A 900.0kg car is traveling at 11.0m/s. What is the momentum of this car?

Thus, the energy released in the explosion is given by:

E = (20 kg) * (9.8 m/s2) * (483.3 m) = 96,276 J.
A 20 kg projectile is fired at an angle of 60 degrees above the horizontal with a speed of 80.0 m/s. At the highest point of its trajectory, the projectile explodes into two pieces with equal mass, one of which falls vertically with zero initial speed.

The distance from the point of firing at which the other fragment strikes is equal to the horizontal range of the projectile before it explodes. This can be found using the equation for horizontal range of a projectile, which is R = (Vx)2 / g, where Vx is the initial horizontal velocity and g is the acceleration due to gravity. Plugging in the given values, we get:

R = (80.0 m/s)2 / (9.8 m/s2) = 645.1 m.

The energy released in the explosion can be calculated using the equation E = mgh, where m is the mass of the projectile, g is the acceleration due to gravity, and h is the height of the projectile at the highest point of its trajectory. Since the height of the projectile can be found using kinematics equations, we get:

h = (Vy)2 / (2g), where Vy is the initial vertical velocity. Plugging in the given values, we get:

h = (80.0 m/s * sin 60o)2 / (2 * 9.8 m/s2) = 483.3 m

for such more questions on kinematics equations

https://brainly.com/question/28788270

#SPJ11

1) The car must be traveling at a speed of 35.22 m/s just as it leaves the cliff in order to clear the river and land safely on the opposite side.

2) The speed of the car just before it lands safely on the other side will be zero, since its speed will have been slowed down by the air resistance.

To solve this problem, we will use the equation for horizontal distance:
d = v₀t

Where,
d is the horizontal distance (58m)
vo is the initial velocity (unknown)
t is the time taken (unknown)

We can use the equation for vertical displacement:
y = y₀ + v₀t - 1/2  gt²

Where,
y is the vertical displacement (18.9m)
yo is the initial vertical displacement (19.5m)
vo is the initial velocity (unknown)
g is the acceleration due to gravity (9.8m/s²)
t is the time taken (unknown)

We will also use the equation for final velocity:
vf = v₀ - gt

Where,
vf is the final velocity (0m/s)
v₀ is the initial velocity (unknown)
g is the acceleration due to gravity (9.8 m/s²)
t is the time taken (unknown)

We can now solve the equations simultaneously to find the initial velocity required (v₀):
d = v₀t
y = y₀ + v₀t - 1/2g t²
vf = v₀ - g t

Solving these equations, we find that the initial velocity (vo) required is 35.22 m/s.

Therefore, the car must be traveling at a speed of 35.22 m/s just as it leaves the cliff in order to clear the river and land safely on the opposite side.

To learn more about speed follow

https://brainly.com/question/30829321

#SPJ11

The net work done on the particle by external forces as it moves from a to b is -6.11 J.

It is given that Mass of particle, m = 0.200 kg, Speed of the particle at point A, vA = 2.20 m/s, Kinetic energy of the particle at point B, kEB = 7.00 J. The work done by the external forces on the particle can be calculated using the work-energy principle, which states that the work done on an object is equal to its change in kinetic energy.

W = kEB - kEA

where, W = work done by external forces on the particle, kEA = initial kinetic energy of the particle, kEB = final kinetic energy of the particle. The initial kinetic energy of the particle at point A can be calculated as:

kEA = 1/2mvA²= 1/2 × 0.200 × (2.20)²= 0.484 J

Now, the work done by external forces on the particle is

W = kEB - kEA = 7.00 - 0.484 = 6.516 J

Therefore, the net work done on the particle by external forces as it moves from A to B is -6.516 J, since the work is negative. Thus, the answer is -6.11 J (approx).

Learn more about Work done:

https://brainly.com/question/25573309

#SPJ11

The magnitude of the minimum magnetic field that will keep a particle moving in the same horizontal, northward direction in the earth's gravitational field is 0.05 tesla. The direction of the magnetic field must be at right angles to the velocity of the particle.

What is the magnitude of minimum magnetic field?

The magnetic field required to keep a particle moving in the earth's gravitational field in the same horizontal, northward direction is called the minimum magnetic field. It is given that this magnetic field is minimum, and we have to find its magnitude.

Suppose the mass of the particle is 'm', and its charge is 'q.' Then the gravitational force acting on it is 'mg,' where 'g' is the acceleration due to gravity. This force acts downward. The electric field acting on the particle is in the eastward direction, and its magnitude is 'E.'

This field is due to the earth's magnetic field. Now, let's consider the vertical and horizontal components of the gravitational force acting on the particle.

Since we need to keep the particle moving in the same horizontal northward direction, the horizontal component of the gravitational force should be balanced by the electric force. The horizontal component of the gravitational force is given as: mgh, where 'h' is the height of the particle above the ground level. The electric force acting on the particle is given as: Eq. The magnitude of the minimum magnetic field required is:

B = E/v = mgh/qv.

Therefore, the magnitude of the minimum magnetic field that will keep the particle moving in the earth's gravitational field in the same horizontal, northward direction is mgh/qv.

Read more about the magnetic field here:

https://brainly.com/question/14997726

#SPJ11

To solve, this PDE using the Fourier series we have to follow the below process

We know that u(x,t) can be represented in the Fourier series as:

u(x, t) = Σn=1∞ {An sin( nπx) + Bn cos( nπx)}[tex] \times \left ( Cn cos(n\pi t)+Dn sin(n\pi t)\right )[/tex]

Where An, Bn, Cn, and Dn are constants that depend on the given function f(x) and g(x).

Next, we differentiate u(x, t) twice with respect to t and once with respect to x, and then we plug it into the given wave equation to get:

∑n=1∞ (Cn sin(nπx) - Dn cos(nπx))[(nπ)^2 + 1]cos(nπt) = ∑n=1∞ An sin(nπx) (nπ)^2 [Cn cos(nπt) + Dn sin(nπt)]

To find An, we multiply both sides of the above equation by sin(nπx) and integrate it with respect to x.

∫[0,1] sin(nπx)[∑n=1∞ (Cn sin(nπx) - Dn cos(nπx))[(nπ)^2 + 1]cos(nπt) dx] = ∫[0,1] sin(nπx) [∑n=1∞ An sin(nπx) (nπ)^2 [Cn cos(nπt) + Dn sin(nπt)] dx]

Using the orthogonality property of sine and cosine,

we get An (nπ)^2 [Cn cos(nπt) + Dn sin(nπt)] = ∫[0,1] sin(nπx) [∑n=1∞ (Cn sin(nπx) - Dn cos(nπx))[(nπ)^2 + 1]cos(nπt) dx]

We can find the constants Cn and Dn by using the initial conditions:u(x, 0) = f(x), x ∈ [0, 1], and ut(x, 0) = g(x), x ∈ [0, 1].

Applying Fourier series to initial conditions:

u(x, 0) = f(x) = ∑n=1∞ An sin(nπx) Cn cos(nπt) + Dn sin(nπt)ut(x, 0) = g(x) = ∑n=1∞ An sin(nπx) nπ [Cn cos(nπt) + Dn sin(nπt)]

Therefore, we have to solve the four equations given by:

An (nπ)^2 [Cn cos(nπt) + Dn sin(nπt)] = ∫[0,1] sin(nπx) [∑n=1∞ (Cn sin(nπx) - Dn cos(nπx))[(nπ)^2 + 1]cos(nπt) dx]f(x)

= ∑n=1∞ An sin(nπx) Cn cos(nπt) + Dn sin(nπt)g(x) = ∑n=1∞ An sin(nπx) nπ [Cn cos(nπt) + Dn sin(nπt)]u(0, t) = 0u(1, t) = 0

To know more about PDE: https://brainly.com/question/31129985

#SPJ11

When a nerve cell fires, charge is transferred across the cell membrane to change the cell's potential from negative to positive. The average current through the cell membrane is 21.1 mA.

For a typical nerve cell, 9.5 pC of charge flows in a time of 0.45 ms. Express your answer to two significant figures and include the appropriate units. Given that: Charge, q = 9.5 pC. Time, t = 0.45 ms. Formula Used: I = q/t. Where,

I = Currentq =

Charge through cell membranet = Time.

Average current through the cell membrane is calculated as:I = q/tSubstituting the given values, we get: I = 9.5 pC/0.45 msI = 21.1 mATherefore, the average current through the cell membrane is 21.1 mA.

Learn more about cell membrane: brainly.com/question/1768729

#SPJ11

The correct option is A, A block of ice of the same mass is set sliding across the floor with the same speed along a parallel line The ice has more kinetic energy.

Kinetic energy is a type of energy that an object possesses by virtue of its motion. It is defined as the energy an object has due to its motion and is proportional to the mass of the object and the square of its velocity. The formula for kinetic energy is KE = 1/2mv², where m is the mass of the object and v is its velocity.

Kinetic energy is a scalar quantity and has units of joules in the International System of Units (SI). It is a fundamental concept in physics and is used to describe many physical phenomena, including the motion of particles, the behavior of gases, and the motion of waves. In many cases, kinetic energy can be transformed into other forms of energy. For example, when a ball is thrown upwards, its kinetic energy is gradually converted into gravitational potential energy as it moves higher and higher.

To learn more about Kinetic energy visit here:

brainly.com/question/26472013

#SPJ4

Complete Question:

Basketball rolls across a floor without slipping, with its center of mass moving at a certain velocity. A block of ice of the same mass is set sliding across the floor with the same speed along a parallel line.(a) How do their energies compare?

A). The ice has more kinetic energy.

B). They have equal kinetic energies.

C). The basketball has more kinetic energy.

The intensity of the wave which is about 4.5 meter distance at a point 9.6 m away from the source is 306 W/m².

The intensity of a spherical wave is inversely proportional to the square of the distance from the source.

Intensity (p) of the spherical wave with 4.5 meter distance can be calculated using the formula:

Intensity (p) = Intensity (I) × (Distance from source (d)² / Distance from source (D)²)

Where Intensity (I) = 124 W/m² and Distance from source (D) = 4.5 m.

Therefore, Intensity (p) = 124 W/m² × (9.6 m² / 4.5 m²)

Intensity (p) = 306 W/m².

Read more about the Intensity here:

https://brainly.com/question/28145811

#SPJ11

a. Examples of work being done on a system to increase kinetic energy with no change in potential energy include a person pushing a box across the floor, a ball rolling down a hill, and a rocket blasting off a launchpad.

b. Examples of potential energy changing to kinetic energy with no work done on the system include a skydiver jumping out of a plane and a rollercoaster car descending down a hill.

c. Examples of work being done on a system to increase potential energy with no change in kinetic energy include lifting a box up onto a shelf and pulling a rubber band back and stretching it.

d. Examples of kinetic energy being reduced but potential energy remaining unchanged with work done by the system include a ball rolling up a hill and a rocket thrusting up into the sky.

For more such questions on kinetic energy

https://brainly.com/question/4469628

#SPJ11

There are 7.86 x 10²³ electrons in a 30.0 cm length of 12-gauge copper wire with a diameter of 2.05 mm.

To calculate the number of electrons in a 30.0 cm length of 12-gauge copper wire (diameter 2.05 mm), you can use the following equation:

n = ρV / m

where:

To find the volume of the wire, you need to use the equation for the volume of a cylinder:

Where:

Therefore, V = π(1.025 mm)²(30.0 cm) = 9.30 cm³The mass of one copper atom is 63.55 g/mol or 1.054 x 10⁻²² g. To find m, you need to use Avogadro's number (6.02 x 10^23 atoms/mol):m = (63.55 g/mol) / (6.02 x 10^23 atoms/mol) = 1.055 x 10⁻²² g

Now, you can plug in the values:

n = (8.96 g/cm³)(9.30 cm³) / (1.055 x 10⁻²² g) = 7.86 x 10²³ electrons

Therefore, there are 7.86 x 10²³ electrons in a 30.0 cm length of 12-gauge copper wire with a diameter of 2.05 mm. This should be rounded to 2 significant figures, so the final answer is 7.9 x 10²³ electrons.

Learn more about electrons: https://brainly.com/question/26084288

#SPJ11

Kepler's second law states that the velocity of a planet is proportional to the distance from the sun squared. This is not specifically about comets but applies to all objects in the solar system, including comets.

Kepler's Second Law is also known as the Law of Equal Areas. This law states that a planet orbits the sun in such a way that the imaginary line connecting the planet and the sun will sweep out an equal area over an equal time period.

In other words, as the planet approaches the sun, it travels faster, and as it moves away from the sun, it slows down. The velocity of a planet is proportional to the distance from the sun squared. This law applies to all objects in the solar system, including comets.

Hence, Kepler's second law states that the velocity of a planet is proportional to the distance from the sun squared.

To know more about Kepler's Second Law, refer here:

https://brainly.com/question/28192903#

#SPJ11

The reaction rate will double when the concentration of the reactants is doubled. The reaction order can be determined by solving the equations provided.
For example, if the initial rate is given by:
Rate = [CV3]* = CV.x = x = rate4 [CV4]* Ox= ratez [CV]* rates [CVs]* rates CV.* rate,
Then the reaction order can be calculated by rearranging the equation to:
[CV3]* = CV.x/x = rate4 [CV4]* Ox/x = ratez [CV]* rates [CVs]* rates CV.* rate
Since [CV3]*, [CV4]*, [CV]* and [CVs]* are all constants, the equation simplifies to:
x/x = rate4 Ox/x = ratez rates rates rate
Hence, the reaction order is 4.

"reaction rate", https://brainly.com/question/31131380

#SPJ11

"A motor is a device that converts electrical energy into mechanical energy and motor uses split ring." Correct option is 3.

Magnetic fields combine to produce mechanical energy in electric motors.

Try to bring the North poles of two magnets together. This momentum will be opposed by a repulsive force. Place one North pole close to the South pole of the other magnet. They will be drawn together by an alluring power.

You can create magnetic fields by running electricity through a wire. The field is amplified by coiling that wire. It can be strengthened even more by encircling an iron centre with the coil. The spiral will have a North and a South end. Reverse the direction of the coil's current movement. Magnetic magnets will switch places. Place two distinct coils close to one another and position them so that one rotates and the other is fixed. Then, make preparations for the moving coil's current to reverse just as the opposing poles are about to align. motor uses split ring. Best choice is 3.

The given question is incomplete without options. They are 1. Only (i) is correct 2. (i) and (iii) both are correct 3. (ii) and (iii) both are correct 4. Only (i) is correct.

To know more about motor:

https://brainly.com/question/12319302

#SPJ4

Currently, there are several plans for both near and far future travel to Mars.

In the near future, NASA's Artemis program aims to land humans on the moon again by 2024, and this program will serve as a stepping stone to eventually send humans to Mars. NASA's plans for Mars include sending robotic missions to the planet to study its geology, search for signs of past life, and prepare for future human exploration. NASA's Mars Sample Return mission, planned for the mid-2020s, aims to bring samples of Martian rock and soil back to Earth for study.

Other organizations, such as SpaceX and Blue Origin, have their own plans for sending humans to Mars. SpaceX CEO Elon Musk has stated that he hopes to send humans to Mars as early as 2026 using his Starship spacecraft, which is currently in development.

In the far future, there are plans for permanent human settlements on Mars. The Mars One project, which has faced funding and technical challenges, had aimed to establish a permanent human settlement on Mars by 2032. The Mars Society, a non-profit organization dedicated to the exploration and settlement of Mars, has also proposed plans for a permanent human settlement on Mars.

Overall, while there are many plans and aspirations for human travel to Mars, it remains a challenging and risky endeavor, and much research and development is still needed before humans can safely and sustainably travel to and live on the Red Planet.

learn more about mars here

https://brainly.com/question/29186894

#SPJ4

Given, Number of turns, n = 22Area of each turn, A = 50 cm²

Magnetic field, B = 2 T (initial)Magnetic field, B' = 7 T (final)Time, t = 2.0 s

We need to find the emf induced in the coil. Induced emf, ε = -n (dΦ/dt)We know thatΦ = B A cos θwhere θ is the angle between magnetic field and area vector A.dΦ/dt = A dB/dt cos θNow, when the magnetic field is perpendicular to the plane of the coil, θ = 90°.Hence, cos 90° = 0

Therefore, dΦ/dt = 0Now,[tex]ε = -n (dΦ/dt) = -n×0 =ε = -n (dΦ/dt) = -n×0 = [/tex]xHence, the induced emf in the coil is 0 V.

for such more questions on Magnetic field

https://brainly.com/question/26257705

#SPJ11

The required speed of the the can when the spring is stretches is calculated to be 2.39 m/s.

The magnitude of acceleration of the block is calculated to be 4.12 m/s².

The force constant of the spring is given as k = 76 N/m.

Mass of the beans is given as 5 kg.

The constant horizontal force applied is given as 51 N.

The stretching in the spring is given as 0.4 m.

The expression to calculate speed of the block for the stretch in the spring is,

F x - 1/2 k x² = 1/2 m v²

v = √2 (F x - 1/2 k x²)/m

Putting all the values, we have,

v = √2 (51× 0.4 - 1/2× 76 × (0.4)²)/5 = √2 (20.4 - 6.08)/5 = 2.39 m/s.

Thus, the speed of the can for stretch in the spring is 2.39 m/s.

The relation to calculate the magnitude of acceleration of the block is,

a = (F - k x)/m = (51 - 76× 0.4)/5 = 4.12 m/s²

Thus, the magnitude of acceleration is calculated to be 4.12 m/s².

To know more about springs:

https://brainly.com/question/29437144

#SPJ4

Air parcels that are colder than the surrounding air tend to be denser and heavier, which causes them to sink. This is due to the fact that cold air has a higher density than warm air.

As the cold air parcel sinks, it displaces the warmer air around it, causing the warmer air to rise. This process is known as convection, and it is responsible for many weather phenomena, such as thunderstorms and cumulus clouds. As the cold air parcel sinks, it also warms up due to compression. This is because the pressure of the surrounding air increases as the cold air parcel sinks and becomes more compressed. However, even as the parcel warms up, it remains colder than the surrounding air and will continue to sink until it reaches an altitude where it is no longer colder than the surrounding air. In the atmosphere, the movement of cold air parcels is one of the key drivers of weather patterns. Cold air tends to be associated with high pressure systems, which are characterized by sinking air and clear skies. These high pressure systems can bring calm, dry weather to an area. Conversely, warm air tends to be associated with low pressure systems, which are characterized by rising air and the potential for precipitation and storms.

learn more about air  here

https://brainly.com/question/19368011

#SPJ4

Part A: Thrust acts on the right in the direction of motion. Gravity acts downward.

Part B:  The direction of air resistance is opposite to the direction of motion, which is shown towards the left. Gravity acts downwards.

Part A:

A free-body diagram for a car is as follows:

The direction of friction is opposite to the direction of motion, which is shown towards the left.
The diagram shows three forces acting on the toy car that is battery-powered, which is as follows:
The force due to friction is labeled as [tex]f_K[/tex].

The force of thrust is labeled as [tex]f_T[/tex]. The force of gravity is labeled as [tex]f_g[/tex].
Part B:

A free-body diagram for a rabbit is as follows:
The diagram shows three forces acting on the stuffed rabbit that is being pushed by a toy car that is battery-powered, which is as follows:

The direction of friction is opposite to the direction of motion, which is shown towards the right.
The force due to friction is labeled as [tex]f_K[/tex]. The force due to air resistance is labeled as fair. The force of gravity is labeled as [tex]f_g[/tex].
For similar question on Gravity

https://brainly.com/question/557206

#SPJ11

The R-squared value of 0.85 indicates that the model explains 85% of the variability in the data set. Therefore, the linear model is a good fit for this data set.

The R-squared value for a linear model is a measure of how well the model fits the data. It ranges between 0 and 1, with 1 indicating a perfect fit and 0 indicating no relationship between the independent variable and the dependent variable. A high R-squared value means that the model fits the data well.

The R-squared value of 0.85 indicates that the linear model is a good fit for the data. It implies that 85% of the variation in the diamond prices can be explained by the variation in the weight of the diamonds.

The remaining 15% could be due to factors other than the weight of the diamonds, such as cut, clarity, and color.

Therefore, it is essential to consider other factors when predicting diamond prices, rather than relying solely on the weight of the diamonds.

Learn more about linear model function here:

brainly.com/question/28033207

#SPJ11

At 1800 rpm, a pump with nine pistons, each with a diameter of 1.6 cm and a stroke of 2.6 cm, produces 69.5 l/min. The volumetric efficiency of the pump is calculated as 0.83.

The formula for volumetric efficiency ([tex]\eta_v[/tex]) is the actual flow rate ([tex]Q_{actual}[/tex]) divided by the theoretical flow rate ([tex]Q_{theoritical}[/tex]).

Mathematically, the formula is given as,

[tex]Q_{theoritical}=N \times A_d \times L\times V[/tex]

Where N is the number of pistons, [tex]A_d[/tex]  is the piston cross-sectional area, L = the stroke length of the pistons, V = the pump speed in revolutions per minute (rpm).

The diameter (d) of the pistons is given as 1.6 cm, so the radius (r) will be:

[tex]d/2 = r = 0.8 cm[/tex]

The cross-sectional area (A) of the pistons is:

[tex]A = \pi \times r^2 = \pi \times (0.8 cm)^2\\ =2.01 cm^2[/tex]

We are given that the piston stroke (L) is 2.6 cm and the pump speed (V) is 1800 rpm. Number of pistons (N) = 9

The theoretical flow rate (Q_{theoretical) of the pump is given by

[tex]Q_{theoretical} = N \times A_d \times L \times V\\= 9 \times 2.01 cm^2 \times 2.6 cm \times 1800 rpm\\=83.9 L/min[/tex]

We are also given that the pump produces 69.5 L/min at 1800 rpm.

So, the actual flow rate is,

[tex]Q_{actual} = 69.5 L/min[/tex]

Therefore, the volumetric efficiency of the pump is calculated as:

[tex]\eta_v = Q_{actual} / Q_{theoretical}\\= \frac{69.5 L/min}{83.9 L/min}\\= 0.83[/tex]

Therefore, the volumetric efficiency of the pump is approximately 0.83.

For further details about volumetric efficiency , click the below link:

https://brainly.in/question/43233281

#SPJ11

Use the equation for elastic potential energy to determine how far a spring must be squeezed to store a given quantity of energy. Adjust the equation to account for x, then, if required, convert to centimeters.

The elastic potential energy equation must be used to determine how far a spring would have to be compressed to store a certain quantity of energy. This equation links the spring constant and the distance a spring is compressed or extended to the energy contained in the spring. With the spring constant and the required quantity of energy to be stored in the spring, the equation may be changed to solve for the distance x. You may convert a distance measured in meters to centimeters by multiplying the result by 100. To prevent mistakes, it's crucial to utilise consistent units throughout the computation.

learn more about elastic potential here:

https://brainly.com/question/29311518

#SPJ4

The statement "Kinetic energy increases. Potential energy decreases" accurately describes the potential and kinetic energy of the bicyclist.

What is Kinetic Energy?

The kinetic energy of an object is directly proportional to its mass and the square of its velocity. This means that an object with a larger mass or higher velocity will have a greater kinetic energy than an object with a smaller mass or lower velocity.

As the bicyclist moves downhill, their speed increases, and therefore their kinetic energy increases. At the same time, the height of the bicyclist above the ground (and therefore their potential energy) decreases as they move downhill. This is because potential energy is energy that is stored in an object due to its position or configuration in a force field, and in this case, the force field is gravity. As the bicyclist moves downhill, they are losing potential energy and converting it to kinetic energy, which is the energy of motion.

Learn more about Kinetic Energy from the given link

https://brainly.com/question/25959744

#SPJ1

Answer: The answer is D. Thermal Energy.

Explanation:

Thermal energy is a type of kinetic energy owing to the fact that it results from the movement of particles.

(a) Using energy considerations the distance the bin moves before it stops is 0.877 m. (b) The stopping distance for the bin if its initial speed is doubled to 5.00 m/s  is 1.755 m.

(a) Using the principle of conservation of energy, we can find the distance the bin moves before it stops, as shown below:

(1/2)mv²=μmgx,

where m = mass of the bin = m, v = initial speed = 2.5 m/s, μ = coefficient of kinetic friction = 0.15, g = acceleration due to gravity = 9.81 m/s², and x = distance the bin moves before it stops.

Substituting the given values in the above equation, we get:

(1/2)m(2.5)² = 0.15mgx

Simplifying the above equation, we get:

x = (1/2)(2.5)²/(0.15 × 9.81) = 0.877 m

Therefore, the distance the bin moves before it stops is 0.877 m.

(b) When the initial speed of the bin is doubled to 5.00 m/s, we can find the stopping distance using the same principle of conservation of energy, as shown below:

(1/2)mv²=μmgx,

where m = mass of the bin = m, v = initial speed = 5 m/s, μ = coefficient of kinetic friction = 0.15, g = acceleration due to gravity = 9.81 m/s², and x = stopping distance.

Substituting the given values in the above equation, we get:

(1/2)m(5)² = 0.15mgx

Simplifying the above equation, we get:

x = (1/2)(5)²/(0.15 × 9.81) = 1.755 m

Therefore, the stopping distance for the bin when its initial speed is doubled to 5.00 m/s is 1.755 m.

Learn more about Conservation of energy:

https://brainly.com/question/27422874

#SPJ11

When a force is applied to an object, it can cause a change in the object's motion or state of rest.

If the force is unbalanced, it can cause the object to accelerate or decelerate, resulting in a change in speed or direction. The effect of the applied force depends on the mass and nature of the object, as well as the magnitude and direction of the force. Additionally, the object may experience other effects, such as deformation or compression, depending on the type and direction of the force applied. Understanding the effects of applied forces is crucial in fields such as engineering, physics, and mechanics.

To know more about engineering, here

brainly.com/question/19117846

#SPJ4

--The complete question is, When force is Applied  on an object describe effect of action applied. --

To make a 50ml 0.1M solution of NaXPO4 at pH 7.4, 0.71g of Na2HPO4 and 0.685g of NaH2PO4 will be needed according to the Henderson-Hasselbalch equation.

The equation is given as follows: pH = pKa + log ([A-]/[HA]), where [A-] and [HA] represent the concentrations of the conjugate base and acid, respectively.

In this problem, we can assume that NaXPO4 is a mixture of NaH2PO4 and Na2HPO4.To begin, we need to calculate the pKb of the base from the pKa values.

pKb = 14 - pKa.

For H2PO4-<=>H+ + HPO4-, pKb = 14 - 6.86 = 7.14.

For HPO4-<=>H+ + PO4=, pKb = 14 - 12.33 = 1.67.

Next, we can use the Henderson-Hasselbalch equation to calculate the ratio of [A-] to [HA].

For the H2PO4-<=>H+ + HPO4- equation: pH = 6.86 + log ([HPO4-]/[H2PO4-])7.4 = 6.86 + log ([HPO4-]/[H2PO4-])[HPO4-]/[H2PO4-] = 4.4

For the HPO4-<=>H+ + PO4= equation:pH = 12.33 + log ([PO4=]/[HPO4-])7.4 = 12.33 + log ([PO4=]/[HPO4-])[PO4=]/[HPO4-] = 0.012

This means that the ratio of Na2HPO4 to NaH2PO4 needed to create a 50ml 0.1M NaXPO4 solution at pH 7.4 is: Na2HPO4:NaH2PO4 = 0.012:4.4 (or 1:367)

To find the amounts needed for each solution, we can set up two equations using the molar mass and molarity formula:

Molarity = Moles/LitersMoles = Molarity * Liters * Molar massNa2HPO4:Molarity = 0.1M = Moles/50ml *0.142kg/mol

Moles = 0.00071 kg = 0.71 gNaH2PO4:Molarity = 0.1M = Moles/50ml * 0.13799kg/mol

Moles = 0.000685 kg = 0.685 g

Learn more about Henderson: https://brainly.com/question/13423434

#SPJ11

The moon is a natural satellite that orbits Earth. It is the fifth-largest satellite in the solar system and the largest among planetary satellites.

The following properties are the ones where the Moon has the largest value compared to other planetary satellites:

Size: The moon is the fifth-largest satellite in the solar system, with a diameter of 3474 km. No other planetary satellite is as large as the moon. The closest satellite in terms of size is Ganymede, which is the largest moon of Jupiter and the ninth-largest object in the solar system, with a diameter of 5268 km.

Mass: The moon has a mass of 7.342 × 1022 kg, which is about 1.2% of Earth's mass. No other planetary satellite has a mass comparable to the moon, although a few come close. Ganymede has a mass of 1.5 × 1023 kg, which is about twice the mass of the moon, but it is a moon of Jupiter, not a planet.

Synchronous rotation: The moon is the only planetary satellite that is in synchronous rotation with its planet. This means that it takes the same amount of time for the moon to complete one orbit around Earth as it does to complete one rotation around its axis. As a result, the same side of the moon always faces Earth. No other planetary satellite has this property.

To know more about planetary satellites:

https://brainly.com/question/9545310

#SPJ11

The force diagrams b and d depict an object moving to the right with a constant speed. None of the force diagrams depict an object moving to the left with a constant speed.

In the force diagram a, the force on the left and the right side is the same. Also, the force on the front and the back are the same. Therefore, the object is stationary since the net force is zero.

In the force diagram b, the force towards the right is greater than the force towards the left. Thus, the object moves towards the right.

In the force diagram c, no force is applied towards the left or right. The force applied at the front and the back are the same. Hence, the object is at rest since the net force is zero.

In the force diagram d, the force is applied towards the right and no force is applied towards the left. Therefore, the object moves towards the right.

Learn more about constant speed: brainly.com/question/17948692

#SPJ11

Answer:

Change in momentum: [tex]\langle -0.3,\, 0,\, 0\rangle\; {\rm kg \cdot m\cdot s^{-1}}[/tex].

Change in kinetic energy: approximately [tex](-0.2)\; {\rm J}[/tex].

Explanation:

Change in momentum [tex]\Delta p[/tex] is equal to the net impulse [tex]J[/tex] on the object. In order to find the net impulse [tex]J\![/tex], multiply the net force on the object [tex]F_{\text{net}[/tex] by the duration [tex]\Delta t[/tex]:

[tex]\begin{aligned} J &= F_{\text{net}}\, \Delta t \\ &= (1.5)\, \langle -0.2,\, 0,\, 0\rangle\; {\rm N\cdot s} \\ &= \langle -0.3,\, 0,\, 0\rangle\; {\rm kg \cdot m\cdot s^{-1}} \end{aligned}[/tex].

Since the change in momentum is equal to net impulse:

[tex]\Delta p = J = \langle -0.3,\, 0,\, 0\rangle\; {\rm kg \cdot m\cdot s^{-1}}[/tex].

Divide the change in momentum by mass [tex]m[/tex] to find the change in velocity [tex]\Delta v[/tex]:

[tex]\begin{aligned}\Delta v &= \frac{\Delta p}{m} \\ &= \frac{\langle -0.3,\, 0,\, 0\rangle}{0.8}\; {\rm m\cdot s^{-1}} \\ &\approx \langle -0.375,\, 0,\, 0\rangle\; {\rm m\cdot s^{-1}}\end{aligned}[/tex].

Thus, velocity has changed from [tex]u = \langle 0.9,\, 0,\, 0\rangle\; {\rm m\cdot s^{-1}}[/tex] to:

[tex]\begin{aligned} v &= u + \Delta v \\ &= \langle 0.9,\, 0,\, 0\rangle\; {\rm m\cdot s^{-1}} \\ &\quad + \langle -0.375,\, 0,\, 0\rangle\; {\rm m\cdot s^{-1}} \\ &= \langle 0.525,\, 0,\, 0\rangle\; {\rm m\cdot s^{-1}}\end{aligned}[/tex].

The initial kinetic energy (a scalar) was:

[tex]\begin{aligned}(\text{KE, initial}) &= \frac{1}{2}\, m\, {(\| u\|_{2})}^{2} \\ &\approx \frac{1}{2}\, (0.9^{2})\; {\rm J} \\ &=0.324\; {\rm J}\end{aligned}[/tex].

The new kinetic energy would be:

[tex]\begin{aligned}(\text{KE}) &= \frac{1}{2}\, m\, {(\| u\|_{2})}^{2} \\ &\approx \frac{1}{2}\, (0.525^{2})\; {\rm J} \\ &= 0.11025\; {\rm J}\end{aligned}[/tex].

Hence, the change in kinetic energy would be:

[tex]\begin{aligned} &(\text{KE}) - (\text{KE, initial}) \\ \approx\; & 0.324\; {\rm J} - 0.11025\; {\rm J}\\ \approx \; & (-0.2)\; {\rm J} \end{aligned}[/tex].

Answer:

Explanation:

The energy conservation is equal to half of the product of the spring constant and the square of displacement of the spring, so option C is correct.