2H+O2 → 2H₂O
Three grams of hydrogen and 24 grams of oxygen were completely reacted to form
water. Which of the following is the amount of water produced?

The final temperature must be approximately 248 K for the pressure to remain constant. B is correct option.

We can use the combined gas law to solve this problem, which states that: (P1V1)/T1 = (P2V2)/T2

where P1 and V1 are the initial pressure and volume, respectively, T1 is the initial temperature, P2 and V2 are the final pressure and volume, respectively, and T2 is the final temperature.

We know that the initial volume V1 is 0.250 L and the final volume V2 is 0.285 L. The pressure P is constant, so we can set P1 = P2. The initial temperature T1 is 10°C, which is equivalent to 283 K (10°C + 273 = 283 K). Substituting these values into the combined gas law and solving for T2, we get: (P1V1)/T1 = (P2V2)/T2

(P1V1) = (P2V2)(T1/T2)

T2 = (P2V2)(T1)/(P1V1)

T2 = (P1V1)(T2)/(P2V2)

T2 = (283 K × 0.250 L)/(0.285 L)

T2 = 248 K.

For more such questions on temperature

https://brainly.com/question/30982315

#SPJ11

The molecular mass of the gas is 54 g/mol.

The Ideal gas law is the equation of state of a hypothetical ideal gas. It is a good approximation to the behaviour of many gases under many conditions, although it has several limitations. The ideal gas equation can be written as

                                  PV = nRT

where,

P = Pressure

V = Volume

T = Temperature

n = number of moles

In this equation, number of moles can be replaced by mass divided by molecular mass.

Given,

Mass = 0.695g

Volume = 293ml = 0.293L

Pressure = 807.4mmHg = 807.4/760 atm

Temperature = 22⁰C = 22 +273 = 295K

PV = nRT

(807.4 × 0.293) ÷ 760 = (0.695 × 8.314 × 295) ÷ M

M =  (0.695 × 0.0821× 295 ×760) ÷ (807.4 × 0.293)

M= 54 g/ mol

Learn more about Ideal gas Law, here:

https://brainly.com/question/28257995

#SPJ1

Answer: 4480 mL if need correct sig figs its 4.48 X 10^3 mL

Explanation:

1) solve for moles HCl

2.00 X 0.2 =0.400 moles HCl

2) now do stoichiometry using balanced chemical equation

___Mg + 2 HCl ---> MgCl2 + H2

0.400 moles HCl X (1 mole H2/2 Moles HCl) X (22400ml/ 1mole) =4480 mL H2

The balanced equation for the reaction between sulfur (S₈) and oxygen (O₂) to form sulfur trioxide (SO₃) is 2S₈ + 16O₂ → 16SO₃.

Balancing chemical equations involves the addition of stoichiometric coefficients to the reactants and products.

The balanced equation for the reaction between sulfur (S₈) and oxygen (O₂) to form sulfur trioxide (SO₃) is determined as;

2S₈ + 16O₂ → 16SO₃

From the reactants side we can see that sulfur is 16 and also 16 in the product side. The number of oxygen in the reactant side is 32 and also 32 in the product side.

Thus, the balanced equation for the reaction between sulfur (S₈) and oxygen (O₂) to form sulfur trioxide (SO₃) is 2S₈ + 16O₂ → 16SO₃.

Learn more about balanced chemical equation here: https://brainly.com/question/26694427

#SPJ1

The gas would occupy approximately 3.00 L at 24.0 °C and 670 torr.

To solve this problem, we can use the combined gas law, which relates the pressure, volume, and temperature of a gas at different conditions. The combined gas law is expressed as:

(P1 × V1) / (T1) = (P2 × V2) / (T2)

where P1, V1, and T1 are the initial pressure, volume, and temperature, respectively, and P2, V2, and T2 are the final pressure, volume, and temperature, respectively.

Using the given values, we can plug them into the equation and solve for V2:

(P1 × V1) / (T1) = (P2 × V2) / (T2)

(934 torr × 4.76 L) / (279.25 K) = (670 torr × V2) / (297.15 K)

Simplifying and solving for V2, we get:

V2 = [(934 torr × 4.76 L) / (279.25 K)] × (297.15 K / 670 torr)

V2 ≈ 3.00 L

For more question on gas click on

https://brainly.com/question/25736513

#SPJ11

The velocity of the tomato when it hits the ground is approximately 13.49 meters per second.

The potential energy of the tomato is at the height of 10 meters. When the tomato hits the ground, most of the potential energy is E1 = 0.909*mgh.

By the conservation of energy principle, the kinetic energy [tex]E_1[/tex] is equal to the kinetic energy [tex]E_2[/tex] of the tomato just before it hits the ground.

The kinetic energy [tex]E_2[/tex] is given by[tex]1/2mv^2[/tex], where v is the velocity of the tomato just before it hits the ground. Equating [tex]E_1[/tex] and [tex]E_2[/tex] solving for v, we get:

[tex]v = \sqrt{(20.909gh)[/tex]

Substituting the values of [tex]g = 9.81 m/s^2[/tex]and h = 10 m, we get:

v = [tex]\sqrt{(20.9099.81*10)}[/tex] = 13.49 m/s

To know more about potential energy, here

brainly.com/question/24284560

#SPJ1

--The complete Question is, Suppose a tomato is dropped from a height of 10 meters. If 90.9% of the work done on the tomato is converted to kinetic energy by the time it hits the ground, what is the velocity (in meters per second) of the tomato when it hits the ground? --

Answer:

Br-Ag-Br

Explanation:

The pOH of a solution can be calculated using the formula: pOH = -log[OH-]. To find the [OH-] concentration when the pOH is 7, we need to convert the pOH value to the OH- concentration.

Starting with pOH = 7, we can rearrange the equation to find [OH-]. Taking the antilog of both sides, we get 10^(-pOH) = 10^(-7). This simplifies to [OH-] = 10^(-7) or 0.0000001 M.

Therefore, the [OH-] concentration in the solution with a pOH of 7 is 0.0000001 M or 1 x 10^(-7) M.

It's worth noting that the pOH and pH of a solution are related by the equation: pH + pOH = 14. In this case, if the pOH is 7, the pH of the solution would be 14 - 7 = 7.

For more such questions on solution

https://brainly.com/question/24922804

#SPJ11

Personality is the reflection of the behavioral, cognitive, and emotionalmake up of a person. The factors that are responsible for the outcome of personality are influenced by the biological and environmental factors. If the person behaves abnormally, shows anxiety, impulsiveness, emotional disturbance, not able to take decisions, and quarrelsome all these factors can be indicative of personality disorder. Learn more about personality:

Evaporation followed by distillation is a physical process that  would allow you to isolate this salt after the acid-base titration occurs in solution.

Acids are defined as substances which on dissociation yield H+ ions , and these substances are sour in taste. Compounds  such as HCl, H₂SO₄ and HNO₃ are acids as they yield H+ ions on dissociation.

According to the number of H+ ions which are generated on dissociation acids are classified as mono-protic , di-protic ,tri-protic and polyprotic  acids  depending on the number of protons which are liberated on dissociation.They are separated by distillation.

Learn more about acids,here:

https://brainly.com/question/29796621

#SPJ1

Answer: the answer is money

Explanation:   money=happy person.

A vessel of 14.0 L would hold 1.78 moles of chlorine gas at 120.0 °C and 33.3 atm.

The ideal gas law relates the pressure (P), volume (V), temperature (T), and the number of moles (n) of a gas to a constant R known as the universal gas constant. In this equation, P, V, and T are directly proportional to n, which means that as the number of moles of gas increases, so does the pressure, volume, and temperature.

Using the ideal gas law, PV = nRT, we can solve for the number of moles of chlorine gas:

n = PV/RT

First, we need to convert the temperature to Kelvin by adding 273.15:

T = 120.0 + 273.15 = 393.15 K

Next, we can plug in the values we have:

n = (33.3 atm)(14.0 L)/(0.0821 L•atm/mol•K)(393.15 K)

n = 1.78 moles

Therefore, 1.78 moles of chlorine gas at 120.0 °C and 33.3 atm would occupy a vessel of 14.0 L.

To know more about the Chlorine gas, here

https://brainly.com/question/19782746

#SPJ1

Calculating the equilibrium constant (K) for a reaction requires knowing the balanced equation of the reaction. I won't be able to give the exact value of K without the exact reaction equation. However, I can explain how to use the concentrations provided to determine K.

An equilibrium constant statement for the reaction has the general form:

[tex]K = [C]^c[D]^d / [A]^a[B]^b[/tex]

In this case, let's assume the reaction is:

aA + bB ⇌ cC + dD

Given the initial and equilibrium concentrations of CO and Cl 2, the following values ​​can be applied to the concentrations:

[A] = [CO] (initial concentration)

[B] = [Cl2] (initial concentration)

[C] = [CO] (equilibrium concentration)

[D] = [Cl2] (equilibrium concentration)

Now that the concentration is determined, we can determine the equilibrium constant (K):

[tex]K = ([C]^c [D]^d) / ([A]^a [B]^b)K = ([CO]^c [Cl2]^d) / ([CO]^a [Cl2]^b)K = ([0.25]^c [0.15]^d) / ([0.79]^a [0.69]^b)[/tex]

The equilibrium constant (K) for the reaction can be obtained by substituting the values ​​of a, b, c and d based on the balanced equation and the specified concentration.

Learn more about equilibrium constant (K), here:

https://brainly.com/question/19671384

#SPJ1

To decrease 0.10 L of a 0.60 M KIO₃ solution, 670 mL of 0.45 M Na₂CrO₂ solution are required.

The balanced chemical equation for the reaction is:

6 IO₃⁻ + 3 CrO₂²⁻ + 24 OH⁻ → 3 CrO₄²⁻ + 6 I⁻ + 12 H₂O

First, we need to determine the limiting reactant between KIO₃ and Na₂CrO₂. To do this, we can use the stoichiometry of the balanced equation to convert the number of moles of each reactant to the number of moles of CrO₂²⁻ required:

0.60 mol KIO₃ x (3 mol CrO₂²⁻ / 6 mol IO₃⁻) = 0.30 mol CrO₂²⁻

We can also calculate the number of moles of CrO₂²⁻ available in the Na₂CrO₂ solution using its concentration and volume:

0.45 mol/L x V(L) = 0.30 mol CrO₂²⁻

Solving for V, we get:

V = 0.30 mol / 0.45 mol/L = 0.67 L = 670 mL

Therefore, 670 mL of the 0.45 M Na₂CrO₂ solution is needed to reduce 0.10 L of a 0.60 M KIO₃ solution.

To know more about the Solution, here

https://brainly.com/question/19047852

#SPJ1

a)The molarity of this solution is 0.07 M.

b)The hydronium ion concentration is 0.07 M, and the hydroxide ion concentration is approximately 1.43 x 10^(-13) M.

c)The pH ≈ 1.15 & pOH ≈ 12.85

d)This solution is an acid.

e)HNO₃ + NaOH → NaNO₃ + H₂O

f)HNO₃ is the acid.

NaOH is the base.

NaNO₃ is the conjugate acid of the base NaOH.

H₂O is the conjugate base of the acid HNO₃.

To find the molarity (M) of the solution, we need to calculate the number of moles of solute (hydrogen nitrate) and divide it by the volume of the solution in liters.

a.The molar mass of hydrogen nitrate (HNO3) is 63.01 g/mol.Moles of HNO3 = 3.31 g / 63.01 g/mol = 0.0526 mol

Volume of solution in liters = 750.0 mL / 1000 mL/L = 0.750 L

Molarity (M) = Moles of solute / Volume of solution in liters

M = 0.0526 mol / 0.750 L ≈ 0.070 M

b. Hydrogen nitrate (HNO3) dissociates in water to form hydronium ions (H3O+) and nitrate ions (NO3-). Since the compound is a strong acid, it fully dissociates. Thus, the concentration of hydronium ions and nitrate ions is the same as the molarity of the solution, which is 0.070 M.

c. The pH and pOH can be calculated using the formulas: pH = -log[H3O+] and pOH = -log[OH-]. Since the solution is acidic, [H3O+] = 0.070 M.

pH = -log(0.070) ≈ 1.155

pOH = 14 - pH ≈ 14 - 1.155 ≈ 12.845

d. This solution is an acid since it contains hydronium ions (H3O+), which are characteristic of acidic solutions.

e. The balanced chemical equation for the reaction between hydrogen nitrate (HNO3) and sodium hydroxide (NaOH) is:

HNO3 + NaOH -> NaNO3 + H2O

f. In this reaction, HNO3 acts as the acid (donates a proton, H+), NaOH acts as the base (accepts a proton, OH-), NaNO3 is the conjugate base of HNO3, and H2O is the conjugate acid of OH-.

For more such questions on molarity

https://brainly.com/question/30123776

#SPJ11

The ranking of the acids from strongest to weakest is: B) HI > A) HCl > D) H2S > C) H2O

To rank the acids from strongest to weakest, we need to consider their acid dissociation constants (Ka) or their respective pKa values. The lower the pKa value, the stronger the acid.

Here are the acids listed from strongest to weakest:

B) HI: Hydroiodic acid has a very low pKa value, indicating that it is a strong acid. It readily dissociates in water to release hydrogen ions (H+). HI is stronger than the other acids in the list.

A) HCl: Hydrochloric acid is also a strong acid with a low pKa value. It dissociates almost completely in water to produce H+ ions.

D) H2S: Hydrogen sulfide is a weak acid compared to HI and HCl. It has a higher pKa value, indicating that it does not dissociate as completely in water as the previous two acids. However, it still donates some hydrogen ions and exhibits acidic properties.

C) H2O: Water is considered a neutral substance with a pKa of 14. It can act as a weak acid or a weak base depending on the reaction it is involved in. In this list, it is the weakest acid. While it can donate a proton to form H+ ions, its tendency to do so is significantly lower compared to the other acids.

For more such question on acids visit:

https://brainly.com/question/27915098

#SPJ11

The removal of hydrogen or any other electropositive element, or the addition of oxygen, is said to be the process of oxidation in classical or earlier concepts. An atom or ion gains one or more electrons during the process of reduction.

1. The oxidation half-reaction of copper is:

Cu  → Cu²⁺ + 2e⁻

The reduction half is:

Cu²⁺ + 2e⁻ → Cu

3. An anode in electrochemistry is, in its simplest form, the site of an oxidation reaction. Due to the anode's electrical potential, negative ions or anions usually react there and release electrons. After that, these electrons ascend and enter the drive circuit.

In chemistry, the cathode is referred to as the electrode where reduction takes place. In an electrochemical cell, this is typical. Here, the cathode is negative because the cell's electrical energy supply causes chemical molecules to break down.

To know more about anode, visit;

https://brainly.com/question/17109743

#SPJ1

The correct term to describe Mg²+ is "ion."

An ion is an atom or molecule that has gained or lost electrons, resulting in a positive or negative charge. In the case of Mg²+, it indicates that the magnesium atom has lost two electrons, leading to a positive charge of +2. The term "subatomic particle" refers to particles that are smaller than an atom, such as protons, neutrons, and electrons. While Mg²+ does involve subatomic particles (protons and electrons), the term itself is not directly applicable to Mg²+. The term "element" refers to a pure substance composed of only one type of atom. Magnesium (Mg) is an element, but Mg²+ specifically refers to the ionized form of the magnesium atom. The term "molecule" refers to a combination of two or more atoms held together by chemical bonds. Since Mg²+ is an ion and does not involve bonding with other atoms, it is not considered a molecule. Therefore, the correct term to describe Mg²+ is "ion."

for more questions on ion
https://brainly.com/question/1310794
#SPJ11

Answer:

0.625g/mL

Explanation:

D=mass (grams) / Volume (mL or cm^3)

m=125g
V=200mL

D= 125g/200mL= 0.625g/mL

Answer:

The sound playing from the first graph is louder, while the sound from the second graph is deeper, both of which have the same pitch.

Explanation:

First let's analyze the graphs,
Comparing the first graph to the second

Concluding from the above observations, the sound playing from the first graph is louder, while the sound from the second graph is deeper, both of which have the same pitch.

a) There are approximately 1.75 grams of sulfuric acid in the sample.

b)The % error for this experiment is 66.67%.

The percent error for this experiment is approximately 66.67%.To find the number of grams of sulfuric acid in the sample, we can use the stoichiometry of the balanced chemical equation between sulfuric acid (H2SO4) and potassium hydroxide (KOH).

a.The balanced equation is:H2SO4 + 2KOH → K2SO4 + 2H2O

From the equation, we can see that one mole of sulfuric acid reacts with two moles of potassium hydroxide. Therefore, we need to determine the number of moles of potassium hydroxide used in the titration.

Volume of potassium hydroxide solution used = 142.5 mL = 0.1425 L

Moles of potassium hydroxide used = Molarity × Volume (in liters) = 0.25 M × 0.1425 L = 0.0356 moles

Since the ratio between sulfuric acid and potassium hydroxide is 1:2, the number of moles of sulfuric acid in the sample is half of the moles of potassium hydroxide used:

Moles of sulfuric acid = 0.0356 moles / 2 = 0.0178 moles

To convert moles to grams, we can use the molar mass of sulfuric acid, which is approximately 98.09 g/mol:

Mass of sulfuric acid = Moles × Molar mass = 0.0178 moles × 98.09 g/mol ≈ 1.75 grams

b. To calculate the percent error, we need to compare the experimental value (grams of sulfuric acid calculated in part a) with the expected value based on the labeled concentration.

Expected mass of sulfuric acid = Mass of sample × Percentage by mass = 35.0 g × 0.03 = 1.05 grams

Percent error = (|Experimental value - Expected value| / Expected value) × 100

Percent error = (|1.75 g - 1.05 g| / 1.05 g) × 100 ≈ 66.67%

For more such questions on percent error

https://brainly.com/question/29775517

#SPJ11

The population of weeds in an empty field would most likely be stable

It should be noted that weeds inhabiting an unattended field are expected to sustain relatively constant numbers over time due largely in part to their quick and easy reproductive capabilities.

This is complemented by their comparative resistance towards predation or disease when juxtaposed against other plant types they frequently cohabit with. Weeds can further endure hostile environmental factors better than most plants can, which adds complexity when attempting their control.

Learn about weed control here https://brainly.com/question/23804027

#SPJ1

The wind moves from high pressure area to low pressure area because of unequal heating and cooling of Earth's land and water surfaces

The movement of air or wind from a high pressure area to a low pressure area is due to the difference in air pressure between the two regions. High-pressure areas are characterized by relatively dense and cooler air that tends to sink, while low-pressure areas have relatively warm and less dense air that rises.

These differences in air pressure arise due to the unequal heating and cooling of the Earth's land and water surfaces. For instance, regions near the equator receive more direct sunlight, and hence, the air gets heated more quickly, leading to the formation of a low-pressure area.

Conversely, regions near the poles receive less direct sunlight, and hence, the air is cooler and denser, leading to the formation of a high-pressure area. As a result, air moves from high pressure to low pressure areas, creating winds and affecting the global climate.

For more question on pressure click on

https://brainly.com/question/24719118

#SPJ11

The chemical elements involved are; hydrogen, fluorine, boron and lithium

There are two hydrogen atoms, five fluorine atoms, one boron atom and one lithium atom.

Chemical compounds are represented symbolically by chemical formulas, which reveal the types and amounts of atoms that make up the compound. It is a succinct approach to explain a substance's makeup.

The components of a compound are identified in a chemical formula by their corresponding chemical symbols, which are typically derived from their English or Latin names. The number of atoms of each element in a single compound molecule is indicated by the subscripts that follow each element.

Learn more about chemical formula:https://brainly.com/question/32018188

#SPJ1

10.0 mL of ammonia will be formed when 10 cm^3 of nitrogen and 20 cm^3 of hydrogen react.

The reaction between nitrogen and hydrogen produces ammonia according to the equation:

N2 + 3H2 → 2NH3

This equation tells us that 1 mole of nitrogen reacts with 3 moles of hydrogen to produce 2 moles of ammonia. However, we need to know the amount of each gas in order to calculate the volume of ammonia formed.

To do this, we can use the ideal gas law, which states that PV = nRT, where P is the pressure of the gas, V is the volume of the gas, n is the number of moles of the gas, R is the gas constant, and T is the temperature of the gas.

Assuming that the gases are at the same temperature and pressure, we can use the volumes of the gases to calculate their respective number of moles:

n(N2) = V(N2) / V(molar volume of gas at STP) = 10 cm^3 / 24.45 L/mol = 0.000409 mol

n(H2) = V(H2) / V(molar volume of gas at STP) = 20 cm^3 / 24.45 L/mol = 0.000818 mol

Since nitrogen and hydrogen react in a 1:3 ratio, the limiting reactant is nitrogen. Therefore, only 0.000409 mol of ammonia will be produced. We can convert this to volume using the molar volume of gas at STP:

V(NH3) = n(NH3) × V(molar volume of gas at STP) = 0.000409 mol × 24.45 L/mol = 0.01 L = 10.0 mL

Therefore, 10.0 mL of ammonia will be formed when 10 cm^3 of nitrogen and 20 cm^3 of hydrogen react.

For more such questions on ammonia

https://brainly.com/question/28905131

#SPJ11

Answer:

5l NO

2

at STP

No. of molecules=

22.4

5

mol=

22.4

5

×N

A

molecules

A) 5ℊ of H

2

(g)

No. of moles=

2

5

mol=

2

5

×N

A

molecules

B) 5l of CH

4

(g)

No. of moles of CH

4

=

22.4

5

mol=

22.4

5

N

A

molecules

C) 5 mol of O

2

=5N

A

O

2

molecules

D) 5×10

23

molecules of CO

2

(g)

Molecules of 5l NO

2

(g) at STP=5l of CH

4

(g) molecules at STP

Therefore, option B is correct.

Was this answer helpful?

The number of moles of the sodium chlroide from the calculation is 0.11 moles.

We can connect a substance's mass to its particle count using the concept of a mole. A material's molar mass, which is measured in grams per mole, is the mass of one mole of that substance. One mole of carbon-12 atoms, for instance, weighs 12 grams according to its molar mass of 12 grams/mol.

We have that;

Number of moles = Mass/molar mass

mass = 6.37 grams

Molar mass =  58.5 g/mol

Number of moles = 6.37 g/58.5 g/mol

= 0.11 moles

Learn more about mole:https://brainly.com/question/30892840

#SPJ1

Answer is Answer

Explanation:

The three correct answers about the reactants they used for a successful reaction are:

The collision theory states that successful chemical reactions occur when reactant particles collide with each other with sufficient energy and proper orientation.

Based on the collision theory,  for a successful reaction to occur, the reactants must collide with each other with sufficient energy (activation energy) and in the correct orientation.

Learn more about the collision theory at: https://brainly.com/question/20628781

#SPJ1

Complete question:

For this question, choose THREE answers. A student adds two chemicals together in lab and observes a successful reaction. Which of the following can be assumed about the reactants they used?

They had the minimum activation energy.

They did not have the minimum activation energy.

They were not oriented in the correct direction.

They were oriented in the correct direction.

They did not successfully collide with each other.

They successfully collided with each other.

Answer:

Explanation:

The matching of each decimal number to the correct scientific notation is as follows:

3.07 x 10^-6 -> D) 3.07 x 10^-6

3.07 x 10^6 -> B) 3.07 x 10^6

3.07 x 10^-4 -> A) 3.07 x 10^-4

3.07 x 10^4 -> C) 3.07 x 10^4

So, the correct matching is:

D) 3.07 x 10^-6

B) 3.07 x 10^6

A) 3.07 x 10^-4

C) 3.07 x 10^4