A 3.0 L container holds a sample of hydrogen gas at 300 K.

The temperature decreases to 200 K and the pressure remains constant.

What will the volume be?
A)0.1 L
B)0.5 L
C)1.0 L
D)2.0 L

Sodium azide, also known as NaN₃, is the principal chemical involved in the airbag reaction.

What is a chemical reaction?

In a chemical reaction, one or more reactants (also known as reactants) are changed into one or more products (also known as products).

Sodium azide, also known as NaN3, is the principal chemical involved in the airbag reaction.

This molecule is fairly stable under typical conditions. But if heated, it will crumble. The exact breakdown is described by the chemical equation

2 NaN₃ --> 2 Na + 3 N₂.

N₂, or nitrogen gas, is the second byproduct of the aforementioned reaction. The amount of nitrogen gas produced by a handful (130 grams) of sodium azide is 67 liters, which is sufficient to inflate a typical airbag.

To learn more about reaction data, click on the below link:

https://brainly.com/question/29775381

#SPJ4

According to the claim made, the maximum current it can produce for 70 hours is 2.71A.

To create a lead-acid battery, two electrodes are submerged in an environment of sulfuric acid. In contrast to the column, the harmful electrode is attached to a mesh of metallic lead. The metallic lead oxide grains that make up the column are constructed.

Since lithium-ion batteries can tolerate higher current rates, they can be charged more quickly than lead-acid batteries. For applications that require quick responses, where vehicles are utilized more frequently and with less breaks, this is crucial. As more water is converted to hydrogen, the amount of water inside the battery drops.

The maximum current for 65 hours will be I = 190Ah/70h I = 2.71 A.

To know more about Lead-acid battery visit:

brainly.com/question/29643320

#SPJ4

We know that the reaction when shown in words is called a word equation.

We know that when we write a chemical equations, we are trying to show what is going on when there are reactants and products in the reaction. We know that the species that we write on the left hand side are the reactants while the ones that we write on the right hand side are the products.

If we use chemical symbols then we call it a chemical reaction equation. If we use words to show the reactants and the products then we call it a word equation.

Learn more about reaction:https://brainly.com/question/28984750

#SPJ1

Stars are made of mostly hydrogen and helium, held together by the Sun.

Are stars mostly made of hydrogen and helium?

Massive celestial objects called stars, which are primarily composed of hydrogen and helium, generate light and heat from the churning nuclear forges inside their cores. The other flecks of light we see in the sky, besides our sun, are all light-years away from Earth.

What holds a star together?

The process responsible for a star's luminosity is known as nuclear fusion. The pull of gravity is resisted by the hot gas as it pushes outward. A star is created by this harmony of forces. It maintains the star's structural integrity and maintains its temperature throughout the majority of its lifespan.

What causes stars to group together?

The majority of stars in the Milky Way are found in pairs or clusters of multiple stars, which is consistent with predictions made by three-dimensional computer models of star formation that the collapsing spinning clouds of gas and dust may split into two or three blobs.

To know more about stars:

https://brainly.com/question/17870368

#SPJ1

Answer:

True

Metals above hydrogen in the reactivity series will displace hydrogen from acids, forming a salt and releasing hydrogen gas. Metals below hydrogen in the reactivity series are not reactive enough to displace hydrogen and will not react with acids to form hydrogen gas.

When the engineer adds an additional 1.2 atm of nitrogen dioxide, the total pressure of the mixture is 4.9 atm + 1.2 atm = 6.1 atm. At equilibrium, the pressure of dinitrogen tetroxide is approximately 2.3 atm.

This is calculated by subtracting the equilibrium pressure of nitrogen dioxide (2.7 atm) from the total pressure of the system (6.1 atm). Therefore, after equilibrium is reached the second time, the pressure of dinitrogen tetroxide is 2.3 atm.

When nitrogen dioxide gas is added to a system, the equilibrium pressure of dinitrogen tetroxide is determined by Le Chatelier's principle. This principle states that when a system is disturbed from equilibrium, it will shift to re-establish equilibrium.

Learn more about Nitrogen dioxide:

https://brainly.com/question/9183984

#SPJ4

No, the photons of light emitted by the helium atoms after they absorb energy will not be found at all wavelengths.

When an atom absorbs energy, its electrons move to higher energy levels. When the electrons return to their lower energy levels, they release energy in the form of photons of light. The wavelength of the light emitted is specific to the energy difference between the two levels and is dependent on the electron transition.

Each electron transition will result in the emission of a specific wavelength of light, and not all transitions will emit light at the same wavelength. Therefore, the photons of light emitted by the helium atoms will be found at specific, characteristic wavelengths and not at all wavelengths.

This principle is known as spectral emission, and it is the basis for many analytical techniques, such as spectroscopy, which uses light to study the properties of materials. Spectral emission can also be used to identify the presence of specific elements or compounds, as each has its own unique set of characteristic wavelengths.

Learn more about photons:

brainly.com/question/20912241

#SPJ4

The repeating covalently-bonded backbone atoms in a polypeptide are carbon (C), nitrogen (N), and oxygen (O).

These atoms make up the backbone structure of the polypeptide, connecting the amino acids in a chain-like structure. The repeating pattern starts with a nitrogen atom in the amine group (-NH2) of one amino acid, which is bonded to a carbon atom in the alpha (α) carbon, which is also bonded to a hydrogen (H) atom.

This carbon atom is also bonded to a second nitrogen atom in the carboxyl group (-COOH) of another amino acid, which is bonded to a second carbon atom in the second alpha carbon, and so on. This repeating pattern of nitrogen, carbon, and oxygen atoms forms the backbone of the polypeptide, connecting the amino acids in the direction from the amino to the carboxyl end.n:

You can read more about polypeptides at https://brainly.com/question/11136648

#SPJ4

Yes, beta sheet is a secondary protein structure found in proteins.

Beta-Pleated Sheets of Protein is defined as a special type of secondary structure of a protein. Beta-Pleated Sheets consists of different beta strands linked by hydrogen bonds between the adjacent strands. Around three to ten amino acids are combined to create a beta-strand polypeptide.

Generally, a beta-pleated protein sheet is a type of protein secondary structure. Most of the proteins contain both α-helices and β-sheets, but some proteins contain only one type of secondary structure . A beta sheet is that type of secondary structure which describes how the backbone of a protein is arranged in space.  Beta-pleated protein sheet  consists of at least two beta strands.

Learn more about beta sheet from the link given below.

https://brainly.com/question/14728237

#SPJ4  

A polyatomic ion is a group of atoms that have a net charge and act as a single unit in chemical reactions. Some common examples of polyatomic ions include nitrate (NO3-), carbonate (CO32-), and sulfate (SO42-).

Ionic compounds are composed of positive and negative ions. The positive ions, or cations, are usually composed of metal elements and the negative ions, or anions, are typically composed of non-metal elements. The combination of these ions creates a formula unit, which is a neutral compound that results from the total balance of positive and negative charges.

The formula units in an ionic compound are held together by electrostatic attraction, or the force of attraction between opposite charges. This type of bonding results in a repeating lattice-like structure, with the cations and anions arranged in a specific pattern.

In a covalent bond, electrons are shared between the atoms, rather than being transferred from one atom to another as in an ionic bond. Polyatomic ions can form covalent bonds with other polyatomic ions or with individual atoms to form compounds. For example, the polyatomic ion carbonate (CO32-) can form a covalent bond with a metal cation, such as sodium (Na+), to form sodium carbonate (Na2CO3). The carbonate ion shares its electrons with the sodium ion to form a neutral compound.

learn more about atoms here:

https://brainly.com/question/13654549

#SPJ4

Taking into account the definition of Avogadro's Number, 3.704×10²³ atoms are in a sample of 0.615 mol Ne.

Avogadro's number indicates the amount of elementary entities (molecules, atoms, ions or other similar particles) that a mole of any substance contains. It applies to molecular and atomic substances.

Its value is 6.023×10²³ particles per mole.

You can apply the following rule of three: If 1 mole of Ne contains 6.023×10²³ atoms, 0.615 mole of Ne contains how many atoms?

amount of atoms= (0.615 moles ×6.023×10²³ atoms)÷ 1 mole

amount of atoms= 3.704×10²³ atoms

Finally, 3.704×10²³ atoms of Ne are present.

Learn more about Avogadro's Number:

brainly.com/question/11907018

#SPJ1

Liquefaction of gases is the process by which a gas is converted into a liquid. This process is usually accomplished by applying pressure and cooling the gas. It is essential for the production of many industrial products, such as oxygen, nitrogen, argon, and carbon dioxide. It is also used in the production of cryogenic liquids, such as liquid nitrogen and liquid helium, which are used in many applications, such as cooling and food processing.

Process Involved in Liquefaction

The process of liquefaction is often accompanied by an increase in volume, as the molecules become more densely packed when they condense.

To know more about Liquefaction of gases, visit:

https://brainly.com/question/13856167

#SPJ1

Answer:

The theoretical yield of Br₂ for this reaction is 18.09 grams.

The reaction's thermochemical equation is -23.3 kJ/mol.

A chemical equation known as a thermochemical equation contains data on the energy changes that take place during a chemical process. The heat change (H) resulting from the reaction, which can either be endothermic (absorbing heat) or exothermic (producing heat), is included in a thermochemical equation together with the reactants and products of the process (releasing heat).

When the change in enthalpy, H, is added to the equation, the thermochemical equation is complete:

The formula 2CO2(g) + 5H2(g) = C2H2(g) + 4H2O(g) = -23.3 kJ/mol

Which also can be explained as:

23.3 kJ of energy are absorbed for every mole of CO2(g) that undergoes the reaction, as the change in enthalpy is -23.3 kJ/mol. Due to the fact that this reaction is endothermic, energy from the surrounding environment is required to fuel it.

Overall, the reaction's thermochemical equation is 2CO2(g) + 5H2(g)=C2H2(g) + 4H2O(g), with = -23.3 kJ/mol.

To know more about thermochemical equation, visit:

https://brainly.com/question/2874342

#SPJ1

When 100.0 ml of a buffer solution that contains 0.100 m in each of nh3(aq) and nh4cl and 8.00 ml of 0.100 m hcl(aq) are combined, the resulting pH change is 0.07 (aq).

the buffer  has

[NH3] = 0.1 M

[NH4Cl] = 0.1 M

pKb of NH3 = 4.75

thus

i)

pH of original buffer

pOH = pKb + log [conjugate acid]/[base]

         = 4.75+ log 0.1/0.1= 4.75

and pH = 14-pOH = 9.25

ii) when 8mL of 0.1M Hcl added to 100mL of buffer

NH3                               + HCl            ============>  NH4Cl

100x0.1=10                      0                                                 100x0.1=10  initial mmoles

----------                         8x0.1=0.8                                  -----------   change

9.2                                   0                                               10.8        equilbrium

thus

pOH of this buffer solution = 4.75 + log 10.8/9.2= 4.82

and pH = 14-POH = 14-4.82 =9.18

change in pH = final - initial pH = 9.18 - 9.25 =-  0.07 ( pH decreases by 0.07 units)

iii) 8.0mL of 0.1M NaOH added

NH4CL                          + NaOH          -------------------> NH3               + NaCl + H2O

100x0.1=10                           0                                     100x0.1=10  --------------------  initial mmoles

------------                          8x0.1=0.8                             ---------------------------------- change

9.2                                    0                                             10.8         ------------equilibrium

pOH =  4.75 + log 9.2/10.8

         = 4.68

pH = 14-4.68= 9.32

Change in pH = 9.32-9.25 = 0.07  (pH increases by 0.07units)

Learn more about buffer solution here:

https://brainly.com/question/24262133

#SPJ4

Answer:

C thick blocks of lead

Explanation:

Inserting the proper shielding like lead, concrete, or special plastic shields depending on the type of radiation between a worker and a radiation source will greatly reduce or eliminate the dose received by the worker

The elastic modulus of a material is a measure of its resistance to deformation when subjected to an applied force. The larger the elastic modulus, the stiffer the material and the more resistant it is to deformation.

In this case, aluminium (Al) has a larger elastic modulus than silicon (Si). The exact values depend on the specific form of the materials, but in general, aluminium has an elastic modulus of around 69 GPa, while silicon has an elastic modulus of around 160-190 GPa.

The reason for this difference is due to the differences in the crystal structure and bonding of the two elements. Aluminium has a face-centred cubic crystal structure and covalent bonding, which results in a relatively high elastic modulus. Silicon has a diamond cubic crystal structure and covalent bonding, which leads to an even higher elastic modulus.

To know more about elastic modulus, visit the link given below:

https://brainly.com/question/30505066

#SPJ4

Water is not a suitable buffer because there is not enough acid or base in the given amount of water that is produced when another acid or base is added. So the answer is c.

Water is not a suitable buffer because there is not enough acid or base in the given amount of water that is produced when another acid or base is added. Water has unique chemical properties in all three states: solid, liquid, and gas, thanks to the ability of its molecules to form hydrogen bonds with each other. From humans to bacteria, living organisms have a high water content, so understanding the unique chemistry in his three states of water is key to biology.  

Learn more about Buffer

brainly.com/question/10695579

#SPJ4

There are approximately 3.8 x [tex]10^{6}[/tex] g of Sodium Chloride in 65 liters of the solution.

The number of grams of NaCl in 65 liters of a solution can be determined by using the concentration of the solution. Since the concentration of NaCl is not given, it's not possible to determine the exact number of grams of NaCl in 65 liters of the solution.

However, if we assume that the solution is an aqueous solution of NaCl, we can make an estimate using the density of water. The density of water is approximately 1 g/mL, so 65 liters of water is approximately 65 × 1000 = 65000 mL of water. This means that if the concentration of NaCl in the solution is 1 M, then there would be 65000 mL × 1 M = 65000 moles of NaCl in the solution. Since the molar mass of NaCl is 58.44 g/mole, this would correspond to 65000 moles x 58.44 g/mole = 3.80 × [tex]10^6[/tex] g of NaCl.

This is a rough estimate, and the actual number of grams of NaCl in 65 liters of solution would depend on the actual concentration of NaCl in the solution. However, if we use 2 significant figures, we can estimate that there are approximately 3.8 × [tex]10^6[/tex] g of NaCl in 65 liters of the solution.

Learn more about Sodium Chloride:

brainly.com/question/9811771

#SPJ4

In addition to the light source (100W incandescent or other polychromatic light source) and detector, the spectrophotometer contains a prism or grating to capture different wavelengths from the light source and a slit to select a narrow range of wavelengths. is also required.

Spectrophotometry is a standard and inexpensive technique for measuring light absorption or the amount of chemicals in solution. Using a light beam that passes through the sample, each compound in solution absorbs or transmits light of a specific wavelength. A spectrophotometer consists of three main components: A light source, optics for delivering and collecting light, and a detector.  

Learn more about spectrophotometer

brainly.com/question/27981115

#SPJ4

Answer:

The purpose of burette reading is to tell you how much solution has been dispensed, instead of telling you how much the burette contains. Unlike other volumetric glassware, the zero scale on a burette is written on top. Measurement scale on the burette is at 0.10 intervals. All burette readings are given to an accuracy of 0.05 mL.

Make sure your eye is at the same level of the meniscus to avoid an error. For water and most liquids, the meniscus is concave or like a U shape. Read the center of the meniscus or the bottom of the U-shape.

A zoomed-in section of the burette between 20.5 milliliters and 18.5 milliliters shows the level of the solution in the burette. There is a concave meniscus at the surface of the solution. There are 3 eyes on the right side of the burette looking at the level of the solution from above, at, and below the meniscus. The eye above the meniscus reads the solution level to be at 19.42 milliliters. The eye at the same level as the meniscus reads the level of the solution to be 19.5 milliliters. The eye below the meniscus reads the level of the solution to be 19.62 milliliters. The correct measurement of the solution level is 19.5 millimeters.

Figure: How to read the meniscus. The correct reading is 19.50 mL. Due to parallax error, the reading can be 19.62 mL or 19.42 mL.

The first and final reading of the burette should be recorded. The difference between the first and final reading is called the titer.

Readings should be recorded to the nearest 0.05 mL. Examples of readings: 22.05, 23.00, and 23.05 mL.

Can I get Brainliest?

Explanation:

Answer:

The rock in a bucket of water analogy is used to describe how air masses interact. When a warm air mass is placed over a cold air mass, it is like a rock being placed in a bucket of water. The warm air mass will initially rise, creating an area of low pressure. The cold air mass will then rush in to fill the area of low pressure, creating a storm. This type of weather causes thunderstorms, heavy rains, and high winds.

The empirical formula of compound X is Zn3O4.

To determine the empirical formula of compound X, we need to find the mole ratio of zinc and oxygen in the compound. We can assume a 100-gram sample of the compound to make the calculations easier.

The mass of zinc in the compound is 75.3 grams (75.3% of 100 g).

The mass of oxygen in the compound is 24.5 grams (24.5% of 100 g).

Next, we need to convert the mass of each element to moles, using their respective atomic masses:

Zinc: 75.3 g / 65.38 g/mol = 1.152 moles

Oxygen: 24.5 g / 15.99 g/mol = 1.532 moles

We then divide both mole values by the smallest mole value to get the mole ratio:

Zinc: 1.152 moles / 1.152 moles = 1

Oxygen: 1.532 moles / 1.152 moles = 1.33

We need to convert the mole ratio to the simplest whole number ratio by dividing both values by the smallest value (1):

Zinc: 1 / 1 = 1

Oxygen: 1.33 / 1 = 1.33 (rounded)

Since we need a whole number for the formula, we multiply both values by 3 to get rid of the decimal:

Zinc: 1 x 3 = 3

Oxygen: 1.33 x 3 = 4 (rounded)

The empirical formula of compound X is Zn3O4.

The freezing point depression of a solution is proportional to the number of solute particles dissolved in a solvent. Table salt (NaCl) is a strong electrolyte that dissociates into two ions (Na+ and Cl-) in water, while table sugar (sucrose) is a nonelectrolyte that does not dissociate into ions.

A nonelectrolyte is a substance that does not ionize or dissociate into ions when dissolved in a solvent, such as water. Unlike electrolytes, which dissociate into ions and conduct electricity, nonelectrolytes do not conduct electricity when dissolved in a solvent.

Examples of nonelectrolytes include sugar, glucose, and urea. When dissolved in water, these substances do not ionize and do not conduct electricity. Instead, they exist as individual molecules that do not participate in ionic interactions.

Nonelectrolytes are essential components of many biological processes, including metabolism and cellular respiration. For example, glucose acts as a source of energy for living organisms and is transported through the body as a nonelectrolyte. In contrast, electrolytes, such as sodium and potassium ions, play a critical role in maintaining fluid balance and conducting nerve impulses in the body.

To learn more about Nonelectrolyte visit here:

brainly.com/question/29771118

#SPJ4

The gas will have a volume of 240 mL at a temperature of 421.621 K Celsius according to the stated equation.

The temperature of the air is measured using thermometers. Common thermometers feature an extremely narrow tube inside of a glass rod. A reserve of liquid, or "bulbs," just at thermometer's base supplies the liquid to the tube. Measurements of body temperature can be used to identify diseases. Additionally, it can monitor how effectively the medication is working. A fever is just a rise in body temperature.

V₁=185 ml

T₁ = 52 + 273 = 325 K

V₂ = 240 ml

The final temperature is necessary.

Charles' Rule

The relationship between the gas volume and temperature is linear so when gas pressure is constant.

V₁/T₁=V₂/T₂

Input the value :

T₂ = V₂T₁/V₁

T₂ = 240 x 325 / 185

T₂ = 421.621 K

To know more about temperature visit:

brainly.com/question/21275809

#SPJ1

Alpha decay of Radium-226:

226Ra → 222Rn + 4He

Beta decay of Radium-226:

226Ra → 226Ac + 0e + v

Alpha decay is a type of radioactive decay in which a heavy nucleus emits an alpha particle, which consists of two protons and two neutrons, effectively reducing the atomic number of the nucleus by two and transforming it into a different element.

Beta decay is a type of radioactive decay in which a nucleus emits a beta particle, which is an electron or a positron, and transforms into a different isotope. This changes the atomic number of the nucleus by one.

From the question given the balanced nuclear equations are:

Alpha decay of Radium-226:

226Ra → 222Rn + 4He

Beta decay of Radium-226:

226Ra → 226Ac + 0e + v

Learn more on radioactivity here https://brainly.com/question/2320811

#SPJ1

Neutralization of Strong Acids and Strong Bases.The pH is neutral when a strong acid and a strong base completely neutralise one another.

When the pH is neutral, it means that it is 7.01 at 25 oC. Equal amounts of OH and H3O+ are present at this stage of neutralisation. NaOH is not in excess.In a strong acid-strong base titration, the reaction between the acid and base will result in a neutral solution. Hydronium (H+) and hydroxide (OH-) ions will combine to produce water at the reaction's equivalence point, which will result in a pH of 7. Because both the acid and base completely ionise, the enthalpy of neutralisation for every strong acid and strong base is always constant, or 57.1 kJ. An aqueous solution in which an acid and a base react to create salt and water is known as a neutralisation reaction. Salt is the name for the reaction product, which is sodium chloride in aqueous form. An acidic anion and a cation produced from a base make up a salt, an ionic compound.

Learn more about Acids here:

https://brainly.com/question/14072179

#SPJ4

The adjustment that would result in the gas's volume doubling, assuming the gas is maintained at constant pressure, is option B: raising the temperature from 300 K to 600 K.

A key idea in physics is pressure, which is measured as the amount of force per unit area acting perpendicular to a surface. The pascal (Pa), which is equal to 1 newton per square metre, is the unit of pressure in the SI system. P is for pressure. F is the force that is delivered perpendicular to the surface (normally), and. The amount of force acting perpendicular to a unit area is referred to as pressure. The formula for pressure in mathematics is P=F/A, where P stands for pressure, F for force, and A for the area under consideration. Time is saved. Work "expands to cover the time available for its completion," according to Parkinson's Law.

Learn more about pressure here:

https://brainly.com/question/16649792

#SPJ4

There is no inherent correlation between the accuracy of a particular piece of glassware and its ease of use. The accuracy of a piece of glassware depends on various factors such as its design, manufacturing, and the conditions under which it is used, such as temperature and atmospheric pressure.

Ease of use, on the other hand, depends on factors such as the design of the glassware, its size, and the volume of liquid it can hold. For example, a beaker is typically larger and easier to handle than a pipet or buret, but its accuracy may be less precise due to the wide rim and large opening.

In laboratory settings, the choice of glassware depends on the specific requirements of the experiment. For precise measurements of small volumes of liquid, a pipet or buret is more appropriate because of their high accuracy. However, for routine tasks such as mixing and transferring larger volumes of liquid, a beaker may be more appropriate because of its ease of use.It is also important to note that in some experiments, the accuracy of the measurement is more critical than ease of use, while in others, ease of use is more important than accuracy. The choice of glassware depends on the specific requirements of the experiment and the desired outcome.

Learn more about correlation between the accuracy here:

https://brainly.com/question/29219559

#SPJ4