a 40 n box is pulled up ramp at a constant speed. the ramp makes and angle of 37° to the horizontal. when the box has traveled 5 m, how much work will have been done by gravity?

The typical speed for the whole excursion is 83.24 km/h. To calculate the speed we have to calculate the distance and time.

To work out the normal speed of the whole excursion, you really want to decide the all out distance voyaged and partition that by the all out time spent driving.

Distance went at each speed:

a. 50.0 km/h for 10.0 min = 50.0 km/h * (10.0 min/60.0 min) = 8.33 km

b. 100.0 km/h for 19.0 min = 100.0 km/h * (19.0 min/60.0 min) = 31.67 km

c. 55.0 km/h for 60.0 min = 55.0 km/h * (60.0 min/60.0 min) = 55.0 km

Complete distance voyaged: 8.33 km + 31.67 km + 55.0 km = 95.0 km

Complete time spent driving: 10.0 min + 19.0 min + 60.0 min = 89.0 min

Normal speed: Complete distance voyaged/All out time spent driving = 95.0 km/(89.0 min/60.0 min) = 83.24 km/h

The units of speed and time should be reliable all through the estimation. For this situation, both speed and time are communicated in SI units (km/h and minutes, separately).

To learn more about distance and speed, refer:

https://brainly.com/question/15129204

#SPJ4

Answer:

The answer is: B.it becomes more expensive to hold money as cash

When interest rates rise, the amount of revenue that you can make when making investments would also rise.

This mean that if you choose to hold your money as cash, you would lose all of the potential earning that you might obtain from turning that money into investments. This make your cash has less monetary value compared to investments.

Explanation:

By the help of  static electricity To move the negative charges from the truck to the ground and avoid a fire

The tyres on trucks hauling gasoline and other hazardous substances are engineered to be electrically conductive to prevent static electricity from building up and burning. As the truck moves further, the static electricity created by the tyres' friction with the ground may build up. If static electricity reaches a particular point, it might spark and explode. An explosion is avoided thanks to the tyres' electrical conductivity, which enables the static energy to be dispersed into the ground before it can build up to a harmful level. People transporting combustible materials are safer because the risk of an explosion is lower is drastically decreased by making the tyres conductive.

To learn more about Static Electricity

brainly.com/question/12791045

#SPJ4

Explanation:

The volume charge density, p, is the amount of charge per unit volume of charged object. To calculate the volume charge density of a sphere, you would need to know the total charge on the sphere and the volume of the sphere. Without knowing these values, it is not possible to determine the volume charge density of the sphere.

Charge density per volume is equal to A(Rr) for a sphere with radius R Charge density

The object's capacity is another name for it. The charge every unit volume of a charged item is expressed as p, or volume charge density. You would require to know the sphere's volume and total charge in order to compute the cubic charge density of the sphere.

The length, breadth, and height are multiplied by the volume formula. The good news for a cubic is that each of these measures has exactly the same measurement. The length of the any side can therefore be multiplied by three.

To know more about charge   visit:

https://brainly.com/question/18750504

#SPJ4

28 Inches is 2.33 Feet

What does the measuring unit foot mean?

"Feet" is the plural form of the single unit of measurement known as "foot." The symbol for foot or feet is, and the abbreviation is ft. One foot-long bags, for instance, can be written as either 1 ft or 1'.

Simply measure the length in inches, multiply the result by 12, and then you will have the conversion to feet. The linear footage is the resultant number. Height and width are unimportant for this dimension.

1 inch equals 2.54 cm or 0.0254 m.

1 ft. = 12 in. = 0.3048 m

1 foot equals 12 inches, 28 inches will be  2.33333 feet (ft).

To know more about measurements use link below:

https://brainly.com/question/563337

#SPJ4

Simple diffusion of a molecule down its concentration gradient requires an input of energy to the system is false.

Diffusion is a type of molecule movement down its concentration from a higher concentration to a lower concentration. Because of that, it doesn’t require the energy (ATP) from respiration. The molecule only uses kinetic energy. Based on these characteristics, diffusion is included in passive transport.

Diffusion can either be simple diffusion or be facilitated by another molecule. Simple diffusion is the movement of molecules along their concentration gradient without the direct involvement of any other molecules, while facilitated diffusion is the transport of molecules via a protein membrane.

Thus, simple diffusion doesn’t need energy for regulating the molecule passing through the membrane.

Learn more about simple diffusion by clicking this link :

https://brainly.com/question/13064441

#SPJ4

Enthalpy of formation of a substance is defined as the change in enthalpy when one mole of a substance is formed from its constituent elements in their standard states. In the case of vacancies in pure copper, the enthalpy of formation is given as 86.9 kJ/mol.

The fraction of sites vacant at a certain temperature can be determined using the Boltzmann distribution law, which states that the fraction of particles in a system with energy E is proportional to e^(-E/kT), where k is the Boltzmann constant and T is the temperature in kelvin.

To find the fraction of vacant sites, we need to calculate the energy required for a vacancy to form, which is given by the enthalpy of formation. We can then use this energy in the Boltzmann distribution equation to find the fraction of sites that are vacant at a given temperature.

At 1084°C, the temperature in kelvin can be calculated as 1084°C + 273.15 = 1357.15 K. Substituting this value and the enthalpy of formation into the Boltzmann distribution equation gives us the fraction of sites that are vacant.

However, this calculation is only a rough estimate and real systems are more complex. Factors such as the presence of impurities, lattice defects, and external influences can affect the fraction of vacant sites and cannot be accounted for by this simple calculation.

Here you can learn more about enthalpy of formation

https://brainly.com/question/28302300#

#SPJ11

The velocity with which the sandbag strikes the ground is  -28.44m/s (downward).

Given the initial velocity of balloon (u) = 5m/s

The height of balloon (h) = 40m

The acceleration is due to the gravity = g = 9.8m/s^2 acting downwards.

A sandbag is released from height h of the balloon.

The velocity of sandbag as it reaches the ground = v

We know that from Newtons laws of motion v = u + at

We know that the bag strikes the ground at y =0m,

then y = h + ut - 1/2gt^2

0 = 40 + 5t - 1/2 x 9.8 x t^2

t = 3.41s

As we know that v = u - gt

v = 5 - 9.8 x 3.41 = -28.44m/s

To learn more about velocity click here https://brainly.com/question/28738284

#SPJ4

complete question: A hot-air balloonist, rising vertically with a constant velocity of magnitude 5.00m/s releases a sandbag at an instant when the balloon is 40.0m above the ground. With what magnitude of velocity does it strike the ground?

The two cubes have different inertias. The cubes are connected to each other by a spring, and a hammer strikes them in the two ways.

Then, b) the center of mass of the system will move with the same velocity in either case.

The center of mass of an object can be known when the difference is thrown, so there will be a point of the object whose motion is like a parabola. For example, if a base ball bat is thrown, the whole point will move. There is a point whose motion is like the motion of a particle, namely parabolic motion. The tip of the beater, which was initially at the bottom when it was at the peak of the movement, was at the bottom.

The tip rotates. But there is a point on the bat that moves like a particle. This point is called the center of mass.

Learn more about center of mass at https://brainly.com/question/29576405.

#SPJ4

The flux density in the air gap of the magnetic system from Example 1.1 can be calculated using the equation B = μ₀N/l, where μ₀ is the permeability of free space (4π × 10⁻⁷ H/m), N is the number of turns in the coil, and l is the length of the air gap.

Using this equation, the flux density in the air gap when the coil current is 4 amps and each air gap length is 1 mm is 0.1 Wb/m².

The flux density in an air gap is determined by the strength of the magnetic field and the size of the air gap. The magnetic field strength is determined by the number of turns in the coil , the current flowing through the coil, and the permeability of the material that the coil is wound around.

Learn more about The flux density:

https://brainly.com/question/16234377

#SPJ4

We say that light is an electromagnetic wave because it is an oscillation of electric and magnetic fields. The relationship between wavelength, frequency and velocity of light is ν = c/λ.

What's in an Electromagnetic Wave?

When an electric field combines with a magnetic field, an electromagnetic wave is produced. The magnetic and electric fields of an electromagnetic wave are perpendicular to each other and perpendicular to the wave direction.

Light is also a combination of oscillating electric and magnetic fields perpendicular to each other, with wave propagation perpendicular to both fields. Because light is produced by accelerating charged particles (photons), according to the laws of electromagnetism, light is an electromagnetic wave.

Therefore, We say that light is an electromagnetic wave because it is an oscillation of electric and magnetic fields. The relationship (c) between wavelength, frequency and velocity of light is ν = c/λ.

To learn more about Electromagnetic Wave, click on the given link: https://brainly.com/question/25847009

#SPJ4

The minimum constant acceleration required for the aircraft to be airborne after a takeoff run of 230 m is 10.9 m/s^2.

We can use the kinematic equation to find the minimum constant acceleration required for the aircraft to be airborne after a takeoff run of 230 m.

The kinematic equation is given by:

v^2 = u^2 + 2as

where

v = final velocity (takeoff velocity)

u = initial velocity (0 m/s, since the aircraft starts from rest)

a = acceleration

s = displacement (230 m)

Since the final velocity of the aircraft must be sufficient to be airborne, we can assume it to be the minimum takeoff velocity, which is typically around 50 m/s.

Substituting the values in the equation, we get:

50^2 = 0^2 + 2as

2500 = 2as

a = 2500 / 2s

a = 2500 / 2 * 230

a = approximately 10.9 m/s^2

So, the minimum constant acceleration required for the aircraft to be airborne after a takeoff run of 230 m is approximately 10.9 m/s^2.

Learn more about acceleration here: brainly.com/question/12550364

#SPJ4

Height of cliff where a diver jumps  is 36.9m and from base the diver will be out by 3.6m distance.

The distance of a point from the y-pivot is called its x-direction, or abscissa. The distance of a point from the x-hub is called its y-direction, or ordinate. The directions of a point on the x-hub are of the structure (x, 0), and of a point on the y-hub are of the structure (0, y).

For calculating distance in horizontal direction (in positive x-axis),we need to use second equation of motion which is given by the formula

S=ut + (1/2)at²

In x-direction acceleration in x-direction=0m/sec²

So, value of a=0m/sec²

Value of u=1.6m/sec, t=3.0sec

=>S=1.6 ×3=3.8m

Similarly, for calculating distance in vertical direction (in positive x-axis),we need to use second equation of motion which is given by the formula

S=ut+ (1/2)at²

In y-direction,acceleration is 9.8m/sec²

Also,in y-direction initial velocity(u) is 0m/sec.

=>S=0×t + (1/2)×9.8×(3.0)²

=>S=0+4.9×9

=>S=36.9m

Hence,height is 36.9m and distance in horizontal direction is 3.8m

To know more about distance, visit here:

https://brainly.com/question/28354920

#SPJ4

0.0520421 ounces in 500 ml .

What is volume ?

Volume is a measure of the amount  of space occupied by an object or a substance. It is a scalar quantity and is expressed in units such as cubic meters, cubic centimeters, liters, or gallons. Volume is an important physical quantity that is used to describe the size of objects and the amount of a substance contained  within a container.

In mathematics, volume is often used to describe the amount of space enclosed by a three-dimensional object, such as a cube, sphere, or cylinder. The formula for the volume of a three-dimensional object depends on its shape, but common formulas include the volume of a cube (V = s^3), the volume of a sphere (V = 4/3 π r^3), and the volume of a cylinder (V = π r^2 h).

To know more about Volume ,  click the link below ;

https://brainly.com/question/463363

#SPJ4

Whenever the net force on an object is zero, its acceleration is zero.Whenever the net force on an object is zero, its acceleration is zero. This means that the object is either at rest or moving at a constant velocity.

The net force on an object can be determined by summing up all the individual forces acting on it, and if the net force is zero, then the object is in a state of balanced forces, which results in a constant velocity or no acceleration. It is important to note that an object can still be in motion even if the net force on it is zero, as long as it is moving at a constant velocity.

Find more about Acceleration

brainly.com/question/13324407

#SPJ4

After the dark wand touched the basket, The basket took on a negative charge, the charge was decreased. The dark wand stole electrons from the pail since it had a negative charge.

Charge is a fundamental property of matter that describes the electrical interaction between objects. It is a scalar quantity with units of Coulombs (C) in the SI system. There are two types of charges: positive and negative.

Positive charges have more protons than electrons and are attracted to negative charges. Negative charges have more electrons than protons and are attracted to positive charges. Objects with the same charge will repel each other.

Charge is conserved, meaning that the total charge in a system remains constant, even though the charge distribution can change. This is known as the law of conservation of charge.

Therefore, After the dark wand touched the basket, The basket took on a negative charge, and the charge was decreased. The dark wand stole electrons from the pail since it had a negative charge.

To know more about charge refer to:

brainly.com/question/11944606

#SPJ4

Star A is thus (3.24^4 = 51.2) times brighter than star B.

In physics, brightness is the subjective visual feeling associated with the intensity of light emerging from a surface or a point source (see luminous intensity). Luminance is a quantitative and measurable property. Whereas brightness cannot be measured scientifically, it can only be sensed. We can tell if a light source is bright or dim, therefore brightness is the visual sense that alerts us to changes in luminance.

Here,

The relationship between temperature and brightness in stars is described by the Stefan-Boltzmann law, which states that the total energy emitted by a star per unit time (its luminosity) is proportional to the fourth power of its temperature.

L ∝ T^4

where L is the luminosity and T is the temperature.

If star A is 3.2 times hotter than star B, then its temperature is 3.2 times higher:

T_A = 3.2 T_B

So, its luminosity is proportional to the fourth power of its temperature:

L_A ∝ T_A^4 = (3.2 T_B)^4 = 3.2^4 T_B^4 = 3.2^4 L_B

Therefore, star A is (3.2^4 = 51.2) times brighter than star B.

To know more about brightness,

https://brainly.com/question/9739905

#SPJ4

It was spot on. 2.54 / 10.16 cm = 4 in C.

What is Length ?

Length is a term used to describe the distance between two points on an object or the dimension of an object along a particular axis.  Length is usually measured in units of distance, such as meters, centimeters, inches, or feet.

In physics, length is an important concept used to describe the size of objects, the distance between two points, or the dimensions of a space. In engineering and construction, length is used to design and build structures, such as bridges and buildings, to ensure they are safe and fit for their intended purpose.

To know more about Length , click the given link below ;

https://brainly.com/question/2217700

#SPJ1

A) Yes, the Great Plains were formed from the sediments from the Mississippi River.

The rock of the Great Plains is sedimentary rock and the rock of the Rocky Mountains is igneous rock. They formed in different ways so they must not have formed together.

The Great Plains (Great American Desert) is a plain in North America that stretches from the Rocky Mountains, Canada to Mexico. It is bordered by the Rio Grande to the south, the Mackenzie River delta to the north, Canada to the east and the Rocky Mountains to the west.

This plain is a rocky, sandy area and is very short of water because it has a high evaporation rate. The Great Plains are about 3,000 miles (4,800 kilometers) long, 300–700 miles wide and about 1,125,000 square kilometers (2,900,000 square kilometers), about the equivalent of one third of the area of the United States.

Learn more about Great plains at https://brainly.com/question/20530869.

#SPJ4

The method employed in this experiment is the method of limits.

The method of limits is a psychophysical technique in which the stimulus intensity is graduhttps://brainly.com/question/28500977?referrer=searchResultsally increased or decreased until the subject's response changes. In the case of the "Relative Misalignment" experiment, the stimulus intensity (the degree of misalignment) is gradually increased until the subject perceives a change in the strength of the stimulus. The method of limits is used to determine the threshold of perception, or the point at which the subject can detect a change in the stimulus. In this way, the method of limits can be used to measure the sensitivity of the subject's sensory system to changes in the stimulus.

Here you can learn more about the method of limits

https://brainly.com/question/28500977#

#SPJ11

The final velocity of the ball is  117.6 m/s.

The first thing that we would need to know is the height of the building and we know that the height of the building that we are dealing with here is 1250 feet of we say that the height is 381 m.

We can now say that;

v= u + gt

It then follows that;

s = distance

u = initial velocity

g = acceleration due to gravity

t = time taken

Then we have that it was dropped from a height

Thus;

v^2 = 2gh

v = √2 * 9.8 * 381

v = 9.8 * 12

v =  117.6 m/s

Learn more about velocity:https://brainly.com/question/18084516

#SPJ1

No, it is not true that the speed of the object is equal to zero. Hence, it is impossible for an object to have zero speed and non-zero velocity.

Since distance is also a scalar, it will not be negative even if we move in the opposite direction. It never stops adding, regardless of the direction. Therefore, a moving body's total travel distance cannot be zero. Therefore, the total average speed cannot be zero, and if the body is moving, it will be nonzero.

In meters per second, speed is the rate at which an object changes position. For instance, if an object moves three meters in three seconds from its origin, its speed is one meter per second. The formula for speed is straightforward: time divided by distance.

Learn more about speed:

brainly.com/question/6504879

#SPJ4

where T is the temperature change from 10°C to 32°C, q is the rate of heat transfer, m is the mass flow rate of water, c is the heat capacity of water, and m is the mass flow rate of water. The water flow rate in kg/s

The amount of fluid that passes through a pipe or container in one unit of time is referred to as the flow rate. It is often expressed in terms of volume per unit time, such as gallons per minute or cubic metres per second. The viscosity of the fluid, the pipe's diameter, the fluid's pressure, and the length of the pipe are some of the variables that might affect flow rate. In many applications, including water treatment, industrial operations, and energy generation, it is crucial to comprehend and manage flow rate. An improper flow rate can result in waste, inefficiencies, and even equipment

Learn more about flow rate here:

https://brainly.com/question/27880305

#SPJ4

A device that automatically records temperature changes is called a thermograph. An instrument used to gauge heat or temperature is a thermometer. thermophile.

A bulb is present, and it is either liquid or gaseous. This is found inside the sensing end of the probe. When the gas expands or the liquid heats up, the attached rod pushes the needle to the temperature being measured.

When the temperature reaches a certain level, a temperature gauge will automatically control the temperature or activate a gadget. Hence, it has the ability to maintain a constant temperature in an oven or a water bath.

To know more about thermograph visit:

brainly.com/question/15300315

#SPJ4

The fundamental unit of weight in the measuring units is the kilogram, or kilogramme. It is roughly equivalent to the weight of a water cube that is 10 centimeters in size.

What is the perfect weight for you?

Simply defined, having an optimum body weight means that you have a sleek, healthy physique and are not too thin (underweight) or even too huge (overweight). The best way to find this is to calculate your Bi, or body mass index.

How is a person's weight determined?

Throughout the world, body weight is expressed in kilos, a unit of mass, while in some nations, like the United States, it is measured by pounds or, as in the U.k., in stones and pounds. Even in the U.s, the majority of hospitals today use kilograms for

To know more about weight visit:

https://brainly.com/question/10990268

#SPJ4

The force exerted on the wall is the product of acceleration and mass of the ball. Acceleration of the wall is - 1600 m/s² . The force exerted on the wall is 80 N.

Force is an external agent acting on an object to change its state of motion or rest.  According to Newton' second law of motion, force is the product of acceleration and mass of the object.

Acceleration of a moving object is the rate of change in its velocity.

time  = 1/ 800 s

change in velocity = 18 -20 = -2 m/s

acceleration = -2 m/s/ (1/800 s) = - 1600 m/s²

mass of the ball = 50 g = 0.05 kg.

then  force = 0.05 kg × -1600 m/s² = - 80 N.

Therefore, the force applied on the wall is 80 N.

Find more on force:

https://brainly.com/question/14110395

#SPJ1

When a thing gains electrons in electricity, it'll become negatively charged. The collection of phenomena known as electricity is related to the existence and mobility of matter that possesses an electric charge.

The movement of electricity generation or charge is known as electricity. It is a sustainable energy source, meaning that we obtain it through the conversion of main energy sources like coal, fossil fuels, oil, nuclear power, and many other essential minerals.

In accordance with the U.S. Energy Management Administration, coal, nuclear power, and natural gas made up the majority of the country's electrical generation in 2020. Sources of renewable energy like wind, electricity, solar, biomass, wind, and groundwater are also used to generate electricity.

To know more about electricity visit:

https://brainly.com/question/1922668

#SPJ4

The speed is 282.84 if the tension is doubled.

According to the question, the speed of the tension is as follows

The formula we will use is

v = √ T /ρ

where v is the speed of the wave, T the tension in the wire, and ρ the density of the wire

If the tension is doubled

T = 2T₀

v = √ (2T₀ / ρ)

v = √2   √ T₀ / ρ

v = √2  v₀

Therefore,

v = √2  200

v = 282.84 m / s

What is the speed if the tension is doubled?

If the tension is doubled, what happens to the speed of the waves on the string? Since the speed of a wave on a taunt string is proportional to the square root of the tension divided by the linear density, the wave speed would increase by √2.

What is the wave speed on a string under tension?

The speed of a pulse or wave on a string under tension can be found with the equation. |v|=√FTμ where FT is the tension in the string and µ is the mass per length of the string.

To know more about wave speed:

https://brainly.com/question/3148541

#SPJ4

D) If none of the preceding conditions are met, then any solid cylinder will roll down an incline faster than any hollow cylinder.

The force component parallel to the incline rises as the angle increases, whereas the force component perpendicular to the incline falls. The acceleration is brought on by the parallel portion of the weight vector. Therefore, accelerations increase as incline angles increase.

A mass m particle will slide down an inclined plane if it is placed there and then released, meaning that there is no frictional force present. When a particle slides, we resolve in the direction of motion to determine the particle's acceleration. F = ma, mg cos(90) = ma, gg cos(90) = a, gg sin() = a.

To learn more about mass m particle here:

https://brainly.com/question/13732807

#SPJ4

Full Question = Any solid cylinder will roll down an incline with greater acceleration than any hollow cylinder if the...

a) diameter of the solid cylinder is large

b) mass of the solid cylinder is small

c) mass of the solid cylinder is large

d) none of the above are necessary

Actually, every second of time sees a change in velocity of 10 m/s, which is a constant. When an object's velocity changes, it is referred to as accelerating; this implies that the object has an acceleration.

Velocity is the rate of change in direction of an object that is moving as measured by a specific standard of time and observed from a specific point of reference (for example, 60 km/h northbound).

According to the formula v = s/t, speed (v) is a scalar quantity that quantifies dislocation (or a shift in position, s), over change in time (t).

To know more about velocity visit:

https://brainly.com/question/28738284

#SPJ4