A 5. 0 kg mass and a 3. 0 kg mass are placed on top of a seesaw. The 3. 0 kg mass is 2. 00 m from the fulcrum as showa. Where should the 5. 0 kg mass be placed to keep the system from rotating?



Show work

Answers

Answer 1

A 5. 0 kg mass and a 3. 0 kg mass are placed on top of a seesaw. The 3. 0 kg mass is 2. 00 m from the fulcrum. The 5.0 kg mass should be placed 1.2 meters from the fulcrum to keep the system from rotating.

To keep the system from rotating, the torques on both sides of the fulcrum need to be balanced. Torque is calculated by multiplying the force applied by the distance from the fulcrum.

Let's denote the unknown distance from the fulcrum to the 5.0 kg mass as x.

The torque exerted by the 3.0 kg mass is given by:

[tex]Torque_3_k_g = (3.0 kg) * (9.8 m/s^2) * (2.0 m)[/tex]

The torque exerted by the 5.0 kg mass is given by:

[tex]Torque_5kg = (5.0 kg) * (9.8 m/s^2) * (x m)[/tex]

To keep the system in balance, the torques on both sides must be equal:

[tex]Torque_3kg = Torque_5kg[/tex]

Simplifying the equation:

[tex](3.0 kg) * (9.8 m/s^2) * (2.0 m) = (5.0 kg) * (9.8 m/s^2) * (x m)[/tex]

Solving for x:

(3.0 kg) * (2.0 m) = (5.0 kg) * (x m)

6.0 kg·m = 5.0 kg·x

Dividing both sides by 5.0 kg:

x = (6.0 kg·m) / (5.0 kg)

x = 1.2 m.

        Fulcrum

         |

         |

   5.0 kg | 3.0 kg

   -------|---------    

        1.2 m   2.0 m

In the diagram, the fulcrum is represented by "|". The 5.0 kg mass is placed 1.2 m from the fulcrum, while the 3.0 kg mass is placed 2.0 m from the fulcrum. This configuration ensures that the torques on both sides are balanced, preventing rotation of the system.

For more such information on: mass

https://brainly.com/question/86444

#SPJ8


Related Questions

A magnetic field is formed when electric charges move. When the electric charges stop moving, the magnetic field (which was formed by the moving charges) ceases to exist. True or False​

Answers

True

Explanation:

when electrons stop.moving it cause a stoppage

in formation of magnetic field

i hope.it helps u

Complete the sentence. Friction always ____________

a. helps the motion

b. opposes the motion

c. both of these

d. none of these

Answers

Answer:

B- Opposes the motion

Explanation:

When two object touches each other. friction acts in a opposite direction to the motion of the object

B. Opposes the motion.

A marble rolling across a flat surface will not roll forever. This is due to friction. The marble rubs against the flat surface, slowing down until it finally stops.

What is the kinetic energy of a 5kg ball that is rolling 3m/s?

Answers

Answer:

22.5

Explanation:

As the mass is 5 kg,velocity is 3m/s so the derivation use for kinetic energy is 1÷2 mv*2 . By this derivation we will find out the kinetic energy

A rocket at rest with a mass of 942 kg is acted on by an average net force of 6,731 N upwards for 21 s. What is the final velocity of the rocket?

Answers

Answer:

Final velocity, V = 150.15 m/s

Explanation:

Given the following data;

Mass = 942kg

Net force = 6,731N

Time = 21secs

To find the final velocity of the rocket;

First of all, we would determine the acceleration of the rocket with respect to time.

Force = mass * acceleration

Substituting into the equation, we have;

6,731 = 942*acceleration

Acceleration = 6731/942

Acceleration = 7.15m/s²

Now, to find the final velocity we would use the first equation of motion.

V = U + at

Since the rocket started from rest, its initial velocity (U) is zero.

V = 0 + 7.15*21

Final velocity, V = 150.15 m/s

can you suggest improvement that can be made towards the design of siphon so that the transfer of liquid is much higher.​

Answers

Answer:

A siphon is a tube that makes use of the potential energy of fluid at an elevated level to transfer the fluid to a lower level, due to pressure differences between the inlet and the outlet points of the tube, such that the pressure at the outlet is higher than the pressure at the inlet

The pressure energy is converted into velocity (kinetic) energy, and therefore, in other to increase the flow rate through the tube of a siphon, with constant diameter, the level of the fluid in the container at the inlet (supply) of the siphon is raised higher than the level at the outlet receiving) container or the outlet point of the siphon tube

The larger the difference between the inlet and outlet levels, the faster the transfer of fluid by the siphon

Explanation:

Help please if u don’t know one don’t answer it but do the most that u can

Answers

(2) 120 * 0.4 = 48 W

(3) 500 / 2 = 250 V

(4) 1000 / 300 = 3.3 A

(5) 700/3 = 233.3 V

(6) 1600 / 240 = 6.7 A

(7) 160 / 2 = 80 V

(8) 120 * 6 = 720 W

(9) 1000 / 240 = 4.17 A

Power (watts) = electric potential difference(volts) * intensity(amps)

Pls , give me Brainliest pls pls pls pls

Answer:

1. 1689 v 259 v p=v 1* + 8.3 answer 2090

solve: A car travels 2 km North , 10 km East, then 3 km West. pythagorean theorem

Answers

________b_____ 7 km east

|

| 2km north.

|a

|

°

pythagorean theorem : ✓a² + b² = c²

c² = a² + b² = 4 + 49 = 53

c = ✓53 km

displacement = c = ✓53 km

distance = 10 + 3 + 2 = 15 km

What determines a wave’s velocity? a The number of waves per a period of time. b The amplitude of the wave. c The medium it travels through. d How much constructive interference there is.

Answers

Answer:

A

Explanation:

I'm pretty sure that this answer is correct please let me know!

This tasty snack starts as a kernel and is “popped” then
covered in salt, butter, caramel, peanuts, you name it.
Through thermal energy we've learned to heat things, you
could use conduction, convection and/or radiation. Describe
1 cooking option in detail including whether it is convection,
conduction or radiation. Must be at least 2 sentences.

Answers

Popcorn can be popped by either of the three forms of heat transfer:

Conduction in a pan with hot oil on a stove element.

Convection by an air popper and warm air rising over a heating element... no direct contact with heat source.

Radiation is what occurs in a microwave. Invisible radiant heat activates water molecules in the popcorn.

All the above heat the kernel over 100 Celsius. Water vaporizes/boils (latent heat) and erupts through the kernel.

Mmmm popcorn watch out for the lipids (fat in the oil and butter)

which is not a cinstellation?​

Answers

Answer:

The Big Dipper

Explanation:

plzz helpppp meee!!!!

A farmer cannot get his cow to move without help. The cow has a mass of 425 kg. He returns with some neighbors, and they are able to exert a net force of 900 N on the cow. What is its acceleration?​

Answers

A=f/m
A=900/425
A=2.18

To determine acceleration you divide the force by the mass.

Answer:

hhh

Explanation:

How many total molecules are present in the formula below
2H2O

Answers

There are 4 in there I believe

I'm guessing 6.

the coefficient of two turns our hydrogen into 4 and our oxygen into 2 which makes a total of 6 molecules.

someone please helppp

Answers

okay, so what i have learned from my experiences with doing school on e.d.g.e.n.u.i.t.y (they won't let me say the website name on here lol) is that after you write an extended response, they show you a sample response as well as these checkboxes which show things they wanted you to have included in your answer. ideally they want you to select all of them, meaning that all of those elements were included in your answer. it's not a matter or right or wrong; none of those checkboxes contain a wrong answer. you just select the ones that apply to your answer, and you won't get penalized if you don't select all of the checkboxes. you don't even have to select any of them. there's been times where my answer has been not at all what it should've been and i just click done without checking any of those boxes because i did not include any of those elements in my response. as long as the box that you wrote your answer in is outlined in green (which yours is, and that means that the computer likes your answer), you will be fine.

i hope this makes sense! it's sort of hard to explain. if you have any questions, just comment and i'll try my best to explain better lol. have a great rest of your day! <3

A force of 10 N acts to the left and a force of 5 N acts to the right on an object of mass 1 kg. If its initial speed is zero , what is its velocity after 1 second ?

Answers

Answer: -5 m/s

Explanation:

First find the net force by summing up the forces:

-10N + 5N = -5N

Use Newton's Second Law of motion to solve for the acceleration:

F = ma

-5N = 1kg(a)

a = -5 m/s^2

Use the first kinematic equation to solve for the final velocity:

Vf = Vi + at

Vf = 0 + (-5)(1)

Vf = -5 m/s

A plane has a take off speed of 1 point
300 km/h. What is the
acceleration in m/s2 of the
plane if the plane started from
rest and took 45 seconds to
take off? *​

Answers

Answer:

Acceleration = 1.85m/s²

Explanation:

Given the following data;

Final velocity = 300km/h to m/s = 300*1000/3600 = 83.33m/s

Time = 45 seconds

Since the plane started from rest, initial velocity is equal to 0m/s.

To find the acceleration;

In physics, acceleration can be defined as the rate of change of the velocity of an object with respect to time.

This simply means that, acceleration is given by the subtraction of initial velocity from the final velocity all over time.

Mathematically, acceleration is given by the equation;

[tex]Acceleration (a) = \frac{final \; velocity - initial \; velocity}{time}[/tex]

Where,

a is acceleration measured in [tex]ms^{-2}[/tex]

v and u is final and initial velocity respectively, measured in [tex]ms^{-1}[/tex]

t is time measured in seconds.

Substituting into the equation, we have;

Acceleration = (83.33 - 0)/45

Acceleration = 83.33/45

Acceleration = 1.85m/s²

Therefore, the acceleration of the plane is 1.85m/s².

please please help!!!!!

Answers

All resistors are in series
Therefore R=r1+r2+r3
=1+5+2=8 ohm
V=16v

Therefore V=IR
I=V/R
=16/8=2A
Current=2A

the organelles are giving their job description to you can you identify which organelle are they? write your answers in your answer sheet.
1. Hi! My responsibility is to add stability and protection to plant cells. What am I?
2. Hi! produce proteins inside the cell. What am I ?
3. Hello! I have a green pigment called the clorophyll. I also absorb solar energy to do the process of photosynthesis. What am I?
4. Good morning po! my work is to store food materials and excretes waste materials. I take a large space on plants. I make the leaves of plants fresh. what am i?
5. Hi! All organelles are embedded in me. I am a "jelly- like" substance. What am I?
Please real answer ​

Answers

1. cell wall?

2. ribosomes?

3. chloroplast

4. vacuoles

5. cytoplasm

what are common in the pictures?​

Answers

Answer:

the flowers the left have them on there heads the middle on there chest and the right one has them on there shoulders

What is the direction of the current in the loop as the north pole of the magnet is pulled away (to the right) from the loop of wire. Answer as you face the loop from the magnet.

Answers

Answer:

Explanation:

Applying Fleming's right hand rule, the induced current would flow in a clockwise direction in the loop. Explanation: Current, magnetic field and motion are mutually dependent and perpendicular to one another.Aug 27, 2019

A tractor pulls a 1,000 kg wagon with a force of 4,000N. What is the wagon’s acceleration in m/s2? *

Answers

Answer:

4m/s^2

Explanation:

acceleration=force/mass

therefore a=4000/1000

=4m/s^2

Electrical energy in motion is what type of energy ?

Answers

Answer:

kinetic energy

Explanation:

Electrical energy is a type of kinetic energy caused by moving electric charges. The amount of energy depends on the speed of the charges – the faster they move, the more electrical energy they carry.

It’s Kinetic energy

Given the following situation of marble in motion on rolling 10 m/s horizontally from a height of 1.5-m with negligible friction.
a.) Once the ball leaves the table, calculate how long it will take for the ball to hit the floor?
b.) How far will the ball travel horizontally before hitting the floor?

Answers

Answer:

The ball would hit the floor approximately [tex]0.55\; \rm s[/tex] after leaving the table.

The ball would travel approximately [tex]5.5\; \rm m[/tex] horizontally after leaving the table.

(Assumption: [tex]g = 9.81\; \rm m \cdot s^{-2}[/tex].)

Explanation:

Let [tex]\Delta h[/tex] denote the change to the height of the ball. Let [tex]t[/tex] denote the time (in seconds) it took for the ball to hit the floor after leaving the table. Let [tex]v_0(\text{vertical})[/tex] denote the initial vertical velocity of this ball.

If the air resistance on this ball is indeed negligible:[tex]\displaystyle \Delta h = -\frac{1}{2}\, g\, t^{2} + v_0(\text{vertical}) \cdot t[/tex].

The ball was initially travelling horizontally. In other words, before leaving the table, the vertical velocity of the ball was [tex]v_0(\text{vertical}) = 0 \; \rm m \cdot s^{-1}[/tex].

The height of the table was [tex]1.5\; \rm m[/tex]. Therefore, after hitting the floor, the ball would be [tex]1.5\; \rm m \![/tex] below where it was before leaving the table. Hence, [tex]\Delta h = -1.5\;\rm m[/tex].

The equation becomes:

[tex]\displaystyle -1.5 = -\frac{9.81}{2} \, t^{2}[/tex].

Solve for [tex]t[/tex]:

[tex]\displaystyle t = \sqrt{1.5 \times \frac{2}{9.81}} \approx 0.55[/tex].

In other words, it would take approximately [tex]0.55\; \rm s[/tex] for the ball to hit the floor after leaving the table.

Since the air resistance on the ball is negligible, the horizontal velocity of this ball would be constant (at [tex]v(\text{horizontal}) =10\; \rm m \cdot s^{-1}[/tex]) until the ball hits the floor.

The ball was in the air for approximately [tex]t = 0.55\; \rm s[/tex] and would have travelled approximately [tex]v(\text{horizontal})\cdot t \approx 5.5\;\rm m[/tex] horizontally during the flight.

the force required to lift a load of 800 Newton by using a Lever having a mechanical advantage of 1.6 is​

Answers

Answer:force required to lift the load = 500N

Explanation:

Mechanical advantage for a lever is given by the formulae

= force output/force input

or

Mechanical Advantage = Load / Effort

where

Force output  / Load= 800 N

mechanical advantage = 1.6

Force input / Effort =??

Force input=  Force output /Mechanical advantage

= 800N / 1.6

=500N

OR

Effort = Load/ Mechanical Advantage = 800/ 1.6 = 500N

How does the composition of a comet compare with that of the Sun?
Both objects are composed of gas.


Both objects contain a form of water.


Comets are made of ice and dust, while the Sun is made of gas.


Comets are made of frozen rock, while the Sun is made of burning rock.

Answers

Answer:

C

Explanation:

The composition of a comet compared with that of the Sun is C "Comets are made of ice and dust, while the Sun is made of gas".

What are comets?

Comets are small, icy bodies that originate from the outer solar system and are composed mainly of frozen water, carbon dioxide, methane, and ammonia, along with dust and small rocky particles. When a comet approaches the Sun, its icy material vaporizes, creating a glowing coma (a hazy atmosphere around the nucleus) and a tail that points away from the Sun due to the solar wind.

On the other hand, the Sun is a giant ball of hot, glowing gas, composed mainly of hydrogen (about 73% of its mass) and helium (about 25% of its mass), with trace amounts of other elements like oxygen, carbon, and iron. The Sun generates energy through nuclear fusion reactions in its core, which convert hydrogen into helium and release a tremendous amount of energy in the process.

Therefore, the composition of a comet is quite different from that of the Sun. While both objects contain some water (in the form of ice for comets and vapor for the Sun), comets are predominantly made of ice and dust, while the Sun is predominantly made of gas, with only a small amount of solid material in its core.

Learn more about the comet here:

https://brainly.com/question/12443607

#SPJ6

how do I write an essay on how I feel about online school​

Answers

Answer:

Some students appreciated the social aspect of Zoom classrooms, while others felt online education worked best for them when they were working on their own. ... Students said they appreciated having a well-planned work week and didn't appreciate “surprise” assignments online any more than they appreciate them in class

Explanation:

What's I know I said

What do you u write it

A rock with a mass of 80grams dropped into a graduated cylinder with 30 ml of water in it the readingof water became 70 ml what is the density of the rock

Answers

Explanation:

[tex]b = m \div v \\ 80 \div 30 \times 10 { -}^{2} [/tex]

percent of Earth's surface is made up of Oxygen.
a) 30
b) 46
c) 62

Answers

Answer: it's made up about 21% so if you do not have this option I say go with 30

Explanation:

Importance of Forest ​

Answers

Answer:

to help keep fresh air

Explanation:

To produce oxygen and protect oxygen

How are the sun and Earth's moon different?(2 points)
The sun is a ball of gases that revolves around Earth, while the moon is the center of the solar system,
The sun is a ball of rock and gas, while the moon is a ball of rock that revolves around the sun.
The sun is the center of the solar system, while the moon is a ball of rock that revolves around Earth
The moon is the center of the solar system, while the sun is the center of the Milky Way.

Answers

Answer: The Sun measures 1.4 million km across, while the Moon is a mere 3,474 km across. In other words, the Sun is roughly 400 times larger than the Moon. But the Sun also happens to be 400 times further away than the Moon, and this has created an amazing coincidence.

Explanation:

Which of the following have the most GPE. 1.) a car at the top of a hill 2.) a car at the bottom of the hill 3.) a car half way down the hill 4.) on the straight part of the track. (I don't know how to give Brainly)

Answers

Answer: car at the top of a hill

Explanation:

Other Questions
It takes 45 N of effort force to move a resistance of 180 N. The Mechanical Advantage is _______ Based on the number of claims filed, a homeowners insurance company periodically reevaluates its premiums. It will either increase or decrease its premiums for all customers. Which measure provides the best information for its reevaluation?A. claims per sub-divisionB. claims per yearC. claims per year per cityD. claims per dollar value of property A spaceship passes you at a speed of 0.900c. You measure its length to be 35.2m . How long would it be when at rest?Express your answer with the appropriate units. What is the primary motivation behind using accessors? To allow the friend functions access to the class. To allow the class to be made const. To allow data members to be kept private. To allow const member functions to be changed. None of the above. At Shake Shack in Center City, the delivery truck was unable to drop off the usualorder. The restaurant was stuck selling ONLY burgers and fries all Saturday long. 850items were sold on Saturday. Each burger was $5. 79 and each order of fries was$2. 99 for a grand total of $4,019. 90 revenue on Saturday. How many burgers andhow many orders of fries were sold? How has the world community responded to human rights abuses toward children?It guaranteed education to all children.It made efforts to draw attention to child slavery.It ended the practice of child labor.It passed international laws to prevent the use of child combatants. What is the equivalence point volume, in milliliters, for titration of 40.3 mL of 0.15 M HCIO, with a sample of 0.35 M NaOH? Loss of heterozygosity Applies when a cell with one functional copy of a tumor suppressor allele undergoes deletion of that functional aleleO Applies when a cell with one functional copy of a tumor suppressor allele incurs a loss of function mis sense mutation of that functional aleleO Applies when a cell with one functional copy of a tumor suppressor allele undergoes aberrant CPG methylation of the promoter of that functiona aleleO Applies when a cell with one gain of function mutation in a proto-oncogene incurs another gain of function mutation in the remaining functional aleleO Applies when a cell with one loss-of-function mutation in a proto-oncogene incurs another loss-of-function mutation in the remaining functional aleleO Applies specifically to tumor suppressor genes. O Applies to both tumor suppressor genes and proto-oncogenes. what is the re-order point inventory level that ray needs to re-order and stock up the bike? Cash outflows generated by capital investments include all of the following except: Multiple Choice initial investment in the capital asset. increase in operating expenses increase in the amount of required working capital. annual depreciation of the capital asset. if the rate law for the reaction 2a 3b products is first order in a and second order in b, then the rate law is rate = ____. A) k[A][B]B) k[A]2[B]3C) k[A][B]2D) k[A]2[B] E) k[A]2[B]2 suppose that a firm in a competitive market has the following cost curves: e firm should exit if the market price is _____ give a recursive definition of the sequence {an}, n = 1, 2, 3, ... if (a) an= 4n 2 (b) an= 1 (1)^n (c) an= n(n+1) (d) an= n^2 what is your understanding of the ""bystander"" approach? explain an incident you have witnessed or participated in that demonstrates the ""bystander"" approach mentioned in this video. Manipulation of Gaussian Random Variables. Consider a Gaussian random variable rN(, 2r), where I E R". Furthermore, we have y = A +b+. where y E RE. A E REXD, ERF, and w N(0, ) is indepen- dent Gaussian noise. "Independent" implies that and w are independent random variables and that is diagonal. n. Write down the likelihood pyar). b. The distribution p(w) - Spy)pudar is Gaussian. Compute the mean and the covariance . Derive your result in detail. The fundamental of an organ pipe that is closed at one end and open at the other end is 265.6Hz (middle C). The second harmonic of an organ pipe that is open at both ends has the same frequency.A)What is the length of the pipe that is closed at one end and open at the other end?B)What is the length of the pipe that is that is open at both ends? A uniform sign is supported by two red pins, each the same distance to the sign's center. Find the magnitude of the force exerted by pin 2 if M = 32 kg, H = 1.3 m, d = 2 m, and h = 0.9 m. Assume each pin's reaction force has a vertical component equal to half the sign's weight. The four Vs of big data as reviewed in class include the following Vs except for:a. Velocity-analysis of streaming datab. Veracity-uncertainty of datac. Variety-different forms of datad. Voice-qualitative data integration 5) Define your variables before writing a system of equations and solving:A local store sells roses and carnations. Roses cost $25 per dozen flowers and carnations cost$10 per dozen. Last weeks sales totaled $ 6,020. 00 and they sold 380 dozens of flowers. Howmany dozens of each type of flower were sold? How does Streptococcus pneumoniae avoid the immune defenses of the lung?-The microbe walls itself off from the lung tissue, effectively hiding from defensive cells.-The infection stops the mucociliary ladder preventing physical removal.-The bacterium has a thick polysaccharide capsule inhibiting phagocytosis by alveolar macrophages.-The pathogen hides in the phagolysosome, tolerating the conditions there.