A 2.80 μf capacitor is charged to 500 v and a 3.80 μfcapacitor is charged to 520 V. What will be the charge on each capacitor?

Two capacitors of 6.00 f and 8.00 f are connected in parallel. The combination is then connected in series with a 12.0-v battery and a 14.0- f capacitor. We have to find the equivalent capacitance.

To find the equivalent capacitance of the given circuit, which includes two capacitors of 6.00 F and 8.00 F connected in parallel, and then the combination connected in series with a 12.0-V battery and a 14.0-F capacitor, follow these steps:

Step 1: Calculate the capacitance of the parallel combination of the 6.00 F and 8.00 F capacitors using the formula for parallel capacitance:
C_parallel = C1 + C2
C_parallel = 6.00 F + 8.00 F = 14.00 F

Step 2: Calculate the equivalent capacitance of the entire circuit, which includes the 14.00 F parallel combination connected in series with the 14.0 F capacitor. Use the formula for series capacitance:
1/C_equivalent = 1/C_parallel + 1/C3
1/C_equivalent = 1/14.00 F + 1/14.0 F

Step 3: Solve for C_equivalent:
1/C_equivalent = 2/14 F
C_equivalent = 14 F / 2
C_equivalent = 7.00 F

The equivalent capacitance of the given circuit is 7.00 F.

Learn more about capacitors at: https://brainly.com/question/21851402

#SPJ11

Part A: The electron drift speed in a 70mV/m electric field is approximately 2.14 × 10⁻⁵ m/s.

Part B: To calculate the time it takes for an electron to move 1.0 m down the wire, we need to know the drift speed.

Part C: To determine the number of collisions, we need to know the mean time between collisions.

Part A: The drift speed of electrons in a conductor can be calculated using the formula v = μE, where v is the drift speed, μ is the electron mobility, and E is the electric field strength. Given the electric field strength of 70mV/m, we need to know the electron mobility for gold to calculate the drift speed. Without that information, a precise value cannot be determined.

Part B: To calculate the time it takes for an electron to move 1.0 m down the wire, we need to know the drift speed. Without the specific value of the drift speed, a precise time cannot be calculated.

Part C: To determine the number of collisions, we need to know the mean time between collisions. Given the mean time between collisions of 25fs, we can divide the total time it takes for the electron to move 1.0 m by the mean time between collisions. However, without the specific drift speed or other necessary information, a precise value cannot be calculated.

To learn more about electric field, here

https://brainly.com/question/11482745

#SPJ4

The complete question is:

The mean time between collisions for electrons in a gold wire is What is the electron drift speed in a 70mV/m electric field? 25fs, where 1fs=1 femtosecond =10⁻¹⁵ s. Express your answer with the appropriate units.

Part B How many minutes does it take for an electron to move 1.0 m down the wire? Express your answer in minutes. The mean time between collisions for electrons in a gold wire is How many minutes does it take for an electron to move 1.0 m down the wire? 25fs, where 1fs=1 femtosecond =10⁻¹⁵ s. Express your answer in minutes.

Part C How many times does the electron collide with an ion while moving this distance?

The mass of the iron is 0.08333 kg. The heat required to raise the temperature of an equal mass of water by the same amount is 0.07803 kJ. The mass of the iron is much smaller than that of an equal mass of water, even though the temperature rise is the same. Option 2) is the correct explanation for the difference in the results for Parts A and B.

A) To determine the mass of the iron, we can use the formula:

q = mcΔT

Where q is the heat added, m is the mass, c is the specific heat capacity of iron, and ΔT is the temperature change.

Rearranging the formula, we get:

m = q / cΔT

Substituting the given values, we get:

m = 4000 J / (0.45 J/g⋅∘C × 22.0 ∘C) = 83.33 g = 0.08333 kg

Therefore, the mass of the iron is 0.08333 kg.

B) To calculate the heat required to raise the temperature of an equal mass of water by the same amount, we can use the same formula:

q = mcΔT

However, we need to use the specific heat capacity of water, which is 4.18 J/g⋅∘C.

Substituting the given values, we get:

q = (0.08333 kg) × (4.18 J/g⋅∘C) × (22.0 ∘C) = 78.03 J = 0.07803 kJ

Therefore, the heat required to raise the temperature of an equal mass of water by the same amount is 0.07803 kJ.

C) The difference in the results for Parts A and B is explained by the specific heat capacity of the substances. Specific heat capacity is the amount of heat required to raise the temperature of 1 gram of a substance by 1 degree Celsius. Water has a higher specific heat capacity than iron, meaning it requires more heat to raise its temperature by the same amount as iron. Therefore, a smaller amount of heat is required to raise the temperature of iron compared to water. This is why the mass of the iron is much smaller than that of an equal mass of water, even though the temperature rise is the same. Option 2) is the correct explanation for the difference in the results for Parts A and B.

Learn more about temperature  here:-

https://brainly.com/question/30898098

#SPJ11

The angle between the first and second interference minima for light of wavelength 485 nm passing through a single slit of width 8.32 x 10^-6 m is approximately 0.034 degrees.

This can be calculated using the formula θ = λ / (m * d), where λ is the wavelength, m is the order of the minimum, and d is the slit width. The formula for the angle θ between interference minima in a single slit diffraction pattern is given by θ = λ / (m * d), where λ is the wavelength of light, m is the order of the minimum (1 for the first minimum, 2 for the second minimum, and so on), and d is the width of the slit. In this case, the wavelength is 485 nm (or 485 x 10^-9 m) and the slit width is 8.32 x 10^-6 m. Plugging these values into the formula, we get θ = (485 x 10^-9) / (2 * 8.32 x 10^-6), which simplifies to approximately 0.034 degrees.

learn more about wavelength here:

https://brainly.com/question/30133721

#SPJ11

The momentum of the muon is approximately 1.512 x 10⁻²¹ kg·m/s and its kinetic energy is approximately 3.003 x 10⁻¹¹ J.

To calculate the momentum and kinetic energy of a muon traveling at 0.999c, we can use the equations of special relativity.

First, let's calculate the momentum (p) of the muon:

Rest mass of muon (m₀) = 207 times the electron mass (mₑ)

The relativistic momentum equation is:

p = γ × m₀ × v

Where:

γ (gamma) = 1 / √(1 - (v² / c²)) is the Lorentz factor

v is the velocity of the muon (0.999c)

c is the speed of light

Substituting the values into the equation:

γ = 1 / √(1 - (0.999²))

γ ≈ 22.366

p = 22.366 × m₀ × v

Next, let's calculate the kinetic energy (KE) of the muon:

The relativistic kinetic energy equation is:

KE = (γ - 1) × m₀ × c²

Substituting the values into the equation:

KE = (22.366 - 1) × m₀ × c²

Now, we need to determine the value of the electron mass (mₑ) in order to calculate the momentum and kinetic energy. The electron mass is approximately 9.10938356 x 10⁻³¹ kg.

Substituting the values into the equations:

p = 22.366 × 207 × (9.10938356 x 10⁻³¹) × (0.999 × 3 x 10⁸)

p ≈ 1.512 x 10⁻²¹ kg·m/s

KE = (22.366 - 1) × 207 × (9.10938356 x 10⁻³¹) × (3 x 10⁸)²

KE ≈ 3.003 x 10⁻¹¹ J

You can learn more about momentum at: brainly.com/question/30677308

#SPJ11

The wind velocity is 42 mph and the speed of the plane in still air is 222 mph.

To solve this problem, you can use the following steps:

1. Let x represent the speed of the plane in still air, and y represent the wind velocity.
2. When flying with the wind, the total speed is (x + y) and when flying against the wind, the total speed is (x - y).
3. Write two equations based on the given information:
  a) (x + y) * 4 = 892
  b) (x - y) * 4 = 555
4. Solve these equations simultaneously:
  a) x + y = 223
  b) x - y = 139
5. Add the equations together:
  2x = 362
  x = 181
6. Substitute x back into one of the equations to find y:
  181 + y = 223
  y = 42

So, the wind velocity is 42 mph and the speed of the plane in still air is 181 mph.

To know more about equations click on below link:

https://brainly.com/question/29538993#

#SPJ11

Andrea's velocity range is likely to be non-zero, indicating she is not sitting at rest. The specific range of her velocity cannot be determined without additional information.

Andrea, with a mass of 55 kg, believes she is stationary in her 6.0 m-long dorm room while working on her physics homework. However, according to the laws of physics, she is not truly at rest. Due to the Earth's rotation, Andrea is actually moving with the rotation of the planet. The Earth's equatorial rotational speed is approximately 1670 km/h (465 m/s). Therefore, her velocity within her dorm room is likely to be within the range of -465 m/s to +465 m/s, depending on her specific location and the direction of rotation. It is essential to consider the Earth's rotation when determining the true velocity of an object seemingly at rest on its surface.

Learn more about Andrea's here:

https://brainly.com/question/31459209

#SPJ11

True.

Heating a sample too quickly in the melting point apparatus can result in an error with the melting point appearing lower than what the sample actually melts at.

This is because rapid heating can cause the sample to heat unevenly, leading to a distorted melting point.

The outer layer of the sample may appear to melt before the inner core has reached its melting point, causing the observed melting point to be lower than the actual melting point.

To obtain an accurate melting point, it is important to heat the sample slowly and uniformly to ensure that the entire sample reaches the same temperature.

To know more about True refer here

https://brainly.com/question/30589045#

#SPJ11

The electric potential at the origin due to the two charged particles is 1.54 x 10^10 N-m^2/C.

To calculate the electric potential at the origin, we first need to find the distance between the origin and each charged particle. Using the Pythagorean theorem, we get d1 = 65.5 cm and d2 = 0 cm. Next, we can use the formula V = kq/d, where k is Coulomb's constant, q is the net charge of each particle, and d is the distance from the particle to the point of interest (in this case, the origin).

Plugging in the values, we get V1 = -1.79 x 10^9 N-m^2/C and V2 = 3.08 x 10^10 N-m^2/C. The negative sign for V1 indicates that the particle creates a negative potential. Adding the two potentials together gives us the total electric potential at the origin: V = V1 + V2 = 1.54 x 10^10 N-m^2/C.

Learn more about electric potential here:

https://brainly.com/question/28444459

#SPJ11

The  standard cell potential for the given reaction is -0.559 V.

The relationship between the equilibrium constant and the standard cell potential is given by the Nernst equation:

E = E^o - (RT/nF) ln K

where E is the cell potential at any given condition, E^o is the standard cell potential, R is the gas constant, T is the temperature in Kelvin, n is the number of moles of electrons transferred, F is the Faraday constant, and ln K is the natural logarithm of the equilibrium constant.

At standard conditions (298 K, 1 atm, 1 M concentrations), the cell potential is equal to the standard cell potential. Therefore, we can use the Nernst equation to find the standard cell potential from the equilibrium constant:

E^o = E + (RT/nF) ln K

Since there are four electrons transferred in this reaction, n = 4. Substituting the values:

E^o = 0 + (8.314 J/mol*K)(298 K)/(4*96485 C/mol) ln (3.90x10^5)

E^o = -0.559 V

Therefore, the standard cell potential for the given reaction is -0.559 V.

Visit to know more about Standard cell potential:-

brainly.com/question/14115211

#SPJ11

The reading of the idealized ammeter will be affected by the internal resistance of the battery.

The internal resistance of a battery affects the total resistance of a circuit and can impact the reading of an idealized ammeter. To find the reading of the ammeter, one needs to use Ohm's Law (V=IR), where V is the voltage of the battery, I is the current flowing through the circuit, and R is the total resistance of the circuit (including the internal resistance of the battery). The equation can be rearranged to solve for the current (I=V/R). Once the current is found, it can be used to calculate the reading of the ammeter. Therefore, to find the reading of the idealized ammeter when the battery has an internal resistance of 3.46 ω, one needs to calculate the total resistance of the circuit (including the internal resistance), solve for the current, and then use that current to find the ammeter reading.

To know more about the ammeter visit:

https://brainly.com/question/16791630

#SPJ11

This problem can be solved by applying the principle of conservation of mass and energy. According to the principle of continuity, the mass flow rate of water through any cross-section of a pipe must be constant. Therefore, the mass flow rate at point A is equal to the mass flow rate at point B.

Let's denote the pressure and velocity of water at point A as P_A and V_A, respectively. Similarly, let P_B and V_B be the pressure and velocity of water at point B, respectively.

From the problem statement, we know that the diameter of the pipe at A is 30 mm and the diameter of the nozzle at B is 10 mm. Therefore, the cross-sectional area of the pipe at A is (π/4)(0.03^2) = 7.07 x 10^-4 m^2, and the cross-sectional area of the nozzle at B is (π/4)(0.01^2) = 7.85 x 10^-5 m^2.

Since the mass flow rate is constant, we can write:

We can rearrange this equation to solve for V_A:

To find the pressure at point A, we can apply the principle of conservation of energy. Neglecting losses due to friction, we can assume that the total mechanical energy of the water is conserved between points A and B. Therefore, we can write:

where ρ is the density of water and g is the acceleration due to gravity.

We can rearrange this equation to solve for P_A:

Plugging in the values we know, we get:

Therefore, the pressure at point A is 125.7 Pa lower than the pressure at point B.

Learn More About velocity at https://brainly.com/question/80295

#SPJ11

The moon is brightest during a full moon, when the Earth is between the sun and the moon, illuminating the entire visible face of the moon.

The moon appears brightest during a phenomenon known as the full moon, which occurs when the sun, Earth, and moon are in alignment, with the Earth positioned between the sun and the moon. During a full moon, the entire illuminated face of the moon is visible from Earth, making it appear brighter than during other phases when only a portion of the moon is illuminated. However, the brightness of the moon can also be affected by atmospheric conditions, such as haze, clouds, or pollution, which can cause the moon to appear dimmer. Additionally, the moon's distance from Earth can also affect its brightness, with the moon appearing brighter when it is closer to Earth during its perigee.

Learn more about full moon here:

https://brainly.com/question/15024267

#SPJ11

Therefore, the proton is moving with a velocity of 3.27 x 10^6 m/s after being accelerated through a potential difference of 4.5 x 10^6 V.

The kinetic energy of the proton can be calculated using the equation KE = qV, where q is the charge of the proton (1.6 x 10^-19 C) and V is the potential difference (4.5 x 10^6 V). Substituting these values gives KE = (1.6 x 10^-19 C) x (4.5 x 10^6 V) = 7.2 x 10^-13 J. Therefore, the kinetic energy acquired by the proton is 7.2 x 10^-13 J.
To calculate the velocity of the proton, we can use the equation KE = 0.5mv^2, where m is the mass of the proton (1.67 x 10^-27 kg) and v is the velocity we want to find. Rearranging the equation gives v = sqrt((2KE)/m). Substituting the value of KE we calculated earlier gives v = sqrt((2 x 7.2 x 10^-13 J) / (1.67 x 10^-27 kg)) = 3.27 x 10^6 m/s.

To know more about kinetic energy visit:

https://brainly.com/question/26472013

#SPJ11

The Earth moves at a uniform speed of approximately 29.8 kilometers per second (18.5 miles per second) around the Sun in a circular orbit with a radius of 1.50×1011 meters.

According to Kepler's laws of planetary motion, planets move in elliptical orbits around the Sun, but the Earth's orbit is nearly circular. The Earth's average orbital speed is approximately constant due to the conservation of angular momentum. By dividing the circumference of the Earth's orbit (2πr) by the time it takes to complete one orbit (approximately 365.25 days or 31,557,600 seconds), we can calculate the average speed. Thus, the Earth moves at an average speed of about 29.8 kilometers per second (or 18.5 miles per second) in its orbit around the Sun, covering a distance of approximately 940 million kilometers (584 million miles) each year.

learn more about speed here:

https://brainly.com/question/28224010

#SPJ11

Yes, the time difference between the cue and response termination is called response time.

Response time refers to the time it takes for an individual to process information presented to them and produce a response. This can vary depending on various factors such as the complexity of the task, the individual's cognitive abilities, and external distractions. In some cases, response time can be very short, such as in a reflexive reaction, while in other cases, it may be longer, such as when solving a complex problem. Overall, response time is an important measure of cognitive processing and can provide valuable insights into human behavior and performance.

Response time, also known as reaction time, refers to the period between the presentation of a stimulus (cue) and the end of the individual's reaction (response termination). It is used to measure the speed and efficiency of a person's cognitive and motor processes in various situations.

To know more about termination visit:-

https://brainly.com/question/30911594

#SPJ11

The longest wavelength that can be observed in the third order for the given transmission grating is approximately 3.42 × 10^(-5) cm (or 342 nm).

To determine the longest wavelength observed in the third order for a transmission grating, we can use the grating equation:

mλ = d sin(θ)

where:

m is the order of the spectrum (in this case, m = 3 for the third order),

λ is the wavelength of light,

d is the grating spacing (distance between adjacent slits), and

θ is the angle of diffraction.

In this case, we have a transmission grating with 7300 slits/cm, which means the grating spacing (d) is equal to 1/7300 cm.

Assuming normal incidence (θ = 0), the equation simplifies to:

mλ = d

Now, we can substitute the values:

3λ = 1/7300 cm

To find the longest wavelength, we need to find the maximum value of λ. Rearranging the equation, we have:

λ = (1/7300 cm) / 3

Calculating this, we get:

λ ≈ 3.42 × 10^(-5) cm

Therefore, the longest wavelength that can be observed in the third order for the given transmission grating is approximately 3.42 × 10^(-5) cm (or 342 nm).

Learn more about wavelength

brainly.com/question/31143857

#SPJ11

The probability that all five cards drawn are black is approximately 0.002641, or about 0.26%.

There are 26 black cards in the deck (13 clubs and 13 spades), and a total of 52 cards. So the probability of drawing a black card on the first draw is 26/52, or 1/2. Since we want all five cards drawn to be black, we need to calculate the probability of drawing a black card on each subsequent draw, given that the previous card was also black.

Since there are now 25 black cards left in the deck (out of a total of 51 cards remaining), the probability of drawing a black card on the second draw is 25/51. Using the same logic, the probability of drawing a black card on the third draw is 24/50, on the fourth draw is 23/49, and on the fifth draw is 22/48.

To find the probability of all five cards being black, we need to multiply the probability of drawing a black card on each draw together:

(1/2) x (25/51) x (24/50) x (23/49) x (22/48) = 0.002641

To know more about the Deck, here

https://brainly.com/question/17003060

#SPJ4

False. The body of a for loop does not necessarily need to contain one statement for each element of the iteration list. In a for loop, the body is executed once for each element in the iteration list.

However, the body can contain multiple statements, including conditional statements, function calls, or any other valid code. It is common to have multiple statements within the body of a for loop to perform different actions or computations for each iteration. The number of statements within the loop body depends on the specific requirements of the program and the desired functionality. The body of a for loop does not necessarily need to contain one statement for each element of the iteration list. In a for loop, the body is executed once for each element in the iteration list.

learn more about loop here:

https://brainly.com/question/17067964

#SPJ11

The angle of launch for the projectile to reach a maximum height of 70 m and land 100 m from the launch point, with no appreciable air resistance, is approximately 55.1 degrees.

The projectile motion of the hobbyist's launch can be analyzed using kinematic equations, considering both horizontal and vertical components. Given the maximum height (70 m) and horizontal range (100 m), we can determine the angle of launch (θ). The acceleration due to gravity (g) is -9.81 m/s².

First, we can calculate the time of flight (t) using the vertical motion:

1. h = Vi_y*t + 0.5*(-g)*t², where h = 70 m, Vi_y = initial vertical velocity
2. 70 = Vi_y*t + 0.5*(-9.81)*t²

Next, we determine the horizontal motion:

3. R = Vi_x*t, where R = 100 m, Vi_x = initial horizontal velocity

We know that Vi_x = Vi*cos(θ) and Vi_y = Vi*sin(θ), where Vi is the initial velocity. From equations 2 and 3, we can form the following equation:

4. tan(θ) = Vi_y / Vi_x = (100/70)

Using the inverse tangent function, we find the angle of launch:

θ = arctan(100/70) ≈ 55.1 degrees

Learn more about air resistance here:-

https://brainly.com/question/11019447

#SPJ11

It would take approximately 35.5 years in your time frame to travel to the star that is 68 light-years away from Earth, while for someone on Earth, it would take 68 years.

You have decided to travel to a star that is 68 light-years away from Earth, but you will be traveling at a speed that would make the distance appear only 30 light-years. This means that you will be traveling faster than the speed of light, which is not possible according to the laws of physics. However, for the sake of the question, we will assume that this is possible. Now, to calculate how long it would take you to make the trip, we need to use the concept of time dilation. Time dilation is the difference in the elapsed time measured by two observers, due to a relative velocity between them. In other words, time passes differently for an observer who is moving relative to another observer who is at rest.

In this scenario, you are the traveler who is moving at a high speed relative to Earth, which is at rest. Therefore, time would pass slower for you than it would for someone on Earth. To calculate the time it would take you to make the trip, we need to use the formula for time dilation:

t = t0 / √(1 - v^2/c^2)

Where:
t = time elapsed for the traveler
t0 = time elapsed for someone at rest (in this case, someone on Earth)
v = velocity of the traveler relative to Earth
c = speed of light

We know that the distance to the star is 30 light-years for you, but 68 light-years for someone on Earth. Therefore, we can calculate your velocity relative to Earth:
v = d/t
v = 30 light-years / t

We don't know the value of 't' yet, but we can calculate the value of 't0' using the distance of 68 light-years:
t0 = d/c
t0 = 68 light-years / c

Now we can substitute these values into the time dilation formula:
t = (68 light-years / c) / √(1 - (30 light-years / t)^2 / c^2)

Simplifying this equation would involve some complex algebra, but we can use a calculator to find the value of 't'. Plugging in the values, we get:
t ≈ 35.5 years

This means that it would take approximately 35.5 years in your time frame to travel to the star that is 68 light-years away from Earth, while for someone on Earth, it would take 68 years. Keep in mind that this calculation is based on the assumption that traveling faster than the speed of light is possible, which is not currently supported by our understanding of physics.

Learn more about speed

at https://brainly.com/question/7359669

#SPJ11

The highest order bright fringe that can be observed for red light (λ0 = 700 nm) with a diffraction grating of 480 lines per millimeter is 2.

To determine the highest order bright fringe for red light with a diffraction grating of 480 lines per millimeter, we will use the following equation:

mλ = d × sin(θ)

where:
- m is the order of the bright fringe
- λ is the wavelength of the light (700 nm for red light)
- d is the distance between the grating lines (1/480 mm)
- θ is the angle of diffraction

To find the highest order (m), we need to find the maximum value of sin(θ), which is 1. Rearranging the formula to solve for m:

m = d × sin(θ) / λ

Now, we can plug in the given values:

d = 1/480 mm = 1/480 × [tex]10^6[/tex] nm = 2083.33 nm (to keep the units consistent)
λ = 700 nm
sin(θ) = 1

m = (2083.33 nm ×1) / 700 nm
m ≈ 2.98

Since the order m must be an integer, we round down to the nearest whole number:

m = 2

The highest order bright fringe that can be observed for red light (λ0 = 700 nm) with a diffraction grating of 480 lines per millimeter is 2.

To know more about Red light refer here :

https://brainly.com/question/13393009

#SPJ11

The change in the photon's wavelength is 0.024 fm when it scatters from a free proton at rest and recoils at 90°.

The change in the photon's wavelength (in fm) can be calculated using the Compton scattering formula:

Δλ = h / (m_ec) * (1 - cosθ)

where:

h = Planck's constant (6.626 x 10^-34 J*s)

m_e = mass of electron (9.109 x 10^-31 kg)

c = speed of light (2.998 x 10^8 m/s)

θ = angle of scattering (90° in this case)

Plugging in the values:

Δλ = (6.626 x 10^-34 J*s) / [(9.109 x 10^-31 kg) x (2.998 x 10^8 m/s)] * (1 - cos90°)

   = 0.024 fm

Compton scattering is an inelastic scattering of a photon by a charged particle, resulting in a change in the photon's wavelength and direction.

The scattered photon has lower energy and longer wavelength than the incident photon, while the charged particle recoils with higher energy and momentum.

The degree of wavelength change depends on the angle of scattering and the mass of the charged particle. In this case, the photon is scattered by a proton at rest, resulting in a small change in the photon's wavelength.

To know more about "Photon's wavelength " refer here:

https://brainly.com/question/18415575#

#SPJ11

To determine the net change between the given values of the variable, we need to find the difference between the values of h(t) at t=5 and t=8. The net change between the given values of the variable t (5 and 8) for the function h(t) = 2t² - t is 75.

A function is a relation between input (in this case, t) and output (h(t)), which assigns each input value to a unique output value. In this problem, the function is h(t) = 2t² - t.

The net change refers to the difference between the output values of a function at two specific points. In this case, we need to find the net change between the given values of t, which are 5 and 8.

First, we need to find the output values for t = 5 and t = 8 by plugging these values into the function h(t) = 2t² - t:
For t = 5: h(5) = 2(5²) - 5 = 2(25) - 5 = 50 - 5 = 45
For t = 8: h(8) = 2(8²) - 8 = 2(64) - 8 = 128 - 8 = 120

Now, we can determine the net change between these output values by subtracting the output value at t = 5 from the output value at t = 8: Net Change = h(8) - h(5) = 120 - 45 = 75, Therefore, the net change between the given values of the variable t (5 and 8) for the function h(t) = 2t² - t is 75.

Know more about function here:

https://brainly.com/question/12431044

#SPJ11

The magnitude of the resultant force is 942.18 N, and the angle it makes with the larger force is 39.7°.

To solve this problem, we can use the following steps:

1. Calculate the magnitude of the resultant force using the law of cosines.

F_resultant^2 = F1^2 + F2^2 - 2 * F1 * F2 * cos(angle)

F_resultant^2 = (640 N)^2 + (410 N)^2 - 2 * (640 N) * (410 N) * cos(55°)

F_resultant^2 ≈ 276687

F_resultant ≈ 526 N

2. Calculate the angle between the resultant force and the larger force using the law of sines.

sin(angle) / F2 = sin(opposite_angle) / F_resultant

sin(angle) = (sin(opposite_angle) * F2) / F_resultant

sin(angle) = (sin(55°) * 410 N) / 526 N

angle ≈ 39.7°

So, the magnitude of the resultant force acting on the object is approximately 942.18 N, and it makes an angle of approximately 39.7° with a larger force of 640 N.

To know more about the resultant force, click here;

https://brainly.com/question/16380983

#SPJ11

After the collision between the 1.5 kg bowling pin and the 8 kg bowling ball, the bowling ball's speed can be calculated using the law of conservation of momentum. The speed of the bowling ball after the collision is approximately 6.8 m/s.

According to the law of conservation of momentum, the total momentum before the collision is equal to the total momentum after the collision. Mathematically, this can be represented as:

[tex]\(m_1 \cdot v_1 + m_2 \cdot v_2 = m_1 \cdot v_1' + m_2 \cdot v_2'\)[/tex]

Where:

[tex]\(m_1\)[/tex] and [tex]\(m_2\)[/tex] are the masses of the bowling pin and the bowling ball, respectively.

[tex]\(v_1\)[/tex] and [tex]\(v_2\)[/tex] are the initial velocities of the bowling pin and the bowling ball, respectively.

[tex]\(v_1'\)[/tex] and [tex]\(v_2'\)[/tex] are the final velocities of the bowling pin and the bowling ball, respectively.

Plugging in the given values, we have:

[tex]\(1.5 \, \text{kg} \cdot 6.8 \, \text{m/s} + 8 \, \text{kg} \cdot 0 \, \text{m/s} = 1.5 \, \text{kg} \cdot 3.0 \, \text{m/s} + 8 \, \text{kg} \cdot v_2'\)[/tex]

Simplifying the equation, we find:

[tex]\(10.2 \, \text{kg} \cdot \text{m/s} = 4.5 \, \text{kg} \cdot \text{m/s} + 8 \, \text{kg} \cdot v_2'\)[/tex]

Rearranging the equation to solve for [tex]\(v_2'\)[/tex], we get:

[tex]\(8 \, \text{kg} \cdot v_2' = 10.2 \, \text{kg} \cdot \text{m/s} - 4.5 \, \text{kg} \cdot \text{m/s}\) \\\(v_2' = \frac{{10.2 \, \text{kg} \cdot \text{m/s} - 4.5 \, \text{kg} \cdot \text{m/s}}}{{8 \, \text{kg}}}\)\\\(v_2' \approx 0.81 \, \text{m/s}\)[/tex]

Therefore, the speed of the bowling ball after the collision is approximately 0.81 m/s.

To learn more about momentum refer:

https://brainly.com/question/1042017

#SPJ11

The likelihood of mass wasting varies depending on different conditions.

The occurrence of mass wasting, which refers to the downslope movement of soil and rock under the force of gravity, is influenced by various conditions. These conditions can be matched in terms of their likelihood of causing mass wasting.

Learn more about mass wasting

brainly.com/question/29808442

#SPJ11

The smaller piston needs to be pushed approximately 176 meters to

raise the car by 2 meters

a. To determine the force needed to lift the car using the hydraulic lift,

we can use Pascal's law, which states that the pressure in a fluid is

transmitted equally in all directions.

The formula for calculating the force exerted by the hydraulic lift is:

Force = Pressure * Area

Given:

Area of the small piston (A₁) = 50 cm²

Area of the large piston (A₂) = 4400 cm²

Weight of the car (W) = 1400 kg (weight is equivalent to mass multiplied

by acceleration due to gravity, which is approximately 9.8 m/s²)

First, we need to find the pressure exerted by the small piston:

Pressure₁ = Force₁ / Area₁

Since the pressure is transmitted equally, we can equate the pressure in

the small piston to the pressure in the large piston:

Pressure₁ = Pressure₂

Force₁ / Area₁ = Force₂ / Area₂

Substituting the given values:

Force₁ / 50 cm² = W / 4400 cm²

Solving for Force₁:

Force₁ = (W / 4400 cm²) * 50 cm²

Converting cm² to m²:

Force₁ = (W / 4400) * 0.005 m²

Substituting the weight of the car:

Force₁ = (1400 kg / 4400) * 0.005 m²

Calculating the force:

Force₁ = 2.84 kN (rounded to two decimal places)

Approximately 2.84 kilonewtons of force needs to be applied to the

small piston to lift the car.

b. To determine how far the smaller piston needs to be pushed to raise

the car by 2 meters, we can use the concept of equal pressure in the

hydraulic system.

The ratio of the distances moved by the small piston (d₁) and the large

piston (d₂) is equal to the ratio of their respective areas:

d₁ / d₂ = A₂ / A₁

Substituting the given values:

d₁ / d₂ = 4400 cm² / 50 cm²

Simplifying:

d₁ / d₂ = 88

We know that d₂ is 2 meters. We can substitute this value and solve for d₁:

d₁ / 2 m = 88

d₁ = 88 * 2 m

d₁ = 176 m

To know more about Pascal's law refer here

https://brainly.com/question/29875098#

#SPJ11

To determine the mass of the box, we can use the given information about the applied force, the angle of the force, and the coefficients of static and kinetic friction. Let's go through the steps to calculate the mass:

1. Resolve the applied force into its vertical and horizontal components. The vertical component is given by Fv = F × sin(θ), where F is the magnitude of the force and θ is the angle above the horizontal. In this case, F = 18 N and θ = 28 degrees. Thus, Fv = 18 N × sin(28 degrees).

2. Determine the maximum force of static friction that can act on the box to prevent it from sliding down. The maximum static friction force (Fsf) is given by Fsf = μs × N, where μs is the coefficient of static friction and N is the normal force acting on the box. The normal force is equal to the weight of the box, which is given by N = mg, where m is the mass of the box and g is the acceleration due to gravity (approximately 9.8 m/s^2).

3. Set up the equilibrium condition in the vertical direction. The vertical forces acting on the box are the vertical component of the applied force (Fv) and the maximum static friction force (Fsf). The equilibrium condition states that the sum of the forces in the vertical direction must be zero. So, we have Fv - Fsf = 0.

4. Substitute the expressions from steps 1 and 2 into the equilibrium condition equation and solve for the mass (m). This will give us the mass of the box in kilograms.

After performing the calculations, you should obtain the mass of the box.

Learn more about kinetic friction here :-

https://brainly.com/question/30886698

#SPJ11

A 0.49-mm-wide slit is illuminated by light of wavelength 520 nm. The width of the central maximum on the screen is 2.12 mm.

The central maximum of a single-slit diffraction pattern is given by the equation

w = (λL)/w

Where w is the width of the slit, λ is the wavelength of light, and L is the distance between the slit and the screen.

Plugging in the given values, we get

w = (520 nm x 2.0 m)/0.49 mm = 2.12 mm

Therefore, the width of the central maximum on the screen is 2.12 mm.

To know more about width here

https://brainly.com/question/14703325

#SPJ4