Complete Question
A 75 kg man and a 100. Kg woman are playing tug of war on a frictionless surface. The man accelerates toward the woman at 2.0 m/s2.How much force does she use to pull on the rope
Answer:
The value is [tex]F = 150 \ N[/tex]
Explanation:
From the question we are told that
The mass of the man is [tex]m_m = 75 \ kg[/tex]
The mass of the woman is [tex]m_f = 100 \ kg[/tex]
The acceleration of the man is [tex]a_m = 2.0 \ m/s ^2[/tex]
Generally the force which she used to pull the rope is mathematically represented as
[tex]F = m * a[/tex]
=> [tex]F = 75 * 2[/tex]
=> [tex]F = 150 \ N[/tex]
If a current of 2.5 Ampere flow through a circuit in 15 minutes calculate amount of charge through a crcuit
Answer:
Q = 2250 Coulombs
Explanation:
We are given;
Current: I = 2.5 A
Time: t = 15 minutes = 15 × 60 seconds = 900 s
Now formula for the amount of charge through the circuit is given by:
Q = It
Thus;
Q = 2.5 × 900
Q = 2250 Coulombs
I really need help on this I don’t understand it
1: 15m
2: 56m/s
3: 34.5m
Sorry if these are incorrect.
How long does it take the lava bomb to reach its maximum height? Answer with three significant digits and the correct unit. A small volcano's steam pressure belches vertically upward a lava bomb from an initial height of 64.4 m and with an initial upward velocity of 31.4 m/s. Remember gravity's acceleration near earth is g = 9.8 m/s2 down.
Answer:
The time taken to reach the maximum height is 3.20 seconds
Explanation:
The given parameters are;
The initial height from which the volcano erupts the lava bomb = 64.4 m
The initial upward velocity of the lava bomb = 31.4 m/s
The acceleration due to gravity, g = 9.8 m/s²
The time it takes the lava bomb to reach its maximum height, t, is given by the following kinematic equation as follows;
v = u - g·t
Where;
v = The final velocity = 0 m/s at maximum height
u = The initial velocity = 31.4 m/s
g = The acceleration due to gravity = 9.8 m/s²
t = The time taken to reach the maximum height
Substituting the values gives;
0 = 31.4 - 9.8 × t
∴ 31.4 = 9.8 × t
t = 31.4/9.8 ≈ 3.204
The time taken to reach the maximum height rounded to three significant figures = t ≈ 3.20 seconds
HELP AGAIN PLS
PHYSICS - I SUCK AT THIS
Answer:
You can calculate average velocity by taking the delta(x) which is the change in distance and then dividing it by the time.Hence here the tumbleweed goes from 25.6m to -14.4m. ~25.5m-(-14.4) = 39.9 m traveled 39.9m/7s= 5.7 m/sWhat is a joule? Pls only answer if you know the answer.
Answer:
the SI unit of work or energy, equal to the work done by a force of one newton when its point of application moves one meter in the direction of action of the force, equivalent to one 3600th of a watt-hour.
Explanation:
Joule, unit of work or energy in the International System of Units (SI); it is equal to the work done by a force of one newton acting through one metre. Named in honour of the English physicist James Prescott Joule, it equals 107 ergs, or approximately 0.7377 foot-pounds.
what do you notice about gravity in space?
Answer:
gravity is everywhere in space and objects in space are always falling: towards the earth, towards the sun, and towards the galactic center
Explanation:
A sea turtle must crawl up a beach to lay eggs. Ignoring friction, what work must a 140-kg turtle do in lifting herself 2.5 m above the level of the sea?
Answer:
3500joules of work
Explanation:
Work done = Force×,distance
Given
Focrce= mass ,× acceleration = 140×10 = 1400N
Distance moved = 2.5m
Workdone = 1400×2.5
Work done = 140×25
Workdone = 3500Joules
Name 10 transition metals
Answer:
Scandium (Sc), Titanium (Ti), Vanadium (V), Chromium (Cr), Manganese (Mn), Iron (Fe), Cobalt (Co), Nickel (Ni), Copper (Cu)
Explanation:
the transition element or transition metal occupy the short columns in center of the periodic table, between Group 2A and Group 3A
BEARS
Timothy made the model shown below to represent the steps in the formation of a torrado
Severe
thunderstorm
High winds
push
clouds
Rotation
within
thunderstorm
O2010 FLVS
Which of these best fits the empty cell in Timothy's model? (2 points)
O cool, dry air forms clouds
O cool, dry air meets warm, moist air
O water vapor condenses in douds
O water vapor evaporates from ocean
Answer: cool, dry air meets warm, moist air
Explanation:
Just did the test, it was correct
Answer:
cool, dry air meets warm, moist air
Explanation:
I took it and I pass
3) A 100kg man runs up a staircase
3 cm high in 5 seconds. How much
pouwer does he develop?
Answer:
Power = 5.88 Watt
Explanation:
Mechanical Work and Power
Mechanical work is the amount of energy transferred by a force. Its SI unit is the joule.
Being the force vector and the displacement vector, the work is calculated as:
[tex]W=\vec F\cdot \vec s[/tex]
If both the force and displacement are parallel, then we can use the equivalent scalar formula:
[tex]W=F.s[/tex]
Power is the amount of energy transferred or converted per unit of time. In the SI, the unit of power is the watt, equal to one joule per second.
The power can be calculated as:
[tex]\displaystyle P=\frac {W}{t}[/tex]
Where W is the work and t is the time.
The m=100 Kg man goes up a distance of s=3 cm = 0.03 m in t=5 seconds. To calculate the work done against gravity the weight is considered as the force:
F = m.g = 100*9.8
F = 980 N
The work is:
W = 980*0.03
W = 29.4 J
Finally, the power is:
[tex]\displaystyle P=\frac {W}{t}[/tex]
[tex]\displaystyle P=\frac {29.4}{5}[/tex]
P = 5.88 Watt
Find the weight of a 4.2 kg backpack,
A) 41.16 N
B) 0.42 kg
C) 41.16 kg
D) 0.42 N
Answer:
Although the weight is given and we are asked for the weight, the odd wording of the question implies that we are being asked for the gravitational force on the backpack.
If it is gravitational force that is being requested, then the correct answer is A) 41.16 Newtons.
If it is actual weight being asked for, then none of the answers are correct, as the weight of 4.2 kg is given in the question, and does not match any of the answers.
what is the avarage speed during kick 1
Which has a charge with the greatest magnitude?
An object with charge 0
An object with charge -2
An object with charge-3
An object with charge +2
Answer:
an object with charge -3
What is the kinetic energy of a 0.5 kg puppy that is running 1.5m/s
Answer:
0.5625 Joules
Explanation:
The equation to calculate kinetic energy is:
[tex]KE = \frac{1}{2}mv^2[/tex]
So, plug in all given info and calculate:
[tex]KE = \frac{1}{2}(0.5)(1.5)^2 = 0.5625J[/tex]
And that's your answer! :)
What are two reasons that digital storage of data is so reliable?
Answer:memory chips don’t not break and digital data can usually can be recovered even if storage device stops working
Explanation:
Answer:
Explanation:
Memory chips are sturdy and it is usually possible to recover data from a memory chip even when the device containing it is broken
An astronaut weighs 107 Newtons when he stands on the surface of Europa on one of Jupiter's moons if europa's gravitational acceleration is 1.3 m s squared what is the astronauts Mass
Answer:
I think it would be 179kb
1. The lamp in your room is marked (100
W, 220 V). What do these readings mean?
Calculate, in J and in kWh, the electric ener-
gy consumed for 5 hours of lighting. Deduce
the monthly cost if the price of one kWh is
55 L.L.
Answer:
See the answers below
Explanation:
The data of 100W means power, and the other data of 220V means voltage, that is to say that bulb serves to work at a voltage of 220V100W datum means power.
J means work that is given in Joules [J], we must remember that power is defined as the relationship between work at a certain time, therefore we can determine work by means of the following expression.
[tex]P=W/t\\[/tex]
where:
P = power [Watt]
W = work [J]
t = time [s]
[tex]W=P*t\\W=100*5[hr]*[\frac{3600s}{1hr} ]\\W=1800000[J] = 1.8[MJ][/tex]
Now the electric cost.
[tex]0.1[kW]*5[hr]*55\frac{LL}{1kwhr} =27.5[LL][/tex]
If the magnitude of a vector is√8 .If it's x-component is 2 ,then it's y- component is
Answer:
The answer is below
Explanation:
A vector quantity is a quantity that has both magnitude and direction. The magnitude of a vector is the length of that vector.
The magnitude of a vector a with a x component of x and y component of y is given by the formula:
[tex]|a|=\sqrt{x^2+y^2}[/tex]
Given that the vector has a magnitude of √8, the x component is 2 and the y component = y. Hence:
[tex]\sqrt{8}=\sqrt{2^2+y^2}\\\\squaring\ both\ sides:\\\\8=4 + y^2\\\\y^2=8-4\\\\y^2=4\\\\square\ root\ of\ both\ sides:\\\\y=\sqrt{4} \\\\y=\pm 2\\\\y=+2\ or\ y=-2[/tex]
If constants aren't given in an experiment, what can be constant in the experiment?
Answer:
Anything in an experiment that remains unchanged.
Explanation:
An example could be the temperature of the laboratory room. If there is something that has an effect on an experiment that is not variable, it is a constant. Another constant could be, say, if you were doing calculations with the same amount and kind of fluid throughout the experiment, then that fluid would also be a constant.
How are water scarcity and water pollution related?
Water pollution contributes to water scarcity.
Water pollution is a solution to water scarcity.
Water scarcity is a solution to water pollution.
Water scarcity contributes to water pollution.
Answer:
A. Water pollution contributes to water scarcity.
Explanation:
Water pollution occurs when materials are disposed in water body, thus making it unfit for use. A polluted water can not be used for various purposes that water can be used for. Examples include: recreation, drinking, washing etc.
Water scarcity is the situation when available water is not sufficient for the use of organisms in a community. This majorly occurs in arid area.
Thus, since a polluted water renders water to be useless, therefore water pollution contributes to water scarcity.
Answer:
Water contributes to water scarcity
Explanation:
pls nobody has ever given me brainiest pls give me brainliest
which eletromagnetic waves have the lowest frequency radio waves micro waves x rays or gamma rays
Answer: Radio waves have the lowest energies, longest wavelengths, and lowest frequencies of any type of EM radiation. In order from highest to lowest energy, the sections of the EM spectrum are named: gamma rays, X-rays, ultraviolet radiation, visible light, infrared radiation, and radio waves.
Explanation:
A 1000-kg car comes to a stop without skidding. The car's brakes do 50,000 J of work to stop the car. Which of the following was the car's velocity when the brakes were initially applied?
Answer:
10m/s
Explanation:
will give brainliest if they answer is correct
Answer:
When a motorcycle takes a turn, centrifugal force—in this case, friction between the tires and the road—pushes it towards the center. This basic physics explains why riders can lean into turns without falling. However, when an outside force disrupts or unbalances these forces, the vehicle crashes. that is the only one that I can answer for you. :)
Answer:
Explanation:
This question needs more information (Sedan)
Two waves arrive at the same place at the same time exactly in step with each other. Each wave has an amplitude of 2.5 m. The resulting wave has an amplitude of
Answer:
5m
Explanation:
Whenever Two or more than two waves get to the same point/place, and they arrive at the same time, then there will be "superimposition" onto one another. Then there would be corresponding of each disturbance to a Amplitude or force, and since these disturbance maintain same line, "THEN THE RESULTING WAVE WILL BE THE ADDITION OF THE AMPLITUDE"
Superposition can be explained as the action that takes place as a result of two waves occupying same point.
To find the waves at this point, then " THE AMPLITUDE WILL BE ADDED TOGETHER"
Given:
Amplitude of first wave= 2.5m
Amplitude of second wave= 2.5m
The resulting wave will have an amplitude of(2.5m + 2.5m)=5.0m
Hence, The resulting wave has an amplitude of 5.0m
The Kentucky Derby is one of the most exciting horse races run every year. In 1973, the horse Secretariat set a record that still stands. This 500-kg horse ran the 2000-m track in 120 s. What was Secretariat's average kinetic energy? (1 kJ = 1000 J)
Answer:
69.44kJ
Explanation:
Kinetic energy is expressed as;
KE = 1/2mv^2
m is the mass = 500kg
v is the velocity
Get the velocity;
v = displacement/time
velocity = 2000/120
velcoity = 16.7m/s
Gt the kinetic energy
KE = 1/2 * 500 * 16.7²
KE = 250*277.78
KE = 69,444.4Joules
Since 1000J = 1kJ
69,444.4Joules = 69,444.4/1000
69,444.4Joules = 69.44kJ
Hence the Secretariat's average kinetic energy is 69.44kJ
Answer:C 69.0kJ
Explanation:
A driver brings a car to a full stop in 2.0 s. If the car was
initially travelingat 22 m/s, what is the acceleration?
A baseball is thrown upward at 20m/s. At what time is the ball 10m above the point at which it was released?
Answer:
0.583 seconds
Explanation:
We are dealing with free-fall motion, which has a constant acceleration of -g, acceleration due to gravity, so we can use a constant acceleration equation to solve this problem.
List out known variables and the variable that we want to solve for:
v_0 = 20 m/sa = -9.8 m/s² Δx = 10 mt = ?Find the kinematic equation that contains all four of these variables:
Δx = v_0 t + 1/2at²Plug known values into the equation.
10 = 20 t + 1/2(-9.8)t²Distribute 1/2 inside the parentheses.
10 = 20t - 4.9t²Set the equation equal to 0 and rearrange the terms so they are in descending degree order.
0 = -4.9t² + 20t - 10Factor this equation by using the quadratic formula. You should get:
t = 3.498 s, t = 0.583 sLet's look at these numbers within the context of the problem. If the ball's speed is 20 m/s, then after 1 second, it would reach a height of 20 m.
However, we want to find the time that it would take the ball to reach a height of 10 m, which is half of 20 m. Therefore, the time to reach 10 m should be around 0.5 seconds.
t = 0.583 is the closest to 0.5 seconds, and it fits within the context of the problem. Therefore, the answer is 0.583 seconds.
A 5 kg rifle fires a 15 g bullet at a muzzle velocity of 600 m/s. Find the recoil velocity of
the rifle
Answer:
v₂ = 1.8 [m/s]
Explanation:
To be able to solve this problem we must raise the principle of conservation and quantity of movement. It is going to study the momentum before and after the firing of the rifle.
P = m*v
where:
P = momentum [kg*m/s]
m = mass [kg]
v = velocity [m/s]
Now we need to analyze the moment before and after the shot.
[tex](m_{1}+m_{2})*v_{1}=-(m_{1}*v_{2})+(m_{2}*v_{3})[/tex]
where:
m₁ = mass of the rifle = 5 [kg]
v₁ = velocity of the rifle and the bullet before firing = 0 (no movement)
m₂ = mass of the bullet = 15 [g] = 0.015 [kg]
v₂ = velocity of recoil [m/s]
v₃ = velocity of the bullet after firing = 600 [m/s]
Now replacing:
[tex](5+0.015)*0 = -(5*v_{2})+(0.015*600)\\9 = (5*v_{2})\\v_{2}=1.8 [m/s][/tex]
Momentum is the product of mass and velocity. The recoil velocity of the rifle weighing 5 kg is 1.8 m/s.
What is conservation of momentum?According to the law of conservation of momentum if two objects are in contact with each other then for that system of the two objects the momentum of the object before will be equal to the momentum of the object after the collision.
GIven to us
Mass of the rifle, M = 5 kg
Mass of the bullet, m = 15 g = 0.015 kg
Velocity of the bullet afterwards, v₂ = 600 m/s
We know that according to the law of conservation of momentum, the momentum of the bullet and riffle before shooting will be equal to the momentum of the bullet and riffle after shooting.
[tex]Mu_1 + mu_1 = Mv_1 + mv_2[/tex]
Since, before shooting the bullet was in the riffle and the velocity of both was 0,
[tex]M(0) + m(0) = Mv_1 + mv_2\\\\-Mv_1 = mv_2\\\\v_1 = -\dfrac{m \times v_2}{M}[/tex]
Substitute the values,
[tex]v_1 = -\dfrac{0.015 \times 600}{5}\\\\v_1 = -1.8\rm\ m/s[/tex]
Thus, the recoil of the rifle is -1.8 m/s, the negative sign denotes that the velocity of recoil was in opposite direction to the bullet.
Hence, the recoil velocity of the rifle weighing 5 kg is 1.8 m/s.
Learn more about Momentum:
https://brainly.com/question/4956182
A object with a mass of 1.5 kg is lifted from the ground to a height of 0.22 m what is the objects potential energy
Answer:
3.3 JExplanation:
The potential energy of a body can be found by using the formula
PE = mgh
where
m is the mass
h is the height
g is the acceleration due to gravity which is 10 m/s²
From the question we have
PE = 1.5 × 10 × 0.22
We have the final answer as
3.3 JHope this helps you
A 10 Kg dog is running with a speed of 5.0 m/s what is the minimum work required to stop the dog
Answer:
25J
Explanation:
Given parameters:
Mass of the dog = 10kg
Speed of the dog = 5m/s
Unknown:
The minimum energy required to stop the dog = ?
Solution:
The dog is moving with a kinetic energy and to stop the dog, an equal amount of kinetic energy generated must be applied to the dog.
To find the kinetic energy;
K.E = [tex]\frac{1}{2}[/tex] m v²
m is the mass
v is the velocity
Now insert the parameters and solve;
K.E = [tex]\frac{1}{2}[/tex] x 10 x 5 = 25J