A bicyclist is finishing her repair of a flat tire when a friend rides by with a constant speed of 4.8 m/s. Two seconds later the bicyclist hops on her bike and accelerates at 2.2 m/s2 until she catches up with her friend.

A. How much time, counting from the moment she hops on her bike, does it take until she catches up?

B. How far does she travel in this time?

Zigzagging mountain roads offer several advantages from the viewpoint of energy conservation and power: Reduced gradient. Improved traction. Reduced stress on the road. Easier construction

What advantages do Zigzagging mountain roads have?

Zigzagging mountain roads also known as switchbacks have several advantages with respect to energy conservation and power: Reduced gradient: Switchbacks allow the road to have a shallower gradient compared to a straight road, which reduces the amount of energy required to climb the mountain. This can save fuel for vehicles and reduce the physical exertion for hikers and cyclists. Improved traction: The zigzagging design provides better traction for vehicles and reduces the risk of skidding or slipping, especially in wet or icy conditions. Reduced stress on the road: A straight road up a steep mountain would experience higher stress and wear and tear, which could lead to damage or even collapse. Zigzagging the road reduces the stress and prolongs the road lifespan. Easier construction: Building a straight road up a steep mountain would require much more excavation and engineering work, making it a more expensive and time-consuming process. Zigzagging the road allows for easier and more efficient construction.

Overall, the switchback design of mountain roads is a more efficient and practical solution that conserves energy, improves safety, reduces stress on the road, and makes construction easier.

To know more about Zigzagging mountain roads, visit:

https://brainly.com/question/13961942

#SPJ1

Answer:

I = M L^2      description of moment of inertia I

Only (B) and (C) are useful because L is very small along the length

(C)  has the largest momejnt:

    I = M L^2 / 3 for a thin rod about one end

(I = M L^2 / 12 for a rod about its midpoint)

The total force required to cause an object with a mass of 10 kg to gain 5 meters per second every second is 50 newtons. To calculate the force required to cause this acceleration, we simply applied Newton's second law of motion here.

The force required to cause an object with a mass of 10 kg to accelerate at a rate of 5 meters per second every second can be calculated using Newton's second law of motion, which states that the force F required to accelerate an object of mass m at a rate of a is given by:

F = m * a

In this case, the acceleration a is 5 meters per second every second. Substituting m = 10 kg and a = 5 meters per second every second into the above equation, we get:

F = 10 kg * 5 meters per second every second

= 50 newtons

Therefore, the total force required to cause an object with a mass of 10 kg to gain 5 meters per second every second is 50 newtons.

The force required to cause an object to accelerate depends on its mass and the rate of acceleration. The mass of an object is a measure of its resistance to changes in motion, while the rate of acceleration is a measure of how much the object's velocity changes per unit of time. Newton's second law of motion, which relates force, mass, and acceleration, is one of the fundamental laws of physics and is used to understand and predict the motion of objects under the influence of forces.

In this case, we were given the mass of the object, which is 10 kg, and the rate of acceleration, which is 5 meters per second every second. To calculate the force required to cause this acceleration, we simply applied Newton's second law of motion, which states that the force required to accelerate an object is equal to the product of its mass and acceleration.

Learn more about force here:

https://brainly.com/question/26115859

#SPJ4

A preferred 2-liter bottle contains 67.6 fluid ounces. of liquid. Assuming which you're using 8-ounce cups, you could have 8.45 glasses of a few issue liquid is inside the 2-liter bottle.

An ounce is a unit of measurement commonly used for weighing small amounts of mass or weight. It is equivalent to 28.35 grams or 1/16th of a pound. Ounces are commonly used to weigh food items, such as fruits, vegetables, and meats, as well as precious metals like gold and silver.

In the United States, ounces are also used to measure liquid volume, with one fluid ounce equaling approximately 30 milliliters. Ounces are divided into different types, including avoirdupois ounces and troy ounces. Avoirdupois ounces are used to measure most common items, while troy ounces are primarily used for precious metals like gold and silver.

To learn more about Ounce visit here:

brainly.com/question/29374025

#SPJ4

Complete question: -

How many oz does a 2 liter bottle hold?

The photons that make up electromagnetic radiation each have a distinct quantity of energy known as a quantum.

An electromagnetic wave makes up a photon, a small particle. They are both massless and chargeless. They can be compared to a small packet pure light energy. A quantum, or discrete packet comprising energy or matter, is an example.

wavemeter: a tool for measuring the separation between subsequent wavefronts of an electromagnetic wave that are in phase. By measuring the wave's frequency, the decision is frequently made indirectly.

To know more about electromagnetic visit :

https://brainly.com/question/17057080

#SPJ4

Answer:

  16.6 V

Explanation:

You want the voltage of a battery that delivers 0.255 Amps to a series circuit consisting of a 25Ω resistor and a 40Ω resistor.

The voltage is the product of the current and the resistance:

  V = IR

  V = (0.255 A)(25 +40Ω) = 0.255·65 V = 16.575 V ≈ 16.6 V

The voltage of the battery is about 16.6 volts.

__

Additional comment

We rounded to 3 significant figures because the problem values are given to that precision.

Answer: d1ldo

Explanation:

The word "thermodynamics" is derived from two Greek words "therme" meaning heat and "dynamic" meaning power. The word thermodynamics was first used in the late 19th century.

Thermodynamics is the branch of physics that deals with the relationships between heat and other forms of energy, such as work, mechanical, chemical, and electrical energy. The term thermodynamics was first used in the scientific literature by Scottish physicist James Clerk Maxwell in 1871.

The concept of thermodynamics is based on the principle that energy cannot be created or destroyed, only transformed from one form to another. It also deals with the study of energy transfer, the laws of thermodynamics, and how these laws relate to the behavior of physical systems. This field has a wide range of applications, including the design of heat engines, the study of phase transitions, and the understanding of thermal and thermochemical processes.

Learn more about thermodynamics

brainly.com/question/14265296

#SPJ4

(a) As σ is increased, The minimum  angle will be "19.2°".

(b) The acceleration will be "0.91 m/s²"once the box has began to move.

(c) The speed will be "3 m/s" as the box slid a distance 4.7 m along the loading map.

According to the question,

Mass = 25.0 kg

Kinetic friction = 0.25

Coefficient of static friction = 0.35

(a) We know,

⇒ static friction = mg sine

⇒ mg cosine * u = mg sine

then,

tan A = u = 0.35

a = 19.2

Therefore, as α is increased,  the minimum angle at which the box starts to slip is 19.2°.

(b) We know that:

Kinetic friction = mgCos19.2 * 0.25

                        = 2.31m

and,

Net force downwards = mgSin19.2 -  mgCos19.2* 0.25

By substituting the values, we get

                                        = m(3.22-2.31)

                                        = 0.91m/s²

Therefore, As this angle, the acceleration once the box has begun to move at 0.91 m/s².

(c) since the box is sliding at a distance of 4.7 meter:

Thus,

The speed will be:

→ [tex]v^{2} - u^{2} + 2as[/tex]

[tex]0 + 2* 0.91* 5[/tex]

= 9.21

[tex]v = 3m/s[/tex]

Therefore, at this angle, at 3m/s will the box be moving after it has slid a distance 4.7m along the loading ramp

Learn more about acceleration here:

https://brainly.com/question/12550364

#SPJ4

Because according Newton's second law, When a second force of 100N is applied to the object, the net force is

Total F = 100N-100N, it's zero.

Therefore, the two forces cancel each other out and the net force is zero. Acceleration is also zero.

a = 0

Newton's Second Law tells us that an object can experience a change in speed due to a force. Reporting from the NASA Glenn Research Center, Newton's second law defines force equal to the change in momentum (mass times velocity) per change in time.

The change in momentum produces an external force and causes an acceleration on the object. Not only causing an external force, the change in momentum also sometimes results in a change in direction. Remember momentum and acceleration are vector quantities.

Learn more about Newton's second law at

https://brainly.com/question/13447525

#SPJ4

When you increase the driving frequency of a wave on the string, the wavelength will decrease.

When you increase the driving frequency of a wave on a string, the wavelength of the wave will decrease. This is because the speed of the wave on the string is constant, so as the frequency increases, the wave must travel a shorter distance in one period. The wavelength is the distance between two consecutive points on the wave that are in phase (i.e. have the same displacement and velocity), so as the wave must travel a shorter distance in one period, the distance between two consecutive points on the wave that are in phase (i.e. the wavelength) will decrease.

Therefore, the correct answer is: Decrease.

To know more about frequency please refer: https://brainly.com/question/30333783

#SPJ4

The product form from the synthesis reaction between strontium (Sr) and sulfur (S) is SrS. Option C is the correct answer.

Strontium sulfide is the inorganic chemical compound. It has the formula SrS. It is a white solid. The compound is an intermediate in the conversion of strontium sulfate, the main strontium ore called celestite, to other more useful compounds.

Strontium sulfide is used in chemical research and as organic intermediates. It is also used as depilatory. It is also used as Isotope labelled enantiomer of Voriconazole (V760000), an antifungal agent and an ergosterol biosynthesis inhibitor.

Learn more about Strontium sulfide on

https://brainly.com/question/24317624

#SPJ1

The gravitational force between two masses depends on their masses and the distance between them.

To know more about gravitational force , check out :

https://brainly.com/question/72250

#SPJ4

Solar energy is a renewable and clean source of energy that has a wide range of applications and benefits for the environment and society.

Solar energy is the energy generated by the Sun's rays, which can be converted into usable energy using various technologies. The Sun is the source of solar energy, as it emits enormous amounts of energy through nuclear fusion reactions that take place in its core.

The process of generating usable energy from solar energy involves several steps:

   Collecting solar energy: Solar panels or solar cells are used to collect solar energy. These devices are designed to capture the Sun's rays and convert them into direct current (DC) electricity.

   Converting DC to AC: Since most electrical devices run on alternating current (AC), the DC electricity generated by the solar panels must be converted into AC. This is done using an inverter.

   Distributing energy: The AC electricity produced by the solar panels is distributed to power electrical devices or is fed into the electrical grid.

There are several uses of solar energy. It can be used for:

   Generating electricity: Solar power plants can be built to generate electricity on a large scale.

   Heating water: Solar water heaters can be used to heat water for homes or businesses.

   Heating buildings: Passive solar heating can be used to design buildings that are heated by the Sun's energy.

   Cooking: Solar cookers can be used to cook food using the Sun's energy.

   Providing light: Solar-powered lights can be used to provide lighting in areas where electricity is not available.

For such more questions on Solar Energy

https://brainly.com/question/17711999

#SPJ4

Answer:

CONNECTORS THAT BE ELECTRICAL AND CONNECT

Explanation:

IF YOU KNOW YOU KNOW HOW IT BE AND HOW IT IS AND WHY IT BE AND WHY IT IS

The Richter scale measures the magnitude of an earthquake, which is a measure of the energy released by the seismic waves generated by the earthquake.

Measures are the steps taken to achieve a desired outcome. They can be in the form of legislation, policies, regulations, practices, procedures, and processes. They are used to implement and enforce objectives, goals, and strategies, and can be both proactive and reactive. Measures can be utilized by governments, businesses, and individuals to ensure desired outcomes are achieved in a timely and cost-effective manner. Measures can also be used to monitor progress and evaluate the effectiveness of policies and procedures.

To learn more about measures

https://brainly.com/question/28827992

#SPJ4

When the elevator is descending at a constant speed, there are two forces at work on it. Both the weight of the elevator and the cable's tension are forces.

A cable-hung elevator will experience zero change in velocity if it is descending at a steady speed. The net acceleration is therefore zero. The tension force (T) applied by the cable to the elevator is pulling it upward.

The mechanical labour that moves the elevator up and down uses potential in the case of the elevator sinking. Note: The entire mechanical energy comprises a system in consideration is the sum of kinetic energy and potential energy.

To know more about constant velocity visit:

https://brainly.com/question/2088385

#SPJ4

The magnitude of the potential difference v is 0.0006803 V.

To find the magnitude of the potential difference v, we can use the equation for kinetic energy and electric potential energy:

[tex]KE = (1/2)mv^2 = qV[/tex]

Where KE is the kinetic energy, m is the mass of the bead, v is the velocity of the bead, q is the charge of the bead, and V is the potential difference.

Rearranging the equation to solve for V, we get:

[tex]V = (1/2)mv^2/q[/tex]

Plugging in the given values:

[tex]V = (1/2)(3.71 g)(1.62 m/s)^2/(14.5 C)[/tex]
[tex]V = (1/2)(0.00371 kg)(2.62 m^2/s^2)/(14.5 C)[/tex]
[tex]V = 0.0006803 J/C[/tex]
[tex]V = 0.0006803 V[/tex]

Learn more about the magnitude of the potential:

https://brainly.com/question/25895069

#SPJ11

Sometimes true.

For example, if a skateboarder is going down a ramp, the motion will be in the same direction as the net force. Conversely, when a skateboarder climbs a ramp, the direction of motion is opposite to the direction of net force. In general, there is no reason why the direction of motion should be in the same direction as the net force.

The net force is defined as the sum of all the forces acting on an object.

Example,When you kick the ball, the ball takes off and moves through the air. At that time, there is a net force acting on the ball. When the ball begins to return to the ground and finally comes to rest, there is a net force acting on the ball as well.

Newton's Second Law says that "when a net force acts on an object, then the object must accelerate, that is, its velocity changes from second to second." By kicking the soccer ball for the first time, he speeds up, and when the soccer ball starts to slow down to a stop, he speeds up too.

Learn more about net force at

https://brainly.com/question/29261584

#SPJ4

The dots are furthest apart along the path when the speed of the skater is the greatest.

To know more about speed visit:

https://brainly.com/question/20435886

#SPJ1

To find the length of an array in PHP, you can use the count() function.

The count() function returns the number of elements in an array.

Here's an example:

$myArray = array("apple", "banana", "orange", "grape");

$length = count($myArray);

echo "The length of the array is " . $length;

In this example, we first define an array called $myArray with four elements. Then we use the count() function to find the length of the array and assign the result to a variable called $length. Finally, we use the echo statement to display the length of the array.

The output of this code will be:

The length of the array is 4

Note that the count() function can also be used to find the number of elements in an object or a variable with a countable value.

To learn more about Length :

https://brainly.com/question/30635319

#SPJ4

You can calculate thermal conductivity by relating heat flux with it and using the formula:  q = -λΔT/Δx.

Heat flux is the amount of heat energy transferred over an area per second, while thermal conductivity is the ability of a given material to conduct or transfer heat through it. Once the heat flux is known, you can easily calculate the thermal conductivity of a material. The two can be related as:

q = -λΔT/Δx, where:

q is the heat flux, λ is the thermal conductivity, ΔT is the temperature difference across the material, and Δx is the distance travelled by heat.

Thermal conductivity of an object can also be illustrated as:

λ = (QL)/(AΔT), where:

λ is the thermal conductivity, A is the area of the surface, Q is the amount of heat transferred, L is the distance between two isothermal planes, and ΔT is the change in temperature.

To know more about thermal conductivity, refer:

https://brainly.com/question/16229844

#SPJ4

The connection between the change in potential energy of the particle and the change in electric potential is defined as "the change in electric potential is the change in potential energy divided by the charge". So, the correct answer is D.

The electric potential at a point in an electric field is defined as the electric potential energy per unit charge at that point. Therefore, the change in electric potential between two points is equal to the change in electric potential energy divided by the charge of the particle that is moving between those points.

As the charged particle moves from one point to another, its potential energy changes due to the work done by the electric field on the particle. The change in potential energy of the particle is equal to the work done by the electric field on the particle. Therefore, the change in potential energy divided by the charge of the particle is equal to the change in electric potential.

In summary, the change in electric potential between two points is equal to the change in potential energy divided by the charge of the particle that is moving between those points. Therefore, the correct answer is D - "The change in electric potential is the change in potential energy divided by the charge".

You can learn more about potential energy at

https://brainly.com/question/14427111

#SPJ4

Answer:  [tex]W=\frac{1}{2}m[(\frac{v_ir_i}{r_i-y})^2-v_i^2)]\approx.089 J[/tex]

Givens:

m = 0.12 kg

vi = 0.8 m/s

ri = 0.4 m

y = 0.18m

Explanation:[tex]\\[/tex]

Note that the final radius subtracted by the distance pulled

Since angular momentum is conserved

[tex]L_i=L_f[/tex]

[tex]mv_ir_i=mv_fr_f[/tex]

[tex]mv_ir_i=mv_f(r_i-y)[/tex]

[tex]v_f = \frac{mv_ir_i}{m(r_i-y)}[/tex]

[tex]v_f = \frac{v_ir_i}{r_i-y}[/tex]

Work is the change in Kinetic Energy

[tex]W=KE_f-KE_i[/tex]

[tex]W=\frac{1}{2}mv_f^2-\frac{1}{2}mv_i^2[/tex]

[tex]W=\frac{1}{2}m(v_f^2-v_i^2)[/tex]

[tex]W=\frac{1}{2}m[(\frac{v_ir_i}{r_i-y})^2-v_i^2)]\approx.089 J[/tex]

GOOD LUCK ON THE WEBASSIGN

The work done on the disk is approximately -0.018 J. The negative sign indicates that work is done on the disk, reducing its mechanical energy.

Given:

Mass of the disk (m) = 0.120 kg

The initial speed of the disk (vi) = 80.0 cm/s = 0.8 m/s

Initial radius of the disk's circular path (ri) = 40.0 cm = 0.4 m

The distance the string is pulled downward (d) = 18.0 cm = 0.18 m

Calculate the initial mechanical energy (Ei) of the disk:

Ei = KE + PE

Ei = (1/2) × m × vi² + m × g × ri

= (1/2) × 0.120 × (0.8)² + 0.120 × 9.8 × 0.4 = 0.08544 J

Ef = KE + PE

Ef = (1/2) × m × vf² + m × g × rf

= (1/2) × 0.120 × (0)² + 0.120 × 9.8 × (0.4 + 0.18) = 0.06744 J

W = Ef - Ei

= 0.06744 J - 0.08544 J

= -0.018 J

Therefore, the work done on the disk is approximately -0.018 J. The negative sign indicates that work is done on the disk, reducing its mechanical energy.

To know more about the work done:

https://brainly.com/question/32263955

#SPJ6

In comparison to floating, the block experiences a stronger buoyant force when it is entirely submerged.

The correct option is C.

The buoyant force, which exerts upward pressure on completely or partially submerged objects, operates both ways. Its thrust upward is also known as an upthrust. The buoyant force on a body that is partially or entirely submerged in a fluid creates the impression that it is losing weight or becoming lighter.

A body submerged in a liquid, whether partially or entirely, will experience buoyant force, which is equal to the weight of the liquid the body displaces and acts upward at the centre of the fluid's mass.

Learn more about Buoyant force:

brainly.com/question/11884584

#SPJ4

Answer:

1. The image in the plane mirror appears to be identical to the candle, but reversed from left to right.

2. The size of the image in the plane mirror will be the same as the size of the object (candle).

3. Reflection is the bouncing back of light rays when they encounter a surface, such as a mirror or any other shiny object.

4. The distance between the candle and its image in the plane mirror will remain the same, which is 3 meters.

Storage that is wiped clean when power is cut off from a device is known as Volatile memory. The correct answer A.

Volatile memory is a type of data storage that is wiped clean when power is cut off from a device. This type of memory is used in computers, servers, and other electronic devices to store data that needs to be accessed quickly or that needs to be retrieved quickly when power is cut off or the device is rebooted.

The main advantage of volatile memory is that it is faster than permanent storage, as it does not require any time to be written or read.

Learn more about Volatile memory:

https://brainly.com/question/29216283

#SPJ4

The thermal boundary layer is typically thicker than the velocity boundary layer due to the difference in the diffusion rates of heat and momentum.

The thermal boundary layer is the region of fluid near a solid surface where the temperature of the fluid differs from the temperature of the solid surface.

The velocity boundary layer, on the other hand, is the region of fluid near a solid surface where the velocity of the fluid differs from the velocity of the solid surface.

The diffusion rate of heat is typically lower than the diffusion rate of momentum, meaning that heat takes longer to spread through a fluid than momentum does. As a result, the thermal boundary layer is typically thicker than the velocity boundary layer.

This difference in thickness is important in many engineering applications, such as the design of heat exchangers and the prediction of heat transfer rates. It is also important in the study of fluid dynamics, as the thickness of the thermal and velocity boundary layers can affect the behavior of the fluid flow.

To know more about boundary layer here:

https://brainly.com/question/28965743#

#SPJ11

1.61 Blokz high index lenses are a specific type of high index lens that is designed to block out harmful blue light from digital screens.

High index lenses are a type of prescription eyeglass lens that is made of a special type of plastic that is thinner and lighter than traditional plastic lenses. The term "high index" refers to the refractive index of the lens material, which is a measure of how efficiently it bends light. The higher the index, the thinner and lighter the lens can be.

1.61 Blokz, lenses have a refractive index of 1.61, which means they are thinner and lighter than traditional plastic lenses, and they also have a special coating that helps to filter out blue light. This can help to reduce eye strain and discomfort when using digital devices for extended periods of time.

To know more about high index lens here:

https://brainly.com/question/14126835#

#SPJ11

Be sure to convert each number to scientific notation first, before performing any operations ;50,000 min.

Notation is a set of symbols or a system of symbols used to represent or communicate something. It is often used in mathematics and other sciences to represent formulas, equations, and concepts. Notation can also be used in music, literature, and other forms of communication. For example, musical notation is used to communicate the composition and performance of music, while literary notation is used to communicate the structure of a piece of writing. Notation can also be used to represent data or instructions in computer programming.

Distance to Moon = 3.84 x 10^8 ft

Speed = 1.54 x 10^6 ft/min

Time = (3.84 x 10^8 ft) / (1.54 x 10^6 ft/min) = 25,000 min

Time for round trip = 2 x 25,000 min = 50,000 min

To learn more about notation

https://brainly.com/question/30433229

#SPJ4

Be sure to convert each number to scientific notation first, before performing any operations ;50,000 min.

A system of symbols is known as notation, and it is used to represent or communicate ideas. It is frequently used to express formulas, equations, and concepts in mathematics and other fields. Music, literature, and other kinds of communication can all use notation. For instance, literary notation is used to convey a piece of writing's structure, whereas musical notation is used to convey the composition and performance of music. In computer programming, notation can also be used to represent data or instructions.

Distance to Moon = [tex]3.84 \times 10^8 ft[/tex]

Speed = [tex]1.54 \times 10^6 ft/min[/tex]

Time = [tex]\frac{(3.84 \times 10^8 ft)}{ (1.54 \times 10^6 ft/min) } = 25,000 min[/tex]

Time for round trip = 2 x 25,000 min = 50,000 min

To learn more about notation

brainly.com/question/30433229

#SPJ4