A 1kg tub of frozen vanilla ice cream is left in the sun and melts. Identify the mass the ice cream after it has melted.

Four separate sets of protons are present in 1H NMR. Consequently, four signals are seen.

Each atom's nucleus houses a volt, a subatomic particle. The particle bears a positive electrical charge, like the particle, but goes in the opposite direction. The mass of a proton, if it were alone, would just be 1.673 1027 kilograms, or almost equivalent to the mass of a neutron.

One down quark with a charge of 13e and two up quarks with a charge of +23e make up a proton. Only roughly 1% of the mass of a proton comes from the rest weights of quarks.

To know more about proton visit:

https://brainly.com/question/1252435

#SPJ4

The volume of 223.5 gr C₂H₆ (ethane) would occupy = 166.5 liters.

We must first determine the molar volume of a gas and the molar mass of ethane in order to determine the volume in liters that contains 223.5 grams of ethane gas.

Then, in order to know, we will use dimensional analysis.

Any gas's molar volume = 22.414 L/mol STP

Find the molar mass of the gas C₂H₆ (ethane), as we need to know how many moles there are of it: Adding the individual elemental atomic masses results in:

2C = (2 x 12.01)

= 4.02 amu

6H = (6 x 1.008)

= 6.048 amu

C₂H₆ total = 30.07 amu

The same quantity can be used to determine how many grams there are in a mole of ethane. Simply convert amu to g/mole to determine that 30.07 grams of ethane are required to produce 1 mole of ethane, or 30.07g/mole.

Ethane gas weighs 223.5 grams total.

Divide by the molar mass to determine the number of moles that equals:

(7.433 moles) = (223.5g ethane)/(30.07 g/mole) C₂H₆

"1 mole of any gas at standard temperature and pressure (STP at 273 K and 1 atm) occupies a volume of 22.4 L."

At STP: 7.433 moles of ethane x 22.4 liters per mole

= 166.5 liters.

Learn more about volume of the gas here: https://brainly.com/question/29361538

#SPJ4

A cylinder of gas has a pressure of 4. 882 atm on one day, the temperature (in degrees celsius) on the previous day was 20 °C.

A unit called temperature is used to represent hotness or coolness on a variety of arbitrary scales. Additionally, it illustrates the transfer of heat energy organically.

We formula for,

[tex]\frac{P1}{T1} = \frac{P2}{T2}[/tex]

We have,

Day one's pressure is 4.882 atm.

The following day's pressure is 4.690 atm.

The next day, with a pressure of 4.690 atm, the temperature is 8 °C.

We convert the degree into Kelvin,

8 + 273 = 281 K

Putting the values in the equation

[tex]\frac{4.882}{T1} = \frac{4.690}{281}[/tex]

We get, T1 = 292.5K

293 K converting into Celsius

293 - 273 = 20 °C

Thus, the temperature on the previous day is 20 °C.

Learn more about Temperature questions:

https://brainly.com/question/15694310

#SPJ4

The answer is C. Since C lacks any atoms that can serve as electron transfer nuclei, it cannot be a permitted contributing structure.

CH2 is positioned using oxygen's CH in the first structure. The use of current and electron mobility to read this structure is not permitted. We have given them an additional two CH since they will demand them. The negative kid will be transferred electronically here. This structure is better suited to the entire portion of three H and double bonds. The H three N double bond is the proper structure. And they'll continue. So, in the all figures we can say that C is not a permissible contributing structure.

To learn more about oxygen click here https://brainly.com/question/2272415

#SPJ4

1. To identify the proper order, take note of the ions present in the reactants. 2. Think about various cation-anion combinations. 3. Use the solubility criterion to determine whether one of the combinations produces an insoluble salt.

Cations are ions that are positively charged. Anions are the name for negatively charged ions. Ions are charged atoms or molecules. If one or more of an atom's electrons are lost, it will transform from a balanced atom into a positively charged cation. If an atom adds one or more electrons, it will transform from a balanced atom into a negatively charged anion. Ions come in the form of anions and cations. Because of the contrast between their electrical charges, they are drawn to one another. A cation repels other cations, whereas an anion repels another anion. An anion is an ion that has gained one or more electrons and a net negative charge.

Learn more about Ions here:

https://brainly.com/question/1488567

#SPJ4

The skeletal structure of (CH3)3CCH(CH3)CH2CH2CH3 in drawn below.

The skeletal structure of (CH3)3CCH(CH3)CH2CH2CH3 refers to the arrangement of the carbon and hydrogen atoms in the molecule, excluding any non-essential atoms such as hydrogens bonded to nitrogens. The molecule has a total of 17 carbon atoms and 33 hydrogen atoms. The carbon skeleton consists of a linear chain of 9 carbon atoms, with 3 methyl groups (CH3) attached to the first, third, and seventh carbon atoms, and a branched chain of 8 carbon atoms attached to the ninth carbon atom. The branched chain consists of a propyl group (CH2CH2CH3) and a vinyl group (CH=CH2). This is the skeletal structure of (CH3)3CCH(CH3)CH2CH2CH3.

Learn more about skeletal structure:

brainly.com/question/29165067

#SPJ4

To properly remove gloves, first, pull the gloves by the fingertips and then, pull on the outside of the glove on 1 side of the hand and remove it. Then insert a finger that has been removed from the glove between the interior edge of the second glove and the skin, and remove the second glove.

Sterile surgical gloves are gloves that are usually used by medical personnel to avoid patient droplets. The purpose of using Handscoon is to prevent cross-infection and prevent transmission of germs, used for surgical and surgical purposes.

When wearing and removing gloves, of course, there are special steps to avoid the spread of bacteria. The steps for removing gloves are:

First, pull the gloves by the fingertips and then, pull on the outside of the glove on 1 side of the hand and remove it. Then insert a finger that has been removed from the glove between the interior edge of the second glove and the skin, and remove the second glove.

Learn more about preparing to apply sterile gloves here :

https://brainly.com/question/28484317

#SPJ4

When the solvent molecules and the solute molecules mixes together this process is usually the exothermic process.

The interaction of the solvent molecules and the solute molecules is exothermic process as  the bonds are formed. When the  solute molecules form the bonds with the solvent molecules , the heat releases and in the process where the is released are called as the exothermic process. The solution is the  homogeneous mixture that consist of the solute that is dissolved into the solvent.

The mixing of the solvent molecules and the solute molecules are known as the solvation. Solvation can be exothermic process or the endothermic process depends on the nature of solute and the solvent.

To learn more about solvent molecules here

https://brainly.com/question/15217325

#SPJ4

There are 6.02 x  [tex]10^{24}[/tex] atoms of carbon in 5 moles of ethane.

We can see from the formula of ethane that each molecule has 2 carbon atoms so

1 mole of ethane = 2 moles of carbon atom

5 moles of ethane = 5  x 2 = 10 moles of carbon atom

Avogadro number =  6.02 x [tex]10^{23}[/tex]

Avogadro predicted that identical volumes of any two gases with comparable temperatures and weights must hold an equivalent number of particles in order for this to be true. Only if there were a distinction between atoms and molecules and certain elements, like nitrogen, genuinely existed as molecules, could this law be proven to be true. Given that Avogadro lacked terminology like "molecule" to describe his hypothesis and that his ideas encountered resistance from people like John Dalton, among others, Another chemist, Stanislao Cannizzaro, was required to give Avogadro's theories the attention they deserved. Avogadro had already passed away by the time their concepts acquired popularity.

No. of carbon atoms in 10 moles of carbon =  10 x  Avogadro number

                                                                        =  10 x  6.02 x [tex]10^{23}[/tex]

                                                                        =  6.02 x  [tex]10^{24}[/tex] atoms of carbon

To Know more about Avogadro Number

brainly.com/question/29732984

#SPJ4

The correct answer is C. Persistence measures how long a chemical remains in its present state in an area and, therefore, how long it might be a health concern.

Knowledge about the persistence of a chemical is important when considering its toxicity because it determines the length of time that the chemical will remain in the environment and potentially have a negative impact on human health and the environment. Persistence refers to how long a chemical remains in its present state, whether it be in soil, water, or air.

If a chemical has high persistence, it means that it is resistant to degradation and will remain in the environment for an extended period of time. This increases the potential for the chemical to accumulate in living organisms and cause harm.

On the other hand, if a chemical has low persistence, it means that it is rapidly degraded and poses a lower risk to human health and the environment.

In conclusion, understanding the persistence of a chemical is important when considering its toxicity because it provides information about how long the chemical will remain in the environment and potentially pose a threat to human health and the environment.

to know more about organic compund refer here

https://brainly.com/question/10504103#

#SPJ11

There are 3 C-H bonds, 1 C=O bond, 1 C-O bond, 1 O-H bond, and 1 C-C bond in the acetic acid Lewis structure. Trigonal planar and Tetrahedral geometry describe the molecular shapes of CH3COOH. The CH3COOH Lewis structure has a total of 16 bound pairs of electrons and 8 lone pairs of electrons.

We shall learn about the Lewis structure of acetic acid in this post.

Acetic acid, which is a straightforward organic or monocarboxylic acid formed of two carbons, two oxygens, and four hydrogens, has the chemical formula CH3COOH. It is a weak acid that also goes by the name ethanoic acid and comes out as a clear liquid with a pungent vinegar odour. It corrodes tissues as well as metals. Long-term contact to acetic acid can seriously irritate the eyes, skin, nose, throat, and other body parts. Acetic acid turns flammable and explosive at a temperature of 40 degrees Celsius. Acetic acid is a polar or protic solvent when it is liquid. In this article, acetic acid (CH3COOHLewis )'s structure or electron dot structure will be covered.

To know more about lewis structure please refer:

https://brainly.com/question/4144781

#SPJ4

Option B is the correct answer

What is mole fraction ?

The mole fraction of a component in a mixture is a measure of the relative amount of that component in the mixture, expressed as a fraction of the total number of moles of all components in the mixture. The mole fraction is a unitless quantity that is used to describe the composition of a mixture in terms of the number of moles of each component present.

The mole fraction of a component i in a mixture can be calculated as follows:

X_i = n_i / (n_1 + n_2 + ... + n_n)

where X_i is the mole fraction of component i, n_i is the number of moles of component i, and n_1, n_2, ..., n_n are the number of moles of each of the other components in the mixture.

Change all to moles

mol of MgCl2 = mass MgCl2  / MW of MgCl2

MW of MgCl2 = 95.211 g/mol

mol of MgCl2 = 15.8  /95.211 = 0.1659 mol of MgCl2

mol of Mg+2 = mol of MgCl2 = 0.1659

mol of Cl- = 2 * mol of MgCl2 = 2*0.1659 = 0.3318

mol of water = mass water /MW  water =  255/18 = 14.166 mol of water

total mol = mol of water + mol of Mg+2 + mol of Cl = 0.1659 +14.166 +0.3318= 14.6637

Then

mol fraction of Cl = mol of Cl- / total mol = 0.3318/14.6637 = 0.0226 = 0.023

To know more about mole fraction , click the given link below ;

https://brainly.com/question/14783710

#SPJ1

CnH2n

In the case of C4H8, because there are 4 carbon atoms and there are 8 hydrogen atoms the general formula must be CnH2n where n can be any number.

Simply put, 1 mole of solute will be dissolved in 1 litre of solution in a 1-M solution. You now are aware that your solution has a volume of 19.0 mL and a molarity of 0.150 M.

If the solution's pOH is known, it is possible to compute the hydroxide ion concentration, [OH -], in mol L-1.

The hydroxide ion concentration in mol L-1 is expressed as the negative logarithm (to base 10) of pOH. pOH = –log 10 [OH -] [OH -] is the amount of hydroxide ions in one mole of water (mol/L or M).

You can anticipate having fewer moles of calcium hydroxide in this sample than you would have in a complete litre of solution because the volume is significantly less than 1 L.

Therefore, 0.0079 moles of oh ions are present in 371.1 ml of 0.143 m calcium hydroxide.

Learn more about moles here:

https://brainly.com/question/29425602

#SPJ4

The atomic mass of element x is 66.5340 amu.

The atomic mass, also known as the atomic weight, is the weighted average of the masses of all the isotopes of an element, taking into account their natural abundance. It is expressed in atomic mass units (amu) and is used as an indication of the size of an atom.

The atomic mass of an element can be used to determine the relative masses of atoms and is used in chemical calculations and reactions.

The atomic mass of element x can be calculated by weighting the mass of each isotope by its natural abundance and summing them:

Atomic mass of element x = (mass of 65x * abundance of 65x) + (mass of 67x * abundance of 67x)

= (65.2666 amu * 27.42%) + (66.8273 amu * 72.58%)

= 18.0550 amu + 48.4790 amu

= 66.5340 amu

Therefore, the atomic mass of element x is 66.5340 amu.

To know more about atomic mass refer to:

brainly.com/question/5661976

#SPJ4

glycine (simple amino acids, simple carbohydrates, and simple proteins (nucleic acids)) was produced in the flasks at the conclusion of the miller-urey experiment.

The Miller-Urey experiment, was conducted to test the idea that organic molecules could be synthesized in a reducing environment. They assembled an atmosphere similar to what is thought to have existed on primitive Earth. They added a mixture of ammonia, methane, and hydrogen sulfide to the water. There was no oxygen. This was kept at a temperature just below 100°C and a spark passed through the gas mixture to simulate lightning. By the end of the week, 15% of the carbon (from methane) had been converted to simple organocarbon compounds.

To learn more about miller-urey experiment, refer:

https://brainly.com/question/12887279

#SPJ4

Yes, you could put sucrose in a glass of water to cause hydrolysis of the sucrose and make glucose and fructose. This process is called hydrolysis, where a sugar molecule is broken down into smaller sugar molecules using water.

In the case of sucrose, it is a disaccharide made up of glucose and fructose molecules joined together. When sucrose is added to water, the water molecules break the bond between glucose and fructose, causing them to separate. This results in the formation of glucose and fructose molecules in the water.

However, the hydrolysis of sucrose in water is not an immediate process. It requires the presence of an enzyme called sucrase, which is responsible for breaking down the sucrose into glucose and fructose. In the absence of sucrase, the hydrolysis of sucrose in water would be slow and incomplete.

To learn more about Glucose here:

https://brainly.com/question/397060#

#SPJ11

A solution where no additional solute will dissolve is known as a saturated solution. In this type of solution, an equilibrium exists between the dissolved solute and undissolved solute, meaning that the maximum amount of a given solute has been dissolved into the solvent.

Adding more solute will not change the concentration of the solution; the same amount of solute will remain in solution.

A saturated solution is a type of solution where the maximum amount of a given solute has been dissolved into the solvent. In this type of solution, an equilibrium exists between the dissolved solute and undissolved solute, meaning that no additional solute can be dissolved into the solvent. The amount of solute in the solution remains constant and does not increase, even if more solute is added. This is because the maximum amount of solute that can dissolve in the solvent has already been reached.

Learn more about solutions in equiluibrium:

https://brainly.com/question/30399396

#SPJ4

The molality of the ethanol in the solution is 5.89 mol/kg

The quantity of a material dissolved in a given mass of solvent is known as its molality (m), also known as molal concentration. The moles of a solute per kilogram of a solvent are how it is defined.

Molal concentration is another name for molality. It is a measurement of a solution's solute concentration. Solute and solvent are the two elements that make up the solution.

From the given information:

mass of ethanol = 14.6 g

mass of water = 53.6 g

The number of moles of ethanol is:

= 14.6 g/46.07 g/mol

= 0.316 mol of ethanol

There are 1000 g in 1 kg of water. In 53.6 g of water, there is 0.0536 kg of water.

Therefore, the molality of ethanol

=0.316/ 0.0536

=5.89 mol/ kg

To learn more about molality

https://brainly.com/question/14665570

#SPJ4

The balanced equation is: [tex]2C2H3Cl + 5O2 → 4CO2 + 2H2O + 2HCl[/tex]assuming the coefficient of HCl is 2.

Given the equation is: [tex]C2H3CI+ 02 = CO2+ H20+ HCI[/tex]

The number of atoms in each element on the left side of the equation must equal the number of atoms in each element on the right side of the equation for the equation to be considered balanced.

Dioxygen and Vinyl Chloride produce Carbon Dioxide, Water, and Hydrogen Chloride. Five moles of Dioxygen [O2] and two moles of Vinyl Chloride [C2H3Cl] react to produce two moles of Hydrogen Chloride [HCl], two moles of Water [H2O], and four moles of Carbon Dioxide [CO2]. It is a combustion as well as redox reaction which indicates an oxidation and reduction reaction at the same time.  

To learn more about HCl click here https://brainly.com/question/24177034

#SPJ4

Hypochlorites: Widespread water disinfection, as well as disinfection in restaurants, hospitals, food processing facilities, and households. Large-scale water disinfection using chlorine gas.

The removal of hazardous bacteria from surfaces or objects is accomplished through the process of disinfection. By bringing the number of hazardous germs to a level that is safe for human health, disinfection aims to stop the spread of infectious diseases. Hypochlorites, chlorine gas, and lodophors are just a few of the chemical and physical agents that can be employed to disinfect surfaces. The large-scale disinfection of drinking water, the disinfection of houses, hospitals, food processing facilities, dairies, restaurants, and other public places, as well as the antisepsis of wounds and tissues, are only a few applications for these agents. Use of the proper methods, enough time spent in contact with the disinfectant, and proper disinfectant handling and storage are all necessary for effective disinfection.

Learn more about Disinfectants here:

https://brainly.com/question/2934575

#SPJ4

The bond between Na and O in NaOCH3 is ionic. The bond between O and C in the molecule is polar covalent, and the bonds between C and H in the molecule are nonpolar covalent.

The NaOCH3 molecule is composed of three different types of bonds: Na-O, O-C, and C-H. The bond between sodium and oxygen is an ionic bond. Sodium is a metal and oxygen is a non-metal, and their electron configuration difference results in a transfer of electrons from sodium to oxygen. This results in the formation of sodium and oxygen ions, Na+ and O-, respectively. The O-C bond is a polar covalent bond, where the electron pair is shared between the two atoms but not equally. Oxygen is more electronegative than carbon, resulting in an uneven distribution of electrons, causing the bond to be polar. The C-H bond is a nonpolar covalent bond, as carbon and hydrogen have similar electronegativity values and thus the electron pair is shared equally between them.

Learn more about NaOCH3 here: brainly.com/question/30433999

#SPJ4

Complete question:

For NaOCH3, identify each bond as polar covalent, nonpolar covalent or ionic; NaO, OC, and CH.

As the heat is added into boiling water, its temperature remains constant.The heat source is employed to convert liquid water to vapor, which is the cause.Latent vaporization heat is the name given to this heat.

Boiling water's temperature does not rise when it is heated.Water boils at a temperature of about 100°C (lower at higher altitudes), and any additional heat (technically referred to as latent heat) would only cause water particles in the liquid phase to transition into the gas phase.

A pure water body at 100 degrees Celsius does not alter in temperature when added heat to it.The water instead starts to boil as a result.This kind of situation is referred to as a phase transition or change of condition.

To know more about vaporization visit:

https://brainly.com/question/14480429

#SPJ4

The standard enthalpy change (ΔHf∘) for the reaction of calcium hydroxide with carbon dioxide to form calcium carbonate and water is −171.3 kJ/mol.

The enthalpy change (ΔH) for a reaction can be calculated using the standard enthalpy of formation (ΔHf∘) of the reactants and products.

The equation for the reaction is:

Ca(OH)2(s) + CO2(g) → CaCO3(s) + H2O(l)

The standard enthalpy change (ΔHf∘) for this reaction can be calculated as follows:

ΔHf∘ = ΔHf∘ (CaCO3) + ΔHf∘ (H2O) − ΔHf∘ (Ca(OH)2) − ΔHf∘ (CO2)

Plugging in the values from the table,

ΔHf∘ = −1207.0 kJ/mol + −285.8 kJ/mol − (−986.1 kJ/mol) − (−393.5 kJ/mol)

= −171.3 kJ/mol

Therefore, the standard enthalpy change (ΔHf∘) for the reaction of calcium hydroxide with carbon dioxide to form calcium carbonate and water is −171.3 kJ/mol.

To learn more about enthalpy change:

https://brainly.com/question/16387742

#SPJ4

Answer:

The empirical formula : Na₂Cr₂O₇

Further explanation

Given

170 g sample contains :

29.84 g sodium, 67.49  g chromium, and 72.67 g oxygen

Required

The compound's empirical formula

Solution

mol ratio of elements :

Na : 29.84 : 23 g/mol = 1.297

Cr : 67.49 : 51,9961 g/mol = 1.297

O : 72.67 : 16 g/mol = 4.54

Divide by 1.297

Na : Cr : O = 1 : 1 : 3.5 = 2 : 2 : 7

Explanation:

The balanced chemical equation for the oxidation of borneol to camphor using sodium dichromate in acid is:

[tex]2C_1_0H_1_8O+16H^+10Cr_2O_7^2^- - > 2C_1_0H_1_6O+10Cr^+^3+8H_2O+16H^+[/tex]

To calculate the amount of sodium dichromate (Na2Cr2O7 * 2H2O) needed to oxidize 0.50 g of borneol, you can use the mole ratio of reactants. The balanced equation tells us that for every 1 mole of borneol, 10 moles of sodium dichromate are needed.

The molar mass of borneol is 154 g/mol, so 0.50 g is equal to 0.50/154 moles. To find the amount of sodium dichromate needed, multiply this mole amount by 10, then convert it to grams by multiplying by the molar mass of Na2Cr2O7 * 2H2O (298 g/mol).

To know more about chemical equation click on the link below:

https://brainly.com/question/30087623#

#SPJ11

When writing a correct formula for a compound we must balance the elements in the compound according to their oxidation state by using correct subscripts.

What are elements and compounds?

Pure chemical elements and compounds can be found in nature. An element is a substance made of the same type of atoms as a compound, whereas a compound is made of various elements mixed together in a specific ratio. The elements iron, copper, hydrogen, and oxygen are a few examples. Compounds include, for instance, salt and water (H2O) (Sodium Chloride - NaCl).

So when writing a correct formula for a compound we must balance the

elements in the compound according to their oxidation state by using correct subscripts.

To learn more about Compounds, here

https://brainly.com/question/13516179

#SPJ1

Water (H2O) is always involved in hydrolysis reactions.

Hydrolysis is a chemical reaction in which water is used to break a bond between two atoms or molecules.  In a hydrolysis reaction, water molecules are added to the reactants, with one molecule of water breaking apart into a hydrogen ion (H+) and a hydroxide ion (OH-). These ions then participate in the reaction, effectively breaking the bond between the two reactants and forming two new products.

Thus, water is always involved in hydrolysis reactions, serving as both the source of the reactive hydrogen and hydroxide ions and the solvent in which the reaction takes place.

You can learn more about hydrolysis reactions at

https://brainly.com/question/4352413

#SPJ4

The molar mass of NH₄ is 18 g/mole while that of compound of lithium bromide is 86.84 g/mole.

Molar mass of a compound or a molecule is defined as the mass of the elements which are present in it.The molar mass is considered to be a bulk quantity not a molecular quantity. It is often an average of the of the masses at many instances.

The molecular mass and formula mass are used as synonym for the molar mass.It does not depend on the amount of substance which is present in the sample.It has units of gram/mole.

Molar mass of  NH₄= 14+ 4= 18 g/mole while that of lithium bromide =6.941+ 79.904=86.84 g/mole.

Learn more about molar mass,here:

https://brainly.com/question/12127540

#SPJ1

Temperature and boiling point are directly related. In solutions, ΔTb = i×Kb×m where elevation in boiling point is directly related to molality as well.  

A substance's boiling point is the temperature at which it changes states from a liquid to a gas. This phase change occurs when the liquid's vapour pressure is equal to the atmospheric pressure and the temperature at which this occurs is known as the boiling point. At standard atmospheric pressure(1.01 bar), the normal boiling point of water is 100°C (100+273 = 373K). Temperature and boiling point are directly related. When the temperature of a substance rises, so does its vapour pressure. When the liquid's vapour pressure reaches atmospheric pressure, it begins to boil and turn into a gas. However, changes in atmospheric pressure can affect a substance's boiling point. Atmospheric pressure is lower than that at sea level at higher altitudes. Hence, water at high altitudes boils at lower than 100°C temperature, and in some cases, at room temperature.

To know more about boiling point, click here : https://brainly.com/question/1530966

#SPJ4