Okay, let's solve this step-by-step:
1) AT = -7.0 K (given)
2) C = 410 J/K (given)
3) Mass of reactant = 0.20 mol (given)
4) To convert temperature change (K) to energy change (J): Energy change = Heat capacity x Temperature change
So in this case: Energy change = 410 J/K x -7.0 K = -2870 J
5) To get enthalpy change per mole (AH), we divide the total energy change by the number of moles of reactant:
-2870 J / 0.20 mol = -14350 J/mol
Therefore, AH = -14350 J/mol.
Let me know if you have any other questions!
To determine the enthalpy change (∆H) for the reactant, first use the relationship q = C × ∆T to calculate the heat exchange in the reaction. Then, convert the resulting value from joules to kilojoules. Finally, divide by the number of moles of the reactant to find ∆H. The enthalpy change for the reaction is -14.35 kj/mol.
Explanation:This chemistry problem involves the use of thermochemical equations and calorimetry principles. Given in the problem, the change in temperature (∆T) is -7.0 K, the heat capacity (C) of the calorimeter and contents is 410 J/K, and a mole of reactant involved is 0.20 mol. Let's use the equation q = C × ∆T to calculate the heat absorbed or released in a reaction where q is the heat gained or lost, C is the calorimeter’s heat capacity, and ∆T is the change in temperature. Hence, the heat exchange (q) = 410 J/K * -7.0 K = -2870 Joules.
This value is negative because it's giving off heat (exothermic). We see that the value obtained is in joules, but we need the output in Kj. 1 Joule is 1x10^-3 Kj, so -2870 Joules is -2.87 Kj. To find ∆H (Enthalpy change), we divide the heat exchanged by the amount of moles. Therefore, ∆H = q/n = -2.87 Kj / 0.20 moles = -14.35 Kj.mol⁻¹. So the enthalpy change for the reaction is -14.35 Kj.mol⁻¹.
Learn more about Calorimetry here:https://brainly.com/question/1407669
#SPJ6
The specific heat capacity of hydrogen is 3.34 cal/g˚C. What is the temperature change when
500 cal of heat is added to 100 g of hydrogen?
A. 0.067˚C
B. 1.49˚C
C. 16.7˚C
D. 49.8˚C
E. 14970˚C
how many photons are emitted from the laser pointer in one second? hint: remember how power is related to energy.
The number of photons emitted from the laser pointer in one second can be calculated using the power of the laser, the energy of the photons, and the relationship between power and energy.
The power of a laser pointer is typically measured in milliwatts (mW). Let's assume the laser pointer has a power output of 5 mW.
The energy of each photon is related to the wavelength of the laser light. Let's assume the laser pointer emits light with a wavelength of 650 nanometers (nm), which corresponds to red light. The energy of each photon can be calculated using the following formula:
E = hc/λ
Where E is the energy of each photon, h is Planck's constant (6.626 x 10⁻³⁴ joule seconds), c is the speed of light (299,792,458 meters per second), and λ is the wavelength of the light in meters.
Plugging in the values for h, c, and λ, we get:
E = (6.626 x 10⁻³⁴ J s)(299,792,458 m/s)/(650 x 10⁻⁹ m) ≈ 3.04 x 10⁻¹⁹ joules
Now, to calculate the number of photons emitted from the laser pointer in one second, we can use the following formula:
Number of photons = Power/ Energy per photon
Plugging in the values for power and energy per photon, we get:
Number of photons = (5 x 10⁻³ W) / (3.04 x 10⁻¹⁹ J) ≈ 1.64 x 10¹⁶photons/second
Therefore, approximately 1.64 x 10¹⁶ photons are emitted from the laser pointer in one second.
To know more about photon emission visit:
https://brainly.com/question/726233
#SPJ11
calculate the number of moles of solute in 83.85 ml of 0.1065 m k2cr2o7(aq).
0.008947 moles of solute.
To calculate the number of moles of solute, we use the formula:
moles = concentration (in mol/L) x volume (in L)
First, we need to convert the given volume of 83.85 ml to liters by dividing it by 1000:
83.85 ml ÷ 1000 ml/L = 0.08385 L
Next, we plug in the given concentration and volume into the formula:
moles = 0.1065 mol/L x 0.08385 L = 0.008947 moles
Therefore, the number of moles of solute in 83.85 ml of 0.1065 M K2Cr2O7 (aq) is 0.008947 moles.
Learn more about moles here :
https://brainly.com/question/31597231
#SPJ11
6.00 moles of an ideal gas is placed in a closed container that has a volume of 0.005 m. If the temperature of the gas is 30.0°C, what is the pressure of the gas? (R-8.31 J/mol-K) 1.51 x 10 O 1.30x10 Pa O 26 x 10'P O 3.02 x 100 PM
The pressure of the gas is 2.56 x 10^5 Pa, which is closest to option (d) 3.02 x 10^4 Pa.
To find the pressure of the gas, we can use the Ideal Gas Law equation: PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.
First, we need to convert the volume from 0.005 m to m^3 by dividing by 1000: 0.005/1000 = 5 x 10^-6 m^3.
Next, we need to convert the temperature from Celsius to Kelvin by adding 273.15: 30.0°C + 273.15 = 303.15 K.
Plugging in the values, we get: P x 5 x 10^-6 m^3 = 6.00 mol x 8.31 J/mol-K x 303.15 K.
Simplifying, we get: P = (6.00 mol x 8.31 J/mol-K x 303.15 K) / (5 x 10^-6 m^3) = 2.56 x 10^5 Pa.
Therefore, the pressure of the gas is 2.56 x 10^5 Pa, which is closest to option (d) 3.02 x 10^4 Pa.
To know more about Ideal gas visit:
https://brainly.com/question/8711877
#SPJ11
Consider the reaction:
Fe2O3(s) + 3H2(g) ⇄ 2Fe(s) + 3H2O(g)
Given: ΔH° = 100 kJ and ΔS° = 138 J/K, at what temperature would the equilibrium constant K = 1?
The equilibrium constant K will be equal to 1 at 724.64 K.
To solve this problem, we can use the equation;
ΔG° = -RTln(K)
where ΔG° is the standard Gibbs free energy change,
R is the gas constant,
T is the temperature in Kelvin, and
K is the equilibrium constant.
We can also use the equations ΔG° = ΔH° - TΔS° and ΔG° = 0 at equilibrium.
Setting these two equations equal to each other and solving for T, we get:
ΔH° - TΔS° = -RTln(K)
100,000 - T(138) = -(8.314)(ln(1))
100,000 - 138T = 0
T = 724.64 K
Therefore, at a temperature of 724.64 K (451.49°C), the equilibrium constant K would equal 1.
Learn more about equilibrium constant here:
https://brainly.com/question/31321186
#SPJ11
In vacuum filtration, how do you break the vacuum seal? What problem can occur if you turn off the aspirator before breaking the vacuum seal? Why would this result be bad?
Answer:the pressure inside the flask will increase rapidly, and this can cause the flask to implode.
Explanation:)
which of the following in aqueous solution is a weak electrolyte? h2co3(aq) nh4cl(aq) lioh(aq) all of the above none of the above
All of the compounds in aqueous solution, namely H₂CO₃(aq), NH₄Cl(aq), and LiOH(aq), act as weak electrolytes.
How are these compounds classified as electrolytes?All of the compounds listed, H₂CO₃ (carbonic acid), NH₄Cl (ammonium chloride), and LiOH (lithium hydroxide), are weak electrolytes when dissolved in water. A weak electrolyte is a substance that only partially dissociates into ions when dissolved in a solvent, resulting in a relatively low conductivity compared to strong electrolytes.
Carbonic acid (H₂CO₃) is a weak acid formed from carbon dioxide. When it is dissolved in water, it undergoes partial ionization, releasing a small amount of H⁺ (hydrogen ion) and HCO₃⁻ (bicarbonate ion). Similarly, ammonium chloride (NH₄Cl) is a salt that dissociates partially into NH₄⁺
(ammonium ion) and Cl⁻ (chloride ion) in water, exhibiting weak electrolyte behavior.
Lithium hydroxide (LiOH) is a strong base; however, in the context of the given options, it is considered a weak electrolyte. It partially ionizes in water, releasing Li⁺ (lithium ion) and OH⁻ (hydroxide ion) ions, but the extent of ionization is limited compared to strong bases.
Therefore, the correct answer is that all of the compounds mentioned—H₂CO₃, NH₄Cl, and LiOH—are weak electrolytes in aqueous solution.
Learn more about electrolytes
brainly.com/question/29039666
#SPJ11
Complete the mechanism for the following enamine reaction by drawing curved arrows, atoms, bonds, charges, and nonbonding electrons where indicated. Add curved arrows for this carbon bond formation.
In the third step, a curved arrow shows the deprotonation of the amine to form an enamine. The nitrogen in the enamine donates a pair of non-bonding electrons to form a new carbon-carbon double bond. Finally, a curved arrow shows the elimination of the protonated amine, resulting in the formation of the final product, an enamine.
Enamine reactions involve the formation of a carbon-carbon double bond through the addition of an amine to a carbonyl compound. The mechanism of this reaction begins with the protonation of the carbonyl oxygen by a strong acid such as HCl. This results in the formation of a carbocation intermediate, which then reacts with the amine to form an iminium ion.
Next, the iminium ion undergoes nucleophilic attack by the enamine, which is formed by the deprotonation of the amine. The nucleophilic attack results in the formation of a new carbon-carbon double bond and the elimination of the protonated amine. The final product is an enamine.
To illustrate the mechanism of this reaction, curved arrows are used to show the movement of electrons. In the first step, a curved arrow shows the protonation of the carbonyl oxygen, which results in the formation of a carbocation intermediate. The positive charge on the carbocation is indicated by a plus sign.
Next, a curved arrow shows the attack of the amine on the carbocation, resulting in the formation of an iminium ion. The nitrogen in the amine donates a pair of non-bonding electrons to form a new carbon-nitrogen bond.
Overall, the mechanism of the enamine reaction involves multiple steps and the use of curved arrows to show the movement of electrons and the formation of new bonds.
to know more about Enamine reactions visit:
brainly.com/question/31550454
#SPJ11
Zinc metal and hydrochloric acid react together according to the following equation: 2HCl(aq) Zn(s) → ZnCl2(aq) H2(g) If 5. 98 g Zn reacts with excess HCl at 298 K and 0. 978 atm, what volume of H2 can be collected? 2. 29 L H2 3. 32 L H2 4. 58 L H2 7. 41 L H2.
We can use the ideal gas law, PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature to find the volume of H2 gas which is 58.2 L.
To calculate the volume of H2 gas produced, we can use the ideal gas law, PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.
First, we need to determine the number of moles of Zn used in the reaction. We can do this by dividing the given mass of Zn by its molar mass. The molar mass of Zn is 65.38 g/mol.
Number of moles of Zn = 5.98 g Zn / 65.38 g/mol = 0.0915 mol Zn
According to the balanced equation, the molar ratio between Zn and H2 is 1:1. Therefore, the number of moles of H2 produced is also 0.0915 mol.
Now, we can calculate the volume of H2 gas using the ideal gas law. We need to convert the given pressure from atm to Pa and the temperature from Kelvin to Celsius.
P = 0.978 atm × 101325 Pa/atm = 99,360.45 Pa
T = 298 K
Plugging in the values: V = (nRT) / P
= (0.0915 mol × 8.314 J/(mol·K) × 298 K) / 99,360.45 Pa
= 0.0582 m³ = 58.2 L
Therefore, the volume of H2 gas collected is 58.2 L, which is approximately equal to 4.58 L
LEARN MORE ABOUT gas law here: brainly.com/question/30458409
#SPJ11
how many of the following molecules are nonpolar? answer as 1, 2, 3 or 4. brf3 cs2 sif4 so3
Out of the given molecules, two of them are nonpolar, CS2 and SO3.
CS2 is nonpolar because it has a linear geometry and its atoms are arranged symmetrically around the central carbon atom, which cancels out the polarity of the two carbon-sulfur bonds. Similarly, SO3 is nonpolar because it has a trigonal planar geometry, with three oxygen atoms arranged symmetrically around the central sulfur atom, which cancels out the polarity of the three sulfur-oxygen bonds.
On the other hand, BrF3 and SiF4 are polar molecules. BrF3 has a trigonal bipyramidal geometry, with three fluorine atoms and two lone pairs of electrons around the central bromine atom. The electronegativity difference between bromine and fluorine creates a polar molecule, with partial positive and negative charges on different ends of the molecule. SiF4 has a tetrahedral geometry, with four fluorine atoms arranged symmetrically around the central silicon atom. However, the electronegativity difference between silicon and fluorine creates a polar molecule, with partial positive and negative charges on different ends of the molecule.
Know more about Trigonal planar geometry here:
https://brainly.com/question/30185738
#SPJ11
Identify the complete redox reaction for a Pb/Pb2+ ||Ag* Ag cell. A. Pb(s) + Ag(s) Pb+ (aq) + Agt (aq) B. Pb(s) + Ag+ (aq) Pb2+ (aq) + Ag(s) c. Pb2+ (aq) + Ag(s) Pb(s) + Ag+ (aq) D. Pb(s) + 2 Ag" (aq) Pb2+ (aq) + 2 Ag(s)
The correct answer for the redox reaction is D. Pb(s) + 2 Ag⁺(aq) → Pb₂⁺(aq) + 2 Ag(s). This is a complete redox reaction for a Pb/Pb₂⁺ || Ag⁺/Ag cell.
The cell consists of two half-cells, an anode (Pb/Pb₂⁺ half-cell) and a cathode (Ag/Ag⁺ half-cell).
In the anode half-cell, lead (Pb) is oxidized to form lead ions (Pb₂⁺) and two electrons (e⁻). The half-cell reaction is represented as Pb(s) → Pb₂⁺(aq) + 2 e⁻.
In the cathode half-cell, silver ions (Ag⁺) are reduced to form silver (Ag) and one electron (e⁻). The half-cell reaction is represented as Ag⁺(aq) + e⁻ → Ag(s).
When the two half-cell reactions are combined, the two electrons from the anode half-cell are transferred to the cathode half-cell, where they are used in the reduction of Ag+ ions. The overall balanced redox reaction for the cell is:
Pb(s) + 2 Ag⁺(aq) → Pb₂⁺(aq) + 2 Ag(s)
This reaction shows that lead is oxidized to form lead ions and silver ions are reduced to form silver. The oxidation and reduction reactions occur simultaneously in the two half-cells and result in the flow of electrons through the external circuit, generating an electric current.
To know more about redox reaction, refer here:
https://brainly.com/question/13293425#
#SPJ11
22.12 Using a Gabriel synthesis, show how you would make each ofthe following compounds: NH2 (b) NH2 (c) NH2 (d) NH2
In the Gabriel synthesis, potassium phthalimide acts as a nitrogen source, while the alkyl halide provides the alkyl group. The reaction results in the formation of an N-alkylphthalimide, which upon hydrolysis with aqueous ammonia yields the corresponding primary amine.
(a) To make NH2 using Gabriel synthesis, we need to react potassium phthalimide with ethyl bromide, followed by the addition of aqueous ammonia. The reaction can be represented as follows:
Phthalimide + Ethyl bromide → N-Ethylphthalimide + KBr
N-Ethylphthalimide + Aqueous ammonia → NH2 + Phthalic acid
(b) To make NH2 using Gabriel synthesis, we need to react potassium phthalimide with benzyl bromide, followed by the addition of aqueous ammonia. The reaction can be represented as follows:
Phthalimide + Benzyl bromide → N-Benzylphthalimide + KBr
N-Benzylphthalimide + Aqueous ammonia → NH2 + Phthalic acid
(c) To make NH2 using Gabriel synthesis, we need to react potassium phthalimide with 1-bromobutane, followed by the addition of aqueous ammonia. The reaction can be represented as follows:
Phthalimide + 1-Bromobutane → N-Butylphthalimide + KBr
N-Butylphthalimide + Aqueous ammonia → NH2 + Phthalic acid
(d) To make NH2 using Gabriel synthesis, we need to react potassium phthalimide with 1-bromo-3-chloropropane, followed by the addition of aqueous ammonia. The reaction can be represented as follows:
Phthalimide + 1-Bromo-3-chloropropane → N-(3-Chloropropyl)phthalimide + KBr
N-(3-Chloropropyl)phthalimide + Aqueous ammonia → NH2 + Phthalic acid
To know more about "Gabriel synthesis" refer here:
https://brainly.com/question/31609914#
#SPJ11
Calculate the molarity of the oxalic acid solution if 25 00 ml of 0. 2500 m naoh is required to trate 20. 00 ml of oxalic acid the reaction h₂c2o4 naoh -->
The molarity of the oxalic acid solution is 0.3125 M.
First, let's write the balanced equation for the reaction:
[tex]H_2C_2O_4 + 2NaOH[/tex] ⇒ [tex]Na_2C_2O_4[/tex] + [tex]2H_2O[/tex]
From the equation, we can see that one mole of oxalic acid ([tex]H_2C_2O_4[/tex]) reacts with two moles of NaOH.
Therefore, the number of moles of NaOH used can be calculated using the formula:
moles of NaOH = molarity of NaOH x volume of NaOH (in liters)
= 0.2500 mol/L x 0.02500 L
= 0.00625 mol
Since the stoichiometry of the reaction is 1:1 between [tex]H_2C_2O_4[/tex] and NaOH, we can conclude that the number of moles of oxalic acid used is also 0.00625 mol.
molarity = moles of solute / volume of solution (in liters)
The volume of the oxalic acid solution is given as 20.00 mL, which is equal to 0.02000 L.
molarity = 0.00625 mol / 0.02000 L
= 0.3125 M
To learn more about molarity follow the link:
https://brainly.com/question/31545539
#SPJ4
this method of determining a partition coefficient is not particularly accurate. what are potential sources of error and how could you confirm the missing mass dissolved in the aqueous layer?
The method of determining a partition coefficient is not particularly accurate due to potential sources of error such as incomplete extraction, inaccurate measurements, and contamination. To confirm the missing mass dissolved in the aqueous layer, you could use analytical techniques like chromatography or spectroscopy.
Some potential sources of error in determining a partition coefficient include incomplete extraction, which occurs when the solute does not completely distribute between the two immiscible phases. Inaccurate measurements of volumes or masses can also lead to errors in the calculated partition coefficient. Additionally, contamination from impurities in the solvents or from the environment may cause inaccuracies in the obtained results.
To confirm the missing mass dissolved in the aqueous layer, you can employ analytical techniques such as chromatography (e.g., high-performance liquid chromatography or gas chromatography) or spectroscopy (e.g., ultraviolet-visible, infrared, or nuclear magnetic resonance spectroscopy). These methods allow you to identify and quantify the dissolved solute in both the organic and aqueous phases, ensuring a more accurate partition coefficient calculation. By comparing the results from these techniques with the initial partition coefficient, you can better understand and address the potential sources of error.
Know more about Chromatography here:
https://brainly.com/question/31857177
#SPJ11
A quantity of a powdered mixture of zinc and iron is added to a solution containing Fe^2+ and Zn^2+ ions, each at unit activity. What reaction will occur?
Standard Reduction Potentials E
Fe^3+(aq) + e- --> Fe^2+(aq) +0.77V
Fe^2+(aq) + 2e- --> Fe(s) -0.44V
Zn^2+(aq) + 2e- --> Zn(s) -0.76V
a)zinc ions will oxidize Fe to Fe^2+
b)Fe^2+ ions will be oxidized to Fe^3+ ions
c)zinc ions will be reduced to zinc metal
d)zinc metal will reduce Fe^2+ ions
The answer is (d) .. I just can't figure out why.
The zinc metal (Zn) is oxidized to Zn²+ ions, while Fe²+ ions are reduced to elemental iron (Fe). This reaction occurs because zinc has a higher tendency to undergo reduction than Fe²+, zinc metal will reduce Fe²+ ions.
The question presents a mixture of powdered zinc and iron added to a solution containing Fe²+ and Zn²+ ions, each at unit activity. The question then asks what reaction will occur.
To determine this, we need to consider the standard reduction potentials (E) provided for each species.
Fe³+(aq) + e- --> Fe²+(aq) +0.77V
Fe²+(aq) + 2e- --> Fe(s) -0.44V
Zn²+(aq) + 2e- --> Zn(s) -0.76V
The reaction that will occur is the one with the highest positive voltage, which indicates a greater tendency towards reduction. Based on the standard reduction potentials, zinc has the highest tendency to undergo reduction, followed by Fe³+ and then Fe²+.
zinc metal will reduce Fe²+ ions. This reaction can be represented as :-Zn(s) + Fe²+(aq) --> Zn²+(aq) + Fe(s)
To know more about Zinc refer here :-
https://brainly.com/question/13890062#
#SPJ11
A k-dimensional hypercube on 2^k vertices is defined recursively: The base case_ a 1- dimensional hypercube, is the line segment graph. Each higher dimensional hypercube is constructed by taking tWo copies of the previous hypercube and using edges to connect the corresponding vertices (these edges are shown in gray): Here are the first three hypercubes: 1D: 2D: 3D= Prove that every k-dimensional hypercube has a Hamiltonian circuit (use induction):
We will prove by induction that every k-dimensional hypercube has a Hamiltonian circuit.
Base case: For k=1, the line segment graph has a Hamiltonian circuit.
Inductive step: Assume that every (k-1)-dimensional hypercube has a Hamiltonian circuit. Consider a k-dimensional hypercube. Divide it into two (k-1)-dimensional hypercubes as shown in the figure. By the inductive hypothesis, each of these has a Hamiltonian circuit. Start at any vertex and traverse the first hypercube's Hamiltonian circuit, then traverse the edge connecting the two hypercubes, and then traverse the second hypercube's Hamiltonian circuit in reverse order. This gives a Hamiltonian circuit for the k-dimensional hypercube, which completes the proof by induction.
To know more about Hamiltonian circuit, here
brainly.com/question/27586562
#SPJ4
According to the information in Table 1., which metal (of those listed as an answer choice) requires the most energy to raise 1.00 g of it by 1.00ºC?
Al- 0.903
Ni- 0.444
Cu- 0.389
Pb- 0.128
Select one or more:
A. Copper
B. Lead
C. Aluminum
D. Nickel Feedback
According to the information in Table 1., Al metal requires the most energy to raise 1.00 g of it by 1.00ºC
The specific heat capacity of a substance represents the amount of energy required to raise the temperature of a given mass of that substance by 1 degree Celsius. In this case, we are comparing the specific heat capacities of aluminum (Al), nickel (Ni), copper (Cu), and lead (Pb) to determine which metal requires the most energy to raise its temperature. Among the given metals, aluminum (Al) has the highest specific heat capacity value of 0.903 J/g·°C. This means that it takes 0.903 Joules of energy to raise the temperature of 1 gram of aluminum by 1 degree Celsius.
On the other hand, nickel (Ni) has a lower specific heat capacity of 0.444 J/g·°C, copper (Cu) has a specific heat capacity of 0.389 J/g·°C, and lead (Pb) has the lowest specific heat capacity of 0.128 J/g·°C. Since aluminum has the highest specific heat capacity value, it requires the most energy to raise the temperature of 1.00 gram of it by 1.00 degree Celsius.
Learn more about specific heat here:
https://brainly.com/question/31608647
#SPJ11
for 5 points, a 0.50 liter solution of 0.10 m hydrofluoric acid [hf] titrated to the half way point with a 0.10 m solution of naoh. determine the ph of the half way point
The pH of the half-way point in the titration of a 0.50 L solution of 0.10 M hydrofluoric acid [HF] with 0.10 M NaOH can be calculated using the Henderson-Hasselbalch equation which is equal to 3.15.
At the half-way point, equal moles of HF and NaOH have reacted, which means that 0.05 moles of HF have reacted with 0.05 moles of NaOH. This leaves 0.05 moles of HF in the solution, which is in equilibrium with its conjugate base, F⁻. The pKa of HF is 3.15, so the Ka can be calculated as 10^(-3.15) = 7.94 × 10^(-4).
The Henderson-Hasselbalch equation is pH = pKa + log([A⁻]/[HA]), where [A⁻] is the concentration of the conjugate base (in this case, F⁻) and [HA] is the concentration of the acid (HF).
At the half-way point, the concentration of HF is 0.05 M and the concentration of F⁻ is also 0.05 M (since they have reacted in a 1:1 ratio). Plugging these values into the equation gives pH = 3.15 + log(0.05/0.05) = 3.15.
To know more about Henderson-Hasselbalch equation, refer here:
https://brainly.com/question/13423434#
#SPJ11
12. what caused the granular polystyrene to form styrofoam when it was placed in boiling water?
When granular polystyrene is placed in boiling water, it begins to soften and melt. As the temperature increases, the polystyrene molecules become more mobile and start to move around. If the melted polystyrene is then rapidly cooled, such as by pouring it into a mold or exposing it to cold air, the polystyrene solidifies in a cellular structure, forming a foam.
When granular polystyrene is heated, it softens and begins to melt. At high temperatures, it can decompose to form a mixture of styrene monomers and other byproducts. However, when the melted polystyrene is cooled rapidly, such as by pouring it into a mold or exposing it to cold air, it can solidify in a cellular structure, forming a foam.
Styrofoam is a brand name for a type of polystyrene foam that is made by suspending tiny beads of polystyrene in a liquid and then subjecting them to steam. The steam causes the beads to expand and fuse together, forming a foam with a low density and excellent thermal insulation properties.
In summary, the formation of Styrofoam from granular polystyrene when it is placed in boiling water is due to the melting of polystyrene followed by its rapid cooling, which results in the formation of a foam with a cellular structure.
For more question on polystyrene click on
https://brainly.com/question/30050448
#SPJ11
Calculate the ?G°rxn using the following information:
4HNO3 (g) + 5N2H4 (l) --> 7N2(g) + 12H2O (l)
?H= -133.9 50.6 -285.8
?S= 266.9 121.2 191.6 70.0
?H is in kJ/mol and ?S is in J/mol
the answer needs to be in kJ
I got -3298.2648 but that is wrong. Could someone please explain how to do this well please?
(The question marks are all delta's. They didn't show anymore when I submitted the question)
The [tex]G^\circ_{\text{rxn}}[/tex] for the given reaction is -560.1 kJ/mol. The calculation involves converting H and S to kJ/mol and using the equation [tex]G^\circ_{\text{rxn}}[/tex] = [tex]H^\circ_{\text{rxn}} - T \cdot S^\circ_{\text{rxn}}[/tex] where T is the temperature in Kelvin.
To calculate the standard Gibbs free energy change ([tex]G_{\text{rxn}}[/tex]) for the given reaction, use the equation:
[tex]G_{\text{rxn}} = H_{\text{rxn}} - T \cdot S_{\text{rxn}}[/tex]
where [tex]H^\circ_{\text{rxn}}[/tex] and [tex]S^\circ_{\text{rxn}}[/tex] are the standard enthalpy and entropy changes, respectively, and T is the temperature in Kelvin.
First, convert the given enthalpy and entropy changes to units of kJ/mol:
[tex]H_{\text{rxn}} = -133.9 \, \text{kJ/mol} + 50.6 \, \text{kJ/mol} - 285.8 \, \text{kJ/mol} = -369.1 \, \text{kJ/mol}[/tex]
[tex]S_{\text{rxn}} = 266.9 \, \text{J/mol} \cdot \text{K} + 121.2 \, \text{J/mol} \cdot \text{K} + 191.6 \, \text{J/mol} \cdot \text{K} + 70.0 \, \text{J/mol} \cdot \text{K} = 649.7 \, \text{J/mol} \cdot \text{K} = 0.6497 \, \text{kJ/mol} \cdot \text{K}[/tex]
Next, determine the temperature of the reaction. If the temperature is not given, assume it is at standard conditions of 298 K.
Using the given values, we get:
[tex]\Delta G_{\text{rxn}} = (-369.1 \, \text{kJ/mol}) - (298 \, \text{K})(0.6497 \, \text{kJ/mol} \cdot \text{K}) = -560.1 \, \text{kJ/mol}[/tex]
Therefore, the standard Gibbs free energy change for the reaction is -560.1 kJ/mol.
To know more about the Gibbs free energy refer here :
https://brainly.com/question/13798790#
#SPJ11
which form of energy fuels cellular metabolism in chemoheterotrophs
In chemoheterotrophs, cellular metabolism is primarily fueled by chemical energy in the form of organic compounds obtained from external sources.
These organisms rely on the intake of complex organic molecules, such as carbohydrates, proteins, and lipids, from their environment as sources of energy. Once these organic compounds are ingested, they undergo various metabolic processes to break them down into smaller molecules. The energy stored in the chemical bonds of these molecules is then extracted through a series of enzymatic reactions in a process called cellular respiration. During cellular respiration, the organic molecules are oxidized, releasing electrons that are passed through a series of electron carriers in the electron transport chain. This process generates adenosine triphosphate (ATP), the primary energy currency of cells. ATP provides the necessary energy for cellular activities, such as biosynthesis, active transport, and movement.
The breakdown of organic compounds and the subsequent production of ATP occur through different metabolic pathways, including glycolysis, the citric acid cycle, and oxidative phosphorylation. Overall, chemoheterotrophs obtain energy for cellular metabolism by oxidizing organic compounds, generating ATP through cellular respiration. This allows them to meet their energy needs for growth, maintenance, and reproduction.
Learn more about cellular respiration here:
https://brainly.com/question/29760658
#SPJ11
The gas phase decomposition of dimethyl ether at 500 °C CH3OCH3(g) CH4(g) + H2(g) + CO(g) is first order in CH3OCH3 with a rate constant of 4.00×10-4 s-1. If the initial concentration of CH3OCH3 is 3.48×10-2 M, the concentration of CH3OCH3 will be M after 5158 s have passed.
The concentration of CH₃OCH₃ after 5158 seconds will be approximately 4.44×10⁻³ M.
To solve this problem, we can use the first-order rate equation:
ln([A]ₜ/[A]₀) = -kₜ₋₁t
Where:
[A]ₜ is the concentration of reactant A at time t,
[A]₀ is the initial concentration of reactant A,
kₜ₋₁ is the rate constant,
t is the time.
We need to find [A]ₜ (the concentration of CH₃OCH₃ after 5158 s).
Using the equation above, we rearrange it to solve for [A]ₜ:
[A]ₜ = [A]₀ * e^(-kₜ₋₁t)
Substituting the given values:
[A]ₜ = (3.48×10⁻² M) * e^(-4.00×10⁻⁴ s⁻¹ * 5158 s)
Calculating this expression:
[A]ₜ = (3.48×10⁻² M) * e^(-2.0632)
[A]ₜ ≈ (3.48×10⁻² M) * 0.1275
[A]ₜ ≈ 4.44×10⁻³ M
Learn more about The Concentration in the link: https://brainly.com/question/3045247
#SPJ11
a sample currently contains 20 parent atoms and 60 daughter atoms. given that the half-life is 2,000 years how old is the sample?
A sample currently contains 20 parent atoms and 60 daughter atoms. so the sample is approximately 4,706 years old.
To determine the age of the sample, we need to use the formula for radioactive decay:
N = N0(1/2)^(t/T)
where N is the current number of parent atoms, N0 is the initial number of parent atoms, t is the time elapsed, T is the half-life of the sample.
We are given that N0 = 20 and N/N0 = 60/20 = 3. Thus, we can solve for t:
3 = (1/2)^(t/2000)
Taking the natural log of both sides:
ln(3) = (t/2000) ln(1/2)
Solving for t:
t = 2000 ln(3)/ln(1/2)
t ≈ 4,706 years
Therefore, the sample is approximately 4,706 years old.
we can determine the age of the sample using the half-life of 2,000 years and the ratio of parent to daughter atoms.
The sample contains 20 parent atoms and 60 daughter atoms, making a total of 80 atoms. The ratio of parent to daughter atoms is 1:3. Since the half-life is 2,000 years, we can calculate the number of half-lives that have passed to reach this ratio.
Initially, there would have been 80 parent atoms and 0 daughter atoms. After the first half-life (2,000 years), there would be 40 parent atoms and 40 daughter atoms. After the second half-life (another 2,000 years), there would be 20 parent atoms and 60 daughter atoms, which matches the given information.
So, two half-lives have passed to reach the current state of the sample. Each half-life is 2,000 years long, so the age of the sample can be calculated as follows
Age of the sample = (Number of half-lives) * (Half-life)
Age of the sample = 2 * 2,000 years
Age of the sample = 4,000 years
Therefore, the sample is approximately 4,000 years old.
learn more about atoms
https://brainly.com/question/1566330
#SPJ11
Identify each substance as an acid or a base. Liquid drain cleaner, pH 13. 5 milk, pH 6. 6.
liquid drain cleaner is an alkaline base with a pH of 13.5, while milk is slightly acidic with a pH of 6.6.
Liquid drain cleaner with a pH of 13.5 is classified as a base. Substances with a pH above 7 are considered basic or alkaline, and a pH of 13.5 indicates a highly alkaline solution.
Milk, on the other hand, with a pH of 6.6, is slightly acidic. pH values below 7 are indicative of acidic substances. While milk is generally considered slightly acidic, its acidity is relatively mild and not noticeable to taste.
In summary, liquid drain cleaner is an alkaline base with a pH of 13.5, while milk is slightly acidic with a pH of 6.6.
To know more about Acid-Base related question visit:
https://brainly.com/question/23687757
#SPJ11
true/false. acts as a template are separated by the breaking of hydrogen bonds between nitrogen bases destroys the entire genetic code attracts a nitrogen base
When 35 mL of 0.92 M sulfuric acid reacts with excess Al, how many L of hydrogen gas is formed at 23 °C and a pressure of 745 mm Hg?
2Al + 3H2SO4 ----> Al2(SO4)3 + 3H2
When 35 mL of 0.92 M sulfuric acid reacts with excess aluminum, approximately 0.823 L of hydrogen gas is formed at 23 °C and a pressure of 745 mm Hg.
To determine the volume of hydrogen gas formed, we need to use the ideal gas law equation:
PV = nRT
Where:
P = pressure of the gas (in atm)
V = volume of the gas (in liters)
n = number of moles of gas
R = ideal gas constant (0.0821 L·atm/(mol·K))
T = temperature (in Kelvin)
Convert the given pressure to atm:
745 mm Hg * (1 atm / 760 mm Hg) = 0.9797 atm
Convert the given volume to liters:
35 mL * (1 L / 1000 mL) = 0.035 L
Calculate the number of moles of hydrogen gas produced.
From the balanced equation:
2 Al + 3 H₂SO₄ → Al₂(SO₄)₃ + 3 H₂
We can see that 3 moles of hydrogen gas are produced for every 3 moles of H₂SO₄.
Given that the concentration of sulfuric acid is 0.92 M and the volume used is 35 mL, we can calculate the number of moles of H₂SO₄ used:
moles of H₂SO₄ = concentration * volume
moles of H₂SO₄ = 0.92 M * 0.035 L = 0.0322 moles
Therefore, the number of moles of hydrogen gas produced is also 0.0322 moles.
Then convert the temperature to Kelvin:
23 °C + 273.15 = 296.15 K
Plug the values into the ideal gas law equation to find the volume of hydrogen gas:
PV = nRT
(0.9797 atm) * V = (0.0322 mol) * (0.0821 L·atm/(mol·K)) * (296.15 K)
Solving for V:
V = (0.0322 mol) * (0.0821 L·atm/(mol·K)) * (296.15 K) / (0.9797 atm)
V ≈ 0.823 L
Learn more about ideal gas law: https://brainly.com/question/12624936
#SPJ11
write the net cell equation for the electrochemical cell. phases are optional. do not include the concentrations. sn(s)||sn2 (aq,0.0155 m)‖‖ag (aq,1.50 m)||ag(s)
Sn(s) + 2Ag+(aq) → Sn2+(aq) + 2Ag(s) (net cell equation)
How can the net cell equation be written for the given electrochemical cell?Net cell equation: Sn(s) + 2Ag+(aq) → Sn2+(aq) + 2Ag(s)
In the given electrochemical cell, the net cell equation represents the overall reaction that occurs at the electrodes. The cell consists of two half-cells separated by a double vertical line, indicating a salt bridge. The left half-cell has a tin electrode (Sn(s)) immersed in a solution containing tin(II) ions (Sn2+(aq)). The right half-cell has a silver electrode (Ag(s)) immersed in a solution containing silver ions (Ag+(aq)).
The net cell equation shows the transformation of reactants into products. In this case, the solid tin electrode (Sn(s)) loses two electrons to become tin(II) ions (Sn2+(aq)), while the silver ions (Ag+(aq)) from the solution gain two electrons to form solid silver (Ag(s)). The stoichiometric coefficients in the equation represent the number of electrons transferred in the redox reaction.
It's important to note that the concentrations are not included in the net cell equation, as the equation solely focuses on the electron transfer process occurring at the electrodes. The concentrations of the species involved in the solution may affect the cell potential, but they are not directly represented in the net cell equation.
Understanding the net cell equation helps in analyzing and predicting the behavior of electrochemical cells, including their voltage, direction of electron flow, and the oxidizing and reducing agents involved.
Learn more about electrochemical cells
brainly.com/question/31604301
#SPJ11
The rate constant for the second order reaction: 2NO2------> 2NO + O2 is 0.54m^-1s^-1 at 300 degrees C. How long in seconds would it take for the concentration of NO2 to decrease from 0.62 M to 0.28 M ?
It would take approximately 2.29 seconds for the concentration of NO2 to decrease from 0.62 M to 0.28 M at 300 degrees Celsius.
To calculate the time it takes for the concentration of NO2 to decrease from 0.62 M to 0.28 M for a second order reaction, you can use the integrated rate law formula:
1/[NO2]t - 1/[NO2]0 = kt
where [NO2]t is the final concentration (0.28 M), [NO2]0 is the initial concentration (0.62 M), k is the rate constant (0.54 m^-1s^-1), and t is the time in seconds.
1/0.28 - 1/0.62 = (0.54 m^-1s^-1) * t
Now solve for t:
t = (1/0.28 - 1/0.62) / (0.54 m^-1s^-1)
t ≈ 2.29 s
So, it would take approximately 2.29 seconds for the concentration of NO2 to decrease from 0.62 M to 0.28 M at 300 degrees Celsius.
To learn more about constant, refer below:
https://brainly.com/question/31730278
#SPJ11
When a solution containing M(NO3)2 of an unknown metal M is electrolyzed, it takes 74.1 s for a current of 2.00 A to to plate out 0.0737 g of the metal. The metal isA. Rh
B. Cu
C. cd
D.TI
E. MO
The metal M in the solution is titanium (Ti), as determined by using Faraday's law of electrolysis and calculating the molar mass based on the amount of substance deposited during the electrolysis. Here option D is the correct answer.
The electrolysis process involves the use of electric current to drive a non-spontaneous chemical reaction. In this case, the unknown metal M is being plated out of the solution containing M(NO3)2.
To determine the identity of the metal, we can use Faraday's law of electrolysis, which relates the amount of substance deposited on an electrode to the quantity of electric charge passed through the electrolyte.
The formula for Faraday's law is:
Q = nF
where Q is the quantity of electric charge (in coulombs), n is the number of moles of a substance deposited on the electrode, and F is Faraday's constant (96,485 C/mol).
We can use this formula to determine the number of moles of metal deposited during the electrolysis:
n = Q/F
To calculate Q, we can use the formula:
Q = It
where I is the current (in amperes) and t is the time (in seconds).
Substituting the given values, we get:
Q = 2.00 A x 74.1 s = 148.2 C
Substituting into the formula for n, we get:
n = 148.2 C / 96485 C/mol = 0.001536 mol
The molar mass of the metal can be calculated using the mass of metal deposited:
m = nM
where m is the mass of metal (in grams) and M is the molar mass of the metal (in g/mol).
Substituting the given values, we get:
0.0737 g = 0.001536 mol x M
M = 48.0 g/mol
Comparing this molar mass to the molar masses of the possible metals (Rh = 102.9 g/mol, Cu = 63.5 g/mol, Cd = 112.4 g/mol, Ti = 47.9 g/mol, Mo = 95.9 g/mol), we can see that the metal is titanium (Ti).
To learn more about Faraday's law
https://brainly.com/question/13369951
#SPJ4
a solution containing 15.0ml of 4.00mhno3 is diluted to a volume of 1.00l. what is the ph of the solution? round your answer to two decimal places.
The pH of the solution is approximately 1.22 when rounded to two decimal places.
To find the pH of the solution, we need to use the concentration of the HNO3 and the volume of the solution. First, we need to calculate the new concentration of the solution after it has been diluted. We can use the equation: C1V1 = C2V2
Where C1 is the initial concentration, V1 is the initial volume, C2 is the final concentration, and V2 is the final volume.
To calculate the pH of the diluted solution, first determine the moles of HNO3 present, then calculate the concentration of HNO3 in the diluted solution, and finally use the pH formula.
1. Moles of HNO3 = (Volume × Concentration)
Moles of HNO3 = (15.0 mL × 4.00 M HNO3) × (1 L / 1000 mL) = 0.060 moles HNO3
2. Concentration of HNO3 in the diluted solution:
New concentration = Moles of HNO3 / New volume
New concentration = 0.060 moles / 1.00 L = 0.060 M
3. Calculate pH using the formula: pH = -log[H+]
Since HNO3 is a strong acid, it dissociates completely in water, so [H+] = [HNO3]. Therefore:
pH = -log(0.060)
To know more about solution visit :-
https://brainly.com/question/30665317
#SPJ11