a car traveling on a uphill grade has a grade resistance of lb. determine the weight of the car to the nearest hundred pounds.

Answers

Answer 1

To the nearest hundred pounds, the weight of the car is 4,000 pounds.

The force of grade resistance can be related to the weight of the car using the equation:

F_grade = (W_car × sinθ) / g

where F_grade is the force of grade resistance, W_car is the weight of the car, θ is the slope angle (1.6°), and g is the acceleration due to gravity (32.2 ft/s²).

Rearranging the equation to solve for W_car, we have:

W_car = (F_grade × g) / sin θ = (114 lb × 32.2 ft/s²) / sin(1.6°)

Using a calculator, the weight of the car can be found to be approximately 4,000 pounds. To the nearest hundred pounds, the weight of the car is 4,000 pounds.

Learn more about weight:

brainly.com/question/10069252

#SPJ4

A car traveling on a 1.6° uphill grade has a grade resistance of 114 lb. determine the weight of the car to the nearest hundred pounds.


Related Questions

an electromagnet draws 3 kw of active power and 4kvar of inductive reactive power. what is the apparent power?

Answers

The required apparent power when active power and reactive power are specified is calculated to be 5 kva.

Apparent power is the measure of alternating current power that is computed by multiplying rms current by rms voltage. The overall amount of power required to operate a computer, illuminate a lightbulb, and power a production system is known as apparent power.

The power that is actually used for a particular load, or the active power or real power, if all the available power isn't used.

The active power drawn by the electromagnet (P) = 3 kw

The reactive power drawn by the electromagnet (Q) = 4 kvar

The apparent power is given by the equation,
S = √(P² + Q²) = √(3² + 4²) = 5 kva

Cos Ф is the power factor.

It is given by,

Cos Ф = active power/apparent power = 3 kw/5 kva = 0.6

To know more about power:

https://brainly.com/question/29843051

#SPJ4

what is the wavelength that you hear if you are standing behind the ambulance? express your answer to three significant figures and include the appropriate units.

Answers

The detected sound has an approximate frequency and wavelength of 2766 2766 2766 Hz and 0.124 0.124 0.124 m, respectively.

Why do ambulances use low frequency sound?

The Rumbler has a higher vehicle penetration capability than an electrical siren alone thanks to its low frequency content. This function increases The Rumbler's ability to alert drivers, particularly when the listener's view of the emergency vehicle is obscured.

Are ambulances loud?

The ambulance's acoustic noise levels were 130–135 dB–A when viewed from 1 metre away from the car. Due to effective soundproofing, acoustic noise levels are much lower and don't exceed 80 dB-A.

To know more about wavelength visit:-

https://brainly.com/question/13533093

#SPJ4

which statements are true regarding a conductor in electrostatic equilibrium? a: all unbalanced charges must lie on the surfaces of the conductors. b: the electric field immediately outside a conductor must be perpendicular to the conductor. c: the electric field is zero inside the conductor.

Answers

All the statements are true regarding a conductor in electrostatic equilibrium.

The correct answer: A, B and C.

All unbalanced charges must lie on the surfaces of the conductors. The electric field immediately outside a conductor must be perpendicular to the conductor. The electric field is zero inside the conductor.

In addition to the three statements that are true regarding a conductor in electrostatic equilibrium, there are a few other important facts to consider when dealing with electric fields. In an electrostatic field, the electric field lines are always perpendicular to the surface of the conductor. This means that any unbalanced charge on a conductor's surface must produce an electric field that is also perpendicular to the surface.

Learn more about electrostatic equilibrium:

https://brainly.com/question/21499127

#SPJ4

it is possible to view the moon in first-quarter phase the day after a total lunar eclipse. group of answer choices true false

Answers

It is untrue that the day following a total lunar eclipse, one can see the moon in its first quarter phase.

Can you observe a lunar eclipse every full moon?

Only a night with a full moon can have a lunar eclipse. However, because Planet's orbit around the sun and the moon's orbit around the earth are not in the same plane, they do not occur every full moon night. Only when the sun, the earth, and the moon align in a straight line can an eclipse occur.

What phase of the Moon must be present for a lunar eclipse to occur?

Only under a full moon and when the Moon travels entirely or partially through Earth's shadow can there be a lunar eclipse.

To know more about lunar eclipse visit:-

https://brainly.com/question/30432326

#SPJ4

for a marble launched at an angle above the horizontal, should the calculated position of the cup be moved closer or further away from the ramp?

Answers

The cup should be placed farther from the ramp in order to accommodate marbles launched at angles above horizontal.

A marble is a tiny, spherical ball or toy made of stone, glass, or ceramic. Marbles are frequently used in games and recreational activities like marbles, where participants shoot or roll the marbles towards a target with their fingers. Marbles come in a variety of shapes, hues, and patterns, and they could be adorned with swirls or other patterns. In the past, marbles have been used for a variety of activities in numerous cultures and civilizations, such as religious rites, art, and commerce items. Today, marbles are mostly used recreationally and may keep individuals of all ages entertained for hours.

Learn more about marbles here:

https://brainly.com/question/11963004

#SPJ4

you toss a ball straight up in the air, it goes up, comes down, and you catch it. if it took 4 s from when you threw it to when you caught it, how high did it go?

Answers

So, the height to which the ball was thrown is approximately 29.4 meters. To find the height to which the ball was thrown, we need to use the equation for motion under constant acceleration, which is given by:

h = vi * t + (1/2) * a * t^2

where h is the height, vi is the initial velocity (which is the upward velocity with which the ball was thrown), t is the time it took for the ball to reach its highest point, and a is the acceleration due to gravity (-9.8 m/s^2).

Since the ball was thrown upward and then came back down, it reached its highest point after half of the total time, which is 2 seconds. So, we can use 2 seconds for the value of t in the equation.

Next, we can solve for vi using the time it took for the ball to reach its highest point and the acceleration due to gravity:

vi = h / (2 * t) - (1/2) * a * t

Substituting the known values into the equation:

vi = h / (2 * 2) - (1/2) * (-9.8 m/s^2) * 2^2

vi = h / 4 + 9.8 m/s

Now, we can use the value of vi to find the height h:

h = vi * 2 - (1/2) * (-9.8 m/s^2) * 2^2

h = 2 * (h / 4 + 9.8 m/s) - (1/2) * (-9.8 m/s^2) * 2^2

h = 2 * (h / 4 + 9.8 m/s) + 9.8 m

h = (h / 2 + 19.6 m) + 9.8 m

h = h / 2 + 29.4 m

For such more question on acceleration

https://brainly.com/question/460763

#SPJ4

what is the real reason we have different moon phases?

Answers

Recall that the moon orbits the Earth, which affects how the moon appears to be in different phases. Half of the moon always receives sunlight as it orbits the Earth.

Darkness is always present on the moon's other side. It depends on the situation whether we can see the illuminated components.

What is the reason for the different phases of Moon?

Due to the Moon's orbit around Earth and Earth's orbit around the Sun, we experience varying amounts of Moonlight throughout the course of a month. Moving is everywhere. A lunar eclipse prevents the Moon from receiving sunlight because Earth is positioned between the Sun and the Moon. All or a portion of the lunar surface is obscured by Earth.

What are the 4 main phases of the Moon?

We generally pay attention to the new moon, first quarter, full moon, and third quarter of the moon. The lunar cycle has a week-long interval between each of these moon phases.

What causes the Moon to look different every 3/4 days?

As a result of its orbit around the Earth, the moon experiences phases. From Earth, we can observe that the sun illuminates the moon to a varying extent depending on its position in relation to the Earth. The moon can be completely dark or completely illuminated.

To know more about the phases of the moon:

https://brainly.com/question/2285324

#SPJ1

(A) A small mass of 0.60 kg is rotated at the end of a string in a horizontal circle of radius 1.20 m. The string will break if the tension exceeds 60 N. What is the GREATEST frequency of revolution that is possible? (B) the same mass of 0.60 kg is now rotated at the end of another string at a constant speed, v, in a vertical circle of radius 1.20 m. the minimum tension in the string is 2.1N (I) state and explain where the tension in the string is maximum and minimum (ii) find the speed of the mass​

Answers

(a) The maximum frequency of revolution is 4.0 rad/s.

b (i) The tension in the string is maximum when the object is at the top of its path and minimum when it is at the bottom of its path.

b (ii) The speed of the mass can be found using the minimum tension in the string is 2 m/s.

What is the maximum frequency of revolution?

The maximum frequency of revolution is given by the maximum tension in the string, which is 60 N.

T = mv² / r

where;

m is the mass of the object (0.60 kg), v is its linear speed, r is the radius of the circle (1.20 m).

The linear speed is given by:

v = 2πrf

where;

f is the frequency of revolution

f = √T / (mr²))

f = √(60 / (0.60 x 1.20²))

f = 4.0 rad/s

(i) The tension in the string is maximum when the object is at the top of its path and minimum when it is at the bottom of its path. This is because the tension provides the centripetal force that keeps the object moving in a circular path.

(ii) The speed of the mass can be found using the minimum tension in the string, which is 2.1 N:

T = mv² / r = 2.1 N

Rearranging and solving for v, we get:

v = √(Tr / m)

v = √(2.1 x 1.20 / 0.60)

v = 2.0 m/s

Learn more about frequency of revolution here: https://brainly.com/question/28168362

#SPJ1

A person drives a car around a circular cloverleaf with a radius of 56 m at a uniform speed of 10 m/s.
(a) What is the acceleration of the car?
m/s2
the center

(b) Compare this answer with the acceleration due to gravity as a percentage.
%

Would you be able to sense the car's acceleration if you were riding in it?
Yes
No

A person drives a car around a circular cloverleaf with a radius of 56 m at a uniform speed of 10 m/s.
(a) What is the acceleration of the car?
m/s2
the center

(b) Compare this answer with the acceleration due to gravity as a percentage.
%

Would you be able to sense the car's acceleration if you were riding in it?
Yes
No

Answers

The acceleration of the car is  1.78 m/s² and the compared percentage with acceleration due to gravity is 18.16%.

What is the acceleration?The change in the rate of an object's velocity with respect to time is defined as acceleration. Vector quantities are accelerations. The orientation of an object's acceleration is determined by the orientation of its net force.The acceleration of gravity is the acceleration of any object moving solely under the influence of gravity.

To find the acceleration,

Velocity = 10m/s

Radius = 56 m

The formula to find acceleration is,

a = v²/r

By substituting the values,

a = 10²/56

   = 100/56

   = 1.78 m/s²

As a result, the acceleration due to gravity as a percentage is 9.8 m/s².

Percentage required = (1.78 /9.8) x 100

                                   = 18.16%

18.16% is the required percentage.

To learn more about acceleration refer to :

https://brainly.com/question/460763

#SPJ1

stan is teaching a german shepherd to jump through hoops. initially, he gives the german shepherd a treat for approaching the hoop, then only for jumping up in front of the hoop, and finally only for jumping through the hoop. stan is using the method of

Answers

Early reinforcement reinforces actions that closely resemble the intended behaviour. Later, reinforcement is limited to actions that closely resemble the desired behaviour.

What is the use of successive approximations method?

The technique of consecutive approximations is referred to as a "algorithm or algorithmic process" and is used to solve equations of a specific class using a series of simple arithmetic operations.

One of the well-known traditional approaches for solving integral equations is the successive approximations method (SAM). In the literature, it is sometimes referred to as the Picard iteration approach.

In fact, this approach offers a strategy for resolving initial value issues or integral equations. A strategy for modifying operant behaviour that involves rewarding responses that resemble the intended behaviour.

Therefore, stan is using the method of successive approximations.

Learn more about approximations here:

https://brainly.com/question/29669607

#SPJ1

17. A microwave has a wavelength of 3 cm and a speed of 3 x 108 m/s. Calculate the frequency.

Answers

Important Formulas:

[tex]v=\lambda f[/tex]

velocity(measured in m/s) = wavelength(measured in meters) * frequency(measured in hertz)

__________________________________________________________

Given:

[tex]\lambda=0.03m[/tex] (cm to m)

[tex]v=300,000,000m/s[/tex] (speed of light)

[tex]f=?[/tex]

__________________________________________________________

Rearranging formula for velocity to make frequency the subject:

[tex]v=\lambda f[/tex]

[tex]\dfrac{v}{\lambda} =\dfrac{\lambda f}{\lambda}[/tex]

[tex]f=\dfrac{v}{\lambda}[/tex]

__________________________________________________________

Finding frequency:

[tex]f=\dfrac{v}{\lambda}[/tex]

[tex]f=\dfrac{300,000,000}{0.03}[/tex]

__________________________________________________________

Answer:

[tex]\boxed{f = 1\times10^{10} Hertz}[/tex]

what is the downward force exerted by the atmosphere on a football field whose dimensions are 110 m by 49 m ?

Answers

The downward force exerted by the atmosphere on a football field whose dimensions are 110 m by 49 m is 546×10⁶ N.

The atmospheric pressure or air pressure is the force exerted on a surface by the air above it as gravity pulls it to Earth. Atmospheric pressure is commonly measured with a barometer. The force of buoyancy exerted by the atmosphere on a balloon is B in the upward direction and remains constant. The force of air resistance on the balloon acts opposite to the direction of velocity and is proportional to it. The total downward force exerted by the atmosphere on a football field is found using the atmospheric pressure. So, P atm. A=F. Where A is the area of the football field, A=a⋅b=110 m⋅49m. Finally F=101.3 kPa. 110.49 m² = 546×10⁶ N.

For further learning about atmospheric pressure, refer to the link: https://brainly.com/question/25233428

#SPJ4

what happens when a falling object reaches terminal velocity?(1 point) responses it hits the ground and stops. it hits the ground and stops. it speeds up. it speeds up. it slows down. it slows down. it stops accelerating. it stops accelerating.

Answers

When a falling object reaches terminal velocity, it stops accelerating.

option D.

What happens when a falling object reaches terminal velocity?

When a falling object reaches terminal velocity, it means it has reached the maximum speed it can attain while falling due to the drag force (air resistance) acting upon it, which is equal in magnitude to the gravitational force acting upon it.

At terminal velocity, the net force on the object is zero, so its velocity remains constant and it falls at a constant rate. The terminal velocity of an object depends on its mass, size, shape, and the density of the fluid it is falling through.

Learn more about terminal velocity here: https://brainly.com/question/25905661

#SPJ1

why did aristarchus believe in the radical notion that the sun was at the center of the universe and that earth moved around it in an orbit

Answers

Aristarchus believed that the sun was the center of the universe because he had found that the sun was larger than the earth and other planets and made the conclusion that other planets revolved around the sun.

Definition of Aristarchus Theory

Aristarchus' hypothesis was that the sun and stars did not move, that the earth revolved around the sun, while the sun remained stationary in the center of the earth's orbit.

In testing his hypothesis, Aristarchus constructed a kind of "sundial" which he probably used to measure the height of the sun and the position of the stars, as well as measure the angles and diameters of the moon as accurately as possible.

As a result, apart from the theory of the sun as the center of the solar system, Aristarchus also discovered that the earth is one of several planets revolving around the sun. Aristarchus used the theory of lunar eclipses to estimate the size of the solar system according to the radius of the earth

Learn more about Aristarchus Theory at: https://brainly.com/question/12689873

#SPJ4

a person sings musical note which has a frequency of 256 Hz , how many times do the person's vocal chords vibrate each second ? ​

Answers

Answer: no question is wron

Explanation:

every month, the moon passes between earth and the sun (new moon) and on the opposite side of earth from the sun (full moon). why do not we see eclipses every month?

Answers

Because the moon's orbit is tilted, we do not see eclipses every month.

Total solar eclipses happen when the moon crosses between the sun and Earth and casts its shadow onto our planet, but Earth doesn't experience a total solar eclipse every month.

Exploratorium Senior Scientist Paul Doherty explains why not—the orbit of the moon is tilted relative to the orbit of the Earth around the sun, so the moon often passes below or above Earth.

At those times, it does not cross the line between the sun and the Earth, and therefore does not create a solar eclipse. There are just two times a year in the Earth's orbit when there is a possibility of a total solar eclipse.

To know more about the eclipses, here

brainly.com/question/4279342

#SPJ4

a sinusoidal transverse wave is propagating to the right. what direction is the velocity of a particle on this wave when it is at a peak (maximum displacement from the zero axis)?

Answers

Along a string, a sinusoidal axial wave is moving in the opposite direction of the x-axis.

A wave is what?

A wave is an energetic perturbation in a material that doesn't include any net particle motion. Elastic deformation, a change in pressure, an electric or magnetic strength, an electric potential, or a change in temperature are a few examples. a disruption or variation that causes energy to be transferred gradually from one point to another in a medium; it can be a different from place to place or a change in pressure, external electromagnetic strength, electrostatic force, or temperature.

How does pressure work?

The pressure of soil against a wall; the application of force to a surface by an item, liquid, or., in contact with it. Physics. power.

To know more about wave visits :

https://brainly.com/question/25954805

#SPJ4

a tree house is 8 m above the ground. if peter does 360 j of work while pulling a box from the ground up to his tree house with a rope, what is the mass of a box?

Answers

To find the mass of the box, we can use the equation for work done by gravity, which is: Work = Force x Distance is 4.64 kg

where Force is the force required to lift the box, and Distance is the distance the  box is lifted.

The force required to lift an object is given by the equation:

Force = Mass x Gravity

where Mass is the mass of the object and Gravity is the acceleration due to gravity (9.8 m/s^2 on the surface of the Earth).

So, we can substitute the Force equation into the Work equation to get:

Work = Mass x Gravity x Distance

Rearranging this equation, we get:

Mass = Work / (Gravity x Distance)

Now, we can substitute the known values into this equation:

Mass = 360 J / (9.8 m/s^2 x 8 m)

Mass = 360 J / 77.6 J/kg

Mass = 4.64 kg

So, the mass of the box is approximately 4.64 kg.

For such more question on work done

https://brainly.com/question/8119756

#SPJ4

at what temperature would the average velocity of helium atoms equal the escape velocity from (a) the earth

Answers

At 23700K would the average velocity of helium atoms equal the escape velocity from (a) the earth.

The mass of a helium atom is

m=6.64×10−27 kg m = 6.64 × 10 − 27 k g.

Given let the average speed of helium atoms equal the escape speed from the Earth.

Thus we have at 23700K the average speed of helium atoms equal the escape speed from the Earth.

What is helium?

Its melting point at ordinary pressure is zero, and its boiling point is the lowest of all the elements.After hydrogen, it is the second-lightest and second-most prevalent element in the observable universe.More than 12 times the mass of all the heavier elements put together, it makes up around 24% of the total mass of the elements.Due to helium-4's extremely high nuclear binding energy (per nucleon), compared to other elements, its abundance is similar to this in both the Sun and Jupiter.

To know more about the helium, click the link given below:

https://brainly.com/question/1780577

#SPJ4

fuses and circuit breakers are intended to protect conductors and equipment from the effects of potentially harmful ? .

Answers

Yes, conductors and equipment are protected from the impacts of potentially damaging by fuses and circuit breakers.

A circuit breaker is a type of electrical safety device used to guard against overcurrent damage to electrical circuits. Its primary purpose is to stop the flow of current in order to safeguard machinery and lower the likelihood of a fire. A circuit breaker can be reset to continue normal operation, in contrast to a fuse, which can only be used once before needing to be replaced.

There are many different sizes of circuit breakers, from tiny devices that protect low-current circuits or specific home appliances to massive switchgear built to safeguard high voltage circuits supplying an entire city.

To know more about the fuses, here

brainly.com/question/24148257

#SPJ4

What is the frequency of a planet around a star in orbit at a mean distance of R, if it is twice the mean distance of a planet orbiting the same star with a frequency of 2.10 × 10^-5 rev/s?
A) 1.4 × 10^-5 rev/s
B) 7.4 × 10^-6 rev/s
C) 1.7 × 10^-7 rev/s
D) 6.8 × 10^-7 rev/s
E) 2.4 × 10^-8 rev/s

Pls show work so I can learn how you got to that answer. Thank you!

Answers

Answer:

A) 1.4 × 10^-5 rev/s

Explanation:

We can use Kepler's Third Law of Planetary Motion to solve this problem. Kepler's Third Law states that the square of the period of a planet's orbit is proportional to the cube of its average distance from the star.

T^2 = k * R^3

where T is the period of the orbit and R is the mean distance of the planet from the star. k is a constant of proportionality that depends on the mass of the star.

Let's assume that the frequency of the first planet is f1 and its mean distance from the star is R1. The frequency of the second planet is 2.10 × 10^-5 rev/s and its mean distance from the star is 2R1. We can relate the frequency of the orbit to the period of the orbit as follows:

f = 1/T

Using the first equation, we can find the period of the first planet:

T1^2 = k * R1^3

And the period of the second planet:

T2^2 = k * (2R1)^3

Now, we can substitute these equations into the equation for frequency:

f1 = 1/T1 = 1/sqrt(k * R1^3)

f2 = 1/T2 = 1/sqrt(k * (2R1)^3)

Finally, we can set f1 = 2f2 and solve for f1:

2f2 = 1/sqrt(k * R1^3)

f1 = 1/sqrt(k * R1^3) / 2

So, f1 = 1.4 × 10^-5 rev/s, which is the answer (A).

10 kg of R-134a fill a 1. 115-m3 rigid container at an initial temperature of –30°C. The container is then heated until the pressure is 200 kPa. Determine the final temperature and the initial pressure. Use data from the steam tables

Answers

Gas has a final temperature of 273.6 K and a starting pressure of 177.6 kPa.

R-134a is 1,1,1,2-tetrafluoroethane, as is well known.

Using the ideal gas formula:

PV =nRT PV = w/M RT, where P = gas pressure =? and V = gas volume = 1.115 m3.

T = gas temperature (-30°C) = 273 + (-30) = 243K

R is 8.314 m3 Pa/mole, which is the gas constant. M = molar mass of R-134a gas = 102.03g/mole K = mass of gas = 10 kg = 10,000 g

When you plug in all the values provided, you get the ideal gas equation: P = 1.115m3 = 10000 g/102.03 g/mole 8.314 m3 Pa/mole. 177587.9687 Pa = 177.6 kPa = K 243K P

Consequently, the gas's starting pressure is 177.6 kPa.

We now need to determine the gas's final temperature.

Gay-Law Lussac states that for constant volume and number of moles, the pressure of a gas is precisely proportional to its temperature.

P∝T

P1/T1 = P2/T2

where

P1 is the initial pressure of gas = 177.6 kPa

P2 is the final pressure of gas = 200 kPa

T1 is the initial pressure of gas = ?

T2 is the final pressure of gas =

177.6 kPa/243K = 200 kPa/T2

T2 = 273.6 K

To know about pressure

https://brainly.com/question/12971272

#SPJ4

The School Security Committee has complained that there are some intruders who hide behind the gate and break into the school in the evening As Physica students, you have been asked to design a device which the ratekeeper will use to see the intruders who hide behind the gate. You will present to the head teacher and staff.​

Answers

In order to locate intruders hiding behind the gate, we propose a device that employs infrared sensors and an alert system.

Design:

The camera that will be attached to our device will be on a long telescopic pole. The camera will be facing the area behind the school gate, so the pole will be placed close to the gate.

The gatekeeper will be able to clearly see any intruders who might be hiding behind the gate because the camera will be connected to a television or monitor. To ensure maximum safety, the camera will also have night vision and motion detection capabilities.

The camera will be connected to a remote control so that the gatekeeper can tilt and pan the camera to get a better view of the area behind the gate. This will make the device easy to use. The gatekeeper will be able to zoom in on any suspects using the zoom feature on the remote control.

Additionally, the device will have an alarm system that will sound if there is any movement in the area behind the gate. A light will also be connected to the alarm system, and when the alarm goes off, it will flash brightly to let the gatekeeper know there are intruders there.

In conclusion, the school will get a comprehensive security system from our device that will help find intruders who hide behind the gate. The device is simple to operate and will give the gatekeeper clear, in-depth pictures of any intruders who might be hiding behind the gate.

Learn more about safety devices:

brainly.com/question/30023530

#SPJ1

an electron traveling north enters a region where the electric field is uniform and points north. the electron:

Answers

When an electron traveling north reaches an area with a consistent electric field facing north, the electron's speed and direction of motion are altered.

What is an electron?

A negatively charged subatomic particle known as an electron can either be free or attached to an atom. In the electron cloud, which is located outside of the atomic nucleus, exist electrons.

An electric field that is oriented northward will exert a force on an electron moving northward through it. The electron will accelerate in the field's direction as a result of this force. The strength of the electric field and the charge of the electron will determine how much the acceleration is.

The electron will continue to receive a constant force and move in a straight line with a constant acceleration in a uniform electric field since the electric field's direction is constant. As the electron passes through the electric field, both its velocity and kinetic energy will increase.

To know more about electron, visit:

https://brainly.com/question/1255220

#SPJ4

a spring has a natural length of 15 cm. it takes 50 joules of work to stretch it to 35 cm. how much work is needed to stretch it from a length of 35 cm to 85 cm?

Answers

In the first phase, you are conflating force and labour. Your supplied quantity is work since work is defined in joules. Given that you are 0.5 meters away from equilibrium,

The joule (unit J) is what?

What is a Joule (unit J) - Definition of an Energy Unit One energy unit. Energy is often thought of as the capacity to produce heat or work. 2 Joules of energy. Joule (unit: J) (unit: J). A derived energy unit is the joule. Three examples of 1 joule of energy. The energy is converted into kinetic of a 1 kilogram object traveling at a speed of 2 m/s

What does one joule of energy mean?

A derivative unit of energy is the joule. It is the amount of energy transmitted to an item when a one newton force is applied to it in the plane of its motion across a one meter distance. 0.239 calories make up 1 joule. 9.48 × 10-4 BTU equals 1 joule. A joule equals 2.778 x 10-7 kWh. Examples of 1 Joule of Energy

To know more about joule visit:

https://brainly.com/question/18596314

#SPJ4

systems tend to change until they reach equilibrium. based on this fact, what will happen when cold air and warm are added to the same container?

Answers

When cold air and warm are added to the same container then the warm air will get colder and cold air will get warmer.

The warm air molecules have more kinetic energy than the cold air molecules when the two air masses are blended. As a result, the warm air molecules attack the cold air molecules and transmit some of their kinetic energy. Up until balance is established, the warm air will get colder and the cold air will get warmer.

Two systems are considered to be in thermal equilibrium with one another when they are in contact with one another and there is no energy movement between them. Thermal equilibrium, said simply, denotes that both systems are at the same temperature. Our daily lives are so reliant on the idea of thermal homeostasis.

Learn more about warm air

brainly.com/question/11823314

#SPJ4

for the point charges arragement shown in the figure find the net electrostatic force exerted on Q by q1 and q2

Answers

The net electrostatic force exerted on Q by q1 and q2 is

F=9.99 *10^-2

What are point charges?

Generally, Point charges are hypothetical charges concentrated at a single point in space. They are used in physics and electrical engineering to simplify the analysis of electrical fields and their interactions.

Point charges are considered to be dimensionless, that is, they have zero size, and they have a magnitude that is either positive or negative, depending on whether the charge is a proton or an electron, respectively. In reality, point charges do not exist, as all charges are distributed over a finite volume, but they are a useful abstraction for certain calculations and simulations.

[tex]& K=\frac{1}{4 \bar{R} \varepsilon} \\\\& =\frac{1}{4 \times 3.142 \times 8-854 \times 10^{-12}} \\\\& =\frac{1}{1-112626454 \times 10^{-10}} \\[/tex]

=8.79 *10^9

[tex]f=\frac{k /q1 / /q2/}{r^2}[/tex]

r=0.30 +0.30

r=0.6

[tex]F=\frac{8.17 \times 10^7 \times\left(2 \times 10^{-6}\right) \times\left(2 \times 10^{-6}\right)}{0.6^2} \\[/tex]

[tex]F=\frac{(8-11 \times 2 \times 2) \times\left(101 \times 10^{-6} \times 10^{-6}\right)}{0.36} \\[/tex]

[tex]& F=\frac{35.96 \times 10^{-3}}{0.36} \\[/tex]

F=9.99 *10^-2

Read more about point charges

https://brainly.com/question/14450910

#SPJ1

for a two-dimensional collision (vertical separation of centers is not zero), how does increasing the mass of the yellow stone impact the final velocity of the red stone? the final velocity of the yellow stone?

Answers

On increasing the mass of the yellow stone,in vertical direction balls center move away from each other and collision probability between the two balls will decrease and final velocity of yellow ball will also decrease.

A Collision happens when a strong power strikes on at least two bodies in a generally brief timeframe. Collision is a one-time event. Because of the crash, the elaborate particles' energy and force change. The crash might happen because of real actual contact between the taking part bodies, like an impact between two billiard balls or a ball and bat. There might be impacts where there is no immediate actual touch, for example, an alpha molecule slamming into a core.

Two dimensional collision(vertical collision)

The accompanying cases might emerge in the event of versatile crash between two bodies :

(1) Two-layered Versatile Crash in Research center Reference Casing

(2) Versatile crash with boundless masses in two aspects

To know more about collision,visit here:

https://brainly.com/question/13138178

#SPJ4

when the athlete holds the barbell on his hand, the reaction force is the weight of the barbell on his hand. how does this force vary for the case where the barbell is accelerated upward? downward?

Answers

The reaction force on the athlete's hand holding a barbell over their head increases when the barbell is accelerated upward and decreases when accelerated downward.

When the athlete lifts the barbell overhead, the reaction force on their hand is equal to the weight of the barbell. But when the barbell is accelerated upward: the athlete must apply a greater force to lift it, resulting in an increased reaction force on their hand.

Conversely when the barbell is accelerated downward: the athlete's force is less than the weight of the barbell, resulting in a decreased reaction force on their hand. These changes in reaction force are a result of Newtons third law of motion which states that every action has an equal and opposite reaction.

Learn more about athlete holds the barbell brainly.com/question/13490225

#SPJ4

the total number of stars in the observable universe is roughly equivalent to group of answer choices the number of grains of dry sand on all the beaches on earth the number of grains of dry sand on miami beach infinity the number of stars in the milky way galaxy

Answers

The star in the observable cosmos is about equal to: A) The amount of sand grains on all of Earth's beaches

What sort of things are stars?

A star is formed in an enormous gas cloud. The sky's temperature is too moderate for the creation of molecules. The Delta haze groups in the Orion galaxy are stars in this stage of development. 2. Protostar When gas particles hit in the solar nebula, heat energy is produced.

The Sun is a star, but why?

The energy and light provided by the sun, which is actually a star, are essential in maintaining all life on earth. Nuclear fusion events that take place inside stars are what give them their light. A byproduct of this process, which turns hydrogen into helium, is energy. This energy is what manifests as light for humans.

To know more about star visit:

https://brainly.com/question/30054460

#SPJ4

Other Questions
(1/8j+2/3)-(5/3j+9/12) Descriptive essay The setting is a vault in a bank the maximum noise voltage that may appear at the input of a logic gate without changing the logical state of its output is termed as businesses that are _____, like mcdonald's, have both a direct and indirect impact on the economy through job creation and spending Explain in a post of 250-300 words how you learned to write essays. When you write essays today, what process do you use to complete the essay? Where do go or what do you use to gather your information? Suppose Pasteurs swan-necked flasks containing boiled broth became cloudy twenty-four hours afterboiling. Which choice could best explain the turbidity or cloudiness in the broth without supportingspontaneous generation?a.Endospores in the broth survived boiling and grew after the broth cooled.b.Contaminating organisms in the broth killed by boiling became alive again after the brothcooled.c.Chemicals in the broth came together to form living organisms.d.The broth allowed light to pass through it with less interference after boiling.e.Solid material in the broth dissolved during boiling high taxation, excess regulation, and limited choices in a business environment are likely to result in a(n) _____. a. decrease in entrepreneurial activitiesb. increase in the level of personal freedomc. increase in global d. trading social crisis 4. how would chief blue jacket and anthony wayne feel about the outcome of the battle Difference between polynomial and multinational HELP!!!!!!!ASAP!!! I NEED TO SUBMIT! WILL GIVE 100 POINTS AND BRAINLIEST!!!!!!!!!!A group of students was asked about the number of flights they have taken. The data is shown in the line plot. Which of the following best describes the spread of the data? Explain its meaning in this situation. The data has a range of 5, which is a wide spread. This means the greatest number of flights was 5. The data has a range of 15, which is a narrow spread. This means that there is not a large difference in the number of flights taken by the students. The data has a range of 5, which is a narrow spread. This means that most of the students have taken a similar number of flights. The data has a range of 15, which is a wide spread. This means that there is a difference of 15 flights between each of the students. plants are the first trophic level because they: produce food energy. have no natural predators. consume all living matter. are incapable of autonomous movement. Which statement defines heterozygous?O a genotype composed of two identical allelesO a genotype composed of two recessive allelesOa genotype composed of two different allelesOa genotype composed of two dominant alleles What is the amount a business receives from the sale of an item? Calculate the simple interest earned on an investment of $9710 at a semiannual rate of 3.6% for 4 years. Write your answer to the nearest cent. how does the poem describe gilgamesh and enkidu before their first meeting? what do they look like physically? what is the source of their strength? which of the following, related to the candidate question, will assist the researcher in determining what is already known about the topic and what new information a new study could contribute?a.meta analysisb.literature viewc.questionnairesd.concept mapping The ability of an individual to own and exercise control over scarce resources is called:a) Market failure,b) Property rights,c) Externality,d) Market power. match the following words and definitions. 1. the splitting that occurs when the nucleus of an atom absorbs a neutron 2. giving off energy in the form of alpha particles, beta particles, or gamma rays 3. a small particle of an atom with a negative charge4. the forming of larger atomic nuclei from smaller ones with a release of energyradioactive fission electronfusion Please match the statements to the term they describe to test your understanding of the structure of an antibody molecule.1. The two arms that bind to antigen2. Part of antibody involved in binding to various cells and molecules of the immune response3. Region between Fab and Fc that allows swiveling of the Fab4. Holds polypeptide chains together In exercise 11-14 find the value of x for each one thank you whoever gets all of it right gets brainliest photo is below please help I have one day to turn this in or I fail