Answer:
v₂ = 2,665 m / s
Explanation:
This is an exercise of conservation of the momentum, we define a system formed by the two cars, so that the forces during the collision are internal and the moment is conserved.
Initial instant. Before the crash
p₀ = m v_o
Final moment. Right after the crash
p_f = m v₁ + M v₂
where the first car uses subscript 1 and has a mass m = 1 kg and the second car uses the subscript 2 with a mass M = 2kg
how the moment is preserved
p₀ = p_f
m v_o = m v₁ + M v₂
They indicate that the collision is elastic, therefore the kinetic energy is conserved, the velocity of the first car is v1 = -1.33 me / S
v₂ = [tex]\frac{ m ( v_o - v_1)}{M}[/tex]
we calculate
v₂ = [tex]\frac{ 1 ( 4 + 1.33)}{2}[/tex]
v₂ = 2,665 m / s
what is the rate of acceleration of a 2,000-kilogram truck if a force of 4,300 N is used to make it start moving forward
A free body diagram represents all of the following except:
a)the object
b)forces as vectors
c)forces exerted by the object
d)forces exerted on the object
Answer:
c
Explanation:
A free body diagram doesn't show forces exerted by the object.
A free body diagram represents all the given choices except the one which is "forces exerted by the object"
Diagrams that represent the approximate magnitude as well as the direction of all pressures exerted on either an item throughout a particular condition.Drawing such a free-body schematic or the model seems to be a key step towards pattern recognition throughout mechanical because it allows you to see every one of the influences operating on a particular element.
Thus the above answer is right.
Learn more:
https://brainly.com/question/13191643
1 2 3 4 5 6 7 8 9 10
TIME REMAINING
09:57:20
A scientist discovers a deep bowl-like divot under the ocean off the coast of eastern Mexico that is many kilometers across. The layers of the ground all around the continent from around the time that structure formed contain large amounts of iridium and a larger number of fossils than is normally found. What most likely caused the bowl-like structure?
a meteorite impact
an asteroid impact
an iridium spike
a Kuiper object impact
Mark this and return
Answer:
answer is an ASTEROID
Explanation:
Iridium is a material that forms at very high temperatures, which is why its presence shows that in the impact zone the temperature rose a lot, so we can imagine that the impact was by a body traveling at high speed, which is consistent with a body that comes from space.
An asteroid is a celestial body of some size that when entering the atmosphere heats up and collides with the Earth, leaving a crater that in general is much larger than the diameter of the object.
A meteorite is a small fraction of an asteroid that has been separated by the pressure of the sun, the attraction of the Earth, Moon or another massive body or a combination of these effects, in general, meteorites are small and when they enter the atmosphere They are consumed by heat and very few reach the surface of the Earth, those that do reach are very small.
Therefore due to the size of the crater and the existence of many dead animals around the body must have been very heavy, so the correct answer is an ASTEROID
Answer:
B) An asteroid impact
Explanation:
Why would a person who weights 100 lbs. on earth weight significantly More on Jupiter?
A. Jupiter has more gravitational force then earth
B.Jupiter is farther away from sun
C.Jupiter has no atmosphere
Im pretty sure the answer is A)
An impulse of 12.2kg m/s is delivered to an object whose initial momentum is 4.5kgm/s. What is the object's final momentum?
Answer:
Object's final momentum = 16.7 kg-m/s
Explanation:
Given that,
Impulse, J = 12.2 kg-m/s
Initial momentum, [tex]P_i=4.5\ kg-m/s[/tex]
We need to find the object's final momentum. We know that the impulse is equal to the change in momentum. So,
Impulse = change in momentum
[tex]J=P_f-P_i\\\\P_f=J+P_i\\\\P_f=12.2+4.5\\\\P_f=16.7\ kg-m/s[/tex]
So, the object's final momentum is 16.7 kg-m/s.
Given:
Impulse, [tex]J = 12.2 kg-m/s[/tex]Initial momentum, [tex]P_i = 4.5 \ kg-m/s[/tex]We know the relation,
→ [tex]Impulse = Change \ in \ momentum[/tex]
or,
→ [tex]J = P_f-P_i[/tex]
then,
→ [tex]P_f = J+P_i[/tex]
By substituting the values,
[tex]= 12.2+4.5[/tex]
[tex]= 16.7 \ kg-m/s[/tex]
Thus the above answer is right.
Learn more about momentum here:
https://brainly.com/question/18551770
please help me out here
Answer:
Explanation:
it's blocked for me...it was unblocked but you know how everything else is blocked
A meter rule balance on a knife headge at the 55cm mark wheb a mass of 40g from 995cm .find the mass of the meter rule.
Answer:
Let the weight of the ruler be X.
Now X acts in the middle, so we have 55-50 = 50cm
Since left hand movement= right hand movement
X(55-50)=90(95-55)
5X= 90×40
X=320cm
Hence the weight of the ruler is 320g
Explanation:
If a car travels 200 meters in 10 seconds how fast is it going
Answer:
20 meters per second.
Explanation:
200/10
True or False: Speed is a vector quantity.
Answer:
it's false coz
Speed is a scalar quantity.
What is the difference between a scalar and a vector?
Answer:
Vector has magnitude and direction, scalar only has magnitude.
Answer:
A quantity that has magnitude but no particular direction is described as scalar. A quantity that has magnitude and acts in a particular direction is described as vector
What is the impulse of a constant force of 50 newtons applied for 0.6 seconds
Answer:
30 kg·[tex]\frac{m}{s}[/tex]
Explanation:
Impulse is equal to the average force multiplied by the elapsed time, or
J=[tex]F_{av}[/tex]Δt
Your average force [tex]F_{av}[/tex] is 50 newtons because it was a constant force. Your elapsed time Δt was 0.6 seconds.
Multiply these values and you get an impulse of 30 kg·[tex]\frac{m}{s}[/tex]
3. What is the force acting on an object with a mass of 50kg and an acceleration of
10m/s2?
I
Answer:
500 Newtons
Explanation:
50 kg x 10 m/s squared
The cadmium in the control rods slows down a nuclear fission reaction by absorbing neutrons.
Please select the best answer from the choices provided
T
F
answer:
true
explanation:
cadmium is used during controlled reaction to produce energycredits: https://brainly.in/question/6969690Answer:
True!
Explanation:
cadmium is being used during controlled reaction which creates the energy!
I took this test! :3
A satellite with mass of 3,000 kg is moving at 8,000 m/s. What is its momentum
in kg m/s?
Answer:
25,000,000 kg m/s
Explanation:
p: momentum (kg x m/s)
m: mass (kg)
V: velocity (m/s)
p= m * v
p= 3,000kg x 8,000 m/s
p= 25,000,000 kg m/s
How many degrees are there between the direction of motion and the force of friction?
A. O
B. 270
C. 90
D. 180
The correct option is (d).
Angle should be 180° between the direction of force and the direction of motion of a body as work done is equal to force multiplied by displacement multiplied by cosx.
Friction is a force that opposes motion. When two objects are in contact, friction is acts in a direction opposite to the motion of the object.A force known as friction prevents relative motion between surfaces that are in touch. One of the more basic features of friction is that it always runs parallel to the surfaces with which it makes contact and opposes any motion or attempted motion of the systems with respect to one another.What is the direction of friction force?When a force is applied to stop it from moving, frictional force provides resistance. As a result, it always moves in the opposite direction of an item in motion. Friction acts on the right when force is applied to the left.Learn more about direction of friction force brainly.com/question/24322020
#SPJ2
If you increase the volume of a sound wave, what else will change?
A) Pitch
B) Elasticity
C) Frequency
D) Amplitude
Answer:
A
Explanation:
Which characteristic is used to measure the amount of light radiated by a star?
A.size
B.color
C.luminosity
D.temperature
A constant friction force of 21 N acts on a 63-kg skier for 25 s on level snow. What is the skier’s change in velocity?
A 14-gauge copper wire of diameter 1.628 mm carries a current of 12.5 What is the potential difference across a 2.00 - m length of the wire? *p=1.47x10^-8
Answer:
[tex]V=1.76\times 10^{-4}\ V[/tex]
Explanation:
Given that,
The diameter of a wire, d = 1.628 mm
Radius, r = 0.814 mm = 0.000814m
Current, I = 12.5 mA
The length of the wire, l = 2m
The resistivity of the wire, [tex]\rho=1.47\times 10^{-8}\ \Omega-m[/tex]
We need to find the potential difference across the wire. We know that the resistance of the wire is given by :
[tex]R=\rho\dfrac{l}{A}[/tex]
Also, V = IR
[tex]\dfrac{V}{I}=\rho\dfrac{l}{A}\\\\V=\dfrac{\rho l I}{A}\\\\V=\dfrac{1.47\times 10^{-8}\times 2\times 12.5\times 10^{-3}}{\pi \times (0.000814)^2}\\\\V=1.76\times 10^{-4}\ V[/tex]
So, the potential difference of the wire is [tex]1.76\times 10^{-4}\ V[/tex].
circle the best answer on the line provided.
i. If an object starts to accelerate,
a. a balanced force is acting on it
b. gravity is acting on it
c. velocity is acting on it
d. an unbalanced force is acting on it
Plsss asap ill mark branliest
Why is Speed and Kinetic Energy related ?
Answer:
Speed affects the amount of kinetic energy an object has
Explanation:
Kinetic energy is the energy of motion therefore, it can be affected by speed
To those against whom war is made, permission is given (to fight), because they are wronged;- and verily, Allah is most powerful for their aid.
Answer:
allah is pog
Explanation:
Was Michael Jean Cazabon a local or regional artist?
Answer:
artist
Explanation:
please help me answer this
Answer:
A is the correct answer
Hope it helps
The acceleration of the object may be zero and the velocity of the object may not be equal to zero
Sure. That's true when ANY object is moving in a straight line at a steady speed.
13 A lawn-mower is pushed with a force of 50 N.
If the angle between the handle of the mower
and the ground is 30°,
(i) Calculate the magnitude of the force that
is pressing the lawn-mower directly into
the ground.
(ii) Calculate the magnitude of the effective
force that moves the mower forward.
(iii) Why does the lawn-mower move forward
and not downward into the ground?
Answer:
13. (i) The magnitude of the force that is pressing the lawn-mower directly into the ground is 25 N
(ii) The magnitude of the effective force that moves the mower forward is approximately 43.3 N
(iii) Because there are no net downward force acting on the lawn-mower
Explanation:
13. The given force pushing the lawn-mower = 50 N
The angle at which the force acts = 30° to the ground
The component of the pushing force are;
(i) The magnitude of the force that is pressing the lawn-mower directly into the ground = The vertical component of the pushing force
The vertical component of the pushing force, [tex]F_y[/tex] = 50 N × sin(30°) = 25 N
∴ The magnitude of the force that is pressing the lawn-mower directly into the ground = [tex]F_y[/tex] = 25 N
(ii) The magnitude of the effective force that moves the mower forward = The horizontal component of the pushing force
The horizontal component of the pushing force, Fₓ = 50 N × cos(30°) = 25·√3 N ≈ 43.3 N
∴ The magnitude of the effective force that moves the mower forward = 25·√3 N ≈ 43.3 N
(iii) The lawn mower moves forward and not downwards because according to Newton's first Law of motion, the lawn-mower moves forward because it is being acted on by a net forward directed horizontal force
However, according to Newton's third law, the reaction of the ground is equal to the weight of the lawn mower, therefore, there are no net vertical force acting on the lawn-mower, such that the lawn-mower remains in the initial horizontal level and does not move downward into the ground.
1)A 2.0 kilogram wooden object is a on a wooden surface. What is the maximum force of friction that can be produced in this system?
Answer:
fr = 7.84 N
Explanation:
To solve this exercise we must use Newton's second law, the case of translational equilibrium
F -fr = 0
F = fr
where F is the applied force and fr the friction force
for the Y axis
N -W =
N = W
N = m g
the friction force has the equation
fr = μ N
fr = μ m g
in this case they indicate the two materials that are in contact with wood on wood, so when reviewing the tables the coefficient of static friction is μ=0.4
let's calculate
fr = 0.4 2.0 9.8
fr = 7.84 N
I need help with this problem on science 8th grade here is the picture of the assignment place help me
Answer:
the first one is D
Explanation:
so if the others u put are right the the second would be c
PLS ANSWER FAST WILL GIVE BRAINLY!!!!! BUT ONLY IF YOU KNOW
what happens outside of the nucleus?
Answer:
electrons
Explanation:
i think this is right
A gas at 8.4 atm has a volume of 1.9 L. What volume would the gas have at 8.3 atm?
Answer:
the final volume of the gas is 1.923 L.
Explanation:
Given;
initial pressure, P₁ = 8.4 atm
initial volume of the gas, V₁ = 1.9 L
final pressure of the gas, P₂ = 8.3 atm
The final volume of the gas is calculated by applying Boyle's law as follows;
P₁V₁ = P₂V₂
V₂ = P₁V₁ / P₂
V₂ = (8.4 x 1.9) / 8.3
V₂ = 1.923 L
Therefore, the final volume of the gas is 1.923 L.