During a reaction in an aqueous solution, the concentration of bactants
decreases and the amount of products increases. How do these changes in
concentration affect the reaction rate?
A. The reaction rate decreases.
B. The reaction rate varies unpredictably.
C. The reaction rate increases.
D. The reaction rate stays the same.
Answer:
my define it will be turst me is c
What is the difference between a physical change and a chemical change. Give an example of each.
Answer:
A physical change is a change in form.
A Chemical change is a change in materials.
Explanation:
Example of a physical change would be an ice cube meting.
Example of a chemical change would be mixing food coloring into a cup of water.
In an activity in which dye was added to two beakers of water, the beaker on the hot
plate mixed the dye into the water much faster then the beaker at room temperature.
Which statement best explains why there is a difference in the speed at which the
dye mixed in the water between the two beakers.
Write a balanced, net ionic equation for the precipitation reaction of CaCl2 and Cs3PO4 in an aqueous solution. Remember to include the proper physical states and charges of ions.
Answer:
3Ca²⁺(aq) + 2PO4³⁻(aq) → Ca3(PO4)2(s)
Explanation:
The calcium of CaCl2 reacts with the phosphate ion od Cs3PO4 to produce the insoluble salt Ca3(PO4)2 and CsCl. The unbalanced reaction is:
CaCl2(aq) + Cs3PO4(aq) → Ca3(PO4)2(s) + CsCl(aq)
To balance the calciums:
3CaCl2(aq) + Cs3PO4(aq) → Ca3(PO4)2(s) + CsCl(aq)
The chlorides:
3CaCl2(aq) + Cs3PO4(aq) → Ca3(PO4)2(s) + 6CsCl(aq)
And the Cs:
3CaCl2(aq) + 2Cs3PO4(aq) → Ca3(PO4)2(s) + 6CsCl(aq)
This is the balanced reaction, the ionic equation is:
3Ca²⁺(aq) + 6Cl⁻(aq) + 6Cs⁺(aq) + 2PO4³⁻(aq) → Ca3(PO4)2(s) + 6Cs⁺(aq) + 6Cl⁻(aq)
Subtracting the ions that don't react:
3Ca²⁺(aq) + 2PO4³⁻(aq) → Ca3(PO4)2(s)This is the net ionic equation
The balanced, net ionic equation for the precipitation reaction of CaCl₂ and Cs₃PO₄ in an aqueous solution can be written as follows:
3Ca²⁺(aq) + 2PO₄³⁻(aq) -> Ca₃(PO₄)₂(s)
A balanced equation is a chemical equation in which the number of atoms of each element on both sides of the equation is equal. It follows the law of conservation of mass, which states that matter cannot be created or destroyed in a chemical reaction.
In a balanced equation, the coefficients in front of each compound or molecule indicate the number of moles or molecules involved in the reaction. By adjusting these coefficients, the equation is balanced in terms of both mass and charge.
In this equation, Ca²⁺ ions from calcium chloride (CaCl₂) combine with PO₄³⁻ ions from cesium phosphate (Cs₃PO₄) to form solid calcium phosphate (Ca₃(PO₄)₂). The net ionic equation represents only the species directly involved in the reaction and excludes spectator ions, which do not participate in the formation of the precipitate. The physical states are denoted as (aq) for aqueous and (s) for solid.
Learn more about Balanced equation, here:
https://brainly.com/question/31242898
#SPJ6
Predict a likely mode of decay for each of the following unstable nuclides.
a. Ti-57
b. Zn-59
c. Ba-123
d. Cr-60
Answer:
D
Explanation:
D
The mode of decay for each of the following unstable nuclides are (a) ⁵⁷Ti is beta decay (b) ⁵⁹Zn is Positron emission (c) ¹²³Ba is Positron emission (d) ⁶⁰Cr is beta decay.
How to determine the mode of decay ?Change in mass/atomic number: if A decrease by 4 and Z decrease by 2 then the mode of decay is alpha decay.Change in mass/atomic number: if A unchanged and Z increase by 1 then the mode of decay is beta decay.Change in mass/atomic number: if A unchanged and Z is also unchanged then the mode of decay is gamma decay.Change in mass/atomic number: if A unchanged and Z decrease by 1 then the mode of decay is Positron emission.Change in mass/atomic number: if A unchanged and Z decrease by 1 then the mode of decay is Electron capture.Now lets predict the mode of decay for each of the following:
(a) Ti - 57
⁵⁷Ti₂₂ → ⁵⁷V₂₃ + ⁰e₋₁
Here A is unchanged and Z is increases by 1 so the mode of decay is beta decay.
(b) Zn - 59
⁵⁹Zn₃₀ → ⁵⁹Cu₂₉ + ⁰e₊₁
Here A is unchanged and Z is decreases by 1 so the mode of decay is Positron emission.
(c) Ba - 123
¹²³Ba₅₆ → ¹²³Cs₅₅ + ⁰e₊₁
Here A is unchanged and Z is decreases by 1 so the mode of decay is Positron emission.
(d) Cr -60
⁶⁰Cr₂₄ → ⁶⁰Mn₂₅ + ⁰e₋₁
Here A is unchanged and Z is increases by 1 so the mode of decay is beta decay.
Thus, from above conclusion we can say that (a) ⁵⁷Ti is beta decay (b) ⁵⁹Zn is Positron emission (c) ¹²³Ba is Positron emission (d) ⁶⁰Cr is beta decay.
Learn more about the Mode of decay here: https://brainly.com/question/2553049
#SPJ2
Kavitha was doing an experiment to find out the percentage of water absorbed by the soil. She observed that soil 'sample A' absorbed more water compared to soil 'sample B'. If soil sample B is loamy soil, sample A contains which type of soil ?
{Note :- this question contains 2 points so please type the answer in a " short answer " type question
Answer:
Clay soil
Explanation:
We were told in the question about two samples of soil A and B. Sample B was confirmed to be loamy soil but it was discovered that sample A absorbed more water than sample B.
We now have to think about the kind of soil that has the greatest ability to absorb water. That soil type is called clay soil.
Clay soils possess a large surface area which is responsible for its ability to absorb more water. Hence, clay soil has the greatest water holding capacity.
1. How many atoms of chlorine are present in 1.70x1023 molecules Cl2?
Explanation:
the answer is in the image above
Kolbe's reaction with an example
Answer:
∵
Explanation:
Aluminum reacts with excess copper(II) sulfate according to the unbalanced reaction
Al(s) + CuSO4(aq) −→
Al2(SO4)3(aq) + Cu(s)
If 2.98 g of Al react and the percent yield of
Cu is 46.4%, what mass of Cu is produced?
Answer in units of g.
Answer: The mass of Cu produced is 4.88 g
Explanation:
The number of moles is defined as the ratio of the mass of a substance to its molar mass.
The equation used is:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)
Given mass of aluminum = 2.98 g
Molar mass of aluminum = 27 g/mol
Plugging values in equation 1:
[tex]\text{Moles of aluminum}=\frac{2.98g}{27g/mol}=0.1104 mol[/tex]
The given chemical equation follows:
[tex]2Al(s)+3CuSO_4(aq)\rightarrow Al_2(SO_4)_3(aq)+3Cu(s)[/tex]
By the stoichiometry of the reaction:
If 2 moles of aluminum produces 3 moles of Cu
So, 0.1104 moles aluminium will produce = [tex]\frac{3}{2}\times 0.1104=0.1656mol[/tex] of Cu
Molar mass of Cu = 63.5 g/mol
Plugging values in equation 1:
[tex]\text{Mass of Cu}=(0.1656mol\times 63.5g/mol)=10.516g[/tex]
The percent yield of a reaction is calculated by using an equation:
[tex]\% \text{yield}=\frac{\text{Actual value}}{\text{Theoretical value}}\times 100[/tex] ......(2)
Given values:
% yield of product = 46.4 %
Theoretical value of the product = 10.516 g
Plugging values in equation 2, we get:
[tex]46.4=\frac{\text{Actual value of Cu}}{10.516g}\times 100\\\\\text{Actual value of Cu}=\frac{46.4\times 10.516}{100}\\\\\text{Actual value of Cu}=4.88g[/tex]
Hence, the mass of Cu produced is 4.88 g
Cu20(s) + C(s) - 2Cu(s) + CO(g)
To perform this synthesis, the team added 114.2 grams of Cu20 to 11.1 grams of C to form 87.1 grams of Cu.
In this copper synthesis reaction, what is the limiting reagent and the excess reagent?
Answer:
That means Cu2O is limiting reagent and C is excess reagent
Explanation:
Based on the reaction, 1 mole of Cu2O reacts per mole of C. The ratio of reaction is 1:1.
To solve this question we need to convert the mass of each reactant to moles. The reactant with the lower amount of moles is limiting reactant and the excess reactant is the reactant with the higher number of moles.
Moles Cu2O -Molar mass: 143.09 g/mol-
114.2g Cu2O * (1mol / 143.09g) = 0.798 moles Cu2O
Moles C -Molar mass: 12.01g/mol-
11.1g C * (1mol / 12.01g) = 0.924 moles C
That means Cu2O is limiting reagent and C is excess reagent
a. Compound A and compound B are constitutional isomers with molecular formula C3H7Cl. When compound A is treated with sodium methoxide, a substitution reaction predominates. When compound B is treated with sodium methoxide, an elimination rection predominates. Propose structures A and B.
b. An unknown compound with molecular formula C6H13Cl is treated with sodium ethoxide to produce 2,3-dimethyl-2-butene as the major product. Identify the structure of the unknown compound.
Answer:
história phkfk
Explanation:
guiooupigjdytrss
Which type of chemistry studies the chemical reactions that occur in the human body?
O biochemistry
O materials chemistry
O physical chemistry
O environmental chemistry
Answer:
Which type of chemistry studies the chemical reactions that occur in the human body? .
biochemistry
The correct answer is biochemistry.
What is Biochemistry?Biochemistry is the study of the chemical process that occur in living things.Why other Options are incorrect?Materials Chemistry is the section of Materials Science and Engineering that investigates the chemical nature of materials.Physical chemistry is the branch of chemistry that deals with physical structure of chemical compound. Environmental chemistry is the study of chemical process that deals with environment.
Learn more about Biochemistry here
https://brainly.com/question/13128204
#SPJ2
Calculate [H3O+] and [OH−] for each of the following solutions at 25 ∘C given the pH.
pH= 11.22
Answer: The value of [tex][H_{3}O^{+}][/tex] is [tex]6.025 \times 10^{-12}[/tex] M and [tex][OH^{-}][/tex] is [tex]1 \times 10^{-14}[/tex].
Explanation:
pH is the negative logarithm of concentration of hydrogen ion.
It is given that pH is 11.22. So, the value of concentration of hydrogen ions is calculated as follows.
[tex]pH = - log [H^{+}]\\11.22 = - log [H^{+}]\\conc. H^{+} = 6.025 \times 10^{-12}[/tex] M
Let the value [tex]6.025 \times 10^{-12}[/tex] is considered as equal to 0. Hence, the relation between pH and pOH value is as follows.
pH + pOH = 14
0 + pOH = 14
pOH = 14
Now, pOH is the negative logarithm of concentration of hydroxide ions.
Hence, [tex][OH^{-}][/tex] is calculated as follows.
[tex]pOH = - log [OH^{-}]\\14 = - log [OH^{-}]\\conc. OH^{-} = 1 \times 10^{-14} M[/tex]
Thus, we can conclude that the value of [tex][H_{3}O^{+}][/tex] is [tex]6.025 \times 10^{-12}[/tex] M and [tex][OH^{-}][/tex] is [tex]1 \times 10^{-14}[/tex].
When metal X is treated with sodium hydroxide, a white precipitate A is obtained which is soluble in excess NaOH to give a soluble complex B. Compound A is soluble in dilute HCl to form compound C. When the compound A is heated strongly it gives compound D which is used to extract metal. a) Identify X, A, B, C, D supporting your answer(s) with appropriate chemical reactions. b) At which group and period does X fall?
Answer:
See explanation
Explanation:
If we look at the question closely, we will notice that the metal in question must be aluminum.
When aluminum is treated with sodium hydroxide, a precipitate, aluminium hydroxide is formed as follows;
Al(s) + 3NaOH(aq) ---> Al(OH)3(s) + 3Na(s)
In excess sodium hydroxide, the precipitate dissolves as follows;
Al(OH)3(s) + NaOH(aq) ----> [NaAlOH4]^-(aq)
The complex formed is sodium aluminum tetrahydroxo aluminate III.
The reaction of aluminum faith dilute hydrochloric acid occurs as follows to yield aluminum chloride;
2Al(s) + 6HCl(aq) ----> 2AlCl3(aq) + 3H2(g)
When aluminum metal is heated strongly, it yields aluminum oxide;
2Al(s) + 3O2(g) ---> Al2O3(s)
Although Joule is the unit of energy we normally use in science, people also use the Kilocalorie and the gram calorie when describing energy; especially where food energy is concerned. These are potentially confusing because 1 kilocalorie does not equal 1 gram calorie. Here's how it works:
• It takes 4.184 J to heat one gram of water 1 K
• It takes one gram calorie to heat one gram of water 1 K
• This means that 1 gram calorie = 4184
• 1 kilocaloric equals 1000 gram calories
• This means that 1 kilocalorie - 4184
The kilocalorie is also called the Dietary Calorie or Food Calorie. Convert your results to kilocalories per gram.
Answer:
• 1 kilocaloric equals 1000 gram calories
• 1 kilocalorie is equals to 4184 Joules of energy.
Explanation:
One kilocalorie is equals to 1000 gram calories because one kilo is equals to or have 1000 grams. One kilocalorie is equals to 4184 Joules of energy while on the other hand, one calorie is equals to 4.184 Joules of energy because one calorie is 1000 times smaller than Kilocalorie so calorie has also 1000 times lower energy than kilocalorie. Kilo is the prefix which means 1000 so we can say that One kilocalorie is equals to 1000 gram calories.
Identify the isoelectronic elements.
i. Cl-, F-, Br-, I-, At-
ii. Ne, Ar, Kr, Xe, He
iii. N3-, S2-, Br-, Cs+, Sr2+
iv. N3-, O2-, F-, Na+, Mg2+
v. Li+, Na+, K+, Rb+,Cs+
Answer:
iv. N³⁻, O²⁻, F⁻, Na⁺, Mg²⁺
Explanation:
Isoelectronic elements are those that have the same number of electrons. So, if at least 2 elements differ in their number of electrons, the series is not of isoelectronic elements.
To know the number of electrons we will consider the atomic number and add electrons if it is an anion and subtract electrons it is a cation.
Identify the isoelectronic elements.
i. Cl⁻, F⁻, Br⁻, I⁻, At⁻. NO. Cl⁻ has 18 electrons (17+1) and F⁻ has 10 electrons (9+1). ii. Ne, Ar, Kr, Xe, He. NO. Ne has 10 electrons and Ar has 18. iii. N³⁻, S²⁻, Br⁻, Cs⁺, Sr²⁺. NO. N³⁻ has 10 electrons (7+3) and S²⁻ has 18 (16+2).iv. N³⁻, O²⁻, F⁻, Na⁺, Mg²⁺. YES. They all have 10 electrons v. Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺. NO. Li⁺ has 2 electrons (3-1) and Na⁺ has 10 (11-1).Acetic acid has a Ka of 1.75x10^-5. The weak acid approximation (for this class) would be allowed for which of the following initial concentrations of acetic acid?
a. 1.75E^-6
b. 1.75E^-5
c. 0.00175
d. 0.0175
e. 0.175
Answer:
e. 0.175
Explanation:
The equilibrium constant of a reaction is the value of its reaction quotient when at equilibrium. The equilibrium concentration of a product or reactant depends on the initial concentrations and equilibrium constant of the reactants and products.
The weak acid approximation depends on the initial concentration and equilibrium constant ([tex]K_a[/tex]). The farther the initial concentration and equilibrium constant are from one another, the more likely the approximation would be valid.
Which best expresses the uncertainty of the measurement 32.23 cm?
A.) ±0.05 cm
B.) 0.1 cm
C.) 1%
D.) ±0.01 cm?
Answer:
D.) ±0.01 cm?
Explanation:
Since 32.23 cm has two decimal places, the uncertainty is taken as one-half the last decimal pace.
The last decimal place is 0.03. Half of this is 0.03 cm/2 = 0.015 cm.
Since we cannot go below two decimal places, we ignore the 5 in 0.015 cm.
So, we have our uncertainty as 0.01 cm.
So, the best expression of the uncertainty in the measurement 32.23 cm is ± 0.01 cm.
So, the answer is D. which is ± 0.01 cm.
how many grams of hydrogen chloride can be produced from 1.00g of hydrogen and 55.0g of chlorine? what is the limiting reactant?
equation is H2 + Cl2 = 2HCl
Answer:
[tex]m_{HCl}=36.1gHCl[/tex]
Explanation:
Hello there!
In this case, according to the given information, it turns out possible for us to calculate the required grams of HCl by firstly identifying the limiting reactant via the moles of each reactant as they are in a 1:1 mole ratio:
[tex]n_{H_2}=1.00gH_2*\frac{1molH_2}{2.02gH_2}=0.500molH_2\\\\ n_{Cl_2}=55.0gCl_2*\frac{1molCl_2}{70.9gCl_2}=0.776molCl_2[/tex]
Thus, we infer the hydrogen is the limiting reactant and therefore we use its 1:2 mole ratio with HCl whose molar mass is 36.46 g/mol:
[tex]m_{HCl}=0.500molH_2*\frac{2molHCl}{1molH_2}*\frac{36.46gHCl}{1molHCl}\\\\m_{HCl}=36.1gHCl[/tex]
Regards!
assume in a different experiment, you prepare a mixture containing 10.0 M FeSCN2+, 1.0 M H+, 0.1 MFe3+ and 0.1 M HSCN. Is the initial mixture at equilibrium? If not, in what direction must the reactionproceed to reach equilibrium? (Hint: You will need to use the value of Kc you determined in the lab
Answer:
The mixture is not in equilibrium, the reaction will shift to the left.
Explanation:
Based on the equilibrium:
Fe³⁺+ HSCN ⇄ FeSCN²⁺ + H⁺
kc = 30 = [FeSCN²⁺] [H⁺] / [Fe³⁺] [HSCN]
Where [] are concentrations at equilibrium. The reaction is in equilibrium when the ratio of concentrations = kc
Q is the same expression than kc but with [] that are not in equilibrium
Replacing:
Q = [10.0M] [1.0M] / [0.1M] [0.1M]
Q = 1000
As Q > kc, the reaction will shift to the left in order to produce Fe³⁺ and HSCN untill Q = Kc
Compare the solubility of silver chloride in each of the following aqueous solutions:
a. 0.10 M AgNO3 More soluble than in pure water.
b. 0.10 M NaCI Similar solubility as in pure water
c. 0.10 M KNO3 Less soluble than in pure water.
d. 0.10 M NH4CH3COO
Answer:
Compare the solubility of silver chloride in each of the following aqueous solutions:
a. 0.10 M AgNO3 More soluble than in pure water.
b. 0.10 M NaCI Similar solubility as in pure water
c. 0.10 M KNO3 Less soluble than in pure water.
d. 0.10 M NH4CH3COO
Explanation:
This is based on common ion effect.
According to common ion effect, the solubility of a sparingly soluble salt decreases in a solution containing common ion to it.
The solubility of AgCl(s) is shown below:
[tex]AgCl(s) <=> Ag^{+}(aq)+Cl^-(aq)[/tex]
So, when it is placed in:
a. 0.10 M AgNO3
Due to common ion effect Ag+, its solubility is less in this solution than in pure water.
b. 0.10 M NaCI :
Due to common ion effect Cl-, its solubility is less in this solution than in pure water.
c. 0.10 M KNO3 :
In this solution there is no presence of common ion.
So, the solubility of AgCl in this solution is similar to that of pure water.
d. 0.10 M NH4CH3COO:
In this solution, AgCl forms a precipitate.
So, the solubility of AgCl is more in this solution compared to pure water.
Sound waves travel the same speed through all mediums (solids, liqiuds, and gases).
A
True
B
False
At 1630 hours you started an IV with 500 cc of D5W running at 60 gtt/min using microdrip
tubing (60 gtt/ce). You now receive an BAXTER IV Pump.
A)How many cc/hr should you set the pump for to keep the IV going at the same rate?
Answer:._ml/h
1. B) What time will the infusion be completed?
ions
Answer:
Answer:
0050 hours
Explanation:
The size of the drops is regulated by types of tubing in microdrip tubing 1cc(1ml ) forms 60 gtt.
Gtt in 500 cc D5W is 500×60 gtt.= 30000 gtt.
Time required to infuse whole fluid with the rate of 60gtt /min = 30000gtt÷60gtt/min = 500minute.
= 8hours 20 minute.
Fluid infusion started at 1630 hours after and it ends after 8 hours 30 minutes .
Therefore, infusion will be completed at 1630 hours +0830 hours.= 0050 hours.
The cell potential of the following electrochemical cell depends on the pH of the solution in the anode half-cell:Pt(s)|H2(g, 1atm)|H+(aq, ?M)||Cu2+(aq,1.0M)|Cu(s)What is the pH of the solution if Ecell = 355 mV?
Answer:
0.51
Explanation:
Given the Nernst equation;
E= E° - 0.0592/n logQ
E= 355 mV or 0.355 V
E° = 0.34 - 0= 0.34 V
n= 2(two electrons were transferred in the process)
Equation of the reaction;
H2(g) + Cu^2+(aq) -----> 2H^+(aq) + Cu(s)
Substituting values;
0.355 = 0.34 - 0.0592/2 log([H^+]/1)
0.355 - 0.34 = - 0.0296 log [H^+]
0.015/-0.0296 = log [H^+]
Antilog (-0.5068) = [H^+]
[H^+] = 0.311 M
pH = -log[H^+]
pH= - log(0.311 M)
pH = 0.51
The potential difference between the half cell of the electrochemical cell is called cell potential. The pH of the solution at 355 mV will be 0.51.
What is an electrochemical cell?An electrochemical cell generates electricity from the redox chemical reactions occurring inside the cell.
The balanced chemical reaction is shown as,
[tex]\rm H_{2}(g) + Cu^{2+}(aq) \rightarrow 2H^{+}(aq) + Cu(s)[/tex]
Using the Nernst equation:
[tex]\rm E= E^{\circ} - \dfrac{0.0592}{n }logQ[/tex]
Given,
E = 0.355 V
E° = 0.34 V
n = 2
Substituting values in the above equation:
[tex]\begin{aligned} 0.355 &= 0.34 - \dfrac{0.0592}{2} \;\rm log(\dfrac{[H^{+}]}{1})\\\\0.355 - 0.34 &= - 0.0296 \rm \; log [H^{+}]\\\\\dfrac{0.015}{-0.0296} &= \rm \; log [H^{+}]\end{aligned}[/tex]
Solving further,
[tex]\begin{aligned} \rm Antilog (-0.5068)& = \rm [H^{+}]\\\\\rm [H^{+}] &= 0.311 \;\rm M \end{aligned}[/tex]
The pH of the solution is calculated as:
[tex]\begin{aligned} \rm pH &= \rm -log[H^{+}]\\\\&= \rm - log(0.311\; M)\\\\&= 0.51\end{aligned}[/tex]
Therefore, 0.51 is the pH of the solution.
Learn more about pH here:
https://brainly.com/question/9207631
For the neutralization reaction between pyridine and propanoic acid, draw curved arrows to indicate the direction of electron flow. Draw curved arrows to show the movement of electrons in this step of the mechanism.
Answer:
For the neutralization reaction between pyridine and propanoic acid, draw curved arrows to indicate the direction of electron flow.
Draw curved arrows to show the movement of electrons in this step of the mechanism.
Explanation:
According to Bronsted acid-base theory, an acid is a substance which is a proton donor.
Base is the proton acceptor.
In the given example, acid is propanoic acid and it loses the proton.
Pyridine is the base and it accepts the proton from propanoic acid.
The entire reaction is shown below:
Write a complete list of steps you will utilize to predict the electron-domain geometry for a given species using only the Lewis structure. The only information you are provided with is the molecular formula and the net charge.
Answer:
See explanation
Explanation:
According to the valence shell electron pair repulsion theory, the shape of a molecule depends on the number of electron pairs on the valence shell of the central atom in the molecule.
So, in order to identify the electron domain geometry of a molecule (number of regions of electron density)
1) draw the full Lewis structure of the molecule/ion
2) indicate the electron pairs surrounding the central atom
3) count the number of electron pairs surrounding the central atom
4) decide on the electron pair geometry using valence shell electron pair repulsion theory.
In this exercise we have to use our knowledge of electrons to describe our molecular formula, so we have to:
The valence shell is the outermost shell that an atom can present, that is, it is the shell furthest from the nucleus of an atom.
What is the constitution of electrons?Electrons are negatively charged particles that revolve around the atomic nucleus and have a mass 1836 times less than that of protons and neutrons. Electrons are particles that are part of the constitution of the atom.
See more about electrons at brainly.com/question/1255220
.................. are microorganism used to improve soil fertility.
plz ams it correct
Answer:
Some bacteria like rhizobium and blue green algae are able to fix nitrogen gas from the atmosphere to enrich the soil with nitrogen compounds and increase its fertility. The nitrogen-fixing bacteria and blue green algae are called biological nitrogen fixers.
Answer:
Diazotrophic bacteria or Cyanobacteria
A mixture of coarse sand and sugar is 45.0 percent sand by mass. 120.0 grams (g) of the mixture is placed in a fine-mesh cloth bag and dunked repeatedly in Lake Michigan. After drying, the mass of the contents of the bag equals: ________.
A. 66.0 g
B. 120.0 g
C. 65.0 g
D. 72.00 g
E. 54.0 g
Answer:
Option E
Explanation:
From the question we are told that:
Amount of sand in percentage [tex]s_p=45%[/tex]
Sample size[tex]n=120g[/tex]
Note:After being dumped in the river repeatedly the sugar melts away leaving behind the insoluble sand
Generally the equation for Amount of sand content is mathematically given by
[tex]X=n*s_p[/tex]
[tex]X=120*\frac{45}{100}[/tex]
[tex]X=54g[/tex]
Therefore
After drying, the mass of the contents of the bag equals
[tex]X=54g[/tex]
Option E
5. What, if anything, is wrong with the nuclear equation shown below?
O
179
179 W
+
e
Re
-1
75
74
O A. The daughter product has the wrong atomic number.
O B. The daughter product has the wrong mass number
O c. The particle labeled 'e should have an mass number of 1.
O D. There is nothing wrong with the equation.
Answer:
It is A, The daughter product has the wrong atomic number
Explanation:
Have trust, please i beg of you.
:) thank me later, love ya
The daughter's product has the wrong atomic number. Hence, option A is correct.
What is the nuclear equation?Nuclear equations represent the reactants and products in radioactive decay, nuclear fission, or nuclear fusion.
Beta decay - A common mode of radioactive decay in which a nucleus emits beta particles. The daughter nucleus will have a higher atomic number than the original nucleus.
Hence, the daughter's product has the wrong atomic number.
Learn more about nuclear equation here:
https://brainly.com/question/20660529
#SPJ2
Use the Conductivity interactive to identify each aqueous solution as a strong electrolyte, weak electrolyte, or nonelectrolyte. You are currently in a sorting module. Turn off browse mode or quick nav, Tab to items, Space or Enter to pick up, Tab to move, Space or Enter to drop.
Strong electrolyte Weak electrolyte Nonelectrolyte
NH3 NaCl HCI NaOH C12H22O
Explanation:
strong electrolyte- Nacl HCL NAOH
weak electrolyte- c12H22O, NH3
NaCl,HCl and NaOH are strong electrolytes while ammonia is a weak electrolyte and sucrose is a non-electrolyte.
What are electrolytes?It is a solution which consists of ions which are electrically conducting as a result of movement of ions.Class of electrolytes include most soluble salts,acids and bases which are dissolved in a polar solvent.On dissolution, they separate into the constituent ions.
There are 3 classes according to the nature of substance which results upon dissolution:
1) Strong electrolytes- Substances which on dissolution in a medium dissociate completely are strong electrolytes. eg: NaCl,HCl
2) Weak electrolytes- Substances which on dissolution in a medium dissociate partially are weak electrolytes. eg: NH₃
3)Non-electrolytes- Substances which do not dissociate on dissolution are non-electrolytes. eg: sucrose
Learn more about electrolytes,here:
https://brainly.com/question/8889716
#SPJ2