A 60 g tennis ball with an initial speed of 39 m/s
hits a wall and rebounds with the same speed. See attachment for graph

When a thing gains electrons in electricity, it'll become negatively charged. The collection of phenomena known as electricity is related to the existence and mobility of matter that possesses an electric charge.

The movement of electricity generation or charge is known as electricity. It is a sustainable energy source, meaning that we obtain it through the conversion of main energy sources like coal, fossil fuels, oil, nuclear power, and many other essential minerals.

In accordance with the U.S. Energy Management Administration, coal, nuclear power, and natural gas made up the majority of the country's electrical generation in 2020. Sources of renewable energy like wind, electricity, solar, biomass, wind, and groundwater are also used to generate electricity.

To know more about electricity visit:

https://brainly.com/question/1922668

#SPJ4

Height of cliff where a diver jumps  is 36.9m and from base the diver will be out by 3.6m distance.

The distance of a point from the y-pivot is called its x-direction, or abscissa. The distance of a point from the x-hub is called its y-direction, or ordinate. The directions of a point on the x-hub are of the structure (x, 0), and of a point on the y-hub are of the structure (0, y).

For calculating distance in horizontal direction (in positive x-axis),we need to use second equation of motion which is given by the formula

S=ut + (1/2)at²

In x-direction acceleration in x-direction=0m/sec²

So, value of a=0m/sec²

Value of u=1.6m/sec, t=3.0sec

=>S=1.6 ×3=3.8m

Similarly, for calculating distance in vertical direction (in positive x-axis),we need to use second equation of motion which is given by the formula

S=ut+ (1/2)at²

In y-direction,acceleration is 9.8m/sec²

Also,in y-direction initial velocity(u) is 0m/sec.

=>S=0×t + (1/2)×9.8×(3.0)²

=>S=0+4.9×9

=>S=36.9m

Hence,height is 36.9m and distance in horizontal direction is 3.8m

To know more about distance, visit here:

https://brainly.com/question/28354920

#SPJ4

Given the power PP of an electric circuit is related to the circuit's resistance RR and current II by the equation P = RI^2

we want to find dP/dt, dR/dt and dI/dt if none of P, R and I are constant:

P = RI^2 = dP/dt = R. 2I dI/dt+I^2dR/dt = dP/dt = 2RIdI/dt= I^2dR/dt.

At the point when an electric current courses through a bulb or any conveyor, the channel offers a check to the current and this obstacle is known as electrical resistance and is indicated by R. Each material has an electrical resistance and this is the motivation behind why conveyors give out heat when current goes through it

As per Ohm's law, there is a connection between the current moving through a guide and the likely distinction across it. It is given by,

V ∝ I V = IR

Where,

V is the potential contrast estimated across the guide (in volts)

I is the current through the guide (in amperes)

R is the consistent of proportionality called resistance (in ohms)

to know more about ohm's law click here:

https://brainly.com/question/14296509

#SPJ4

The two cubes have different inertias. The cubes are connected to each other by a spring, and a hammer strikes them in the two ways.

Then, b) the center of mass of the system will move with the same velocity in either case.

The center of mass of an object can be known when the difference is thrown, so there will be a point of the object whose motion is like a parabola. For example, if a base ball bat is thrown, the whole point will move. There is a point whose motion is like the motion of a particle, namely parabolic motion. The tip of the beater, which was initially at the bottom when it was at the peak of the movement, was at the bottom.

The tip rotates. But there is a point on the bat that moves like a particle. This point is called the center of mass.

Learn more about center of mass at https://brainly.com/question/29576405.

#SPJ4

Enthalpy of formation of a substance is defined as the change in enthalpy when one mole of a substance is formed from its constituent elements in their standard states. In the case of vacancies in pure copper, the enthalpy of formation is given as 86.9 kJ/mol.

The fraction of sites vacant at a certain temperature can be determined using the Boltzmann distribution law, which states that the fraction of particles in a system with energy E is proportional to e^(-E/kT), where k is the Boltzmann constant and T is the temperature in kelvin.

To find the fraction of vacant sites, we need to calculate the energy required for a vacancy to form, which is given by the enthalpy of formation. We can then use this energy in the Boltzmann distribution equation to find the fraction of sites that are vacant at a given temperature.

At 1084°C, the temperature in kelvin can be calculated as 1084°C + 273.15 = 1357.15 K. Substituting this value and the enthalpy of formation into the Boltzmann distribution equation gives us the fraction of sites that are vacant.

However, this calculation is only a rough estimate and real systems are more complex. Factors such as the presence of impurities, lattice defects, and external influences can affect the fraction of vacant sites and cannot be accounted for by this simple calculation.

Here you can learn more about enthalpy of formation

https://brainly.com/question/28302300#

#SPJ11

It was spot on. 2.54 / 10.16 cm = 4 in C.

What is Length ?

Length is a term used to describe the distance between two points on an object or the dimension of an object along a particular axis.  Length is usually measured in units of distance, such as meters, centimeters, inches, or feet.

In physics, length is an important concept used to describe the size of objects, the distance between two points, or the dimensions of a space. In engineering and construction, length is used to design and build structures, such as bridges and buildings, to ensure they are safe and fit for their intended purpose.

To know more about Length , click the given link below ;

https://brainly.com/question/2217700

#SPJ1

The minimum index of refraction of the prism is 1.414.

What does light ray is incident mean?

Light ray incident is a term used to describe when a light ray strikes a surface. This can refer to light from any source, such as the sun, a light bulb, or a laser. When light rays are incident on a surface, they may be reflected, absorbed, or transmitted. The behavior of the light depends on the properties of the surface, such as its color, texture, and composition.

This double internal reflection requires that the angle of incidence (45º) at the 1st prism side is at least = critical angle. This reflected ray then meets the other prism side at the same angle of incidence (45º). so we only need to consider the first internal reflection.

Applying [ n sin i = constant ] to the prism-air boundary.

(np= ref.index for prism material, nₒ = ref.index for air =1.0 )

At a critical angle of incidence 45º, external angle = 90º

np sin 45 = nₒ sin90

np = nₒ sin90 / sin45=1 x 1 / 0.7071

np(min) = 1.414

Therefore, 1.414 is the minimum index of refraction of the prism.

To learn more about light ray is incident from the link

https://brainly.com/question/28745793

#SPJ4

The minimum index of refraction of the prism for which the ray will totally internally reflect at each of the two sides making the right angle is 1.414.

What does light ray is incident mean?

Light ray incident is a term used to describe when a light ray strikes a surface. This can refer to light from any source, such as the sun, a light bulb, or a laser. When light rays are incident on a surface, they may be reflected, absorbed, or transmitted. The behavior of the light depends on the properties of the surface, such as its color, texture, and composition.

This double internal reflection requires that the angle of incidence (45º) at the 1st prism side is at least = critical angle. This reflected ray then meets the other prism side at the same angle of incidence (45º). so we only need to consider the first internal reflection.

Applying [ n sin i = constant ] to the prism-air boundary.

(np= ref.index for prism material, nₒ = ref.index for air =1.0 )

At a critical angle of incidence 45º, external angle = 90º

np sin 45 = nₒ sin90

np = nₒ sin90 / sin45=1 x 1 / 0.7071

np(min) = 1.414

Therefore, 1.414 is the minimum index of refraction of the prism.

To learn more about light ray from the link

brainly.com/question/28745793

#SPJ4

No, it is not true that the speed of the object is equal to zero. Hence, it is impossible for an object to have zero speed and non-zero velocity.

Since distance is also a scalar, it will not be negative even if we move in the opposite direction. It never stops adding, regardless of the direction. Therefore, a moving body's total travel distance cannot be zero. Therefore, the total average speed cannot be zero, and if the body is moving, it will be nonzero.

In meters per second, speed is the rate at which an object changes position. For instance, if an object moves three meters in three seconds from its origin, its speed is one meter per second. The formula for speed is straightforward: time divided by distance.

Learn more about speed:

brainly.com/question/6504879

#SPJ4

28 Inches is 2.33 Feet

What does the measuring unit foot mean?

"Feet" is the plural form of the single unit of measurement known as "foot." The symbol for foot or feet is, and the abbreviation is ft. One foot-long bags, for instance, can be written as either 1 ft or 1'.

Simply measure the length in inches, multiply the result by 12, and then you will have the conversion to feet. The linear footage is the resultant number. Height and width are unimportant for this dimension.

1 inch equals 2.54 cm or 0.0254 m.

1 ft. = 12 in. = 0.3048 m

1 foot equals 12 inches, 28 inches will be  2.33333 feet (ft).

To know more about measurements use link below:

https://brainly.com/question/563337

#SPJ4

The method employed in this experiment is the method of limits.

The method of limits is a psychophysical technique in which the stimulus intensity is graduhttps://brainly.com/question/28500977?referrer=searchResultsally increased or decreased until the subject's response changes. In the case of the "Relative Misalignment" experiment, the stimulus intensity (the degree of misalignment) is gradually increased until the subject perceives a change in the strength of the stimulus. The method of limits is used to determine the threshold of perception, or the point at which the subject can detect a change in the stimulus. In this way, the method of limits can be used to measure the sensitivity of the subject's sensory system to changes in the stimulus.

Here you can learn more about the method of limits

https://brainly.com/question/28500977#

#SPJ11

Answer:

The answer is: B.it becomes more expensive to hold money as cash

When interest rates rise, the amount of revenue that you can make when making investments would also rise.

This mean that if you choose to hold your money as cash, you would lose all of the potential earning that you might obtain from turning that money into investments. This make your cash has less monetary value compared to investments.

Explanation:

To maintain the same resistance, we need to increase either the length or decrease the cross-sectional area to compensate for the increased resistivity of metal B. One option could be to increase the length of the resistor to 18 cm and keep the cross-sectional area the same. Another option could be to decrease the cross-sectional area to 1.5 cm^2 and keep the length the same.

The resistance of the resistor can be calculated using the following formula:

R = ρ * L / A

where

ρ = resistivity (2 ohm-cm for metal A)

L = length (9 cm)

A = cross-sectional area (3 cm^2)

R = 2 ohm-cm * 9 cm / 3 cm^2 = 6 Ω

To design a resistor with the same resistance using metal B (ρ = 6 ohm-cm), we need to keep the resistance formula constant:

R = ρ * L / A

6 Ω = 6 ohm-cm * L / A

Learn moe about resistance here: brainly.com/question/29427458

#SPJ4

Star A is thus (3.24^4 = 51.2) times brighter than star B.

In physics, brightness is the subjective visual feeling associated with the intensity of light emerging from a surface or a point source (see luminous intensity). Luminance is a quantitative and measurable property. Whereas brightness cannot be measured scientifically, it can only be sensed. We can tell if a light source is bright or dim, therefore brightness is the visual sense that alerts us to changes in luminance.

Here,

The relationship between temperature and brightness in stars is described by the Stefan-Boltzmann law, which states that the total energy emitted by a star per unit time (its luminosity) is proportional to the fourth power of its temperature.

L ∝ T^4

where L is the luminosity and T is the temperature.

If star A is 3.2 times hotter than star B, then its temperature is 3.2 times higher:

T_A = 3.2 T_B

So, its luminosity is proportional to the fourth power of its temperature:

L_A ∝ T_A^4 = (3.2 T_B)^4 = 3.2^4 T_B^4 = 3.2^4 L_B

Therefore, star A is (3.2^4 = 51.2) times brighter than star B.

To know more about brightness,

https://brainly.com/question/9739905

#SPJ4

Answer:

1500 Ω

Explanation:

The resistance of the sensor circuit can be found using Ohm's law, R = V/I, where R is resistance, V is voltage, and I is current.

R = 3.0V / 2.0 x 10^-4 A = 1500 Ω.

So the resistance of the sensor circuit is 1500 Ω.

Explanation:

The volume charge density, p, is the amount of charge per unit volume of charged object. To calculate the volume charge density of a sphere, you would need to know the total charge on the sphere and the volume of the sphere. Without knowing these values, it is not possible to determine the volume charge density of the sphere.

Charge density per volume is equal to A(Rr) for a sphere with radius R Charge density

The object's capacity is another name for it. The charge every unit volume of a charged item is expressed as p, or volume charge density. You would require to know the sphere's volume and total charge in order to compute the cubic charge density of the sphere.

The length, breadth, and height are multiplied by the volume formula. The good news for a cubic is that each of these measures has exactly the same measurement. The length of the any side can therefore be multiplied by three.

To know more about charge   visit:

https://brainly.com/question/18750504

#SPJ4

After the dark wand touched the basket, The basket took on a negative charge, the charge was decreased. The dark wand stole electrons from the pail since it had a negative charge.

Charge is a fundamental property of matter that describes the electrical interaction between objects. It is a scalar quantity with units of Coulombs (C) in the SI system. There are two types of charges: positive and negative.

Positive charges have more protons than electrons and are attracted to negative charges. Negative charges have more electrons than protons and are attracted to positive charges. Objects with the same charge will repel each other.

Charge is conserved, meaning that the total charge in a system remains constant, even though the charge distribution can change. This is known as the law of conservation of charge.

Therefore, After the dark wand touched the basket, The basket took on a negative charge, and the charge was decreased. The dark wand stole electrons from the pail since it had a negative charge.

To know more about charge refer to:

brainly.com/question/11944606

#SPJ4

The minimum constant acceleration required for the aircraft to be airborne after a takeoff run of 230 m is 10.9 m/s^2.

We can use the kinematic equation to find the minimum constant acceleration required for the aircraft to be airborne after a takeoff run of 230 m.

The kinematic equation is given by:

v^2 = u^2 + 2as

where

v = final velocity (takeoff velocity)

u = initial velocity (0 m/s, since the aircraft starts from rest)

a = acceleration

s = displacement (230 m)

Since the final velocity of the aircraft must be sufficient to be airborne, we can assume it to be the minimum takeoff velocity, which is typically around 50 m/s.

Substituting the values in the equation, we get:

50^2 = 0^2 + 2as

2500 = 2as

a = 2500 / 2s

a = 2500 / 2 * 230

a = approximately 10.9 m/s^2

So, the minimum constant acceleration required for the aircraft to be airborne after a takeoff run of 230 m is approximately 10.9 m/s^2.

Learn more about acceleration here: brainly.com/question/12550364

#SPJ4

The force exerted on the wall is the product of acceleration and mass of the ball. Acceleration of the wall is - 1600 m/s² . The force exerted on the wall is 80 N.

Force is an external agent acting on an object to change its state of motion or rest.  According to Newton' second law of motion, force is the product of acceleration and mass of the object.

Acceleration of a moving object is the rate of change in its velocity.

time  = 1/ 800 s

change in velocity = 18 -20 = -2 m/s

acceleration = -2 m/s/ (1/800 s) = - 1600 m/s²

mass of the ball = 50 g = 0.05 kg.

then  force = 0.05 kg × -1600 m/s² = - 80 N.

Therefore, the force applied on the wall is 80 N.

Find more on force:

https://brainly.com/question/14110395

#SPJ1

Simple diffusion of a molecule down its concentration gradient requires an input of energy to the system is false.

Diffusion is a type of molecule movement down its concentration from a higher concentration to a lower concentration. Because of that, it doesn’t require the energy (ATP) from respiration. The molecule only uses kinetic energy. Based on these characteristics, diffusion is included in passive transport.

Diffusion can either be simple diffusion or be facilitated by another molecule. Simple diffusion is the movement of molecules along their concentration gradient without the direct involvement of any other molecules, while facilitated diffusion is the transport of molecules via a protein membrane.

Thus, simple diffusion doesn’t need energy for regulating the molecule passing through the membrane.

Learn more about simple diffusion by clicking this link :

https://brainly.com/question/13064441

#SPJ4

The speed is 282.84 if the tension is doubled.

According to the question, the speed of the tension is as follows

The formula we will use is

v = √ T /ρ

where v is the speed of the wave, T the tension in the wire, and ρ the density of the wire

If the tension is doubled

T = 2T₀

v = √ (2T₀ / ρ)

v = √2   √ T₀ / ρ

v = √2  v₀

Therefore,

v = √2  200

v = 282.84 m / s

What is the speed if the tension is doubled?

If the tension is doubled, what happens to the speed of the waves on the string? Since the speed of a wave on a taunt string is proportional to the square root of the tension divided by the linear density, the wave speed would increase by √2.

What is the wave speed on a string under tension?

The speed of a pulse or wave on a string under tension can be found with the equation. |v|=√FTμ where FT is the tension in the string and µ is the mass per length of the string.

To know more about wave speed:

https://brainly.com/question/3148541

#SPJ4

The fundamental unit of weight in the measuring units is the kilogram, or kilogramme. It is roughly equivalent to the weight of a water cube that is 10 centimeters in size.

What is the perfect weight for you?

Simply defined, having an optimum body weight means that you have a sleek, healthy physique and are not too thin (underweight) or even too huge (overweight). The best way to find this is to calculate your Bi, or body mass index.

How is a person's weight determined?

Throughout the world, body weight is expressed in kilos, a unit of mass, while in some nations, like the United States, it is measured by pounds or, as in the U.k., in stones and pounds. Even in the U.s, the majority of hospitals today use kilograms for

To know more about weight visit:

https://brainly.com/question/10990268

#SPJ4

A) Yes, the Great Plains were formed from the sediments from the Mississippi River.

The rock of the Great Plains is sedimentary rock and the rock of the Rocky Mountains is igneous rock. They formed in different ways so they must not have formed together.

The Great Plains (Great American Desert) is a plain in North America that stretches from the Rocky Mountains, Canada to Mexico. It is bordered by the Rio Grande to the south, the Mackenzie River delta to the north, Canada to the east and the Rocky Mountains to the west.

This plain is a rocky, sandy area and is very short of water because it has a high evaporation rate. The Great Plains are about 3,000 miles (4,800 kilometers) long, 300–700 miles wide and about 1,125,000 square kilometers (2,900,000 square kilometers), about the equivalent of one third of the area of the United States.

Learn more about Great plains at https://brainly.com/question/20530869.

#SPJ4

It was Shiloh's initial archaeological dig. At the location, he found the most well-known relic.

From from 500 B.C. to roughly 1650 A.D., the Adena, Hopewell, and Fort Ancient Native American societies constructed mounds and enclosures in the Ohio River Valley for burial, religious, and occasionally defence purposes. In 1899, "Mound C" was penetrated by a trench that was built by Shiloh Park Commission chairman Cornelius Cadle. The first archaeological dig at Shiloh took place in 1350 CE, after which the site was abandoned. Around 1000 CE, indigenous people of the Late Woodland civilization first inhabited the area, followed by those of the Early Mississippian culture. The largest stone pipe carved into the form of a kneeling man was the most well-known relic he found at the location. Therefore, choice A is right.

Learn more about Mound C here:

https://brainly.com/question/30071912

#SPJ4

The velocity with which the sandbag strikes the ground is  -28.44m/s (downward).

Given the initial velocity of balloon (u) = 5m/s

The height of balloon (h) = 40m

The acceleration is due to the gravity = g = 9.8m/s^2 acting downwards.

A sandbag is released from height h of the balloon.

The velocity of sandbag as it reaches the ground = v

We know that from Newtons laws of motion v = u + at

We know that the bag strikes the ground at y =0m,

then y = h + ut - 1/2gt^2

0 = 40 + 5t - 1/2 x 9.8 x t^2

t = 3.41s

As we know that v = u - gt

v = 5 - 9.8 x 3.41 = -28.44m/s

To learn more about velocity click here https://brainly.com/question/28738284

#SPJ4

complete question: A hot-air balloonist, rising vertically with a constant velocity of magnitude 5.00m/s releases a sandbag at an instant when the balloon is 40.0m above the ground. With what magnitude of velocity does it strike the ground?

A device that automatically records temperature changes is called a thermograph. An instrument used to gauge heat or temperature is a thermometer. thermophile.

A bulb is present, and it is either liquid or gaseous. This is found inside the sensing end of the probe. When the gas expands or the liquid heats up, the attached rod pushes the needle to the temperature being measured.

When the temperature reaches a certain level, a temperature gauge will automatically control the temperature or activate a gadget. Hence, it has the ability to maintain a constant temperature in an oven or a water bath.

To know more about thermograph visit:

brainly.com/question/15300315

#SPJ4

By the help of  static electricity To move the negative charges from the truck to the ground and avoid a fire

The tyres on trucks hauling gasoline and other hazardous substances are engineered to be electrically conductive to prevent static electricity from building up and burning. As the truck moves further, the static electricity created by the tyres' friction with the ground may build up. If static electricity reaches a particular point, it might spark and explode. An explosion is avoided thanks to the tyres' electrical conductivity, which enables the static energy to be dispersed into the ground before it can build up to a harmful level. People transporting combustible materials are safer because the risk of an explosion is lower is drastically decreased by making the tyres conductive.

To learn more about Static Electricity

brainly.com/question/12791045

#SPJ4

Actually, every second of time sees a change in velocity of 10 m/s, which is a constant. When an object's velocity changes, it is referred to as accelerating; this implies that the object has an acceleration.

Velocity is the rate of change in direction of an object that is moving as measured by a specific standard of time and observed from a specific point of reference (for example, 60 km/h northbound).

According to the formula v = s/t, speed (v) is a scalar quantity that quantifies dislocation (or a shift in position, s), over change in time (t).

To know more about velocity visit:

https://brainly.com/question/28738284

#SPJ4

Whenever the net force on an object is zero, its acceleration is zero.Whenever the net force on an object is zero, its acceleration is zero. This means that the object is either at rest or moving at a constant velocity.

The net force on an object can be determined by summing up all the individual forces acting on it, and if the net force is zero, then the object is in a state of balanced forces, which results in a constant velocity or no acceleration. It is important to note that an object can still be in motion even if the net force on it is zero, as long as it is moving at a constant velocity.

Find more about Acceleration

brainly.com/question/13324407

#SPJ4

The ICF reflects a radical shift in the way practitioners view disability by moving away from a medical model of disability to a more holistic and person-centered approach. It recognizes that disability is a complex interaction between an individual's health condition, personal factors, and the environment and that the impact of a health condition on an individual's ability to participate in life activities cannot be understood in isolation.

The International Classification of Functioning, Disability and Health (ICF) is a framework for understanding the impact of health conditions on individuals and their ability to participate in life activities. The ICF represents a significant shift in the way practitioners view disability, as it moves away from a medical model of disability to a more holistic and person-centered approach.

Traditionally, disability was seen as a medical problem caused by a physical or mental impairment. This led to a focus on diagnosing and treating the underlying health condition, with the goal of reducing or eliminating the disability. This medical model of disability placed the individual with a health condition in the center and viewed their disability as a problem to be fixed.

The ICF, however, views disability as a complex interaction between an individual's health condition, personal factors, and the environment. It recognizes that disability is not just a result of a health condition but also a result of the individual's abilities and limitations in interacting with the environment. This means that disability is not just about the health condition but also about the social, cultural, and physical barriers that prevent the individual from participating in life activities.

The ICF takes a person-centered approach, where the focus is on the individual and their experiences, rather than just their health condition. It recognizes that the impact of a health condition on an individual's ability to participate in life activities is not just determined by the health condition itself, but also by the individual's personal factors, such as their age, education, and level of support, and the environment, such as the availability of accessible transportation and accommodations.

Here you can learn more about International Classification of Functioning, Disability and Health (ICF)

https://brainly.com/question/29657159#

#SPJ11

We say that light is an electromagnetic wave because it is an oscillation of electric and magnetic fields. The relationship between wavelength, frequency and velocity of light is ν = c/λ.

What's in an Electromagnetic Wave?

When an electric field combines with a magnetic field, an electromagnetic wave is produced. The magnetic and electric fields of an electromagnetic wave are perpendicular to each other and perpendicular to the wave direction.

Light is also a combination of oscillating electric and magnetic fields perpendicular to each other, with wave propagation perpendicular to both fields. Because light is produced by accelerating charged particles (photons), according to the laws of electromagnetism, light is an electromagnetic wave.

Therefore, We say that light is an electromagnetic wave because it is an oscillation of electric and magnetic fields. The relationship (c) between wavelength, frequency and velocity of light is ν = c/λ.

To learn more about Electromagnetic Wave, click on the given link: https://brainly.com/question/25847009

#SPJ4