-91x-13x= 276.50
Show work

The given table shows the cost of snacks at a baseball game. The cost of each snack item is given as:| Snack Item | Cost of one snack item | Nachos | $2.50 |

We know that Mr. Cooper buys six nachos for her daughter and five friends. Therefore, the total cost of the six nachos would be 6 × $2.50 = $15.The distributive property states that, if a, b and c are three numbers, then: `a(b + c) = ab + ac`Here, a = $2.50, b = 5 and c = 1.

Hence, using distributive property, we can find the cost of six nachos for Mr. Cooper's daughter and her five friends.2.50 × (5 + 1) = 2.50 × 5 + 2.50 × 1 = $12.50 + $2.50 = $15Hence, the cost of six nachos for Mr. Cooper's daughter and her five friends would be $15.Therefore, the amount of change that Mr. Cooper would receive from $30 is: $30 - $15 = $15. Mr. Cooper would receive a change of $15.

Know more about distributive property states here:

https://brainly.com/question/12021668

#SPJ11

The limit is 3, which is greater than 1, so the series is divergent.

Using the ratio test, the series is convergent if the limit of the ratio of consecutive terms (|aₙ₊₁/aₙ|) is less than 1, divergent if it's greater than 1, and inconclusive if it's equal to 1. In this case, aₙ = (−3)ⁿ/n².


1. Identify aₙ₊₁: aₙ₊₁ = (−3)ⁿ⁺¹/(n+1)²
2. Calculate the ratio |aₙ₊₁/aₙ|: |[(−3)^(n+1)/(n+1)²] / [(−3)ⁿ/n²]|
3. Simplify the ratio: |(−3)^(n+1)/(n+1)² * n²/(−3)ⁿ| = |(−3)ⁿ⁺¹⁻ⁿ * n²/(n+1)²| = |(−3) * n²/(n+1)²|
4. Take the limit as n approaches infinity: lim (n→∞) (3n²/(n+1)²)

To know more about ratio test click on below link:

https://brainly.com/question/15586862#

#SPJ11

Answer:

  19,683

Step-by-step explanation:

You want the 10th term of a geometric sequence with first term 1 and a common ratio of 3.

The n-th term of a geometric sequence with first term a1 and common ratio r is ...

  an = a1·r^(n-1)

For a1=1 and r=3, the 10th term is ...

  a10 = 1·3^(10-1) = 3^9 = 19,683

Karl would put 19,683 pennies in the jar on the 10th day.

__

Additional comment

On the 24th day, Karl would be putting into the jar the last of the 288 billion pennies in circulation.

The volume of added pennies on the 10th day is more than 7 liters, bringing the total that day to more than 10 liters. That's a pretty big jar.

The value of the triple integral is π/2 - 2.

In spherical coordinates, the radial distance is denoted by ρ, the angle of elevation (measured from the positive z-axis) is denoted by θ, and the angle of rotation (measured from the positive x-axis) is denoted by φ.

To set up the integral, we begin by writing the expression for the volume element in spherical coordinates:

dV = ρ² sin(θ) dρ dθ dφ

Next, we write the function in terms of spherical coordinates. In this case, the function is 1/(x²+y²+z²), which can be written as 1/ρ² in spherical coordinates.

Finally, we set up the integral as follows:

∫∫∫E1/(x²+y²+z²) dV = [tex]\int _0 ^ {\pi /2} \int_0^{\pi/2-\theta sin(\theta)}[/tex] ρ² sin(θ) (1/ρ²) dρ dθ dφ

Note that we integrate from 0 to π/2 for θ and φ because we are only considering the first octant. Also note that we integrate over ρ from the smaller sphere (ρ=3) to the larger sphere (ρ=4).

Now, we can simplify the integral by canceling out the ρ² term in the integrand and evaluating the resulting integral:

∫∫∫E1/(x²+y²+z²) dV = [tex]\int _0 ^ {\pi /2} \int_0^{\pi/2-\theta sin(\theta)}[/tex] sin(θ) dρ dθ dφ

= [tex]\int _0 ^ {\pi /2} \int_0^{\pi/2-\theta sin(\theta)}[/tex] (π/2-θ) dθ dφ

= [tex]\int _0 ^ {\pi /2}[/tex] (1-cos(π/2-θ)) dθ

= [tex]\int _0 ^ {\pi /2}[/tex] (1-sin(θ)) dθ

= π/2 - 2

To know more about coordinates here

https://brainly.com/question/27749090

#SPJ4

Given the function F0(x) = 1 - 1/(1+x) for x ≥ 0, we can find expressions for the requested terms:

(a) S0(x) is the survival function, which is the complement of the cumulative distribution function F0(x). Therefore, S0(x) = 1 - F0(x). Substituting F0(x) into the equation, we get:
S0(x) = 1 - (1 - 1/(1+x)) = 1/(1+x)
(b) f0(x) is the probability density function (pdf) and can be found by taking the derivative of the cumulative distribution function F0(x) with respect to x:
f0(x) = dF0(x)/dx = d(1 - 1/(1+x))/dx = 1/(1+x)^2
(c) To find Sx(t), we need to find the survival function for an individual aged x at time t. Since we know S0(x), we can find Sx(t) using the following relationship:
Sx(t) = S0(x+t)/S0(x)
By substituting S0(x) into the equation, we get:
Sx(t) = (1/(1+x+t))/(1/(1+x)) = (1+x)/(1+x+t)
Now we can calculate the requested values:
(d) p20 is the probability of surviving one more year for an individual aged 20. It is given by:
p20 = S20(1)/S20(0)
Substitute 20 for x and 1 for t in Sx(t):
p20 = (1+20)/(1+20+1) = 21/22
(e) The term 10|5q30 does not follow the standard notation used in survival analysis. Please provide more context or clarify the term to receive an appropriate answer.

Learn more about cumulative distribution function here:

https://brainly.com/question/30402457

#SPJ11

The orthogonal complement w⊥ of w has a basis given by {v1, v2} = {(1, 0, 0), (0, 1, 2)}.

To find the orthogonal complement w⊥ of w, we need to find the set of all vectors that are orthogonal (perpendicular) to w.

Given w = (x, y, z) = (12t, -12t, 6t), we can find a vector v = (a, b, c) that is orthogonal to w by taking their dot product equal to zero:

w · v = 0

Substituting the values of w and v:

(12t, -12t, 6t) · (a, b, c) = 0

(12t)(a) + (-12t)(b) + (6t)(c) = 0

12at - 12bt + 6ct = 0

Now, we can solve this equation to find the values of a, b, and c that satisfy the orthogonal condition for all values of t.

12at - 12bt + 6ct = 0

Factor out t:

t(12a - 12b + 6c) = 0

For this equation to hold true for all values of t, the expression inside the parentheses must equal zero:

12a - 12b + 6c = 0

Divide by 6:

2a - 2b + c = 0

This equation represents a plane in three-dimensional space. To find a basis for w⊥, we can express this equation in the form of a linear combination of vectors. Let's solve for c:

c = 2b - 2a

Now, we can express the basis vectors for w⊥ in terms of a and b:

v = (a, b, 2b - 2a)

We can choose any values for a and b to get different vectors in the orthogonal complement w⊥. For example, we can set a = 1 and b = 0:

v1 = (1, 0, 0)

Or we can set a = 0 and b = 1:

v2 = (0, 1, 2)

These two vectors, v1 and v2, form a basis for w⊥.

Therefore, the orthogonal complement w⊥ of w has a basis given by {v1, v2} = {(1, 0, 0), (0, 1, 2)}.

Learn more about Orthogonal.

brainly.com/question/32196772

#SPJ11

The equations in slope-intercept forms are: y = (2/7)x + 6 and y = (-7/4)x - 1/2. They are not perpendicular.

To rewrite the given equations in slope-intercept form (y = mx + b), where m represents the slope and b represents the y-intercept:

2x - 7y = -42

Rearranging the equation:

-7y = -2x - 42

y = (2/7)x + 6

Equation 1 in slope-intercept form: y = (2/7)x + 6

4y = -7x - 2

y = (-7/4)x - 1/2

Equation 2 in slope-intercept form: y = (-7/4)x - 1/2

To determine whether the lines are perpendicular, we need to compare their slopes. Perpendicular lines have slopes that are negative reciprocals of each other.

The slope of Equation 1 is 2/7, and the slope of Equation 2 is -7/4.

Calculating the negative reciprocal of the slope of Equation 1:

Negative reciprocal of 2/7 = -7/2

The slopes are not negative reciprocals of each other (-7/4 ≠ -7/2), so the lines are not perpendicular.

Learn more about Equation in Slope-intercept Form on:

https://brainly.com/question/1884491

#SPJ1

The equivalent expression of 0.40a is 0.40(a - 1)

Stella uses the expression 0.40a, where a is the original attendance at a play, to find the reduced attendance at the next performance. A formula for calculating the reduced attendance at the next performance can be represented by this expression 0.40a.
To find the equivalent expression to 0.40a, we have to distribute 0.40 and simplify as shown below:0.40a= (0.40 * a) = 0.40a
Also, 0.40(a - 1) can also be used to calculate the reduced attendance at the next performance.

The equivalent expression to 0.40a is 0.40(a - 1).

To know more about expression, click here

https://brainly.com/question/28170201

#SPJ11

a. To evaluate dx using integration by parts, we start with the formula ∫udv = uv - ∫vdu. Selecting u=x and dv=1, we have:

∫xdx = x∙(integral of 1 dx) - ∫(integral of 1 dx)∙dx
∫xdx = x∙x - ∫dx
∫xdx = x^2 - x + C (where C is the constant of integration)

b. To evaluate dx using substitution, we let u=x and dx=du. Then, we have:

∫xdx = ∫u du
∫xdx = (u^2)/2 + C
∫xdx = (x^2)/2 + C

c. To verify that the answers to parts (a) and (b) are consistent, we can differentiate both answers and check if they are equal:

d/dx[(x^2 - x + C)] = 2x - 1
d/dx[(x^2)/2 + C] = x

Since 2x-1 is not equal to x, the answers from parts (a) and (b) are not consistent. This may be due to an error in part (a) or part (b), or it may be because the two methods do not always give the same answer. Therefore, we should recheck our work to make sure we have not made any mistakes.

In summary, we can use integration by parts or substitution to evaluate integrals of x with respect to x. However, we must make sure that our answers are consistent by checking them through differentiation. If the answers are not consistent, we should recheck our work to ensure that we have not made any mistakes.

To know more about integration visit:

https://brainly.com/question/18125359

#SPJ11

The sensitivity R'(x) to the drug is given by [tex]R'(x) = 400x - x^2/3[/tex]

To find the sensitivity R'(x) to the drug, we need to differentiate the function R(x) with respect to x. The function R(x) is given by:

[tex]R(x) = x^2(200 - x/3)[/tex]

Now let's find the derivative R'(x):

Step 1: Apply the product rule, which states that (uv)' = u'v + uv'. Let[tex]u = x^2[/tex] and v = (200 - x/3).

Step 2: Find the derivative of u with respect to x: u' = d[tex](x^2[/tex])/dx = 2x.

Step 3: Find the derivative of v with respect to x: v' = d(200 - x/3)/dx = -1/3.

Step 4: Apply the product rule:[tex]R'(x) = u'v + uv' = (2x)(200 - x/3) + (x^2)(-1/3).[/tex]

Step 5: Simplify[tex]R'(x): R'(x) = 400x - (2/3)x^2 - (1/3)x^2.[/tex]

Step 6: Combine like terms: [tex]R'(x) = 400x - (1/3)x^2 = 400x - x^2.[/tex]

So, the sensitivity R'(x) to the drug is given by [tex]R'(x) = 400x - x^2/3[/tex].

To know more about sensitivity refer here:

https://brainly.com/question/31193557

#SPJ11

Answer:

[tex]45,60[/tex]

Step-by-step explanation:

[tex]\mathrm{Let\ the\ two\ numbers\ be\ 3x\ and\ 4x.}\\\mathrm{Then,}\\\mathrm{Product\ of\ two\ numbers=their\ H.C.F\times \their\ L.C.M}\\\mathrm{3x(4x)=15(180)}\\\mathrm{or,\ 12x^2=2700}\\\mathrm{or,\ x^2=225}\\\mathrm{or,\ x=15}\\\mathrm{First\ number=3x=3(15)=45}\\\mathrm{Second\ number=4x=4(15)=60}\\\mathrm{Hence\ the\ two\ numbers\ are\ 45\ and\ 60.}[/tex]

A cube 4 in. on an edge is given a protective coating 0.1 in. thick, then the production manager should order approximately 98,400 square inches of coating for 1000 such cubes.

To calculate the amount of coating required for 1000 cubes, we need to find the total surface area of one cube and then multiply it by the number of cubes.

We have,

Edge length of the cube = 4 inches

Thickness of the protective coating = 0.1 inches

Number of cubes = 1000

The total surface area of a cube can be calculated using the formula:

Surface Area = 6 * (Edge Length)^2

In this case, the edge length of the cube is 4 inches, so the surface area of one cube without the coating is:

Surface Area = 6 * (4)^2

Surface Area = 96 square inches

However, we need to account for the coating thickness of 0.1 inches. Since the coating is applied on all sides of the cube, we need to increase the surface area by the coating thickness.

Increased Surface Area = Surface Area + (6 * Edge Length * Coating Thickness)

Increased Surface Area = 96 + (6 * 4 * 0.1)

Increased Surface Area = 96 + 2.4

Increased Surface Area = 98.4 square inches

Now, to calculate the total coating required for 1000 cubes, we multiply the increased surface area by the number of cubes:

Total Coating Required = Increased Surface Area * Number of Cubes

Total Coating Required = 98.4 * 1000

Total Coating Required = 98,400 square inches

Therefore, the production manager should order approximately 98,400 square inches of coating for 1000 such cubes.

To know more about total surface area refer here:

https://brainly.com/question/29122584#

#SPJ11

(a) The measure of angle XZY is 122°.

(b) The measure of angle XWY is 61°.

Given a circle.

Z is the center of the circle.

Given that,

Measure of arc XY = 122°

Measure of an arc is the measure of the central angle formed by the end points of the arc.

So,

∠XZY = 122°

We have the theorem that an angle subtended by an arc of a circle has a measure that is twice the angle where the arc subtends at any other point on the circle.

So,

∠XZY = 2 ∠XWY

∠XWY = 122 / 2 = 61°

Learn more about Subtended Angles here :

https://brainly.com/question/23247585

#SPJ1

The radius r ≈ 0.4233 cm and the surface area of the bearing isA = 4πr²≈ 2.833 cm²

a) Weight of a bearing in terms of its surface area can be obtained by replacing r by √(A/4π) in the formula for W which is W= 4/3 πpr^3  where p is the density of the steel.How to express the weight W of a bearing in terms of its surface area A?By substitution, we have, W = (4/3)πp (√(A/4π))^3W = (4/3)πp (√(A/π))^3W = (4/3)πp (√A)^3/π2W = (4/3)πp (√A)^3 / 4πW = πp/3 √A^3Where W is the weight of the bearing, p is the density of the steel and A is the surface area of the bearing.b) Surface area of a bearing in terms of its weight can be obtained by isolating A from the equation A = 4πr^2; since r = [3W/4πp]^(1/3).What is the bearing's surface area A in terms of its weight?

From the formula for r, we have:r = [3W/4πp]^(1/3)Now, substituting r in the formula for the surface area, we have:A = 4πr^2A = 4π ([3W/4πp]^(1/3))^2A = 4π [3W/4πp]^(2/3)A = 3^(2/3) π^(1/3) W^(2/3) / p^(2/3)Hence, the surface area A of a bearing can be expressed in terms of its weight W as follows:A = 3^(2/3) π^(1/3) W^(2/3) / p^(2/3)c) Given, p = 7.85 g/cm³ and W = 0.62g; to find A.According to the problem, W = πp/3 r³; where p = 7.85 g/cm³ and W = 0.62g => r³ = 0.23837...∴r = 0.62 / {π (7.85/3)}^(1/3)≈ 0.4233Therefore, the radius r ≈ 0.4233 cm and the surface area of the bearing isA = 4πr²≈ 2.833 cm²

Learn more about Density here,What is the density ?

https://brainly.com/question/1354972

#SPJ11

The steady-state response to the given input function is zero.

To find the steady-state response Yss to the given input function f(t), we need to apply the input to the transfer function and take the Laplace transform of both sides of the resulting equation. Then, we can find the value of Yss using the final value theorem.

In this case, the transfer function is T(s) = 3/(s+3) and the input function is f(t) = 9sin(2t+8.1).

Taking the Laplace transform of both sides, we get:

Y(s)/F(s) = T(s) = 3/(s+3)

Multiplying both sides by F(s), we get:

Y(s) = (3F(s))/(s+3)

Using the inverse Laplace transform, we get:

y(t) = 3e^(-3t)u(t) * f(t)

where u(t) is the unit step function.

To find the steady-state response Yss, we apply the final value theorem, which states that:

Yss = lim(t->∞) y(t)

Since the exponential term decays to zero as t goes to infinity, we can ignore it when taking the limit. Therefore:

Yss = lim(t->∞) 3u(t) * f(t)

Since the input function is periodic with period pi, the limit exists and is equal to the average value of the function over one period:

Yss = (1/pi) ∫(0 to pi) 3sin(2t+8.1) dt

Using trigonometric identities, we can simplify this to:

Yss = (3/pi) ∫(0 to pi) sin(2t)cos(8.1) + cos(2t)sin(8.1) dt

The integral of sin(2t)cos(8.1) over one period is zero, since the sine function is odd and the cosine function is even. Therefore:

Yss = (3/pi) ∫(0 to pi) cos(2t)sin(8.1) dt

Using the substitution u = 2t, du = 2 dt, we can rewrite this integral as:

Yss = (3/2pi) ∫(0 to 2pi) cos(u)sin(8.1) du

Using the identity sin(a+b) = sin(a)cos(b) + cos(a)sin(b), we can rewrite this as:

Yss = (3/2pi) sin(8.1) ∫(0 to 2pi) cos(u) du

The integral of cos(u) over one period is zero, since the cosine function is even. Therefore:

Yss = 0

Thus, the steady-state response to the given input function is zero.

Learn more about steady-state here

https://brainly.com/question/15056310

#SPJ11

Assuming that the loan is for the full amount of the house cost ($434,900) and that the interest rate is compounded annually, the calculations are as follows:

For a 20-year mortgage:

10% deposit = $43,490

Loan amount = $391,410

Monthly payment = $2,256.91

Total interest paid over 20 years = $256,847.60

Total cost of the mortgage = $698,247.60

For a 30-year mortgage:

10% deposit = $43,490

Loan amount = $391,410

Monthly payment = $1,953.44

Total interest paid over 30 years = $333,038.40

Total cost of the mortgage = $767,448.40

To learn more about interest rate click here : brainly.com/question/15548383

#SPJ11

The answer is as follows.List 1: 2, 2, 2, 12, 17List 2: 0, 1, 5, 10, 19List 3: 3, 4, 5, 6, 7

To list 5 numbers which have a mean of 7 is an easy task. We will get 5 numbers whose average is 7. Each of the three lists will have different 5 numbers that will make up the mean as 7. We can take any values for this, and the sum of the values should be 35. So, let's choose 5 random numbers for this task such that their sum is 35: List 1: 2, 2, 2, 12, 17List 2: 0, 1, 5, 10, 19List 3: 3, 4, 5, 6, 7We have listed three different sets of five numbers such that the mean of each set is 7. These values will be different for each list. Hence, the answer is as follows.List 1: 2, 2, 2, 12, 17List 2: 0, 1, 5, 10, 19List 3: 3, 4, 5, 6, 7

Learn more about Value here,How do you calculate present value?

https://brainly.com/question/30390056

#SPJ11

The proposition r - s is false, because both r and s are true.

The proposition r is "35 + 34 + 3 is greater than 341" and the proposition s is "3.1025 x [tex]10^8[/tex]equals 341".

To express the proposition r - s, we subtract the proposition s from the proposition r. Therefore,

r - s: "35 + 34 + 3 is greater than 341 and 3.1025 x [tex]10^8[/tex]does not equal 341"

Option A is incorrect because it includes the proposition s as being equal to 341, which is not true.

Option B is incorrect because it suggests that either proposition r or proposition s is true, but that is not what the proposition r - s means.

Option C is incorrect because it reverses the order of the propositions in r - s.

Option D is correct because it correctly expresses the proposition r - s. It states that if proposition r is true (i.e. 35 + 34 + 3 is greater than 341), then proposition s must be false (i.e. 3.1025 x 1[tex]0^8[/tex] does not equal 341).

As for the truth value of r and s, we can evaluate them as follows:

r: 35 + 34 + 3 = 72, which is indeed greater than 341, so r is true.

s: 3.1025 x [tex]10^8[/tex]is not equal to 341, so s is true.

for such more question on  proposition

https://brainly.com/question/870035

#SPJ11

hi! please see attached!

Answer:

answer is x=3

Step-by-step explanation:

Given the quadratic equation

x^2 − 6x + 9 = 0

The standard form of quadratic equation is

ax^2+bx+c=0

the quadratic formula is

x={-b+-sqrt(b^2-4ac)}/(2a)

Here,

a=1 b=-6 and c=9

so

x={-(-6)+-sqrt((-6)^2-4(1)(9))}/(2(1))

x={6+-sqrt(36-36)}/(2)

x=6/2=3

therefore,x=3

A rectangular cross-section perpendicular to the base will reveal a rectangle as the shape.

A rectangle best describes the cross-section cut perpendicular to the base of a right rectangular prism. A cross-section is a 2D shape obtained by cutting through a 3D object.

A right rectangular prism is a 3D shape that has rectangular sides that meet at right angles. The base is the cross-section of the prism, and it is a rectangle since it has four sides, and its opposite sides are equal and parallel to each other.

Moreover, when a cross-section is cut perpendicular to the base of a right rectangular prism, the resulting shape will always be a rectangle.

Basically, a rectangular cross-section perpendicular to the base will reveal a rectangle as the shape. Hence, the answer is the rectangle.

To learn about the rectangular prism here:

https://brainly.com/question/477459

#SPJ11

Thus, the gage pressure exerted on the reservoir of the inclined manometer is 17.5 Pa.

To determine the gage pressure exerted on the reservoir of an inclined manometer, we need to use the following formula:

ΔP = ρghsin(θ)

Where:
- ΔP is the pressure difference between the two arms of the manometer
- ρ is the density of the fluid
- g is the acceleration due to gravity
- h is the height difference between the two arms of the manometer
- θ is the angle of inclination

In this case, we are given that the fluid has a specific gravity of 0.7, which means that its density can be calculated as:

ρ = specific gravity x density of water
ρ = 0.7 x 1000 kg/m³
ρ = 700 kg/m³

We are also given that the manometer reads 10.2cm, which represents the height difference between the two arms of the manometer.

Finally, we are told that the manometer is inclined at an angle of 15 degrees.

Using these values, we can plug them into the formula and solve for ΔP:

ΔP = ρghsin(θ)
ΔP = 700 kg/m³ x 9.81 m/s² x 0.102 m x sin(15°)
ΔP = 17.5 Pa

Therefore, the gage pressure exerted on the reservoir of the inclined manometer is 17.5 Pa.

Know more about the gage pressure

https://brainly.com/question/13390708

#SPJ11

To find the value of h, we can use the given information about the perimeter of the pentagon and the lengths of its sides.

The perimeter of the pentagon is given as 10.5 centimeters. Four sides of the pentagon have the same length, which we'll denote as h centimeters. The remaining side has a length of 1.7 centimeters.

The perimeter of a pentagon is the sum of the lengths of all its sides. In this case, we can set up an equation using the given information:

4h + 1.7 = 10.5

To solve for h, we can isolate the variable by subtracting 1.7 from both sides of the equation:

4h = 10.5 - 1.7

Simplifying the right side:

4h = 8.8

Finally, we divide both sides of the equation by 4 to solve for h:

h = 8.8 / 4

Calculating the result:

h = 2.2

Therefore, the value of h is 2.2 centimeters.

Learn more about pentagon here:

https://brainly.com/question/27874618

#SPJ11

The standard normal random variable, also known as the Z-score, has a mean of 0 and a standard deviation of 1. In order to find the probability of x being less than 1, we need to calculate the area under the standard normal distribution curve up to 1. We can do this using a Z-table or a calculator.

The Z-score for x being less than 1 is (1-0)/1, which is 1. Using a Z-table, we can find the corresponding area under the curve as 0.8413. This means that the probability of x being less than 1 is 0.8413 or 84.13%.

The standard normal distribution is a bell-shaped curve that represents the probability distribution of all possible values of a random variable with a mean of 0 and a standard deviation of 1. The curve is symmetrical around the mean and the total area under the curve is equal to 1.

The Z-score is a measure of how many standard deviations a data point is from the mean. It can be calculated using the formula:

Z = (x - μ) / σ

where x is the data point, μ is the mean, and σ is the standard deviation.

To find the probability of a Z-score being less than a certain value, we can use a Z-table or a calculator. The Z-table provides the area under the curve up to a certain Z-score, while the calculator can calculate the probability directly.

In conclusion, the probability of a standard normal random variable x being less than 1 is 0.8413 or 84.13%. This can be calculated using a Z-table or a calculator by finding the Z-score for x being less than 1 and then finding the corresponding area under the standard normal distribution curve. The Z-score is a measure of how many standard deviations a data point is from the mean and can be used to calculate probabilities for normal distributions.

To know more about probability visit:

https://brainly.com/question/30034780

#SPJ11

If the linear system 6x-8y-10z=-48k, -5x+7y+9z=0, and -3x+4y+hz=0 has infinitely many solutions, x = 6(4) + z = 24 + z , y = -7/5 - z , z is free ,h=2 then k=4 and h=2.

We can rewrite the system of equations as an augmented matrix [A|B], where A is the coefficient matrix and B is the column vector on the right-hand side:

[ 6  -8 -10 | -48k ]

[-5   7   9 |   0  ]

[-3   4   h |   0  ]

We can perform row operations on the matrix to put it in reduced row echelon form, which will allow us to determine the solutions of the system. After performing row operations, we obtain:

[ 1   0  -1 |  6k ]

[ 0   1   1 | -7/5]

[ 0   0  h-2 |  0  ]

From the last row of the matrix, we see that h-2=0, which implies that h=2. From the first two rows of the matrix, we can see that x- z=6k and  y+ z=-7/5. Since the system has infinitely many solutions, we can express x and y in terms of z, giving:

x = 6k + z

y = -7/5 - z

Substituting these expressions into the second row of the matrix, we obtain:

-5(6k+z) + 7(-7/5 - z) + 9z = 0

Simplifying this equation gives:

-30k - 10z - 7 + 9z = 0

Solving for k gives k=4.

Therefore, the solutions of the system are:

x= 6(4) + z = 24 + z

y = -7/5 - z

z is free

h=2

Learn more about linear system here:

https://brainly.com/question/26544018

#SPJ11

The given sequence 11, 20, 29, 38 does form an arithmetic sequence. The common difference between consecutive terms can be determined by subtracting any term from its preceding term. In this case, the common difference is 9.

An arithmetic sequence is a sequence of numbers in which the difference between consecutive terms remains constant. In other words, each term in the sequence is obtained by adding a fixed value, known as the common difference, to the preceding term. If the sequence follows this pattern, it is considered an arithmetic sequence.

In the given sequence, we can observe that each term is obtained by adding 9 to the preceding term. For example, 20 - 11 = 9, 29 - 20 = 9, and so on. This consistent difference of 9 between each pair of consecutive terms confirms that the sequence is indeed arithmetic.

Similarly, by subtracting the common difference, we can find the preceding term. In this case, if we add 9 to the last term of the sequence (38), we can determine the next term, which would be 47. Conversely, if we subtract 9 from 11 (the first term), we would find the term that precedes it in the sequence, which is 2.

In summary, the given sequence 11, 20, 29, 38 is an arithmetic sequence with a common difference of 9. The common difference of an arithmetic sequence allows us to establish the relationship between consecutive terms and predict future terms in the sequence.

Learn more about arithmetic sequence here:

https://brainly.com/question/28882428

#SPJ11

The correct answer is a. Library card.

It is not an acceptable form of I. D. for opening a savings account. Library card is not an acceptable form of I. D. for opening a savings account. A driver’s license, passport, or military I. D. card can be used as a form of I. D. for opening a savings account. A library card does not provide sufficient identification to open a savings account. A driver’s license, passport, or military I. D. card, on the other hand, is a legal form of I. D. that can be used to open a savings account. When opening a savings account, the bank needs to ensure that you are who you say you are. Therefore, a library card cannot be accepted as a valid form of I. D. because it does not provide a photograph or other important identifying information.

Know more about Library here:

https://brainly.com/question/28918770

#SPJ11

Jamal's thinking is incorrect. The correct amount of flour he needs is 5 cups.

To find the correct amount of flour, in cups, that Jamal needs. He thought that two and a half cups of flour were needed, but his thinking is incorrect.

To find the correct amount of flour, we must remember that the recipe requires a ratio of 2 cups of flour per 1 cup of water. If we multiply 2 cups by 2.5 cups of water, we get 5 cups of flour. Thus, Jamal needs 5 cups of flour.

Equations act as a scale of balance. If you've ever seen a balancing scale, you know that it needs to have an equal amount of weight on both sides in order to be deemed "balanced".

The scale will tip to one side if we just add weight to one side, and the two sides will no longer be equally weighted. Equations use the same reasoning.

Anything on one side of the equal sign must have the exact same value on the opposite side in order for it to not be considered unequal.

Know more about amount, here:

https://brainly.com/question/30690010

#SPJ11

The inequalities that could be used to solve for x; the number of school buses still needed to transport all of the students is x > 3

The number of students still needing transportation is: 400 - 265 = 135

The number of school buses still needed to transport all of the students:

135 ÷ 45 = 3

Therefore, the principal still needs 3 more school buses to transport all of the students.

The inequality that could be used to solve for x: x > 3

This inequality represents the number of buses needed (x) as being greater than 3

Learn more about inequality at https://brainly.com/question/24372553

#SPJ1

The dot product of two vectors ~u and ~v is defined as ~u · ~v = ||~u|| ||~v|| cosθ, where ||~u|| and ||~v|| are the magnitudes of ~u and ~v, respectively, The statement is false. It is not necessarily true that either ~u or ~v equals the zero vector if ~u · ~v = 0.

The dot product of two vectors ~u and ~v is defined as ~u · ~v = ||~u|| ||~v|| cosθ, where ||~u|| and ||~v|| are the magnitudes of ~u and ~v, respectively, and θ is the angle between ~u and ~v. If ~u · ~v = 0, then cosθ = 0, which means that θ = π/2 (or any odd multiple of π/2). This implies that ~u and ~v are orthogonal, or perpendicular, to each other.

In general, if ~u · ~v = 0, it only means that ~u and ~v are orthogonal, and there are infinitely many non-zero vectors that can be orthogonal to a given vector. Therefore, we cannot conclude that either ~u or ~v is the zero vector based solely on their dot product being zero.

However, it is possible for two non-zero vectors to be orthogonal to each other. For example, consider the vectors ~u = (1, 0, 0) and ~v = (0, 1, 0). These vectors are non-zero and orthogonal, since ~u · ~v = 0, but neither ~u nor ~v equals the zero vector.

Therefore, the statement that ~u · ~v = 0 implies ~u = ~0 or ~v = ~0 is false.

Learn more about dot product here:

https://brainly.com/question/30404163

#SPJ11

[tex]\begin{aligned}&7x+39\geq53\\&7x\geq14\\\\&16x+15 > 317\\&16x > 302\\&x > \dfrac{302}{16}\\&x > \dfrac{151}{8}\end{aligned}[/tex]