3, -3/2, -6, -21/2… what is the explicit function that defines the sequence

The experiences of Cunegonde and the old woman suggest the following about women's experiences during this time period and during times of war: Women were subjugated by men.

Cunegonde and the old woman faced some hardships in the passage that led to the conclusion that women were poor and not treated in a fair manner.

It was this level of poverty that made the old woman advise Cunegonde to marry the governor so that she could secure the life of both her and her son.

Learn more about Cunegonde here:

https://brainly.com/question/24930696

#SPJ4

The general solution of the system of differential equations is given by:

[x1(t); x2(t)] = c1 [2t; t] e^(5t) + c2 [t; t] e^(9t)

where c1 and c2 are constants.

Let's first find the eigenvalues of the coefficient matrix. The characteristic polynomial is given as:

λ^2 - 14λ + 65 = 0

We can factor this as:

(λ - 5)(λ - 9) = 0

So, the eigenvalues are λ = 5 and λ = 9.

Now, let's find the eigenvectors corresponding to each eigenvalue:

For λ = 5:

(A - 5I)x = 0

where A is the coefficient matrix and I is the identity matrix.

Substituting the values, we get:

[3-5 1; 1 -5] [x1; x2] = [0; 0]

Simplifying, we get:

-2x1 + x2 = 0

x1 - 4x2 = 0

Taking x2 = t, we get:

x1 = 2t

So, the eigenvector corresponding to λ = 5 is:

[2t; t]

For λ = 9:

(A - 9I)x = 0

Substituting the values, we get:

[-1 1; 1 -3] [x1; x2] = [0; 0]

Simplifying, we get:

-x1 + x2 = 0

x1 - 3x2 = 0

Taking x2 = t, we get:

x1 = t

So, the eigenvector corresponding to λ = 9 is:

[t; t]

Therefore, the general solution of the system of differential equations is given by:

[x1(t); x2(t)] = c1 [2t; t] e^(5t) + c2 [t; t] e^(9t)

where c1 and c2 are constants.

Learn more about equations here:
https://brainly.com/question/29657983

#SPJ11

[tex]\stackrel{ x-intercept }{(\stackrel{x_1}{9}~,~\stackrel{y_1}{0})}\qquad \stackrel{ y-intercept }{(\stackrel{x_2}{0}~,~\stackrel{y_2}{-9})} ~\hfill \stackrel{slope}{m}\implies \cfrac{\stackrel{\textit{\large rise}} {\stackrel{y_2}{-9}-\stackrel{y1}{0}}}{\underset{\textit{\large run}} {\underset{x_2}{0}-\underset{x_1}{9}}} \implies \cfrac{ -9 }{ -9 } \implies \cfrac{1}{1}\implies 1[/tex]

[tex]\begin{array}{|c|ll} \cline{1-1} \textit{point-slope form}\\ \cline{1-1} \\ y-y_1=m(x-x_1) \\\\ \cline{1-1} \end{array}\implies y-\stackrel{y_1}{0}=\stackrel{m}{ 1}(x-\stackrel{x_1}{9})\implies {\Large \begin{array}{llll} y=x-9 \end{array}}[/tex]

The value of the test statistic, z, is -7.5.

To find the value of the test statistic, z, we can use the following formula:

z = (x - μ) / (σ / √n)

Where:

x = sample mean (84)

μ = population mean under the null hypothesis (90)

σ = population standard deviation

n = sample size (100)

Given that the population standard deviation is not provided, we'll assume it is unknown and use the sample standard deviation as an estimate for the population standard deviation.

Therefore, we'll use the given sample standard deviation of 8 as the estimate for σ.

Substituting the values into the formula, we have:

z = (84 - 90) / (8 / √100)

 = -6 / (8 / 10)

 = -6 / 0.8

 = -7.5

Hence, the value of the test statistic, z, is -7.5.

Learn more about test statistic

brainly.com/question/31746962

#SPJ11

Answer:

V ≈ 56.55 cm³

Step-by-step explanation:

the volume (V) of a cone is calculated as

V = [tex]\frac{1}{3}[/tex] πr²h ( r is the radius and h the height )

here r = 3 and h = 6 , then

V = [tex]\frac{1}{3}[/tex] π × 3² × 6

   = [tex]\frac{1}{3}[/tex] π × 9 × 6

   = [tex]\frac{1}{3}[/tex] π × 54

   = π × 18

   = 18π

   ≈56.55 cm³ ( to the nearest hundredth )

The IRR of the given cash flows is approximately 16.47%.

The internal rate of return (IRR) is the discount rate that makes the net present value (NPV) of the cash flows equal to zero. The NPV of a cash flow is the sum of the present values of all the cash inflows and outflows, discounted at a given interest rate.

To calculate the IRR of the cash flows, we need to find the interest rate that makes the NPV of the cash flows equal to zero. In other words, we need to solve for the interest rate that satisfies the following equation:

NPV = 0 = CF0 + CF1/(1+IRR) + CF2/(1+IRR)^2 + CF3/(1+IRR)^3

where CF0 is the initial investment or cash outflow, and CF1, CF2, and CF3 are the cash inflows in years 1, 2, and 3, respectively.

We can solve for the IRR using a financial calculator or a spreadsheet program like Microsoft Excel. Here is how to do it in Excel:

Enter the cash flows into a column in Excel starting from cell A1. Label column A "Year" and column B "Cash Flow."

Enter the cash flows into column B, starting from cell B2 to B5.

In cell B6, enter the formula "=IRR(B2:B5)" and press Enter.

The IRR function in Excel returns the internal rate of return for a series of cash flows. It uses an iterative technique to find the discount rate that makes the NPV of the cash flows equal to zero. The IRR function takes the cash flows as its argument, in the form of a range or an array, and returns the IRR as a percentage.

In this case, the cash flows are -32,500, 14,300, 17,400, and 11,700, for years 0, 1, 2, and 3, respectively. When we apply the IRR function to these cash flows, we get an IRR of approximately 16.47%.

Therefore, the IRR of the given cash flows is approximately 16.47%.

Learn more about internal rate of return

brainly.com/question/13016230

#SPJ11

Thus, the equation of tangent line to the curve y = 1/(1 + x^2) at the point (-1, 1/2) is y = (1/2)x + 1/2.

To find the equation of the tangent line to the curve y = 1/(1 + x^2) at the point (-1, 1/2).

First, we need to find the derivative of the given curve with respect to x. This will give us the slope of the tangent line at any point on the curve. The derivative of y = 1/(1 + x^2) with respect to x can be calculated using the chain rule:

y'(x) = -2x / (1 + x^2)^2

Now, we need to find the slope of the tangent line at the point (-1, 1/2).

To do this, we can plug x = -1 into the derivative:
y'(-1) = -2(-1) / (1 + (-1)^2)^2 = 2 / (1 + 1)^2 = 2 / 4 = 1/2

So, the slope of the tangent line at the point (-1, 1/2) is 1/2.

Now that we have the slope, we can use the point-slope form of a line to find the equation of the tangent line:
y - y1 = m(x - x1)

Here, m is the slope, and (x1, y1) is the point (-1, 1/2). Plugging in the values, we get:
y - (1/2) = (1/2)(x - (-1))

Simplifying the equation, we get:
y = (1/2)x + 1/2

So, the equation of the tangent line to the curve y = 1/(1 + x^2) at the point (-1, 1/2) is y = (1/2)x + 1/2.

Know more about the equation of tangent line

https://brainly.com/question/30162650

#SPJ11

To solve the system Rx = у, where R is an nxn upper triangular matrix with semi-band width s, we can use the back-substitution method, which involves solving for x in the equation R*x = y.

The back-substitution algorithm starts with the last row of the matrix R and solves for the last variable x_n, using the corresponding entry in y and the entries in the last row of R.

Then, it moves on to the second-to-last row of R and solves for the variable x_{n-1} using the entries in the second-to-last row of R, the known values of x_{n}, and the corresponding entry in y. The algorithm continues in this way, moving up the rows of R, until it solves for x_1 using the entries in the first row of R and the known values of x_2 through x_n.

Since R is an upper triangular matrix with semi-band width s, the non-zero entries are confined to the upper-right triangle of the matrix, up to s rows above the diagonal.

This means that in each row of the back-substitution algorithm, we only need to consider at most s+1 entries in R and the corresponding entries in y. Furthermore, since the matrix R is triangular, the entries below the diagonal are zero, which reduces the number of operations needed to solve for each variable.

Thus, in each row of the back-substitution algorithm, we need to perform at most s+1 multiplications and s additions to solve for a single variable. Since there are n variables to solve for, the total number of operations required by the back-substitution algorithm is approximately 2ns flops.

An analogous result holds for lower-triangular systems, where the entries are confined to the lower-left triangle of the matrix. In this case, we use forward-substitution instead of back-substitution to solve for the variables, starting from the first row of the matrix and moving down. The number of operations required is again approximately 2ns flops.

To know more about matrix refer here:

https://brainly.com/question/14412897

#SPJ11

In the problem given, it is given that Three percent of Jennie's skin cells were burned when she escaped from a fire. If 3.9 x 10^10 of her skin cells were burned then, how many skin cells were not burned?To solve the problem, let's assume that Jennie had a total of x skin cells, out of which 3% were burned.

It is given that 3% of her skin cells were burned, and 3.9 x 10^10 skin cells were burned. So, we can write this information as:

3% of x = 3.9 x 10^10

The first step is to convert 3% to a decimal.

We can do this by dividing

3 by 100.3 ÷ 100 = 0.03

Now, we can rewrite the equation as:

[tex]0.03x = 3.9 x 10^10[/tex]

To find the value of x,

we need to divide both sides by 0.03:

[tex]x = (3.9 x 10^10) ÷ 0.03x = 1.3 x 10^12[/tex]

So, Jennie had a total of 1.3 x 10^12 skin cells.

Now, we can find the number of skin cells that were not burned.

If 3.9 x 10^10 skin cells were burned, then the number of skin cells that were not burned is:

[tex]x - 3.9 x 10^10= 1.3 x 10^12 - 3.9 x 10^10= 1.26 x 10^12[/tex]

Therefore, the number of skin cells that were not burned is 1.26 x 10^12.

To know more about divide, visit:

https://brainly.com/question/15381501

#SPJ11

The conversion of a unary one-to-one relationship, a unary one-to-many relationship, and a unary many-to-many relationship into relational tables have in common the creation of a separate table to represent the relationship.

This table will have a foreign key referencing the primary key of the entity involved in the relationship.

In each case, the entity is represented by a single table with one or more attributes, and the relationship between the entity and itself is represented by one or more columns in that table. The differences between these types of relationships lie in the cardinality of the relationship and how it is represented in the table structure.

For a unary one-to-one relationship, the entity table will have a foreign key column that references itself, which enforces the one-to-one relationship between two instances of the same entity.

For a unary one-to-many relationship, the entity table will have a foreign key column that references itself, but multiple instances of the same entity can reference a single instance of the same entity.

For a unary many-to-many relationship, the entity table will need to be split into two tables, with a third "junction" table linking them together. The junction table will have two foreign key columns, each referencing the primary key of one of the two entity tables, to represent the many-to-many relationship between instances of the same entity.

So, the commonality is that a single entity table is required to represent the entity in each case, with the differences in the relationship cardinality and structure determining how the entity table is designed and linked to itself.

To know more about unary conversion , refer here :

https://brainly.com/question/31563936#

#SPJ11

The rational zero of the function f(x)=2x^3+15x^2−4x+32 is -8.

To find a rational zero of the function f(x) = 2x^3 + 15x^2 - 4x + 32 using the Rational Zero Theorem, follow these steps:

1. Identify the coefficients of the polynomial. In this case, they are 2, 15, -4, and 32.

2. List all the factors of the constant term (32) and the leading coefficient (2).

Factors of 32: ±1, ±2, ±4, ±8, ±16, ±32
Factors of 2: ±1, ±2

3. Create all possible fractions using factors of the constant term as numerators and factors of the leading coefficient as denominators. These fractions represent the possible rational zeros.

Possible rational zeros: ±1/1, ±2/1, ±4/1, ±8/1, ±16/1, ±32/1, ±1/2, ±2/2, ±4/2, ±8/2, ±16/2, ±32/2

Simplified rational zeros: ±1, ±2, ±4, ±8, ±16, ±32, ±1/2, ±4/2, ±8/2, ±16/2, ±32/2

4. Test each possible rational zero using synthetic division or by plugging the value into the function until you find one that results in f(x) = 0.

After testing the possible rational zeros, you'll find that the rational zero is -8.

To know more about rational zero refer here :

https://brainly.com/question/29410459#

#SPJ11

The measure that would be used to compute the average gender of subjects is the mean. Option a) mean is the correct answer.

The mean is calculated by adding up all of the values in a set of data and dividing by the number of values. In this case, if we assign a value of 0 to represent male and a value of 1 to represent female, we can calculate the mean by adding up all of the values and dividing by the total number of subjects.

However, it is important to note that gender is a binary category and using numerical values to represent it may not be appropriate or respectful. Additionally, the concept of an "average" gender may not be meaningful or relevant in all contexts.

To know more about average gender visit:

https://brainly.com/question/19563123

#SPJ11

The df that will be used if a simple main effect is examined from a-two factor ANOVA with two levels in each factor and n = 4 individuals in each level is 1, 12. So, the correct option is option c. 1,12.

If a simple main effect is examined from a two-factor ANOVA with two levels in each factor and n = 4 individuals in each level, the degrees of freedom (df) that will be used are:

For the main effect of one factor (either Factor A or Factor B), the df will be calculated as follows:

1. Between-group df: number of levels - 1 = 2 - 1 = 1
2. Within-group df: (number of levels * (n - 1)) = 2 * (4 - 1) = 2 * 3 = 6

So, the df for the main effect of one factor is 1 (between-group) and 6 (within-group).

Now, let's calculate the error df for the interaction effect between the two factors:

Error df = (Factor A levels - 1) * (Factor B levels - 1) * n = (2 - 1) * (2 - 1) * 4 = 1 * 1 * 4 = 4

Therefore, df = 1, 12. So, the correct answer is option c. df-1, 12.

Know more about ANOVA here:

https://brainly.com/question/15084465

#SPJ11

a)  a sample size of 751 is needed.

b)  the sample size needed is 769.

a) If no preliminary study is available, the formula used to calculate the sample size is shown below:

n = [(Zc/2)^2 × p(1 − p)] / E^2

Where, n = sample size

Zc/2 = the critical value of the standard normal distribution at the desired level of confidence

p = estimated proportion (50% or 0.5 is used if there is no idea of the proportion of population with the characteristic)

E = margin of error (0.03 in this case)

Substituting the values in the formula, we have:

n = [(2.58)^2 × 0.5(1 − 0.5)] / 0.03^2

= 750.97

Therefore, a sample size of 751 is needed.

b) In a preliminary study, 210 of 350 processed items contained GM products. Using this preliminary study, the estimated proportion of processed food items that contain genetically modified products is

p = 210/350= 0.6

The formula for calculating the sample size is the same as in the first part,n = [(Zc/2)^2 × p(1 − p)] / E^2

Substituting the values in the formula, we have:

n = [(2.58)^2 × 0.6(1 − 0.6)] / 0.03^2

= 768.68

Rounding up, the sample size needed is 769.

To know more about GM products visit:

https://brainly.com/question/32580017

#SPJ11

The estimated value of the first derivative of y = cos(x) at x = 7/4 using Richardson extrapolation with step sizes h1= 7/3 and h2 = 7/6 is approximately -0.861.

Richardson extrapolation is a numerical method for improving the accuracy of numerical approximations of functions.

The method involves using two or more approximations of a function with different step sizes, and combining them in a way that cancels out the leading order error term in the approximation.

In this problem, we are using centered differences of O(ha) to approximate the first derivative of y = cos(x) at x = 7/4. Centered differences of O(ha) are approximations of the form:

y'(x) = (1 / h^a) * sum(i=0 to n) (ai * y(x + i*h))

where ai are constants that depend on the order of the approximation, and h is the step size. For a = 2, the centered difference approximation is:

y'(x) = (-y(x + 2h) + 8y(x + h) - 8y(x - h) + y(x - 2h)) / (12h)

Using this formula with step sizes h1 = 7/3 and h2 = 7/6, we can obtain initial estimates of the first derivative at x = 7/4. These estimates are given by:

y1 = (-cos(7/4 + 27/3) + 8cos(7/4 + 7/3) - 8cos(7/4 - 7/3) + cos(7/4 - 27/3)) / (12 * 7/3)

= -0.864

y2 = (-cos(7/4 + 27/6) + 8cos(7/4 + 7/6) - 8cos(7/4 - 7/6) + cos(7/4 - 27/6)) / (12 * 7/6)

= -0.856

To estimate the first derivative of y = cos(x) at x = 7/4 using Richardson extrapolation, we need to follow these steps:

Use Richardson extrapolation to obtain an improved estimate of the first derivative at x = 7/4. This is given by the formula:

y = (2^a y2 - y1) / (2^a - 1)

where a is the order of the approximation used to calculate y1 and y2. Since we are using centered differences of O(ha), we have:

a = 2

Substituting the values of y1, y2, h1, h2 and a, we get:

y = (2^2 * (-sin(7/4 + 7/6) / (7/6 - 7/12)) - (-sin(7/4 + 7/3) / (7/3 - 7/6))) / (2^2 - 1)

= (-32/3 * sin(25/12) + 3/2 * sin(35/12)) / 5

To improve the accuracy of these estimates, we use Richardson extrapolation with a = 2. This involves

Learn more about  Richardson extrapolation

brainly.com/question/31478450

#SPJ11

there exists an integer solution to the congruence x 2 x ≡ 4 (mod 2027) when 2027 is prime.

we first note that if there is a solution to this congruence, then x must be relatively prime to 2027. This is because if x and 2027 have a common factor, then we can divide both sides of the congruence by that common factor and obtain a new congruence that is equivalent to the original one but with a smaller modulus. Since 2027 is prime, the only divisors of 2027 are 1 and 2027, so any non-zero residue modulo 2027 that is not equal to 1 or 2026 must be relatively prime to 2027.

Now, let's consider the hint given in the question: "what do you have to take the square root of?" The answer is that we need to take the square root of 4 to obtain possible values for x. Since 4 is a perfect square, it has two square roots modulo 2027, namely 2 and 2025. Thus, we have two possible values for x, namely x ≡ 2 (mod 2027) and x ≡ 2025 (mod 2027).

To see that these are indeed solutions to the congruence x 2 x ≡ 4 (mod 2027), we can simply plug them in and check. For example, if we take x ≡ 2 (mod 2027), then we have:

(2 2) 2 ≡ 4 (mod 2027)

which is true since 2 2 = 4. Similarly, if we take x ≡ 2025 (mod 2027), then we have:

(2025 2) 2025 ≡ 4 (mod 2027)

which is also true since 2025 2 ≡ 4 (mod 2027).

Therefore, we have shown that there exist integer solutions to the congruence x 2 x ≡ 4 (mod 2027) when 2027 is prime. In conclusion, the possible solutions are x ≡ 2 (mod 2027) and x ≡ 2025 (mod 2027).

To learn more about congruence visit:

https://brainly.com/question/10677854

#SPJ11

Since 2027 is a prime number, it follows from the Chinese Remainder Theorem that these two solutions are distinct . Thus, there exists an integer solution to the congruence x^2 ≡ 4 (mod 2027).

To show that there exists an integer solution to the congruence x^2 ≡ 4 (mod 2027), we need to find an integer x that satisfies this congruence.

First, note that 2027 is a prime number. Since 4 is a quadratic residue mod 2027 (i.e., there exists an integer y such that y^2 ≡ 4 (mod 2027)), we can use the fact that 2027 is prime and apply the following theorem:

If p is an odd prime and a is a quadratic residue mod p, then the congruence x^2 ≡ a (mod p) has either 2 solutions or no solutions.

Using this theorem, we know that the congruence x^2 ≡ 4 (mod 2027) has either 2 solutions or no solutions.

To find a solution, we can take the square root of both sides of the congruence:
x^2 ≡ 4 (mod 2027)
x ≡ ±2 (mod 2027)

So x ≡ 2 (mod 2027) or x ≡ -2 (mod 2027).

Since 2027 is a prime number, it follows from the Chinese Remainder Theorem that these two solutions are distinct (i.e., they are not equivalent mod 2027). Therefore, there exists an integer solution to the congruence x^2 ≡ 4 (mod 2027).

Know more about the Chinese Remainder Theorem

https://brainly.com/question/30806123

#SPJ11

The sum of the functions, we simplify the expression to (f+g)(5) = 27.

The expression (f+g)(5) represents the sum of the functions f(x) and g(x) evaluated at x = 5. To calculate it, we first need to find f(x) and g(x), and then substitute x = 5 into the sum of these functions.

Given f(x) = x + 3 and g(x) = x^2 - x, we can find (f+g)(x) by adding the two functions:

(f+g)(x) = f(x) + g(x) = (x + 3) + (x^2 - x) = x^2 + 2

Now we can evaluate (f+g)(5) by substituting x = 5 into the expression:

(f+g)(5) = (5)^2 + 2 = 25 + 2 = 27

Therefore, (f+g)(5) is equal to 27.

In summary, the expression (f+g)(5) represents the sum of the functions f(x) = x + 3 and g(x) = x^2 - x evaluated at x = 5. By substituting x = 5 into the sum of the functions, we simplify the expression to (f+g)(5) = 27.

Learn more about functions here:

https://brainly.com/question/31062578

#SPJ11

The algebraic expression for this can be represented as 60.75m.

Jerry wants to open a bank account with his money. He will deposit $60.75 per month. If m represents the number of months, the algebraic expression that represents the total amount of money he will deposit can be determined by multiplying the amount he deposits per month by the number of months he makes deposits for.To find the total amount of money that Jerry will deposit in his bank account, the amount that he deposits each month should be multiplied by the number of months that he makes deposits for.

Thus, the algebraic expression for this can be represented as follows 60.75m where "m" represents the number of months Jerry makes deposits for, and 60.75 represents the amount Jerry deposits per month.

To know more algebraic expression, click here

https://brainly.com/question/28884894

#SPJ11

There must be some period of three consecutive days during which at least 49 bills were mailed.

Suppose this is not true, that means for any three consecutive days, the number of bills mailed is less than 49. Then, the maximum number of bills that can be mailed in 11 days is $11\times48=528$.

However, we know that 195 bills were mailed in 12 days, so the average number of bills mailed per day is $195/12>16$. This means that there must be at least one day during which more than 48 bills were mailed (since $16\times3=48$).

But this contradicts our assumption that no three consecutive days had more than 48 bills mailed. Therefore, our initial assumption is false and there must be some period of three consecutive days during which at least 49 bills were mailed.

To know more about bills calculations refer here:

https://brainly.com/question/31514164

#SPJ11

The component form of vector a is (-3.69, 4.40).

To find the component form, we can use the following formulas:

x = r * cos(θ)

y = r * sin(θ)

where r is the magnitude of the vector and θ is the direction of the vector.

In this case, we have:

r = √33

θ = 130°

Substituting these values into the formulas above, we get:

x = √33 * cos(130°) = -3.69

y = √33 * sin(130°) = 4.40

Therefore, the component form of vector a is (-3.69, 4.40).

Learn more about vector on

https://brainly.com/question/25705666

#SPJ1

The test statistic (6.01) is lesser than the critical value (2.167), we reject the null  thesis. Therefore, there's sufficient  substantiation to support the claim that the recent  friction for the number of mountain rambler deaths is  lower than 136.2.

To find a 90 confidence interval for the population  friction, we can use the  ki-square distribution with 7 degrees of freedom. thus, we can say with 90 confidence that the population  friction lies within the interval(3.325,14.067).    

To test the claim that the recent  friction for the number of mountain rambler deaths is  lower than136.2, we can conduct a one-  tagged  thesis test using the  ki-square distribution. The null and indispensable  suppositions are as follows  Null  thesis( H ₀) The recent  friction is equal to or lesser than136.2( σ ² ≥136.2).

Indispensable  thesis( H ₁) The recent  friction is  lower than136.2( σ ²<136.2).  

Using the given information, we can calculate the test statistic as  Test Statistic =

(( n- 1) * s ²) σ ²  

where n is the sample size( 8) and s ² is the recent  friction(115.1).  Calculating the test statistic yields  Test Statistic

= (( 8- 1) *115.1)/136.2 ≈6.01  

With a significance  position of 1 and 7 degrees of freedom( n- 1), the critical  ki-square value is  roughly2.167.

For such more questions on critical value :

https://brainly.com/question/15970126

#SPJ11

a) We can now apply Cardano's formula to find one of the roots:

[tex]x = \cuberoot(18 + \sqrt{(325)} ) + \cuberoot(18 - \sqrt{(325)} )[/tex]

b) Since [tex]x^3 + 3x - 36 = 36[/tex], we have verified that x = 3√√325 + 18 – √√325 – 18 is a root of the equation [tex]x^3 + 3x = 36.[/tex]

c) The three roots of the equation [tex]x^3 + 3x = 36[/tex] are:

x = 3, (-3 + 3i)/2, (-3 - 3i)/2

(a) Cardano's formula for solving a cubic equation of the form[tex]x^3 + px = q[/tex]is:

[tex]x = \cuberoot (q/2 + \sqrt{ ((q/2)^2 - (p/3)^3))} + \cuberoot(q/2 - \sqrt{((q/2)^2 - (p/3)^3))}[/tex]

In this case, p = 3 and q = 36, and we know that x = 3 is a root. We can factor the equation as:

[tex]x^3 + 3x - 36 = (x - 3)(x^2 + 3x + 12) = 0[/tex]

The quadratic factor has no real roots, so the other two roots must be complex conjugates of each other. Let's call them α and β. We have:

α + β = -3

αβ = 12

Using Vieta's formulas, we can express α and β in terms of the roots of a quadratic equation:

[tex]t^2 + 3t + 12 = 0[/tex]

The roots of this quadratic equation are:

[tex]t = (-3 + \sqrt{(-3^2 - 4112)} )/2 = (-3 + 3i)/2[/tex]

Therefore, we have:

α = (-3 + 3i)/2 and β = (-3 - 3i)/2

(b) Bombelli's method for verifying a root of a cubic equation is to cube the candidate root and see if it matches the constant term of the equation. In this case, we have:

x = 3√√325 + 18 – √√325 – 18

Cubing this expression, we get:

x^3 = (3√√325 + 18 – √√325 – 18)^3

= 27√√325 + 27(-√√325) + 54(3√√325 - √√325)

= 81√√325

= 81 × 5

= 405

On the other hand, we have:

[tex]x^3 + 3x - 36 = 3^3[/tex] + 3(3√√325 + 18 – √√325 – 18) - 36

= 27√√325 + 9

= 27√√325 + 27(-√√325) + 36

= 36

(c) From the factorization of the equation as [tex](x - 3)(x^2 + 3x + 12) = 0[/tex], we see that the other two roots are the roots of the quadratic equation [tex]x^2 + 3x + 12 = 0[/tex]. Using the quadratic formula, we have:

x = (-3 ± [tex]\sqrt{(3^2 - 4\times 12)} )/2[/tex]

= (-3 ± 3i)/2

for such more question on  Cardano's formula

https://brainly.com/question/1216161

#SPJ11

A 15-kilometer diameter impact crater is a relatively small feature on the Moon's surface. It was likely formed by a small asteroid or meteoroid impact, creating a circular depression.

Impact craters on the Moon are formed when a celestial object, such as an asteroid or meteoroid, collides with its surface. The size and characteristics of a crater depend on various factors, including the size and speed of the impacting object, as well as the geological properties of the Moon's surface. In the case of a 15-kilometer diameter crater, it is considered relatively small compared to larger lunar craters.

When the impacting object strikes the Moon's surface, it releases an immense amount of energy, causing an explosion-like effect. The energy vaporizes the object and excavates a circular depression in the Moon's crust. The crater rim, which rises around the depression, is formed by the ejected material and the displaced lunar surface. Over time, erosion processes and subsequent impacts may alter the appearance of the crater.  

The study of impact craters provides valuable insights into the Moon's geological history and the frequency of impacts in the lunar environment. The size and distribution of craters help scientists understand the age of different lunar surfaces and the intensity of impact events throughout the Moon's history. By analyzing smaller craters like this 15-kilometer diameter one, researchers can further unravel the fascinating story of the Moon's formation and its ongoing relationship with space debris.

Learn more about diameter here:

https://brainly.com/question/31445584

#SPJ11

About 18.62% of the data falls outside of 2.3 standard deviations from the mean.

We are not given the mean or standard deviation of the data set, so we cannot calculate the exact answer.

However, we can use Chebyshev's theorem to find an upper bound on the proportion of data that is more than 2.3 standard deviations away from the mean.

Chebyshev's theorem states that for any data set, regardless of the shape of the distribution, at least[tex]1 - 1/k^2[/tex] of the data will be within k standard deviations of the mean.

In this case, we want to find the proportion of data that is more than 2.3 standard deviations away from the mean.

Using Chebyshev's theorem, we know that at least [tex]1 - 1/2.3^2 = 1 - 0.1862[/tex]= 0.8138, or 81.38%, of the data will be within 2.3 standard deviations of the mean.

Therefore, at most 18.62% of the data can be farther than 2.3 standard deviations from the mean.

Learn more about mean value

brainly.com/question/14882017

#SPJ11

In mathematics, a vector is a mathematical object that represents both magnitude and direction. It is typically represented as an ordered list of values and can be used to describe physical quantities such as force, velocity, and acceleration.

To find the value(s) of lambda such that the vectors v1=(-3,1,-2), v2=(0,1,lambda), and v3=(lambda,0,1) are linearly dependent, we'll use the determinant method. We'll create a matrix with the three vectors as rows and find its determinant. If the determinant is zero, the vectors are linearly dependent.

The matrix is:

| -3  1  -2  |
|  0  1 lambda|
|lambda 0  1  |

Now, let's find the determinant:

(-3) * | 1 lambda|
          | 0  1  |  - (1) * | 0 lambda|
                                  |lambda 1 | + (-2) * | 0  1  |
                                                     |lambda 0|

Calculating the minors:

(-3) * (1) - (1) * (-lambda^2) + (-2) * (-lambda) = -3 + lambda^2 + 2*lambda

Now, we set the determinant equal to zero since we want the vectors to be linearly dependent:

-3 + lambda^2 + 2*lambda = 0

Solving the quadratic equation:

lambda^2 + 2*lambda + 3 = 0

Since this quadratic equation has no real solutions (the discriminant is negative), it means that for any value of lambda, the vectors will always be linearly independent.

So, the correct answer is:
a) These vectors are always linearly independent

To know more about vector visit:

https://brainly.com/question/29740341

#SPJ11

If the dimensions of the globe were reduced by half, the volume of the new globe would be approximately 523.3 cubic inches. A globe company currently manufactures a globe that is 20 inches in diameter.

If the dimensions of the globe were reduced by half, the volume of the new globe would be about 523.3 in3. This is calculated as follows:

First, we calculate the volume of the original globe using the formula for the volume of a sphere, which is:

V = (4/3)πr³, Where V is the volume, π is the value of pi (approximately 3.14), and r is the sphere's radius. Since the diameter of the original globe is 20 inches, its radius is half of that or 10 inches. Plugging this value into the formula, we get:

V = (4/3)π(10)³

V ≈ 4186.7 in³

Next, we calculate the volume of the new globe with a radius of 5 inches, which is half of the original radius. Plugging this value into the formula, we get:

V = (4/3)π(5)³V

≈ 523.3 in³

Therefore, if the dimensions of the globe were reduced by half, the volume of the new globe would be approximately 523.3 cubic inches. The volume of the new globe, when the dimensions of the globe were reduced by half,f is approximately 523.3 cubic inches.

To know more about the sphere, visit,

brainly.com/question/32048555

#SPJ11

Given the stock is purchased for $72.50 and it is expected that each day the stock will decrease by $0.05.

Let x = time (in days) and

P(x) = stock price (in $).

To find how many days it will take for the stock price to be equal to $65, we need to solve for x such that P(x) = 65.So, the equation of the stock price is

: P(x) = 72.50 - 0.05x

We have to solve the equation P(x) = 65. We have;72.50 - 0.05

x = 65

Subtract 72.50 from both sides;-0.05

x = 65 - 72.50

Simplify;-0.05

x = -7.50

Divide by -0.05 on both sides;

X = 150

Therefore, it will take 150 days for the stock price to be equal to $65

To know more about cost estimate visit :-

https://brainly.in/question/40164367

#SPJ11

a) The union of all nonempty bit strings of length not exceeding n (⋃ni=1Ai) is the set of all nonempty bit strings of length 1 to n.

b) The intersection of all nonempty bit strings of length not exceeding n (⋂ni=1Aj) is an empty set, as there are no common bit strings among all Ai sets.

a) To find ⋃ni=1Ai, follow these steps:
1. Start with an empty set.
2. For each i from 1 to n, add all nonempty bit strings of length i to the set.
3. Combine all sets to form the union.


b) To find ⋂ni=1Aj, follow these steps:
1. Start with the first set A1, which contains all nonempty bit strings of length 1.
2. For each set Ai (i from 2 to n), find the common elements between Ai and the previous sets.
3. As there are no common elements among all sets, the intersection is an empty set.

To know more about bit strings click on below link:

https://brainly.com/question/14229889#

#SPJ11

The speed of the first runner is 5 miles per hour, and the speed of the second runner is 1 mile per hour.

Let's assume the speed of the second runner is "x" (in some unit, let's say miles per hour).

According to the given information, the speed of the first runner is 5 times the speed of the second runner. Therefore, the speed of the first runner can be represented as 5x.

After 30 minutes, the first runner would have covered a distance of 5x ×(30/60) = 2.5x miles.

In the same duration, the second runner would have covered a distance of x × (30/60) = 0.5x miles.

Since the runners are 2 miles apart, we can set up the following equation:

2.5x - 0.5x = 2

Simplifying the equation:

2x = 2

Dividing both sides by 2:

x = 1

Therefore, the speed of the second runner is 1 mile per hour.

Using this information, we can determine the speed of the first runner:

Speed of the first runner = 5 × speed of the second runner

= 5 × 1

= 5 miles per hour

So, the speed of the first runner is 5 miles per hour, and the speed of the second runner is 1 mile per hour.

Learn more about equation here:

https://brainly.com/question/29514785

#SPJ11

In order to determine what type of model is being referred to, more context is needed. However, if the model is being used in a scientific or analytical context, it is likely that the model would be either statistical or mathematical.

A statistical model is a mathematical representation of data that describes the relationship between variables. A mathematical model, on the other hand, is a simplified representation of a real-world system or phenomenon, using mathematical equations to describe the relationships between the different components. These types of models are often used in fields such as engineering, physics, and economics, and can be used to make predictions or test hypotheses. In some cases, models may also incorporate simulations or physical components, but this would depend on the specific context and purpose of the model.

To know more about Statistical Model visit:
https://brainly.com/question/31577270
#SPJ11