3. Gather data: Use the values above to fill in the first row of the table. Then run your own experiments to fill
in the last two rows.
f
d.
d,
h.
h,
ร”
S
d
de
2.0
h;
h.
2.0
s.
2.0
S
f
2.0
15
10
30

Taking into account the definition of kinetic energy, the kinetic energy of a 23.2 g object moving at a speed of 81.9 km/hr is 6.004 J.

Kinetic energy is a form of energy. It is defined as the energy associated with bodies that are in motion and this energy depends on the mass and speed of the body.

This is, kinetic energy is defined as the amount of work necessary to accelerate a body of a certain mass and in a position of rest, until it reaches a certain speed. Once this point is reached, the amount of accumulated kinetic energy will remain the same unless there is a change in speed or the body returns to its state of rest by applying a force.

Kinetic energy is represented by the following formula:

Ec = ½ mv²

Where:

In this case, you know:

Replacing in the definition of kinetic energy:

Ec = ½ 0.0232 g×(22.75 m/s)²

Solving:

Ec= 6.004 J

Finally, the kinetic energy of a 23.2 g object moving at a speed of 81.9 km/hr is 6.004 J.

Leant more about kinetic energy:

https://brainly.com/question/25959744

If the lens in a person's eye is too highly curved, this person is suffering from: nearsightedness.

lens is a piece of transparent material (such as glass) that has two opposite regular surfaces either both curved or one curved and the other plane and that is used either singly or combined in an optical instrument for forming an image by focusing rays of light.

The lens is used to form an image of an object by focusing rays of light from the object.

Various types of lenses are :

learn more about  lens here

https://brainly.com/question/9757866

#SPJ4

The equivalent focal length of this combination-lenses should be +50 cm.

Given:

Focal length of convex lens, f₁ = +25 cm

Focal length of concave lens, f₂ = -50 cm

Calculation:

We know that the power of a lens is given as:

P = 1 / f

where, f is the focal length of lens

Now, the power of convex lens can be calculated as:

P₁ = 1/f₁

  = 1/(25×10⁻² m)

  = 100/25

  = +4 D

Similarly, the power of concave lens can be calculated as:

P₂ = 1/f₂

    = (1/-50×10⁻² m)

    = -100/50

    = -2 D

Thus, the power of the combined lenses can be calculated as:

P₍₁₊₂₎ = P₁ + P₂

       = +4 D - 2 D

       = +2 D

Now, the combined focal length of the lens can be calculated as:

f₍₁₊₂₎ = 1 / P₍₁₊₂₎

      = 100 / 2 D

      = +50 cm

Therefore, the equivalent focal length of this combination-lenses will be +50 cm.

Learn more about mirrors and lenses here:

https://brainly.com/question/3209252

#SPJ4

Given,

L=100 cm=0.1 m

D=90 cm

B=1 T

I=76 A

B*L=μnI

1 *0.1= 4π*[tex]10^{-7}[/tex]*n*76

n= 1047

So the turns of solenoid needed is 1047.

A solenoid with infinite length but finite diameter is said to be infinite. In this abstraction, the solenoid is frequently seen as a cylindrical sheet of conductive material. The term "continuous" refers to the fact that the solenoid is not made up of discrete coils with finite widths but rather numerous infinitely thin coils joined together without any gaps. An indefinitely long solenoid has a homogenous magnetic field inside of it that is independent of the cross-sectional area or the distance from the axis. This is a long enough derivation of the magnetic flux density surrounding a solenoid that fringe effects may be disregarded.

In an MRI, the magnetic field B is generated by a solenoid of length 100 cm and diameter of 90 cm. The B field generated is one (1) T. The largest current the wire can carry is 76 A. 1047 turns of solenoid is needed.

Learn more about solenoid here:

https://brainly.com/question/15504705

#SPJ4

14mg = 14 × 10^-3 g

= 14 × 10^-3 / 10^3 kg

= 14 × 10^-6 kg

= 0.014 kg

☆...hope this helps...☆

_♡_mashi_♡_

Answer:

0.000014 kg

Explanation:

Velocity of Deidre and her dog is 2.11m/s.

=2.11m/s

Thus , we can conclude that the velocity of Deidre and her dog is 2.11 m/s towards north .

Learn more about velocity here :

brainly.com/question/80295?source=archive

#SPJ1

The minimum initial velocity of the rock is V = 8.56 m/sec.

According to the rule of conservation of energy, energy can only be transformed from one form of energy to another and cannot be created or destroyed. This indicates that unless energy is added from the outside, a system always has the same quantity of energy.

Calculate the rock's minimal initial velocity in meters/second as it exits the slingshot at a distance of 6 feet [tex]$\left(h_{2}=6\right.ft.)[/tex] above the ground.

Using the provided information, the net height of the limb is calculated as shown below.

[tex]$$h &=h_{1}-h_{2}$$[/tex]

h = 18.3 - 6

h = 12.3

Now, using the conservation of energy the minimum initial velocity of the rock is computed as shown below,

Kinetic energy of the rock = Potential energy the rock

[tex]$$\begin{aligned}\frac{1}{2} m V^{2} &=m g h \\\frac{1}{2} V^{2} &=g h \\\frac{1}{2} V^{2} &=\left(32.1 \mathrm{ft} / \mathrm{s}^{2}\right)(12.3 \text { feet }) \\V &=\sqrt{2\left(32.1 \mathrm{ft} / \mathrm{s}^{2}\right)(12.3 \mathrm{feet})}\end{aligned}$$[/tex]

V = 28.10 [tex]\frac{ft}{s}[/tex].

The minimal initial velocity in meter/second is 8.56.

Therefore, the minimum initial velocity of the rock is 8.56 m/sec

To know more about conservation of energy visit:
https://brainly.com/question/18924822

#SPJ4

CAT IV is the lowest acceptable overvoltage category rating for an ammeter.

According to IEC 1010 and UL61010-1 standards, the overvoltage installation categories for low voltage systems of less than 1000 Volts test equipment are described by the CAT III & IV ratings. This describes a component's capacity to withstand transient or impulsive voltage. Our voltage indicators meet the necessary standards to be utilized as permanently mounted test equipment for fixed installations such switchgear, MCCs, bus and feeder in industrial plants, and low voltage connections to utility power.

A component can be positioned or utilized further downstream from the voltage source the lower the number, which also indicates how much less impulse it can withstand. Installation at the origin or at the utility level falls under CAT IV, the highest classification. Our products have a 600V at CAT IV. 

Learn more about ammeter here:

https://brainly.com/question/13162074

#SPJ4

Write an expression for the x-component of acceleration of the given velocity field as a function of x, y, z, and/or t.

v={4yti-2xtj}m-s

We frequently wish to know an object's acceleration vector at any point along its trajectory in addition to its displacement and velocity vectors. This acceleration vector, which represents the instantaneous acceleration, may be found by taking the velocity function's derivative with respect to time, as we saw in the previous chapter. The fact that these are now vector quantities is the only variation in two or three dimensions. The same approach that was demonstrated in the previous chapter for one-dimensional motion can be used to tackle multidimensional motion with constant acceleration. As we previously demonstrated, motion in three dimensions is comparable to motion in three one-dimensional space along axes that are all perpendicular to one another.

To learn more about acceleration vector from the given link:

https://brainly.com/question/12645595

#SPJ4

Force constant = k = 6811 N/m

Given:

mass = m = 69.5 kg

L(initial) = ideal spring length = 12 cm= 0.120 m

L(final) = final spring length = 13 cm= 0.130 m

Two forces acting on the object is k*x and mg

so,

kx-mg=0

kx = mg

k = mg/x

We know that x= displacement = L(final)- L(initial)

0.130-0.120=0.10

k= 69.5×9.8/0.10

k =6811 N/m

To learn more about force constant of spring visit:

https://brainly.com/question/20785296

#SPJ4

If the efficiency of technology was to be improved in other to reduce electrical power consumption, the sectors which would be chosen is referred to as residential and commercial.

This is defined as the application of science to the practical aims and activities of human life. Power on the hand is defined as the amount of energy which is transferred per unit time and the S.I unit is referred to as Watts.

It can be inferred that electric power consumption is most abundant in residential and commercial sectors due to the number of appliances and hours which are present and used in this area.

It is therefore appropriate to focus on these two sectors so as to achieve the aim of an efficient technology in reduction of electrical power consumption.

Read more about Electric power here https://brainly.com/question/1125269

#SPJ1

Answer: you are the person in charge of building a nuclear power plant in Florida. your first choice is to select a site for building the power plant.

Explanation: To find the answer, we need to know more about the nuclear power plants and the criteria to select the site for power plant.

Thus, we can conclude that, before building a nuclear power plant, our first choice should be to select a site.

Learn more about the nuclear power plants and the criteria to select the site for power plant here:

https://brainly.com/question/28045272

#SPJ4

In a dry pipe sprinkler system, pressurized air or nitrogen, rather than water, is used to fill the pipes. This air maintains the closed position of a remote valve, also referred to as a dry pipe valve.

The dry-pipe valve, which is situated in a hot area, keeps water from flowing into the pipe until a fire triggers the operation of one or more sprayer. When this occurs, the dry pipe valve releases and the air leaves. After that, water enters the pipe and pours onto the flames through open sprinklers.

Learn more about the Fire suppression system: https://brainly.com/question/14727381

#SPJ1

The duty of the AHJ is to: (C). review installation designs and determine if they fall under Code jurisdiction

AHJ can be defined as that means Authority Having Jurisdiction

AHJ can be defined as an organization, office, or individual that are responsible for the issuance of permits, enforcing the requirements of a code or standard and  approving materials or a procedure.

In conclusion, The role of the AHJ are outlined in the paragraph above.

Learn more about Jurisdiction: https://brainly.com/question/10377896

#SPJ1

The index of refraction of the medium where the speed of light is 1.24× 10⁸m/s, is 2.42.

To find the answer, we need to know about the relation between the refractive index and velocity of light.

Refractive index of the medium =

3×10⁸/1.24 x 10⁸

= 2.42

Thus, we can conclude that the refractive index of the medium is 2.42.

Learn more about the refractive index here:

brainly.com/question/83184

#SPJ1

The magnitude of the resultant force acting on the driver, who weighs 0.80 kN

The total amount of force acting on the object or body along with the direction of the body.

The formula for the resultant force vector is given by Newton's Second law.  F=ma.

here

speed, v = 25 m/s

radius, r = 0.15 km = 150 m

weight, w = 0.80 kN = 800 N

we know that,

W = m*g

800 = m * 9.8

m = 800 / 9.8

m = 81.63 kg

magnitude of the resultant force:

F = m*v^2 / r

F = 81.63 * 25^2 / 150

F = 340.13 N

F = 0.34 kN

hence,

The magnitude of the resultant force acting on the driver, who weighs 0.80 kN

Learn more about resultant force here:

https://brainly.com/question/13649876

#SPJ4

The limiting reagent in this procedure is the substance that is completely used in the reaction. The substance which is not completely used is called excess.

The beginning cloth in a chemical reaction is known as the reactant. each chemical response could have one or more reactants.

In a chemical response limiting reagent is the reactant this is fed on first and prevents any similar reaction from happening. the quantity of product shaped during the response is decided by means of the limiting reagent. as an example, allow us to recall the response of solution and chlorine

Materials used during the manufacture of the lively substance (e.g., tradition media, growth factors, and so on) and that are not meant to form a part of the active substance shall be taken into consideration as raw substances. cloth forming a critical part of the lively materials element shall be considered as the beginning substance.

Learn more about limiting reagents here:-https://brainly.com/question/26905271

#SPJ4

The focal plane  is a plane perpendicular to the optic axis through the focal point.

What is  focal plane?

What is focal plane and lens?

Learn more about focal plane

brainly.com/question/3081731

#SPJ4

The decreasing order of the momenta are b>a=d=e>c.

Solution: The momentum of all the options are mentioned below according to the formula:

a. p = 20 × 1 = 20gm/s

b. p = 20 × 2 = 40gm/s

c. p =10 × 1 = 10gm/s

d. p = 10 × 2 = 20 gm/s

e. p =200 × 0.1 = 20gm/s

Know more about momentum https://brainly.com/question/904448

#SPJ4

Question:

I hope you are trying to ask the question below:

Rank in order, from largest to smallest, the momenta a to e of the objects

a. 20 g & 1 m/s

b. 20 g & 2 m/s

c. 10 g & 1 m/s

d. 10 g & 2 m/s

e. 200 g & 0.1 m/s

Two worlds in the outer solar system that seem remarkably similar to each other are: Triton and Pluto

The outer solar system comprises the next four planets and everything beyond the planet Neptune but within the gravitational pull of the Sun. The Kuiper Belt and the Oort Cloud are also parts of the outer region.

Triton is only slightly larger than Pluto. Both worlds have similar surface materials, such as nitrogen, methane and carbon monoxide. Their diameters, masses and densities are also similar. Both Triton and Pluto may also have originated within the Kuiper Belt. Triton is thought to be originally a Kuiper Belt Object that was captured by Neptune's gravity.

Because Triton and Charon-Pluto are both from the Kuiper belt they are both made of similar materials such as nitrogen, methane, carbon dioxide and water ice. Both  have large cores that are made primarily of rock with mantles of water ice and crusts made of frozen nitrogen. Neither of them have a magnetic field.

To learn more about  Kuiper Belt   here

https://brainly.com/question/25583240?referrer=searchResults

#SPJ4

Answer:

W1 L1 = W2 L2        equation for balancing torques

M1 g L1 = M2 L2 g

Or M2 = M1 * 1.75 / 1.22 = 1.43 M1 = 32.1 kg

First electric circuit means, the circuit has elements like resistors, capacitors, and inductors along with sources. Any electric circuit comprises nodes, branches, and meshes.

The joining point of two elements is called a node. The element between two nodes is called a branch. In branch, only one series element is possible to connect but in parallel, it can have N number of elements. No branch without elements in electric circuits.

A resistor is an electrical aspect that limits or regulates the go with the flow of electrical modern-day in a digital circuit. Resistors can also be used to offer a selected voltage for an energetic device together with a transistor.

The resistor is described as. A passive electrical issue with two terminals that can be used for both limiting or regulating the glide of electric contemporary in electric circuits. the main cause of the resistor is to lessen the modern-day go with the flow and to lower the voltage in any unique part of the circuit.

A resistor works by using proscribing the float of current, it may try this in one in all 3 approaches: first off, by using a much less conductive cloth, secondly by making the conductive fabric thinner, and sooner or later by making the conductive fabric longer.

Learn more about resistors here: https://brainly.com/question/14883923

#SPJ4

If l and m both are doubled then the period becomes √2*T

what is a simple pendulum?

It is the one which can be considered to be a point mass suspended from a string or rod of negligible mass.

A pendulum is a weight suspended from a pivot so that it can swing freely.

Here,

A certain frictionless simple pendulum having a length l and mass m

mass of pendulum = m

length of the pendulum = l

The period of simple pendulum is:

[tex]T = 2\pi \sqrt{\frac{l}{g} }[/tex]

Where k is the constant.

Now the length and mass are doubled,

m' = 2m

l' = 2l

[tex]T' = 2\pi \sqrt{\frac{2l}{g} }[/tex]

[tex]T' = \sqrt{2}* 2\pi \sqrt{\frac{l}{g} }[/tex]

[tex]T' = \sqrt{2} * T[/tex]

Hence,

If l and m both are doubled then the period becomes √2*T

Learn more about Simple Harmonic Motion here:

https://brainly.com/question/17315536

#SPJ4

for what we can get from our side then we will see if they are being made in a letter or something which is leading enormous growth in cities with brick and its own way that it will not on the market and its not a good life for us to stay in and

Work done will be 825 N*m

Given:

mass of crate = 44.0 kg

horizontal force = 150 N

distance moved by crate = 5.50 m

To Find:

Work done

Solution: Work is done whenever a force moves something over a distance. You can calculate the energy transferred, or work done, by multiplying the force by the distance moved in the direction of the force.

First we want to find the work, it is given by the force applied times the distance moved, so the work is just:

W = Force x displacement

W = 150N*5.50m

W = 825 N*m

So, work done will be 825 N*m

Learn more about Work done here:

https://brainly.com/question/18762601

#SPJ4

The element of a valid contract which is established by getting the signatures of all parties is mutual agreement

An element of a valid contract simply refers to that promise made between two or more parties that which allow the courts to make judgement.

Some elements of valid contract are:

So therefore, the element of a valid contract which is established by getting the signatures of all parties is mutual agreement

Learn more about elements of a valid contract:

https://brainly.com/question/15101023

#SPJ1

The  4 criteria you would use to compare energy sources are;

1. It is necessary to assess whether or not they are renewable.

2. It is necessary to be aware of the amount of energy that is provided per energy source unit.

3. You have to be aware of how risky it is to utilize different types of energy sources.

4. It is necessary to be aware of the effects that various types of energy sources have on the surrounding environment.

This is further explained below.

Generally,  A source from which energy that may be used can be collected or recovered, either directly or by means of a process of conversion or transformation

In conclusion, 1. You must decide if they are renewable or not.

2. You must be aware of the amount of energy provided per unit of energy source.

3. You must be aware of the safety of using various energy sources.

4. Need to understand how various energy sources affect the environment.

Read more about energy sources.

https://brainly.com/question/10841575

#SPJ1

Astronomers thought that a nova was a new star, appearing for the first time in the heavens, today we know that it is as a binary star system.

A binary star system is known to be one where one star is known to be called a white dwarf and there is a mass that is said to be transferred to it

A binary star is known to be a kind of a system that is composed of two stars that are known to be gravitationally held together to and in orbit near each other.

Note that Binary stars in the night sky are ones that are often seen as a single object and thus Astronomers thought that a nova was a new star, appearing for the first time in the heavens, today we know that it is as a binary star system.

Learn more about astronomers  from

https://brainly.com/question/1141458

#SPJ1

Cart A has the greatest momentum.

The definition of momentum is "mass in motion." Since every item has mass, if it is moving, it must have momentum because its mass is in motion. Mass and velocity are two factors that affect momentum. According to an equation, an object's momentum is determined by multiplying its mass by its velocity.

                                                        p = mv

p = momentum

m = mass

v = velocity

Cart A

m₁ = 200 kg

v₁ = 4.8 m/s

p₁ = 200 × 4.8

p₁ = 960 kg-m/s

Cart B

m₂ = 200 + 20 = 220 kg

v₂ = 4 m/s

p₂ = 220 × 4

p₂ = 880 kg-m/s

Cart C

m₃ = 200 + 40 = 240 kg

v₃ = 3.8 m/s

p₃ = 240 × 3.8

p₃ = 912 m/s

Cart D

m₄ = 200 + 60 = 260 kg

v₄ = 3.5 m/s

p₄ = 260 × 3.5

p₄ = 910 kg-m/s

Hence concluded, cart A has the greatest momentum.

Learn more about momentum here:

https://brainly.com/question/24030570

#SPJ4