3) A woman wearing high heels will find difficult to walk on the sandy beach than if she wears flat sole sandals. Why?
4) The rear wheels of a tractor are very wide. Why?
5) Foundation of tall buildings are kept wide and broad. Why?​

Answer:

Option (a) is correct.

Explanation:

The electric charge is the inherent property of matter which appears due to the deficiency of charge or the excess number of electrons.

There are two types of charges, positive and negative.

When an object has deficiency of charge it becomes positive charge and when it gains some electrons, it becomes negative charge.

When the charge is in motion, it is called electric current and when the charge is at rest, it is called static current.

A charge at rest contributes the electric field only while the charge is in motion contributes the electric and magnetic field both.

Answer:

2.8 hours

Explanation:

98 ÷ 35 = 2.8

Answer: The HUMAN EYE

Explanation:

The human eye is made up of different parts which ranges from controlling the amount of light that enters the eye to the focusing of the image that is formed. The camera is a device which is both mechanically and electronically operated which shares a number of similarities with the eye.

In the human eye, the IRIS helps to regulate the amount of rays passing through the pupil to the lens by either contracting or dilating in light or dark environment respectively. While in the camera, the DIAPHRAGM controls the amount of light entering the camera.

The PUPIL serves as the passage for light into the eye while in the camera, the APERTURE does the same.

The photosensitive surface in the eye is the YELLOW SPOT while in the camera, the photosensitive surface is the PHOTOGRAPHIC FILM.

Answer:

Explanation:

The equation for work is

W = FΔx

We are looking for work, so that means we have to be able to fill in the Force and the displacement. We have Force, but we don't have displacement. But the thing we need to do first is change the 45 minutes to seconds because the velocity is in m/s, not m/min.

45 minutes is 2700 seconds.

That means that  the displacement is

Δx = (.90)(2700) so

Δx = 2430 m

Now we plug that in to find work, along with the given Force:

W = 40(2430) so

W = 97200 J (and that is not the correct number of sig fig's but I have a feeling you're not too into that in class, because if you were, the 40 N would be expressed as 40.0 or 4.0 × 10¹)

Answer:

Explanation:

Definitely NOT! Mass is unchanging, wherever you go. On the moon you will have the same mass as you will on the earth. Mass is just a measure of the matter that makes up a body. Weight, however, is dependent upon the pull of gravity which is different on earth than it is on the the moon, for example.

Mass doesn't change with proximity whereas weight can.

Answer: No

Explanation: The terms'mass' and 'weight' are frequently used interchangeably, yet they have distinct meanings. Your mass remains constant regardless of where you are in the universe; nevertheless, your weight varies. The mass of anything is a measure of how much power is required to change its course.

Answer:

In coin card experiment smooth card is used so that the card can slide easily from glass

Answer:

80%

Explanation:

Energy Input: 360 J

Energy Output: 288 J

e= 288/360 × 100

e= 80%

Alternatively,

e= W(total)/ Q (in)

e= 288/360

e=0.8×100

e=80%

Answer:

a) 98.1 Joules

b) 49.05 N × sin(θ)

c) 9.81 × sin(θ)

d) The velocity of the block at the bottom of the plane, v is approximately 6.264 m/s

e) 98.1 Joules

Explanation:

The given parameters of the block are;

The mass of the block, m = 5.0 kg

The distance down the plane the block slides, h = 2.0 m

The friction between the block and the surface = 0

Let θ represent the angle of inclination oof the plane

a) The gravitational potential energy, P.E. = m·g·h

Where;

g = The acceleration due to gravity ≈ 9.81 m/s²

∴ P.E. ≈ 5.0 kg × 9.81 m/s² × 2.0 m = 98.1 Joules

The gravitational potential energy, P.E. ≈ 98.1 Joules

b) The component of the weight of the block parallel to the plane, [tex]w_{\parallel}[/tex], is given as follows;

[tex]w_{\parallel}[/tex] = w × sin(θ) = m·g·sin(θ)

∴ [tex]w_{\parallel}[/tex] ≈ 5.0 kg × 9.81 m/s² × sin(θ) = 49.05 × sin(θ) N

The component of the weight of the block parallel to the plane, [tex]w_{\parallel}[/tex] ≈ 49.05 N × sin(θ)

c) The component of the weight along the inclined plane = The force with which the block moves along the inclined plane, therefore;

[tex]w_{\parallel}[/tex] = m·g·sin(θ) = m·a

Where a represents the acceleration of the block along the plane

Therefore, by comparison, we have;

g·sin(θ) = a

∴ a ≈ 9.81 × sin(θ)

d) Given that the motion of the block is 2.0 m downwards, we have;

The velocity of the block at the bottom of the plane, v² = 2·g·h

Therefore, v² ≈ 2 × 9.81 m/s²× 2.0 m = 39.24 m²/s²

v = √(39.24 m²/s²) ≈ 6.264 m/s

e) The kinetic energy at the bottom of the plane, K.E. = (1/2)·m·v²

∴ K.E. = (1/2) × 5.0 kg × 39.24 m²/s² = 98.1 J

Answer:

The entire rainbow of radiation observable to the human eye only makes up a tiny portion of the electromagnetic spectrum – about 0.0035 percent. This range of wavelengths is known as visible light.

Explanation:

Please Mark me brainliest

Answer:

What languages do i sqeak?

English, Korean and Filipino

Uhh why are you asking it?

Answer:

the component of light reflected by that object

Explanation:

Answer:

PE = 3.92x10^16J

potential energy

Explanation:

PE = m*g*h

mass of water = 1000kg/m³

(4*10^10m³)*1000kg = 4*10^13kg

PE = (4*10^13kg)*(9.81m/s²)*(100m)

PE = 3.92x10^16J

Answer:

The time in which the pendulum does a complete revolution is called the period of the pendulum.

Remember that the period of a pendulum is written as:

T = 2*pi*√(L/g)

where:

L = length of the pendulum

pi = 3.14

g = 9.8 m/s^2

Here we know that  L = 14.4m

Then the period of the pendulum will be:

T = 2*3.14*√(14.4m/9.8m/s^2) = 7.61s

So one complete oscillation takes 7.61 seconds.

We know that the pendulum starts moving at 8:00 am

We want to know 12:00 noon, which is four hours after the pendulum starts moving.

So, we want to know how many complete oscillations happen in a timelapse of 4 hours.

Each oscillation takes 7.61 seconds.

The total number of oscillations will be the quotient between the total time (4 hours) and the period.

First we need to write both of these in the same units, we know that 1 hour = 3600 seconds

then:

4 hours = 4*(3600 seconds) = 14,400 s

The total number of oscillations in that time frame is:

N = 14,400s/7.61s = 1,892.25

Rounding to the next whole number, we have:

N = 1,892

The pendulum does 1,892 oscillations between 8:00 am and 12:00 noon.

Answer:

35.4 cm

Explanation:

We have that when the level of mercury on either limb is the same, the pressure of the trapped air, P₁ = Atmospheric pressure

Also the initial height of the mercury in the tube = The reading of the barometer = 75.0 cm

The initial length of the air column, l₁ = 6.3 cm

The final length of the air column, l₂ = 4.2 cm (The length is expected to decrease due to compression)

The volume, V = l × A

Where;

A = The cross sectional area of the tube

Therefore, the volume of the air column is directly proportional to the length of the air column

∴ V ∝ l

According to Boyles law, we have;

P₁·V₁ = P₂·V₂

Where;

P₁ = The initial pressure in the air column before more mercury is added

V₁ = The initial volume occupied by the air in the air column

P₂, and V₂ are the final pressure and volume of the air column respectively

Given that V = l·A, we can write;

P₁·l₁·A = P₂·l₂·A

P₂ = P₁·l₁·A/(l₂·A) = P₁·l₁/(l₂) = P₁ × 6.3/4.2 = 1.5·P₁

The pressure in the air column after more mercury is added, P₂ = 1.5 × P₁

P₁ = Atmospheric pressure, therefore;

The pressure in the air column after more mercury is added, P₂ = 1.5 × Atmospheric pressure

Pressure = h·ρ·g

Where;

ρ = The density of the substance

g = The acceleration due to gravity

h = The height of the column of the fluid

Given that the density and the gravitational force, can be taken as constant, we have that the pressure of the fluid is directly proportional to the height of the fluid column

Therefore, when the pressure doubles, the height of the fluid column doubles, and when the factor of increase is 1.5, we have;

The final level of the mercury, h₂ = 1.5·h₁ = 1.5×75 cm = 112.5 cm

The initial length of the closed end of the J tube, [tex]h_{closed1}[/tex] = 6.3 cm + 75 cm = 81.3 cm

The final length of the mercury in the closed end, [tex]h_{closed2}[/tex] = 81.3 cm - 4.2 cm = 77.1 cm

The difference in the level of mercury, Δh = h₂ - [tex]h_{closed2}[/tex]

∴ Δh = 112.5 cm - 77.1 cm = 35.4 cm

The difference in the levels of mercury in the limbs, Δh = 35.4 cm

Answer:

A vector can be written as:

(R, θ)

Where R is the magnitude, in this case, we know that the magnitude of the displacement is 5m

Then:

R = 5m

and θ defines the direction, it's an angle measured from the positive x-axis.

(In the image, θ would be the angle located at the point A)

Now, if you look at the image, you can see a triangle rectangle.

Where the adjacent cathetus has a length of 4,

the opposite cathetus has a length of 3 units

the hypotenuse has a length of 5 units.

So we can use any trigonometric rule to find the value of θ, like:

sin(θ) = (opposite cathetus)/hypotenuse

Then:

sin(θ) = 3m/5m

Now we can use the inverse sin function, Asin(x), in both sides

Asin( sin(θ)) = θ = Asin( 3/5) = 36.87°

then the vector is:

(5m, 36.87°)

Now, if we define the positive y-axis as the North, and the positive x-axis as the East.

This vector would point at 36.87° North of East.

(or almost Northeast)

Answer:

Only (I) is true

i) Mass is conserved during a chemical reaction.

Answer:

4p

Explanation:

If you halve the volume the pressure will double as they are inversely proportional. If you double the temperature the particles have double the kinetic energy so the pressure will double again.

So:

p×2×2 = 4p

Answer:

P V = n R T

P2 V2 / (P1 V1) = T2 / T1

P2 = (T2 / T1) (V1 / V2)  P1   =   2 * 2 = 4

Answer:

The dark lines in absorption spectrum of light is due capacity of atoms to absorb light of a specific energy. The absorption of light by atoms occurs when the atom transitions from a lower energy or ground state to an excited high energy state, and it appears in the emission spectrum of the element as dark lines located in the same position as the bright lines

Explanation:

Answer:

a. Potential energy is highest at Part A

The kinetic energy is highest at Part C and Part D

b. The potential energy is lowest at Part C and Part D

c. The roller coater has equal amount of potential and kinetic energy at Part B, Part D and part F

2) Yes, the mechanical energy is the same from point A to F according to the first law of thermodynamics

Explanation:

The total mechanical energy is constant where the roller coaster moves by only the initial velocity, and the the force of gravity

Total mechanical energy, M.E. = Kinetic energy, K.E. + Potential energy, P.E.

M.E. = K.E. + P.E. = Constant

Therefore, we have;

a. Potential energy is the energy stored in a body, due to its position or elevation, state or arrangement

The higher the elevation, the higher the potential energy, therefore, the highest amount of potential energy is gained when the roller coaster is at the  highest point in the motion = Part A

From M.E. = K.E. + P.E. = Constant, the highest kinetic energy is given at the point the roller coaster has the lowest potential energy, which corresponds with the lowest points = Part C and Part D

b. Potential energy, which is the energy of body due to its position or state is lowest at the lowest points = Part C and Part D

c. The value of potential energy, P.E. due to elevation, can be found as follows

P.E. = Mas, m × Gravity, g × Height, h

Therefore, the potential energy will be half the maximum value where the height, h = (Maximum height)/2 and given that M.E. = K.E. + P.E., the kinetic energy, will increase by the same amount, and we have;

K.E. = P.E. at the half the maximum height of the track = Part B, Part D and part F

2) The mechanical energy is the input energy, which according to the first law of thermodynamics cannot be created and destroyed an it is therefore, constant and it is the same from point A to F

Answer:

it's a rule like water !!!!

Explanation:

Most importantly, time appears to run forward always never backwards. in other words there's perceived arrow of time and there's thermodynamic arrow of time, and they always point in a forward direction

for every system there are more states that seem chaotic then states that seem ordered.

the arrow of time seems to have something to do with that tendency. but to get from one instance to another where things get more entropy, we already need some kind of time, gotta admit that.

some (physicists) believe that time is an illusion, that the whole universe is already set in stone, like a block (the idea is therefore called block universe). from the perspective of a godlike outside observer the universe would be like a book, or a 4D movie. the characters might feel a movement of things in a direction, but rewinding it wouldn't feel different in any instance because the order in wich things happen is already written.

a different idea is that there are infinite many different futures and the further they are away, the less we can know for sure about them in a physical way. and this might also be work for the past, so that different parts could lead to one present.

when macroscopic information is deleted, it might not be reversible, so the past gets ultimately blurry. one example for deletion of macroscopic information this is the Library of Alexandria wich burned down.

all the quantum information is still conserved, but the order of things (like letters on pages) is lost and could have been in different configurations before. we can't ultimately not even see the past, as much as we would try.

personally the idea that the past is written in stone but the future is in flux doesn't make any sense for me. because than I could have free will now, but not from the perspective 10 days later.

the present would be a very special thing than, the stage where the universe likes to play.

maybe we can get a grasp on time if we look at it like rules for a game, like a cardboard game.

To get from one configuration to the next ,we must follow rules. like throwing dice and moving in monopoly.

gravity would be a simple real world example for such a rule, a natural law.

But no one would have a firm clue where this rules came from.

TLDR: I don't know and neither does anyone else for sure, not even top notch scientists.

the hardest questions are easy to formulate, but maybe even impossible for us to answer in a satisfying way. I hope we will understand those hard questions better one day, and maybe even get answers.

The difference b/w the displacement and total distance traveled is 4km.

Explanation.

▪ total distance - displacement

= 17 km - 13 km

= 4 km...answer

Answer:

0.4

Explanation:

A concave lens is a diverging lens, so it will always have a negative focal length. Image distance is always negative for a concave lens because it forms virtual images.

From the lens formula;

1/f = 1/u+ 1/v

- 1/2 = 1/3 - 1/v

1/v = 1/3 + 1/2

v= 6/5

v= 1.2 cm

Magnification = image distance/object distance

Magnification = 1.2cm/3cm

Magnification = 0.4

Answer:

[tex]T=7.5*10^{-5}[/tex]

Explanation:

From the question we are told that:

Radius [tex]r=2cm[/tex]

Work done [tex]W=1.5×10^-4 joules[/tex]

Generally the equation for Work done is mathematically given by

 [tex]W=T.dA[/tex]

Therefore

 [tex]T=\frac{W}{dr}[/tex]

 [tex]T=\frac{1.5*10^{-4}}{2}[/tex]

 [tex]T=7.5*10^{-5}[/tex]

Answer:

The linear speed of the car, v, is 24.26 m/s

Explanation:

Given;

radius of the car's tire, r = 0.330 m

angular speed of the car, ω = 11.7 revolutions/s

The angular speed of the car in radian per second:

[tex]\omega = 11.7 \ \frac{rev}{s} \times \frac{2\pi \ rad}{1 \ rev} \\\\\omega = 73.523 \ rad/s[/tex]

The linear speed of the car, v, is calculated as;

v = ωr

v = 73.523 rad/s  x  0.33 m

v = 24.26 m/s

Therefore, the linear speed of the car, v, is 24.26 m/s

Answer:

i didn't understand,

Explanation:

sorry

Answer: Oblique impact

Explanation:

When the motion of one or both of the particles is at an angle to the line of impact, the impact is said to be oblique impact.

On the other hand, when the directions of motion of the two colliding particles are moving along a line of impact, then it's refered to as central impact.

Answer:

6. a. friction between a tire and the road

7. c. energy of motion

8. c. the force with which a moving vehicle hits another object

Explanation:

6. As a car moves along the road, the tires push back against the ground. As tires push back against the ground, the road exerts and opposing force to the motion of the tires. This opposing force is the friction between the tires and the road. This opposing force between the tires and the rad is called traction.

So, the answer is a

7. As an object moves, it has energy. This energy due to its motion is called kinetic energy.

So, the answer is c

8. When a moving vehicle hits another object, it exerts a force on the object. The process of the vehicle hitting the other object is called impact and the force exerted on the object is called the force of impact.

So, the answer is c.

Answer:

True

Explanation:

True, atoms create electromagnetic fields that form repulsion to keep them from touching.

Answer:Yes, A body can have constant speed but still accelerate as in case of uniform circular motion. In uniform circular motion speed remains constant and direction of velocity changes with every point in the direction of tangent drawn from that point.

Explaination:

Was this helpful