A car drives at a steady speed around a perfectly circular track. Which of the following are false.(You will receive partial credit for each correct choice and lose partial credit for each incorrect choiceso choose carefully)The net force on the car is zeroBoth the acceleration and the net force point outwardBoth the acceleration and net force on the ground point inward.If there is no friction, the acceleration is outwardThe net force on the car is inversely proportional to the radius of the trackThe cars acceleration is zero.

Similarly, differentiating sin θ with respect to time, we get:d(sin θ)/dt = cos θ dθ/dtOn simplification, we get:dθ/dt = -300 cos θ / (7 sin² θ)When the rocket is 7 kilometers high, the angle of elevation from the observer is changing at a rate of 0.059 radians per hour. Answer: 0.059.The angle of elevation of the rocket from the observer on the ground 5 kilometers from the launching pad when the rocket is 7 kilometers high is changing at a rate of 2π radians per hour. This can be calculated using the law of sines, where the angle of elevation (α) is the opposite angle of the triangle made between the observer, the rocket, and the ground. In this case, the two sides are 7 km for the rocket's height, and 5 km for the distance from the observer to the launchpad. Therefore, the angle of elevation (α) = arcsin(5/7) = 2π radians per hour.

Given, the height of the rocket is 7 kilometers, the speed of the rocket is 300 kilometers per hour, and the observer is 5 kilometers from the launching pad. We need to find the rate of change of the angle of elevation of the rocket at that instant.The angle of elevation is the angle between the horizontal ground and the line of sight with respect to the rocket. Let's consider the triangle formed by the observer, the rocket and the launching pad, as shown in the figure below:We have, AB = 7 km and BC = 5 km. The angle of elevation, θ = ABD.To find the rate of change of the angle of elevation of the rocket, we need to differentiate the angle of elevation with respect to time.Let's first find the value of sin θ using the right-angled triangle ABD:Sin θ = AB/AD => AD = AB/sin θAD = 7/sin θDifferentiating with respect to time, we get:d(AD)/dt = d(7/sin θ)/dtUsing the quotient rule of differentiation, we get:d(AD)/dt = -7 cos θ dθ/dt / sin² θSimilarly, differentiating sin θ with respect to time, we get:d(sin θ)/dt = cos θ dθ/dtOn simplification, we get:dθ/dt = -300 cos θ / (7 sin² θ)When the rocket is 7 kilometers high, the angle of elevation from the observer is changing at a rate of 0.059 radians per hour. Answer: 0.059.

For more such questions on angle of elevation

https://brainly.com/question/19594654

#SPJ11

The period that must be obtained is approximately 1.76 seconds.

To determine the period that must be obtained for the training, we can use the formula for centripetal acceleration:

a = v²/r

where v is the tangential velocity and r is the radius.

The formula for the velocity of a rotating object is:

v = 2πr/T

where v is tangential velocity, π is the constant pi, and T is the rotation period.

Substituting v into the centripetal acceleration equation yields:

a = (2πr/T)²/r

The equation simplifies to

a = 4π²r/T²

The centripetal acceleration required by an astronaut is seven times greater than the gravitational acceleration on Earth. Setting these equal and solving for T gives:

T = √(4π²r/7a)

T = √(4π²(12 m)/(7*9.81 m/s²))

T ≈ 1.76 seconds

Therefore, an astronaut training for an acceleration of seven times that of the Earth's gravitational acceleration using a rotational device with a radius of 12 m must rotate for a period of 1.76 seconds.

Learn more about centripetal acceleration here: https://brainly.com/question/79801.

#SPJ11

X-rays have more energy than visible light and can pass through the human body.

X-rays are a type of electromagnetic radiation that has a shorter wavelength and higher frequency than visible light. Due to their high energy, X-rays can penetrate solid objects, including the human body. This property makes X-rays useful in medical imaging, such as X-ray radiography, computed tomography (CT) scans, and mammography.

When X-rays pass through the human body, they can be absorbed by the tissues or pass through, depending on the density of the material. Bones, for example, absorb more X-rays than soft tissues like muscle or fat, which is why they appear white in X-ray images.

While X-rays can be helpful in diagnosing medical conditions, they can also be harmful if exposure is not limited or controlled. Prolonged exposure to X-rays can damage DNA and potentially lead to cancer or other health problems.

For more similar questions on "soft tissues"

brainly.com/question/26135103

#SPJ11

The sound intensity level at the position of the microphone is 78.4 dB.

Sound intensity is the amount of sound energy that flows through an area in a certain period of time. Sound intensity is measured in units of watts per meter squared (W/m²).

Sound intensity level, often known as sound level, is the logarithmic measure of the ratio of sound power to reference power. The unit of sound level is the decibel (dB).

Sound intensity level (dB) = 10 log (I / I0)

Where I is the sound intensity in W/m² and I0 is the reference intensity level of 10⁻¹² W/m².

Substituting the given values, I = 35 W and I0 = 10⁻¹² W/m², and 59 m for r, the equation becomes

I = (P / 4πr²)

Sound intensity level (dB) = 10 log (I / I0)

Sound intensity level (dB) = 10 log [(P / 4πr²) / I0]

Sound intensity level (dB) = 10 log [(35 / 4π(59)²) / 10⁻¹²]

Sound intensity level (dB) = 78.4 dB

Therefore, the sound intensity level is 78.4 dB.

Learn more about Sound intensity here: https://brainly.com/question/17062836.

#SPJ11

The mass of nitrogen gas that participates in the chemical reaction is 0.980 grams.

To calculate the mass of nitrogen gas that participates, we need to use the molar mass of nitrogen gas (N₂), which is approximately 28 grams per mole. We can use the following equation to relate moles and mass:

mass = moles x molar mass

So, the mass of nitrogen gas that participates is:

mass = 0.035 moles x 28 g/mol = 0.98 g

We need to round our answer to the correct number of significant digits, which is determined by the least precise measurement in the problem. Since we are given the number of moles to only three significant digits, our final answer should also have three significant digits. Therefore, the mass of nitrogen gas that participates is:

mass = 0.980 g (rounded to three significant digits)

Learn more about molar mass:

https://brainly.com/question/24191825

#SPJ11

The tension in the cable that supports the elevator (2526-kg moves with a downward acceleration of 2.00 m/s²2) is 25,171 N.


To determine the tension in the cable, use the equation:

T = ma + Fg
Mass of the elevator, m = 2526 kg
Downward acceleration of the elevator, a = 2.00 m/s²
Force due to gravity, Fg = mg
= 2526 kg × 9.8 m/s²
= 24794.8 N (upwards)
The tension in the cable that supports the elevator is T.
Using Newton's second law of motion,

F = ma
Net force acting on the elevator,

F = T - Fg
= T - 24794.8 N
Therefore, T - 24794.8 N = ma
T = ma + Fg
= (2526 kg × 2.00 m/s²) + 24794.8 N
= 25,171 N
Therefore, the tension in the cable that supports the elevator is 25,171 N.

Learn more about tension here: https://brainly.com/question/29800221

#SPJ11

The multiplication factor, k of the reactor at the time of the observations is 0.87. If the thermal leakage is reduced by one-third, the value of k would increase to 1.87.

To calculate the multiplication factor, we can use the following equation:

k = (1-nf - nt)/nt,

where nf is the fraction of neutrons emitted in fission that escape while slowing down, nt is the fraction of neutrons that escape after having slowed down to thermal energies, and nt is the fraction of neutrons absorbed in the reactor while slowing down.

Given that nf = 0.1, nt = 0.15, and nt = 0.6, we can calculate the multiplication factor, k, as follows:

k = (1 - 0.1 - 0.15)/0.6

k = 0.87

Therefore, the multiplication factor of the reactor at the time these observations are made is 0.87. If the thermal leakage is reduced by one-third, the value of k would increase to 1.87.

Learn more about the reactor at https://brainly.com/question/29835028

#SPJ11

The amount of energy radiated each second by the body increases by a factor of 10000 (option D)

To determine the factor in which the amount of energy radiated per second increases, we shall determine the energy per second at 3000 K. Details below:

P₁ / T₁⁴ = P₂ / T₂⁴

P / 300⁴ = P₂ / 3000⁴

Cross multiply

300⁴ × P₂ = P × 3000⁴

Divide both sides by 300⁴

P₂ = (P × 3000⁴) / 300⁴

P₂ = P × 10000

From the above calculation, we can see that the energy per second at 3000 K, is 10000 times the energy per second at 300 K.

Therefore, we can conclude that the energy radiated increase by a factor of 10000 (option D)

Learn more about energy radiation:

https://brainly.com/question/24144494

#SPJ1

The maximum acceleration that the student can achieve with the 1500 kg suitcase is 50N/1500kg = 0.033 m/s2.

Acceleration is the change in velocity per unit time. Acceleration is a vector quantity that has both magnitude and direction. Acceleration is divided into deceleration acceleration and acceleration acceleration. Acceleration decreases meaning the direction of acceleration is opposite to the direction of velocity.

To calculate the maximum acceleration, we can use the following equation:
Force = Mass x Acceleration. Therefore, 50N = 1500kg x Acceleration

Solving for Acceleration, we get 50N/1500kg = 0.033 m/s2.

Learn more about acceleration : brainly.com/question/20595261

#SPJ11

One of the methods which will not reduce reactivity of observation is telling the person you are observing his/her behaviour. Correct option is B.

A practical, utilitarian approach, behavioral observation focuses on the plainly discernible ways in which the client engages with his or her surroundings. Behavioural observation can be used as a standalone technique or casually as a component of an interview, a test, or both.

Waiting until the subjects of the observation are used to the observer is one method to reduce reactivity. Another option is to have the observer document the actions without the subjects being aware of the observation.

The act of observation modifies in some manner the situation in which a participant is being observed. Within an experimental setting, reactivity is viewed as a threat to internal validity because the change in behaviour is not due to the experimental manipulation. Best choice is B.

To know more about observations:

https://brainly.com/question/30454101

#SPJ4

If the input force is the same for each type of pulley in the graph, then the pulley with the greatest output force is the one with the highest slope or gradient. This is because the slope or gradient of the line represents the mechanical advantage of the pulley system.

A pulley system is a type of simple machine that is used to make lifting heavy objects easier. It consists of a wheel with a groove in which a rope or chain can run. When force is applied to one end of the rope, the other end moves in the opposite direction, causing the object to move as well.

There are three types of pulleys: fixed, movable, and compound.

The mechanical advantage of a pulley system is calculated by dividing the output force by the input force. A pulley system with a higher mechanical advantage will require less input force to lift a given load than a pulley system with a lower mechanical advantage. This is why pulleys are used in many different types of machines, including cranes, elevators, and escalators.

In conclusion, if the input force is the same for each type of pulley in the graph, then the pulley with the greatest output force is the one with the highest slope or gradient.

Learn more about pulley system: https://brainly.com/question/16355111

#SPJ11

We must figure out the total voltage and current required to generate 60 watts of electricity in order to calculate the number of dry cells necessary to light the bulb.

Voltage (V) x Current Equals Power (P) (I)

We are provided 220 volts of voltage and 60 watts of power (P). Hence, the current (I) may be determined as follows:

I equals P / V at 60 W and 220 V, or 0.273 A.

We must sum the EMFs of the cells in series in order to determine the overall voltage needed to power the light using dry cells:

n times EMF = V total

the number of cells is n.

Since the EMF of each cell is 1.5 volts, the total voltage needed may be written as follows:

1.5 n V total

learn more about electricity here:

https://brainly.com/question/8971780

#SPJ4

The possible maximum carts x is 1, according to given question.

What is average?

In mathematics and statistics, an average is a measure that represents a central value of a set of data. There are different types of averages, but the most common ones are:

Mean: The arithmetic mean, often simply called the "mean", is the sum of a set of numbers divided by the total number of numbers in the set. For example, the mean of the numbers 1, 3, 5, and 7 is (1+3+5+7)/4 = 4.

To solve this problem, we need to first find the total weight of the carts. We can do this by multiplying the weight of each cart by the number of carts:

Total weight of carts = x * 1,200 pounds

Next, we can find the maximum number of carts that can be added to the rollercoaster without exceeding the weight limit. We can do this by subtracting the weight of the riders and the total weight of the carts from the weight limit and dividing the result by the weight of each cart:

Maximum number of carts = (11,000 - 2,690 - x * 1,200) / 1,200

We want to find the maximum value of x that satisfies this inequality, which means we want to find the largest integer value of x that makes the maximum number of carts a whole number. We can express this as follows:

(11,000 - 2,690 - x * 1,200) / 1,200 ≤ n, where n is a positive integer

Simplifying the inequality:

(8,110 - x * 1,200) / 1,200 ≤ n

8,110 / 1,200 - x ≤ 1,200n / 1,200

6.7583 - x ≤ n

n ≥ 7 - x

Therefore, the possible maximum number of carts is the largest integer that satisfies the inequality n ≥ 7 - x. Since n is a positive integer, the largest value of n is 6, and the largest value of x that satisfies the inequality is:

7 - x ≤ 6

-x ≤ -1

x ≥ 1

Therefore, the possible maximum carts x is 1.

To know more about average visit :-

https://brainly.com/question/130657

#SPJ1

Potential energy is stored in the elastic material when we stretch it by some distance.

The energy stored when a force is used to deform an elastic object is called elastic potential energy. The energy is conserved until the force is released and the object returns to its original shape, doing work in the process. Objects can be compressed, stretched, or twisted when deformed.

Elastic material produces elasticity when stretched or compressed. The more the material is crushed or stretched, the greater this force.

Springs have many applications, including bed springs.

To know more about potential energy, visit,

https://brainly.com/question/14427111

#SPJ4

The wavelength of the laser is 0.4464 mm.

The equation for the diffraction grating is given as:

dsinθ = mλ

where d is the distance between the slits (in meters), θ is the angle between the central maximum and the mth bright fringe (in radians), m is the order of the bright fringe, and λ is the wavelength of the light (in meters).

The equation to calculate the wavelength of a laser is λ = d × sin θ/m, where d is the distance between two adjacent slits on the diffraction grating (in this case, 1000 slits/mm, which is equivalent to 1 mm), θ is the angle of the fringe relative to the central axis (in this case, 26 degrees), and m is the order of the fringe (in this case, m=1). Therefore, plugging in the values:

λ = 1 mm × sin 26°/1 = 0.4464 mm

The wavelength of the laser is 0.4464 mm.

For more such questions on wavelength

https://brainly.com/question/3586932

#SPJ11

The hill does she travel before stopping is 97.5 m far along.

Apply law of conservation of energy.

Initial energy = Final energy

[tex]1/2 mv^2 = mgh[/tex]

Here, m is the mass, u is the velocity, 9 is the gravitational acceleration, and his the height upto which woman will incline on the hill.

Rearrange the above equation for h.

[tex]h=v^2/ 2g[/tex]

[tex]h = (10m/s)^2 / 2(9.8m/s2)\\h = 5.102m[/tex]

This is the vertical height from the ground. Now, calculate the slant height of this point.

l = h / sin3°

l = 5.102m /  sin3°

= 97.5m

The law of conservation of energy means that the total amount of energy in a closed system remains constant over time, regardless of the transformations or transfers that occur within the system. This law is based on the principle of the first law of thermodynamics, which states that the total energy of a system and its surroundings is always conserved.

It has been experimentally verified in a wide range of physical phenomena, including chemical reactions, nuclear reactions, and mechanical processes. The law of conservation of energy has profound implications for our understanding of the physical world. It implies that energy is a fundamental quantity that is conserved in all physical processes, and it forms the basis of many important theories in physics and engineering.

To learn more about Law of conservation of energy visit here:

brainly.com/question/29775341

#SPJ4

The kinetic energy k and the gravitational potential energy ug of a block sliding up an incline are both decreasing during the motion up the incline. Option C is correct .  

Energy is the capability to do work. There are two forms of energy: potential energy and kinetic energy.

Potential energy is stored energy as a result of an object's location or condition, whereas kinetic energy is the energy of motion.

The total energy of an object can be calculated as the sum of its potential and kinetic energies.

Since the block is moving up the incline, it is subjected to gravity. As a result, it must have both kinetic and potential energy.

Kinetic energy is associated with the motion of an object, while potential energy is associated with its position.

At the base of the slope, the block has a specific quantity of kinetic energy due to its motion.

It also has a specific amount of gravitational potential energy at the base of the slope since it is a certain distance above the Earth's surface.

As the block climbs the incline, it slows down due to the effect of gravity. This implies that its kinetic energy is decreasing.

At the same time, it is gaining height, which implies that its gravitational potential energy is decreasing as well. As a result, k and ug are both decreasing.

To know more about kinetic energy;https://brainly.com/question/810158

#SPJ11

The angle of repose or the angle of friction is the angle at which the block starts to slide down the inclined plane. By balancing the forces operating on the block along the inclination, it may be calculated.

The gravitational force (mg) acting downhill and the normal force (N) acting perpendicular to the inclination are the forces acting on the block. The gravitational force component perpendicular to the inclination, which is calculated as mg cos, where is the angle of the incline, and the normal force are identical in magnitude.

The block can have a maximum static friction force (Ff) applied to it without it sliding down the incline if:

Ff = μs N

where s is the static friction coefficient.

The amount of the frictional force is equal to the component of the gravitational force parallel to the inclination, which is mg sin, at the instant the block just starts to slide.

learn more about angle here:

https://brainly.com/question/28451077

#SPJ4

The nephron loop is where the countercurrent mechanism predominantly operates. The Henle loop is the name of the nephron component.

Reabsorbing water and sodium chloride from the filtrate is its principal purpose. By creating urine that is extremely concentrated, this helps the body preserve water. Kidney cross slice showing the nephron (kidney tubule) in detail and its associated blood supply.

Renal tubular fluid is defined as fluid present within the lumen of a nephron loop. Glomerular filtrate is the term used to describe the fluid found inside Bowman's capsule. Urine would be regarded as the fluid contained in the collecting duct.

The fact that loop diuretics work on the Loop of Henle gives them their name. They function by blocking NKCC2 transporters in the thick ascending limb, preventing the reabsorption of sodium, potassium, and chloride.

Learn more about Nephron here:

https://brainly.com/question/12307837

#SPJ4

The expression for steam function and potential function for the flow over the cylinder in terms of velocity potential and stream function is given as follows: Velocity potential:ψ = -∫Vv·ds; Stream function:ϕ = ∫Vv·ds; Where Vv is the velocity vector, s is the length of the path, and the integrals are taken along some path from a reference point.

What is function? A function is a mapping between sets of inputs and outputs with the property that each input is associated with one output. A function is a mathematical tool for specifying the relationship between two variables that may be expressed as an equation or a graph.

For example, in f(x) = 3x + 2, x is the input, and f(x) is the output. This function maps each input value to a unique output value. When x=1, f(1) = 5, when x=2, f(2) = 8, and so on.

To know more about potential function, refer here:

https://brainly.com/question/11621795#

SPJ11#

Answer:Two nodes and one antinodes .

Explanation:

The properties of long-lived stars compared to those of short-lived stars are options A and D. A) Long-lived stars begin their lives with more mass and a larger amount of hydrogen fuel. D) Long-lived stars are less luminous during their main-sequence lives.

Long-lived stars start their lives with more mass and a larger amount of hydrogen fuel, and long-lived stars are less luminous during their main-sequence lives. The properties of long-lived stars compare to those of short-lived stars in several ways.

Some of the characteristics of long-lived stars that differentiate them from short-lived stars:

1. Long-lived stars begin their lives with more mass and a larger amount of hydrogen fuel.

2. The gravitational forces that hold the star together cause the core to compress and heat up, causing nuclear reactions to start.

3. Because of the enormous amounts of energy released, these reactions fuel the star and cause it to shine brightly.

4. Long-lived stars are less luminous during their main-sequence lives.

5. The evolution of long-lived stars is gradual because they have a longer lifespan. It may take billions of years for them to consume all of their fuel, and they will then undergo a series of changes, including swelling up into a red giant and finally collapsing to form a white dwarf.

This process can take billions of years. The result is that they are much less luminous during their main-sequence lives than short-lived stars.

Therefore, the correct options are (A) and (D).

To know more about Long-lived stars, refer here:

https://brainly.com/question/1163176#

#SPJ11

The distance the cork will land on the table is [tex]d = 30 m[/tex]. If the mass of the bottle is 500 times the mass of the cork.

First, we need the initial velocity of the bottle is:

Using [tex]d = vt[/tex]

[tex](0.22) = (v)*(0.44)\\v = 0.5\ m/s[/tex]

Then, using the conservation of momentum, we can find the velocity of the cork

[tex]mv (bottle) = mv (cork)\\(500)*(0.1) = m(v)\\v = 250\ m/s[/tex]

Now, where the cork lands.  It starts at a vertical height of 7 cm  (the radius of the bottle and will hit the table somewhere, that is what we need to find.  Where it bounces first)

Since the cork has no initial y velocity, we can find the time it would take for it to drop 7 cm.

[tex]d = v_{o}t + 0.5at^{2}\\0.07 = (0) + (0.5)*(9.8)*(t_2)\\t = 0.120 sec[/tex]

Then, using d = vt, we can find the horizontal distance it flies in that amount of time is:

[tex]d = (250)*(0.12)\\d = 30 m[/tex]

Therefore, the distance the cork will land on the table is [tex]d = 30 m[/tex].

To know more about the distance:

https://brainly.com/question/33716087

#SPJ12

A set of beliefs can be said to be pseudoscientific if it lacks one or more of the three features of science and empirical evidence.

Pseudoscience is a set of claims, beliefs, or practices that are presented as scientific but lack empirical evidence, are inconsistent with scientific facts, or are based on incorrect assumptions. Pseudoscience can be seen in a variety of fields, including medicine, psychology, and the paranormal.

Science is defined by three characteristics: empiricism, theory construction, and parsimony or simplicity. Empiricism is the use of evidence to establish scientific facts, while theory construction is the development of a conceptual framework that explains and predicts these facts.

Parsimony is the principle that the simplest explanation is the best one, meaning that theories should not include unnecessary assumptions or complexity. However, pseudoscientific practices often lack one or more of these characteristics. They may fail to use empirical evidence or instead rely on anecdotal evidence or personal experience. Their theories may not be testable or may be inconsistent with established scientific facts. They may also be unnecessarily complex or based on assumptions that have no basis in reality.

Hence, a set of beliefs can be said to be pseudoscientific if it lacks one or more of the three features of science and empirical evidence.

To know about Pseudoscience, refer here:

https://brainly.com/question/12257058#

#SPJ11

It is difficult to make a refractor (lens) telescope larger than about 1 m in diameter because the larger the lens, the more light it has to bend and the more glass must be used; the glass must be supported in a very precise way to ensure a good image; and manufacturing and assembly errors become more common with increasing size.

There is a limit to the maximum size of a glass lens, and as the size of the lens increases, so does its weight. If the weight is too great, the lens will deform under its own weight, causing distortion in the image.Conversely, the mirrors used in reflecting telescopes are supported from behind, allowing them to be much larger and still maintain their shape.

The Hubble Space Telescope is an example of a reflecting telescope, and it has a mirror diameter of 2.4 meters.In addition to the size limitation, there are other issues with lenses, such as chromatic aberration, which occurs when the different colors of light refract at slightly different angles, causing distortion in the image. Mirrors do not suffer from this issue. The correct answer is that it is difficult to make a refractor (lens) telescope larger than about 1 m in diameter because the glass lens has a limit to its maximum size and weight, which can cause deformation in the image.

More on optical telescopes: https://brainly.com/question/22969863

#SPJ11

The nonconservative work done by the water on the athlete is 33.5 J.We can use the work-energy theorem to solve this problem.

It states that the net work done on an object is equal to the change in its kinetic energy.

The athlete starts at rest and reaches a speed of 1.00 m/s by doing the work W_1 = 171 J.

The change in the athlete's kinetic energy is ΔK = 33.5 J,

Which is equal to the net work done on the athlete.

Since the work done by conservative forces is zero, the net work done on the athlete is equal to the nonconservative work done by the water.

Therefore, the nonconservative work done by the water on the athlete is W_nc = ΔK = 33.5 J. This can be mathematically expressed as W_nc = W_1 - ΔU, where W_1 is the work done by the athlete, and ΔU is the change in the potential energy of the system.

To know more about work-energy, visit:

https://brainly.com/question/17290830

#SPJ1

The amount of heat required to raise a 2.0 kg piece of copper from [tex]20^\circ C[/tex] to [tex]250^\circ C[/tex] using the formula [tex]c = \alpha + \beta T + \delta T^{-2}[/tex] is  [tex]1.96 \times 10^{8} J[/tex].

The formula for computing the amount of heat that is required to raise the temperature of an object is expressed as:
Q = mc∆T
Where:
Q: the amount of heat needed in joules
m: the mass of the substance in kilograms
c: the specific heat capacity of the substance in joules per kilogram per kelvin
∆T: the change in temperature in kelvin

We can use the equation to calculate the amount of heat needed to raise the temperature of a 2.00-kg piece of copper from 20∘C to 250∘C. However, it's important to note that we need to first convert the given temperatures from Celsius to Kelvin.

[tex]20^\circ C + 273 = 293 K[/tex] (Initial temperature)

[tex]250^\circ C + 273 = 523 \ K[/tex] (Final temperature)

We can now substitute the values into the formula, Q = mc∆T to get the amount of heat required.

[tex]Q = mc\Delta T[/tex]

[tex]Q = (2.00 \ kg) (\alpha + \beta T + \delta T^{-2}) (\Delta T)[/tex]

[tex]Q = 2.00 kg (\alpha\Delta T + \beta \Delta T^2 + \delta \Delta T^3)[/tex]

[tex]Q = 2.00 kg [(\alpha(523 \ K - 293 \ K) + \beta (523 K^2 - 293\ K^2) + \delta(523 \ K^3 - 293 \ K^3)][/tex]

[tex]Q=2.00 kg [(349 J/kgK \times 230\ K) + (0.107 J/kgK^2 \times 230 K^2) + (4.58 \times 10^5 JkgK \times 230 K^3)][/tex]

[tex]Q = 2.00\ kg [80270\ J + 24.61\ J + 9.8 \times 10^{7} \ J][/tex]
[tex]Q = 1.96 \times 10^{8} J[/tex]
Therefore, the amount of heat that is required to raise a 2.00-kg piece of copper from [tex]20^\circ C[/tex] to 250° C is [tex]1.96 \times 10^{8} J[/tex].

Learn more about heat:

https://brainly.com/question/934320

#SPJ11

A mass on a spring will oscillate with such a period if it is coupled to a spring of spring constant k. (T). T = 2(m/k) describes this. The frequency of the oscillation would be = k/M.

By summing the masses of the each individual atom inside the compound's formula, the formula mass is determined. The ions can be regarded as atoms for the purposes of determining the formula mass since a valid formula was neutral (when no net electron gained or lost).

Imagine a spring with an unstretched length l, a spring constant of k, and a mass M dangling from it. The resonant frequency would be k/M if the spring's mass were ignored. According to the rule that was cited, the impact of the spring masses would be to change M in the equation for to M + m/3.

To know more about oscillate visit:

https://brainly.com/question/9820984

#SPJ1

Polar stratospheric clouds are high-altitude clouds made of tiny ice crystals that form in the lower stratosphere at very cold temperatures. They exhibit vivid iridescent colors and are associated with ozone depletion.

High-altitude clouds comprised of microscopic ice crystals are referred to as polar stratospheric clouds, nacreous clouds, or mother-of-pearl clouds. At heights of around 15,000 to 25,000 meters and extremely low temperatures of minus 80 to minus 85 degrees Celsius, they occur in the lower stratosphere. The refraction of sunlight as it passes through the ice crystals gives these clouds their distinctive dazzling and vibrant iridescent colors. Polar stratospheric clouds, which are linked to the ozone layer's thinning, are most frequently seen during the winter in polar locations like the Arctic and Antarctic.

learn more about High-altitude clouds here:

https://brainly.com/question/29637430

#SPJ4

Answer:

Explanation:

What type of repetitions are completed with an intentionally reduced range of motion?