Answer:
4 km/hr^2
Explanation:
We can use the formula for acceleration:
a = (v_f - v_i) / t
where:
a = acceleration
v_f = final velocity
v_i = initial velocity
t = time taken
Substituting the given values, we get:
a = (70 km/hr - 50 km/hr) / 5 hr
a = 20 km/hr / 5 hr
a = 4 km/hr^2
Suppose we can model a certain cyanine-type dye molecule as having 10 electrons confined to a one-dimensional box of length L. Imagine that we use an external source of light to illuminate a sample of this molecule with photons having just the right energy to excite electrons from the n= 5 level to the n=7 level of the box. (a) When such excited electrons decay back toward their lowest available energy state, in addition to reradiating photons of the same energy as those from the external source, they can radiate photons of two and only two other longer wavelengths (this is the phenomenon known as fluorescence). Using an energy-level diagram showing possible transitions, identify the two transitions that produce these photons and explain why others (say, from the n=7 to the n=1 level) are impossible.(b) Assume that, of the photons discussed in part (a), the ones with the longest wavelength have a wavelength of 600 nm (in the red-orange region of the spectrum). What is the wavelength of the original photons from the external source? Are the photons from the external source visible?
(a) The two transitions that produce photons of longer wavelengths during fluorescence are from n=7 to n=5 and from n=6 to n=5.
These transitions are allowed because the energy difference between the n=7 and n=5 levels and between the n=6 and n=5 levels is equal to the energy of a photon with a longer wavelength than the excitation wavelength.
Transitions from n=7 to n=1 or from n=6 to n=1, for example, are not possible because the energy difference between these levels is greater than the energy of the excitation photon. Therefore, the excited electrons cannot decay to these lower energy levels by emitting a photon of lower energy than the excitation photon.
(b) The energy difference between the n=7 and n=5 levels is the same as the energy difference between the n=6 and n=5 levels. Therefore, the wavelength of the photon emitted during the n=7 to n=5 transition is the same as the wavelength of the photon emitted during the n=6 to n=5 transition.
If the longest wavelength of the fluorescence photons is 600 nm, we can use the following equation to calculate the energy of a photon with this wavelength:
E = hc/λ
where h is Planck's constant, c is the speed of light, and λ is the wavelength in meters.
Converting the wavelength to meters, we get:
λ = 600 nm = [tex]6.0 \times 10^{-7} m[/tex]
Substituting into the equation and solving for E, we get:
E = [tex](6.626 \times 10^{-34} Js)(3.00 \times 10^8 m/s)/(6.0 x 10^{-7} m) = 3.31 x 10^-19 J[/tex]
Since the energy of the excitation photon is equal to the energy difference between the n=5 and n=7 levels, we can use the following equation to calculate the wavelength of the excitation photon:
[tex]\Delta E = E_{n7} - E_{n5} = (h^2/8mL^2)(49-25) = 24h^2/(8mL^2)[/tex]
E_photon = hν = ΔE
ν = ΔE/h
λ = c/ν = hc/ΔE
Substituting the values, we get:
[tex]\lambda = hc/(24h^2/(8mL^2)) = 8mL^2c/3h[/tex]
Hence the wavelength of the original photon is [tex]8mL^2c/3h[/tex].
Learn more about fluorescence:
https://brainly.com/question/24228588
#SPJ11
find the total horizontal distance traveled by the bullet in 4 seconds using your rounded answer for the horizontal velocity.
The total horizontal distance traveled by the bullet in 4 seconds is: 320 meters.
Using the rounded horizontal velocity of 80 m/s.
To calculate this, we use the equation distance = velocity × time, which would be 80 m/s × 4 s = 320 m.
What is horizontal velocity?Horizontal velocity refers to the component of projectile motion that is horizontal. The horizontal velocity of a projectile is the velocity at which it is moving horizontally. In the absence of air resistance, the horizontal velocity of a projectile remains constant throughout its motion. A horizontal velocity can be positive or negative. It is positive when the projectile is moving to the right and negative when it is moving to the left.
How to calculate total horizontal distance traveled by a bullet?The formula to calculate the total horizontal distance traveled by a bullet in 4 seconds is given below.
Total horizontal distance traveled = (horizontal velocity) × (time taken)
Substitute the value of the horizontal velocity, which is rounded in the question, in the above formula to calculate the total horizontal distance traveled by the bullet. This will give you the required answer.
To know more about "horizontal velocity" refer here:
https://brainly.com/question/18084516#
#SPJ11
Which type of light can be broken into its individual wavelengths by a prism? a. infrared b. ultraviolet c. combination d. incandescebt
Although infrared or ultraviolet light is refracted at various angles when it passes through a prism, the resulting spectrum is invisible to the human eye.
Which kind of light can a prism separate into its constituent wavelengths?The white light is broken down into its component colors—red, orange, yellow, green, blue, and violet—as it passes through the prism. The separation of visible light into its many colors is known as dispersion.
Can light be annihilated?The overall amount of energy in the universe cannot be increased or decreased; rather, it only changes from one form to another. The similar process occurs when we burn a candle; wax's chemical energy is transformed into light and heat energy.
To know more about spectrum visit:-
https://brainly.com/question/12157930
#SPJ1
what is the log2(100)? it or use a calculator. (to 2 decimal places) round that number up to the next highest integer: based on the tests you've done: what is the maximum number of iterations used for quick search on a collection of 100 items? what is the maximum number of iterations used for linear search on a collections of 100 items? what is the bigo of quick search? hint: n
Log2(100) is 6.64 to 2 decimal places. Rounded up to the next highest integer, it is 7. Based on the tests done, the maximum number of iterations used for quick search on a collection of 100 items is 7 iterations.
The maximum number of iterations used for linear search on a collection of 100 items is 100 iterations. The big O of quick search is O(n log n).
log2(100) is the same as x in 2^x=100
This means 2^6.64=100
To solve for 6.64, take the logarithm of both sides.
log(2^6.64)=log(100)
6.64log(2)=log(100)
6.64=2log(10)+2log(5)
log(2)+log(1.25)+log(10)=6.64
log(2)+log(1.25)=6.64-log(10)
log(2)+log(1.25)=2.02
log(2x1.25)=2.02x2^(log(2)+log(1.25))=2.02 x 2^(log(10))=7 (rounded up)
The maximum number of iterations used for quick search on a collection of 100 items is 7 iterations.
The maximum number of iterations used for linear search on a collection of 100 items is 100 iterations. In big O notation, the time complexity of linear search is O(n).
To learn more about "log2(100)", visit: https://brainly.com/question/15602305
#SPJ11
In the sketch below, a tractor is pulling a loaded cart at a constant speed. The friction between the cart and the ground is considerable. After the cart has moved a total distance S, the net work done on the cart is ____
A. positive. B. negative. C. zero. D. two of A, B, and C, depending on circumstances. E. three of A, B, and C, depending on circumstances.
The only option that best suits the given condition is Option B, which states that the net work done on the cart is negative.In reality, the frictional force may not exactly balance the force applied by the tractor, and as a result, the net work done on the cart may be negative. Therefore, the correct answer is (B) negative.
The net work done on the cart is negative. The friction between the cart and the ground is significant.What is work?Work refers to the change in energy that occurs when an object is moved from one location to another by a force acting upon it. W = FdCosθ is the formula for calculating work. Where F is the magnitude of the force, d is the displacement of the object, and θ is the angle between the force and the displacement vectors.Since the net work done on the cart is negative, it means that the frictional force is greater than the pulling force, causing the object to slow down. As a result, the work done on the cart is considered negative since it acts in the opposite direction to the direction of motion, according to the definition of work.
for more such questions on frictional force
https://brainly.com/question/24386803
#SPJ11
11- An object of mass 0.2 kg moves in a circular path. If it makes 3/4 revolution in 0.3 s and its displacement is 6 m, calculate: a) The radius of the circular path ?
We can use the kinematic equations for circular motion to solve this problem. The equation we will use is:
θ = (s / r)
where θ is the angle of rotation (in radians), s is the displacement, and r is the radius of the circular path.
In this case, the object makes 3/4 revolution, which is equivalent to an angle of rotation of:
θ = (3/4) x 2π radians = 1.5π radians
The displacement is given as 6 m.
Therefore, we can rearrange the equation to solve for the radius:r = s / θ
r = 6 m / (1.5π radians)
r ≈ 1.273 m
Therefore, the radius of the circular path is approximately 1.273 meters.
What is a path ?
A path is a route or way that someone or something follows to reach a destination or achieve a particular goal. It can be physical or abstract, and can refer to a variety of contexts such as travel, communication, decision-making, or personal development.
A physical sense, a path can refer to a trail, road, or sidewalk that people use to walk, cycle, or drive to a particular location. In computing, a path refers to the sequence of directories and that lead to a specific file or folder.
To know more about path visit :
https://brainly.com/question/27325244
#SPJ1
in the heliocentric model of the solar system, one planet passing another in its orbit gives rise to ...
In the heliocentric model of the solar system, one planet passing another in its orbit gives rise to gravitational forces.
It can also lead to an alteration in the planets' orbits. This is due to the gravitational forces produced by the interaction between the planets. A heliocentric model is a model of the solar system in which the sun is at the center and the planets orbit it. This model was first proposed by Nicolaus Copernicus, a Polish astronomer in the 16th century. He proposed this model after observing that it better explained the motions of the planets than the previous geocentric model, in which Earth was at the center and everything else revolved around it. An orbit gives rise to the gravitational force that causes a planet to continue to travel in a circle around the sun. It is also responsible for the gravitational pull between planets, which affects their orbits. A planet passing another planet in its orbit can also cause some gravitational perturbations in its orbit. This can lead to an alteration in the planets' orbits or cause their orbits to change slightly over time. The heliocentric model is currently the widely accepted theory of how our solar system is arranged. It states that the planets orbit the sun, which is a massive ball of hot gas at the center of the solar system. The sun's gravity is what keeps the planets in their orbits.
Learn more about the heliocentric model at brainly.com/question/19757858
#SPJ4
how do net torque and rotational inertia affect the angular acceleration of a rotating object? experimentally determine the mathematical relationship between net torque, rotational inertia, and angular acceleration of a rotating object
Net torque and rotational inertia are related to the angular acceleration of a rotating object.
In general, the angular acceleration of a rotating object is directly proportional to the net torque applied to the object and inversely proportional to the object's rotational inertia.
Mathematically, this can be represented as:
α = τ / I
Where
α is the angular acceleration of the object,
τ is the net torque applied to the object, and
I is the object's rotational inertia.
The net torque is the total torque acting on an object, and it is the difference between the clockwise and anticlockwise torques. The rotational inertia of an object is the measure of an object's resistance to rotational motion.When the net torque acting on an object is zero, the angular acceleration of the object is also zero. This is because the torque and angular acceleration have a linear relationship. The greater the torque applied to an object, the greater the angular acceleration of the object.
In conclusion, the net torque and rotational inertia affect the angular acceleration of a rotating object, and the mathematical relationship between them can be experimentally determined using the formula α = τ / I.
Learn more about torque here: https://brainly.com/question/29385853
#SPJ11
Two soccer balls (ball A and ball B) are kicked down the field. Ball A is kicked farther than ball B,
but ball B reaches a higher height than ball A. Which of the balls spent more time in the air?
(Come up with your answer and then discuss among your group until there is a consensus.)
Two soccer balls were kicked down the field, Ball A and Ball B. Ball A was kicked farther than Ball B, but Ball B reached a higher height than Ball A. It can be determined that the ball that spent more time in the air was Ball B.
Why Ball B spent more time in the air than Ball A?
Ball B was kicked into the air at a higher angle, meaning it travelled upwards for a longer amount of time. The ball's horizontal velocity would have been lower than Ball A's, causing it to travel a shorter distance horizontally.
However, the additional time Ball B spent travelling upwards and falling back down would have compensated for the shorter horizontal distance travelled, allowing it to remain in the air for longer than Ball A.
Ball A's flight time would have been shorter than Ball B's flight time because of its high horizontal velocity. Because Ball B had a higher initial upward velocity, it travelled higher in the air and took longer to fall back down, resulting in a longer flight time. As a result, Ball B spent more time in the air than Ball A.
To know more about horizontal velocity:
https://brainly.com/question/18084516
#SPJ11
What do the dark lines in an absorption spectrum indicate?
The dark lines in an absorption spectrum indicate that certain frequencies or wavelengths of light have been absorbed by the material that the light has passed through. Absorption occurs when an atom or molecule in the material absorbs a photon of a particular frequency, causing the electron in the atom or molecule to move to a higher energy level.
When white light is passed through a sample of a material, some of the frequencies of light are absorbed by the atoms or molecules in the material, causing dark lines to appear in the spectrum. The positions and intensities of these lines depend on the composition of the material and the conditions under which it is observed.
Absorption spectra are used in a wide range of fields, including astronomy, chemistry, and physics, to identify the composition of materials and study their properties. The dark lines in an absorption spectrum are sometimes called absorption lines or Fraunhofer lines, after the German physicist Joseph von Fraunhofer, who first discovered them in the 19th century.
The dark lines in an absorption spectrum indicate the wavelengths that have been absorbed by the substance.What is an absorption spectrum?An absorption spectrum is a graph that demonstrates the amount of light that is absorbed by a material as a function of wavelength. The graph depicts the amount of light that a sample absorbs at specific wavelengths. An absorption spectrum is created when a source of light is transmitted through a material, and certain wavelengths are absorbed and blocked by the material while others are not. The absorbed wavelengths appear as dark lines, whereas the non-absorbed wavelengths appear as bright lines on the graph. Absorption spectra are used to detect the presence of specific materials, as different substances absorb different wavelengths of light.
For more such questions on Absorption spectrum
https://brainly.com/question/10252035
#SPJ11
if the average arterial pressure at your heart is a typical 100 mmhg , what is the average arterial pressure in your hands when they are held at your side? assume your hands are 60 cm below your heart.
The average arterial pressure in your hands when they are held at your side is 47.5 mmHg.
The average arterial pressure in your hands when they are held at your side can be determined using the hydrostatic pressure formula, which is a function of height, gravity, and density. When the hands are held at the side, they are 60 cm below the heart, which means they are at a distance of 0.6 m.
The hydrostatic pressure formula is given by
P = ρgh
Where,
P is the pressure, ρ is the density, g is the acceleration due to gravity, and h is the height. We can assume that the density of blood is constant, and we can take the value of g to be 9.81 m/s², the standard acceleration due to gravity.
Therefore, the pressure at the heart is 100 mmHg, or 100/760 = 0.131 atm. The pressure in the hands can be calculated as follows:
P = ρghP = (1.06 × 10³ kg/m³) × (9.81 m/s²) × (0.6 m)
P = 6.26 × 10³ N/m²
P = 6.26 × 10³ Pa
P = 47.5 mmHg
Therefore, the average arterial pressure in the hands when they are held at the side is 47.5 mmHg.
Learn more about hydrostatic pressure at https://brainly.com/question/28206120
#SPJ11
The diffraction limit of a 4-meter telescope is _________ than that of a 2-meter telescope.
a) two times larger
b) four times larger
c) four times smaller
d) two times smaller
e) It depends on the type of telescope.
The diffraction limit of a 4-meter telescope is two times smaller than that of a 2-meter telescope.
The diffraction limit of a telescope is the minimum distance between two objects so that they can still be viewed as separate from one another. It is determined by the instrument's aperture size and the wavelength of light being observed.
The smaller the diffraction limit, the better the telescope can distinguish between two objects that are very close together.
In simpler terms, the diffraction limit refers to the smallest object size that a telescope can observe. This is known as angular resolution, which is determined by the telescope's aperture size and the wavelength of light being observed.
The smaller the diffraction limit, the better the telescope can distinguish between two objects that are very close together.
Therefore, a 4-meter telescope has a smaller diffraction limit than a 2-meter telescope. Hence, the answer is two times smaller.
Learn more about Diffraction limit here:
brainly.com/question/15081792
#SPJ11
Approximately 85% of phosphorus in the body is found in the bones. The other 15% of phosphorus in the body serves mary impertari Durposes. Click to select the functions of phosphorus. Dairy foods are rich sources of calcium, but mary people with lactase intolerance cannot consume these foods without experiending g gestrointestinal discomfort. Fortunately, there are a number of nondairy sources of caiclum. Park the following nondairy foocs in order of calcium content. Most Cakclum Per Sening 1 cup Tohale Rais Bran cereal 1 cup cakcum-fortifed oranon juce 30z salnon with bones From the following food items, click to select the highest source of phosphorus. Click to select the organs that participate in vitamin D synthesis as a result of sunlight exposure.
Functions of phosphorus: Bone formation, ATP production, DNA and RNA synthesis, cell membrane structure.
Order of nondairy foods by calcium content: 1) 1 cup calcium-fortified orange juice, 2) 1 cup Total Raisin Bran cereal, 3) 3 oz salmon with bones.
Highest source of phosphorus: Salmon with bones.
Organs that participate in vitamin D synthesis: Skin (when exposed to sunlight), liver, and kidneys.
What is bone formation?
Bone formation is the process by which bones grow and develop, including the deposition of mineralized bone tissue by osteoblasts and the resorption of bone tissue by osteoclasts, resulting in changes to the shape and structure of bones.
What is RNA?
RNA (Ribonucleic acid) is a molecule that plays a vital role in various biological processes. It is a type of nucleic acid that is composed of a chain of nucleotides, which are the building blocks of the molecule.
RNA is similar to DNA (deoxyribonucleic acid) in terms of its structure, but it has some key differences. RNA is usually single-stranded, while DNA is double-stranded. RNA uses the sugar ribose, while DNA uses deoxyribose. RNA also contains the nitrogenous base uracil, while DNA contains thymine.
To know more about RNA, visit:
https://brainly.com/question/20914096
#SPJ1
A train is moving up a steep grade at constant velocity (see following figure) when its caboose breaks loose and starts rolling freely along the track. After 5.0 s, the caboose is 30 m behind the train. What is the acceleration of the caboose?
The velocity of the caboose is constant, so the acceleration is zero. Therefore, the caboose's acceleration is 0 m/s².
Acceleration is the rate at which the velocity of an object changes over time. The formula for acceleration is expressed as a = (v - u) / t where a is acceleration, v is final velocity, u is initial velocity, and t is time.
The velocity of the train and the caboose is the same. The caboose breaks loose and starts rolling freely along the track. Therefore, the velocity of the caboose is the same as the velocity of the train.
Given that the train moves at a constant velocity, the initial velocity of the caboose is the same as the final velocity.
Using the formula above, the acceleration of the caboose is calculated as follows:
a = (v - u) / ta
= (0 - 0) / 5.0
a = 0 m/s²
Therefore, the acceleration of the caboose is 0 m/s². This result makes sense since the caboose is moving at constant velocity.
Learn more about Acceleration here:
https://brainly.com/question/460763
#SPJ11
Hooke's law: Consider a plot of the displacement (x) as a function of the applied force (F) for an ideal elastic spring. The slope of the curve would be A) the mass of the object attached to the spring. B) the reciprocal of the acceleration of gravity. C) the spring constant. D) the acceleration due to gravity. E) the reciprocal of the spring constant.
Hooke's law: the slope of the curve would be the spring constant (C).
What is Hooke's law?Hooke's law is a principle of physics which states that the force F needed to extend or compress a spring by some distance x scales linearly with respect to that distance.
F = kx
where k is the spring constant and x is the displacement of the spring.
However, the graph of the displacement (x) against the applied force (F) is linear when the applied force is within the elastic limit of the spring.
The spring constant is equivalent to the slope of the graph, which is a straight line.
Therefore, for an ideal elastic spring, the slope of the curve would be the spring constant (C).
To know more about Hooke's law:
https://brainly.com/question/13348278
#SPJ11
the accumulation of excess electric charge on an object is called....static electricitychargeelectric chargeproton
The accumulation of excess electric charge on an object is called Static electricity.
The excess electric charge remains on the surface of an object until it is discharged, creating a spark or a small electrical shock.
Electric charge is a fundamental property of matter. The total electric charge of a system is the algebraic sum of the charges of its constituents. Electric charge is measured in coulombs (C), which is a unit of electrical charge.
Static electricity is the accumulation of excess electric charge on an object. When two different materials are rubbed together, electrons can be transferred from one material to the other. This transfer of electrons causes one material to become positively charged, while the other becomes negatively charged.
The two materials will then have an electrostatic charge, and the charges will be attracted to each other. Static electricity is responsible for lightning, which is a natural phenomenon. Lightning is caused by the build-up of static electricity in clouds. When the build-up of static electricity is sufficient, it will discharge in the form of a lightning bolt.
For similar question on Static electricity
https://brainly.com/question/821085
#SPJ11
a concave makeup mirror is designed so that a person 27.6 cm in front of it sees an upright image at a distance of 50.3 cm behind the mirror. a) what is the radius of curvature of the mirror?
The radius of curvature of a concave makeup mirror that is designed so that a person 27.6 cm in front of it sees an upright image at a distance of 50.3 cm behind the mirror is 35.54 cm.
What is the radius of curvature?The mirror formula is used to calculate this. When an object is placed in front of a concave mirror, a virtual image is formed behind it. The magnification of the virtual image is positive. Here's how to solve the problem:
1/f = 1/u + 1/v
where, f is the focal length of the mirror, u is the distance of the object from the mirror, v is the distance of the image from the mirror.
Given that , u = −27.6 cm (the negative sign indicates that the object is on the left-hand side of the mirror).
v = −50.3 cm (the negative sign indicates that the image is on the left-hand side of the mirror).
To calculate the radius of curvature, the focal length is required. The focal length can be calculated using the mirror formula.
1/f = 1/u + 1/v = (v + u)/uv = (-27.6 - 50.3)/(-27.6 × 50.3) = 77.9/1388.28 = 0.0562 cm. Therefore = 1/0.0562 = 17.77 cm.
The radius of curvature is twice the focal length.
2R = 2f = 2 × 17.77 = 35.54 cm
Thus, the radius of curvature of the mirror is 35.54 cm.
Read more about the radius here:
https://brainly.com/question/27696929
#SPJ11
In an elastic collision, bumper cars 1 and 2 are moving in the same direction when bumper car 1 rear-ends bumper car 2. The initial speed of bumper car 1 is 6.71 m/s and that of bumper car 2 is 4.93 m/s. The bumper cars have the same mass. Take the positive direction to be the direction in which the bumper cars are moving.
What is the final velocity, in meters per second, of bumper car 1?
What is the final velocity, in meters per second, of bumper car 2?
The final velocities of bumper car 1 is 6.17 m/s, and the final velocity of bumper car 2 is 5.47 m/s.
What is the final velocity?The final velocity, in meters per second, of bumper car 1 and bumper car 2 can be calculated using the law of conservation of momentum, which states that the total momentum of an isolated system remains constant during an interaction.
Since the collision is elastic, the kinetic energy is also conserved. Here's how to calculate the final velocity of bumper car 1 and bumper car 2:
Initial velocity of bumper car 1, u₁ = 6.71 m/s
Initial velocity of bumper car 2, u₂ = 4.93 m/s
Final velocity of bumper car 1, v₁ = ?
Final velocity of bumper car 2, v₂ = ?
Since the bumper cars have the same mass, m₁ = m₂ = m (say)
According to the law of conservation of momentum,
m₁u₁ + m₂u₂ = m₁v₁ + m₂v₂
Let's substitute the values:
mu₁ + mu₂ = mv₁ + mv₂
(m₁ + m₂)u₁ = m₁v₁ + m₂v₂
Now, substitute the mass and velocity values:
m × 6.71 + m × 4.93 = m × v₁ + m × v₂
Simplifying the above equation, we get:
v₁ + v₂ = 11.64 ...(1)
Similarly, using the law of conservation of kinetic energy, the final velocities can be determined. It is given by,
m₁u₁² + m₂u₂² = m₁v₁² + m₂v₂²
Substituting the values, we get:
m × 6.71² + m × 4.93² = m × v₁² + m × v₂²
Simplifying the above equation, we get:
v₁² + v₂² = 62.98 ...(2)
From equations (1) and (2), we can solve for v₁ and v₂ by elimination method as follows:
v₁ + v₂ = 11.64 ...(1)
v₁² + v₂² = 62.98 ...(2)
Multiplying equation (1) by v₁ and subtracting it from equation (2), we get:
v₁² + v₂² - v₁² - v₁v₂ = 62.98 - 11.64
v₁v₂ = 51.34 ...(3)
Again, subtracting equation (1) from equation (2), we get:
v₁² + v₂² - v₁² - 2v₁v₂ - v₂² = 62.98 - 11.64
v₁v₂ = 25.07 ...(4)
Now, solving equations (3) and (4), we get:
v₁ = 6.17 m/s, v₂ = 5.47 m/s
Therefore, the final velocity of bumper car 1 is 6.17 m/s, and the final velocity of bumper car 2 is 5.47 m/s.
Learn more about Velocity here:
brainly.com/question/30559316
#SPJ11
A ford is traveling with a speed of 15m/s and is 200 meters ahead of a Chevy that is traveling in the same direction but at a speed of 20m/s. How far will the chevy travel before catching up to the Ford?
The Chevy will travel a distance f about 600m before catching up with the ford in the same direction of the motion.
The ford if travelling at 15m/s and it is 200 m ahead of the Chevy that is travelling in the same direction with a speed of 20m/s.
Now, we can use velocity = distance/time here,
Time of ford will be equal to the time of Chevy,
Time of ford = Distance/velocity of ford
Time of ford = S/15
Now, for the Chevy, the distance will be 200 more and the time will be same, so we will write,
Time of Chevy = (S+200)/20
(S+200)/20 = S/15
15S + 3000 = 20S
5S = -2000
S = -400m
Negative sign is showing the direction of the motion only, so we can ignore that.
So, the Chevy will travel 600 m before catching up with the ford.
To know more about speed, visit,
https://brainly.com/question/13943409
#SPJ4
what bias has been applied to a pn junction if the cathode is positive with respect to the anode?
A forward biased has been applied to a P-N junction if the cathode is positive with respect to the anode.
A P-N junction is a type of semiconductor junction formed by joining together two types of semiconductors - P-type and N-type. P-type semiconductors have an excess of positively charged holes, while N-type semiconductors have an excess of negatively charged electrons.
When these two types of semiconductors are brought into contact, the electrons from the N-type material flow into the P-type material, filling some of the holes and creating a region with a net negative charge (the N-side), while the P-type material loses some of its holes and creates a region with a net positive charge (the P-side). This creates a potential difference between the P and N regions, which can be used to generate a current. P-N junctions are essential components in electronic devices such as diodes, transistors, and solar cells.
To learn more about P-N junction visit here:
brainly.com/question/13507783
#SPJ4
Four small spheres, each of which you can regard as a point of mass 0.200 kg, are arranged in a square 0.400 m on a side and connected by light rods a)Find the moment of inertia of the system about an axis through the center of the square, perpendicular to its plane (an axis through point O). b)Find the moment of inertia of the system about an axis bisecting two opposite sides of the square (an axis along the line AB). c)Find the moment of inertia of the system about an axis that passes through the centers of the upper left and lower right spheres and through point O.
The moment of inertia of the system for the three situations are 0.026667 kg m2,0.04 kg m2,0.013333 kg .
Four small spheres, each of which you can regard as a point of mass 0.200 kg, are arranged in a square 0.400 m on a side and connected by light rods
a) The moment of inertia of the system about an axis
through the center of the square,
perpendicular to its plane (an axis through point O) is equal to
4 x 0.200 kg x (0.400 m)2/12
= 0.026667 kg m2.
b) The moment of inertia of the system about an axis
bisecting two opposite sides of the square (an axis along the line AB) is equal to
4 x 0.200 kg x (0.400 m)2/8
= 0.04 kg m2.
c) The moment of inertia of the system about an axis
that passes through the centers of the upper left and lower right spheres and
through point O is equal to
2 x 0.200 kg x (0.400 m)2/12
= 0.013333 kg m2.
To learn more about the moment of inertia: https://brainly.com/question/14460640
#SPJ11
calculate suppose an object has a mass of 15 g and a volume of 5 cm^3. what is the density of the object?
An object has a mass of 15 g and a volume of 5 cm³, the density of the object is: 3 g/cm³
To calculate the density of an object with a mass of 15 g and a volume of 5 cm³, you can use the equation
Density = Mass/Volume.
Using this equation, the density of the object is 3 g/cm³.
Density is a measure of how much mass is contained in a given volume of an object. The higher the density, the more mass is contained in the same volume. Mass is measured in grams (g) while volume is measured in cubic centimeters (cm³).
To calculate the density of an object, you must divide the mass of the object (measured in grams) by the volume of the object (measured in cm³).
In this example, the mass of the object is 15 g and the volume of the object is 5 cm³. So, the density of the object is calculated by dividing 15 g by 5 cm³, which gives us a result of 3 g/cm³.
In summary, to calculate the density of an object, you must divide the mass (measured in g) by the volume (measured in cm³). In this example, the mass of the object is 15 g and the volume of the object is 5 cm³, so the density of the object is 3 g/cm³.
To know more about density refer here:
https://brainly.com/question/29775886#
#SPJ11
in a generator, a force is applied to a loop of wire, which rotates in a magnetic field. what is the primary purpose of this device?
The primary purpose of a generator is to convert mechanical energy into electrical energy. This is achieved through the application of a force to a loop of wire (often called a coil) that is rotating in a magnetic field.
As the coil rotates, it cuts through the magnetic field lines, which induces an electromotive force (EMF) or voltage across the wire. The amount of voltage induced depends on the strength of the magnetic field, the number of turns in the wire coil, and the speed at which the coil is rotated. This induced voltage can be used to power electrical devices, such as lights, motors, and appliances. Generators are used in a variety of applications, including power plants that generate electricity for cities and industries, portable generators for backup power, and small generators for camping and outdoor activities.
Learn more about magnetic field here:
https://brainly.com/question/23096032
#SPJ4
Materials that allow electricity to flow are called A) Insulators B) Conductors C) Electron flows D) Stimulators
B) Conductors, Materials known as conductors allow electricity to pass through them with little or no resistance. Metals like aluminum, silver, and copper are among the examples.
Materials known as conductors have a low resistance to electricity passing through them. They are able to move freely through the material because they have free electrons that are not strongly bonded to the atomic nucleus. Due to their abundance of free electrons, metals like copper, aluminium, silver, and gold are the most popular conductors. A material's conductivity—expressed as electrical conductivity or its opposite, resistivity—determines its capacity to carry electricity. Electrical wires, power transmission lines, electronic components, and circuit boards are just a few of the many uses for conductors. They also have a variety of industrial uses and are found in medical equipment like pacemakers and EEG machines.
learn more about conductors here:
https://brainly.com/question/30047010
#SPJ4
you push a 15.0 kg box across the floor at a steady speed of 1.25 m/s for 16.0 s. the coefficient of kinetic friction between the box and the floor is 0.680. what is your power output?
The power output of pushing a 15.0 kg box across the floor at a steady speed of 1.25 m/s for 16.0 s, with a coefficient of kinetic friction of 0.680, can be calculated using the formula:
Power = Force x Velocity
Force = mass x acceleration due to friction
Acceleration due to friction = coefficient of kinetic friction x gravitational force
Power = (15.0 kg x 0.680 x 9.8 m/s2) x (1.25 m/s)
Power = 128.4 Watts
Therefore, the power output of pushing the box for 16.0 s is 128.4 Watts.
which of the following eliminated the extensive loopholes of the general agreement on tariffs and trade (gatt)?
The World Trade Organization eliminated the extensive loopholes of the General Agreement on Tariffs and Trade (GATT).
What is the General Agreement on Tariffs and Trade (GATT)? The General Agreement on Tariffs and Trade (GATT) was a treaty that was signed in 1948 in order to help in the liberalization of international trade. The General Agreement on Tariffs and Trade (GATT) aimed at reducing tariffs and trade barriers in order to increase international trade and economic development. It established the basic principles of non-discrimination, most-favored-nation status, and transparency. The GATT's principles and rules were integrated into the World Trade Organization (WTO), which was established in 1995 after the conclusion of the Uruguay Round. The World Trade Organization (WTO) eliminated the extensive loopholes of the General Agreement on Tariffs and Trade (GATT). The WTO replaced GATT, which was a provisional system for international trade. It was a forum for member countries to negotiate and adopt trade policies. The World Trade Organization (WTO) was established to support the multilateral trading system and to ensure that member countries comply with trade agreements. It has a more effective and impartial dispute settlement process, which makes it easier for countries to resolve trade disputes. A significant distinction between the GATT and the WTO is the latter's commitment to global economic cooperation. The WTO provides a more inclusive and efficient method for conducting global trade negotiations. In addition, the WTO has the capacity to cover all aspects of trade policy and to provide binding and enforceable rules.
Learn more about general agreement on tariffs and trade (gatt) at brainly.com/question/1446090
#SPJ11
you know roughly the decrease in vo2max that occurs on the summit of mount everest vs. that at sea level. you have a client that weighs 198 lb and has a vo2 max of 4.2 l/min. provide the following information 1) what is this persons relative vo2 max at sea level (in ml/min/kg), 2) roughly, what would their vo2 max be at the top of everest (if they acclimated over time like in this study).
The person's relative VO₂ max at the sea level is decreased approximately by 7% and the VO₂ max be at the top of the Everest is essentially 0.
What is the relative VO₂ max value?To find out the person's relative VO₂ max at sea level, use the following formula:
Relative VO₂ max (ml/min/kg) = VO₂ max (ml/min) / body weight (kg)
So, relative VO₂ max at sea level (in ml/min/kg) is:
Relative VO₂ max = VO₂ max / body weight = 4.2 L/min × 1000 ml/L / (198 lb / 2.2 kg/lb) = 20.8 ml/min/kg².
It is believed that the VO2 max of a person can be decreased by approximately 7% for every 1,000 meters (3,281 feet) above sea level.
Everest's summit is at an altitude of 8,848 meters (29,029 feet), so the decrease in VO₂ max can be calculated as follows:
Decrease in VO₂ max = (altitude difference / 1000 m) × (7% VO₂ max loss per 1000 m)
So, the decrease in VO₂ max at the top of Everest is:
Decrease in VO₂ max = (8848 / 1000) × 7% = 619%
The person's VO₂ max at the top of Everest would be: VO₂ max at Everest = VO₂ max at sea level × (100 - decrease in VO₂ max) / 100 = 4.2 L/min x (100 - 619%) / 100= -22.6 L/minHowever, it is not possible for the VO₂ max to be negative, so the VO₂ max at the top of Everest is essentially 0.
Learn more about VO₂ max here:
https://brainly.com/question/14287058
#SPJ11
After the switch has been closed for a very long time, it is then opened. What is Q(topen), the charge on the capacitor at a time topen = 623 us after the switch was opened?
After the switch has been closed for a very long time, it is then opened. What is Q(open), the charge on the capacitor at a time open = 623 us after the switch was opened.
After a very long time, a capacitor is completely charged, and when the switch is turned on, the capacitor discharges in the form of an electric current, and the capacitor charges up again when the switch is turned off. Thus, the capacitor's charge Q is calculated using the formula:
Q(t) = C×V(t),
where t is the time,
C is the capacitance of the capacitor,
and V(t) is the voltage across the capacitor at time t.
In this case, the time is open = 623 us after the switch was opened.
The voltage across the capacitor at this moment, V(open), can be obtained using the formula:
[tex]V_{o} = V e^{-t_o/RC}[/tex]
where V0 is the initial voltage across the capacitor, R is the resistance of the circuit, and C is the capacitance of the capacitor.
Substituting the given values,
we have [tex]V_o= 15 V*e^{-623*10^{-6} )/(15*10^{3} *10^{-6})[/tex]
= 13.61 V
The charge on the capacitor at the time open can now be obtained by multiplying the capacitance of the capacitor by the voltage across it at this time:
Q(topen) = C × V(topen)
[tex]= 12*10^{-6} F *13.61 V[/tex]
= 0.1633 mC (or 163.3 µC)
Thus, the charge on the capacitor at the time open = 623 us
after the switch was opened is 0.1633 mC or 163.3 µC.
Learn more about capacitors at:
brainly.com/question/30460477
#SPJ11
A bus engine transfers chemical potential energy into ___ so that the bus moves.
a. kinetic energy
b. thermal energy
c. gravitational potential energy
d. electrical energy
Imagine sitting on a merry-go-round and riding along as it spins. Assuming you are not grabbing it anywhere and are not moving with respect to the platform,
A. static friction (directed inwards) causes you to accelerate.
B. you are not accelerating because you aren't moving on the platform.
C. static friction (directed outwards) causes you to accelerate.
D. sliding friction makes you accelerate inwards.
The correct option is: Static friction (directed outwards) causes you to accelerate. (Option C)
When you sit on a merry-go-round, you are not moving relative to the platform. Therefore, you are not in motion in respect to the reference frame of the platform.
The question is asking you to determine the force that causes you to accelerate as the merry-go-round spins.
Static friction is the force that keeps an object at rest or keeps it moving in a straight line when a force is applied to it.
When you're riding a merry-go-round and it starts to spin, static friction force helps you move outwards. This force opposes the force that pulls you towards the center of the platform, i.e., centripetal force.
So the correct option is C: Static friction (directed outwards) causes you to accelerate.
To know more about "Static friction" refer here:
https://brainly.com/question/13828735#
#SPJ11