The velocity of the bird would be 4.16 m/s².
What is instantaneous velocity?The velocity of a body at any specific instant of time is called instantaneous velocity. Mathematically, we can write -{v} = dx/dt
Given is that a bird is flying due east. Its distance from a tall building is given by -
x{t} = 29 + 12.8t - 0.0450t³
Instantaneous velocity is given by -
{v} = dx/dt ... Eq { 1 }
Now -
v = dx/dt = d/dt (29 + 12.8t - 0.0450t³)
v = dx/dt = 0 + 12.8 - (3 x 0.0450t²)
v = dx/dt = 12.8 - 0.135t²
v{8} = dx/dt = 12.8 - 0.135 x 8 x 8
v{8} = dx/dt = 12.8 - 8.64
v{8} = dx/dt = 4.16
Therefore, the velocity of the bird would be 4.16 m/s².
To solve more questions on instantaneous velocity, visit the link below -
https://brainly.com/question/28837697
#SPJ1
A displacement-time graph is drawn below.
Displacement (m)
80
5
12
20 Time (s)
Find the displacement for the whole journey.
The total displacement of the journey is 80 m.
What is the displacement?Displacement is a vector quantity that describes the change in position of an object from its initial position to its final position in a given reference frame.
It is equal to the difference between the final position and the initial position of an object and is commonly used in physics and engineering to describe motion. Displacement is usually measured in units of length such as meters.
The graph can show us the that point of the highest displacement is 80m.
Learn more about displacement:https://brainly.com/question/30087445
#SPJ1
A sprinter with a mass of 70 kg accelerates at a rate of 5 m/s2. What force is the sprinter exerting?
Answer:
The force exerted by the sprinter can be calculated using Newton's second law of motion, which states that the force acting on an object is equal to its mass multiplied by its acceleration:
F = m * a
where:
F is the force
m is the mass of the object (70 kg)
a is the acceleration (5 m/s^2)
Plugging in the values, we get:
F = 70 kg * 5 m/s^2
F = 350 N
So, the sprinter is exerting a force of 350 N. This is the force that the sprinter's legs are applying to the ground, propelling them forward and producing the acceleration.
Starting from a location with position vector 1,=−18.7 m
and 1,=21.5 m
, a rabbit hops around for 10.7
seconds with average velocity ,=−2.17 m/s
and ,=1.71 m/s
. Find the components of the position vector of the rabbit's final location, 2,
and 2,
^ is the same as the picture
The components of the position vector of the rabbit's final location r₂, x and r₂, y is 36.77 m.
How to calculate position?To find the final location of the rabbit, calculate the displacement of the rabbit, which is given by the product of average velocity and time.
r₂, x = 1, + vx x t = -18.7 - 2.17 x 10.7 = -43.77 m
r₂, y = 1, + vy x t = 21.5 + 1.71 x 10.7 = 36.77 m
Therefore, the components of the position vector of the rabbit's final location are r2x = -43.77 m and r2y = 36.77 m.
Learn more on displacement here: https://brainly.com/question/2109763
#SPJ1
A hot-air balloonist, rising vertically with a constant velocity of magnitude v=5.00 m/s, releases a sandbag at an instant when the balloon is a height h=40.0m above the ground (Figure 1). After it is released, the sandbag is in free fall. For the questions that follow, take the origin of the coordinate system used for measuring displacements to be at the ground, and upward displacements to be positive.
A) Compute the position of the sandbag at a time 0.245 s after its release.
B) Compute the magnitude of the velocity of the sandbag at a time 0.245s after its release.
C) Determine the direction of the velocity of the sandbag at a time 0.245 s after its release.
D) Compute the position of the sandbag at a time 1.15 s after its release.
E) Compute the magnitude of the velocity of the sandbag at a time 1.15 s after its release.
F) Determine the direction of the velocity of the sandbag at a time 1.15 s after its release.
a. The position of the sandbag at a time 0.245 s after its release is 39.706 m from the ground.
b. The magnitude of the velocity of the sandbag at a time 0.245 s after its release is 2.4 m/s.
c. The direction of the velocity of the sandbag at a time 0.245 s after its release is to the ground.
d. The position of the sandbag at a time 1.15 s after its release is 33.52 m from the ground.
e. The magnitude of the velocity of the sandbag at a time 1.15 s after its release is 11.27 m/s.
f. The direction of the velocity of the sandbag at a time 1.15 s after its release is to the ground.
According to the free-fall motion, when an object is released without an initial velocity from a certain height the object will experience acceleration due to the gravitational force of the earth. The non-uniform motion formula
v = u + at
d = (u × t) + 0.5at²
u = initial velocity = 0t = time (s)a = accelerationThe formula for free-fall motion become
v = u + at ⇒ v = gt
d = (u × t) + 0.5at² ⇒ d = 0.5gt²
When the sandbag is released by the balloon at h = 40.0 m, it moves in a free-fall motion.
At t = 0.245 s
The sandbag traveledAt t = 1.15 s
The sandbag traveledLearn more about free-fall motion here: brainly.com/question/127788
#SPJ1
An orange of mass 125 g falls from a branch to the ground 3.50 m below. (a) Relative to the ground, what is the gravitational potential energy of the orange on the branch? On the ground? (b) Relative to the branch, what is the gravitational potential energy of the orange on the branch? On the ground? J (c) During the orange's fall, what is its change in gravitational potential energy relative to the ground? Relative to the branch?
(a) Relative to the ground, the gravitational potential energy of the orange on the branch is 4.29 J and on ground is 0 J.
(b) ) Relative to the branch, the gravitational potential energy of the orange on the branch is 0 J and on ground is 4.29 J.
(c) The change in potential energy relative to the ground is -4.29 J and relative to the branch is 0 J.
What is the gravitational potential energy?Relative to the ground, the gravitational potential energy of the orange on the branch is calculated as follows;
P.E = mgh
where;
m is the mass of the orangeh is the height of the branch above the groundg is acceleration due to gravityP.E = 0.125 kg x 9.8 m/s² x 3.5
P.E = 4.29 J
The gravitational potential energy of the orange on the ground is calculated as follows;
P.E = mgh
P.E = m x g x 0 m
P.E = 0 J
The change in potential energy = final potential energy - initial potential energy
change in potential energy relative to ground = 0 J - 4.29 J = - 4.29 J
change in potential energy relative to branch = 4.29 J - 4.29 J = 0
Learn more about gravitational potential energy here: brainly.com/question/15896499
#SPJ1
During a typical afternoon thunderstorm in the summer, an area of 57.0 km2 receives 5.81 X 10^8 gal of rain in 18 min. How many inches of rain fell during this 18 min period?
1.5189 inches of rain fell during this 18 min period.
What is the unit of rainfall?The amount of rain that fell in total over a specific time period, measured in millimeters, is the most typical rainfall measurement.
Area = 57.0 km² = 57.0 × 1000 × 1000 m²
Volume of water = 5.81 × 10⁸ gallon = 5.81 × 10⁸ × 0.00378541 m³ = 2199323.21 m³
Hence, the height of the rain water
= (2199323.21 m³) ÷ (57.0 × 1000 × 1000 m²)
= 0.03858 m
= 0.03858 × 39.3701 inch
= 1.5189 inch
So, 1.5189 inches of rain fell during this 18 min period.
Learn more about rainfall here:
https://brainly.com/question/28576955
#SPJ1
How much does a spring with a spring constant of 650 N/m need to be compressed in order to store 20.0 J of elastic potential energy?
The spring needs to be compressed by 0.175 meters in order to store 20.0 J of elastic potential energy.
What is elastic potential energy?Elastic potential energy is the energy stored in an object when it is deformed or stretched due to an applied force. It is present in springs, rubber bands, and other elastic materials that can be stretched and then return to their original shape.
The amount of elastic potential energy stored in an object is directly proportional to the amount it is stretched or compressed, and is proportional to the square of the deformation. The formula for elastic potential energy is given by U = (1/2)kΔx^2, where U is the elastic potential energy, k is the spring constant, and Δx is the change in length of the object. When the force is removed, the stored elastic potential energy is converted into kinetic energy, causing the object to return to its original shape.
Learn more about elastic potential energy, here:
https://brainly.com/question/12807194
#SPJ1
A piece of lithium goes from 65 Celsius to 200 Celsius what state of matter would be expected to be in 
At 65°C, lithium is a solid. At 200°C, liquid would be the state of matter.
What is state of matter?State of matter refers to the physical form in which a substance exists. There are four main states of matter: solid, liquid, gas, and plasma. In a solid, particles are closely packed together and have a fixed shape and volume. In a liquid, particles are close together but can flow and take the shape of their container. In a gas, particles are widely spread out and have a much larger volume and take the shape and volume of their container. In plasma, particles are highly ionized and have unique electrical and thermal properties.
To know more about thermal properties, visit:
https://brainly.com/question/19429265
#SPJ1
How does understanding the formation of the sun contribute to understnading how it releases electromagnetic energy, including sunlight, which allows Earth to be what it is today?
Radiant energy that moves in waves at the speed of light is known as electromagnetic energy. Radiant energy, electromagnetic radiation, electromagnetic waves, light, or the movement of radiation are other names for it.
What is Electromagnetic waves?James Clerk Maxwell, a 19th-century physicist whose research had a major impact on the development of quantum mechanics, discovered electromagnetic radiation.
We can think of electromagnetic energy or radiation functioning similarly to a typical ocean wave in terms of how it operates. The radiation is the water in this analogy.
Radiation from an electromagnetic field can transfer heat. Heat, energy, or light waves are transmitted from one place to another across a vacuum or a medium using electromagnetic waves.
Therefore, Radiant energy that moves in waves at the speed of light is known as electromagnetic energy. Radiant energy, electromagnetic radiation, electromagnetic waves, light, or the movement of radiation are other names for it.
To learn more about Radiant energy, refer to the link:
https://brainly.com/question/30288262
#SPJ1
The lowest pressure ever obtained in a laboratory setting is 4.0×10−11 Pa. At this pressure, how many molecules of air would there be in a 50 Celsius experimental chamber with a volume of 0.060 m3?
There would be 5.38 × 10¹⁹ number of molecules of air at that condition.
What is ideal gas?A theoretical gas known as an ideal gas is made up of several randomly moving point particles with no interparticle interactions.
Because it abides by the ideal gas law, a condensed equation of state, and is amenable to statistical mechanics analysis, the ideal gas concept is helpful.
The amount of air = PV/RT
= (4.0 × 10 ⁻¹¹× 0.060)/ 8.314 ×(273 + 50) mole
= 8.93714 × 10⁻⁵ moles.
molecules of air would there be = 8.93714 v × 6.023 × 10²³ = 5.38 × 10¹⁹
Learn more about ideal gas here:
https://brainly.com/question/28257995
#SPJ1
Please answer this question
A mechatronic system can be a common household appliance such as a washing machine, a car engine, or an industrial production line.
Using the parts above, what is the washing machine component?For example, in a washing machine, the actuators could be the DC motors that control the drum's rotation, the solenoids that control water flow, and the voice coils that control the drum's position.
The sensors could be switches that detect the lid's position, the photoelectrics that detect the presence of clothes, and the potentiometers that measure the drum's position.
The input signal conditioning and interfacing could be the discrete circuits that filter and amplify the signals from the sensors.
The graphical displays could be the LED lights that indicate the status of the machine, and the output signal conditioning and interfacing could be the amplifiers and power transistors that control the actuators.
The digital control architecture could be the microcontroller that implements the control algorithms and sequences the operations of the machine.
This is just an example of how to map a mechatronic system, and the components and their arrangement can vary greatly depending on the specific system being analyzed.
Learn more about actuators form
https://brainly.com/question/12950640
#SPJ1
Use the following information to answer questions 2-4. Two people are playing a game of
tug-of-war with the rope attached to a mass of 25 kg at the center. The person pulling to
the left pulls with a force of 20 N. The person pulling to the right pulls with a force of 10 N.
2. Which direction will the 25 kg mass move?
a. Left
b. Right
C. It will not move
How do you know?
What will the velocity of the mass be after 1 second?
What will the velocity of the mass be after 2 seconds?
The direction in which the 25 kg mass will move is to the Left. The correct option is A.
This is because the force pulling to the left is greater than that to the right.
The velocity of the mass after 1 second will be 0.4 m/s
The velocity of the mass after 2 seconds will be 0.8 m/s
What is the net force on the mass of 25 kg?The net force o the mass of 25 kg is given below:
Net force = 20 N - 10 N
Net force = 10 N
The velocity of the mass is given by the formula below:
Velocity = net force * time / mass
velocity after 1 second = 10 * 1 / 25
velocity after 1 second = 0.4 m/s
velocity after 2 seconds = 10 * 2 / 25
velocity after 2 seconds = 0.8 m/s
Learn more about net force and velocity at: https://brainly.com/question/29112524
#SPJ1
A very thin sheet of brass contains two thin parallel slits. When a laser beam shines on these slits at normal incidence and room temperature (20.0 ∘C ), the first interference dark fringes occur at ± 26.6∘ from the original direction of the laser beam when viewed from some distance. If this sheet is now slowly heated up to 135 ∘C , by how many degrees do these dark fringes change position? Coefficient of linear expansion for brass is α=2.0×10−5(∘C)−1 . Ignore any effects that might occur due to change in the thickness of the slits. (Hint: Since thermal expansion normally produces very small changes in length, you can use differentials to find the change in the angle.)
We do not know the value of L0 and d, we cannot calculate the exact change in angle. However, we can find the order of magnitude of Δθ by using the values given in the problem.
How solve the problem?The change in the angle can be calculated by using the formula for linear expansion: ΔL = L0 * α * ΔT, where ΔL is the change in length, L0 is the initial length, α is the coefficient of linear expansion, and ΔT is the change in temperature.
We can assume that the distance between the two slits is the length L0. The change in length ΔL will cause a change in the angle of the dark fringes, which can be calculated using the formula: Δθ = ΔL / d, where Δθ is the change in angle and d is the distance from the slits to the observation point.
So, ΔL = L0 * α * ΔT = L0 * α * (135 - 20)
Δθ = ΔL / d
Substituting the given values, we get:
Δθ = L0 * α * (135 - 20) / d
= L0 * 2.0 x 10^-5 * 115 / d
Since we do not know the value of L0 and d, we cannot calculate the exact change in angle. However, we can find the order of magnitude of Δθ by using the values given in the problem.
Learn more about magnitude in brainly.com/question/15681399
#SPJ1