Answer:
Explanation:
The formula for centripetal acceleration is
[tex]a_c=\frac{v^2}{r}[/tex] and filling in:
[tex]11.3=\frac{(30.0)^2}{r}[/tex] and solving for r:
[tex]r=\frac{(30.0)^2}{11.3}[/tex] gives us that
r = 79.6 m
what is the closest to the order of magnitude of the energy rquired to split a nucleus in to its individual protons and neutrons
Answer:
More than two million electron volts.
Explanation:
More than two million electron volts energy are needed to break or split a deuteron into a proton and a neutron. Nuclear binding energy is the type of energy that is required to split an atom's nucleus into protons and neutrons. The deuteron is an isotope of hydrogen that is composed of a proton and a neutron and it is a stable particle. Very huge amount of energy is needed for the splitting of nucleus due to the presence of heavy particles i.e. proton and neutron.
In an electromagnet, what produces the magnetic field?
A. Electric charges moving through a conducting wire.
B. Electric charges moving through the metal core.
C. The metal core within a coil of wire.
D. The magnetic field of a permanent magnet.
kettles heated on stoves used to be made of copper. was this a good choice?
Kettles heated on stoves are used to be made up of copper. This is because copper is a good conductor of heat and electricity.
Why copper is used in making kettles?Copper is used in making kettles. This is because copper is an excellent choice for a tea kettle as it is an excellent conductor of heat and electricity. This means that copper heats up quickly and evenly, making it ideal for the purpose of boiling water and preparing tea. Copper is also a durable material which can last for many years with proper care.
Copper kettles are polished from the outer surface as it is subject to corrosion that is caused by salts and sulfates. If the kettles are not cleaned completely, this corrosion, even as a slight film, will affect the taste of what is prepared in that copper kettle, giving a metallic sensation to taste.
Learn more about Copper here:
https://brainly.com/question/13677872
#SPJ2
The burner in a hot air balloon adds 6400 J of heat to the balloon while the ballon expands. As the balloon expands, it does 3100 J of work on the surrounding air. What is the internal change in thermal energy of the balloon?
Answer:
the change in the internal energy of the balloon is 3,300 J
Explanation:
Given;
heat gained by the balloon system, Q = 6,400 J
work done on the surrounding air by the balloon, W = 3,100 J
The change in the internal energy of the system is calculated from the first law of thermodynamics;
ΔU = Q - W
where;
ΔU is the change in the internal energy of the balloon;
ΔU = 6,400 J - 3,100 J
ΔU = 3,300 J
Therefore, the change in the internal energy of the balloon is 3,300 J
by how much is the weight of body less on the moon surface than on earth surface why
Answer:
Our weight on moon is less than it would be on Earth.
Explanation:
Due to a difference of the strength of gravity on the moon. The moon's gravitation force is determined by the mass and the size of the moon. Since the moon has significantly less mass than the Earth, it will not pull objects toward itself at the strength that Earth will. This means that if you went to the moon you would weigh less, even though your mass stays the same.
Capacitance (C) is measured in farads, where 1 farad is equivalent to 1 coulomb per volt. Resistance (R) is measured in ohms, and 1 ohm is equal to 1 volt per ampère. The coulomb is defined as the amount of charge passing when a current of 1 ampère flows for 1 second. What is the unit of RC expressed in its simplest form?
When fundamental units are combined, they result in derived units. RC (which means Resistance Capacitance) is a derived unit and its unit in the simplest form is Coulomb per Ampere (C/A)
Given that:
Capacitance (C) [tex]\to[/tex] Farads (f)
and
[tex]1f = 1\frac CV[/tex] ----- 1 farad = 1 capacitance per volt
Resistance (R) [tex]\to[/tex] Ohms [tex]\Omega[/tex]
[tex]1 \Omega = 1\frac{V}{A}[/tex]
The unit of RC is the product of the unit of R by the unit of C.
i.e.
[tex]RC = 1f \times 1\Omega[/tex]
Substitute [tex]1f = 1\frac CV[/tex]
[tex]RC = 1\frac CV \times 1\Omega[/tex]
Substitute [tex]1 \Omega = 1\frac{V}{A}[/tex]
[tex]RC = 1\frac CV \times 1\frac VA[/tex]
Cancel out volts (V)
[tex]RC = 1\frac CA[/tex]
[tex]\frac CA[/tex] means Coulomb per Ampere
Hence, the unit of RC is Coulomb per Ampere.
Read more about units at:
https://brainly.com/question/10167613
Which of the following is an example of a surface wave?
A. Compression wave
B. Sound wave
C. Electromagnetic wave
D. Ocean wave
Answer:
ocean wave
hope it helped you
If your weight is 588N on the earth, how far should you go from the centre of the earth so that your weight will be 300N? The radius of the earth is 6400km and the value of g on the earth surface is 9.8m/s2. please explain....
Answer:
Explanation:
You need something that relates distance to what the gravitational pull is. You can set up a complex sort of proportion. What you need is a number that is comparable to 9.81 or you can just use the Gravitational Force formula with a 4 tier fraction.
Givens
x = the additional distance toward outer space above the radius of the earth.
G is the gravitational constant.
m1 = the person's mass (which does not change no matter where you are).
m2 = the earth's mass
F1 = 588 N
F2 = 300 N
Formula
[tex]\frac{F1}{F2} = \frac{588 N}{300N}=\frac{\frac{Gm1*m2/}{6400^2} }{\frac{G*m1*m2}{(6400 + x)^2} }[/tex]
Solution
G*m1*m2 all cancel. So what you get looks like this.
[tex]\frac{588}{300} = \frac{(6400 + x)^2}{6400^2}[/tex]
Cross Multiply
588 * 6400^2 = 300*(6400+x)^2 Now all you need do is solve for x.
x will be in km.
588*40960000 = 300 * (40960000 + 12800x + x^2)
1.2288*10^10 + 3840000x + 300x^2 = 2.408448*10^10
300x^2 + 3840000x + 1.2288*10^10 = 2.408448 * 10^10
Subtract 2.409448 * 10^10 from both sides.
300x^2 + 3840000x - 1,179648 * 10^10
Now use the quadratic formula
I'm guessing I should have converted this to meters because I'm getting ridiculous numbers. They are already large enough as you can see. The method is correct, even if the numbers are not.
A car is moving at 30km/h. What is its speed in m/s? Give your answer to 2 significant figures.
Explanation is in the attachment
hope it is helpful to you
find the x component of a vector of 105 km/h at an angle of 25 degrees.
Answer:
Explanation:
First I converted the km/h to m/s, which is the more common unit for velocity. In m/s, 105 km/h is 29.2. Thus, to find the x component of the vector:
29.2cos25 = 26 m/s
If you want it in km/h:
105cos25 = 95 km/h
A scientist that applies the laws of science to the needs of communities is called _____.
the experimental scientist
the engineer
the teacher
the technician
Answer:
The experimental scientist
Find the moment of inertia of a hoop (a thin-walled, hollow ring) with mass MMM and radius RRR about an axis perpendicular to the hoop's plane at an edge.
Answer:
I = sum m *r^2 where m represents the (small) individual masses and r is the distance of that mass from center of rotation
Note: sum m = M
For the hoop given all masses are at a distance RRR from the center of rotation
I = MMM * RRR^2
CLASS ENVIRONMENTAL SCIENCE
The____domain incorporates cultural norms that directly impact sustainable development. The___ domain focuses on the protection and preservation of natural and artificial resources
Blank 1: Blank 2:
A: social. A: public policy
B: economic. B: technological
C: sustainable. C: environmental
When extrication will involve cutting the roof off a vehicle, stabilization of the vehicle should include:
Answer:
Deflating the tires by pulling the valve stems
Explanation:
When an accident happens, the EMT process is to take off the top of the vehicle of the highly damaged vehicle so that it can easily be assessed to rescue the vehicle occupants. This creates a bigger exit for the rescuers to take out the people. Vehicle extrication means removing the vehicle from around someone involved in a fatal collision, when other other ways of exiting is not advised or possible. to stabilize the vehicle you have to deflate all tires by pulling the valve stems.
a tennis ball “A” is released from rest down a 10.0 m long inclined ramp with a uniform acceleration of 5.0 m/s2. Another tennis ball “B” is initially located at the same height as ball “A” right above the lower edge of the ramp. Ball “B” is thrown upward with some initial speed at the same instant as the release of ball “A”.
a) What was the initial velocity of ball "B" so that "A" and "B" reach the bottom of the ramp at the same time?
Answer:
Please find the complete question in the attached file.
Explanation:
The time is taken by ball A to reach the bottom [tex]\to t=\sqrt{\frac{2s}{a}}=\sqrt{\frac{2 \times 10}{5}}=\sqrt{\frac{2 0}{5}}= \sqrt{4}=2\ s[/tex]
Calculating the velocity of the ball:
[tex]-h=ut-\frac{1}{2}gt^2\\\\-S \sin 30=ut-\frac{1}{2}gt^2\\\\-5=u(2)-\frac{1}{2}\times 9.81 \times 2^2\\\\[/tex]
[tex]-5=2u-9.81 \times 2\\\\-5=2u-19.62\\\\-5+19.62=2u\\\\14.62=2u\\\\u=\frac{14.62}{2}\\\\u=7.31 \ \frac{m}{s}[/tex]
how to answer thiss helppp
Answer:
Look at work
Explanation:
Your given the mass of planet M and radius as well as second mass.
Use universal gravitation law to find force of gravity
Fg= Gm1m2/r^2
Plug in givens
Fg= 553.6 N
Use newtons second law
Fg= ma
553.6N=5a
solve for a= 110.72m/s
Weight is 553.6N
An ammeter with a resistance of 5.0 ohm is connected in series with a 3.0V cell and a lamp rated at 300 mA, 3V. Calculate the current that the ammeter will measure.
plz solve this, I'll mark you as brainliest
Answer:
I = 0.2 A
Explanation:
Lamp is rated at 300 mA
I_lamp = 300 mA = 0.3 A
Voltage is; V = 3V
Thus; Resistance is given by;
R = V/I
R = 3/0.3
R = 10 ohms
Now, since the ammeter of 5 ohms is connected in series with the lamp. Thus equivalent resistance;
R_eq = 10 + 5
R_eq = 15 ohms
Ammeter current will be;
I = V/R_eq
I = 3/15
I = 0.2 A
Please help me with this!!!
Answer:
Its all about figuring out what numbers you times by
Explanation:
soooooooooo just x the numbers until you get it right, and i'm guessing your in a school soooo ask your teacher aswell :)
While using a digital radiography system, suppose a radiographer uses exposure factors of 10 mAs and 70 kVp with an 8:1 grid for an AP shoulder radiograph with acceptable anatomical part penetration and detector element (DEL) exposure. If the radiographer desires to increase scatter absorption using a 12:1 grid, what new exposure factors should be used to maintain the same DEL exposure
Answer:
b. 12.5 mAs, 70 kVp
Explanation:
The given parameter are;
The initial exposure factors := 10 mAs and 70 kVp
The initial Grid Ratio, G.R.₁ = 8:1
The Grid Ratio with which the radiographer desires to increase the scatter absorption, G.R.₂ = 12:1
Given that the lead content in the 12:1 grid, is higher than the lead content in 8:1 grid and that 12:1 grid needs more mAs to compensate, and provides a higher image contrast, the amount of extra mAs is given by the Grid Conversion Factors, GCF, as follows;
The GCF for G.R. 8:1 = 4
The GCF for G.R. 12:1 = 5
Therefore, given that the mAs used by the radiographer for 8:1 Grid Ratio is 10 mAs, the mAs required for a G.R. of 12:1 in order to maintain the same exposure is given as follows;
mAs for G.R. of 12:1 = 10 mAs × 5/4 = 12.5 mAs
Therefore the new exposure factors are;
12.5 mAs, 70 kVp
Every living thing gives off thermal energy in the form of which type of
electromagnetic waves?
O A Visible light
B. Gamma rays
C. infrared
O D. Ultraviolet
Every living things gives off thermal energy in the form electromagnetic waves. The electromagnetic wave releasing off is infrared radiation. Hence, option C is correct. .
What are electromagnetic waves ?Electromagnetic waves are associated with a combined electric field and magnetic field. They can pass through vacuum as well as through a medium. Unlike mechanical waves, all the electromagnetic waves are transverse waves.
The oscillation of particles is in the direction perpendicular to the wave propagation. There are 7 types of radiations in the electromagnetic spectrum. The light we see is called visible light.
The infrared waves are located in between microwaves and visible light. Every living thing gives off thermal energy in the form of infrared radiation. Hence, option C is correct.
Find more on infrared waves:
https://brainly.com/question/30309627
#SPJ2
Internal energy of a diatomic gas consists of:
OA. kinetic energy due to vibration and rotation.
B. kinetic energy due to translation, vibration, and rotation.
C. potential energy due to intermolecular forces.
D. kinetic energy due to translation only.
Answer:
C) Potential energy due to intermolecular forces.
100 g of water are cooled and the enthalpy change is -12,540 J. What is the change in temperature of the water?
Answer:
-29.9907
Explanation:
c = Q / (mΔT)
You're looking for ΔT, so you would plug in what you already know and get C= -12540/(100 x ΔT)
then you would solve
The chart shows the speed at which light travels through different media.
In which medium would light have the longest wavelength?
- Water
- Air
- Glass
- Diamond
Answer:
Air.
Explanation:
To know which option is correct, let us consider the relationship between velocity and the wavelength of a wave. This is illustrated below:
Velocity, wavelength and frequency are related by the following equation:
Velocity = wavelength × frequency
v = λf
From the equation above, we can see clearly that the velocity is directly proportional to the wavelength.
This means that an increase in the wavelength will lead to an increase in the velocity and also, a decrease in the wavelength will lead to a decrease in the velocity.
Now, considering the table given in the question above, we can see that the wave has a higher speed in air. This simply means that the wave will also have a higher wavelength in air.
Thus, the correct answer to the question is: air
a cyclist has a combined mass of 88 kg and a combined weight of 862.4 then accelerates at 1.2m/s after 2 seconds he reaches a of 2.4m/s what is his momentum at this point
Answer:
shushhhgggvvv vgfxgh
Explanation:
gey laahhg
Which describes an atom that has fewer neutrons than protons and more electrons than protons?
negative compound
positive compound
positive ion
negative ion
Answer:
Negative ion
.................
Si la rapidez del sonido en el agua es de 1450 m/s. ¿Cuánto tiempo tardará en recorrer 500 m en el fondo del lago?
Answer:
2.9
Explanation:
es 2 minutos con 9 segundos seria algo así (1450)÷(500)
How much heat is required to evaporate 0.15 kg of lead at 1750°C, the boiling point for lead? The heat of vaporization for lead is Lv = 871 × 103 J/kg.
Answer:
Heat required = mass× latent heat Q = 0.15 × 871 ×
The heat required to evaporate 0.15 kg of lead at 1750°C will be 130,650 J.
What is heat?The movement of energy from a hot to a cold item is characterized as heat. Heat energy flows from a hot material to a cold one.
This occurs because faster-vibrating molecules transmit their energy to slower-vibrating ones.
The given data in the problem is;
m is the mass of lead = 0.15 kg
T is the temperature = 1750°C,
The latent heat of vaporization for lead is, [tex]\rm L_V[/tex] = 871 × 10³ J/kg.
The heat is found as;
[tex]\rm Q= m \times L_V \\\\ \rm Q= 0.15 \times 871 \times 10^3 \\\\ Q=130,650 \ J[/tex]
Hence the heat required to evaporate 0.15 kg of lead at 1750°C will be 130,650 J.
To learn more about the heat refer to the link;
brainly.com/question/1429452
18.How much momentum will a dump-bell of mass 10 kg transfer to the floor if it falls from a height.of 80 cm ? Take its downward acceleration to be 10 m s-2
Such asSuch ToSuch aSuch as طHow do I send the answer to the question?OkI don't know how to use this program
Answer:
MOMENTUM = 40kg ms-¹
hope it helps
have a nice day
A mass that weighs 8 lb stretches a spring 24 in. The system is acted on by an external force of 4 sin 4t lb. If the mass is pulled down 6 in. and then released, determine the position of the mass at any time. Determine the first four times at which the velocity of the mass is zero
Answer:
[tex]t = \frac{\pi}{8}, \frac{\pi}{4}, \frac{3\pi}{8}, \frac{3 \pi}{4}[/tex]
Explanation:
The equation of force is
F = 4 sin 4 t
Compare with the standard equation
f = A sin wt
where, w is the angular frequency and A is the amplitude.
Now
w = 4 rad/s
Let the time period is T.
the relation for the time period is
[tex]T = \frac{2\pi}{w}\\\\T = \frac{2 \pi}{4}\\\\T = \frac{\pi}{2}[/tex]
the time period is defined as the time taken by the body to complete one oscillation.
So, the velocity is zero at the extreme points where the object is at time, T/4 and its odd T/2, 3T/4, 3T/2, etc.
So, the velocity is zero at time
[tex]t = \frac{\pi}{8}, \frac{\pi}{4}, \frac{3\pi}{8}, \frac{3 \pi}{4}[/tex]
Two uses of static electricity and dangers of static electricity
Answer: The uses of static electricity include:
--> photocopying machines
--> precipitators
The dangers of static electricity include:
--> sparks that can lead to explosion
--> Damage to electronic equipment
Explanation:
STATIC electricity is defined as the imbalance that exists between a positive and a negative charge either within or outside an object. This is because all physical objects are made up of atoms which contains protons, electrons and neutrons. The protons are positively charged, the electrons are negatively charged, and the neutrons are neutral. This shows that physical objects are made up of charges.
Opposite charges attract each other (negative to positive). Like charges repel each other (positive to positive or negative to negative). Most of the time positive and negative charges are BALANCED in an object, which makes that object neutral.
Applications( uses) of static electricity include:
--> photocopying machines: Inkjet photocopiers and printers use static electricity to guide a minute jet of ink to the page’s precise position.
--> precipitators: the static electricity is applied in an electrostatic precipitator whereby they remove smoke from waste gases before they pass out of the chimneys in power stations that burn fossil fuels.
The disadvantages (dangers) of static electricity include:
--> Sparks that can lead to explosion: sparks generated from static electricity can cause fires or explosions due to the ignition of flammable or explosive mixtures.
--> Damage to electronic equipment: this is due to components from electrostatic discharge.