3. compare the means of each group (aspd and no aspd). what can you say about the narcissism scores of the aspd group compared to the no aspd group? (5 pts)

Fg=Fc has already been stated; hence the following equivalence can be written: mc*(2*/T)2*rcj = G*mc*mj / rcj2.

The gravitational force, as stated by Newton's Universal Law of Gravitation, is the only force acting on Calisto while it is spinning around Jupiter: rcj2 = Fg = G*mc*mj. where G = 6.67*1011 N*m2/kg2, mc = mass of Callisto, mj = mass of Jupiter, and rcj = distance from Jupiter, where rcj = 1.88*109 m for Callisto. In addition, there is a force known as the centripetal force, which is identical to the gravitational force we previously described and keeps Callisto in orbit. The orbital period and this centripetal force are related in the following ways: Fc equals m*(2*/T)2*rcj. We must translate the orbital period from days to seconds in order to be consistent in our use of units: T = 1.44*106 seconds (86,400 seconds per day x 16.69 days) .

Learn more about The gravitational force here:

https://brainly.com/question/14565722

#SPJ4

The required wavelength for the photon necessary to induce the given transition is calculated to be 5.163 × 10⁻³¹ m.

The energy difference between the ground state and an excited electronic state is 3.85 × 10⁵ j/mol.

ΔE = 3.85 × 10⁵ j/mol

We know that,

Planck's constant h = 6.626 × 10⁻³⁴ Js

Speed of light c = 3 × 10⁸ m/s

The formula for ΔE is known as, ΔE = E₂ - E₁ = h c/λ

where, λ is the wavelength

Making λ as subject in the above formula, we have,

ΔE = h c/λ

λ = h c/ΔE

λ = (6.626 × 10⁻³⁴ × 3 × 10⁸)/(3.85 × 10⁵) = 5.163 × 10⁻³¹ m

To know more about wavelength:

https://brainly.com/question/2094945

#SPJ4

Explanation:

If Earth did not rotate or revolve, there would be no day or night, and no seasons. The lack of tilt would result in a constant and uniform distribution of sunlight, leading to a lack of temperature variation and climatic zones.

It's possible that life could still exist in such conditions, but it would likely be limited to areas with constant access to sunlight and warm temperatures. The absence of climatic zones would also lead to a lack of diversity in species, as many would not be able to adapt to the uniform conditions.

It's not possible to say where one would want to live in such conditions, as the lack of variation would make the entire planet similar in terms of climate and habitat.

The answer is high susceptibility;  low retentivity. Iron is good for creating solenoids because its high susceptibility and low retentivity allow it to be magnetized and demagnetized quickly.

Its high compliance and low iron retention make it a good choice for making magnetic coils. These properties make iron easier to magnetize and demagnetize, making it an ideal material for making magnetic circuits and other magnetically sensitive devices.

Iron magnetizes faster, but loses its magnetism once the inductor magnet is removed. For example, soft iron should have high flexibility but low retention. This property of soft iron is very useful for making temporary electromagnets, where we need strong but temporary magnets.

To know more about Solenoids:

brainly.com/question/1873362

#SPJ4

In this case, no net force is acting on the car, so the correct free-body diagram is the one that shows the car with no net force.

Net force is defined as the sum of all the forces acting on an object. It is the total force that is responsible for changing an object's motion. Net force is a vector quantity that is calculated by adding up all the forces acting on an object. It is the resultant force that affects the object's motion, direction, and speed.

The correct free-body diagram for a car coasting over a circular hill is the one that shows the car with no net force acting on it. This means that the only forces acting on the car are the force of gravity, the normal force from the road, and the friction force from the road. The force of gravity is directed down the hill and is equal to the car's weight. The normal force from the road is directed perpendicular to the surface of the road and is equal to the car's weight. The friction force from the road is directed opposite to the direction of the car's motion and is equal to the car's weight multiplied by the coefficient of friction.

Therefore, in this case, no net force is acting on the car, so the correct free-body diagram is the one that shows the car with no net force. This is because the sum of all the forces acting on the car is equal to zero.

To know more about net force click-
https://brainly.com/question/25239010
#SPJ4

If the cells are left at room temperature after lysing and adding ONPG, the reaction between ONPG and the remaining active beta-galactosidase in the lysed cells may proceed too slowly or not at all, leading to inaccurate results.

The reaction between ONPG and beta-galactosidase is an exothermic reaction and is temperature dependent, meaning that it proceeds more rapidly at higher temperatures.

Placing the lysed cells back in the water bath after lysing and adding ONPG ensures that the reaction is taking place at a consistent temperature, allowing for accurate and reproducible results.

Leaving the cells at room temperature may result in variations in reaction rate, leading to inconsistencies in the data. To ensure accurate results, it is important to control the temperature during the reaction.

To know more about  exothermic reaction  click on the link below:

https://brainly.com/question/10373907#

#SPJ11

The correct option is (a)Tragus. The wedge-shaped prominence that projects from the cheek over the ear passage for protection is commonly referred to as the Tragus.

It is located at the opening of the ear canal and helps to protect the ear from external damage and debris. The tragus is a small, fleshy structure with a rounded or pointed tip that can be felt when pressing on the ear. It plays an important role in hearing as it helps to direct sound into the ear canal, and it is also a common site for ear piercings. One of the main functions of the tragus is to protect the ear from external damage and debris. It acts as a barrier, helping to prevent foreign objects from entering the ear canal and potentially causing harm. This is especially important given the delicate and sensitive nature of the structures within the ear, including the eardrum and delicate bones of the middle ear. In addition to its protective function, the tragus also plays an important role in hearing. By directing sound into the ear canal, the tragus helps to improve the quality of sound that is received by the ear. This improved sound quality can result in better hearing and a clearer perception of the sounds around us. Finally, the tragus is a common site for ear piercings. Given its fleshy nature and relatively prominent position, it is an ideal location for piercing and can provide a visually appealing accent to the ear. There are many different styles and types of jewelry that can be used with a tragus piercing, allowing individuals to express their unique sense of style.

The complete question is:

The wedge shaped prominence that projects from the cheek over the ear passage fro protection is identified as the:

(a)Tragus

(b)Antihelix

(c) Helix

(d) Concha

Learn more about tragus here :

https://brainly.com/question/15498565

#SPJ4

To convert from meters per second (m/s) to miles per hour (mi/hr), the conversion factors needed are:

B. 60 minutes = 1 hour

F. 1 km = 0.6214 miles

First, the velocity in m/s needs to be converted to km/hr, then to mi/hr.

Convert m/s to km/hr :

3.00 x 10⁸ m/s * (1 hr/3600 s) * (1 km/1000 m) = 83333.33 km/hr

Convert km/hr to mi/hr:

83333.33 km/hr * 0.6214 mi/km = 51667.07 mi/hr

Velocity is a physical quantity that describes the rate of change of an object's position with respect to time. It is a vector quantity that has both magnitude and direction. The magnitude of velocity is the speed of an object, while the direction of velocity indicates the direction of an object's motion. The unit of velocity is typically meters per second (m/s) or miles per hour (mi/hr).

To know more about velocity, visit:

https://brainly.com/question/28738284

#SPJ4

The magnitude of the electric force, F, on the test charge is given by:

F = k * q0 * (p / (r^2))

The magnitude of the electric force on a test charge q0 placed at a distance r away from a dipole can be calculated using Coulomb's law. Coulomb's law states that the force between two charges is proportional to the product of the charges and inversely proportional to the square of the distance between them.

For a dipole, the electric force can be calculated by considering the force between the test charge and each of the charges in the dipole and then adding the forces vectorially.

A dipole is a two-point electrical charge system, where one point has a positive charge and the other has an equal and opposite negative charge.

Dipoles are fundamental to many electrical and chemical processes, and they play a crucial role in molecular bonding and interactions. Dipoles can also be created artificially, such as in an electric dipole or a magnetic dipole.

The magnitude of the electric force, F, on the test charge is given by:

F = k * q0 * (p / (r^2))

where k is Coulomb's constant (approximately 8.99 x 10^9 N(m/C)^2), p is the dipole moment, and r is the distance between the test charge and the dipole. The dipole moment can be calculated from the magnitude of the charges in the dipole and the separation distance between them.

To know more about dipole refer to:

brainly.com/question/14058533

#SPJ4

The linear speed of a satellite in a circular orbit 1350 kilometers above earth making one complete revolution every 180 minutes is 270.38 km/min.

Linear speed is measured in distance units per unit of time (e.g. km per minute). The word linear is used because straightening out the arc traveled by the object along the circle results in a line of the same length so that the usual definition of speed as distance over time can be used. The radius of the satellite in a circular orbit = 1350 km. The radius of the earth = 6400 km. So the total radius of the satellite around the earth's surface, r= 1350+6400 = 7750 km. The time period of making one revolution, T= 180 minutes. So, the linear velocity of the satellite is given as, v=2π×r/T. So, v=2π×7750/180= 270.38 km/min.

For further learning about the speed of the satellite, refer to the link:

https://brainly.com/question/27340476

#SPJ4

A transition in the Balmer series for hydrogen has an observed wavelength of 434 nm. This transition is from the n=5 energy level to the n=2 energy level.

Transitions in the Balmer series all terminate in n=2, which is the lowest energy level of the hydrogen atom.

The four Balmer lines (Hα, Hβ, Hγ, and Hδ) are typically the brightest in the visible spectrum and are observed in the emission spectra of many elements. The Rydberg equation can be used to calculate the wavelength of the Balmer series lines:

\lambda = R \Big(\dfrac{1}{m^2}-\dfrac{1}{n^2}\Big)

Where R is the Rydberg constant (1.097 x 10-2 nm-1), m is the lower energy level (n=2), and n is the upper energy level (n>2). In the case of the 434 nm Balmer line, the transition is from n=5 to n=2, so the equation would be:

\lambda = 1.097 x 10-2 \Big(\dfrac{1}{2^2}-\dfrac{1}{5^2}\Big) = 4.34 x 10-2 nm

Since the wavelength of the Balmer line is 434 nm, the transition is from n=5 to n=2, as expected.

Learn more about the balmer series:

https://brainly.com/question/14767916

#SPJ4

The coaster's maximum height will be equal to the height at point A. The conservation of energy principle asserts that a system's total mechanical energy is preserved.

if no non-conservative forces operate on it. The frictionless roller coaster in this context is a system with only conservative forces operating on it. As a result, when the coaster lands on the ramp, the initial potential energy at point A equals the end potential energy.The coaster's maximum height will be equal to the height at point A. The conservation of energy principle asserts that a system's total mechanical energy is preserved.  At the coaster's greatest height, the potential energy is maximal and the kinetic energy is zero. Because the system's entire mechanical energy is preserved, the potential energy at the greatest height is equal to the starting potential energy at the start.

learn more about energy  here:

https://brainly.com/question/1932868

#SPJ4

20Km/h is  the velocity of B with respect to A.

What is meant by relative velocity?

The velocity of an object in relation to another observer is known as its relative velocity. It is the pace at which one object's relative location changes in relation to another object over time.

Only possible to quantify with our current knowledge and technology is the relative velocity of an object. The pace at which an object's position changes over time in relation to its absolute spatial coordinates is known as absolute velocity. Any frame of reference is irrelevant to absolute velocity.

Va is 40Km/h

Vb is 60 Km/h

Vba will be Vb - Va i.e. 60-40 Km/h

Vba is 20Km/h

To learn more about relative velocity use link below:

https://brainly.com/question/17228388

#SPJ4

The speed of an object at the bottom of a vertical drop is calculated to be 24.3 m/s.

The speed of an object at the bottom of a vertical drop can be determined using the equation of motion,

v = √(2gh), where

v is the final velocity (speed),

g is acceleration due to gravity (9.8 m/s²), and

h is the height of the drop (30.0 m).

Plugging in the values, we get,

v = √(2 × 9.8 × 30)

v = √(588)

v ≈ 24.3 m/s

So, the speed of the car at the bottom of the drop is approximately 24.3 m/s.

To know more about speed:

https://brainly.com/question/30465884

#SPJ4

The distance between the two cities on the same longitude is 731.3 miles.

The distance between Dallas, Texas, and Omaha, Nebraska can be found using the spherical law of cosines. The formula is as follows:

d = acos(sin(lat1) x sin(lat2) + cos(lat1) x cos(lat2) x cos(long2 - long1)) x r

Where d is the distance between the two points, lat1 and lat2 are the latitudes of the two points, long2 - long1 is zero since the two cities are on the same longitude, and r is the radius of the earth (4000 miles).

Converting the latitude of each city to radians:

lat1 = 32.7944° = 32.7944 x pi/180 = 0.5718 radians

lat2 = 41.2639° = 41.2639 x pi/180 = 0.7184 radians

Inserting the values into the formula:

d = acos(sin(0.5718) x sin(0.7184) + cos(0.5718) x cos(0.7184) x cos(0)) x 4000

d = 731.3 miles

Rounding the answer to one decimal place:

d = 731.3 miles = 731.3 miles ≈ 731.3 miles

The distance between Dallas, Texas, and Omaha, Nebraska is approximately 731.3 miles.

Learn more on longitude distance here: https://brainly.com/question/28173702

#SPJ1

The complete question is:

Find the distance between the cities. Assume that Earth is a sphere of radius 4000 miles and that the cities are on the same longitude (one city is due north of the other). (Round your answer to one decimal place.)

City Latitude

Dallas, Texas 32° 47' 39'' N.

Omaha, Nebraska 41° 15' 50'' N.

The sinusoidal curve of the downstroke of a piston is different from the upstroke because the downstroke is powered by the pressure of the combustion chamber, while the upstroke is powered by the spring force of the valve.

This means that the downstroke will have a higher peak pressure than the upstroke, resulting in a sinusoidal curve with a larger amplitude. Additionally, the downstroke will have a faster acceleration than the upstroke due to the higher pressure in the combustion chamber, resulting in a steeper slope in the sinusoidal curve.

To know more about pressure please refer:

https://brainly.com/question/29341536

#SPJ4

Electrically, potassium is configured as [Ne] 3s2 3p6 4s1. One electron will be removed from the fourth subshell of the outermost shell, or 4s, to produce a +1 cation.

Potassium is an element with the chemical symbol K and atomic number 19. (which stands for kalium in Neo-Latin).Potassium has an electron structure of 1s 2 2s 2 2p 6 3s 2 3p 6 4s in its ground state. This electron configuration demonstrates that the potassium atom's final shell contains an unpaired electron. One electron of potassium (Z=19) is located in the 4s subshell.Therefore, potassium has a valency of 1. In response to energy stimulation, potassium atom absorb energy. An important cation is potassium (k+).

learn more about atom Refer:brainly.com/question/11166120

#SPJ4

Answer: X=4

Explanation:

The axis of revolution is horizontal (y = 1), yet the functions are not solved for y, so use the shell method and the volume is is 134³ units.

Note that when x = 4, y must be between 1 and 5 because (4 = (1-3)² = (-2)²)  and(4 = (5-3)² = 2²)

Then the radius of each shell is y - 1.

And the length of each shell is (4-(y-3)²)

We get the integral

[tex]$ \(V=2\pi\int_{1}^{5}(y-1)(4-(y-3)^2) dy\)[/tex]

[tex]$=2\pi\int_{1}^{5}-y^3 + 7y^2 - 11y + 5 dy[/tex]

[tex]$ =2\pi (-y^4/4 + 7y^3/3 - 11y^2/2 + 5y)]^5_1[/tex]

[tex]$ =2\pi(64/3) = 128\pi/3)[/tex]

128π/3 = 134.04

Thus, the volume is is 134³ units.

Learn more about  volume

https://brainly.com/question/1578538

#SPJ4

The large intestine contains large pouch like structures called haustra. Haustra are sections of the large intestine that are separated by bands of muscle called taeniae coli.

These bands of muscle contract and relax, creating the haustra which help to move material through the large intestine. Haustra are large pouch-like projections found in the large intestine, also known as the colon. These haustra serve to increase the surface area of the colon, allowing for greater absorption of water and electrolytes from the remaining food matter. Additionally, the haustra can also help to mix and move the contents of the colon, promoting the elimination of waste from the body. The haustra are a characteristic feature of the large intestine, and their presence helps to distinguish it from the small intestine, which does not have these pouch-like projections.

To know more about intestine please refer: https://brainly.com/question/1751875

#SPJ4

The total force of the atmosphere on a 6x8 inch rubber square at sea level is approximately 14.7 pounds, due to atmospheric pressure.

The total force of the atmosphere on a 6x8 inch rubber square at sea level is due to atmospheric pressure, which is caused by the weight of the air above it. The standard atmospheric pressure at sea level is 14.7 pounds per square inch (psi).

So, the total force on the rubber square would be 6 x 8 x 14.7 = 705.6 pounds. It's important to note that atmospheric pressure can vary depending on altitude, temperature, and other factors, but at sea level it is commonly taken to be 14.7 psi.

Additionally, the smooth and thin nature of the rubber square means that it will be affected very little by surface tension or other forces, so the pressure alone will be the dominant force acting on it.

To know more about  atmospheric pressure click on the link below:

https://brainly.com/question/28310375#

#SPJ11

The observed speed of the ball can be calculated by dividing the distance it moves by the time it takes to move that distance. Using the given measurements, we have:

Speed = Distance / Time = 33.3 cm / 16.35 s = 2.037 cm/s

The most probable uncertainty in this calculation can be estimated by propagating the uncertainties in the measurement of distance and time. Using standard error propagation techniques, we get:

Uncertainty = sqrt( (0.1/33.3)^2 + (0.04/16.35)^2 ) * 2.037 = 0.008 cm/s

So, the best estimate for the observed speed of the ball is (2.037 ± 0.008) cm/s.

This answer corresponds to option D.

To Learn More About measurement click

https://brainly.com/question/4725561

#SPJ4

The measured NO₂ concentration of 130 μg/m³ exceeds the standard of 53 μg/m³.

To determine if the measured NO2 concentration of 130 μg/m3 exceeds the standard of 0.053 ppm, we need to convert the units to be the same.

1 ppm = 1,000 μg/m³

So, 0.053 ppm = 53 μg/m³

Therefore, the measured NO2 concentration of 130 μg/m³ exceeds the standard of 53 μg/m³.

Air quality measures assess the levels of pollutants in the air and determine their potential impact on human health and the environment. It typically involves monitoring a variety of substances such as particulate matter, nitrogen oxides, sulfur dioxide, ozone, and carbon monoxide. The data collected is then compared to national or international air quality standards to determine if the air is safe to breathe. Poor air quality can lead to respiratory problems, cardiovascular disease, and other health issues. It can also harm the environment by damaging crops, reducing visibility, and altering the climate. Effective air quality measures aim to reduce air pollution levels through regulations, incentives for clean technologies, and public education campaigns.

Learn more about Air quality:

brainly.com/question/5757344

#SPJ4

Option .b is the correct answer. the resolving power of a transmission electron microscope (TEM) is about 0.5 nanometers or less.

The settling force of a TEM alludes to its capacity to recognize two separate focuses as isolated in the picture delivered. It is a proportion of the best subtleties that a TEM can notice. The settling force of a TEM not entirely set in stone by the properties of the electron source, the electron optics and the example.

A TEM with a high settling power can create pictures with better subtleties and can be utilized to concentrate on more modest designs. Settling power is normally communicated in nanometers and a TEM with a settling force of 0.5 nm or less is considered to have a high settling power. This is on the grounds that it can recognize two separate focuses that are 0.5 nm or less separated as discrete in the picture delivered.

All in all, the settling force of a TEM is a significant variable that decides the capacity of the TEM to concentrate on fine subtleties of examples and it is regularly in the scope of 0.5 nm or less.

To learn more about Transmission Electron Microscope, refer:

https://brainly.com/question/13185817

#SPJ4

The velocity of the third mass can be determined by using the law of conservation of momentum.

When a watermelon explodes into three equal masses, and one mass moves east at 15.0 m/s and another mass moves at a velocity of 10.0 m/s 45.0° South of East, the momentum of the system remains constant, meaning the total momentum of the three masses must add up to zero.

Therefore, the velocity of the third mass can be found by subtracting the vectors representing the velocity of the first two masses from each other, as the third mass must have an equal and opposite velocity to balance the system.

Find out more about conservation of momentum.

brainly.com/question/29973485

#SPJ4

An alarm clock and a blinding light are under a glass jar that is filled with air. you can see the light and hear the alarm. If all the air is removed from the jar by the vacuum pump the sound about an alarm clock cannot be heard at all.

Draining the air out of a plastic bottle gradually will lower the sound's volume. Since sound cannot travel in a vacuum, the sound of an alarm clock cannot be heard at all.

When air is carefully removed out of the vicinity and a glass jar is placed underneath it, an alarm clock will gradually get quieter. This is true because sound is a mechanical wave that propagates through a medium.

The air molecules in the jar vibrate as sound waves pass through them, which allows us to hear the sound. When air is removed, there are fewer air particles available to vibrate and transmit sound waves, which weakens the sound.

Due to the virtually complete elimination of the air, there won't be much of it left to vibrate, therefore the sound will be essentially imperceptible.

To know more about vacuum :

brainly.com/question/29242274

#SPJ1

[tex]F = ma[/tex], or force is equal to mass times acceleration, is the second of Newton's second laws of motion, discovering the acceleration calculation formula.

Newton's second law provides a precise explanation of the adjustments that a force can make to a body's motion. According to this law, a body's momentum changes at a rate that is proportional to the force acting on it, both in magnitude and direction.

According to Newton's Second Law of Motion, when a force applies on a mass, the mass accelerates (gains speed) (object). A nice illustration of this rule of motion in action is while you are riding your bicycle. Your bicycle makes up the mass. The force is generated by your leg muscles pressing against the bicycle pedals. One more illustration is pulling a cart. In a grocery store, an empty cart is simpler to maneuver than one that is filled, and heavier loads need for greater acceleration.

Learn more about Newton's second law of motion here https://brainly.com/question/13447525

#SPJ4

After an electron is released at point P, the net force that the rods exert is 2.885 × 10¹⁵ N.

Given values:

Length of the non-conducting rod, l = 1.20 m

Charge on positive rod, +Q = +2.50 μC = +2.50 × 10⁻⁶ C

Charge on negative rod, -Q = -2.50 μC = -2.50 × 10⁻⁶ C

Distance from point P of each rod, x = 60 cm = 0.60 m

Calculation of Net electric force exerted on point P:

If we take an electron that is released at point P, the net electric force that it exerts will be as follows:

F = e. E ....(1)

Step 1:

The net electric field value is given as:

E  = E₁ cos Φ + E₂ cos Φ      

          = 2E₁ cos Φ                  -( 2 )

where E₁ & E₂ are electric fields due to positive and negative rods respectively. Φ is the phase angle

Step 2:

The electric field due to the positive rod is given as:

E₁ = k (λ/r)             - ( 3 )

where k is Coulomb's force constant

          λ is the linear charge density

           r is the distance between point P and half of the rod.

Now, the linear charge density is given as:

λ = Charge/length = Q/x

The value of r is given as:

r = √x²-a²

where x is the length of the rod

          a is half length of the rod

Applying values in the above equation, we get:

r = √x²-(x/2)²

r = √(1.20 m)²-(1.20/2)²

 = √1.08

 = 1.04 m

Substituting all the determined values in equation 3 we get:

E₁ = k (λ/r)

  = k [(Q/x)/r]

  = k [ Q/xr ]

  = (9×10⁹ Nm²/C²) [ |+2.50×10⁻⁶ C|/(1.20 m)(1.04 m)]

  = 1.803×10⁴ N/C

Step 3:

Similarly, the electric field due to the negative rod is given as:    

E₂ = k [ Q/xr ]

   = (9×10⁹ Nm²/C²) [ |-2.50×10⁻⁶ C|/(1.20 m)(1.04 m)]

   = 1.803×10⁴ N/C

Step 4:

Consider equation 2:

E  = 2E₁ cos Φ

From the figure, we get the phase angle as:

Φ = tan⁻¹ (0.60 m/0.60 m)

  = tan⁻¹ ( 1 )

  = π/4

Now, the electric field produced due to each rod is equal and mutually perpendicular. Thus, the net electric field after applying values can be calculated as:

E = 2(1.803×10⁴ N/C) cos π/4

         = 2(1.803×10⁴ N/C) (0.5)

         = 18030 N/C

Step 5:

Consider equation 1 :

F = e. E

where e is the charge on an electron

Applying values in the above equation we get:

F = (1.6 × 10⁻¹⁹ C)(18030 N/C)

 = 2.885 × 10⁻¹⁵ N

Therefore, the magnitude of the net force that the rods exert after an electron is released at point P is  2.885 × 10⁻¹⁵ N.

Learn more about electric force here: https://brainly.com/question/1634182

#SPJ4

The kinetic energy of an object increases as its velocity increases (option D).

Kinetic energy is the energy possessed by an object because of its motion, equal (nonrelativistically) to one half the mass of the body times the square of its speed.

Kinetic energy depends on the velocity of the object squared. This means that when the velocity of an object doubles, its kinetic energy quadruples.

The kinetic energy of an object can be calculated as follows:

K.E = ½mv²

Therefore, option D is the correct answer.

Learn more about kinetic energy at: https://brainly.com/question/26472013

#SPJ1

Gas molecules which has greater average molecular speed at 25° is    a)CH₄. So,correct option is a  

As per Active Atomic Hypothesis of Gases, it makes sense of that gas particles are in constant movement and display preferably flexible impacts. Gas particles are found in a steady condition of irregular movement and particles generally travel in an orderly fashion until and except if they crash into another molecule. It likewise makes sense of that the typical motor energy of a gathering of gas particles is straightforwardly relative to temperature. In an ideal gas condition, the speed related with a gathering of particles can be found.

We know that average molecular speed is inversely proportional to the molecular mass of the gas. In other words

average molecular speed α 1 / Molecular mass

So,

Molecular mass of CH₄=12+4ˣ1=16g

Molecular mass of Kr=84g

Molecular mass of N₂=14ˣ2=28g

Molecular mass of CO₂=12+16ˣ2=44g

Molecular mass of Ar=40g

On comparing ,we can see that methane(CH₄) has lowest molecular mass among all gas molecules.So,average molecular speed of methane will be greatest.

Hence,correct option is a.

To know more about average molecular speed, visit here:

https://brainly.com/question/28069275

#SPJ4

(Complete question) is:

Which gas has molecules with the greatest average molecular speed at 25 degrees?

a)CH₄

b)Kr

c)N₂

d)CO₂

d)Ar

Scenarios which is an example of the interval scale is the outside temperature (in degrees Fahrenheit),so correct option is D.

Interval scale is a type of measurement scale used in statistics and research. It refers to a scale in which the distances between the scale points have meaning, but there is no true zero point. This means that the intervals between the scale points are equal and represent equal amounts of the attribute being measured, but the absence of a true zero point means that the scale cannot be used to make ratios between the values.

The scenario that is an example of the interval scale is the outside temperature (in degrees Fahrenheit). The interval scale is a type of measurement scale that has equal intervals between values, and a meaningful zero point. This means that the difference between two values is meaningful, and that it is possible to perform arithmetic operations such as addition and subtraction with the values.

In the case of the outside temperature, the difference between 40°F and 60°F is the same as the difference between 60°F and 80°F, and the value of zero°F has a meaningful interpretation as the temperature at which water freezes. This makes the outside temperature a good example of the interval scale.

In contrast, the other examples you listed are not examples of the interval scale. The runner's time in a race, the price of a stock, and an undergraduate's major are examples of nominal or ordinal scales, not interval scales.

In conclusion, the outside temperature (in degrees Fahrenheit) is an example of the interval scale, while the runner's time in a race, the price of a stock, and an undergraduate's major are not.

To know more about temperature visit:

https://brainly.com/question/23411503

#SPJ4