04 g/mol

By taking their ratio, we get:

Rate of SO₂ ÷ Rate of CH₄ = √MCH₄ ÷ √MSO₂

Rate of SO₂ ÷ Rate of CH₄ = √16.04 ÷ √64.066

Rate of SO₂ ÷ Rate of CH₄ = 0.5

Hence, the ratio of rate of effusion of Sulphur dioxide and methane will be 0.5

A group of students is making paper airplanes. They think that the kind of paper and the design of the airplane may affect how far each paper airplane flies. The students first test if the kind of paper affects how far the airplane flies. They make several airplanes out of different kinds of paper, using the same design. Why is it important that all the airplanes have the same design? (SC. 6. N. 1. 1)



By using the same design, the students can learn about both the effect of the design and the effect of the paper.



By using the same design, the students can learn about the effect of the design.



If they do not use the same design, the students cannot learn about the effect of the paper.



It is NOT important for the airplanes to have the same design because the students are not testing the effect of the design

Answers

Students can learn about the impact of both the design and the paper by working with the same layout. Students can learn about causality in design by replicating it and seeing its effects firsthand. The pupils won't get the full benefit of the paper unless they all follow the same format. There is no need for uniformity in airplane design since pupils will not be comparing the performance of different planes.

For the first test, students conduct an experiment to evaluate whether or not different types of paper affect the airplane's range of flight. Therefore, in the first experiment, the distance the paper travels after being thrown is the dependent variable and the type of paper is the independent variable.

The airplane's design is kept constant so that any differences in flight distance can be attributed to variations in the paper used in the experiment.

To know more about this problem:

https://brainly.com/question/19190155

#SPJ4

which of the following molecules has the most polar bond between the bonded atoms in terms of greatest and hf hcl hbr hl

Answers

HCl is the most polar due to the high electronegativity of Cl.

Hydrogen chloride is a diatomic molecule, composed of a hydrogen atom, H, and a chlorine atom, Cl, joined by a polar covalent bond. The bond is a polar covalent bond because the chlorine atom is much more electronegative than the hydrogen atom.

Positively charged protons in the nucleus attract negatively charged electrons. As the number of protons in the nucleus increases, the electronegativity, or attractive force, increases. Therefore, electronegativity increases in a row from left to right on the periodic table.

Learn more about electronegativity visit:

brainly.com/question/17762711

#SPJ4

What is the height of a column of water which can be supported by a pressure of exactly 1 bar (=100 kPa = 750.0 mmHg) at 25 ℃?

Answers

Answer:

10.33 meters (33.78 feet).

Explanation:

1 bar = 10.33 mH₂O, 1 mH₂O = 0.098 bar, hence 10.33 mH₂O/0.098 bar = 10.33 m.

What does the World Skin Cancer Map tell you about how the skin cancer rates of Australia and Brazil differ?

Answers

The World Skin Cancer Map shows that Australia has much higher skin cancer rates than Brazil. In Australia, an estimated 5.4 out of 100 people will develop melanoma in their lifetime, compared to 0.4 out of 100 in Brazil.

What is Skin Cancer?

Skin cancer is a type of cancer that affects the skin cells. It is caused by over-exposure to ultraviolet (UV) radiation from the sun and sun beds. It is the most common type of cancer in the United States, and can affect anyone, regardless of age, gender, or skin color. It is very important to protect your skin from the sun by using sunscreen.

Australia also has higher rates of non-melanoma skin cancer, with estimated rates of 24.3 out of 100 people in Australia, compared to 5.3 out of 100 people in Brazil.

To learn more about Skin Cancer

https://brainly.com/question/13774153

#SPJ1

S3o5 chemical compound

Answers

Answer:

Stainless Steel

Explanation:

Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel

Answer:

Sulfure 3

Oxygen 5

Explanation:

The S stands for Sulfure. And the stands for Oxygen. If you meant the name then its Trisulfur Pentoxide

hopefully that's what you meant.

What is the energy of each of the following photons in kilojoules per mole? Express the energy in kilojoules per mole to three significant digits.
Part A: ν=5.95×1019s−1
Part B: ν=20.00×103s−1
Part C: λ=2.57×102m

Answers

The energy of a photon can be calculated using the formula: E = hν = hc/λ, where E is the energy, h is Planck's constant (6.626 x 10^-34 Js), ν is the frequency, c is the speed of light (2.998 x 10^8 m/s), and λ is the wavelength which is 6.53 x 10^-38 kJ/mol

Part A: ν = 5.95 x 10^19 s^-1

E = hν = (6.626 x 10^-34 Js) x (5.95 x 10^19 s^-1) = 3.948 x 10^-14 J/photon

To convert to kilojoules per mole, we need to divide by Avogadro's number (6.022 x 10^23 photons/mol)E = (3.948 x 10^-14 J/photon) / (6.022 x 10^23 photons/mol) = 6.53 x 10^-38 kJ/mol

Part B: ν = 20.00 x 10^3 s^-1

E = hν = (6.626 x 10^-34 Js) x (20.00 x 10^3 s^-1) = 1.325 x 10^-31 J/photon

To convert to kilojoules per mole, we need to divide by Avogadro's number (6.022 x 10^23 photons/mol). E = (1.325 x 10^-31 J/photon) / (6.022 x 10^23 photons/mol) = 2.20 x 10^-55 kJ/mol. Part C: λ = 2.57 x 10^2 m. E = hc/λ = (6.626 x 10^-34 Js) x (2.998 x 10^8 m/s) / (2.57 x 10^2 m) = 3.948 x 10^-14 J/photon. To convert to kilojoules per mole, we need to divide by Avogadro's number (6.022 x 10^23 photons/mol) .E = (3.948 x 10^-14 J/photon) / (6.022 x 10^23 photons/mol) = 6.53 x 10^-38 kJ/mol. In all the parts, the energy is expressed in kilojoules per mole to three significant digits.

Learn more about  Planck's constant here:

https://brainly.com/question/27389304

#SPJ4

(Question) How many atoms are in 3 grams of Cu?
(20 points)

Answers

Answer: 2.85 x 10^22

Explanation:

We can use stoichiometry to convert grams to atoms.

*Important quantities*

Original amount of Copper: 3 grams

Molar mass of Copper: 63.5 grams

Avogadro's number: 6.022x10^23 atoms/formula units/molecules

Process - [tex]\frac{3gramCu}{1}[/tex]×[tex]\frac{1 mole Cu}{63.5 gCu}[/tex]×[tex]\frac{6.022x10x^{23} }{1 moleCu}[/tex] = 2.84503937×10^22

After taking sig figs into account, the answer needs to be rounded to 3 decimal places

Final answer: 2.85 x 10^22

Other Questions
How do you calculate seed multiplication ratio? Write a par of a history of the Hittites . Must include a least 6 sentences (And the dates for each events) Project stem 2.3 code practice question 2 In a solution of seawater, salt is which of these?A. soluteB. compoundC. solventD. mixture How do you find the area of a isosceles triangle without the height? Why is the US a mixed economy? One computer in a lab is programmed to back up data at the turn of the minute every five minutes. Another computer is programmed to back up data at the turn of the minute every two minutes. Find the number of times in twenty-four hours that the two computers back up data at the same time.(Assume that the computers do not back up at the start of the 24-hour period.) which of the following is an explanation for the apparebtbincrease in the rate that the universe is expanding?a. hadronsb. dark energyc. CMB radiationd. dark matter please tell me how to solve!! Two pendulums have the same dimensions (length L) and total mass 1m2. Pendulum A is a very small ball swinging at the end of a uniform massless bar. In pendulum B, half the mass is in the ball and half is in the uniform bar. Find the period of each pendulum for small oscillations. Which one takes longer for a swing A PPC is curved becauseA. Some productive resources are better at certain tasks than otherresourcesB. There is a limited amount of productive resourcesC. Some goods are harder to make than other goods Businesses assess their information needs to determine the type of information that will help them deal with: A line passes through the point (4,-7) and has a slope of -1/2. Click show your work below and show work to write the equation of the line in point-slope form. Who is the Unravished bride why it is addressed as such? When you sign up for dance class you have a startup fee of $75 and then a monthly fee of $54.The dance company uses the expression 75 + 54m to find out how much it will cost to attend classes. How much would it cost to take classes for 10 month? intuit our radio station is running a show in which the songs are ordered in a specific way the last word of the title of one song must match the first word Wht is the missing part of 1/7 of ... 1/35 What is the difference of the first and third quartiles in 1. 96, 2. 09, 01. 79, 1. 61, 1. 75, 2. 11, and 1. 84 Mrs. Patel arrives at the imaging department as a trauma patient and has multiple fractures. The patient was medicated for pain in the emergency room before arriving at the imaging department. Halfway through the exams, Mrs. Patel begins to show signs of pain and is unable to hold still. You speak with the patient to inform her how much longer it will be before you are done and to assess the level of pain. The patient informs you that her pain is becoming unbearable and does not know if she will be able to hold still for the remainder of the procedures. What is the best action to handle this situation Types of weather how to change Weather