strength in milligrams is 0.3mg
What is Strength?Mass of the solute in grams/Volume of the solution in litres equals the strength of the solution. The overall formula must be multiplied by 1000 if the volume is measured in millilitres (mL). The concentration of the solution, measured in grammes per litre, can be used to determine the solution's strength.
Molarity - The moles of solute per litre of solution is measured as molarity. For instance, when table salt is dissolved in water, water serves as both the solution and the solute. Sodium chloride weights 58.44 grammes per mole. One molar solution, or 1M, is created by dissolving 58.44 grammes of sodium chloride in one litre of water.
Relation between Molarity and Strength?
The volume of solute in one litre of a solution determines its strength. As a result, a solution's strength is calculated by multiplying its molecular mass by its molarity.
1 grain = 64.8 milligrams.
1/200 grains = 64.8/200
= 0.3mg
to know more about Molarity and Strength go to - https://brainly.com/question/1395425
#SPJ4
AHHH I need help ASAP what does TAILS stand for in science??
does liquid evaporate with adding heat or losing it
300,000,000 m/s is the speed of ?
Answer:
671080887.616
Explanation:
please help... will give brainiest
Answer:
The answer will be ：
In year 1869
Russian scientist named Dmitri Mendeleev
Chart called Mendeeleves periodic table
increasing atomic masses
physical and chemical properties.
Hope this Helps
Best of luck ！！
1. Which of the following seismic waves is detected first by the seismograph?
A L-waves B P-waves
CR-waves D.S-waves
Answer:
AL- waves
Explanation:
because it is famousable
What are the elements in group two called
Answer: Alkaline-earth metal, any of the six chemical elements that comprise Group 2 (IIa) of the periodic table. The elements are beryllium (Be), magnesium (Mg), calcium (Ca), strontium (Sr), barium (Ba), and radium (Ra). Hopefully i helped
Explanation:
Answer: Alkaline-earth metal
Explanation:
which form of molecular motion do liquids experience?
A translation,rotational,& vibrational
B vibrational and rotational
C translational and rotational
D transitional only
Answer:
I'm pretty sure that liquid moves by vibration
Explanation:
I asked my cousin
What is the VSEPR shape of BHI2?
a.) bent
b.) trigonal planar
c.) trigonal pyramidal
d.) tetrahedral
e.) linear
Answer:
The answer is B
Explanation:
honestly do
A thermochemical equation indicates the absorption or release of heat in addition to the reactants and products involved in the chemical reaction. The amount of energy available for conversion into heat is represented by a triangle H does this term stand for?
Answer:
A. Enthalpy of the reaction
Explanation:
A Thermochemical equation is a balanced stoichiometric chemical equation that indicates the absorption or release of heat in addition to the reactants and products involved in the chemical reaction. The amount of energy available for conversion into heat is represented by ΔH, a this term which stands for the enthalpy change, ΔH.
The Enthalpy of Reaction or Heat of Reaction is the amount of energy in the form of heat transferred during a chemical reaction that occurs at a constant pressure. It is useful for calculating the amount of energy per mole either released or produced in a reaction, therefore is unit is kJ/mol.
In a reaction where energy is absorbed by the reactants during the formation of products, ΔH is positive. On the other hand, in a reaction where energy is released by the reactants during the formation of products, ΔH is negative.
The enthalpy change, ΔH of reactions are determined experimentally under standard conditions of 1 atm and 25 °C (298.15K). Enthalpy can be measured experimentally through the use of a calorimeter. A calorimeter is an isolated system which has a constant pressure and in which heat loss to the surroundings is minimal.
6. What are formed from the chemical reaction of the substances given
below? Write the balanced chemical reaction as well.
a) when calcium carbonate and hydrochloric acid react with eachother
CaCO3(s) + 2HCl(aq) → CaCl2(aq) + H2O(l) + CO2(g)
What is the correct IUPAC name for CuNO₃?
Answer:
Copper(i) nitrate
Explanation:
That is the correct name.
Answer:
Molecular Formula
Explanation:
Oxygen has 8 positively charged protons what is the number of negatively charged electrons in an atom of oxygen?
Answer:
8 electrons (e-)
Explanation:
In the atom of every elements, there are three sub-atomic particles namely: protons, electrons, and neutrons. The protons are the positively charged particles, the electrons are negatively charged while the neutrons are neutrally charged.
In an uncharged or neutral atom i.e. charge 0, the number of protons is always equal to the number of electrons because they cancel each other out. When a difference occurs in the number of these particles, the atom becomes charged i.e. an ion. According to this question, oxygen atom (O) contains 8 positively charged protons, this means that it also contains 8 negatively charged electrons in its atom.
10. Johnny pushed a wheel borrow that was 50kg, if the net force on the
wheel borrow is 15N east, what is the wheel borrows acceleration?
Which of the following is true about the electron configuration of the noble gas
A. The highest occupied s and p orbitals are partially filled.
B. the highest occupied s and p orbitals are completely filled.
C. the electrons with the highest energy are in a f sub level
D. the electrons with the highest energy are in a d sublevel
Answer:
Noble gases have very stable electron configuration and does not need to gain electrons, only when they gain energy. 1) For example, krypton is a chemical element with symbol Kr and atomic number 36, which means it has 36 protons and 36 electrons.
Answer: I think it’s B, The highest occupied s and p sub levels are completely filled.
Explanation:
Which statements reflect the process of electrolysis? Check all that apply. Water is formed from ions of hydrogen and oxygen. The electrical reactions in a rechargeable battery can be reversed. The cathode becomes the electrode for reduction. The cathode takes on the metal deposits or layers. Decomposition of ores produces separated elements. Decomposition of ores produces low energy products.
Answer:
Decomposition of ores produces separated element.
Answer: it’s b, d, and e
Explanation: i just did it, hope this helps :)
What happens to potential energy as kinetic energy increases during a roller coaster ride?
Answer:
On a roller coaster, energy changes from potential to kinetic energy and back again many times over the course of a ride. Kinetic energy is energy that an object has as a result of its motion. Potential energy is the energy an object has as a result of its position
Explanation:
5. A boat travels 325,000 meters in 800 seconds. What was its speed?
Answer:
406m/s
Explanation:
Speed = distance ÷ time
Answer:
406 m/s
Explanation:
Divide 325,000 meters by 800 and 800 seconds by 800 (because we are trying to find the speed in meters per second.
325,000÷800 = 406.25 meters
800÷800 = 1 second
≈ 406 m/s
Where does photosynthesis occur in a plant cell? In what part of a plant cell does photosynthesis occur?
Explanation:
In plants, photosynthesis takes place in chloroplasts, which contain the chlorophyll.
Answer:
chloroplasts
In plants, photosynthesis takes place in chloroplasts, which contain the chlorophyll
Explanation:
In plants, photosynthesis takes place in chloroplasts, which contain the chlorophyll. Chloroplasts are surrounded by a double membrane and contain a third inner membrane, called the thylakoid membrane, that forms long folds within the organelle.
20.What do carbon and silicon have in common?
a.They belong to the same column (family), therefore they have the same number of valence electrons.
b.They belong to the same column (family), therefore they have the same number of total electrons.
c.They belong to the same column (family), therefore they have the same number of energy levels.
d.They belong to the same column (family), therefore they have the samenumber of protons.
The carbon and silicon have in common that they belong to the same column (family), therefore they have the same number of total electrons. So, option B is correct.
What do carbon and silicon have in common?Carbon's closest analogue is silicon. Silicon and carbon are both tetravalent atoms that primarily form covalent (non-ionic) compounds. However, aside from the fact that both elements "can form four covalent bonds," there is surprisingly little in common between them.
Carbon has an atomic number of 6 and an electronic configuration of 2, 4. Silicon has an atomic number of 14 and an electronic configuration of 2, 8, 4. Because both elements have the same number of valence electrons, they are classified as being in the same group.
Thus, option B is correct.
To learn more about the carbon and silicon, follow the link;
https://brainly.com/question/1966406
#SPJ1
how many atoms of helium are required to equalise the
mass of a silver atom ?
The atoms of helium are required to equalize the mass of a silver atom is 8.4 x 10 ⁻⁴⁸.
What are atoms?Atoms are the minute particles that are present inside elements.
Atomic mass of silver is 107.86 g/mol
Mass of one atom of silver will be
[tex]\dfrac{ 107.86 }{6.022 \times 10^{-23}} = 1.79 \times 10^2^4[/tex]
Atomic mass of helium is 6.941
[tex]\dfrac{6.022 \times 10^{-23}}{4.0 \times 1.79 \times 10^2^4 } = 8.4 \times 10^{-48}[/tex]
Thus, the atoms of helium are required to equalize the mass of a silver atom is 8.4 x 10 ⁻⁴⁸.
Learn more about atoms
https://brainly.com/question/1566330
#SPJ1
Find the percent composition of chromium(|||) fluoride (CrF3), which is commonly used as a dye in textiles
Answer:
%Cr = 47.71%
%F = 52.29%
Explanation:
To do this, we need the atomic weights of all the elements in the chromiun fluoride, which are the following:
Cr: 51.996 g/mol
F: 18.998 g/mol
With these atomic weights, let's calculate the molecular mass of the chromium fluoride:
MM CrF₃ = (51.996) + (18.998 * 3) = 108.99 g/mol
Now, to get the percent composition, all we have to do is divide the atomic weight of each element by the molecular mass, and then, multiply by 100%:
% = (AW / MM) * 100
Replacing with each element:
%Cr = (51.996 / 108.99) * 100
%Cr = 47.71%%F = 100 - 47.71
%F = 52.29%Hope this helps
The water cycle describes the movement of water on Earth. Water in oceans and lakes evaporates and turns into water vapor. This water vapor condenses and forms clouds which produce precipitation. Precipitation falls all over the Earth's surface. The water eventually comes back to the oceans through run-off. Which steps in the water cycle carry water out of an ocean and into a freshwater lake?
A. Evaporation and precipitation
B. Rivers and streams
C. Underground tunnels
D. Condensation and run-off
Answer:
c. Underground tunnels
Explanation:
Yes, water below your feet is moving all the time, but, no, if you have heard there are rivers flowing below ground, that is not true. Water moves underground downward and sideways, in great quantities, due to gravity and pressure. Eventually it emerges back to the land surface, into rivers, and into the oceans to keep the water cycle going.
Note: This section of the Water Science School discusses the Earth's "natural" water cycle without human interference.
The steps in the water cycle that carries water out of the ocean into a freshwater lake are rivers and streams.
What is the water cycle?The water cycle is used to describe the movement of water in the ecosystem. It involves the various processes through which water can move in the universe.
The steps in the water cycle that carries water out of the ocean into a freshwater lake are rivers and streams.
Learn more about water cycle:https://brainly.com/question/1151425
#SPJ6
Denise was driving east over a hill in the afternoon, shortly after a rain shower. Suddenly the sun broke through the clouds, and she saw a rainbow ahead of her. Which of the following made the rainbow possible?
Answer: A. Raindrops act like a prism and separate the white light in sunlight.
Explanation:
The reason for the formation of rainbow is option A. Raindrop acts like a prism and separate the white lite into different colors.
What is rainbow?Rainbow is an arc of colors from a white light ray which can be formed by the separation of component colors from white light by the combination of reflection, and refraction.
White light absorbs all colors and reflect all of them. That is why a white object is seen white the mix of all colors. When the white light passes through a raindrop, it gets refracted, the refracted light then reflects from the drop and undergo one more refraction and that make the component colors in the form a bent or arc.
Therefore, raindrop is acting like a prism to separate the white light into its component colors. Hence, option A is correct.
Find more on rainbow:
https://brainly.com/question/15172132
#SPJ6
.
The monkeys at the zoo swing wildly from branch to branch.
Answer:
epic
Explanation:
hakuna matata
PLS HELP *10 POINTS* I WILL GIVE BRAINLIEST
Answer:
Eurkaryote... sorry if i wrong
Explanation:
What is the boiling point of water?
A. 0°C
B. 50°C
C. 70°C
D. 100°C
Answer:
D) 100*C
Explanation:
Answer:
A. 0°C
Explanation:
El agua se evapora a los 0 grados
Given three (3.00) moles of gold (Au), how many grams do you have?
a. 66 g
b. 197 g
C. 591 g
d. 6.02 x 1023 g
(b) in what way are carbon dioxide and orange juice similar?
Answer:
The effects of supercritical CO2 (SC-CO2) on the microbiological, sensory (taste, odour, and colour), nutritional (vitamin C content), and physical (cloud, total acidity, pH, and °Brix) qualities of orange juice were studied. The CO2 treatment was performed in a 1 litre capacity double-walled reactor equipped with a magnetic stirring system. Freshly extracted orange juice was treated with supercritical CO2, pasteurised at 90°C, or left untreated. There were no significant differences in the sensory attributes and physical qualities between the CO2 treated juice and freshly extracted juice. The CO2 treated juice retained 88% of its vitamin C, while the pasteurised juice was notably different from the fresh juice and preserved only 57% of its vitamin C content. After 8 weeks of storage at 4°C, there was no microbial growth in the CO2 treated juice.
As stated in the article, “As Sticky as a Gecko . . . but Ten Times Stronger!,” the adhesive the researchers developed sticks best when it is pulled down parallel to the surface. What type of adhesion is this called?
The answer is Shear Adhesion, i just took the test on 21 edge.
Answer:
shear adhesion
Explanation:
edge
Shear adhesion sticks best when it is pulled down parallel to the surface.
What is shear adhesion?Shear adhesion is defined as the ability of tape due to which it resists the static forces which are applied in same plane as in backing.It is usually expressed in terms of time required by a given weight for an amount of tape to become loose from a vertical plane.
Molecular weight between two entanglements is the controlling factor of shear adhesion. Shear adhesion is affected by the following parameters which areas follows:
1)Tg of adhesive - Shear adhesion increases as Tg rises up to a certain temperature which is less than the room temperature.
2) Tan delta minimum value of adhesive- It is found that shear adhesion improves by an increase in tan delta minimum value.
3)Adhesive polarity- It is an important factor which affects adhesion such as tack,peel and shear.Adhesion performances are improved by introducing polar ingredients in the formulation.
Learn more about shear adhesion,here:
https://brainly.com/question/13385447
#SPJ6
1. X-linked (also called sex-linked traits) are inherited on the _____ chromosome.
Answer:
Genes on the X chromosome are said to be X-linked. X-linked genes have distinctive inheritance patterns because they are present in different numbers in females (XX) and males (XY). X-linked human genetic disorders are much more common in males than in females due to the X-linked inheritance pattern.
Explanation: