Can someone draw me this on isometric paper or computer plz I’ll give brainlist and points I’ll work to get you allot of points plz
Answer:
wish I could do that instead of my math homework :(
Explanation:
Answer:
This is easy
Explanation:
I will draw it.
Wind resistance _____ as speed increases.
A. increases slowly
B. increases dramatically
C. decreases slowly
D. decreases dramatically
Answer:
B
Explanation:
Which of the following describes what industrial engineers do?
they design chips and circuit boards
they design and construct large structures
they develop new medical devices
they create and interpret design specs
Answer:
B
Explanation:
Can someone draw me this plz I’ll give brainlist and points I suck at drawing so._.ill give brainlist and 40 points Plz send a picture of it so I can use it for the assignment
Answer:
on computer or paper?
Explanation:
What type of engineer develops and tests catalytic converters for automobile engines?
agricultural
mechanical
civil
electrical
When using a Drill Press the speed of the drill should be
O a. slowed to be neat and safe
b. made faster to finish quicker
c. left alone, the speed does not matter
d. adjusted based on the hardness of the material
DRIVERS ED
You are the passenger in a truck that approaches a flashing red railroad signal. The driver looks at you and says, "Dare me to drive around this gate before the
train comes?" What would be your advice to the driver if you want to get to your destination safely?
Yeah! Go for it, you can beat the train!
Sure, go ahead, the train doesn't seem to moving that fast anyway
You need to start slowing down, it's dangerous and illegal to drive around or under an active crossing gate.
Answer:
You need to start slowing down, it's dangerous and illegal to drive around or under an active crossing gate.
Explanation:
No matter what even if u are impatient when those lights start flashing u need to just immediately stop and just wait for it to pass. that's how many crashed have happen cause people want to play "let's race the train and see if i can make it". just because the train looks slow and looks as if it isn't moving that fast it's going atleast 190-200 mph if it's a high speed and no matter what u cant escape it. We want u home in one piece, just wait !!
A material's Unwillingness to
be drawn, stretched or formed.
Breaks easily
Answer:
Brittle
Explanation:
A brittle material is one that shows unwillingness to be drawn, stretched or formed. These materials are opposite of ductile ones{copper & aluminum} that can be formed into sheets or drawn into wires. A brittle material is hard but liable to break easily. Example of material include : cast iron, ceramics and concrete.
What is 7-?=4 i need help
Answer:
3
Explanation:
7-3=4
Answer:
3
Explanation:
Because when you do 7 - 3 it gives you 4. You check this by adding 4 to 3 and you will get 7. Also you can figure it out the number by subtracting 7 and 4 to get your answer.
Your answer will be 3.
I hope this helped. I am sorry if you get this wrong. Have a wonderful day.
how to use clean a range
Why is the definition for second based on the Cesium 133 atom?
The rate of vibrations of the atoms is fixed.
The rate of vibrations of the atoms is consistent.
The rate of vibrations of the atoms is precise.
The rate of vibrations of the atoms is easily observed.
Answer:
The rate of vibrations of the atoms is consistent
Explanation:
A second is defined as 9,192,631,770 periods of the radiation corresponding to the transition between the two hyperfine levels of the ground state of the caesium 133 atom.
The definition applies when the atom is in isolation at a temperature of absolute zero. Adjustments must be made for the conditions that can be maintained in practice.
Such radiation is determined by the laws of quantum mechanics, so is extremely consistent.
Which option should the engineers focus on as they develop the train in the following scenario?
Richmond, Virginia, has recently approved the construction of a metro system throughout part of the city. As engineers study other
metro lines, they notice that there is an extreme amount of energy lost as the trains start and stop.
Engineers can design a train with additional valves to increase energy.
O Engineers can design a train with additional fluid pumps to increase efficiency
Engineers can design a train with a regenerative braking system.
Engineers can design a train involving larger hydraulic power systems.
lol
Answer:
Engineers can design a train with a regenerative braking system
Explanation:
Assuming the point of the question is that the engineers want to focus on using energy efficiently when starting and stopping, they would likely want to consider a regenerative braking system. Such a system can store energy during braking so that it can be used during starting, reducing the amount of energy that must be supplied by an outside power source.
Answer:
Engineers can design a train with a regenerative braking system
Explanation:
ur mom last night
what's the third pedal for in a vehicle
Manual Transmission Cars typically have 3 pedals which are
1) Brake Pedal
2) Gas / Acceleration Pedal
3) Clutch Pedal
Answer:
thanks bud for the points
I WILL GIVE 30 POINTS AND THE BRAINLIEST Project: Metric Recipe
The movement to have metric measurements as the only unit of measurement in the United States is gaining momentum. Believing in being prepared for the possible day the United States will start the conversion process, you have decided to convert the measurements of all your recipes into metric units. (All your recipes currently have the US customary unit of measurements.) The first recipe you decide to convert is your favorite dish.
assignment Directions
You are to convert your favorite recipe that uses only US customary units of measurements to metric units. Search the Internet to locate a conversion chart to help you convert the measurements. You can also search the Internet to locate a recipe.
assignment Guidelines:
Include the title.
Include the original recipe with the US customary unit of measurements.
Include the recipe with converted measurements.
Include a sheet that shows your conversion calculations.
Use a recipe that has at least ten ingredients.
For extra credit you can make the dish, take a picture or video of it, and submit that to your teacher.
Your project should be:
well-organized
contain appropriate language
contain proper grammar, punctuation, and spelling
contain information from credible sources. (Only use credible sources when researching topics. A credible source provides accurate information on the subject matter. If you are using information from a blog, identify the author and check to see if the author is an expert in the field. Some credible sources are government agencies (.gov) educational articles (.edu), and mental health journals.)
Submission Requirements:
Your project should be submitted electronically, double-spaced if it is a writing assignment, submitted by the due date set by the instructor, and original. If direct quotations are included, they should be cited. If you experience technical difficulties submitting your project, inform your instructor right away. Finally, your instructor will inform you how to name the files you submit
Answer:Recipes often need to be adjusted to meet the needs of different situations. The most common reason to adjust recipes is to change the number of individual portions that the recipe produces. For example, a standard recipe might be written to prepare 25 portions. If a situation arises where 60 portions of the item are needed, the recipe must be properly adjusted.
Explanation:
Why is it important to keep hand tools free of oil and grease?
Answer:
keeps it from rusting
Explanation:
Looking at what others in the engineering field have done to solve problems is called?
A.swiping.
B.force fit.
C.inversion
D.plagiarism.
Answer:
Swiping
Explanation:
One of the methodologies we use to solve problems
What equipment is generally used in the tool room to cut high speed tool bits?
Group of answer choices
Abrasive saw
Band saw
Torch
Hack saw
Answer:
The answer is A Abrasive Saw
Many industries require that engineers become licensed by passing two examinations administered by the state. Which of the following identifies the exam they need to pass first?
Online Institute of Engineers (OIE) exam
Fundamentals of Engineering (FE) exam
Professional Engineering (PE) exam
Professional Engineering Fundamentals (PEF) exam
Answer:
according to my calculation the answer is PE
Explanation:
Answer:
FE
Explanation:
Many industries require that an engineer become a licensed engineer by passing two examinations administered by the state. The first is the Fundamentals of Engineering (FE) exam, which can be taken immediately after graduation. The second is the Professional Engineering (PE) exam, which is taken after the engineer has acquired several years of work experience.
Which option identifies the type of engineer described in the following scenario?
A team of engineers is working on a project to design a new medical drink to fight the AIDS epidemic in Africa.
electrical
mechanical
chemical
agricultural
Answer:
i do believe that would be chemical
Explanation:
what are the three basic electrical characteristics of a complete electric circuit?
Answer:
Explanation:
A simple electric circuit consists of a source (such as a battery), wires as conducting medium and a load (such as a light bulb). The battery provides required energy for flow of electrons, to the light bulb.
Answer:
Every electric circuit, regardless of where it is or how large or small it is, has four basic parts: an energy source (AC or DC), a conductor (wire), an electrical load (device), and at least one controller (switch).
Explanation:
The engineer who would be held accountable for a design flaw in a bridge
5 points
Chemical Engineer
Mechanical Engineer
Electrical Engineer
Civil Engineer
Answer:
product safety engineers
Explanation:
fax.
Answer:
B. Civil Engineers
Explanation:
took the test
Give an example of how the fields of science, technology, and mathematics are commonly used when building a highway
Answer:
Engineering is the application of science and math to solve problems. ... Engineers use science and math to come up with practical solutions to problems. ... Station, but they are also building maps to the human genome and better, ... work in businesses related to their areas of specialization;
Example
hope this helps
3. All of the following are wire protection devices except:
(A) heat shrink tubing.
(B) Flux
(C)liquid electrical tape,
(D) wiring harness,
Answer:
c is the onr correct answer
Answer:
liquid electrical tape
Explanation:
A team of engineers is tasked with designing a hydraulic engine for a motorboat that is as efficient as possible. Identify three of the
seven design phases, and explain why they are individually important in the design process.
Help ASAP!
Answer:
Driving surface area as subject to differential pressuresHow to achieve continuous rotationMechanical connectionsExplanation:
The general stages of thinking when designing a system are;
First understanding the problem that requires you to design a solutionDefining the problem that needs to be solved. In this case is to design an efficient hydraulic engine for a motorboatResearch to find any available solutions for similar problemsIdea of the solutionA prototype to try solve the challengeSelecting and adjusting the prototype as you implement the solution.For a hydraulic engine design, the following designing parts are vital;
Driving surface area as subject to differential pressuresHow to achieve continuous rotationMechanical connectionPressures are important due to motor displacements. Fuel burns in the cylinder to cause power through fuel gases burning and expansion which is the four-stroke cycle. Continuous rotation will come in the design considerations through reciprocating motions of pistons into rotary motions. Mechanical connections are vital especially in crank shaft turns, gear box that turns horizontal motions to spinning motions and finally the propeller that drives the boat on the water.
Answer:
Which of the following describes efficiency?
the ability to increase heat production
the ability to increase productivity
the ability to complete fuel extraction safely
the ability to produce something without waste
Explanation:
what is the main job of a cylinder head
Answer: The function of cylinder head is to seal cylinder, form combustion space with piston, and bear the action of high temperature and high pressure gas. The cylinder head bears the mechanical load caused by the gas force and fastening the cylinder bolt, and also bears the high heat load because of the contact with the high temperature gas.
The main function of a cylinder head is to control airflow in and out of the cylinders, as well as fuel deployment.
The cylinder head is the part of an internal combustion engine that sits above the cylinders on the top of a cylinder block.The combustion gas, coolant and lubricating oil can flow freely in the cylinder head.The cylinder head is composed of the valvetrain housing, the head cover, and the combustion chamber.In conclusion, the main function of a cylinder head is to control airflow in and out of the cylinders, as well as fuel deployment.
Learn more in:
https://brainly.com/question/7441176
Which of these devices controls the flow of coolant through a cooling system based on temperature?
Answer:
Thermostat
Explanation:
At optimum temperature, the thermostat controls the flow of engine coolant to the radiator so that the engine continues to operate at optimum temperature. (Wikipedia)
how has technology changed since the introduction of semiconductors.
Answer:
It has raised and evolved by being able to create different valuabes
and functionsExplanation:
what are example for mantle
The definition of a mantle is a shawl or a cloak. An example of a mantle is a fancy shawl worn over a cocktail dress.
Which verbal communication technique is best suited to getting to know someone you just met?
O Open-ended questioning
O Closed-ended questioning
O Conflict resolution
O Mediation
Answer:
Closed-ended questioning
Explanation:
"Closed-ended questioning" is a type of questioning that requires a short response/answer, such as a one-word answer or a "Yes" or "No." This is a suitable type of questioning when meeting a person for the first time, since it is not appropriate yet to be questioning about lengthy topics.
Examples of this type of questioning:
How old are you?
Where do you live?
Do you like having a pet?
Liz is creating a moving fluid system. Which of the following describes what she will need to install to create motion?
Answer:
Actuator
Explanation: Just did an assignment And got correct!
Answer:
acutator
Explanation: