A 10-A current is maintained in a simple circuit with atotal resistance of 209 ohm. What net charge passes through any point in a circuit during a 1-minute interval?

The difference between the majority viewpoint and the minority view is that the majority group is made to feel normal and the minority group is made to feel divergent.

A vantage point or point of view from which something is viewed or assessed is known as the viewpoint The story is narrated from a variety of perspectives, including two major ones and several smaller ones.

Most studies comparing majority versus minority influence argue the author, places a premium on influence in the sense of prevailing. In this context.

There is evidence that majorities have greater public influence than minorities, and that minority impact when it happens, is mostly latent. In the current version,

Hence the difference between the majority viewpoint and the minority view is that the majority group is made to feel normal and the minority group is made to feel divergent.

To learn more about the viewpoint refer to the link;

https://brainly.com/question/1043206

    Answer:  D        

Explanation:

Simplified for you.

The sampling rate that's given regarding the CPU will produce a rate of 256kps.

The following can be gotten from the question:

Sampling rate = 8KHx

Number of bits = 32

The data rate will be:

= 32 × 8kbps

= 256kps

In conclusion, the sampling rate that's given regarding the CPU will produce a rate of 256kps.

Learn more about rates on:

https://brainly.com/question/2375289

The sampling rate specified for the CPU will result in a 256kb/s rate.Sampling rate is also known as the sampling frequency.

The number of samples per second collected from a continuous signal to create a discrete or digital signal is referred to as sampling rate or sampling frequency.

The given data in the problem is;

Sampling rate= 100 mhz cpu

Number of  bits=32

The rate of the data is;

[tex]\rm R = 32 \times 8 kb/ s \\\\ \rm R = 256 kb / s \\\\[/tex]

Hence the sampling rate specified for the CPU will result in a 256kb/s rate.

To learn more about the sampling rate refer to the link;

https://brainly.com/question/18917438

#SPJ4

Distance is the factor that decreased the sound intensity.

As a sound wave carries its energy through a  medium, the intensity of the sound wave decreases with increasing distance from the source.

So we can conclude that distance is the factor that decreased the sound intensity.

Learn more about sound here: https://brainly.com/question/9349349

#SPJ1

By a factor of 1/9, the sound intensity decreased at 3 meters. Option A is correct,

Sound intensity is inverse proportional to the square of the distance.

The intensity of the sound is;

[tex]\rm I = \frac{1}{d^2} \\\\ \rm I = \frac{1}{3^2} \\\\ I=\frac{1}{9}[/tex]

By a factor of 1/9, the sound intensity decreased at 3 meters.

Hence, option A is correct,

To learn more about the sound intensity refer;

https://brainly.com/question/15089336

#SPJ1

Explanation:

Multiply the time by the acceleration due to gravity to find the velocity when the object hits the ground. If it takes 9.9 seconds for the object to hit the ground, its velocity is (1.01 s)*(9.8 m/s^2), or 9.9 m/s

Answer:

800 feet per sec.

Explanation:

Converting it over from 105.1mph to ft per sec is only about 154.15fps.

Answer:

yes

true

Explanation:

because earth is rotation

Thermal energy is involved when water changes from one phase to the next. Option A is correct.

Latent heat is the heat needed for the phase change . When the temperature remains constant during melting or boiling, the added energy is employed in the phase change process.

The total number of water particles remains constant when water changes states throughout the water cycle.

When water alterations from one phase to the next, thermal energy is involved. Latent heat is the storage of thermal energy.

Hence, option A is correct.

To learn  more about the latent heat, refer;

https://brainly.com/question/87248

#SPJ2

Answer:

The two factors that affect the type of Shadows formed are stated below ::

Answer:

The distance of the source of light from the object.

The angle at which the light rays fall on the object.

The size of the opaque object.

The size of the shadow depends on the distance of the source of light and on the angle at which the light rays fall on the object.

If the source of light is closer to the object, a larger shadow is formed than when the source of light is far from the object.

Explanation:

picture is in the top ️️️⬆️⬆️⬆️⬆️⬆️

It can be observed from the above figure that as the angle of light incident on the object changed the length of the shadow changed.

Hope you like this

Answer:

1. Why does a magnet exert force on another magnet when the two magnets are not in contact? The magnetic field from north to south increases when they're closer together, and when they repel the repelling force increases as well. This is all due to the magnetic field.

Correct me if I'm wrong, Hope this helps

Favor(Brainliest)

#Carryonlearning

Answer:

The energy of a mechanical wave can travel only through matter. The matter through which the wave travels is called the medium (plural, media). The medium in the water wave pictured above is water, a liquid. But the medium of a mechanical wave can be any state of matter, even a solid.

Explanation:

Brainlest pls if can thank you ! i hope its helped

Answer:

2 kg

Explanation:

K.E. = 1/2 m v^2

81   = 1/2  m (9^2)

1 = 1/2 m

m = 2 kg

Now

[tex]\\ \rm\rightarrowtail \nu=\dfrac{1}{T}[/tex]

[tex]\\ \rm\rightarrowtail \nu=\dfrac{1}{8\times 10^{-5}}[/tex]

[tex]\\ \rm\rightarrowtail \nu=0.125(10^5)[/tex]

[tex]\\ \rm\rightarrowtail \nu=12500s^{-1}[/tex]

[tex]\\ \rm\rightarrowtail \nu=12500Hz[/tex]

The specific heat capacity of the calorimeter used in mixing the water is determined as 21.87 J/g⁰C.

The heat capacity of the calirometer is determined by applying the principle of conservation of energy.

Heat lost by the hot water = Heat gained by the calirometer

[tex]Q _w = Q_c\\\\M_w C_w\Delta \theta _w = M_c C_c\Delta \theta _c[/tex]

where;

mass = density x volume = ρV

Density of water = 1 g/ml

Mass of hot water = 1 x (50) = 50 g

Mass of water in calorimeter = 1 x (60) = 60 g

[tex]\Delta T_c = 5.5\\\\T - 25 = 5.5\\\\T = 30.5 \ ^0C[/tex]

[tex]50 \times 4.184 \times (65 - 30.5) = 60 \times C_c \times (30.5 - 25)\\\\7217.4 = 330C_c\\\\C_c = \frac{7217.4}{330} \\\\C_c = 21.87 \ J/g^0C[/tex]

Thus, the specific heat capacity of the calorimeter used in mixing the water is determined as 21.87 J/g⁰C.

The complete question is below

When using a different calorimeter, and mixing 50 ml of hot water at

65 degrees C with 60 ml of water in the calorimeter at 25 degrees C, the temperature of the calorimeter increased by 5.5 degrees C.

a. Calculate the heat capacity of this calorimeter?

Learn more about heat capacity here: https://brainly.com/question/16559442

Explanation:

Given : m=600kg h=20 m

Time of operation t=2 min =120 s

Work done in lifting a box W=mgh=600×10×20=120000

Power required P=

t

W

=

120

120000

=1000 watts

The statement the power of an electric heater is 1200 W means that the electric heater used up 1200 J of electric energy in one second.

When the velocity of a moving body is doubled, its kinetic energy will become four times its initial kinetic energy.

Power is the rate at which energy is used up. The s.i unit of power is Watt (W).

From the question, if an electric heater is 1200 W, it means that the electric heater used up 1200 J of electric energy in one second

Kinetic energy is the energy of a body in motion.

The formula for the kinetic energy of a body is given as

From the equation above, it can be seen that if the velocity of a moving body is doubled, the kinetic energy of the body will become four times the initial kinetic energy of the body.

Hence, The statement the power of an electric heater is 1200 W means that the electric heater used up 1200 J of electric energy in one second.

When the velocity of a moving body is doubled, its kinetic energy will become four times its initial kinetic energy.

Learn more about electric power here: https://brainly.com/question/24858512

Answer: Mass Number

Explanation:

Atomic number is the number of just protons;

Nuclear Model is a theoretical description of what an atom looks like;

Energy levels are the energy states that electrons are in;

However, mass number is by definition the number of protons + number of neutrons. :)

Answer: 1.51 km

Explanation:

Coulomb's Law: The electrostatic force between two charge particles Q: and Q2 is directly proportional to product of magnitude of charges and inversely proportional to square of separation distance between them.

Or,   [tex]\vec{F}=k \frac{Q_{1} Q_{2}}{r^{2}}[/tex]

Where Q1 and Q2 are magnitude of two charges and r is distance between them:

Given:

Q1 = Charge near top of cloud = 48.8 C

Q2 = Charge near the bottom of cloud = -41.7 C

Force between charge at top and bottom of cloud (i.e. between Q: and Q2) (F) = 7.98 x 10^6N

k = 8.99 x 109Nm^2/C^2

So,

[tex]\begin{aligned}&7.98 \times 10^{6}=\left(8.99 \times 10^{9} \mathrm{Nm}^{2} / \mathrm{C}^{2}\right) \frac{48.8 \mathrm{C} \times 41.7 \mathrm{C}}{\mathrm{r}^{2}} \\&r=\sqrt{\frac{1.8294 \times 10^{13}}{7.98 \times 10^{6}}}=1.514 \times 10^{3} \mathrm{~m}=1.51 \mathrm{~km}\end{aligned}[/tex]

Therefore, the separation between the two charges (r) = 1.51 km

Answer:

your mom g

Explanation:

DRACO SEASON WITH THE BOOK BAG

Explanation:

If the size and direction of the forces on the object are exactly balanced , then there is no net force acting on the object

Glass is known to be a good insulator because atoms in glass hold on tightly to their positively charged particles.

Insulators are those substances that do not conduct heat or electricity like their conductor counterparts.

Conduction of electric charges is as a result of the free flow of electrons in the atom of the substance.

Hence, a good insulator holds on tightly to its electrons and prevent them from flowing freely to conduct electric charges.

Therefore, Glass is known to be a good insulator because atoms in glass hold on tightly to their positively charged particles.

Learn more about insulators at: https://brainly.com/question/24909989

It's the first answer, The atoms in glass hold on tightly to their positively charged particles.

- CONNECTIONS
---

much love <3

Answer:

They're are Conditions .... (L00K D0WN.)

Explanation:

Conditions for equilibrium require that the sum of all external forces acting on the body is zero (first condition of equilibrium), and the sum of all external torques from external forces is zero (second condition of equilibrium). These two conditions must be simultaneously satisfied in equilibrium.

Hi there!

Recall that:
[tex]\Delta V = -\int\limits^a_b {E \cdot } \, dx[/tex]

Given an electric field, the potential difference can be solved by using integration. Similarly:
[tex]E = -\frac{dV}{dx}[/tex]

We can differentiate the electric potential equation to solve for the electric field.

Use the power rule:
[tex]\frac{dy}{dx} x^n = nx^{n - 1}[/tex]

Differentiate the given equation.

[tex]-\frac{dV}{dx}\frac{7}{x^2} =- \frac{dV}{dx}7x^{-2} = -(-14x^{-3}) = \frac{14}{x^3}[/tex]

Or:
[tex]\boxed{E(x) = \frac{14}{x^3}}[/tex]

The component of the electric field in that region is E = 14/x³ if the electric potential in a region is given by v(x)=7/x2

An electric field is an electric property that is connected with any location in space where a charge exists in any form. The electric force per unit charge is another term for an electric field.

We have:

The electric potential in a region is given by:

[tex]\rm V(x) = \frac{7}{x^2}[/tex]

We know the relation between potential difference and an electric field is given by:

[tex]\rm \triangle V = \int\limits^a_b {E.} \, dx[/tex]

If the electric field is given, then:

[tex]\rm E = -\frac{dV}{dx}[/tex]

[tex]\rm E = -\frac{d(7x^{-2} )}{dx}[/tex]

After differentiate:

[tex]\rm E = -(-14x^{-3})[/tex]  or

[tex]\rm E = \frac{14}{x^3}[/tex]

Thus, the component of the electric field in that region is E = 14/x³ if the electric potential in a region is given by v(x)=7/x2

Learn more about the electric field here:

https://brainly.com/question/26690770

#SPJ4

The force at which the arrow moved when an archer shot a 0.04 kg arrow at a target is 280 N.

Force is the product of mass and acceleration.

To calculate the amount of force the arrow moves, we use the formula below.

Formula:

Where:

From the question,

Given:

Substitute these values into equation 2

Hence, the force at which the arrow moved is 280 N.

Learn more about force here: https://brainly.com/question/18762601

The reactions of the citric acid cycle that provide reducing power for the electron‑transport chain are as follows:

Citric acid cycle also known as kreb cycle is a series of biochemical reactions that involves the synthesis of reduced electron carrier and ATP.

The following steps in the citric acid cycle involves the provision of reducing power for the electron‑transport chain:

Learn more about citric acid cycle: https://brainly.com/question/11459709

The reactions of the citric acid cycle which provide reducing power for the electron‑transport chain are:

Citric acid cycle, is the tricarboxylic acid cycle (TCA), which is the combination of chemical reaction. This reaction is necessary to produce the energy in aerobic organisms.

The reactions of the citric acid cycle which provide reducing power for the electron‑transport chain are:

Hence, the option 1,3 and 4 is correct.

Learn more about the citric acid cycle here;

https://brainly.com/question/11238674

#SPJ4

Answer:

1.36 meters

Explanation:

we just plug in the values into the formula given in the question

3.4/2.5 = answer

answer is 1.36

Answer:

Aeroplane

Explanation:

they have tail surfaces to stabilize the wings

She need to release the cluch slowly and apply force on the accelator other than place her vehicle's gear in Drive and accelerate

We drive a car by applying pressure on the accelator, remove foot from the brakes and releasing cluch slowly. When the vehicle get speed, we have to change the gear.

So we can conclude that She need to release the cluch slowly and apply force on the accelator for driving a car.

Learn more about accelaration here: https://brainly.com/question/605631

[tex]\text{Density,}\\\\~~~~~~~~\rho = \dfrac mV\\\\\\\implies V = \dfrac m{\rho}\\\\\\\implies V = \dfrac{7 \times 10^{-3}~ \text{kg}}{\tfrac{5.6 \times 10^{-3}~ \text{kg}}{ 10^{-6} ~\text{m}^3} }\\\\ \\\implies V = \dfrac{7 \times 10^{-3}~ \text{kg}}{5.6 \times 10^{-3} \times 10^6~~ \text{kg}~ \text{m}^{-3}}\\\\\\ \implies V = 1.25 \times 10^{-6}~ \text m^3\\\\\\\implies V =0.00000125~ \text m^3\\\\\text{Hence the volume of the coin is 0.00000125}~ \text m^3[/tex]

The time taken by the runner to do the work is 1.42 seconds.

Given the data in the question;

Power can be simply referred to as the quantity of energy transferred per unit time.

It is expressed as;

[tex]P = \frac{W}{t}[/tex]

Where W is work done and t is time elapsed.

To determine the time it took the runner to do the work, we substitute our given values into the expression above.

[tex]P = \frac{W}{t} \\\\t = \frac{W}{P} \\\\t = \frac{457J}{321W} \\\\t = \frac{457 kgm^2/s^2}{321 kgm^2/s^3}\\\\t = 1.42s[/tex]

Therefore, the time taken by the runner to do the work is 1.42 seconds.

Learn more about Power and Work: https://brainly.com/question/2962104

Answer:

its called a fault

Explanation:

Its when u mess up