If the reaction has a 87% yield, then it will produce 1392 grams of CO₂.
What are limiting reactants?The limiting reactant, also known as the limiting reagent, is a substance in a chemical reaction that is fully consumed before the other reactants and determines the maximum amount of product that can be formed. In a reaction mixture, the limiting reactant is the one that runs out first and therefore limits the amount of product that can be formed.
The amount of limiting reactant in a reaction determines the amount of product that can be formed, and the amount of other reactants will be left over. If the reaction yields 87%, it will generate 1600 x 87% = 1392 grams of CO2.
Learn more on limiting reactants here: https://brainly.com/question/14222359
#SPJ1
How do you read Lehninger's Principles of Biochemistry?
Take up the book to read, look over the contents, read the introduction and conclusion, and then read a few sections from the main body. Finally, since this is your first reading, read the book cover to cover without making any notes or checking anything up.
To read Lehninger's Principles of Biochemistry, you should follow these steps:
1. Begin by reading the introduction to each chapter to get an overview of the main concepts and themes that will be covered.
2. Look at the chapter headings and subheadings to get an idea of the organization of the material.
3. Pay attention to any diagrams or tables that are included, as these can help to visualize complex concepts.
4. Take notes as you read, and make sure to highlight any key terms or important concepts.
5. Practice problems and review questions at the end of each chapter can also help to reinforce your understanding of the material.
By following these steps, you can effectively read and understand Lehninger's Principles of Biochemistry.
To know more about Biochemistry here:
https://brainly.com/question/13132811#
#SPJ11
what property of water cause water to form a curved shape on the penny?
The property of water that causes it to form a curved shape on a penny is surface tension.
Surface tension is the cohesive force that exists between the water molecules at the surface of the liquid, causing them to stick together and form a "skin" or surface film. This property arises due to the hydrogen bonding between water molecules, which creates a net inward force that reduces the surface area of the liquid, making it behave as if it has an elastic film stretched across it.
When a penny is placed on a flat surface and water droplets are added to it, the surface tension of the water causes it to form a nearly spherical shape on the penny. The cohesive forces of the water molecules pull the liquid into a shape with the least amount of surface area, which is a sphere, and the penny acts as a support that helps maintain the spherical shape of the water droplet. This surface tension phenomenon can be observed in various everyday situations, such as the formation of raindrops or the behavior of soap bubbles.
Learn more about cohesive force
brainly.com/question/9189639
#SPJ4
An unknown compound with a molar mass of 60. 05 g/mol consists of 40. 0% c, 6. 71% h, and 53. 29% o by mass. Find the molecular formula for the compound.
With a molar mass of 60.05 g/mol and a mass composition of 40. 0% c, 6. 71% h, and 53. 29% o, the compound has the molecular formula C3H6O2.
The percentage of each element's composition must first be converted into moles before the molecular formula can be determined. Divide the molar mass by the molecular mass to get the total number of moles in the compound. The compound's molecular mass is determined by combining the atomic masses of each element.
By dividing the moles of each element by the total moles in the compound, the relative numbers of each element can be determined after the moles of each element have been determined. After that, the compound's molecular formula is determined by multiplying the relative number of each element by the smallest integer that will produce whole numbers.
The molecular formula for this substance is C3H6O2 because the smallest integer for C, H, and O is 3, while the smallest integer for O is 2.
Learn more about Moler Mass:
https://brainly.com/question/837939
#SPJ4
Which has the most thermal energy?
Answer:
Explanation:
If all other conditions are the same, substances in gas form have the most thermal energy, followed by liquids, then solids. Temperature can be measured with a thermometer. The matter inside a thermometer expands as its particles gain thermal energy and move.
What allows us to convert from moles of one substance to moles of another substance? a) Formula mass b) Molecular mass c) A balanced chemical equation d) A conversion table
The moles of any two substances involved in a chemical reaction are connected by a conversion factor called a mole ratio. The numbers in a conversion factor are provided by the coefficients of the balanced chemical equation.
What is Molecular mass?A given molecule's mass, expressed in daltons, is known as its molecular mass. Because various isotopes of an element are present in distinct molecules of the same substance, their molecular weights might vary. The mass of 6.022 10 23 atoms, molecules, or formula units of a substance are equal to its molar mass, which is the mass of 1 mole of that substance represented in grams per mole. A unit used to describe the masses of individual atoms and molecules is the atomic mass unit (u). The weighted average of the masses of an element's isotopes, or atomic mass, is calculated. The combined masses of a molecule's atoms make up its molecular mass.To learn more about Molecular mass, refer to:
https://brainly.com/question/837939
#SPJ4
All parts of the question.
The substance which is totally consumed when the chemical reaction is complete is known as the limiting reactant. Here HgO is the limiting reactant.
What is theoretical yield?The amount of the product which is predicted by the stoichiometry is called the theoretical yield. A reaction yield is reported as the percentage of the theoretical amount.
% yield = Actual yield / Theoretical yield × 100
a. 11.50 × 1 mol HgO / 216.6 × 1 mol HgCl₂ / 1 mol HgO × 271.5 g HgCl₂ / 1 mol HgCl₂ = 14.41 g HgCl₂
12.46 g Cl₂ × 1 mol Cl₂ / 70.90 g × 1 mol HgCl₂ / 2 mol Cl₂ × 271.5 g HgCl₂ / 1 mol HgCl₂ = 23.85 g HgCl₂
So HgO is the limiting reactant.
b. 11.50 × 1 mol HgO / 216.6 × 1 mol Cl₂O / 1 mol HgO × 86.90 g Cl₂O / 1 mol Cl₂O = 4.61 g Cl₂O
c. 2.99 / 4.61 × 100 = 64.85 %
d. Moles of Cl₂ available - Moles of Cl₂ required = 0.1757 - 0.01062 = 0.1651 moles.
Thus HgO is the limiting reactant.
To know more about limiting reactant, visit;
https://brainly.com/question/26905271
#SPJ1
If 5 moles of hydrogen gas reacts with excess nitrogen gas, how many grams of ammonia gas will be produced?
The mass (in grams) of ammonia, NH₃ that will be produced when 5 moles of hydrogen reacts is 56.61 grams
How do I determine the mass of ammonia produced?First, we shall obtain the moles of ammonia produce from the reaction. Details below:
N₂(g) + 3H₂(g) -> 2NH₃(g)
From the balanced equation above,
3 moles of H₂ reacted to produce 2 moles of NH₃
Therefore,
5 moles of H₂ will react to produce = (5 × 2) / 3 = 3.33 moles of NH₃
Finally, we shall determine the mass of ammonia, NH₃ produced from the reaction. Details below:
Mole of ammonia, NH₃ = 3.33 moles Molar mass of ammonia, NH₃ = 17 g/mol Mass of ammonia, NH₃ =?Mole = mass / molar mass
Cross multiply
Mass = Mole × molar mass
Mass of ammonia, NH₃ = 3.33 × 17
Mass of ammonia, NH₃ = 56.61 grams
Thus, the mass of ammonia, NH₃ is 56.61 grams
Learn more about mass:
https://brainly.com/question/6613610
#SPJ1
Consider the directing effects of the substiuents on salicylamide and predict the possible structures of hte iodination products. Whichdo you think will be the major products?
The amide is the meta directing group. The possible structures of the iodination products are 2-hydroxy-5-iodobenzamide and 2-hydroxy-3-iodobenzamide The major product is 2-hydroxy-5-iodobenzamide.
The hydroxyl group is present on the ring is an activating ring which directs the electrophile to ortho position and the para position. The amide group is the electron withdrawing group which will shows the meta directing effect.
The iodination of the salicylamide generates the two products according to the directing effects that are the 2-hydroxy-5-iodobenzamide and the 2-hydroxy-3-iodobenzamide. From the two products , the 2-hydroxy-5-iodobenzamide is the major product. The reason is because of the steric hindrance.
To learn more about salicylamide here
https://brainly.com/question/26722892
#SPJ4
How to balancing a reaction ?
To balance a chemical reaction, you need to make sure that the number of atoms of each element is the same on both sides of the equation.
Here are the steps to balance a reaction:
1. Write the unbalanced equation using the correct chemical formulas for all the reactants and products.
2. Count the number of atoms of each element on both sides of the equation.
3. Use coefficients (numbers in front of the chemical formulas) to balance the number of atoms of each element. Start with the element that appears the least number of times in the reaction.
4. Check to make sure that the number of atoms of each element is the same on both sides of the equation.
5. Simplify the coefficients if possible (for example, if all the coefficients are divisible by 2, divide them all by 2 to simplify).
Here is an example:
Unbalanced reaction: H₂ + O₂ → H₂O
1. Count the number of atoms of each element:
H: 2 on the left, 2 on the right
O: 2 on the left, 1 on the right
2. Use coefficients to balance the number of atoms of each element:
H₂ + O₂ → 2H₂O
3. Check to make sure that the number of atoms of each element is the same on both sides of the equation:
H: 2 on the left, 4 on the right
O: 2 on the left, 2 on the right
4. Simplify the coefficients if possible:
The coefficients are already as simple as possible, so the balanced reaction is: H₂ + O₂ → 2H₂O
To know more about chemical reaction here:
https://brainly.com/question/29039149#
#SPJ11
how to calculate moles to atoms?
The moles to the atom is that 1 atom of the substance is equals to the 1/ 6.022 × 10²³ moles.
The value of the mole is exactly equal to the number of the atoms in the exactly 12 grams of the pure carbon-12. The 12.00 g C-12 is equals to the 1 mol C-12 atoms and this equals to the 6.022 × 10²³ atoms . The number of particles of the substance in the 1 mole is called as the Avogadro's Number.
The Avogadro's number = 6.022 × 10²³
The number of the moles to the atoms = 1/ 6.022 × 10²³ moles.
The number of the moles is also expressed as :
The number of the moles = mass / molar mass
To learn more about moles here
https://brainly.com/question/26416088
#SPJ4
In H-NMR spectroscopy, which factor determines the shape of the spectra? the number of protons in the macromolecule the energy of a proton's a spin state the transition between a proton's a and B spin states the energy of a proton's B spin state
Factor which determines the shape of the spectra in NMR spectroscopy is b) transition between a proton's α and β.So,correct option is b.
Proton nuclear magnetic resonance (proton NMR, hydrogen-1 NMR, or 1H NMR) is the use of atomic attractive reverberation in NMR spectroscopy as for hydrogen-1 cores inside the particles of a substance, to decide the design of its molecules.[1] In examples where regular hydrogen (H) is utilized, essentially all the hydrogen comprises of the isotope 1H (hydrogen-1; for example having a proton for a core).
Proton NMR spectra of most natural compounds are described by compound changes in the reach +14 to - 4 ppm and by turn coupling between protons. The combination bend for every proton mirrors the wealth of the singular protons.Basic particles have straightforward spectra. The range of ethyl chloride comprises of a trio at 1.5 ppm and a group of four at 3.5 ppm in a 3:2 proportion. The range of benzene comprises of a solitary top at 7.2 ppm because of the diamagnetic ring current.
Hence,correct option is b.
To know more about NMR spectroscopy ,visit here:
https://brainly.com/question/17564948
#SPJ4
(Complete question) is:
In NMR spectroscopy, which factor determines the shape of the spectra?
a)the energy of a proton's β spin state
b)the transition between a proton's α and β spin states
c)the number of protons in the macromolecule
d)the energy of a proton's α spin state
Identify the color absorbed by a solution that appears the color given.
1. Blue=
2. Red=
3. Orange=
4. Green=
A solution that appears blue absorbs orange and that appears red absorbs green and the solution that appears orange absorbs blue and that appears in green absorbs red.
A solution that appears blue absorbs light in the orange range of the visible spectrum.
• A solution that appears red absorbs light in the green range of the visible spectrum.
• A solution that appears orange absorbs light in the blue range of the visible spectrum.
• A solution that appears green absorbs light in the red range of the visible spectrum
The color absorbed by a solution depends on the specific properties of the solute and the solvent in the solution, as well as the wavelength of the light passing through it. When light passes through a solution, certain wavelengths may be absorbed by the solute molecules in the solution, causing the solution to appear colored.
The color that is absorbed by a solution can be determined using a spectrophotometer, which measures the absorbance of light at various wavelengths. The absorbance spectrum of a solution can be used to determine the concentration of a solute in a solution, as well as other properties of the solution, such as its purity and chemical composition.
Learn more about absorbs here:
https://brainly.com/question/6838193
#SPJ4
how many molecules of water are needed to completely hydrolyze a polymer that is ten monomers long?
Nine, with each coupled pair of monomers requiring the hydrolysis of one water.
What is meant by hydrolyze?In general, hydrolysis refers to the breaking of chemical bonds brought about by the presence of water and entails the reaction of an organic compound with water to produce two or more new chemicals.Any chemical reaction in which a water molecule breaks one or more chemical bonds is referred to as hydrolysis. The phrase is commonly used to refer to substitution, elimination, and solvation reactions in which water serves as the nucleophile. Using water to break down a binding is known as hydrolysis.The word "hydrolyze" comes from the Greek words hydro and lysis, which mean "water break." Water (or H2O) separates into two components: a positive hydrogen atom, H+, and a negative hydroxide atom, (OH)-. The word "hydrolysis" literally means "water reaction."To learn more about hydrolyze refer to:
https://brainly.com/question/30468294
#SPJ4
Is NH4+ polar or nonpolar?
The NH4+ molecule is polar.
Polar molecules are those that have an uneven distribution of charge, resulting in a positive and negative side. Nonpolar molecules, on the other hand, have an even distribution of charge and do not have distinct positive or negative sides.
In the case of NH4+, the molecule has a positive charge due to the presence of an extra hydrogen atom. This extra hydrogen atom creates an uneven distribution of charge, making the molecule polar.
Additionally, the four hydrogen atoms are arranged in a tetrahedral shape around the central nitrogen atom, further contributing to the molecule's polarity. Therefore, NH4+ is a polar molecule.
To know more about polarity here:
https://brainly.com/question/3184550#
#SPJ11
an nacl solution is prepared by dissolving 20.0 g nacl in 150.0 g of water at 25°c. what is the vapor pressure of the solution if the vapor pressure of water at 25°c is 23.56 torr?
The vapor pressure of the NaCl solution is 22.66 torr.
What is Vapor Pressure?
It is the result of molecules escaping from the surface of a liquid or solid and entering the gas phase. The vapor pressure is dependent on the temperature and the intermolecular forces between the molecules. As the temperature increases, the vapor pressure of a substance increases as well.
To calculate the vapor pressure of the NaCl solution, we can use Raoult's law, which states that the vapor pressure of a solution is proportional to the mole fraction of the solvent in the solution:
P = X_solvent * P°_solvent
where P is the vapor pressure of the solution, X_solvent is the mole fraction of the solvent (water), and P°_solvent is the vapor pressure of pure water.
moles of NaCl = mass of NaCl / molar mass of NaCl
moles of water = 150.0 g / 18.015 g/mol = 8.326 mol
moles of NaCl = 20.0 g / 58.44 g/mol = 0.342 mol
total moles = moles of water + moles of NaCl = 8.326 mol + 0.342 mol = 8.668 mol
X_water = moles of water / total moles = 8.326 mol / 8.668 mol = 0.962
P = X_water * P°_water
P = 0.962 * 23.56 torr = 22.66 torr
Therefore, the vapor pressure of the NaCl solution is 22.66 torr.
Learn more about Vapor Pressure from given link
https://brainly.com/question/2693029
#SPJ4
What is the Lewis structure of HNO2?
The central N atom in the HNO₂ Lewis structure is sp² hybridized.
The hybridization of N is calculated by the following formula,
H = 0.5(V+M-C+A), where H= hybridization value, V is the number of valence electrons in the central atom, M = monovalent atoms surrounded, C=no. of cation, A=no. of the anion.
H is an s block element with the valence orbital of s and the electronic configuration 1s1. The s block element should fill its s orbital by two electrons in accordance with the octet rule because the s orbital can only hold a maximum of two electrons according to Hund's rule of multiplicity.
To create a strong covalent bond, H and O each share one electron. Now that a bond has been shared, H has two electrons in its valence orbital, completing its octet.
Given that the s orbital only has two electrons and the p orbital has a maximum capacity of six electrons due to its three subshells, the p block element's valence shell should be completed by six electrons.
know more about Lewis structure click here;
https://brainly.com/question/4144781
#SPJ4
what is the bromic acid formula?
The formula of the bromic acid is HBrO₃. IT is also called as the hydrogen bromate.
The Bromic acid, that is also known as the hydrogen bromate, is the type of the oxoacid with the molecular formula of HBrO₃. It will only exists in the aqueous solution. It is the colorless solution that will turns the yellow at the room temperature as it will decomposes to the bromine.
The bromic acid is stable only when in the very dilute solutions, it is usually produced by reaction of the barium bromate with the sulfuric acid. It is used as the oxidizing agent in the manufacture of the dyes and the pharmaceuticals.
To learn more about bromic acid here
https://brainly.com/question/11003770
#SPJ4
What are the types of interstellar cloud?
Interstellar clouds belong to four different types: diffuse atomic, diffuse molecular, translucent, and dense molecular. The extent of these clouds varies from a few to hundreds of light-years and is composed of gas and a small fraction of dust particles.
Nearly 99% of the interstellar medium is in a gaseous state, with hydrogen making up 90% of the atoms. About half of the gas is linked up in interstellar gas clouds which have different properties counting on the temperature of the gas. In the coldest and densest regions of the interstellar medium, we see clouds whose cores comprise molecular gases, mainly molecular hydrogen (H₂) gas. If the gas cloud is not relatively cold or dense adequately for hydrogen molecules to survive, we end up with a cloud of neutral hydrogen atoms.
To learn more about the interstellar clouds visit here:
https://brainly.com/question/30631889
#SPJ4
Menthol, C10H200, is a compound often
used in creams and lotions for muscle
aches. If there are 10.0 grams of menthol
in a cream, how many hydrogen atoms
are in the menthol sample?
[?] x 10¹²] atoms H
Enter the coefficient in the green blank and the
exponent in the yellow blank. Report your answer
to the appropriate number of significant figures!
Coefficient (green)
Exponent (yellow)
Enter
There are approximately 1.28 x 10²³ hydrogen atoms in 10.0 grams of menthol.
What is menthol?Menthol is chemical compound that is found naturally in peppermint and other similar plants.
molar mass of menthol = (10 x 12.01) + (20 x 1.01) + (2 x 15.99) = 156.27 g/mol
moles of menthol = mass of menthol / molar mass of menthol
moles of menthol = 10.0 g / 156.27 g/mol = 0.0639 mol
number of hydrogen atoms = moles of menthol x number of hydrogen atoms per mole
So, number of hydrogen atoms = 0.0639 mol x 20 = 1.28 mol
Therefore, there are approximately 1.28 x 10²³ hydrogen atoms in 10.0 grams of menthol.
To know more about menthol, refer
https://brainly.com/question/21296029
#SPJ1
1.80 g of an oxide contained 1.40 g of the metal, and 4.50 g of another sample of the oxide contained 3.50 g of the metal. Show that these figures agree with the law of constant composition.
1.80 g of an oxide contained 1.40 g of the metal, and 4.50 g of another sample of the oxide contained 3.50 g of the metal. The Percentage of oxygen is the same in both the above cases. So the law of constant composition is illustrated.
What is the law of constant composition ?The law of definite proportions, also known as Proust's law or the rule of constant composition, states that a chemical compound's components are always contained in a fixed ratio regardless of the source or method of formation (by mass).
Given :
First sample
Oxide = 1.80 g
Oxide contained = 1.40 g
Oxide present = 1.80 - 1.40 = 0.4
Percentage of oxygen in oxide = (0.4)(100%) / 1.80 = 22.22%
Second sample
Oxide = 4.50 g
Oxide contained = 3.50 g
Oxide present = 4.50 - 3.50 = 1
Percentage of oxygen in oxide = (1)(100%) / 4.50 = 22.22%
Thus, the Percentage of oxygen is the same in both the above cases. So the law of constant composition is illustrated.
To learn more about the law of constant composition, follow the link;
https://brainly.com/question/30268209
#SPJ1
Cecile packages snack mix at a health food store. She uses 13 1 3 of her supply of sunflower seeds to make a salted snack mix and 29 2 9 of her supply to make an unsalted snack mix. If cecile uses 10 pounds of sunflower seeds, how many pounds of seeds are in her supply?.
The number of pounds of seeds in her supply is 18 if she uses 1/3 supply to make a salted snack.
The sunflower seed is the seed of the sunflower (Helianthus annuus). There are three types of normally utilized sunflower seeds: linoleic (generally normal), high oleic, and sunflower oil seeds. Every assortment has its own one of a kind degrees of monounsaturated, immersed, and polyunsaturated fats.
Firstly,we need to assume her total supply of sunflower seeds are x
If total supply of seeds are x,in that case
Supply of salted snack = 1/3x
and Supply of unsalted snack = 2/9x
It is given that total pounds of sunflower seed = 10
So,total supply of sunflower seeds is equal to sum of salted snack and unsalted snack.
In other words,Total supply of sunflower seeds = salted snack + unsalted snack
10 = 1/3x + 2/9x
10 = (3x + 2x) / 9
10 = 5/9x
On dividing both sides by 5/9
x = 10 ÷ 5/9
x = 10 × 9/5
x= (10 × 9) / 5
x= 90/5
x= 18
Hence, number of pounds of seeds in her supply is 18
To know more about sunflower seeds ,visit here:
https://brainly.com/question/169553
#SPJ4
Hydrogen and oxygen react under a specific set o conditions to produce water according to the following: 2H2(8) + 02(8) -> 2H20(8).
a. How many moles of hydrogen would be required to produce 5.0 mol of water?
b. How many moles of oxvgen would be required?
Answer:
a. To produce 5.0 mol of water, we need to know the number of moles of hydrogen involved in the reaction. The chemical equation 2H2(g) + O2(g) -> 2H2O(g) tells us that 2 moles of hydrogen react with 1 mole of oxygen to produce 2 moles of water. So, to produce 5.0 mol of water, we need 2.5 moles of hydrogen.
b. If we know the number of moles of hydrogen, we can calculate the number of moles of oxygen required for the reaction. The chemical equation tells us that 2 moles of hydrogen react with 1 mole of oxygen, so if we have 2.5 moles of hydrogen, we would need 1.25 moles of oxygen.
Question 1-14
How does the carbon cycle support the Law of Conservation of Mass?
O The total amount of carbon decreases, as it moves through the carbon cycle.
O
The total amount of carbon does not change as it moves through the carbon cycle.
O The total amount of carbon gradually increases, as it moves through the carbon cycle.
The total amount of carbon changes depending on where it's located in the carbon cycle.
According to law of conservation of mass, the carbon cycle supports the law of conservation of mass as the total amount of carbon does not change as it moves through the carbon cycle.
What is law of conservation of mass?
According to law of conservation of mass, it is evident that mass is neither created nor destroyed rather it is restored at the end of a chemical reaction .
Law of conservation of mass and energy are related as mass and energy are directly proportional which is indicated by the equation E=mc².Concept of conservation of mass is widely used in field of chemistry, fluid dynamics.
Learn more about law of conservation of mass,here:
https://brainly.com/question/15289631
#SPJ9
how to convert moles to atoms calculator?
By using the relation, Atoms = Moles × 6.022×10²³ , we can convert moles to atoms calculator.
What is atom?The smallest unit of matter that may be divided without producing electrically charged particles is the atom. It is also the smallest piece of substance with chemical element-like characteristics. As a result, the atom serves as the fundamental unit of chemistry.
Space makes up the majority of an atom. The rest is made up of an accumulation of electrons that are negatively charged surrounding a nucleus with a positive charge made up of protons and neutrons. Compared to electrons, whose happen to be the lightest charged substances in nature, the nucleus relatively small and dense. By using the relation, Atoms = Moles × 6.022×10²³ , we can convert moles to atoms calculator.
Therefore, by using the relation, Atoms = Moles × 6.022×10²³ , we can convert moles to atoms calculator.
To know more about atom, here:
https://brainly.com/question/29712157
#SPJ2
Barium metal was quantitatively precipitated from a 1.52 g sample of BaCl2â2H2O. The mass of the barium that was collected was 0.844 g. Calculate the experimental mass percent of barium in the sample.Calculate the theoretical mass percent of barium in BaCl2â2H2O.
This same sample's experimental mass percentage containing barium is 55.526.
What does barium do to the body?Barium compounds which dissolved in water or the stomach when consumed in very large quantities might cause human paralysis or heart rhythm abnormalities. Some people who consumed or drank a significant amount of barium but failed to seek medical attention immediately perished.
Given that a 1.52 g sample of BaCl22H2O quantitatively precipitated barium metal.
This barium that was gathered had a mass of 0.844 g.
We must ascertain the sample's experiment mass percent of barium
Let the barium content be expressed as x/100.
x/100×1.52=0.844
0.0152x=0.844
x=55.526
To know more about barium visit:
brainly.com/question/2572464
#SPJ4
How many c4h10 molecules are contained in 9. 213 g of this compound? how many hydrogen atoms?.
The number of C4H10 molecules and hydrogen atoms in 9.213 g of this compound is 9.48 x 10^23. This can be calculated by using the molecular weight and Avogadro's number.
The molecular weight of C4H10 can be calculated as :
4 x 12.01 + 10 x 1.01 = 58.12 g/mol.Dividing the mass of the sample (9.213 g) by the molecular weight gives us the number of moles of C4H10:
9.213 g ÷ 58.12 g/mol = 0.158 moles.Avogadro's number, which is approximately 6.022 x 10^23, can then be used to calculate the number of C4H10 molecules in the sample:
0.158 moles x 6.022 x 10^23 molecules/mol = 9.48 x 10^22 molecules.The number of hydrogen atoms in the sample can be calculated by multiplying the number of C4H10 molecules by the number of hydrogen atoms in each molecule, which is 10:
9.48 x 10^22 molecules x 10 hydrogen atoms/molecule = 9.48 x 10^23 hydrogen atoms.Learn more about Hydrogen Atoms:
https://brainly.com/question/20290989
#SPJ4
A patient's urine sample has a density of 1. 02 g/ml. If 1250 ml of urine was excreted by the patient in one day, what mass of urine was eliminated?.
If 1250 ml of urine was excreted by the patient in one day, then the mass of urine was eliminated is equal to 1275 grams.
Mass per unit of volume is referred to as density. Although the letter D can also be used, the ρ sign most frequently used for density is.
To calculate the substance mass , we use the equation:-
[tex]Density= \frac{mass}{volume}[/tex]
we are given:-
density of patients urine (d)= 1.02g/ml.
mass of liquid (m)= ?
volume of the patients urine (v)= 1250ml.
Put the given values in the equation to get the answer:-
[tex]\frac{m}{1250}=1.02[/tex]
⇒ [tex]m= 1.02l*1250= 1275g.[/tex]
Hence, 1275 grams of urine was eliminated.
To know more about density
brainly.com/question/29775886
#SPJ4
are there any places on earth where the mid-oceanic ridges meet the continent?
Answer:
Yes, there are places on earth where mid-oceanic ridges meet the continents. These areas are known as "continental rift zones" or "divergent plate boundaries," and they occur where tectonic plates are pulling away from each other, causing a rift or a valley to form. As the continental crust thins and stretches, it may be separated by a mid-oceanic ridge or a seafloor spreading center.
One example of a place where a mid-oceanic ridge meets a continent is the East African Rift. This is a divergent boundary where the African Plate is splitting into two parts, and a new ocean is beginning to form. The rift runs through several countries in eastern Africa, including Ethiopia, Kenya, Tanzania, and Mozambique. Another example is the Red Sea, which is a young ocean that formed as the Arabian Plate separated from the African Plate along a divergent boundary.
So, in summary, there are several places on earth where the mid-oceanic ridges meet the continents, forming rift zones or divergent plate boundaries.
of the halogen family, fluorine, chlorine, bromine, and iodine, which would you expect not to produce a positive beilstein test result?
The Beilstein test is a test for halogens, which identifies the presence of halogens in an organic compound. The test is based on the observation that halogen atoms produce a green flame when a compound containing halogens is introduced into a flame.
Of the halogens in the halogen family (fluorine, chlorine, bromine, and iodine), fluorine is the halogen that would not produce a positive Beilstein test result. This is because fluorine is so reactive that it will react with the copper wire used in the test, preventing the green flame from being produced. In contrast, chlorine, bromine, and iodine will react with the copper wire to produce a green flame, indicating the presence of halogens in the compound being tested.
Find more about Beilstein test
brainly.com/question/1417650
#SPJ4
Name the smallest particle of an element that can retain all the chemical properties.?
Atom is the smallest particle of an element that can retain all the chemical properties.
Atom is defined as the smallest part of a substance that cannot be broken down through chemical process. Each atom contains a nucleus (which is its center, and nucleus is made up of protons (positive particles) and neutrons (particles with no charge). Electrons which are negative charged particles, move around the nucleus.
Generally, the electrons which are associated with atoms are found to have measurable properties which exhibit quantization. The electrons are basically found in quantized energy states of the lowest possible energy for the atom, known as ground states.
Learn more about atom from the link given below.
https://brainly.com/question/13654549
#SPJ4