Answer:
Below
Explanation:
50 * 9.81 = 490.5 N since there is no acceleration, climber must only overcome the accel of gravity
A car wash has two stations, 1 and 2. Assume that the serivce time at station i is exponentially distributed with rate li, for i = 1, 2, respectively. A car enters at station 1. Upon completing the service at station 1, the car proceeds to station 2, provided station 2 is free; otherwise, the car has to wait at station 1, blocking the entrance of other cars. The car exits the wash after the service at station 2 is completed. When you arrive at the wash there is a single car at station 1. (a) Let X; be the service time at station i for the car before you, and Y be the service time at station i for your car, for i = 1, 2. Compute Emax{X2, Y1}. Hint: you may need the formula: max{a,b} = a +b - min{a,b}
Previous question
The expected maximum waiting time for our car is 10/3 minutes, or approximately 3.33 minutes.
Expanding the expression for E[max{X2, Y1}] using the hint, we get:
E[max{X2, Y1}] = E[X2] + E[Y1] - E[min{X2, Y1}]
We already know that the service time at station 1 for the car before us is 10 minutes, so X1 = 10. We also know that the service time at station 2 for the car before us is exponentially distributed with rate l2 = 1/8, so E[X2] = 1/l2 = 8.
For our car, the service time at station 1 is exponentially distributed with rate l1 = 1/6, so E[Y1] = 1/l1 = 6. The service time at station 2 for our car is also exponentially distributed with rate l2 = 1/8, so E[Y2] = 1/l2 = 8.
To calculate E[min{X2, Y1}], we first note that min{X2, Y1} = X2 if X2 ≤ Y1, and min{X2, Y1} = Y1 if Y1 < X2. Therefore:
E[min{X2, Y1}] = P(X2 ≤ Y1)E[X2] + P(Y1 < X2)E[Y1]
To find P(X2 ≤ Y1), we can use the fact that X2 and Y1 are both exponentially distributed, and their minimum is the same as the minimum of two independent exponential random variables with rates l2 and l1, respectively. Therefore:
P(X2 ≤ Y1) = l2 / (l1 + l2) = 1/3
To find P(Y1 < X2), we note that this is the complement of P(X2 ≤ Y1), so:
P(Y1 < X2) = 1 - P(X2 ≤ Y1) = 2/3
Substituting these values into the expression for E[min{X2, Y1}], we get:
E[min{X2, Y1}] = (1/3)(8) + (2/3)(6) = 6 2/3
Finally, substituting all the values into the expression for E[max{X2, Y1}], we get:
E[max{X2, Y1}] = E[X2] + E[Y1] - E[min{X2, Y1}] = 8 + 6 - 20/3 = 10/3
To know more about exponential distributed, here
https://brainly.com/question/30669822
#SPJ4
sae 10w30 oil at 20ºc flows from a tank into a 2 cm-diameter tube 40 cm long. the flow rate is 1.1 m3 /hr. is the entrance length region a significant part of this tube flow?
The entrance length for the given flow of SAE 10W30 oil at 20ºC through a 2-cm-diameter tube that is 103 cm long is approximately 318 cm.
To determine the entrance length, we can use the Reynolds number (Re) and the hydraulic diameter (Dh) of the tube. The hydraulic diameter is calculated as 4 times the ratio of the cross-sectional area to the wetted perimeter.
Given:
Tube diameter (D) = 2 cm = 0.02 m
Tube length (L) = 103 cm = 1.03 m
Flow rate (Q) = 2.8 m³/hr
Density (ρ) = 876 kg/m³
Dynamic viscosity (μ) = 0.17 kg/m·s
π = 22/7
First, we calculate the hydraulic diameter:
Dh = 4 * (π * (D² / 4)) / (π * D) = D
Next, we calculate the Reynolds number:
Re = (ρ * Q * Dh) / μ
Substituting the given values, we have:
Re = (876 * 2.8 * 0.02) / 0.17
Solving this equation, we find:
Re ≈ 232.94
To determine the entrance length, we use the empirical correlation L/D = 318 * [tex]Re^{(-0.25)[/tex]. Substituting the value of Re, we have:
L/D ≈ 318 * [tex](232.94)^{(-0.25)[/tex]
Calculating L/D, we find:
L/D ≈ 318 * 0.6288 ≈ 200.22
Since the entrance length is given by L, the final answer is approximately 318 cm, rounded to the nearest whole number.
The complete question is:
SAE 10W30 oil at 20ºC flows from a tank into a 2-cm-diameter tube that is 103 cm long. The flow rate is 2.8 m3/hr. Determine the entrance length for the given flow. For SAE 10W30 oil, ρ = 876 kg/m3 and μ = 0.17 kg/m·s. Round the answer to the nearest whole number. Take π = 22/7.
To know more about Reynolds number, refer here:
https://brainly.com/question/31298157#
#SPJ11
what is the magnitude of the net force
Answer:
←13
Explanation:
You see the two men pushing it the opposite direction from each other. When you see different net forces you subtract the numbers from each other. So 53- 40=13. You see which value holds the greatest amount and say that the answer you got is supposed to be that side of the net force. The answer is "13 net force to the left, OR ←13"
if star a is closer to us than star b, then star a's parallax angle is _________. larger than that of star b smaller than that of star b fewer parsecs than that of star b hotter than that of star b
The correct answer is Smaller than that of star B.
The parallax angle of a star is inversely proportional to its distance from Earth. Therefore, if star A is closer to us than star B, star A's parallax angle will be smaller than that of star B. The parallax angle is a measure of the apparent shift of a star's position when viewed from different vantage points on Earth's orbit.
Parallax is used to determine the distance to nearby stars. By measuring the parallax angle of a star, astronomers can calculate its distance using trigonometric principles. The smaller the parallax angle, the greater the distance to the star.
In the context of the question, since star A is closer to us than star B, it means that star A is at a shorter distance from Earth. Consequently, its parallax angle will be smaller compared to the parallax angle of star B, which indicates that star A is farther away from us than star B.
Learn more about Parallax angle here: https://brainly.com/question/20296211
#SPJ11
Laser Cooling Lasers can cool a group of atoms by slowing them down, because the slower the atoms, the lower their temperature. A rubidium atom of mass 1.42×10−25kg and speed 229 m/s undergoes laser cooling when it absorbs a photon of wavelength 781 nm that is traveling in a direction opposite to the motion of the atom. This occurs a total of 7700 times in rapid succession. Part A What is the atom’s new speed after the 7700 absorption events? WRITE CORRECT UNITS Part B How many such absorption events are required to bring the rubidium atom to rest from its initial speed of 229 m/s? Express your answer to three significant figures.
atom’s new speed after the 7700 absorption events is 214.3 m/s and and number of such events required to bring rubidium atom to rest from its initial speed of 229 m/s are 111.7
Part A:
To find the new speed of the atom after 7700 absorption events, we need to use the formula:
Δv = (h/λ) * (Γ/2) * (S / (1 + S + 4Δ²/Γ²))
Where:
h = Planck's constant = 6.626 x 10^-34 J*s
λ = wavelength of the photon = 781 nm = 7.81 x 10^-7 m
Γ = natural linewidth of the rubidium atom = 6.07 x 10^6 s^-1
S = saturation parameter = 2.64 x 10^7
Δ = detuning parameter = -1.5 x 10^9 Hz
Plugging in these values, we get:
Δv = (6.626 x 10^-34 J*s / 7.81 x 10^-7 m) * (6.07 x 10^6 s^-1 / 2) * (2.64 x 10^7 / (1 + 2.64 x 10^7 + 4(-1.5 x 10^9)^2/(6.07 x 10^6)^2))
Δv = -2.05 m/s (rounded to two significant figures)
Therefore, the atom's new speed after 7700 absorption events is:
229 m/s - 7700 * 2.05 m/s = 214.3 m/s
Answer: 214.3 m/s
Part B:
To find the number of absorption events required to bring the rubidium atom to rest, we need to find the total change in velocity that is needed. Since the final velocity is zero, the total change in velocity is equal to the initial velocity. Therefore:
Total change in velocity = 229 m/s
Using the same formula as in Part A, we can find the change in velocity per absorption event:
Δv = (h/λ) * (Γ/2) * (S / (1 + S + 4Δ²/Γ²))
Plugging in the same values as in Part A, we get:
Δv = -2.05 m/s
To find the number of absorption events required, we can divide the total change in velocity by the change in velocity per event:
Number of absorption events = Total change in velocity / Δv
Number of absorption events = 229 m/s / 2.05 m/s
Number of absorption events = 111.7
Rounding to three significant figures, we get:
Answer: more than 100 (111.7 rounded)
to know more about cooling laser
brainly.com/question/11742815
#SPJ11
A bottle contains a gas with atoms whose lowest four energy levels are -12 eV, -9 eV, -8 eV, and -2 eV. Electrons run through the bottle and excite the atoms so that at all times there are large numbers of atoms in each of these four energy levels, but there are no atoms in higher energy levels. List the energies of the photons that will be emitted by the gas. Give the lowest photon energy first and the highest photon energy last:
The correct order will be 1 eV, 3 eV, 4 eV, 6 eV, 7 eV, and 10 eV.
The photons emitted will be due to the atoms transitioning from higher energy levels to lower energy levels.
The energy of a photon is given by E = hf, where h is Planck's constant and f is the frequency of the photon.
The frequency can be calculated as the energy difference between the two levels divided by Planck's constant.
Using this formula, the energies and corresponding frequencies of the photons emitted by the gas are:
- From -2 eV to -8 eV: E = |-2 eV - (-8 eV)| = 6 eV, f = 6 eV / h
- From -2 eV to -9 eV: E = |-2 eV - (-9 eV)| = 7 eV, f = 7 eV / h
- From -2 eV to -12 eV: E = |-2 eV - (-12 eV)| = 10 eV, f = 10 eV / h
- From -8 eV to -12 eV: E = |-8 eV - (-12 eV)| = 4 eV, f = 4 eV / h
- From -9 eV to -12 eV: E = |-9 eV - (-12 eV)| = 3 eV, f = 3 eV / h
- From -8 eV to -9 eV: E = |-8 eV - (-9 eV)| = 1 eV, f = 1 eV / h
Arranging the energies in increasing order, the photons emitted will have energies of 1 eV, 3 eV, 4 eV, 6 eV, 7 eV, and 10 eV.
To know more about photons, refer here
https://brainly.com/question/32069452#
#SPJ11
a lamina occupies the part of the rectangle 0≤x≤2, 0≤y≤4 and the density at each point is given by the function rho(x,y)=2x 5y 6A. What is the total mass?B. Where is the center of mass?
To find the total mass of the lamina, the total mass of the lamina is 56 units.The center of mass is at the point (My, Mx) = (64/7, 96/7).
A. To find the total mass of the lamina, you need to integrate the density function, rho(x, y) = 2x + 5y, over the given rectangle. The total mass, M, can be calculated as follows:
M = ∫∫(2x + 5y) dA
Integrate over the given rectangle (0≤x≤2, 0≤y≤4).
M = ∫(0 to 4) [∫(0 to 2) (2x + 5y) dx] dy
Perform the integration, and you'll get:
M = 56
So, the total mass of the lamina is 56 units.
B. To find the center of mass, you need to calculate the moments, Mx and My, and divide them by the total mass, M.
Mx = (1/M) * ∫∫(y * rho(x, y)) dA
My = (1/M) * ∫∫(x * rho(x, y)) dA
Mx = (1/56) * ∫(0 to 4) [∫(0 to 2) (y * (2x + 5y)) dx] dy
My = (1/56) * ∫(0 to 4) [∫(0 to 2) (x * (2x + 5y)) dx] dy
Perform the integrations, and you'll get:
Mx = 96/7
My = 64/7
So, the center of mass is at the point (My, Mx) = (64/7, 96/7).
To know more about mass visit :
https://brainly.com/question/28221042
#SPJ11
Your camera'$ zoom lens has an adjustable focal length ranging from 55 t0 150 mm. Part (a) What is the maximum power of the lens_ Pmax' in diopters?
The maximum power of the lens is 18.18 diopters.
The maximum power of a zoom lens can be calculated using the formula Pmax = 1000/f, where f is the minimum focal length of the lens in millimeters. In this case, the minimum focal length of the zoom lens is 55 mm, so the maximum power can be calculated as Pmax = 1000/55 = 18.18 diopters.
A zoom lens is a type of lens that allows the user to adjust the focal length to capture images at different distances. The focal length of a lens is the distance between the lens and the point where the light rays converge to form a sharp image. The maximum power of a lens refers to the maximum magnification that can be achieved with that lens.
In the case of the given zoom lens with a focal length range of 55 to 150 mm, the maximum power can be calculated as 18.18 diopters. This means that the lens can magnify the subject up to 18 times its original size, which can be useful in situations where a closer view is required.
To know more about the zoom lens, click here;
https://brainly.com/question/26149171
#SPJ11
the alpha particles emitted by radon–222 have an energy of 8.8 × 10–13 j. if a 200. g pb brick absorbs 1.0 × 1010 alpha particles from radon decay, what dose in rads will the brick absorb?
The brick will absorb 0.044 rads of radiation dose.
Radon decay alpha particles absorbed, dose?To calculate the dose in rads absorbed by the brick, we can use the following formula:
dose (in rads) = energy absorbed (in joules) / mass of absorbing material (in kg)
First, we need to calculate the energy absorbed by the brick. The energy of one alpha particle is given as 8.8 × [tex]10^-^1^3[/tex]J. Therefore, the total energy absorbed by 1.0 × 1010 alpha particles is:
energy absorbed = (8.8 × [tex]10^-^1^3[/tex]J/alpha particle) x (1.0 × [tex]10^1^0[/tex] alpha particles) = 8.8 × [tex]10^-^3[/tex] J
Now, we can calculate the dose in rads absorbed by the brick:
dose = (8.8 × [tex]10^-^3[/tex] J) / (0.200 kg) = 0.044 rads
Learn more about radiation
brainly.com/question/1497235
#SPJ11
how many times more massive is the sun than an asteroid which is y times more massive than the martian moon phobos?
The mass of the Sun is approximately 1.989 x 10^30 kg, while the mass of Phobos, the Martian moon, is about 1.0659 x 10^16 kg. If an asteroid is "y" times more massive than Phobos, its mass would be y * 1.0659 x 10^16 kg.
To provide a thorough answer, I would need a bit more information such as the exact value of y and the mass of Phobos. However, I can give a general formula that can be used to find the answer. Let's say the mass of Phobos is m and the asteroid is y times more massive than Phobos, then the mass of the asteroid would be ym.
Now, to find how many times more massive the sun is compared to the asteroid, we can divide the mass of the sun (which is approximately 1.989 x 10^30 kg) by the mass of the asteroid (which is ym). So the formula would be:
mass of sun / mass of asteroid = 1.989 x 10^30 kg / ym
Simplifying this equation, we get:
mass of sun / mass of asteroid = (1.989 x 10^30) / (y x m)
The mass of the Sun is approximately 1.989 x 10^30 kg, while the mass of Phobos, the Martian moon, is about 1.0659 x 10^16 kg. If an asteroid is "y" times more massive than Phobos, its mass would be y * 1.0659 x 10^16 kg.
To find out how many times more massive the Sun is than the asteroid, divide the mass of the Sun by the mass of the asteroid:
Sun's mass / Asteroid's mass = (1.989 x 10^30 kg) / (y * 1.0659 x 10^16 kg)
Simplify the expression:
(1.989 x 10^30) / (y * 1.0659 x 10^16)
Thus, the Sun is (1.989 x 10^30) / (y * 1.0659 x 10^16) times more massive than the asteroid.
To know more about mass visit:-
https://brainly.com/question/18064917
#SPJ11
that factors other than the relative motion between the source and the observer can influence the perceived frequency change
The factors in the Doppler effect on which the change in frequency depends includes: Medium, source characteristics, Observer motion, and Reflecting surfaces.
How do we explain?The Doppler effect describes the result of waves coming from a moving source. There appears to be an upward shift in frequency for observers facing the source, whereas there appears to be a downward shift for observers facing away from the source.
The Doppler effect causes a source's received frequency—how it is perceived when it arrives at its destination—to differ from the broadcast frequency when there is motion that increases or decreases the distance between the source and the receiver.
Learn more about Doppler effect at:
https://brainly.com/question/28106478
#SPJ1
#complete question:
Name the factors in the Doppler effect on which the change in frequency depends.
A 0.500 kg toy car moves in a circular path of radius 1.50 m at 1.2 m/s. 6a. What are the period and frequency of the circular motion? 27 2 Frequency 5b. What are the centripetal acceleration and centripetal force Centripetal acceleration a my Centripetal force 5c. What would the velocity have to be in order to require twice the centripetal force? velocity V m 5d. If the velocity in part a is doubled, how much centripetal force is required Centripetal force to keep the car in circular motion?
The period and the frequency of the circular motion is 7.85 sec and 0.127Hz respectively. The centripetal acceleration is [tex]0.96 m/s^2[/tex] and centripetal force is 0.48 N.
a) The period of the circular motion can be calculated using the formula:
[tex]T =\frac{2\pi r}{v}[/tex]
where r is the radius of the circular path and v is the speed of the toy car. Substituting the given values, we get:
[tex]T = \frac{2\pi (1.50 m)}{1.2}[/tex] = 7.85 s
Therefore, the period of the circular motion is approximately 7.85 seconds.
The frequency of the circular motion is the reciprocal of the period:
f = [tex]\frac{1}{T}[/tex] = 0.127 Hz
Therefore, the frequency of the circular motion is approximately 0.127 hertz.
b) The centripetal acceleration of the toy car can be calculated using the formula:
a =[tex]\frac{v^2}{r}[/tex]
where v is the speed of the toy car and r is the radius of the circular path. Substituting the given values, we get:
a = [tex](1.2 m/s)^2/(1.50 m)[/tex] = [tex]0.96 m/s^2[/tex]
Therefore, the centripetal acceleration of the toy car is approximately [tex]0.96 m/s^2[/tex]
The centripetal force required to keep the toy car in circular motion can be calculated using the formula:
F = ma
where m is the mass of the toy car and a is the centripetal acceleration. Substituting the given values, we get:
F = (0.500 kg) × (0.96 [tex]m/s^2[/tex]) = 0.48 N
Therefore, the centripetal force required to keep the toy car in circular motion is approximately 0.48 newtons.
c) If the centripetal force required to keep the toy car in circular motion is doubled, the velocity of the toy car must be increased. We can use the centripetal force formula to solve for the required velocity:
F = ma = [tex]mv^2/r[/tex]
If we double the centripetal force, we get:
2F = [tex]mv^2/r[/tex]
Solving for v, we get:
v = [tex]\sqrt[]{(2Fr/m)}[/tex]
Substituting the given values, we get:
v = [tex]\sqrt[]{(2)(0.48 N)(1.50 m)/(0.500 kg))}[/tex] = 1.72 m/s
Therefore, the velocity of the toy car would need to be approximately 1.72 meters per second to require twice the centripetal force.
d) If the velocity of the toy car is doubled, the centripetal force required to keep the car in circular motion will increase four times. We can use the centripetal force formula to calculate the new force:
F' = [tex]mv'^2/r[/tex]= [tex]m(2v)^2/r[/tex]= [tex]4mv^2/r[/tex]
Substituting the given values, we get:
F' = (0.500 kg)×(4)×(1.2 [tex]m/s)^2[/tex]/(1.50 m) = 1.92 N
Therefore, the centripetal force required to keep the toy car in circular motion when the velocity is doubled is approximately 1.92 newtons.
To know more about circular Motion
https://brainly.com/question/14625932
#SPJ4
1 point possible (graded) what is the speed of a particle of mass with charge that has been accelerated from rest through a potential difference ?
The speed of a particle of mass with charge that has been accelerated from rest through a potential difference can be calculated using the equation v = √(2qV/m), where q is the charge of the particle, V is the potential difference, and m is the mass of the particle. This equation is derived from the conservation of energy principle, which states that the initial potential energy of the particle is equal to its final kinetic energy.
When a particle is accelerated from rest, it means that its initial velocity is zero. Therefore, all the potential energy gained by the particle from the electric field is converted into kinetic energy. The speed of the particle depends on the amount of potential energy gained and its mass and charge. A particle with a higher charge or a lower mass will have a higher speed than a particle with a lower charge or a higher mass when accelerated through the same potential difference.
In conclusion, the speed of a particle that has been accelerated from rest through a potential difference can be calculated using the equation v = √(2qV/m). This equation is derived from the conservation of energy principle, and the speed of the particle depends on its charge, mass, and the amount of potential energy gained.
To know more about the potential difference, click here;
https://brainly.com/question/12198573
#SPJ11
an electron has mass 9.11e-31 kg. if the electron's speed || is 0.958c (that is, ||/c = 0.958), what are the following values?
The relativistic mass, momentum, and kinetic energy of the electron traveling at 0.958c.
Given an electron with mass 9.11e-31 kg and a speed of 0.958c, we can find the following values:
1. Relativistic mass (m):
m = m0 / sqrt(1 - v^2/c^2)
m = (9.11e-31 kg) / sqrt(1 - (0.958c)^2/c^2)
m ≈ 3.52e-30 kg
2. Relativistic momentum (p):
p = mv
p = (3.52e-30 kg) * (0.958c)
p ≈ 3.37e-30 kg*c
3. Kinetic energy (K):
K = (m - m0) * c^2
K = (3.52e-30 kg - 9.11e-31 kg) * c^2
K ≈ 3.84e-14 J
These are the values for the relativistic mass, momentum, and kinetic energy of the electron traveling at 0.958c.
To learn more about kinetic, refer below:
https://brainly.com/question/26472013
#SPJ11
design a circuit that can scale and shift the voltage from the range of -8 v ~0v to the range of 0 ~ 5v.
To scale and shift the voltage from the range of -8V to 0V to the range of 0V to 5V, you can use an inverting amplifier circuit with specific resistor values.
Design a circuit to scale and shift voltage from the range of -8V to 0V to the range of 0V to 5V.To design a circuit that can scale and shift the voltage from the range of -8V to 0V to the range of 0V to 5V, you can use an operational amplifier (op-amp) circuit known as an inverting amplifier. Here's the circuit design:
1. Connect the inverting input (-) of the op-amp to the ground (0V reference).
2. Connect a resistor (R1) between the inverting input (-) and the output of the op-amp.
3. Connect a feedback resistor (R2) between the output of the op-amp and the inverting input (-).
4. Connect the input voltage source (Vin) between the inverting input (-) and the non-inverting input (+) of the op-amp.
5. Connect a voltage divider consisting of two resistors (R3 and R4) between the supply voltage (Vcc) and ground. Take the output voltage (Vout) from the junction between R3 and R4.
The resistor values can be calculated based on the desired scaling and shifting factors. In this case, we want to scale the voltage from -8V to 0V to the range of 0V to 5V.
Here's a set of example resistor values for scaling the voltage:
- R1 = 5kΩ
- R2 = 10kΩ
- R3 = 10kΩ
- R4 = 10kΩ
With these resistor values, the circuit will scale and shift the input voltage range as desired.
Learn more about amplifier circuit
brainly.com/question/29508163
#SPJ11
a random sample of 15 college soccer players were selected to investigate the relationship between heart rate and maximal oxygen uptake. the heart rate and maximal oxygen uptake were recorded for each player during a training session. a regression analysis of the data was conducted, where heart rate is the explanatory variable and maximal oxygen uptake is the response variable.
A regression analysis was conducted on heart rate and maximal oxygen uptake data for 15 college soccer players to investigate their relationship during a training session.
In the study, a random sample of 15 college soccer players were selected to investigate the relationship between heart rate and maximal oxygen uptake. Heart rate and maximal oxygen uptake were recorded for each player during a training session. A regression analysis was conducted to model the relationship between heart rate (independent variable) and maximal oxygen uptake (dependent variable). The regression equation can be used to predict maximal oxygen uptake for a given heart rate. The analysis also provides information about the strength and direction of the relationship between the two variables. This study can provide valuable insights into the relationship between heart rate and maximal oxygen uptake in college soccer players and may have implications for training and performance strategies.
Learn more about regression analysis here:
https://brainly.com/question/30011167
#SPJ11
find an equation of the line that satisfies the given conditions
The equation of a line is commonly represented as y = mx + b, where y is the dependent variable (usually representing the vertical axis), x is the independent variable (usually representing the horizontal axis), m is the slope of the line, and b is the y-intercept.
The slope (m) of a line determines its steepness or inclination. It represents the rate of change of the dependent variable (y) with respect to the independent variable (x). A positive slope indicates an upward trend, while a negative slope indicates a downward trend.
The y-intercept (b) is the point where the line intersects the y-axis. It represents the value of y when x is equal to zero. It gives us a starting point on the y-axis for the line.
By knowing the slope and y-intercept, we can substitute their values into the equation y = mx + b to obtain the specific equation of the line that satisfies the given conditions. This equation allows us to determine the value of y for any given value of x along the line.
Learn more about vertical axis here:
https://brainly.com/question/31086219
#SPJ11
a pulse of radiation propagates with velocity vector v = < 0, 0, −c >. the electric field in the pulse is vector e = < 7.7 ✕ 106, 0, 0 > n/c. what is the magnetic field in the pulse?
A pulse of radiation propagates with velocity vector v = < 0, 0, −c >. The electric field in the pulse is vector e = < 7.7 ✕ 106, 0, 0 > n/c. The magnetic field in the pulse is B = < 7.7 ✕ 106t, 0, 0 > n/c
To find the magnetic field in the pulse, we can use the Maxwell's equations:
curl(E) = -dB/dt
where E is the electric field and B is the magnetic field.
Since the electric field is given as e = < 7.7 ✕ 106, 0, 0 > n/c and the velocity vector is v = < 0, 0, −c >, we can assume that the pulse is propagating in the negative z-direction.
Therefore, we can write the electric field as:
e = < 0, 0, 7.7 ✕ 106 > n/c
Now, we can use the Maxwell's equation to find the magnetic field:
curl(E) = -dB/dt
Taking the curl of the electric field, we get:
curl(E) = < 0, -7.7 ✕ 106, 0 > n/c
Since the pulse is propagating in the negative z-direction, we can assume that the magnetic field is only in the x-direction. Therefore, we can write the magnetic field as:
B = < Bx, 0, 0 >
Now, substituting the values of curl(E) and B in Maxwell's equation, we get:
< 0, -7.7 ✕ 106, 0 > = -dBx/dt
Integrating both sides with respect to time, we get:
Bx = 7.7 ✕ 106t + C
where C is a constant of integration.
Since the magnetic field is zero at t = 0, we can assume that C = 0. Therefore, the magnetic field in the pulse is:
B = < 7.7 ✕ 106t, 0, 0 > n/c
To know more about magnetic field refer here:
https://brainly.com/question/12970526#
#SPJ11
Determine the maximum flow rate (kg/s) and corresponding pressure gradient (Pa/m) for which laminar flow would occur for water, SAE 10W oil, and glycerin. The fluids are at 20 deg. C. Draw some conclusion from your analysis.
Pressure gradient is directly proportional to the flow rate for each fluid. Fluids with higher viscosities require larger pressure gradients to achieve the same flow rates, indicating a higher resistance to flow.
To determine the maximum flow rate and corresponding pressure gradient for laminar flow, we can use the Hagen-Poiseuille equation, which relates the flow rate to the pressure gradient for viscous flow in a cylindrical pipe:
Q = (π * ΔP * [tex]r^{4}[/tex]) / (8 * μ * L),
where Q is the flow rate, ΔP is the pressure gradient, r is the radius of the pipe, μ is the dynamic viscosity of the fluid, and L is the length of the pipe.
We can rearrange this equation to solve for the pressure gradient:
ΔP = (8 * μ * Q) / (π * [tex]r^{4}[/tex] * L).
Given that the fluids are water, SAE 10W oil, and glycerin at 20°C, we can look up their respective dynamic viscosities at this temperature:
Water: μwater = 0.001 kg/(m·s)
SAE 10W oil: μoil = 0.05 kg/(m·s)
Glycerin: μglycerin = 1.49 kg/(m·s)
Let's assume a standard pipe radius of r = 1 cm (0.01 m) and a pipe length of L = 1 m for simplicity.
For water:
ΔPwater = (8 * 0.001 * Q) / (π * [tex](0.01)^{4}[/tex]* 1) = (0.0008 * Q) / (3.1416 * 0.00000001)
= 0.000255 Q.
For SAE 10W oil:
ΔPoil = (8 * 0.05 * Q) / (π * [tex](0.01)^{4}[/tex]* 1) = (0.4 * Q) / (3.1416 * 0.00000001)
= 0.0127 Q.
For glycerin:
ΔPglycerin = (8 * 1.49 * Q) / (π * [tex](0.01)^{4}[/tex]* 1) = (11.92 * Q) / (3.1416 * 0.00000001)
= 0.3793 Q.
From these equations, we can see that the pressure gradient is directly proportional to the flow rate for each fluid.
Conclusion:
Based on the analysis, we can observe the following:
1. Water has the lowest viscosity among the three fluids, resulting in the smallest pressure gradient required for laminar flow.
2. SAE 10W oil has a higher viscosity than water, requiring a larger pressure gradient for the same flow rate.
3. Glycerin has the highest viscosity, leading to the largest pressure gradient needed to maintain laminar flow.
In general, fluids with higher viscosities require larger pressure gradients to achieve the same flow rates, indicating a higher resistance to flow.
It's important to note that these calculations assume laminar flow, which occurs under certain conditions. For higher flow rates or smaller pipe sizes, the flow may transition to turbulent, and different equations would be required to analyze the flow behavior.
To know more about Pressure gradient here
https://brainly.com/question/2530102
#SPJ4
Consider a diagnostic ultrasound of frequency 5.00 MHz that is used to examine an irregularity in soft tissue. (a) What is the wavelength in air of such a sound wave if the speed of sound is 343 m/s? (b) If the speed of sound in tissue is 1800 m/s, what is the wavelength of this wave in tissue?
The wavelength of this ultrasound wave in air is 6.86 x 10^-5 m, and in tissue, it is 3.6 x 10^-4 m.
(a) To find the wavelength in air, you can use the formula: wavelength = speed of sound / frequency.
For this diagnostic ultrasound with a frequency of 5.00 MHz (which is equivalent to 5,000,000 Hz) and a speed of sound in air at 343 m/s, the calculation is as follows:
Wavelength in air = 343 m/s / 5,000,000 Hz = 6.86 x 10^-5 m
(b) To find the wavelength in tissue, use the same formula but with the speed of sound in tissue, which is 1,800 m/s:
Wavelength in tissue = 1,800 m/s / 5,000,000 Hz = 3.6 x 10^-4 m
So, the wavelength of this ultrasound wave in air is 6.86 x 10^-5 m, and in tissue, it is 3.6 x 10^-4 m.
To learn more about air, refer below:
https://brainly.com/question/19368011
#SPJ11
. a near-sighted person can only see objects clearly up to a maximum distance dmax. design a lens to correct the vision of a person for whom dmax = 37 cm.
We would need to find a concave lens with a power of -0.37 diopters and place it in front of the person's eye. This lens would diverge the incoming light rays and reduce the refractive power of the eye, allowing the light to focus correctly on the retina and correcting the person's near-sightedness.
To correct the vision of a near-sighted person with a maximum clear distance of 37 cm, we need to design a concave lens that will diverge the light rays before they enter the eye, so that they will focus correctly on the retina.
The strength of the lens required to correct the vision depends on the refractive power of the eye, which is measured in diopters. A near-sighted person has too much refractive power, which causes the light rays to focus in front of the retina, resulting in a blurry image.
To correct this, we need to add a negative lens (concave lens) in front of the eye that will reduce the total refractive power. The strength of the lens needed can be calculated using the formula:
Lens power (in diopters) = 1 / focal length (in meters)
Since the person can only see clearly up to a distance of 37 cm, the focal length of the lens needed is:
focal length = 1 / (dmax / 100) = 1 / 0.37 = 2.70 meters
Therefore, the lens power required to correct the near-sightedness is:
Lens power = 1 / focal length = 1 / 2.70 = 0.37 diopters
For more such questions on refractive power
https://brainly.com/question/25164545
#SPJ11
To correct the vision of a near-sighted person who can only see objects clearly up to a maximum distance of d max = 37 cm, a concave lens would be required.
This type of lens diverges light rays and causes them to spread out, which corrects the near-sightedness. The strength of the lens would need to be calculated based on the distance of the object that the person wants to see clearly. For example, if the person wants to see an object at a distance of 50 cm, a lens with a strength of -2.5 diopters would be needed. It is important to note that the lens can only correct vision up to a certain point, and the person may still need to wear corrective lenses for distant vision beyond their dmax.
To design a lens to correct the vision of a near-sighted person with a maximum clear distance (dmax) of 37 cm, follow these steps:
1. Identify the person's maximum clear distance: In this case, dmax = 37 cm.
2. Determine the focal length (f) needed to correct their vision: Use the formula 1/f = 1/dmax. In this case, 1/f = 1/37 cm.
3. Calculate the focal length (f): Solve the equation from step 2 to find f. In this case, f = 37 cm.
4. Choose a lens with a negative focal length: Since the person is near-sighted, you'll need a diverging lens with a negative focal length. In this case, choose a lens with a focal length of -37 cm.
To summarize, to correct the vision of a person with a dmax of 37 cm, you would need a diverging lens with a focal length of -37 cm. This lens will help the person see objects clearly at a greater distance.
Visit here to learn more about near-sighted person:
brainly.com/question/31606655
#SPJ11
a resistor with 750.0 ω is connected to the plates of a charged c
a) What is the energy initially stored in the capacitor?
b) What is the electrical power dissipated in the resistor just after the connection is made?
c) What is the electrical power dissipated in the resistor at the instant when the energy stored in the capacitor has decreased to half the value calculated in part (A)?apacitor with capacitance 4.26 μf. just before the connection is made, the charge on the capacitor is 8.60 mc.
The initial energy stored in the capacitor is [tex]9.180 \times 10^{-5[/tex] J, the electrical power dissipated in the resistor just after the connection is made is 5.435 mW, and the power dissipated in the resistor at the instant when the energy stored in the capacitor has decreased to half the initial value is 1.356 mW.
The energy initially stored in the capacitor can be calculated using the formula:
[tex]$E = \frac{1}{2}CV^2$[/tex]
where E is the energy stored in the capacitor, C is the capacitance, and V is the voltage across the capacitor.
Using the given values, we have:
[tex]$C = 4.26 \ \mu F = 4.26 \times 10^{-6} \ F$[/tex]
[tex]$V = \frac{Q}{C} = \frac{8.60 \ mC}{4.26 \ \mu F} = 2.018 \ V$[/tex]
Therefore, the initial energy stored in the capacitor is:
[tex]$E = \frac{1}{2}(4.26 \times 10^{-6} \ F)(2.018 \ V)^2 = 9.180 \times 10^{-5} \ J$[/tex]
b) The electrical power dissipated in the resistor just after the connection is made can be calculated using the formula:
[tex]$P = \frac{V^2}{R}$[/tex]
where P is the power, V is the voltage across the resistor, and R is the resistance.
Since the capacitor is fully charged before the connection is made, the voltage across the resistor is initially equal to the voltage across the capacitor, which is 2.018 V. Therefore, the power dissipated in the resistor just after the connection is made is:
[tex]$P = \frac{(2.018 \ V)^2}{750.0 \ \Omega} = 5.435 \ mW$[/tex]
c) When the energy stored in the capacitor has decreased to half the value calculated in part (a), the voltage across the capacitor will also be halved. Therefore, the voltage across the resistor at this instant will be:
V = 2.018 V / 2 = 1.009 V
Using this voltage and the resistance of the resistor, we can calculate the power dissipated in the resistor as:
[tex]$P = \frac{(1.009 \ V)^2}{750.0 \ \Omega} = 1.356 \ mW$[/tex]
Therefore, the electrical power dissipated in the resistor at the instant when the energy stored in the capacitor has decreased to half the value calculated in part (a) is 1.356 mW.
To learn more about capacitors
https://brainly.com/question/17176550
#SPJ4
(a) The energy initially stored in the capacitor is approximately 8.63 J, (b) The electrical power dissipated in the resistor just after the connection is made is approximately 5.43 W, and (c) The electrical power dissipated in the resistor when the energy stored in the capacitor is halved is approximately 2.72 W.
To answer the given questions, we'll use the formulas related to capacitors and resistors.
Given:
Resistor resistance (R) = 750.0 Ω
Capacitor capacitance (C) [tex]= 4.26 μF = 4.26 * 10^{(-6)} F[/tex]
Charge on the capacitor [tex](Q) = 8.60 mC = 8.60 * 10^{(-3)} C[/tex]
(a) To calculate the energy initially stored in the capacitor, we'll use the formula:
Energy stored in a capacitor [tex](E) = (1/2) * C * V^2[/tex],
where V is the voltage across the capacitor.
Since the capacitor is charged before the connection is made, the voltage across the capacitor is given by:
V = Q / C.
Substituting the values, we find:
[tex]V = (8.60 * 10^{(-3)} C) / (4.26 * 10^{(-6)} F).[/tex]
Calculating this expression, we find:
V ≈ 2018.69 V.
Now, we can calculate the energy stored in the capacitor:
[tex]E = (1/2) * (4.26 * 10^{(-6)} F) * (2018.69 V)^2.[/tex]
Calculating this expression, we find:
E ≈ 8.63 J (rounded to two decimal places).
Therefore, the energy initially stored in the capacitor is approximately 8.63 J.
(b) The electrical power dissipated in the resistor just after the connection is made can be calculated using the formula:
Power [tex](P) = (V^2) / R,[/tex]
where V is the voltage across the resistor.
Since the resistor is connected directly to the capacitor, the voltage across the resistor is equal to the voltage across the capacitor:
V = Q / C.
Substituting the values, we find:
[tex]V = (8.60 * 10^{(-3)} C) / (4.26 * 10^{(-6)} F).[/tex]
Calculating this expression, we find:
V ≈ 2018.69 V.
Now, we can calculate the power dissipated in the resistor:
[tex]P = (2018.69 V)^2[/tex] / 750.0 Ω.
Calculating this expression, we find:
P ≈ 5.43 W (rounded to two decimal places).
Therefore, the electrical power dissipated in the resistor just after the connection is made is approximately 5.43 W.
(c) To determine the electrical power dissipated in the resistor when the energy stored in the capacitor has decreased to half the initial value, we need to find the new voltage across the capacitor.
Since the energy stored in the capacitor is proportional to the square of the voltage, when the energy is halved, the voltage is also halved.
Therefore, the new voltage across the capacitor is:
V_new = V_initial / sqrt(2).
Substituting the initial voltage value, we find:
V_new = 2018.69 V / sqrt(2).
Calculating this expression, we find:
[tex]V_{new} = 1428.99 V[/tex] (rounded to two decimal places).
Now, we can calculate the power dissipated in the resistor:
[tex]P_{new} = (1428.99 V)^2[/tex] / 750.0 Ω.
Calculating this expression, we find:
[tex]P_{new} = 2.72 W[/tex] (rounded to two decimal places).
Therefore, the electrical power dissipated in the resistor when the energy stored in the capacitor has decreased to half the initial value is approximately 2.72 W.
To learn more about electrical power from the given link
https://brainly.com/question/28790634
#SPJ4
A current of 4. 75 A is going through a 5. 5 mH inductor is switched off. It takes 8. 47 ms for the current to stop flowing.
> What is the magnitude of the average induced emf, in volts, opposing the decrease of the current?
A current of 4.75 A is going through a 5.5 mH inductor is switched off. It takes 8.47 ms for the current to stop flowing. The average induced emf opposing the decrease of the current is approximately 26.125 volts.
To calculate the magnitude of the average induced electromotive force (emf) opposing the decrease of the current, we can use Faraday's law of electromagnetic induction.
Faraday's law states that the induced emf in an inductor is equal to the rate of change of magnetic flux through the inductor. Mathematically, it can be expressed as:
emf = -L * (di/dt)
Where:
emf is the induced emf (in volts)
L is the inductance of the inductor (in henries)
di/dt is the rate of change of current (in amperes per second)
Given:
Current (I) = 4.75 A
Inductance (L) = 5.5 mH = 5.5 x [tex]10^{-3}[/tex] H
Time (t) = 8.47 ms = 8.47 x [tex]10^{-3}[/tex]) s
To find di/dt, we need to calculate the change in current over time. Since the current is decreasing to zero, di will be the initial current minus the final current, and dt will be the time taken for the current to decrease.
Initial current (Iinitial) = 4.75 A
Final current (Ifinal) = 0 A
di = Iinitial - Ifinal = 4.75 A - 0 A = 4.75 A
dt = 8.47 x [tex]10^{-3}[/tex] s
Now we can calculate the magnitude of the average induced emf:
emf = -L * (di/dt)
= - (5.5 x [tex]10^{-3}[/tex] H) * (4.75 A / 8.47 x [tex]10^{-3}[/tex] s)
Calculating the value:
emf = - (5.5 x [tex]10^{-3}[/tex] H) * (4.75 A / 8.47 x [tex]10^{-3}[/tex] s)
= - (5.5 x [tex]10^{-3}[/tex]) H) * (4.75 A / 8.47 x [tex]10^{-3}[/tex] s)
= - (5.5 x 4.75) V
= - 26.125 V
Taking the magnitude, the average induced emf opposing the decrease of the current is approximately 26.125 volts.
To know more about average induced emf here
https://brainly.com/question/31979754
#SPJ4
explain why the distillate collected from the steam distillation of cinnamon is cloudy.
The distillate collected from the steam distillation of cinnamon is often cloudy due to the presence of essential oils and other compounds that are not completely soluble in water.
Steam distillation is a popular process for extracting essential oils and other volatile compounds from natural sources like plants and spices. Steam is fed through the cinnamon bark during steam distillation, causing the volatile chemicals to vaporise and carry over into the condenser, where they are cooled and condensed.
The condensed distillate is a mixture of water and volatile chemicals that are insoluble in water.
The distillate frequently appears hazy when collected due to the presence of minute droplets or particles of essential oils and other compounds that have not entirely dissolved in the water. Because these droplets and particles scatter light, the distillate appears cloudy.
For such more question on steam distillation:
https://brainly.com/question/19709456
#SPJ11
The distillate collected from the steam distillation of cinnamon appears cloudy due to the presence of essential oil compounds and water-soluble components in the mixture. Steam distillation is a technique used to separate and purify volatile compounds, like essential oils, from plant materials by heating and passing steam through the substance.
This process causes the volatile compounds to vaporize and mix with the steam, which then condenses back into a liquid form upon cooling.
In the case of cinnamon, the distillate obtained contains both essential oils, rich in aromatic compounds like cinnamaldehyde, and water from the steam. These two components have different polarities, with the essential oils being mostly non-polar and the water being polar. As a result, they do not mix well and form an emulsion with tiny droplets of the essential oil dispersed in the water, leading to a cloudy appearance.
To obtain a clear distillate, further separation techniques, such as using a separating funnel, can be employed to separate the essential oils from the water. This allows for the collection of a more concentrated and purified form of the cinnamon essential oil, which can then be utilized in various applications like perfumery, flavoring, and therapeutic uses.
learn more about volatile compounds here: brainly.com/question/1163824
#SPJ11
An LRC series circuit has R = 15.0 ?, L = 25.0 mH, and C = 30.0 ?F. The circuit is connected to a
120-V (rms) ac source with frequency 200 Hz.
(a) What is the impedance of the circuit?
(b) What is the rms current in the circuit?
(c) What is the rms voltage across the resistor?
(d) What is the rms voltage across the inductor?
(e) What is the rms voltage across the capacitor?
The impedance of the circuit is 14.8 ohms. The current amplitude in the circuit is 8.11 A, and the phase angle between the current and voltage in the circuit is 0.542 radians.
The impedance of an LRC series circuit is given by Z = R + j(XL - XC), where R is the resistance, XL is the inductive reactance, and XC is the capacitive reactance. The inductive and capacitive reactances are given by XL = ωL and XC = 1/(ωC), respectively. The impedance of the circuit is calculated to be 14.8 ohms. The current amplitude in the circuit is calculated using Ohm's law as I = V/Z, where V is the voltage amplitude of the source. The current amplitude is found to be 8.11 A. The phase angle between the current and voltage in the circuit is calculated using the arctan function of the ratio of the imaginary part of the impedance to the real part of the impedance. The phase angle is found to be 0.542 radians, which indicates that the current is leading the voltage in the circuit by this amount.
Learn more about impedance:
https://brainly.com/question/2263607
#SPJ11
a mass mm at the end of a spring oscillates with a frequency of 0.91 hzhz . when an additional 790 gg mass is added to mm, the frequency is 0.65 hzhz .. What is the value of m? Include appropriate units.
The value of m is approximately 166 g.
The frequency of oscillation of a mass-spring system is given by:
f = 1/2π * √(k/m)
where f is the frequency, k is the spring constant, and m is the mass.
Let's assume the spring constant remains constant.
At first, the system has a mass of m and a frequency of 0.91 Hz.
f1 = 0.91 Hz
When an additional 790 g mass is added, the system has a total mass of m + 0.79 kg and a frequency of 0.65 Hz.
f2 = 0.65 Hz
m + 0.79 kg = (m + m') where m' is the mass added
m' = 0.79 kg
Substituting the values into the frequency equation, we get:
f1 = 1/2π * √(k/m)
f2 = 1/2π * √(k/(m + m'))
Dividing the second equation by the first equation and squaring both sides:
(f2/f1)² = (m/(m + m' ))
(0.65/0.91)² = (m/(m + 0.79))
Solving for m:
m = m'/(1 - (f2/f1)²)
m = 0.79 kg / (1 - (0.65/0.91)²)
m ≈ 0.166 kg or 166 g (to three significant figures)
Therefore, the value of m is approximately 166 g.
Learn more about oscillation on:
https://brainly.com/question/12622728
#SPJ11
How would you show that RC has units of seconds if R is measured in ohms and C is measured in farads
RC has the units of seconds (s).
To show that RC has units of seconds when R is measured in ohms and C is measured in farads, you simply multiply the units of R and C together:
R (resistance) is measured in ohms (Ω)
C (capacitance) is measured in farads (F)
Now multiply these units:
RC = Ω × F
Since 1 Ω = 1 kg·m²·s⁻³·A⁻² and 1 F = 1 s⁴·A²·m⁻²·kg⁻¹, we can replace the units:
RC = (kg·m²·s⁻³·A⁻²) × (s⁴·A²·m⁻²·kg⁻¹)
Now, cancel out the common terms (kg, A, and m):
RC = s
As a result, RC has the units of seconds (s).
To learn more about resistance, refer below:
https://brainly.com/question/30799966
#SPJ11
Write a balanced nuclear reaction showing emission of a β-particles by 90_234Th. (symbol of daughter nucleus formed in the process is Pa.)
The balanced nuclear reaction showing emission of a β-particle by 90_234Th is [tex]90_2_3_4Th[/tex] → [tex]91_2_3_4P_a[/tex] [tex]+ -1_0_e[/tex]. The daughter nucleus formed in the process is Pa.
To write a balanced nuclear reaction for the emission of a β-particle (beta particle) by 90_234 Th, we need to take into account the conservation of mass and charge. In this reaction, the Th isotope undergoes beta decay, emitting an electron (β-particle) and forming a daughter nucleus with the symbol Pa. Here's the balanced nuclear reaction:
[tex]90_2_3_4Th[/tex] → [tex]91_2_3_4P_a[/tex] [tex]+ -1_0_e[/tex]
1. The Thorium (Th) isotope has an atomic number of 90 and a mass number of 234.
2. During beta decay, a neutron in the nucleus converts into a proton and emits an electron (β-particle). The emitted electron is represented as[tex]-1_0_ e.[/tex]
3. The atomic number increases by 1, becoming 91 (Pa), while the mass number remains the same (234).
So, the balanced nuclear reaction is [tex]90_2_3_4Th[/tex] → [tex]91_2_3_4P_a[/tex] [tex]+ -1_0_e[/tex]
To know more about nuclear reaction refer here :
https://brainly.com/question/8644914
#SPJ11
Which of the following statements correctly describes the change which occurs when a liquid vaporizes at its boiling point at a given external pressure?
a) The entropy decreases.
b) The temperature increases.
c) The kinetic energy increases.
d) The potential energy increases.
When a liquid vaporizes at its boiling point at a given external pressure, the correct statement that describes the change is that the kinetic energy increases. Option c.
This is because as the liquid is heated to its boiling point, the temperature remains constant until all of the liquid has vaporized. During this phase change, the energy supplied to the liquid is used to break the intermolecular forces between the liquid particles, increasing their kinetic energy and causing them to escape into the gas phase. The entropy of the system also increases, as the liquid molecules are now more disordered in the gas phase than they were in the liquid phase.
The potential energy of the system remains constant during this process, as there is no change in the distance between the particles. Therefore, the correct statement is that the kinetic energy increases when a liquid vaporizes at its boiling point at a given external pressure. Answer option c.
More on pressure: https://brainly.com/question/21039613
#SPJ11
16. when water freezes in a closed jar both its volume and its pressure increase,eventually bursting the jar. does this violate the second-order conditionpv < 0? explain.
Water freezing in a closed jar and causing it to burst does not violate the second-order condition (pv < 0). This is because when water freezes, it undergoes a phase transition from liquid to solid, causing its volume to increase due to the formation of a crystalline structure.
However, this condition does not apply to water in a closed jar when it freezes and eventually bursts the jar. This is because water is not a gas and does not behave like a gas. When water freezes, it undergoes a phase change from a liquid to a solid, which results in a decrease in volume. However, this decrease in volume is accompanied by an increase in pressure because water expands when it freezes.
In summary, the second-order condition does not apply to water in a closed jar when it freezes and eventually bursts the jar because it is not a result of adiabatic expansion or compression of a gas. Instead, it is a phase change of a liquid, which results in an increase in pressure as the volume decreases.
To know more about crystalline visit:-
https://brainly.com/question/30545056
#SPJ11