Answer:
312,497.5Joules
Explanation:
Work done = force × distance
W = FS
Get the force
F = ma
F = 1250×9.8
F = 12250N
Get the distances using the equation of motion
v² = u² +2gS
30² =20²+2(9.8)S
900 =400+19.6S
900-400 =19.6S
500 = 19.6S
S = 500/19.6
S = 25.51m
Get the work done
Work done = 12250×25.51
Workdone = 312,497.5Joules
Answer:
3.13 x 10^5 J
Explanation:
The work done increases the car's kinetic energy so that its new speed is 30 m/s. So, we set t, the net work required to increase the car's speed equal to the change in the car's kinetic energy.
Wnet = △K = Kf - Ki = 1/2mvf^2 - 1/2mvi^2 = 1/2m(vf^2-vi^2) = 1/2(1250kg)((30m/s)^2 - (20m/s)^2) = 3.13x10^5 J
If you Blow up a balloon, will the composition of Air inside the balloon changes? Why? Why not?
Answer:
it change by the pressure of the air and how its pulling the elastic even more
Explanation:
therefore it changes shape and has more differences than before sometimes the colour of it will go lighter if a lot of air and darker if not a lot
When the 5.0 kg cylinder fell 100 m, the final temperature of the water was °C and the change in temperature was °C.
When the 5.0 kg cylinder fell 500 m, the final temperature of the water was °C and the change in temperature was °C.
Answer:
26.17
1.17
30.86
5.86
Explanation:
said they were correct on my assignment
Certain neutron stars (extremely dense stars) are believed to be rotating at about 1 rev/s. If such a star has a radius of 15 km, what must be its minimum mass so that material on its surface remains in place during the rapid rotation
Answer:
1.9981 * 10^24 Kg
Explanation:
Given that
R = 15 * 10^3
ω = 1 rev/s = 2π rad/s
From;
g =GM/R^2 - Rω^2
If g = 0
M = R ^3ω^2/G
M = (15 * 10^3)^3 * (2π)^2/6.67 * 10^-11
M = 1.9981 * 10^24 Kg
A 700N mountain climber scales a 100m cliff. How much work is done by the mountain climber?
Answer:
70000N/m
Explanation:
Work is Force multiplied by Displacement.
Multiply 700 by 100 and you get 70000N/m
*Note: N is newtons and m is meters.
Answer: 7000N/m
Explanation: 700 x 100 = 7000
Let's say you got tired and you are now pushing with a force of 36 N. Find the acceleration of the box.
This question is incomplete, the complete question is;
A 13 kg box rests on the flat surface. The coefficient of static friction and coefficient of kinetic friction is μ_s = 0.450 and μ_k = 0.380 respectively.
Let's say you got tired and you are now pushing with a force of 36 N. Find the acceleration of the box.
Answer: the acceleration of the box is 0.9548 m/s² {backward}
Explanation:
Given that;
mass m = 13 kg
pushing the box with a force of 36 N
the acceleration of the box = ?
ones the box starts moving, kinetic frictional force starts acting.
so
f_k = μ_k × m × g
we substitute
f_k = 0.380 × 13 × 9.8
f_k = 48.412 N
force needed to keep it in motion is 48.412 N
so
Acceleration = Net Force / mass
Acceleration = (48.412 N - 36 N) / 13
Acceleration = 12.412 / 13
Acceleration = 0.9548 m/s² {backward}
Therefore, the acceleration of the box is 0.9548 m/s² {backward}
What is the most common frame of reference used by humans
Answer:
All measurements of motion will be compared to a frame of reference. Therefore, the most commonly used frame of reference is Earth itself, even though it moves.
Explanation:
Help please !
In sexual reproduction, why is fertilization necessary to produce an organism ?
1. Fertilization allows an organism to receive a complete set of chromosomes -one set each parent .
2. Fertilization is needed to make the cell bigger . A bigger cell leads to the development of an organism .
3. Fertilization allows an organism to reproduce asexually , making identical clones of itself.
4. Fertilization is needed so that the egg cell can obtain nutrients from the sperm cell. Without these nutrients , an organism cannot develop .
Answer:
1. Fertilization allows an organism to receive a complete set of chromosomes -one set each parent.
Explanation:
Which items in this image are electrically conductive?
Check all that apply
the power lines themselves
the wooden pole that supports the lines
the rubber soles on the worker's boots
the metal tools the worker uses
the wooden ladder leaning against the lines
all except the rubber boots.
The answers should be The power lines themselves and The metal tools the worker uses (the 1st and 4th choices).
(For anyone curious, the image I attached to this answer is the image given for this problem.)
A space expedition discovers a planetary system consisting of a massive star and several spherical planets. The planets all have the same uniform mass density. The orbit of each planet is circular. In the observed planetary system, Planet A orbits the central star at the distance of 2R and takes T hours to complete one revolution around the star. Planet B orbits the central star at the distance of R. Which of the following expressions is correct for the number of hours it takes Planet B to complete one revolution around the star?
a. 1/√8T
b. 1/2T
c. 1/√4T
d. 2T
e. √8T
Answer:
[tex]T_B=(\frac{T}{\sqrt{8}})[/tex]
Explanation:
Distance of Planet A from Central star 2R
Time of Resolution T_A=T
Distance of Planet B from orbit star R
Generally the equation for Kepler's law of periods is given by
[tex]\frac{T_A^2}{T_B^2}=\frac{R_A^3}{R_B^3}[/tex]
[tex]T_B^2=T_A^2 \frac{R_A^3}{R_B^3}[/tex]
[tex]T_B^2=T_A^2 (\frac{R_A}{R_B})^3[/tex]
[tex]T_B^2=T^2 (\frac{R}{2R})^3[/tex]
[tex]T_B^2=T^2 (\frac{1}{R})^3[/tex]
[tex]T_B^2=(\frac{T^2}{8})[/tex]
Therefore the following expressions is correct for the number of hours it takes Planet B to complete one revolution around the star
[tex]T_B=(\frac{T}{\sqrt{8}})[/tex]
The number of hours that it takes for planet B to complete one revolution around the star is : ( A ) ( [tex]\frac{T}{\sqrt{8} }[/tex] )
Given data :
Distance of Planet A from massive star = 2R
Time taken by Planet A to orbit the massive star = Tₐ
Distance of Planet B from massive star = R
Time taken by Planet B to orbit the massive star = T[tex]_{b}[/tex]
To determine the proper expression exhibiting the correct number of hours it will take for Planet B to complete a revolution
we will apply Kepler's law of periods
[tex]\frac{T^{2} _{a} }{T_{b} ^{2} } = \frac{R_{a} ^{3} }{R_{b} ^{3} }[/tex]
∴ [tex]T_{b} ^{2} = T_{a} ^{2} ( \frac{R_{a} }{R_{b} } )^{3}[/tex]
[tex]T_{b} ^{2} = T^2 ( 1/R)^3[/tex]
Hence T[tex]_{b}[/tex] = ( [tex]\frac{T}{\sqrt{8} }[/tex] )
There we can conclude that The number of hours that it takes for planet B to complete one revolution around the star is : ( A ) ( [tex]\frac{T}{\sqrt{8} }[/tex] )
Learn more about kepler law of periods : https://brainly.com/question/929044
A small lead ball, attached to a 1.10-m rope, is being whirled in a circle that lies in the vertical plane. The ball is whirled at a constant rate of three revolutions per second and is released on the upward part of the circular motion when it is 1.3 m above the ground. The ball travels straight upward. In the absence of air resistance, to what maximum height above the ground does the ball rise
Answer:
1.84 m
Explanation:
For the small lead ball to be balanced at the tip of the vertical circle just before it is released, the reaction force , N equal the weight of the lead ball W + the centripetal force, F. This normal reaction ,N also equals the tension T in the string.
So, T = mg + mrω² = ma where m = mass of small lead ball, g = acceleration due to gravity = 9.8 m/s², r = length of rope = 1.10 m and ω = angular speed of lead ball = 3 rev/s = 3 × 2π rad/s = 6π rad/s = 18.85 rad/s and a = acceleration of normal force. So,
a = g + rω²
= 9.8 m/s² + 1.10 m × (18.85 rad/s)²
= 9.8 m/s² + 390.85 m/s²
= 400.65 m/s²
Now, using v² = u² + 2a(h₂ - h₁) where u = initial velocity of ball = rω = 1.10 m × 18.85 rad/s = 20.74 m/s, v = final velocity of ball at maximum height = 0 m/s (since the ball is stationary at maximum height), a = acceleration of small lead ball = -400.65 m/s² (negative since it is in the downward direction of the tension), h₁ = initial position of lead ball above the ground = 1.3 m and h₂ = final position of lead ball above the ground = unknown.
v² = u² + 2a(h₂ - h₁)
So, v² - u² = 2a(h₂ - h₁)
h₂ - h₁ = (v² - u²)/2a
h₂ = h₁ + (v² - u²)/2a
substituting the values of the variables into the equation, we have
h₂ = 1.3 m + ((0 m/s)² - (20.74 m/s)²)/2(-400.65 m/s²)
h₂ = 1.3 m + [-430.15 (m/s)²]/-801.3 m/s²
h₂ = 1.3 m + 0.54 m
h₂ = 1.84 m
What substances cannot be separated by steam distillation?
What do scientists know about the future of the universe?
what dark matter is made of
why the expansion of the universe is accelerating
that stars will eventually burn out causing the universe to become cold and dark
that galaxies spin much slower than they should based on visible matter
Answer:
B. Why the expansion of the universe is accelerating
Explanation:
possibly pretty sure if not right then the answer is A. What dark matter is made of hope this helps please mark brainiest only answer plz
Why the expansion of the universe is accelerating is what scientists know
about the future of the universe.
Scientists have observed that radiation emitted by the galaxies have shifted
towards the red end of the electromagnetic spectrum. This means that there
has been an increase in the wavelength for this to occur.
This tells us that the universe is expanding which was why the wavelength
of the emission spectra experienced a shift or stretch.
Read more on https://brainly.com/question/9981218
What is the unit vector along ⃗ = hat − hat + hat ?
Answer:
1 hat
Explanation:
Gravity does 207 N of work when a 45 N object falls to the
ground. From what height does the object fall?
Answer: 4.6
Explanation:
Answer:
4.6
Explanation:
Why could it be argued that the respiratory system is most critical to sustaining life?
Explanation:
Energy is the most important ingredient for life. Organisms use energy in diverse ways. Scientifically, energy is defined as the ability to do work. Without this ability, organisms would not exist.
So, the most important process is one that can furnish the body with energy.
The respiratory system happens to be the one that furnishes the body with energy. During respiration, the energy needs of the body is met by series of processes. Oxygen is taken in and use to liberate calories from chemical substances packed with energy. So, without respiration, the bodily energy demands will not be met.Two carts connected by a 0.50 m spring hit a wall, compressing the spring to 0.25 m. The spring constant k is
N
200
m
What is the elastic potential energy stored from the spring's compression?
Khan aced my?
Answer:
6.25J
Explanation:
bc that’s the answer on khan
Two carts connected by a 0.50 m spring hit a wall, compressing the spring to 0.25 m. If the spring constant k is 200 N/m, then the elastic potential energy stored from the spring's compression would be 6.25 J.
What is the spring constant?The spring constant is used to define the stiffness of the spring, the greater the value of the spring constant stiffer the spring and it is more difficult to stretch the spring.
The mathematical relation for calculating the spring constant is as follows
F = - Kx
as given in the problem Two carts connected by a 0.50 m spring hit a wall, compressing the spring to 0.25 m. If the spring constant k is 200 N/m,
The elastic potential energy stored is given by
E = 1/2 kx²
=0.5×200×0.25²
=6.25 J
Thus, the elastic potential energy stored from the spring's compression would be 6.25 J.
Learn more about spring constant here
brainly.com/question/14670501
#SPJ2
A light ray in glass (n=1.5) hits the air-glass interface at an angle of 10 degrees from the normal. What angle from the normal is the light ray in the air (n=1.0)? (You can use the small angle approximation.)
Answer:
The angle from the normal is 15.1°.
Explanation:
We can find the angle by using Snell's law:
[tex] n_{1}sin(\theta_{1}) = n_{2}sin(\theta_{2}) [/tex]
Where:
n₁: is the first medium (glass) = 1.5
n₂: is the second medium (air) = 1.0
θ₁: is the first angle (in the glass) = 10°
θ₂: is the second angle (in the air) =?
[tex] \theta_{2} = arcsin(\frac{n_{1}sin(\theta_{1})}{n_{2}}) = arcsin(\frac{1.5*sin(10)}{1.0}) = 15.1 ^{\circ} [/tex]
Therefore, the angle from the normal is 15.1°.
I hope it helps you!
why is there a difference between potential and kinetic energy?
Potential energy is stored energy because it has the potential to do something which laters turns into kinetic energy which is the moving energy.
Describe what determines magnetism and how an electromagnet works.
Answer:
Magnetism is the force exerted by magnets when they attract or repel each other
hope it helps you:)
An object with velocity 141 ft/s has a kinetic energy of 1558.71 ft∙lbf, on a planet whose gravity is 31.5 ft/s2. What is its mass in pounds
Answer:
The mass of the object is 5.045 lbm.
Explanation:
Given;
kinetic energy of the object, K.E = 1558.71 ft.lbf
velocity of the object, V = 141 ft/s
The kinetic energy of the object is calculated as;
[tex]K.E = \frac{1}{2} mV^2\\\\mV^2 = 2K.E\\\\m = \frac{2K.E}{V^2} \\\\1 \ lbf = 32.174 \ lbm.ft/s^2\\\\m = \frac{2 \ \times \ 1558.71 \ ft.lbf \ \times \ 32.174 \ lbm.ft/s^2 }{(141 \ ft/s)2 \ \ \times \ \ \ \ 1 \ lbf\ }[/tex]
[tex]m = \frac{(2 \ \times \ 1558.71 \ \times \ 32.174) \ lbm.ft^2/s^2 }{(141 )^2\ ft^2/s^2 }\\\\m = \frac{(2 \ \times \ 1558.71 \ \times \ 32.174) \ lbm }{(141 )^2 }\\\\m = 5.045 \ lbm[/tex]
Therefore, the mass of the object is 5.045 lbm.
PLEASE ITS AN Emergency IF ITS RIGHT I WILL GIVE BRAINLIEST
Answer:
all of those are pisitions
Explanation:
A working fluid enters a steady flow system with a velocity of 30m/s and leaves at
140m/s. The mass flow rate is 9 kg/s. The properties of the fluid entry are 13.8 bar,
0.122 m3
/kg, and internal energy 42.2 kJ/kg, and exit properties are 1.035 bar, 0.805
m3
/kg and internal energy 208 kJ/kg. Determine the work transfer in kW from the
system
Answer:
Pretty sure it’s A
Explanation:
Would ike brainliest
Block A of mass M is at rest and attached to the top of a spring. The block compresses the spring a distance d from its uncompressed length at equilibrium. Block B of mass 2M is released from rest at a height h above block A . The two blocks collide and stick together. Express all answers in terms of d , h , M , and physical constants, as appropriate.
Required:
a. Derive an expression for the spring constant k of the spring.
b. Derive an expression for the speed of block B just before it collides with block A.
c. Derive an expression for the speed of the blocks immediately after the collision.
d. Derive an expression for the maximum compression of the spring after the collision.
e. If the collision between the blocks was elastic, would the maximum compression of the spring be greater than, less than, or equal to that found in part (d)? Justify your answer.
Answer:
a) k = Mg / d , b) v = √2gh , c) v_{f} = [tex]\frac{2}{3} \ \sqrt{2gh}[/tex], d) x² + 6d x - [tex]\frac{8}{3}[/tex] dh = 0
e)the spring must compress a greater distance.
Explanation:
a) when the block of mass M is placed on the spring, we have an equilibrium condition,
∑ F = 0
[tex]F_{e}[/tex]- W = 0
k d = Mg
k = Mg / d
b) let's use the concepts of energy to find the velocity of the block just before the collision
starting point. Position when released
Em₀ = U = m g h
lowest point. Right at the point of shock
[tex]Em_{f}[/tex] = K = ½ m v²2
as there is no friction, energy is conserved
Em₀ = Em_{f}
mg h = ½ m v²
v = √2gh
c) The velocity of the two blocks after the collision, we define a system formed by the two blocks, in such a way that the forces during the collision are internal and the moment is conserved
initial instant. Just before the crash
p₀ = 2M v + M 0
final instant. Just after the shock, before the spring compression begins
p_{f} = (2M + M) v_{f}
the moment is preserved
p₀ = p_{f}
2M v = 3M v_{f}
v_{f} = ⅔ v
v_{f} = [tex]\frac{2}{3} \ \sqrt{2gh}[/tex]
d) now we work with the joined system after the collision, let's use the concepts of energy
starting point. After shock, before beginning spring compression
Em₀ = K = ½ (3M) [tex]v_{f}^2[/tex]
Em₀ = 3/2 M (\frac{2}{3} \ \sqrt{2gh})²
Em₀ = 4/3 M gh
final point. With the spring fully compressed
Em_f = K_e + U = ½ k x² + (3M) g x
in this case we have taken the zero of gravitational potential energy at the point where the blocks collide, as there is no friction, the energy is conserved
Em₀ = Em_f
4/3 M g h = ½ k x² + 3M g x
½ k x² + 3Mg x - 4/3 Mgh = 0
we substitute the expression for k
[tex]\frac{1}{2}[/tex] ([tex]\frac{Mg}{d}[/tex]) x² + 3Mg x - [tex]\frac{4}{3}[/tex] Mgh = 0
[tex]\frac{x^{2} }{2d}[/tex] + 3 x - [tex]\frac{4}{3}[/tex]h = 0
to find the value of the spring compression, the second degree equation must be solved
x² + 6d x - [tex]\frac{8}{3}[/tex] dh = 0
x = [-6d ±[tex]\sqrt{(36 d^{2} - 4 \frac{8}{3} dh) }[/tex] ] / 2
x = [-6d ± 6d [tex]\sqrt{ 1 - \frac{32}{3 \ 36} \ \frac{h}{d} }[/tex] ]/2
x = 3d ( -1± [tex]\sqrt{ 1 - 0.296 \frac{h}{d} }[/tex] )
e) If the collision elastic force would not lose any part of the kinetic energy during the collision, therefore the speed of the block of mass M would be much higher and therefore the spring must compress a greater distance.
jack goes an average of 40 m/min. How far does he jog in 1.2 hours?
Answer:
2880 (m)
Explanation:
1. the formula of distance is: L=v*t, where L - the required distance; v - average velocity; t - elapsed time.
2. if t=1.2 hours, it means 72 minutes, then
3. L=40*72=2880 m.
Please could you help me. A race car travels along a straight length of track at 65 m/s. The race car and driver have a
combined mass of 580 kg. Calculate the total energy in the kinetic energy store of the car and
driver. Make sure you give the correct symbol for the unit. *
Answer:
1.23×10⁶ J
Explanation:
From the question given above, the following data were obtained:
Velocity (v) = 65 m/s
Mass (m) = 580 Kg
Kinetic energy (KE) =?
The kinetic energy can be obtained by using the following formula :
KE = ½mv²
Where:
KE => is the kinetic energy.
m => is the mass
v => is the velocity
With the above formula, we can obtain the kinetic energy as follow:
Velocity (v) = 65 m/s
Mass (m) = 580 Kg
Kinetic energy (KE) =?
KE = ½mv²
KE = ½ × 580 × 65²
KE= 290 × 4225
KE = 1.23×10⁶ J
Thus, the kinetic energy is 1.23×10⁶ J
Humans have three types of cone cells in their eyes, which are responsible for color vision. Each type absorbs a certain part of the visible spectrum. Suppose a particular cone cell absorbs light with a wavelength of . Calculate the frequency of this light.
Answer:
This question is incomplete
Explanation:
This question is incomplete because of the absence/omission of the wavelength but the completed question is attached below.
The formula for frequency is f = c/λ
where f is the frequency (unknown)
c is the speed of light (3.0 × 10⁸ m/s)
λ is the wavelength (599 nm)
f = (3 × 10⁸) ÷ 599
f = 500834.73 Hz or 5 × 10⁵ Hz
Type your answers to these 4 questions in the submission area.
1. What do you think a plate boundary is?
2. What is an earthquake?
3. What happens during an earthquake?
4. What do you think about the plates that make up Earth’s outer layer?
Convert 75.170 seconds into hours.
Answer:0.02088056
Explanation:
It is not possible to convert work entirely into heat. It is impossible to transfer heat from a cooler to a hotter body. The second law of thermodynamics is a consequence of the first law of thermodynamics. It is possible for heat to flow spontaneously from a hot body to a cold one or from a cold one to a hot one, depending on whether or not the process is reversible or irreversible. All of these statements are false.
Complete Question:
Which one of the following is a
true statement?
Group of answer choices.
A) The second law of thermodynamics is a consequence of the first law of thermodynamics.
B) It is possible for heat to flow spontaneously from a hot body to a cold one or from a cold one
to a hot one, depending on whether or not the process is reversible or irreversible.
C) It is not possible to convert work entirely into heat.
D) It is impossible to transfer heat from a cooler to a hotter body.
E) All of these statements are false.
Answer:
E) All of these statements are false.
Explanation:
All of the following statements are false;
I. The second law of thermodynamics is a consequence of the first law of thermodynamics. The second law of thermodynamics is about a physical quantity known as entropy while the first law of thermodynamics states that energy cannot be created or destroyed but can only be transformed from one form to another.
II. It is possible for heat to flow spontaneously from a hot body to a cold one or from a cold one
to a hot one, depending on whether or not the process is reversible or irreversible. According to the second law of thermodynamics this is false due to the entropy.
III. It is not possible to convert work entirely into heat. It is possible to completely convert work into heat because it involves transferring energy.
IV. It is impossible to transfer heat from a cooler to a hotter body.
What body part is the metric system based upon?
legs
arms
feet
fingers
The metric system is an internationally used system of checking various quantiles if weight tat includes the length, temperature, mass, etc., and is used in everyday life.
As nearly all the units are based on the human body they include the thumb joint was taken as yardsticks and was once used to define distance.Hence the option D is correct.
Learn more about the part is the metric system based upon.
brainly.com/question/25722826.