A. A
B. C
C. D
D. B
HELLLP GUYS!!!

When fundamental units are combined, they result in derived units. RC (which means Resistance Capacitance) is a derived unit and its unit in the simplest form is Coulomb per Ampere (C/A)

Given that:

Capacitance (C) [tex]\to[/tex] Farads (f)

and

[tex]1f = 1\frac CV[/tex] ----- 1 farad = 1 capacitance per volt

Resistance (R) [tex]\to[/tex] Ohms [tex]\Omega[/tex]

[tex]1 \Omega = 1\frac{V}{A}[/tex]

The unit of RC is the product of the unit of R by the unit of C.

i.e.

[tex]RC = 1f \times 1\Omega[/tex]

Substitute [tex]1f = 1\frac CV[/tex]

[tex]RC = 1\frac CV \times 1\Omega[/tex]

Substitute [tex]1 \Omega = 1\frac{V}{A}[/tex]

[tex]RC = 1\frac CV \times 1\frac VA[/tex]

Cancel out volts (V)

[tex]RC = 1\frac CA[/tex]

[tex]\frac CA[/tex] means Coulomb per Ampere

Hence, the unit of RC is Coulomb per Ampere.

Read more about units at:

https://brainly.com/question/10167613

Answer:

Its all about figuring out what numbers you times by

Explanation:

soooooooooo just x the numbers until you get it right, and i'm guessing your in a school soooo ask your teacher aswell :)

Every living things gives off thermal energy in the form electromagnetic waves. The electromagnetic wave releasing off is  infrared radiation. Hence, option C is correct.  .

Electromagnetic waves are associated with a combined electric field and magnetic field. They can pass through vacuum as well as through a medium. Unlike mechanical waves, all the electromagnetic waves are transverse waves.

The oscillation of particles is in the direction perpendicular to the wave propagation. There are 7 types of  radiations in the electromagnetic spectrum. The light we see is called visible light.

The infrared waves are located in between microwaves and visible light. Every  living thing gives off thermal energy in the form of infrared radiation. Hence, option C is correct.

Find more on infrared waves:

https://brainly.com/question/30309627

#SPJ2

Answer:

Deflating the tires by pulling the valve stems

Explanation:

When an accident happens, the EMT process is to take off the top of the vehicle of the highly damaged vehicle so that it can easily be assessed to rescue the vehicle occupants. This creates a bigger exit for the rescuers to take out the people. Vehicle extrication means removing the vehicle from around someone involved in a fatal collision, when other other ways of exiting is not advised or possible. to stabilize the vehicle you have to deflate all tires by pulling the valve stems.

Answer:

Please find the complete question in the attached file.

Explanation:

The time is taken by ball A to reach the bottom [tex]\to t=\sqrt{\frac{2s}{a}}=\sqrt{\frac{2 \times 10}{5}}=\sqrt{\frac{2 0}{5}}= \sqrt{4}=2\ s[/tex]

Calculating the velocity of the ball:

[tex]-h=ut-\frac{1}{2}gt^2\\\\-S \sin 30=ut-\frac{1}{2}gt^2\\\\-5=u(2)-\frac{1}{2}\times 9.81 \times 2^2\\\\[/tex]

[tex]-5=2u-9.81 \times 2\\\\-5=2u-19.62\\\\-5+19.62=2u\\\\14.62=2u\\\\u=\frac{14.62}{2}\\\\u=7.31 \ \frac{m}{s}[/tex]

Answer:

The experimental scientist

Answer:

I = sum m *r^2    where m represents the (small) individual masses and r is the distance of that mass from center of rotation

Note:  sum m = M

For the hoop given all masses are at a distance RRR from the center of rotation

I = MMM * RRR^2

Answer:

Air.

Explanation:

To know which option is correct, let us consider the relationship between velocity and the wavelength of a wave. This is illustrated below:

Velocity, wavelength and frequency are related by the following equation:

Velocity = wavelength × frequency

v = λf

From the equation above, we can see clearly that the velocity is directly proportional to the wavelength.

This means that an increase in the wavelength will lead to an increase in the velocity and also, a decrease in the wavelength will lead to a decrease in the velocity.

Now, considering the table given in the question above, we can see that the wave has a higher speed in air. This simply means that the wave will also have a higher wavelength in air.

Thus, the correct answer to the question is: air

Answer:

C) Potential energy due to intermolecular forces.

Answer:

Our weight on moon is less than it would be on Earth.

Explanation:

Due to a difference of the strength of gravity on the moon. The moon's gravitation force is determined by the mass and the size of the moon. Since the moon has significantly less mass than the Earth, it will not pull objects toward itself at the strength that Earth will. This means that if you went to the moon you would weigh less, even though your mass stays the same.

Answer:

Explanation:

You need something that relates distance to what the gravitational pull is. You can set up a complex sort of proportion. What you need is a number that is comparable to 9.81 or you can just use the Gravitational Force formula with a 4 tier fraction.

Givens

x = the additional distance toward outer space above the radius of the earth.

G is the gravitational constant.

m1 = the person's mass (which does not change no matter where you are).

m2 = the earth's mass

F1 = 588 N

F2 = 300 N

Formula

[tex]\frac{F1}{F2} = \frac{588 N}{300N}=\frac{\frac{Gm1*m2/}{6400^2} }{\frac{G*m1*m2}{(6400 + x)^2} }[/tex]

Solution

G*m1*m2 all cancel. So what you get looks like this.

[tex]\frac{588}{300} = \frac{(6400 + x)^2}{6400^2}[/tex]

Cross Multiply

588 * 6400^2 = 300*(6400+x)^2  Now all you need do is solve for x.

x will be in km.

588*40960000 = 300 * (40960000 + 12800x + x^2)

1.2288*10^10 + 3840000x + 300x^2  = 2.408448*10^10

300x^2 + 3840000x + 1.2288*10^10 = 2.408448 * 10^10  

Subtract 2.409448 * 10^10 from both sides.

300x^2 + 3840000x - 1,179648 * 10^10

Now use the quadratic formula

I'm guessing I should have converted this to meters because I'm getting ridiculous numbers. They are already large enough as you can see. The method is correct, even if the numbers are not.  

Answer:

The time of motion is 333.3 s

The angular acceleration is -0.0045 rad/s²

Explanation:

Given;

angular distance of the flywheel, θ = 40 rev

initial angular speed, [tex]\omega_i[/tex] = 1.5 rad/s

When the wheel comes to rest, the final angular speed, [tex]\omega_f[/tex] = 0

The angular acceleration is calculated as follows;

[tex]\omega_f^2 = \omega_i^2 + 2\alpha \theta \\\\0 = (1.5 \ rad/s)^2 + 2\alpha (40 \ rev\times \frac{2\pi \ rad}{1 \ rev} )\\\\0 = 2.25 + 160\pi \alpha\\\\160\pi \alpha = - 2.25\\\\\alpha = -\frac{2.25 }{160\pi} \\\\\alpha = -0.0045 \ rad/s^2[/tex]

The time of motion is calculated as;

[tex]\omega_f = \omega _i + \alpha t\\\\0 = 1.5 + (-0.0045t)\\\\0 = 1.5 - 0.0045t\\\\0.0045t = 1.5\\\\t = \frac{1.5}{0.0045} = 333.3 \ s[/tex]

Answer:

Negative ion

.................

Answer:

the change in the internal energy of the balloon is 3,300 J

Explanation:

Given;

heat gained by the balloon system, Q = 6,400 J

work done on the surrounding air by the balloon, W = 3,100 J

The change in the internal energy of the system is calculated from the first law of thermodynamics;

ΔU = Q - W

where;

ΔU is the change in the internal energy of the balloon;

ΔU = 6,400 J - 3,100 J

ΔU = 3,300 J

Therefore, the change in the internal energy of the balloon is 3,300 J

Kettles heated on stoves are used to be made up of copper. This is because copper is a good conductor of heat and electricity.

Copper is used in making kettles. This is because copper is an excellent choice for a tea kettle as it is an excellent conductor of heat and electricity. This means that copper heats up quickly and evenly, making it ideal for the purpose of boiling water and preparing tea. Copper is also a durable material which can last for many years with proper care.

Copper kettles are polished from the outer surface as it is subject to corrosion that is caused by salts and sulfates. If the kettles are not cleaned completely, this corrosion, even as a slight film, will affect the taste of what is prepared in that copper kettle, giving a metallic sensation to taste.

Learn more about Copper here:

https://brainly.com/question/13677872

#SPJ2

Answer:

As a liquid is cooled its molecules lose kinetic energy and their motion slows. When they've slowed to where intermolecular attractive forces exceed the collisional forces from random motion, then a phase transition from liquid to solid state takes place and the material freezes.

Answer:

More than two million electron volts.

Explanation:

More than two million electron volts energy are needed to break or split a deuteron into a proton and a neutron. Nuclear binding energy is the type of energy that is required to split an atom's nucleus into protons and neutrons. The deuteron is an isotope of hydrogen that is composed of a proton and a neutron and it is a stable particle. Very huge amount of energy is needed for the splitting of nucleus due to the presence of heavy particles i.e. proton and neutron.

Answer:

Look at work

Explanation:

Your given the mass of planet M and radius as well as second mass.

Use universal gravitation law to find force of gravity

Fg= Gm1m2/r^2

Plug in givens

Fg= 553.6 N

Use newtons second law

Fg= ma

553.6N=5a

solve for a= 110.72m/s

Weight is 553.6N

Answer:

shushhhgggvvv vgfxgh

Explanation:

gey laahhg

Answer:

ocean wave

hope it helped you

Answer:

Heat required = mass× latent heat Q = 0.15 × 871 ×

The heat required to evaporate 0.15 kg of lead at 1750°C will be 130,650 J.

The movement of energy from a hot to a cold item is characterized as heat. Heat energy flows from a hot material to a cold one.

This occurs because faster-vibrating molecules transmit their energy to slower-vibrating ones.

The given data in the problem is;

m is the mass of lead =  0.15 kg  

T is the temperature = 1750°C,

The latent heat of vaporization for lead is, [tex]\rm L_V[/tex] = 871 × 10³ J/kg.

The heat is found as;

[tex]\rm Q= m \times L_V \\\\ \rm Q= 0.15 \times 871 \times 10^3 \\\\ Q=130,650 \ J[/tex]

Hence the heat required to evaporate 0.15 kg of lead at 1750°C will be 130,650 J.

To learn more about the heat refer to the link;

brainly.com/question/1429452

Answer:

b. 12.5 mAs, 70 kVp

Explanation:

The given parameter are;

The initial exposure factors := 10 mAs and 70 kVp

The initial Grid Ratio, G.R.₁ = 8:1

The Grid Ratio with which the radiographer desires to increase the scatter absorption, G.R.₂  = 12:1

Given that the lead content in the 12:1 grid, is higher than the lead content in 8:1 grid and that 12:1 grid needs more mAs to compensate, and provides a higher image contrast, the amount of extra mAs is given by the Grid Conversion Factors, GCF, as follows;

The GCF for G.R. 8:1 = 4

The GCF for G.R. 12:1 = 5

Therefore, given that the mAs used by the radiographer for 8:1 Grid Ratio is 10 mAs, the mAs required for a G.R. of 12:1 in order to maintain the same exposure is given as follows;

mAs for G.R. of 12:1 = 10 mAs × 5/4 = 12.5 mAs

Therefore the new exposure factors are;

12.5 mAs, 70 kVp

hope it is helpful to you

Answer: The uses of static electricity include:

--> photocopying machines

--> precipitators

The dangers of static electricity include:

--> sparks that can lead to explosion

--> Damage to electronic equipment

Explanation:

STATIC electricity is defined as the imbalance that exists between a positive and a negative charge either within or outside an object. This is because all physical objects are made up of atoms which contains protons, electrons and neutrons. The protons are positively charged, the electrons are negatively charged, and the neutrons are neutral. This shows that physical objects are made up of charges.

Opposite charges attract each other (negative to positive). Like charges repel each other (positive to positive or negative to negative). Most of the time positive and negative charges are BALANCED in an object, which makes that object neutral.

Applications( uses) of static electricity include:

--> photocopying machines: Inkjet photocopiers and printers use static electricity to guide a minute jet of ink to the page’s precise position.

--> precipitators: the static electricity is applied in an electrostatic precipitator whereby they remove smoke from waste gases before they pass out of the chimneys in power stations that burn fossil fuels.

The disadvantages (dangers) of static electricity include:

--> Sparks that can lead to explosion: sparks generated from static electricity can cause fires or explosions due to the ignition of flammable or explosive mixtures.

--> Damage to electronic equipment: this is due to components from electrostatic discharge.

Answer:

2.9

Explanation:

es 2 minutos con 9 segundos seria algo así (1450)÷(500)

Answer:

01.

Explanation:

Half the acceleration. Its heavier and moves slower. If it moved the same acceleration, the forces would also have to be doubled since the mass was.

Answer:

[tex]t = \frac{\pi}{8}, \frac{\pi}{4}, \frac{3\pi}{8}, \frac{3 \pi}{4}[/tex]

Explanation:

The equation of force is

F = 4 sin 4 t

Compare with the standard equation

f = A sin wt

where, w is the angular frequency and A is the amplitude.

Now

w = 4 rad/s

Let the time period is T.

the relation for the time period is

[tex]T = \frac{2\pi}{w}\\\\T = \frac{2 \pi}{4}\\\\T = \frac{\pi}{2}[/tex]

the time period is defined as the time taken by the body to complete one oscillation.

So, the velocity is zero at the extreme points where the object is at time, T/4 and its odd T/2, 3T/4, 3T/2, etc.

So, the velocity is zero at time

[tex]t = \frac{\pi}{8}, \frac{\pi}{4}, \frac{3\pi}{8}, \frac{3 \pi}{4}[/tex]

In component form, the displacement vectors become

• 350 m [S]   ==>   (0, -350) m

• 400 m [E 20° N]   ==>   (400 cos(20°), 400 sin(20°)) m

(which I interpret to mean 20° north of east]

• 550 m [N 10° W]   ==>   (550 cos(100°), 550 sin(100°)) m

Then the student's total displacement is the sum of these:

(0 + 400 cos(20°) + 550 cos(100°), -350 + 400 sin(20°) + 550 sin(100°)) m

≈ (280.371, 328.452) m

which leaves the student a distance of about 431.8 m from their starting point in a direction of around arctan(328.452/280.371) ≈ 50° from the horizontal, i.e. approximately 431.8 m [E 50° N].