50 points

FIND BD in Traingle round to nearest tenth.

Answer:I think you can say like the most bought music in class B is alternative and the lowest one is classical and so on

Step-by-step explanation:

We will need a sample size of 35 bluejay bills to make a 95% confidence interval estimate of the mean length with a margin of error of 0.6 inches.

We find the sample size required for a 95% confidence interval estimate with a margin of error of 0.6 inches. Here are the terms we need to consider:
Confidence interval:

A range of values within which we can be confident the true population parameter lies.
Margin of error:

The amount added or subtracted from the sample mean to create the confidence interval.
Standard deviation:

A measure of the dispersion of a set of values, denoted as σ.
Sample size:

The number of observations in the sample, denoted as n.
Z-score:

The number of standard deviations a value is away from the mean.
Now let's calculate the sample size, n:
Identify the values from the problem.
- Confidence level: 95%
- Margin of error (E): 0.6 inches
- Population standard deviation (σ): 3 inches.

Find the Z-score for a 95% confidence interval.
For a 95% confidence interval, the Z-score is 1.96 (you can find this value in a Z-score table or through online calculators).
Use the formula to calculate the sample size, n:
n = (Z * σ / E)²
n = (1.96 * 3 / 0.6)²
Calculate n:
n = (5.88)²
n ≈ 34.5744
Round up to the nearest whole number, since we can't have a fraction of a sample.
n ≈ 35.

For similar question on confidence interval.

https://brainly.com/question/16970972

#SPJ11

The solutions to the trigonometric equation 4sin(θ) - 1 = 2sin(θ) + 1 using unit circle are π/2 or 3π/2 (in radians).

To solve the equation 4sin(θ) - 1 = 2sin(θ) + 1, we need to isolate the sine term on one side of the equation.

Here, start by combining like terms

4sin(θ) - 2sin(θ) = 1 + 1

2sin(θ) = 2

Next, we can isolate sin(θ) by dividing both sides by 2

sin(θ) = 1

Now we need to find all possible values of θ for which sin(θ) = 1. Since sine is positive in the first and second quadrants, the solutions will be angles in these quadrants that have a sine value of 1.

In the first quadrant, the reference angle for sin(θ) = 1 is π/2 radians (90 degrees). Therefore, the solution is

θ = π/2

It is in the first quadrant.

In the second quadrant, the reference angle for sin(θ) = 1 is also π/2 radians (90 degrees), but the angle itself is in the range pi to 3π/2. Therefore, the solution is

θ = π + π/2 = 3π/2

It is in the second quadrant.

So the solutions to the equation 4sin(θ) - 1 = 2sin(θ) + 1 are

θ = π/2 or 3π/2 (in radians)

Note that these solutions correspond to the x-coordinates of the points on the unit circle where the sine value is 1.

To know more about trigonometric equation here

https://brainly.com/question/30710281

#SPJ1

XYZ made 883 chairs and sold them at $73 per chair, resulting in a total revenue of $64,459 for the week.

This week, XYZ company produced 883 chairs and sold them at a price of $73 per chair. To calculate the total revenue, we need to multiply the number of chairs sold by the price per chair.

Total revenue = (Number of chairs) × (Price per chair)

In this case, the number of chairs is 883, and the price per chair is $73. So, the calculation for the total revenue will be:

Total revenue = (883 chairs) × ($73 per chair)

After performing the multiplication, we find that XYZ's total revenue for this week is:

Total revenue = $64,459

Thus, XYZ company's total revenue for this week is $64,459, which is a whole number as requested.

To know more about total revenue, refer to the link below:

https://brainly.com/question/30010394#

#SPJ11

The solutions to the given equation correct to the nearest hundredth are approximate x ≈ -8.47 and x ≈ 0.47.

The given equation is x² + 8x = 8. To solve for x using the quadratic formula, we first need to rewrite the equation in the standard form ax² + bx + c = 0, where a, b, and c are constants.

x² + 8x = 8 can be rewritten as x² + 8x - 8 = 0, where a = 1, b = 8, and c = -8. Applying the quadratic formula, we have:

[tex]x = \frac{(-b \pm \sqrt{(b^2 - 4ac)) }}{ 2a}[/tex]

Simplifying the expression inside the square root, we get:

[tex]x = \frac{(-8 \pm \sqrt{(80)})}2\\x = \frac{(-8 \pm 8.94)}2[/tex]

Using a calculator to approximate the solutions to the nearest hundredth, we get:

x= -8.47

x = 0.47

Therefore, the solutions to the given equation correct to the nearest hundredth are approximately x ≈ -8.47 and x ≈ 0.47.

Learn more about Quadratic equations here:

https://brainly.com/question/22364785

#SPJ1

The pattern for the 6th term of the sequence is A₆ = 36

Given data ,

The first term has one dot (1² = 1)

The second term has four dots (2² = 4)

The third term has nine dots (3² = 9)

The fourth term has sixteen dots (4² = 16)

So , the fifth term A₅ = 25

And , from the pattern , the 6th term A₆ = 36

Hence , the 6th term is A₆ = 36

To learn more about geometric progression click :

https://brainly.com/question/1522572

#SPJ1

Parameters are the values that are computed from a complete census, which are considered to be precise and valid measures of the population. So, option(b) is right one.

In statistics, a population parameter is a number that identifies an entire group of people or population. This should not be confused with arguments in other forms of mathematics that refer to values that remain constant for a mathematical function. Note that the population parameter is not a statistic, it refers to data for a sample or group of the population. With good research, we can get statistics that accurately estimate the population. Statistics is a numerical measure described with sample data. Therefore, the parameter is a numerical description of the characteristic of population.

For more information about parameters, visit :

https://brainly.com/question/29344078

#SPJ4

Complete question:

Values that are computed from a complete census, which are considered to be precise and valid measures of the population, are referred to as:

a) statistic

b) parameters

Ploidy level shifts between a pair of species (one diploid, one tetraploid) fit the "allopolyploid hybridization model" very well because it explains the origin of the diploid and tetraploid forms.

The allopolyploid hybridization model proposes that the tetraploid species originated from the hybridization between two different diploid species.

Specifically, the hybridization event resulted in a doubling of the chromosome number, creating a tetraploid individual with four copies of each chromosome.

This event is known as allopolyploidization.

The diploid species that served as the parents of the tetraploid species are not identical to either of the two tetraploid species.

Rather, they are thought to be extinct or still-existing diploid species that hybridized to produce the tetraploid offspring.

The allopolyploid hybridization model explains why the diploid and tetraploid species often have similar morphology and DNA sequences. The diploid parent of the tetraploid species contributes half of the genome, while the other half comes from the other diploid parent.

This hybridization event leads to a mix of the two parent genomes, resulting in a unique genome that can contribute to the formation of a new species.

Overall, the allopolyploid hybridization model provides a plausible explanation for the origin of tetraploid species, and it is supported by extensive genetic and morphological evidence.

For similar questions on Pair of Species

https://brainly.com/question/23887820

#SPJ11

It is not true that for every 7 bars in a pack, there is 1 cinnamon bar.

Let's assume that there are 7 packs, each containing 1 cinnamon bar, 4 honey bars, and 3 peanut butter bars.

Then, the total number of bars in the 7 packs would be:

1 (cinnamon) x 7 packs = 7 cinnamon bars

4 (honey) x 7 packs = 28 honey bars

3 (peanut butter) x 7 packs = 21 peanut butter bars

The total number of bars in the packs would be:

7 cinnamon bars + 28 honey bars + 21 peanut butter bars = 56 bars

So, the ratio of cinnamon bars to the total number of bars would be:

1 cinnamon bar : 56 total bars

This can be simplified to 1/56

To learn more on Fractions click:

https://brainly.com/question/10354322

#SPJ1

The only possible value of rank(A) is 3, and it does not depend on the value of a. Therefore, the answer is: 3

The rank of a matrix is the dimension of the row space or column space of the matrix. To find all possible values of rank(A) as a varies, we can use the determinant of the matrix and the rank-nullity theorem.

The determinant of A is given by:

|A| = a(9a + 2) - 6a + 6(2 + 2a) = 9a^2 + 12a + 12

We can see that |A| is a quadratic polynomial in a, and it is never equal to zero. Therefore, the matrix A is always invertible, and its rank is 3.

Know more about determinant here:

https://brainly.com/question/13369636

#SPJ11

This means that we can be 99% confident that the true standard deviation of the weights of pennies is between 0.0216g and 0.0396g.

To estimate the true standard deviation of the weights of pennies with a 99% level of confidence.

we can use the formula for the confidence interval for a standard deviation, which is:

CI = (sqrt((n-1)*[tex]s^{2}[/tex]/[tex]X^{2}[/tex]_α/2), sqrt((n-1)*[tex]s^{2}[/tex]/[tex]X^{2}[/tex]_1-α/2))

Where CI is the confidence interval, n is the sample size (29 in this case).

s is the sample standard deviation (0.035g).

α is the significance level (0.01 for a 99% level of confidence).

[tex]X^{2}[/tex]_α/2 is the chi-square value at α/2 with n-1 degrees of freedom.

[tex]X^{2}[/tex]_1-α/2 is the chi-square value at 1-α/2 with n-1 degrees of freedom.

Substituting the values in the formula, we get:

CI = (sqrt((29-1)*0.035^2/[tex]X^{2}[/tex]_0.005/2), sqrt((29-1)*0.035^2/[tex]X^{2}[/tex]_0.995/2))

CI = (0.0216, 0.0396)

This means that we can be 99% confident that the true standard deviation of the weights of pennies is between 0.0216g and 0.0396g.

In conclusion, to estimate the true standard deviation of the weights of pennies with a 99% level of confidence, we use the formula for the confidence interval for a standard deviation and substitute the sample size, sample standard deviation, and significance level. The resulting confidence interval gives us a range of values within which we can be confident that the true standard deviation lies.

know more about standard deviation here:

https://brainly.com/question/475676

#SPJ11

The number of possible outcomes on rolling a cube twice is 36

The possible number of outcomes of an experiment are the number of elements in the sample space.

The sample space of rolling a cube twice is given as:

(1,1)   (1,2)   (1,3)   (1,4)   (1,5)   (1,6)

(2,1)   (2,2)   (2,3)   (2,4)   (2,5)   (2,6)

(3,1)   (3,2)   (3,3)   (3,4)   (3,5)   (3,6)

(4,1)   (4,2)   (4,3)   (4,4)   (4,5)   (4,6)

(5,1)   (5,2)   (5,3)   (5,4)   (5,5)   (5,6)

(6,1)   (6,2)   (6,3)   (6,4)   (6,5)   (6,6)

Hence, there are 36 elements in the sample space.

Hence,  the number of possible outcomes on rolling a cube twice is 36

To learn more on probability click:

https://brainly.com/question/11234923

#SPJ1

The probability of any one undergraduate being selected in a random sample of 2550 undergraduates from a population of 25500 can be calculated using the formula:

Probability = Number of individuals in the sample / Total population

In this case, the probability would be:

Probability = 2550 / 25500 = 0.1 or 10%

Therefore, the probability of any one undergraduate being included in the random sample is 10%. This means that for every 10 undergraduates in the population, only one would be included in the sample. It is important to note that this probability assumes a truly random sampling process with no bias or influencing factors affecting the selection of individuals.

In conclusion, the probability of any undergraduate being in a random sample of 2550 undergraduates selected from a population of 25500 is 10%. This information can be useful in determining the representativeness of the sample and making inferences about the larger population based on the characteristics of the sample.

To know more about probability visit:

https://brainly.com/question/30034780

#SPJ11

To calculate the probability of a type II error, we need to first determine the critical value for the test. This can be found using the formula:

Critical value = mean + (z-score for desired level of significance) x (standard deviation/square root of sample size)

Assuming a 5% level of significance and a sample size of 25, the z-score for a one-tailed test is 1.645. Plugging in the values, we get:

Critical value = 100 + (1.645) x (5/sqrt(25)) = 101.645

Next, we need to determine the probability of failing to reject the null hypothesis (i.e. making a type II error) when the true mean heat evolved is actually 103. This can be found using a normal distribution table or calculator:

z-score = (critical value - true mean)/standard deviation = (101.645 - 103)/5 = -0.31

Using the normal distribution table, the probability of a z-score of -0.31 or less is 0.3783. Therefore, the probability of making a type II error is approximately 38%.

In summary, if the true mean heat evolved is 103 and we are using a one-tailed test with a 5% level of significance and a sample size of 25, there is a 38% chance that we will fail to reject the null hypothesis and make a type II error.

learn more about probability here:brainly.com/question/30034780

#SPJ11

A two-way frequency table for the data:

Here's a two-way frequency table for the data:

                | Alarm Clock | No Alarm Clock | Total

Exercise | 48 | 10 | 58

No Exercise | 12 | 30 | 42

Total | 60 | 40 | 100

A two-way frequency table, otherwise referred to as a contingency table, is a chart that showcases the frequencies or reckonings of two categorical variables.

The display has two columns and two or greater rows, with each row manifesting a single grouping of the primary element and each column demonstrating one type of the second constituent.

The cells of this array demonstrate the frequency or amount of appearances that abide by both categories. A two-way frequency table is perennially utilized in data analysis and statistics to investigate the association between two distinct categorical factors.

Read more about surveys here:

https://brainly.com/question/14610641

#SPJ1

If a many-to-many-to-many relationship is created when it is not appropriate to do so, the problem can be corrected by re-designing the database schema to remove the unnecessary relationship.

Here are some steps you can follow to correct the problem:

Analyze the existing database schema to identify the many-to-many-to-many relationship and the tables involved in it.

Evaluate the relationship to determine whether it is necessary or not. If it is not, remove it from the schema.

If the relationship is necessary, analyze the tables and their attributes to identify the primary keys and foreign keys involved in the relationship.

Create a new table to serve as an intermediary between the tables involved in the relationship.

Update the foreign keys in the related tables to point to the primary keys in the new intermediary table.

Migrate the data from the existing tables to the new intermediary table.

Test the new database schema to ensure that it functions correctly and that all data is correctly retrieved and stored.

Overall, the process of correcting a many-to-many-to-many relationship involves re-evaluating the database schema and modifying it as necessary to ensure that it is properly designed to store and retrieve data efficiently and accurately.

for such more question on database schema

https://brainly.com/question/12125305

#SPJ11

An equation that best models the graph shown above is [tex]y = 2(\frac{1}{3} )^x[/tex]

In Mathematics and Geometry, an exponential function can be modeled by using this mathematical equation:

[tex]f(x) = a(b)^x[/tex]

Where:

Based on the graph, we would calculate the value of a and b as follows;

f(x) = a(b)^x

2 = a(b)⁰

a = 2

Next, we would determine value of b as follows;

6 = 2(b)⁻¹

6 = 2/b

b = 2/6

b = 1/3

Therefore, the required exponential function is given by;

[tex]f(x) = y = 2(\frac{1}{3} )^x[/tex]

Read more on exponential equation here: brainly.com/question/28939171

#SPJ1

To solve this problem, we can use a ratio proportion.
Let's assume that the store currently has x part-time workers and y full-time workers.
According to the problem, the ratio of part-time workers to full-time workers is 1:4. Therefore, we can write:
x/y = 1/4
Next, the problem states that if 5 part-time workers were hired, then the ratio would be 3:5. This means that the new ratio of part-time workers to full-time workers would be:
(x+5)/y = 3/5
Now we have two equations with two variables:
x/y = 1/4
(x+5)/y = 3/5
We can solve for x and y by cross-multiplying:
5x = y
15x + 75 = 12y
Substituting 5x for y in the second equation:
15x + 75 = 12(5x)
15x + 75 = 60x
60x - 15x = 75
45x = 75
x = 75/45 = 5/3
Since we can't have a fraction of a worker, we can round up to the nearest whole number.
Therefore, the store has 2 part-time workers and 10 full-time workers.
In summary, using the given ratios and information, we were able to solve for the number of part-time and full-time workers in the store.

To know more about Ratio proportion visit:

https://brainly.com/question/14023900

#SPJ11

Answer:

Let d be the number of dimes and n be the number of nickels.

.10d + .05n = 4.95

n = 15 + d

.10d + .05(15 + d) = 4.95

.10d + .75 + .05d = 4.95

.15d + .75 = 4.95

.15d = 4.20, so d = 28 and n = 43

Delaney has 28 dimes and 43 nickels.

Delaney has 28 dimes and 43 nickels.

To solve the problem, we can use a system of two equations with two variables. Let d be the number of dimes and n be the number of nickels. We can set up the following system of equations:

n = d + 15 (since the number of nickels is fifteen more than the number of dimes)

0.05n + 0.10d = 4.95 (since the total value of the coins is $4.95)

We can substitute the first equation into the second equation to get an equation with only one variable:

0.05(d + 15) + 0.10d = 4.95

Simplifying and solving for d, we get:

0.05d + 0.75 + 0.10d = 4.95

0.15d = 4.20

d = 28

Then we can use the first equation to find n:

n = d + 15 = 28 + 15 = 43

To know more about variables, refer here:

https://brainly.com/question/2466865#

#SPJ11

Answer:255

Step-by-step explanation:

25.5 * 10 = 255 so the answer would be 255

Answer: 255 miles

Step-by-step explanation: 25.5 miles times 10 hours will get you 255 miles away.

Thus, the sample proportions we get would be close to the true proportion of 0.18, with most of the sample proportions falling within a range of 0.151 to 0.209.

The variation of sample proportions from the true proportion can be measured using the standard deviation of the sampling distribution.

In this case, since the population proportion is known (0.18) and the sample size is large (250), we can use the normal approximation to the binomial distribution.

The standard deviation of the sampling distribution of sample proportions is given by the formula sqrt(p*(1-p)/n), where p is the population proportion and n is the sample size. Plugging in the values, we get sqrt(0.18*(1-0.18)/250) = 0.029.

Therefore, we can expect the sample proportions to vary from the true proportion by about 0.029 on average.

In other words, we can be fairly confident that if we take many random samples of 250 high school juniors, the sample proportions we get would be close to the true proportion of 0.18, with most of the sample proportions falling within a range of 0.151 to 0.209.

Know more about the standard deviation

https://brainly.com/question/475676

#SPJ11

The student needs to collect data from at least 665 students to estimate the 99% confidence interval for the proportion of students who bring laptops to campus with a precision of 4 percentage points.

To estimate the 99% confidence interval for the proportion of students who bring laptops to campus, the business student needs to ensure a certain level of confidence and precision in the estimate. Specifically, the student wants a confidence level of 99%, which means that there is a 99% chance that the true population proportion falls within the calculated interval. Additionally, the student wants a precision of 4 percentage points, which means that the sample proportion should be within 4 percentage points of the population proportion.
To determine the minimum sample size required to meet these criteria, the business student can use the following formula:
n = (Z^2 * p * (1 - p)) / E^2
where n is the sample size, Z is the Z-score for the desired confidence level (in this case, Z = 2.576 for a 99% confidence level), p is the estimated population proportion (since no prior estimate is available, the student can use 0.5 as a conservative estimate), and E is the desired margin of error (in this case, 0.04).
Plugging in the values, we get:
n = (2.576^2 * 0.5 * (1 - 0.5)) / 0.04^2
n = 664.76
Rounding up to the nearest whole number, the minimum sample size required by the student is 665. This means that the student needs to collect data from at least 665 students to estimate the 99% confidence interval for the proportion of students who bring laptops to campus with a precision of 4 percentage points.

Learn more about confidence interval here

https://brainly.com/question/20309162

#SPJ11

Roster method for A = {x^2 | x ∈ ℕ},  B = {-π^n | n ∈ ℕ, n ≥ 1} ∪ {0},   C = {6n + 3 | n ∈ ℕ},  D = {4n | n ∈ ℕ, n ≥ 0} . For each set, we can identify a pattern and use the roster method to list additional elements.

Then describe the set using set builder notation.

A = {1, 4, 9, 16, 25, ...}
Pattern: square of consecutive integers
Additional elements: 36, 49, 64, 81
Set builder notation: A = {x^2 | x ∈ ℕ}

B = {..., -π^4, -π^3, -π^2, -π, 0}
Pattern: negative powers of π
Additional elements: -π^5, -π^6, -π^7, -π^8
Set builder notation: B = {-π^n | n ∈ ℕ, n ≥ 1} ∪ {0}

C = {3, 9, 15, 21, 27, ...}
Pattern: multiples of 6 added to 3
Additional elements: 33, 39, 45, 51
Set builder notation: C = {6n + 3 | n ∈ ℕ}

D = {0, 4, 8, ..., 96, 100}
Pattern: multiples of 4
Additional elements: 104, 108, 112, 116
Set builder notation: D = {4n | n ∈ ℕ, n ≥ 0}

Learn more about roster method here:

https://brainly.com/question/28709089

#SPJ11

Answer:

3(7)(x) = 252

21x = 252, so x = 12 feet

S = 2(3(12) + 3(7) + 7(12))

= 2(36 + 21 + 84) = 2(141)

= 282 square feet

Variability between groups is due to the grouping factor.

The F ratio is a measure of the variability between groups relative to the variability within groups, but it is not the cause of the variability between groups.

In an experimental design, researchers often manipulate an independent variable to observe its effects on a dependent variable.

The independent variable is often a grouping factor, which means that participants are assigned to different groups based on some characteristic or condition.

Participants may be assigned to a treatment group or a control group, or they may be grouped based on age, gender, or some other factor.

The experiment is conducted, the dependent variable is measured in each group, and the researcher is interested in whether there are significant differences between the groups.

Variability between groups refers to the differences in the mean scores of the dependent variable between the different groups.

The grouping factor is the reason for the variability between groups.

This is because the different groups are defined by the levels of the grouping factor, and the participants within each group are assumed to be similar with respect to the dependent variable.

Any differences between the groups must be due to the effect of the grouping factor.

The F ratio, which is calculated by dividing the variability between groups by the variability within groups, is used to test whether the differences between the groups are statistically significant.

The F ratio is a measure of the extent to which the grouping factor explains the variability in the dependent variable, and a significant F ratio indicates that there are significant differences between the groups.

Variability between groups is due to the grouping factor, and the F ratio is used to test whether the differences between the groups are statistically significant.

For similar questions on Variability

https://brainly.com/question/12872866

#SPJ11

We estimate that the average number of roommates per semester for all students at the local college is 0.7.

The best point estimate for the average number of roommates per semester for all students at the local college would be the sample mean, which is calculated as the sum of the number of roommates for all students in the sample divided by the number of students in the sample.

Using the information given in the problem, we have:

Sample size (n) = 133

Sample mean ([tex]\bar X[/tex]) = 0.7

Therefore, the best point estimate for the population mean (μ) is the sample mean:

μ ≈ [tex]\bar X[/tex] = 0.7

So, we estimate that the average number of roommates per semester for all students at the local college is 0.7.

for such more question on average

https://brainly.com/question/20118982

#SPJ11