Answer:
w = mg
14500 = m ×10 [g=10m/s2]
m =14500/10
m=1450kg
Agatha the snake is 50 centimeters long.3 years from now she will be 152 centimeters long and fully grown. If Agatha grows at constant rate, how much does she grow in length each year
Answer: 34cm each year
Explanation:
Calculate torque using angular momentum
Answer:
The equation net τ=ΔLΔt net τ = Δ L Δ t gives the relationship between torque and the angular momentum produced.
What is the weight of a 68-kg astronaut in outer space traveling with constant velocity?.
The weight of an astronaut in outer space and traveling with constant velocity is equal to 0 Newton.
Given the following data:
Mass of astronaut = 68 kgTo determine the weight of an astronaut in outer space and traveling with constant velocity:
Mathematically, the weight of an object is calculated by using the following formula;
[tex]Weight = mg[/tex]
Where:
m is the mass of an object.g is the acceleration due to gravity.At a constant velocity, the value of the astronaut's acceleration is equal to zero meter per seconds square ([tex]0\;m/s^2[/tex]).
Substituting the given parameters into the formula, we have;
[tex]Weight = 68 \times 0[/tex]
Weight = 0 Newton
Read more: https://brainly.com/question/18320053
What water pressure must a pump that is located on the first floor supply to have water on the thirteenth of a building with a pressure of 35 lb/in2 Assume that the distance between each floors is 10ft.
The water pressure on the first floor must be 455 PSI in order to push the water to the 13th floor at the given pressure.
The given parameters;
Pressure on the 13 th floor, P₁ = 35 PSIDistance between each floor, d = 10 ftThe vertical pressure of the water is calculated as follows;
[tex]P = \rho gh\\\\\frac{P}{h} = \rho g\\\\\frac{P}{h} = k\\\\\frac{P_1}{h_1} = \frac{P_2}{h_2} \\\\[/tex]
The vertical height of the first floor from the 13th floor = 130 ft
The vertical height of the 13 ft floor = 10 ft
[tex]P_1 = \frac{P_2 h_1}{h_2} \\\\P_1 = \frac{35 \times 130}{10} \\\\P_1 = 455 \ PSI[/tex]
Thus, the water pressure on the first floor must be 455 PSI in order to push the water to the 13th floor at the given pressure.
Learn more about vertical height and pressure here: https://brainly.com/question/15691554
What electromagnetic wave is used in nuclear research and mineral exploration?.
The electromagnetic wave used in nuclear research and mineral exploration are gamma rays.
Electromagnetic waves refer to those rays that are found in the electromagnetic spectrum. They are collectively called light. Electromagnetic waves are used for different purposes.
Gamma rays are useful in nuclear research especially in identifying decaying radionuclides. Also, gamma rays are used for geologic mapping, mineral exploration, and identification of environmental contamination.
Learn more: https://brainly.com/question/17638582
Ten seconds after starting from rest, a freely-falling object will have a speed of about ________________________
Answer:
100 m/s
Explanation:
Speed increases at a rate of 10 m/s (actually 9.8 m/s) every second. Thus after 10 seconds, the speed is 10 x 10 = 100 m/s.
Tommy does 45 Joules of work to push the pencil over 3 meter. How much force did he use?
Answer:
Work = Force × Distance
Therefore Force = Work/Distance
= 45 joules/3 metres
= 15 newton
Explanation:
Answer:
15
Explanation:
15
What feature of a planet's orbit does Kelper's first law of motion describe?
A. the time required for each orbit
B. the shape
C. the distance from the aphelion to the perihelion
D. the distance to the sun
A car traveling at 35.6m/s crashes into a concert barrier and comes to a stop in 0.35 seconds. Calculate the average force applied to the 75kg driver.A 3.2kg steel ball traveling at 4.1m/s strikes a second ball of a mass 2.3kg Initially at rest. Calculate the velocity of the second ball when the first one continues traveling in the same direction with a speed of 1.5m/s2 balls of putty are shot towards one another. Ball 1 has a mass of 4.3kg and is moving at 18.6m/s . Ball 2 has a mass of 5.8kg and is moving at 9.5m/s. They collide and stick together. Calculate their final combine velocity.I really appreciate those attempting the problems. I do know the answers but I’m unaware of the steps to get there. Please include all formulas in your response and steps so I can learn and understand.Check your answer:7629N3.6m/s2.46m/sThank you all!
The force on the driver is 7629 N. The velocity of the second ball is 3.6 m/s. The combined velocity of the balls is 13.37 m/s.
We have to find the acceleration using;
v = u - at
v = final velocity = 0 m/s
u = initial velocity = 35.6m/s
a = acceleration = ?
t = time = 0.35 s
u = at
a = u/t = 35.6m/s / 0.35 s
a = 101.7 ms-2
The force on the driver = 75kg × 101.7 ms-2 = 7629 N
Using the principle of conservation of momentum;
Momentum before collision = momentum after collision
m1u1 +m2u2 = m1v1 + m2v2
Hence
(3.2 × 4.1) + 0 = (3.2 × 1.5) + 2.3v2
13.12 = 4.8 + 2.3v2
13.12 - 4.8 = 2.3v2
v2 = 13.12 - 4.8/2.3
v2 = 3.6 m/s
Using the principle of conservation of linear momentum;
m1u1 + m2u2 = m1v1 + m2v2
(4.3 × 18.6) + (5.8 × 9.5) = (4.3 + 5.8) v
v = 79.98 + 55.1/10.1
v = 13.37 m/s
Learn more: https://brainly.com/question/865531
How do energy transformations occur in a hydroelectric plant?
The potential energy of water is converted to mechanical energy by a turbine.
The kinetic energy of water is converted by a dam into potential energy.
The kinetic energy of water is converted by a generator into electric energy.
The potential energy of water is converted by a transformer into electric energy.
Answer:
The answer is #3: The kinetic energy of water is converted by a generator into electric energy.
Explanation:
Hydropower plants capture the energy of falling water to generate electricity. A turbine converts the kinetic energy of falling water into mechanical energy. Then a generator converts the mechanical energy from the turbine into electrical energy.
What is gibbs free energy.
Answer:
It’s a
Explanation:
an astronomer looking out into space will observe that
Answer:
The farther out a galaxy is from Earth, the faster it is moving away.
Explanation:
During a collision, a 63.9-kilogram driver of a car moving at 24 m/s is brought to rest by an inflating airbag in 1.2 seconds. What is the magnitude of the force exerted on the driver by the airbag?
Hi there!
We can use impulse for this situation:
I = Δp = mΔv
Impulse = Force × time, so:
I = 63.9(24) = 1533.6 Ns
Find force by dividing by time:
I/t = 1533.6/1.2 = 1278 N
PLEASE ANSWER NEED HELP!!!!!!!! PLEASE THE CORRECT ANSWER!!!!!!
Zhiyu wants to start an exercise program. He knows that he should talk to his doctor, but he cannot get an appointment for several weeks. He does not have any health conditions. What is the BEST advice for Zhiyu?
A.
All exercise needs to be medically supervised, so he must wait.
B.
There is always a risk of injury, so he needs professional advice before he starts.
C.
He can start slowly with low impact activity like walking or light weightlifting.
D.
He should do whatever he feels like; his body will let him know if he overdoes it.
PLEASE NO LINKS OR I WILL REPORT YOU
Answer:
c
Explanation:
NO LINKS! What are the definitions of initial horizontal velocity and initial vertical velocity? Please help! This like is my 20th time asking this question because many people have been scamming me...
Answer:
answer
Explanation:
The initial horizontal velocity canbe determined by measuring the diameter of the ball and dividing by the time that it takes for the ball to move across the photogate. That is Vo = d/t.
When Vertical velocity refers to the speed of an object's movement in a vertical direction.
A chemist is studying an unknown substance and could break the substance into its elemental components only by using chemical means. Based on this observation, how should the unknown substance be classified?
A. impure substance
B. solution
C. mixture
D. pure substance
The answer is D
I took the quiz lol
plz help will mark brainliest
Explanation:
The rod can be in equilibrium only if the resultant force is 0 and the moment around any point of the rod must be equal to 0.
We have to take moments around the pivoted point.
Moment = Force × Perpendicular distance to the force
For the rod to be in equilibrium,
Clockwise moment - Anticlockwise moment = 0
Clockwise moment = Anticlockwise moment
The distance between pivoted point and the weight of rod = 50 cm - 30 cm = 20 cm
So 20 cm× 1.2 N produces a Clockwise moment
If Perpendicular distance between pivoted point and 2N load is x,
Anticlockwise moment = x × 2N
20 cm× 1.2N = 2N × x
x = 12 cm
So 2 N load is at 12 from the pivoted point.
From the left edge of the meter ruler, 2N load is at 30-12 cm distance
= 18 cm
Answer: 18 cm
Explanation:
Two towers of height 40 m and 30 m respectively support a transmission line conductor at water crossing. The horizontal distance between the towers is 300 m. If the tension in the conductor is 1590 kg, find the clearance of the conductor at a point mid-way between the supports. Weight of conductor is 0·8 kg/m. Bases of the towers can be considered to be at the water level.
The sag in the tensioned cable depends on the weight of the cable and
the applied tension.
The clearance midway between the support is approximately 29.34 metersReasons:
The given parameters are;
Height of the towers are; h₁ = 40 m and h₂ = 30 m
Horizontal distance between the towers, l = 300 m
The tension in the conductor, T = 1,590 kg
Weight of the conductor, w = 0.8 kg/m
Required:
The clearance space of the conductor mid-way between the support
Solution:
The distance, x₁, to the lowest point on the conductor, from the tower, h₁, is given by the formula;
[tex]\displaystyle x_1 = \mathbf{ \frac{l}{2} -\frac{T \cdot h}{w \cdot l}}[/tex]
Where;
h = h₂ - h₁ = 40 m - 30 m = 10 m
Which gives;
[tex]\displaystyle x_1 = \frac{300}{2} -\frac{1590 \times 10}{0.8 \times 300} = \mathbf{83.75}[/tex]
The sag at the lowest point is give by the formula;
[tex]\displaystyle d_1 = \mathbf{ \frac{W \cdot x_1^2}{2 \cdot T}}[/tex]
Therefore;
[tex]\displaystyle d_1 = \frac{0.8 \times 83.75^2}{2 \times 1590} = \frac{4489}{2544} \approx 1.765[/tex]
The lowest point sag, s₁ = 30 m - 1.765 m = 28.235 m
The distance of the midpoint from the lowest point, x, is therefore;
[tex]\displaystyle x = \frac{l}{2} - x_1 = \frac{300}{2} - 83.75 = \mathbf{ 66.25}[/tex]
Which gives;
[tex]\displaystyle d_x = \frac{0.8 \times 66.25^2}{2 \times 1590} = \frac{53}{48} \approx 1.104[/tex]
The clearance midway between the support ≈ 28.235 + 1.104 ≈ 29.34
The clearance midway between the support ≈ 29.34 m
Learn more about overhead lines sag calculations here:
https://brainly.com/question/14210921
what causes us to perceive objects in three dimensions?
a. objects in 3-D appear to have width and height, but no depth
b. light bouncing or reflecting off an object in different ways
c. The curvature of space-time relative to objects solar mass
d. The rate of time dilation as we approach objects
Answer:
Light bouncing or reflecting off an object in different ways.
I just took a quiz and this was the answer
(k12 answer)
Light bouncing or reflecting off an object in different ways causes us to perceive objects in three-dimensions. Thus, the correct option is B.
How do we perceive objects in three dimension?Binocular fusion permits the perception of a single clear image and it also provides extra cues for the depth perception. That is, the binocular disparity between the two images is used by the nervous system of an individual to allow the perception of a three-dimensional world where the approximate distance of an object can be determined.
The depth perception is the ability to perceive the distance to objects using the visual system and visual perception.
Therefore, the correct option is B.
Learn more about Vision here:
https://brainly.com/question/7464210
#SPJ2
what tool had allowed scientists to learn about the characteristics of eaths layers???
Answer:
seismic waves
Explanation:
i think thats the answer
A campfire is a good example of all three types of heat transfer. The molecules of the fire touching the pot and heating it up is __________________. The air above the fire heating up, becoming less dense and rising is an example of _________________. All around the campfire you can feel the waves of heat because of _____________.
Where does the energy released in a nuclear decay reaction come from
A. Electrons
B. Chemical bonds
C. Positrons
D. The binding energy of the nucleus
What is the ideal temperature for a lithium-ion battery?.
Answer:
16 to 25 degrees f
Explanation:
A car starts from rest and accelerates at 2.5m/s^2 for 2s. What is the final velocity of the car
Answer:
5m/s ez
Explanation:
plz make me brainliest
1. A student pushes horizontally on a book with a force of 2 N, which causes the book to slide at a constant velocity. What is the force of friction on the book?
Answer:
The horizontal forces are equal in size and opposite in direction. They are balanced, so the horizontal resultant force is zero. This means that there is no horizontal acceleration just a horizontal constant speed. If a submarine is not moving horizontally, then there are no horizontal forces.
I hope it helps.
what is cheetah speed and strength?
Answer:
Speed: 109.4–120.7 km/h (68.0–75.0 mph)
Strength: Couldn't find out.
Explanation:
How to calculate angular velocity.
Answer:
Answer below
Explanation:
We can rearrange this statement to get the angular velocity equation: = r v / |r|2, where all of these variables are vectors and |r| is the radius's absolute value. The angular velocity is really a pseudovector with a direction perpendicular to the plane of rotational movement.
The rotating movement of bodies is described by angular velocity. It determines how quickly they rotate around a central point. Rotations may be divided into two categories. The first explains the motion of an object's centre of mass around a certain point in space, which is referred to as an origin. Planets orbiting the Sun, for example, or an automobile exiting a roadway are two instances.
The first angular velocity equation is similar to the linear velocity equation: = (2 - 1) / t = / t, where 1 and 2 are two values of angles on a circle, and is the difference between them. t is the time it takes for the angle to shift. As you can see, there is a ratio of the positional change in a period for normal velocity, but we utilise angle instead of distance here. Definition of angular velocity using linear velocity The second angular velocity formula, v = r, may be obtained from the linear velocity and radius relationship using the cross product.
_______________________________________________________
(Hope this helps can I pls have brainlist (crown)☺️)
A ball is fired from a cannon at point 1 and follows the trajectory shown in the figure below. Air
resistance may be neglected. Five possible vectors are also shown in the figure; the letter E represents
the zero vector.
D
E:
C
B
a
Which vector best represents the ball's velocity at position 2?
Which vector best represents the ball's acceleration at point 2?
Which vector best represents the ball's velocity at position 3?
Which vector best represents the ball's acceleration at point 3?
du
b)
A
d)
In trajectory, acceleration vector is not the same with the velocity vector but it depends on the change in velocity. The acceleration path is perpendicular to the velocity vector path. The Correct answers are:
a.) D
b.) B
c.) C
d.) A
A Vector is a quantity that has both magnitude and direction.
Given that a ball is fired from a cannon at point 1 and follows the trajectory shown in the figure.
a.) The vector best represents the ball's velocity at position 2 is D
b.) The vector best represents the ball's acceleration at point 2 is B
c.) Which vector best represents the ball's velocity at position 3 = C
d.) Which vector best represents the ball's acceleration at point = A
In trajectory, acceleration vector is not the same with the velocity vector but depends on the change in velocity. The acceleration path is perpendicular to the velocity vector path.
At point 3, since the ball path is parabolic, the velocity at that point is not equal to zero but will tend to take a horizontal path.
Learn more here: https://brainly.com/question/25519989
differential rotation is when a planet's equator and polar regions rotate at different rates. True False
a girl on a bridge throws a rock straight down at -12.5 m/s. it hits the ground 38.4 m below. How much time did it take?
The acceleration of both the rocks is only due to the gravitational force acting on them. Even though the speed of thrown rock would be greater than that of dropped rock, the acceleration of both the rocks would be g downwards.
Answer:
1.80
Explanation:
38.4=-12.5(a)-1/2(-9.80)(a)^2
a= acceleration
^2 is the exponent