The child's torque on the heel at the nine o'clock position is equal to (30)(9.8)(10)sin90=2940 Nm.
How much torque does the force passing through the Achilles tendon produce?The torque resulting from the upward force applied to the ball of the foot must be equal to the torque resulting from the force on the Achilles tendon. The force on the Achilles tendon times its lever arm equals the torque caused by the tendon.
Weight of child = 30kg
Radius = 10 meter
Mass of carriage = 80kg
To know more about torque visit:-
https://brainly.com/question/30338175
#SPJ4
2. (2 points) each scope probe has a short black ground wire attached to it. why is it necessary to connect this to the circuit's ground point in order to make a measurement?
If the equipment and the scope are both grounded, reconnecting the scope connection might enable measurement, but only for high- or low-frequency signals.
A frequency is what?Therefore, if a wave passes through in a half second, the rate is 2 every second. The rate is 100 times per hour if it occupies 1/10 of an hour. The number of full oscillations that any wave element makes in one unit of time is the frequency of the a sinusoidal wave.
What signs are there?To communicate with one another, humans utilise signals, which can be either gestures or messages. giving a close friend a wave.
To know more about frequency visit :
https://brainly.com/question/5102661
#SPJ4
the jacksons are driving to the lake when a car in front of their slams on its brakes. mrs. jackson slams on her brakes, too. everyone is wearing their seatbelts which stop them from being thrown forward in the car. what is the unbalanced force
The car stopping short is the unbalanced force.
A force is an influence that can change the motion of an object. A force can cause an object with mass to change its velocity to accelerate. Force can also be described intuitively as a push or a pull. A force has both magnitude and direction, making it a vector quantity. It is measured in the SI unit of newton (N). Force is represented by the symbol F.
When the resultant force acting on a body is not equal to zero, the forces acting on the body are known as unbalanced forces. The body acted upon by unbalanced forces changes its state of motion.
To know more about the force, here
brainly.com/question/26115859
#SPJ4
A boy pulls a sled 46 m across a flat field with a force of 120 N. The force acts on the sled through a rope at a 23° angle with the horizontal. What is the work the boy does on the sled? (Round your answer to two significant figures. )
When a force is applied with an angle to the x-axis, equation for work done is W= F×d×Cosθ. Here the work done is found to be 5.1×10³ J.
Work done is the quantity of energy transferred to the body to change its position or state of rest or state of uniform motion. Here we are applying a force to move the object to a distance. The equation for work done = Force× displacement.
Here the force applied make an angle 23° with the x-axis. So, the work done is calculated using the equation
W = F·cosθ ×d
F= 120N, θ= 23°, d= 46m
W = 120×Cos(23)×46
= 5.1×10³ J.
So to move the object to 46 m, by applying a force 120N with an angle 23° to horizontal axis, the work done is 5.1×10³ J.
For more information regarding Work done by force, kindly refer
https://brainly.com/question/16976412
#SPJ4
what is the magnitude, in meters per squared second, of the car's average acceleration during the given time period.
1.573 m/s² is the magnitude, in meters per squared second, of the car's average acceleration during the given time period.
Using given numerical values:
a_avg = ((v₁x - v₀x)/ Delta t) i + (v₁y/ Delta t) j
a_avg = (37 - 39)/2.9 i + 4.1/2.9 j
a_avg = -0.690 i + 1.414 j
Magnitude of average acceleration will be:
|a_avg| = √ ((-0.690)² + 1.414²)
|a_avg| = 1.573 m/s²
The greatest size and direction of an item are referred to as the object's magnitude in physics. Vector and scalar values both employ magnitude as a common denominator. Scalar quantities are understood to be those that have only magnitude, according to their definition. Vector quantities, on the other hand, are those that have both magnitude and direction.
Magnitude may be used in a number of different contexts. To name a few of them:
seismic event's strength
Dimension of an electron's charge
force's magnitude
Distance in magnitude
the gravitational force's strength.
Learn more about Magnitude here:
https://brainly.com/question/29766788
#SPJ4
The complete question is:
Give a vector expression for the average acceleration of the car during the given time period in terms of the variables in the problem and
unit vectors i and j.
a_ave = (V₀x + V₁x) i + (V₁y) j/Δt
Part (b) What is the magnitude of the car's acceleration during the time period in question, in m/s²?
the force of attraction that a -40HC charge point exerts on a +108HC point charge has magnitude 4.00N how far apart are these two changes
The distance between the two charges is 3.12 m.
What is the distance between the two charges?
The distance between the two charges is determined by applying Coulomb's law of electrostatic force.
F = kq₁q₂ / r²
where;
q₁ is the first chargeq₂ is the second charger is the distance between the chargesThe distance between the two charges is calculated as;
r² = kq₁q₂ / F
r = √ ( kq₁q₂ / F )
r = √ ( 9 x 10⁹ x 40 x 10⁻⁶ x 108 x 10⁻⁶ / 4 )
r = 3.12 m
Learn more about distance between charges here: https://brainly.com/question/27826314
#SPJ1
a system consisting of two blocks a and b connected by a non-extendable cable that runs around two pulleys. determine the kinematic relationships between the velocities and the accelerations of the block.
Kinematic relation between acceleration and velocities of a system consisting of two blocks named as a and b is g (m₂ - m₁)/(m₂ + m₁).
Utilizing the standard marking, let the more modest mass be m₂, and the bigger mass is m₁, and since the powers are just acting in the upward heading, we will involve the summation condition for the powers along the y-hub as it were.
It very well may be obviously seen that main two powers are following up on every one of the majority, that is to say, their own weight acting downwards and the pressure in the string acting upwards.Subsequently, the summation condition for powers on each mass can be composed utilizing the standard sign show, the vertical power is taken as certain, and the descending power is taken as negative.
T-m₁g = m₁a … . (1)
T-m₂g = - m₂a … . (2)
On settling (1) and (2) we get
a = g (m₂ - m₁)/(m₂ + m₁)
Where, T = Tension in the string, a = acceleration of the speed increase of two masses.
Hence,kinematic relation between acceleration and velocities is g (m₂ - m₁)/(m₂ + m₁).
To know more about acceleration,visit here:
https://brainly.com/question/28786308
#SPJ4
a mass is susoened by a spring and subject to an input force function f(t). what is the relationship between the inout force and the output velocity for the system
The relationship between the input force and the output velocity for a mass-spring system can be determined using the principle of linear systems.
For a linear system, the response of the system to a given input force is proportional to the input force.
m * d²×/dt² + kx = f(t)
where m is the mass, k is the spring constant, x is the displacement, and f(t) is the input force.
Taking the derivative of x with respect to time gives us the velocity, v(t), which can be substituted into the equation to give us:
m * d²v(t)/dt² + k ₓ dx/dt = df(t)/dt
So, the output velocity is proportional to the derivative of the input force. This means that the velocity of the system will increase as the rate of change of the input force increases. The proportionality constant between the input force and the output velocity is determined by the system's parameters (mass and spring constant).
It is important to note that this relationship holds only for linear systems and is only valid for small amplitude oscillations. For large amplitude oscillations or non-linear systems, this relationship may not hold.
To know more about input force here
https://brainly.com/question/9145571
#SPJ4
The diameter of copper wire is 7.360 mm. Find the resistance of a 5 km length of such wire used for power transmission. (Specific resistance of wire = 1.720 x 10^-8 ohm meter)
Answer:
2.05 Ω
Explanation:
We are here given that the
diameter= 7.360 mm = 0.7360 cm length of wire= 5km = 5000m specific resistance= 1.720 * 10-⁸ Ω mWe need to find out the resistance of the given wire . As we know that,
[tex]\implies R = \rho \dfrac{l}{A} \\[/tex]
[tex]\implies R =\rho \dfrac{ l}{\pi r^2} \\[/tex]
[tex]\implies R =\rho \dfrac{l}{\pi \dfrac{d^2}{4}} \\[/tex]
[tex]\implies R =\rho \dfrac{4l}{\pi d^2}\\[/tex]
substitute the respective values,
[tex]\implies R = 1.720 \times 10^{-8}\times \dfrac{4\times 5000m}{3.14\times (0.74\times 10^{-2}} \\[/tex]
[tex]\implies\underline{\underline{ R = 2.05 \Omega }} \\[/tex]
and we are done!
the thermal contact resistance may be viewed as a combination of two resistances: one due to the direct contact locations at the interface, and the other due to the gaps. these two resistances: group of answer choices are in parallel. are in series. can be either in parallel or in series.
The thermal contact resistance can be viewed as being in series. The resistance due to the direct contact locations at the interface and the resistance due to the gaps are both contributing to the overall thermal resistance of the interface.
The thermal resistance of the interface is the sum of the resistances of all the components in the thermal path. If the direct contact resistance and the gap resistance were in parallel, they would have an additive effect on the overall thermal resistance, but that is not the case for thermal contact resistance.
Thermal resistance is a measure of the ability of a material or system to resist the flow of heat. It is defined as the ratio of the temperature difference across the material to the heat flux through it.
Here you can learn more about The thermal resistance
brainly.com/question/14785719
#SPJ4
an acceleration in the positive direction always means that a moving object is speeding up. group of answer choices true
Acceleration is defined as a change in velocity over time. Therefore, an acceleration in the positive direction means that the velocity of the moving object is increasing, which means it is speeding up.
What is the direction ?The direction usually refers to a course or path of action that one should follow. It is a guide that outlines the steps that should be taken and the goals that should be achieved. Direction can be used to point an individual in the right direction and help them to reach their goals. Direction can also be used to provide guidance and motivation, allowing an individual to stay on track and make progress towards their desired outcome. Direction can come in many forms, such as instructions, advice, and guidance from mentors, peers, or mentors. It is important to seek out the right direction and to adjust when needed to ensure that one is able to achieve the desired outcome.
To learn more about direction
https://brainly.com/question/29598133
#SPJ4
Our turtle, Adel, walks 10 feet in 50 minutes. How fast is Adel traveling? Be sure to include the equation for speed in your answer.
The speed of the turtle, Adel is 0.2 feet per minutes.
What is speed?Speed is distance travelled by the object per unit time. Due to having no direction and only having magnitude, speed is a scalar quantity With SI unit meter/second.
Distance travelled by the turtle, Adel is = 10 feet
Time taken by the turtle is = 50 minutes.
Now we know that
speed = distance travelled ÷ time interval
Hence, the speed of the turtle is = 10 feet ÷ 50 minutes.
= 0.2 feet per minutes.
Hence, the speed of the turtle, Adel is 0.2 feet per minutes.
Learn more about speed here:
https://brainly.com/question/28224010
#SPJ1
if you weigh 665 n on the earth, what would be your weight on the surface of a neutron star that has the same mass as our sun and a diameter of 17.0 km ? take the mass of the sun to be ms
The weight of an object with a mass of 665 N on the surface of the neutron star significantly higher than on Earth, due to the much stronger gravitational pull of the massive neutron star is [tex](6.67 x 10^-11 m^3 / kg s^2)[/tex].
The weight of an object on the surface of a celestial body depends on its mass and the gravitational force acting on it. The equation for the force of gravity is given by[tex]F = G * (m1 * m2) / r^2,[/tex] where G is the gravitational constant, m1 and m2 are the masses of the two objects, and r is the distance between their centers.
To calculate the weight of an object on the surface of a neutron star with the same mass as the sun and a diameter of 17.0 km, we need to first find the mass of the neutron star and then the radius. The mass of the neutron star can be taken to be the same as that of the sun, which is approximately [tex]1.989 x 10^30[/tex] kilograms.
Next, we can use the formula for the radius of a sphere to find the radius of the neutron star: [tex]r = (3 * M) / (4 * pi * density)[/tex], where M is the mass of the neutron star and density is the average density of the star. The density of a neutron star is extremely high, on the order of several times that of atomic nuclei. For a neutron star with the same mass as the sun and a diameter of 17.0 km, the radius can be calculated to be about 5.6 km.
Finally, we can use the equation for the force of gravity to find the weight of an object on the surface of the neutron star:
[tex]F = G * (m1 * m2) / r^2[/tex]
where m1 is the mass of the object (665 N), m2 is the mass of the neutron star (1.989 x 10^30 kilograms), r is the radius of the neutron star (5.6 km), and G is the gravitational constant[tex](6.67 x 10^-11 m^3 / kg s^2)[/tex].
The weight of an object with a mass of 665 N on the surface of the neutron star would be significantly higher than on Earth, due to the much stronger gravitational pull of the compact and massive neutron star.
Learn more about Earth here
https://brainly.com/question/21576190
#SPJ4
an airplane is flying faster than the speed of sound at the altitude of the airplane. if the speed of the airplane decreases bu tthe airplane is still supersonic, what happens to the mach cone angle?
If an airplane is flying supersonic, its speed creates a cone-shaped disturbance of compressed air known as a Mach cone. The angle of the Mach cone is dependent on the airplane's speed relative to the speed of sound. If the airplane's speed decreases while it is still supersonic, the Mach cone angle will widen.
When an airplane travels faster than the speed of sound, it generates a Mach cone. The Mach cone is created by the compression of the air in front of the airplane as it moves through the air. The Mach cone's angle depends on the airplane's speed relative to the speed of sound.
If the airplane's speed decreases while it is still supersonic, the Mach cone angle will increase or become wider. This is because the Mach cone angle is inversely proportional to the airplane's speed. The slower the airplane travels, the wider the Mach cone angle becomes.
The Mach cone angle is an important consideration in supersonic flight because it affects the aerodynamics and stability of the airplane. A wider Mach cone angle can lead to increased drag, which can affect the performance of the airplane. This is why monitoring and controlling the Mach cone angle during supersonic flight is important.
Learn more about speed of sound at:https://brainly.com/question/30401576
#SPJ4
if a resistor of is rated at a maximum power dissipation of , what is the maximum current it can safely handle without damage?
Highest current that a resistor with a rating of 6 ohms and a maximum power consumption of 0.5 watts can safely withstand without breaking
Describe a current?Electrical charge flow is referred to as a current. Transporting electrons from one place to another allows current to flow electrically. Solid conducts and electrolytes facilitate the easy movement of electrons. Current is frequently quantified using amperes.
The passage of electrical charges along a surface at a rate with one charge density per second is measured by the SI unit for electric current, known as the ampere, or amp. A standard SI base unit is the ampere (symbol: A). The ammeter is a tool used to measure electric current.
An ammeter is what?Ammeter, apparatus
To know more about the current visit :
https://brainly.com/question/13076734
#SPJ4
a circular swimming pool has a diameter of 20 m. the circular side of the pool is 4 m high, and the depth of the water is 3.5 m. (the acceleration due to gravity is 9.8 and the density of water is 1000 .) how much work (in joules) is required to:
The required work to pump all of the water over the side is calculated to be 24617600 J.
Density of water = 1000 kg/m³
Acceleration due to gravity = 9.8 m/s²
Depth of water h = 3.5 m
Area of pool of diameter d = 20 m
A = π(d²/4) = 3.14×20²/4 = 314 m²
Wall height of the pool = 4 m
Force on the bottom of the pool due to water = ρ g h A = 1000×9.8×2×314 = 6154400 N
Amount of work required to pump all of the water over the side is,
Work = F × h = 6154400 × 4 = 24617600 J
Thus, the work required to pump all of the water over the side is calculated to be 24617600 J.
The given question is incomplete. The complete question is 'i.pump all of the water over the side?'
To know more about work:
https://brainly.com/question/15904658
#SPJ4
(06.01 mc) why does earth rotate? because earth is formed from cold gases collapsing due to gravity because the matter in the nebula that formed earth was spinning because earth forms more than 99% of the mass of the solar system because the hydrogen atoms inside the nebula fused to form helium
The earth rotate because earth is formed from cold gases.
The earth rotate because it makes up more than 99% of the mass of the solar system since it was created by cold gases collapsing under the influence of gravity, spinning material in the nebula that created it, and fusion of hydrogen atoms into helium in the nebula.
Earth rotates because the sun draws it and pulls it towards it. In addition, because of the earth's revolution around the sun, it tends to move away from the sun in the direction of the tangent, creating a rotating force (torque) that pulls the earth towards rotation.
Learn more about rotate
https://brainly.com/question/16455426?referrer=searchResults
#SPJ4
what is the speed, in meters per second, of the fluid as it moves through the wide section of the horizontal tube?
To find the speed of the fluid as it moves through the wide section of the horizontal tube, we need to know the values of V2 = V1 * A1 / A2
To find the speed of the fluid as it moves through the wide section of the horizontal tube, we need to know the volume flow rate of the fluid, the cross-sectional area of the wide section, and the density of the fluid. Assuming that the fluid is incompressible and has a constant density, the volume flow rate remains constant as the fluid moves from the narrow section to the wide section. Therefore, the speed of the fluid can be calculated using the equation of continuity:
V1 * A1 = V2 * A2,
where V1 is the fluid velocity in the narrow section, A1 is the cross-sectional area of the narrow section, V2 is the fluid velocity in the wide section, and A2 is the cross-sectional area of the wide section.
So, we can solve for V2:
V2 = V1 * A1 / A2.
Therefore, to find the speed of the fluid as it moves through the wide section of the horizontal tube, we need to know the values of V1, A1, and A2.
Learn more about speed speed here
https://brainly.com/question/6280317
#SPJ4
Consider the following solvent pairs when mixed: Which are immiscible/miscible? If the solvents are immiscible, which solvent would be in the top layer?
a. hexane and water
b. methylene chloride and water
c. ethanol and water
d. ether and water
The solvents that will be in the top layer are hexane, methylene chloride and ether.
What are solvents?
A solvent is a substance in which other substances are dissolved to form a solution. Solvents play a crucial role in many chemical processes and are used in a variety of applications such as cleaning, paint thinning, and extractions. Solvents can be either polar or non-polar, and this polarity determines the solubility of other substances in the solvent.
When two solvents are mixed, they can be either immiscible, meaning they do not mix and form separate layers, or miscible, meaning they mix and form a homogeneous solution. The relative density of the solvents will determine which solvent will be in the top layer.
a. hexane and water are immiscible, and hexane would be in the top layer.
b. methylene chloride and water are immiscible, and methylene chloride would be in the top layer.
c. ethanol and water are miscible, meaning they can form a homogeneous mixture.
d. ether and water are immiscible, and ether would be in the top layer.
To learn more about solvents:
https://brainly.com/question/25326161
#SPJ4
if three uncharged styrofoam balls are placed together and agitated so that one gains 3 c of charge and another gains 4 c of charge, how much charge must there be on the third one?
−7 C. Like charges attracts and unlike charges repel. When the three charges are are agitated, the +3 C and +4 C will repel to give of +7 C. The third strike will be -7 C to provide an arithmetic sum of 0 in the system, bringing the system into balance.
What three categories of fees are there?Subatomic particles or matter particles are examples of the different forms of charges:Positive charge characterizes protons.Negative charge characterizes electrons.There is no charge on a neutron.
Are there really only two fees?There are just two different kinds of charge, positive and negative.The force among charges diminishes with the cube of the distance, with like charges repelling and unlike charges attracting.
To know more about repel visit:
https://brainly.com/question/15744700
#SPJ4
how to find the frequency of a wave from the displacement of a wave traveling in the positive x -direction
The displacement y of a wave travelling in the x-direction is given by y=10−4sin(600t−2x+2π) metres.
Where x is expressed in metre and t in second.
What is motion?
Objects, bodies, matter particles, matter fields, radiation, radiation fields, radiation particles, curvature, and space-time are only a few examples of physical systems where motion is applicable. One may also discuss the movement of borders, shapes, and images. The word "motion" often refers to a continual change in the positions or arrangement of a physical system in space. One can discuss the motion of a wave or a quantum particle, for instance, where the configuration is the likelihood that the wave or particle would occupy a particular place.It should be noted that when the wave is travelling in the positive x-direction, the equation for the wave is given as y=Asin(kx−ωt).
But if this wave is travelling in the negative x-direction then the wave equation is given as y=Asin(kx+ωt)
To know more about the motion, click the link given below:
https://brainly.com/question/22810476
#SPJ4
The wine poured in the pot_______ heat,. Increasing in its molecular collisions that overcome the intermolecular attraction forces. Almost immediately, part of the wine_______. You cover the pot with a lid, to let the beef cook slowly and become tasty
Heat the saucepan after the wine has been added. Growing molecular collisions that defeat the forces of intermolecular attraction. A portion of the wine starts to boil away almost instantly.
What's a good illustration of molecular attraction?Example: The polar H2O molecules are drawn to the sodium and chloride ions in the beaker when NaCl and water are combined there. This interaction's potency is determined by: how big the dipole moment is.
What draws molecules together?
Polar molecules line up so that their positive ends interact with each other's negative ends. Unlike the atoms' covalent bonds in a molecule (intramolecular bonding)
To know more about atoms visit:
brainly.com/question/14758126
#SPJ4
how many additional electrons can a fluorine atom attract
Answer: Fluorine has seven valence electrons, so it is most likely to gain one electron to form an ion wit a 1- charge.
Explanation:
A fluorine atom can attract one additional electron to fill its outermost shell and achieve a stable electron configuration. This ability to attract electrons is due to fluorine's high electronegativity, which is a result of its small atomic size and high nuclear charge. The strong attraction between fluorine and electrons makes it highly reactive and capable of forming strong chemical bonds with other elements.
Atoms are composed of positively charged protons, negatively charged electrons, and neutral neutrons. The number of electrons in an atom determines its chemical properties, as the electrons are involved in chemical bonding. Some atoms have a tendency to attract additional electrons to fill their outermost electron shell, which can result in the formation of ionic or covalent bonds. Fluorine is one such atom that has a strong tendency to attract additional electrons due to its high electronegativity.
Fluorine is a highly electronegative element, meaning it has a strong tendency to attract electrons towards itself. This is due to its small atomic size and high nuclear charge, which results in a strong electrostatic attraction between the positively charged nucleus and the negatively charged electrons.
Fluorine has seven electrons in its outermost shell, which means it is only one electron short of having a full outer shell. This makes fluorine highly reactive, as it has a strong tendency to attract an additional electron to fill its outer shell and achieve a stable electron configuration. When fluorine attracts an additional electron, it forms a negative ion called fluoride.
The strength of fluorine's electronegativity can be quantified using a scale called the Pauling scale. Fluorine has the highest electronegativity of all the elements on the periodic table, with a Pauling electronegativity value of 4.0. This means that fluorine can attract electrons more strongly than any other element, making it highly reactive and capable of forming strong chemical bonds with other elements.
Here you can learn more about electronegativity
https://brainly.com/question/2060520#
#SPJ11
when i replace old belt with new belt on shark vacuum the roller brush will run and then the roller brush will stop running ?
There could be several reasons why the roller brush on your Shark vacuum stops running after you replace the old belt with a new one, Incorrectly installed belt, Belt tension, Blockages in the vacuum, Broken brush roll, Motor issues.
Double-check that you have installed the new belt correctly. If the belt is not installed properly, it may not be able to transfer power to the roller brush properly. Make sure the new belt is properly tensioned. If the belt is too loose or too tight, it can affect the performance of the roller brush.
Check for blockages in the vacuum, including the brush roll area. Blockages can cause the brush to stop spinning. If the brush roll is broken or damaged, it may not spin properly, even with a new belt. If none of the above solutions work, the problem may be with the vacuum's motor. A malfunctioning motor can cause the brush to stop running properly. If this is the case, you may need to take the vacuum to a repair shop to have it fixed.
To know more about Shark vacuum model , here
https://brainly.com/question/28418611
#SPJ4
what did curiosity discover about the atmospheric conditions on mars?
Overall, Overall, Curiosity's observations have provided valuable insights into the Martian atmosphere and helped to improve our understanding of the Red Planet.have provided valuable insights into the Martian atmosphere and helped to improve our understanding of the Red Planet.
How does Curiosity generate the energy needed to explore Mars?The rover need power to operate. Without electricity, it cannot move, use its scientific apparatus, or communicate with Earth. On Curiosity, a radioisotope power system generates electricity from heat created by the radioactive decay of plutonium.
Thin atmosphere: Curiosity's measurements of the Martian atmosphere have shown that it is much thinner than Earth's, with a surface pressure of only about 1% that of Earth's. This means that the atmosphere provides very little protection from the harsh radiation environment on Mars.
Seasonal changes: Curiosity has observed seasonal changes in the Martian atmosphere, with the amount of methane gas increasing and decreasing over the course of a Martian year. This could be a sign of active geological or biological processes on the planet.
Dust storms: Curiosity has observed and studied several dust storms on Mars. These storms can have a significant impact on the Martian atmosphere, causing changes in temperature, pressure, and the amount of sunlight reaching the surface.
To know more about Martian atmosphere visit:-
https://brainly.com/question/29483748
#SPJ4
human nerve cells have a net negative charge and the material in the interior of the cell is a good conductor. for related problem-solving tips and strategies, you may want to view a video tutor solution of
The cell boundary's net flux measures -0.887 [tex]Wb.m^{2}[/tex] in both magnitude and direction (inward or outward).
Any impact that seems to flow through or move through a surface or substance is referred to as a magnetic flux. The following formulas are used to determine the size and direction (inward or outward) of the net flux through the cell boundary:
Ф = Q/ε, where:
Q is the net charge
ε is the permittivity of free space.
As per the question,
Φ = (-7.85 x 10⁻¹²)/ (8.85 x 10⁻¹²)
Φ = - 0.887 Wb.m²
The negative sign here indicates the outward flow of the flux. Magnetic flux is a measure of the strength of a magnetic field over a specific area, to put it simply. It has [[tex]ML^{2} T^{-2} A^{-1}[/tex]], as the dimension of mass length squared per square of time and electric current.
To know more about magnetic flux, refer:
https://brainly.com/question/15799032
#SPJ4
Complete question is:
The human nerve cells have a net negative charge and the material in the interior of the cell is a good conductor. if the cell has a net charge of - 7.85 pc, what are the magnitude and direction (inward or outward) of the net flux through the cell boundary.
Identify the scenario, where the crash sensor of a car can possibly send signals to inflate the airbag in automobiles.
When a car is stopped abruptly by an impact, the airbags are inflated.
An airbag is an inflatable safety device designed to protect the occupants of a car in case of a collision. The airbags are part of an occupant restraint system and are also referred to as air cushion restraint system. Airbags supplement the basic protection offered by seat belts.
When a car is stopped abruptly by an impact, all bodies or objects that are not firmly fixed to the car will continue to move at the impact speed. The sensors measure this acceleration and relay it to the control unit as usable data.
To know more about the airbags, here
brainly.com/question/29869944
#SPJ4
Two unknown elements react to form a single compound. Element 1 is shiny, malleable, and conductive. Element 2 is a non-conductive gas. When they react,
what would you expect to be true about the compound produced?
A. The compound will probably have properties of both elements like a metalloid.
B. The compound will probably have high boiling points and melting points and will be conductive in solution
C. The compound will probably have low boiling and melting points and will not be conductive in solution.
D. The compound will probably have high boiling and melting points and will not be conductive in solution,
lol
The compound is created when two unidentified components combine. The material is malleable and glossy. The chemical will likely highly conductive in solution and have high melting and boiling points.
Choice B is correct as a consequence.
What is malleable strength?The solid's malleability refers to its capacity to flex or otherwise be hammered together into different form without cracking. If a substance is malleable, it may be rolled or hammered into something akin to a fine layer without being used.
What is malleable ability?Malleability is the capacity of a material, often metal, to be bent as well as molded into a new shape.
To know more about malleable visit:
https://brainly.com/question/24610841
#SPJ4
How many electrons does a gallium-(2+) ion have?
2nd question
How many electronics does a Titanium-(2-) ion have?
Answer:
gallium ion has 31 electrons
titanium ion has 20 electrons
voltages of about 50v can cause an electric shock (assuming contact with dry hands, as in this experiment). based on your experimental results, how much current would be going through your body with such a voltage?
Due to the insufficient electrical energy to interfere with biological functioning, low-voltage shocks of 50V have never proved deadly. This low power output is indeed the cause of this.
What occurs when you touch 120 volts?Deep burns can be brought on by large electrical currents of 500 V or more, whereas muscle spasms can be brought on by low voltage currents of 110–120 V. Exposure with or without a flow of electrons from with a tiny home device, wall socket, or extension cord can result in an electric shock.
What occurs if you receive a 50 volt shock?In terms of electrical safety, exposure to voltages lower than 50V a.c. is typically regarded as low risk. Although a 50V a.c. electric shock is improbable to be lethal, it can nonetheless be uncomfortable and cause.
To know more about voltages visit :
https://brainly.com/question/13521443
#SPJ4
If you drop an object from a height of 0.8 m, it will hit the ground in 0.40 s. If you throw a baseball horizontally with an initial speed of 17 m/s from the same height, how long will it take the ball to hit the ground?
Answer suppose to be in seconds
Answer:
The time it takes for an object to hit the ground depends on its vertical velocity, which is determined by the force of gravity. In this scenario, the vertical velocity of the baseball is determined by its initial vertical velocity (0 m/s) and the acceleration due to gravity (-9.8 m/s^2). The vertical displacement of the baseball can be found using the equation:
d = v_0t + 0.5at^2
where d is the vertical displacement (0.8 m), v_0 is the initial vertical velocity (0 m/s), t is the time, and a is the acceleration due to gravity (-9.8 m/s^2).
Rearranging the equation and solving for t:
t = √(2d/a)
t = √(2 * 0.8 / -9.8)
t = 0.44 seconds
So it takes the baseball 0.44 seconds to hit the ground.